| |
| /* Driver for the Iomega MatchMaker parallel port SCSI HBA embedded in |
| * the Iomega ZIP Plus drive |
| * |
| * (c) 1998 David Campbell |
| * |
| * Please note that I live in Perth, Western Australia. GMT+0800 |
| */ |
| |
| #ifndef _IMM_H |
| #define _IMM_H |
| |
| #define IMM_VERSION "2.05 (for Linux 2.4.0)" |
| |
| /* |
| * 10 Apr 1998 (Good Friday) - Received EN144302 by email from Iomega. |
| * Scarry thing is the level of support from one of their managers. |
| * The onus is now on us (the developers) to shut up and start coding. |
| * 11Apr98 [ 0.10 ] |
| * |
| * --- SNIP --- |
| * |
| * It manages to find the drive which is a good start. Writing data during |
| * data phase is known to be broken (due to requirements of two byte writes). |
| * Removing "Phase" debug messages. |
| * |
| * PS: Took four hours of coding after I bought a drive. |
| * ANZAC Day (Aus "War Veterans Holiday") 25Apr98 [ 0.14 ] |
| * |
| * Ten minutes later after a few fixes.... (LITERALLY!!!) |
| * Have mounted disk, copied file, dismounted disk, remount disk, diff file |
| * ----- It actually works!!! ----- |
| * 25Apr98 [ 0.15 ] |
| * |
| * Twenty minutes of mucking around, rearanged the IEEE negotiate mechanism. |
| * Now have byte mode working (only EPP and ECP to go now... :=) |
| * 26Apr98 [ 0.16 ] |
| * |
| * Thirty minutes of further coding results in EPP working on my machine. |
| * 27Apr98 [ 0.17 ] |
| * |
| * Due to work commitments and inability to get a "true" ECP mode functioning |
| * I have decided to code the parport support into imm. |
| * 09Jun98 [ 0.18 ] |
| * |
| * Driver is now out of beta testing. |
| * Support for parport has been added. |
| * Now distributed with the ppa driver. |
| * 12Jun98 [ 2.00 ] |
| * |
| * Err.. It appears that imm-2.00 was broken.... |
| * 18Jun98 [ 2.01 ] |
| * |
| * Patch applied to sync this against the Linux 2.1.x kernel code |
| * Included qboot_zip.sh |
| * 21Jun98 [ 2.02 ] |
| * |
| * Other clean ups include the follow changes: |
| * CONFIG_SCSI_PPA_HAVE_PEDANTIC => CONFIG_SCSI_IZIP_EPP16 |
| * added CONFIG_SCSI_IZIP_SLOW_CTR option |
| * [2.03] |
| * Fix kernel panic on scsi timeout. 20Aug00 [2.04] |
| * |
| * Avoid io_request_lock problems. |
| * John Cavan <johncavan@home.com> 16Nov00 [2.05] |
| */ |
| /* ------ END OF USER CONFIGURABLE PARAMETERS ----- */ |
| |
| #include <linux/config.h> |
| #include <linux/stddef.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/blkdev.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/io.h> |
| #include <scsi/scsi_host.h> |
| /* batteries not included :-) */ |
| |
| /* |
| * modes in which the driver can operate |
| */ |
| #define IMM_AUTODETECT 0 /* Autodetect mode */ |
| #define IMM_NIBBLE 1 /* work in standard 4 bit mode */ |
| #define IMM_PS2 2 /* PS/2 byte mode */ |
| #define IMM_EPP_8 3 /* EPP mode, 8 bit */ |
| #define IMM_EPP_16 4 /* EPP mode, 16 bit */ |
| #define IMM_EPP_32 5 /* EPP mode, 32 bit */ |
| #define IMM_UNKNOWN 6 /* Just in case... */ |
| |
| static char *IMM_MODE_STRING[] = |
| { |
| [IMM_AUTODETECT] = "Autodetect", |
| [IMM_NIBBLE] = "SPP", |
| [IMM_PS2] = "PS/2", |
| [IMM_EPP_8] = "EPP 8 bit", |
| [IMM_EPP_16] = "EPP 16 bit", |
| #ifdef CONFIG_SCSI_IZIP_EPP16 |
| [IMM_EPP_32] = "EPP 16 bit", |
| #else |
| [IMM_EPP_32] = "EPP 32 bit", |
| #endif |
| [IMM_UNKNOWN] = "Unknown", |
| }; |
| |
| /* other options */ |
| #define IMM_BURST_SIZE 512 /* data burst size */ |
| #define IMM_SELECT_TMO 500 /* 500 how long to wait for target ? */ |
| #define IMM_SPIN_TMO 5000 /* 50000 imm_wait loop limiter */ |
| #define IMM_DEBUG 0 /* debugging option */ |
| #define IN_EPP_MODE(x) (x == IMM_EPP_8 || x == IMM_EPP_16 || x == IMM_EPP_32) |
| |
| /* args to imm_connect */ |
| #define CONNECT_EPP_MAYBE 1 |
| #define CONNECT_NORMAL 0 |
| |
| #define r_dtr(x) (unsigned char)inb((x)) |
| #define r_str(x) (unsigned char)inb((x)+1) |
| #define r_ctr(x) (unsigned char)inb((x)+2) |
| #define r_epp(x) (unsigned char)inb((x)+4) |
| #define r_fifo(x) (unsigned char)inb((x)) /* x must be base_hi */ |
| /* On PCI is: base+0x400 != base_hi */ |
| #define r_ecr(x) (unsigned char)inb((x)+2) /* x must be base_hi */ |
| |
| #define w_dtr(x,y) outb(y, (x)) |
| #define w_str(x,y) outb(y, (x)+1) |
| #define w_epp(x,y) outb(y, (x)+4) |
| #define w_fifo(x,y) outb(y, (x)) /* x must be base_hi */ |
| #define w_ecr(x,y) outb(y, (x)+0x2) /* x must be base_hi */ |
| |
| #ifdef CONFIG_SCSI_IZIP_SLOW_CTR |
| #define w_ctr(x,y) outb_p(y, (x)+2) |
| #else |
| #define w_ctr(x,y) outb(y, (x)+2) |
| #endif |
| |
| static int imm_engine(imm_struct *, struct scsi_cmnd *); |
| |
| #endif /* _IMM_H */ |