include/asm-arm/arch-omap/irqs.h - kernel/msm-4.9 - Gitiles

 /*
  *  linux/include/asm-arm/arch-omap/irqs.h
  *
  *  Copyright (C) Greg Lonnon 2001
  *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
  *	 are different.
  */

 #ifndef __ASM_ARCH_OMAP15XX_IRQS_H
 #define __ASM_ARCH_OMAP15XX_IRQS_H

 /*
  * IRQ numbers for interrupt handler 1
  *
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  *
  */
 #define INT_CAMERA		1
 #define INT_FIQ			3
 #define INT_RTDX		6
 #define INT_DSP_MMU_ABORT	7
 #define INT_HOST		8
 #define INT_ABORT		9
 #define INT_DSP_MAILBOX1	10
 #define INT_DSP_MAILBOX2	11
 #define INT_BRIDGE_PRIV		13
 #define INT_GPIO_BANK1		14
 #define INT_UART3		15
 #define INT_TIMER3		16
 #define INT_DMA_CH0_6		19
 #define INT_DMA_CH1_7		20
 #define INT_DMA_CH2_8		21
 #define INT_DMA_CH3		22
 #define INT_DMA_CH4		23
 #define INT_DMA_CH5		24
 #define INT_DMA_LCD		25
 #define INT_TIMER1		26
 #define INT_WD_TIMER		27
 #define INT_BRIDGE_PUB		28
 #define INT_TIMER2		30
 #define INT_LCD_CTRL		31

 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 1
  */
 #define INT_1510_IH2_IRQ	0
 #define INT_1510_RES2		2
 #define INT_1510_SPI_TX		4
 #define INT_1510_SPI_RX		5
 #define INT_1510_RES12		12
 #define INT_1510_LB_MMU		17
 #define INT_1510_RES18		18
 #define INT_1510_LOCAL_BUS	29

 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 1
  */
 #define INT_1610_IH2_IRQ	0
 #define INT_1610_IH2_FIQ	2
 #define INT_1610_McBSP2_TX	4
 #define INT_1610_McBSP2_RX	5
 #define INT_1610_LCD_LINE	12
 #define INT_1610_GPTIMER1	17
 #define INT_1610_GPTIMER2	18
 #define INT_1610_SSR_FIFO_0	29

 /*
  * OMAP-730 specific IRQ numbers for interrupt handler 1
  */
 #define INT_730_IH2_FIQ		0
 #define INT_730_IH2_IRQ		1
 #define INT_730_USB_NON_ISO	2
 #define INT_730_USB_ISO		3
 #define INT_730_ICR		4
 #define INT_730_EAC		5
 #define INT_730_GPIO_BANK1	6
 #define INT_730_GPIO_BANK2	7
 #define INT_730_GPIO_BANK3	8
 #define INT_730_McBSP2TX	10
 #define INT_730_McBSP2RX	11
 #define INT_730_McBSP2RX_OVF	12
 #define INT_730_LCD_LINE	14
 #define INT_730_GSM_PROTECT	15
 #define INT_730_TIMER3		16
 #define INT_730_GPIO_BANK5	17
 #define INT_730_GPIO_BANK6	18
 #define INT_730_SPGIO_WR	29

 /*
  * IRQ numbers for interrupt handler 2
  *
  * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
  */
 #define IH2_BASE		32

 #define INT_KEYBOARD		(1 + IH2_BASE)
 #define INT_uWireTX		(2 + IH2_BASE)
 #define INT_uWireRX		(3 + IH2_BASE)
 #define INT_I2C			(4 + IH2_BASE)
 #define INT_MPUIO		(5 + IH2_BASE)
 #define INT_USB_HHC_1		(6 + IH2_BASE)
 #define INT_McBSP3TX		(10 + IH2_BASE)
 #define INT_McBSP3RX		(11 + IH2_BASE)
 #define INT_McBSP1TX		(12 + IH2_BASE)
 #define INT_McBSP1RX		(13 + IH2_BASE)
 #define INT_UART1		(14 + IH2_BASE)
 #define INT_UART2		(15 + IH2_BASE)
 #define INT_BT_MCSI1TX		(16 + IH2_BASE)
 #define INT_BT_MCSI1RX		(17 + IH2_BASE)
 #define INT_USB_W2FC		(20 + IH2_BASE)
 #define INT_1WIRE		(21 + IH2_BASE)
 #define INT_OS_TIMER		(22 + IH2_BASE)
 #define INT_MMC			(23 + IH2_BASE)
 #define INT_GAUGE_32K		(24 + IH2_BASE)
 #define INT_RTC_TIMER		(25 + IH2_BASE)
 #define INT_RTC_ALARM		(26 + IH2_BASE)
 #define INT_MEM_STICK		(27 + IH2_BASE)
 #define INT_DSP_MMU		(28 + IH2_BASE)

 /*
  * OMAP-1510 specific IRQ numbers for interrupt handler 2
  */
 #define INT_1510_COM_SPI_RO	(31 + IH2_BASE)

 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 2
  */
 #define INT_1610_FAC		(0 + IH2_BASE)
 #define INT_1610_USB_HHC_2	(7 + IH2_BASE)
 #define INT_1610_USB_OTG	(8 + IH2_BASE)
 #define INT_1610_SoSSI		(9 + IH2_BASE)
 #define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
 #define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
 #define INT_1610_STI		(32 + IH2_BASE)
 #define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
 #define INT_1610_GPTIMER3	(34 + IH2_BASE)
 #define INT_1610_GPTIMER4	(35 + IH2_BASE)
 #define INT_1610_GPTIMER5	(36 + IH2_BASE)
 #define INT_1610_GPTIMER6	(37 + IH2_BASE)
 #define INT_1610_GPTIMER7	(38 + IH2_BASE)
 #define INT_1610_GPTIMER8	(39 + IH2_BASE)
 #define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
 #define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
 #define INT_1610_MMC2		(42 + IH2_BASE)
 #define INT_1610_CF		(43 + IH2_BASE)
 #define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
 #define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
 #define INT_1610_SPI		(49 + IH2_BASE)
 #define INT_1610_DMA_CH6	(53 + IH2_BASE)
 #define INT_1610_DMA_CH7	(54 + IH2_BASE)
 #define INT_1610_DMA_CH8	(55 + IH2_BASE)
 #define INT_1610_DMA_CH9	(56 + IH2_BASE)
 #define INT_1610_DMA_CH10	(57 + IH2_BASE)
 #define INT_1610_DMA_CH11	(58 + IH2_BASE)
 #define INT_1610_DMA_CH12	(59 + IH2_BASE)
 #define INT_1610_DMA_CH13	(60 + IH2_BASE)
 #define INT_1610_DMA_CH14	(61 + IH2_BASE)
 #define INT_1610_DMA_CH15	(62 + IH2_BASE)
 #define INT_1610_NAND		(63 + IH2_BASE)

 /*
  * OMAP-730 specific IRQ numbers for interrupt handler 2
  */
 #define INT_730_HW_ERRORS	(0 + IH2_BASE)
 #define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
 #define INT_730_CFCD		(2 + IH2_BASE)
 #define INT_730_CFIREQ		(3 + IH2_BASE)
 #define INT_730_I2C		(4 + IH2_BASE)
 #define INT_730_PCC		(5 + IH2_BASE)
 #define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
 #define INT_730_SPI_100K_1	(7 + IH2_BASE)
 #define INT_730_SYREN_SPI	(8 + IH2_BASE)
 #define INT_730_VLYNQ		(9 + IH2_BASE)
 #define INT_730_GPIO_BANK4	(10 + IH2_BASE)
 #define INT_730_McBSP1TX	(11 + IH2_BASE)
 #define INT_730_McBSP1RX	(12 + IH2_BASE)
 #define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
 #define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
 #define INT_730_UART_MODEM_1	(15 + IH2_BASE)
 #define INT_730_MCSI		(16 + IH2_BASE)
 #define INT_730_uWireTX		(17 + IH2_BASE)
 #define INT_730_uWireRX		(18 + IH2_BASE)
 #define INT_730_SMC_CD		(19 + IH2_BASE)
 #define INT_730_SMC_IREQ	(20 + IH2_BASE)
 #define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
 #define INT_730_TIMER32K	(22 + IH2_BASE)
 #define INT_730_MMC_SDIO	(23 + IH2_BASE)
 #define INT_730_UPLD		(24 + IH2_BASE)
 #define INT_730_USB_HHC_1	(27 + IH2_BASE)
 #define INT_730_USB_HHC_2	(28 + IH2_BASE)
 #define INT_730_USB_GENI	(29 + IH2_BASE)
 #define INT_730_USB_OTG		(30 + IH2_BASE)
 #define INT_730_CAMERA_IF	(31 + IH2_BASE)
 #define INT_730_RNG		(32 + IH2_BASE)
 #define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
 #define INT_730_DBB_RF_EN	(34 + IH2_BASE)
 #define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
 #define INT_730_SHA1_MD5	(36 + IH2_BASE)
 #define INT_730_SPI_100K_2	(37 + IH2_BASE)
 #define INT_730_RNG_IDLE	(38 + IH2_BASE)
 #define INT_730_MPUIO		(39 + IH2_BASE)
 #define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
 #define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
 #define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
 #define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
 #define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
 #define INT_730_DMA_CH6		(53 + IH2_BASE)
 #define INT_730_DMA_CH7		(54 + IH2_BASE)
 #define INT_730_DMA_CH8		(55 + IH2_BASE)
 #define INT_730_DMA_CH9		(56 + IH2_BASE)
 #define INT_730_DMA_CH10	(57 + IH2_BASE)
 #define INT_730_DMA_CH11	(58 + IH2_BASE)
 #define INT_730_DMA_CH12	(59 + IH2_BASE)
 #define INT_730_DMA_CH13	(60 + IH2_BASE)
 #define INT_730_DMA_CH14	(61 + IH2_BASE)
 #define INT_730_DMA_CH15	(62 + IH2_BASE)
 #define INT_730_NAND		(63 + IH2_BASE)

 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
 #define INT_24XX_SDMA_IRQ1	13
 #define INT_24XX_SDMA_IRQ2	14
 #define INT_24XX_SDMA_IRQ3	15
 #define INT_24XX_DSS_IRQ	25
 #define INT_24XX_GPIO_BANK1	29
 #define INT_24XX_GPIO_BANK2	30
 #define INT_24XX_GPIO_BANK3	31
 #define INT_24XX_GPIO_BANK4	32

 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
  * 16 MPUIO lines */
 #define OMAP_MAX_GPIO_LINES	192
 #define IH_GPIO_BASE		(128 + IH2_BASE)
 #define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
 #define IH_BOARD_BASE		(16 + IH_MPUIO_BASE)

 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))

 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
 #endif

 /*
  * The definition of NR_IRQS is in board-specific header file, which is
  * included via hardware.h
  */
 #include <asm/hardware.h>

 #ifndef NR_IRQS
 #define NR_IRQS                 IH_BOARD_BASE
 #endif

 #endif
	/*
	* linux/include/asm-arm/arch-omap/irqs.h
	*
	* Copyright (C) Greg Lonnon 2001
	* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	* NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
	* are different.
	*/

	#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
	#define __ASM_ARCH_OMAP15XX_IRQS_H

	/*
	* IRQ numbers for interrupt handler 1
	*
	* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
	*
	*/
	#define INT_CAMERA 1
	#define INT_FIQ 3
	#define INT_RTDX 6
	#define INT_DSP_MMU_ABORT 7
	#define INT_HOST 8
	#define INT_ABORT 9
	#define INT_DSP_MAILBOX1 10
	#define INT_DSP_MAILBOX2 11
	#define INT_BRIDGE_PRIV 13
	#define INT_GPIO_BANK1 14
	#define INT_UART3 15
	#define INT_TIMER3 16
	#define INT_DMA_CH0_6 19
	#define INT_DMA_CH1_7 20
	#define INT_DMA_CH2_8 21
	#define INT_DMA_CH3 22
	#define INT_DMA_CH4 23
	#define INT_DMA_CH5 24
	#define INT_DMA_LCD 25
	#define INT_TIMER1 26
	#define INT_WD_TIMER 27
	#define INT_BRIDGE_PUB 28
	#define INT_TIMER2 30
	#define INT_LCD_CTRL 31

	/*
	* OMAP-1510 specific IRQ numbers for interrupt handler 1
	*/
	#define INT_1510_IH2_IRQ 0
	#define INT_1510_RES2 2
	#define INT_1510_SPI_TX 4
	#define INT_1510_SPI_RX 5
	#define INT_1510_RES12 12
	#define INT_1510_LB_MMU 17
	#define INT_1510_RES18 18
	#define INT_1510_LOCAL_BUS 29

	/*
	* OMAP-1610 specific IRQ numbers for interrupt handler 1
	*/
	#define INT_1610_IH2_IRQ 0
	#define INT_1610_IH2_FIQ 2
	#define INT_1610_McBSP2_TX 4
	#define INT_1610_McBSP2_RX 5
	#define INT_1610_LCD_LINE 12
	#define INT_1610_GPTIMER1 17
	#define INT_1610_GPTIMER2 18
	#define INT_1610_SSR_FIFO_0 29

	/*
	* OMAP-730 specific IRQ numbers for interrupt handler 1
	*/
	#define INT_730_IH2_FIQ 0
	#define INT_730_IH2_IRQ 1
	#define INT_730_USB_NON_ISO 2
	#define INT_730_USB_ISO 3
	#define INT_730_ICR 4
	#define INT_730_EAC 5
	#define INT_730_GPIO_BANK1 6
	#define INT_730_GPIO_BANK2 7
	#define INT_730_GPIO_BANK3 8
	#define INT_730_McBSP2TX 10
	#define INT_730_McBSP2RX 11
	#define INT_730_McBSP2RX_OVF 12
	#define INT_730_LCD_LINE 14
	#define INT_730_GSM_PROTECT 15
	#define INT_730_TIMER3 16
	#define INT_730_GPIO_BANK5 17
	#define INT_730_GPIO_BANK6 18
	#define INT_730_SPGIO_WR 29

	/*
	* IRQ numbers for interrupt handler 2
	*
	* NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
	*/
	#define IH2_BASE 32

	#define INT_KEYBOARD (1 + IH2_BASE)
	#define INT_uWireTX (2 + IH2_BASE)
	#define INT_uWireRX (3 + IH2_BASE)
	#define INT_I2C (4 + IH2_BASE)
	#define INT_MPUIO (5 + IH2_BASE)
	#define INT_USB_HHC_1 (6 + IH2_BASE)
	#define INT_McBSP3TX (10 + IH2_BASE)
	#define INT_McBSP3RX (11 + IH2_BASE)
	#define INT_McBSP1TX (12 + IH2_BASE)
	#define INT_McBSP1RX (13 + IH2_BASE)
	#define INT_UART1 (14 + IH2_BASE)
	#define INT_UART2 (15 + IH2_BASE)
	#define INT_BT_MCSI1TX (16 + IH2_BASE)
	#define INT_BT_MCSI1RX (17 + IH2_BASE)
	#define INT_USB_W2FC (20 + IH2_BASE)
	#define INT_1WIRE (21 + IH2_BASE)
	#define INT_OS_TIMER (22 + IH2_BASE)
	#define INT_MMC (23 + IH2_BASE)
	#define INT_GAUGE_32K (24 + IH2_BASE)
	#define INT_RTC_TIMER (25 + IH2_BASE)
	#define INT_RTC_ALARM (26 + IH2_BASE)
	#define INT_MEM_STICK (27 + IH2_BASE)
	#define INT_DSP_MMU (28 + IH2_BASE)

	/*
	* OMAP-1510 specific IRQ numbers for interrupt handler 2
	*/
	#define INT_1510_COM_SPI_RO (31 + IH2_BASE)

	/*
	* OMAP-1610 specific IRQ numbers for interrupt handler 2
	*/
	#define INT_1610_FAC (0 + IH2_BASE)
	#define INT_1610_USB_HHC_2 (7 + IH2_BASE)
	#define INT_1610_USB_OTG (8 + IH2_BASE)
	#define INT_1610_SoSSI (9 + IH2_BASE)
	#define INT_1610_SoSSI_MATCH (19 + IH2_BASE)
	#define INT_1610_McBSP2RX_OF (31 + IH2_BASE)
	#define INT_1610_STI (32 + IH2_BASE)
	#define INT_1610_STI_WAKEUP (33 + IH2_BASE)
	#define INT_1610_GPTIMER3 (34 + IH2_BASE)
	#define INT_1610_GPTIMER4 (35 + IH2_BASE)
	#define INT_1610_GPTIMER5 (36 + IH2_BASE)
	#define INT_1610_GPTIMER6 (37 + IH2_BASE)
	#define INT_1610_GPTIMER7 (38 + IH2_BASE)
	#define INT_1610_GPTIMER8 (39 + IH2_BASE)
	#define INT_1610_GPIO_BANK2 (40 + IH2_BASE)
	#define INT_1610_GPIO_BANK3 (41 + IH2_BASE)
	#define INT_1610_MMC2 (42 + IH2_BASE)
	#define INT_1610_CF (43 + IH2_BASE)
	#define INT_1610_WAKE_UP_REQ (46 + IH2_BASE)
	#define INT_1610_GPIO_BANK4 (48 + IH2_BASE)
	#define INT_1610_SPI (49 + IH2_BASE)
	#define INT_1610_DMA_CH6 (53 + IH2_BASE)
	#define INT_1610_DMA_CH7 (54 + IH2_BASE)
	#define INT_1610_DMA_CH8 (55 + IH2_BASE)
	#define INT_1610_DMA_CH9 (56 + IH2_BASE)
	#define INT_1610_DMA_CH10 (57 + IH2_BASE)
	#define INT_1610_DMA_CH11 (58 + IH2_BASE)
	#define INT_1610_DMA_CH12 (59 + IH2_BASE)
	#define INT_1610_DMA_CH13 (60 + IH2_BASE)
	#define INT_1610_DMA_CH14 (61 + IH2_BASE)
	#define INT_1610_DMA_CH15 (62 + IH2_BASE)
	#define INT_1610_NAND (63 + IH2_BASE)

	/*
	* OMAP-730 specific IRQ numbers for interrupt handler 2
	*/
	#define INT_730_HW_ERRORS (0 + IH2_BASE)
	#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE)
	#define INT_730_CFCD (2 + IH2_BASE)
	#define INT_730_CFIREQ (3 + IH2_BASE)
	#define INT_730_I2C (4 + IH2_BASE)
	#define INT_730_PCC (5 + IH2_BASE)
	#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE)
	#define INT_730_SPI_100K_1 (7 + IH2_BASE)
	#define INT_730_SYREN_SPI (8 + IH2_BASE)
	#define INT_730_VLYNQ (9 + IH2_BASE)
	#define INT_730_GPIO_BANK4 (10 + IH2_BASE)
	#define INT_730_McBSP1TX (11 + IH2_BASE)
	#define INT_730_McBSP1RX (12 + IH2_BASE)
	#define INT_730_McBSP1RX_OF (13 + IH2_BASE)
	#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
	#define INT_730_UART_MODEM_1 (15 + IH2_BASE)
	#define INT_730_MCSI (16 + IH2_BASE)
	#define INT_730_uWireTX (17 + IH2_BASE)
	#define INT_730_uWireRX (18 + IH2_BASE)
	#define INT_730_SMC_CD (19 + IH2_BASE)
	#define INT_730_SMC_IREQ (20 + IH2_BASE)
	#define INT_730_HDQ_1WIRE (21 + IH2_BASE)
	#define INT_730_TIMER32K (22 + IH2_BASE)
	#define INT_730_MMC_SDIO (23 + IH2_BASE)
	#define INT_730_UPLD (24 + IH2_BASE)
	#define INT_730_USB_HHC_1 (27 + IH2_BASE)
	#define INT_730_USB_HHC_2 (28 + IH2_BASE)
	#define INT_730_USB_GENI (29 + IH2_BASE)
	#define INT_730_USB_OTG (30 + IH2_BASE)
	#define INT_730_CAMERA_IF (31 + IH2_BASE)
	#define INT_730_RNG (32 + IH2_BASE)
	#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
	#define INT_730_DBB_RF_EN (34 + IH2_BASE)
	#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE)
	#define INT_730_SHA1_MD5 (36 + IH2_BASE)
	#define INT_730_SPI_100K_2 (37 + IH2_BASE)
	#define INT_730_RNG_IDLE (38 + IH2_BASE)
	#define INT_730_MPUIO (39 + IH2_BASE)
	#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE)
	#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
	#define INT_730_LLPC_OE_RISING (42 + IH2_BASE)
	#define INT_730_LLPC_VSYNC (43 + IH2_BASE)
	#define INT_730_WAKE_UP_REQ (46 + IH2_BASE)
	#define INT_730_DMA_CH6 (53 + IH2_BASE)
	#define INT_730_DMA_CH7 (54 + IH2_BASE)
	#define INT_730_DMA_CH8 (55 + IH2_BASE)
	#define INT_730_DMA_CH9 (56 + IH2_BASE)
	#define INT_730_DMA_CH10 (57 + IH2_BASE)
	#define INT_730_DMA_CH11 (58 + IH2_BASE)
	#define INT_730_DMA_CH12 (59 + IH2_BASE)
	#define INT_730_DMA_CH13 (60 + IH2_BASE)
	#define INT_730_DMA_CH14 (61 + IH2_BASE)
	#define INT_730_DMA_CH15 (62 + IH2_BASE)
	#define INT_730_NAND (63 + IH2_BASE)

	#define INT_24XX_SYS_NIRQ 7
	#define INT_24XX_SDMA_IRQ0 12
	#define INT_24XX_SDMA_IRQ1 13
	#define INT_24XX_SDMA_IRQ2 14
	#define INT_24XX_SDMA_IRQ3 15
	#define INT_24XX_DSS_IRQ 25
	#define INT_24XX_GPIO_BANK1 29
	#define INT_24XX_GPIO_BANK2 30
	#define INT_24XX_GPIO_BANK3 31
	#define INT_24XX_GPIO_BANK4 32

	/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
	* 16 MPUIO lines */
	#define OMAP_MAX_GPIO_LINES 192
	#define IH_GPIO_BASE (128 + IH2_BASE)
	#define IH_MPUIO_BASE (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
	#define IH_BOARD_BASE (16 + IH_MPUIO_BASE)

	#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))

	#ifndef __ASSEMBLY__
	extern void omap_init_irq(void);
	#endif

	/*
	* The definition of NR_IRQS is in board-specific header file, which is
	* included via hardware.h
	*/
	#include <asm/hardware.h>

	#ifndef NR_IRQS
	#define NR_IRQS IH_BOARD_BASE
	#endif

	#endif