| /* linux/drivers/video/exynos/exynos_mipi_dsi_common.c |
| * |
| * Samsung SoC MIPI-DSI common driver. |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd |
| * |
| * InKi Dae, <inki.dae@samsung.com> |
| * Donghwa Lee, <dh09.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/mutex.h> |
| #include <linux/wait.h> |
| #include <linux/fs.h> |
| #include <linux/mm.h> |
| #include <linux/fb.h> |
| #include <linux/ctype.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/memory.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| |
| #include <video/mipi_display.h> |
| #include <video/exynos_mipi_dsim.h> |
| |
| #include <mach/map.h> |
| |
| #include "exynos_mipi_dsi_regs.h" |
| #include "exynos_mipi_dsi_lowlevel.h" |
| #include "exynos_mipi_dsi_common.h" |
| |
| #define MIPI_FIFO_TIMEOUT msecs_to_jiffies(250) |
| #define MIPI_RX_FIFO_READ_DONE 0x30800002 |
| #define MIPI_MAX_RX_FIFO 20 |
| #define MHZ (1000 * 1000) |
| #define FIN_HZ (24 * MHZ) |
| |
| #define DFIN_PLL_MIN_HZ (6 * MHZ) |
| #define DFIN_PLL_MAX_HZ (12 * MHZ) |
| |
| #define DFVCO_MIN_HZ (500 * MHZ) |
| #define DFVCO_MAX_HZ (1000 * MHZ) |
| |
| #define TRY_GET_FIFO_TIMEOUT (5000 * 2) |
| #define TRY_FIFO_CLEAR (10) |
| |
| /* MIPI-DSIM status types. */ |
| enum { |
| DSIM_STATE_INIT, /* should be initialized. */ |
| DSIM_STATE_STOP, /* CPU and LCDC are LP mode. */ |
| DSIM_STATE_HSCLKEN, /* HS clock was enabled. */ |
| DSIM_STATE_ULPS |
| }; |
| |
| /* define DSI lane types. */ |
| enum { |
| DSIM_LANE_CLOCK = (1 << 0), |
| DSIM_LANE_DATA0 = (1 << 1), |
| DSIM_LANE_DATA1 = (1 << 2), |
| DSIM_LANE_DATA2 = (1 << 3), |
| DSIM_LANE_DATA3 = (1 << 4) |
| }; |
| |
| static unsigned int dpll_table[15] = { |
| 100, 120, 170, 220, 270, |
| 320, 390, 450, 510, 560, |
| 640, 690, 770, 870, 950 |
| }; |
| |
| irqreturn_t exynos_mipi_dsi_interrupt_handler(int irq, void *dev_id) |
| { |
| struct mipi_dsim_device *dsim = dev_id; |
| unsigned int intsrc, intmsk; |
| |
| intsrc = exynos_mipi_dsi_read_interrupt(dsim); |
| intmsk = exynos_mipi_dsi_read_interrupt_mask(dsim); |
| intmsk = ~intmsk & intsrc; |
| |
| if (intsrc & INTMSK_RX_DONE) { |
| complete(&dsim_rd_comp); |
| dev_dbg(dsim->dev, "MIPI INTMSK_RX_DONE\n"); |
| } |
| if (intsrc & INTMSK_FIFO_EMPTY) { |
| complete(&dsim_wr_comp); |
| dev_dbg(dsim->dev, "MIPI INTMSK_FIFO_EMPTY\n"); |
| } |
| |
| exynos_mipi_dsi_clear_interrupt(dsim, intmsk); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * write long packet to mipi dsi slave |
| * @dsim: mipi dsim device structure. |
| * @data0: packet data to send. |
| * @data1: size of packet data |
| */ |
| static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, |
| const unsigned char *data0, unsigned int data_size) |
| { |
| unsigned int data_cnt = 0, payload = 0; |
| |
| /* in case that data count is more then 4 */ |
| for (data_cnt = 0; data_cnt < data_size; data_cnt += 4) { |
| /* |
| * after sending 4bytes per one time, |
| * send remainder data less then 4. |
| */ |
| if ((data_size - data_cnt) < 4) { |
| if ((data_size - data_cnt) == 3) { |
| payload = data0[data_cnt] | |
| data0[data_cnt + 1] << 8 | |
| data0[data_cnt + 2] << 16; |
| dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n", |
| payload, data0[data_cnt], |
| data0[data_cnt + 1], |
| data0[data_cnt + 2]); |
| } else if ((data_size - data_cnt) == 2) { |
| payload = data0[data_cnt] | |
| data0[data_cnt + 1] << 8; |
| dev_dbg(dsim->dev, |
| "count = 2 payload = %x, %x %x\n", payload, |
| data0[data_cnt], |
| data0[data_cnt + 1]); |
| } else if ((data_size - data_cnt) == 1) { |
| payload = data0[data_cnt]; |
| } |
| |
| exynos_mipi_dsi_wr_tx_data(dsim, payload); |
| /* send 4bytes per one time. */ |
| } else { |
| payload = data0[data_cnt] | |
| data0[data_cnt + 1] << 8 | |
| data0[data_cnt + 2] << 16 | |
| data0[data_cnt + 3] << 24; |
| |
| dev_dbg(dsim->dev, |
| "count = 4 payload = %x, %x %x %x %x\n", |
| payload, *(u8 *)(data0 + data_cnt), |
| data0[data_cnt + 1], |
| data0[data_cnt + 2], |
| data0[data_cnt + 3]); |
| |
| exynos_mipi_dsi_wr_tx_data(dsim, payload); |
| } |
| } |
| } |
| |
| int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, |
| const unsigned char *data0, unsigned int data_size) |
| { |
| unsigned int check_rx_ack = 0; |
| |
| if (dsim->state == DSIM_STATE_ULPS) { |
| dev_err(dsim->dev, "state is ULPS.\n"); |
| |
| return -EINVAL; |
| } |
| |
| /* FIXME!!! why does it need this delay? */ |
| msleep(20); |
| |
| mutex_lock(&dsim->lock); |
| |
| switch (data_id) { |
| /* short packet types of packet types for command. */ |
| case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM: |
| case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM: |
| case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM: |
| case MIPI_DSI_DCS_SHORT_WRITE: |
| case MIPI_DSI_DCS_SHORT_WRITE_PARAM: |
| case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: |
| exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); |
| if (check_rx_ack) { |
| /* process response func should be implemented */ |
| mutex_unlock(&dsim->lock); |
| return 0; |
| } else { |
| mutex_unlock(&dsim->lock); |
| return -EINVAL; |
| } |
| |
| /* general command */ |
| case MIPI_DSI_COLOR_MODE_OFF: |
| case MIPI_DSI_COLOR_MODE_ON: |
| case MIPI_DSI_SHUTDOWN_PERIPHERAL: |
| case MIPI_DSI_TURN_ON_PERIPHERAL: |
| exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); |
| if (check_rx_ack) { |
| /* process response func should be implemented. */ |
| mutex_unlock(&dsim->lock); |
| return 0; |
| } else { |
| mutex_unlock(&dsim->lock); |
| return -EINVAL; |
| } |
| |
| /* packet types for video data */ |
| case MIPI_DSI_V_SYNC_START: |
| case MIPI_DSI_V_SYNC_END: |
| case MIPI_DSI_H_SYNC_START: |
| case MIPI_DSI_H_SYNC_END: |
| case MIPI_DSI_END_OF_TRANSMISSION: |
| mutex_unlock(&dsim->lock); |
| return 0; |
| |
| /* long packet type and null packet */ |
| case MIPI_DSI_NULL_PACKET: |
| case MIPI_DSI_BLANKING_PACKET: |
| mutex_unlock(&dsim->lock); |
| return 0; |
| case MIPI_DSI_GENERIC_LONG_WRITE: |
| case MIPI_DSI_DCS_LONG_WRITE: |
| { |
| unsigned int size, payload = 0; |
| INIT_COMPLETION(dsim_wr_comp); |
| |
| size = data_size * 4; |
| |
| /* if data count is less then 4, then send 3bytes data. */ |
| if (data_size < 4) { |
| payload = data0[0] | |
| data0[1] << 8 | |
| data0[2] << 16; |
| |
| exynos_mipi_dsi_wr_tx_data(dsim, payload); |
| |
| dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n", |
| data_size, payload, data0[0], |
| data0[1], data0[2]); |
| |
| /* in case that data count is more then 4 */ |
| } else |
| exynos_mipi_dsi_long_data_wr(dsim, data0, data_size); |
| |
| /* put data into header fifo */ |
| exynos_mipi_dsi_wr_tx_header(dsim, data_id, data_size & 0xff, |
| (data_size & 0xff00) >> 8); |
| |
| if (!wait_for_completion_interruptible_timeout(&dsim_wr_comp, |
| MIPI_FIFO_TIMEOUT)) { |
| dev_warn(dsim->dev, "command write timeout.\n"); |
| mutex_unlock(&dsim->lock); |
| return -EAGAIN; |
| } |
| |
| if (check_rx_ack) { |
| /* process response func should be implemented. */ |
| mutex_unlock(&dsim->lock); |
| return 0; |
| } else { |
| mutex_unlock(&dsim->lock); |
| return -EINVAL; |
| } |
| } |
| |
| /* packet typo for video data */ |
| case MIPI_DSI_PACKED_PIXEL_STREAM_16: |
| case MIPI_DSI_PACKED_PIXEL_STREAM_18: |
| case MIPI_DSI_PIXEL_STREAM_3BYTE_18: |
| case MIPI_DSI_PACKED_PIXEL_STREAM_24: |
| if (check_rx_ack) { |
| /* process response func should be implemented. */ |
| mutex_unlock(&dsim->lock); |
| return 0; |
| } else { |
| mutex_unlock(&dsim->lock); |
| return -EINVAL; |
| } |
| default: |
| dev_warn(dsim->dev, |
| "data id %x is not supported current DSI spec.\n", |
| data_id); |
| |
| mutex_unlock(&dsim->lock); |
| return -EINVAL; |
| } |
| } |
| |
| static unsigned int exynos_mipi_dsi_long_data_rd(struct mipi_dsim_device *dsim, |
| unsigned int req_size, unsigned int rx_data, u8 *rx_buf) |
| { |
| unsigned int rcv_pkt, i, j; |
| u16 rxsize; |
| |
| /* for long packet */ |
| rxsize = (u16)((rx_data & 0x00ffff00) >> 8); |
| dev_dbg(dsim->dev, "mipi dsi rx size : %d\n", rxsize); |
| if (rxsize != req_size) { |
| dev_dbg(dsim->dev, |
| "received size mismatch received: %d, requested: %d\n", |
| rxsize, req_size); |
| goto err; |
| } |
| |
| for (i = 0; i < (rxsize >> 2); i++) { |
| rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); |
| dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt); |
| for (j = 0; j < 4; j++) { |
| rx_buf[(i * 4) + j] = |
| (u8)(rcv_pkt >> (j * 8)) & 0xff; |
| dev_dbg(dsim->dev, "received value : %02x\n", |
| (rcv_pkt >> (j * 8)) & 0xff); |
| } |
| } |
| if (rxsize % 4) { |
| rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); |
| dev_dbg(dsim->dev, "received pkt : %08x\n", rcv_pkt); |
| for (j = 0; j < (rxsize % 4); j++) { |
| rx_buf[(i * 4) + j] = |
| (u8)(rcv_pkt >> (j * 8)) & 0xff; |
| dev_dbg(dsim->dev, "received value : %02x\n", |
| (rcv_pkt >> (j * 8)) & 0xff); |
| } |
| } |
| |
| return rxsize; |
| |
| err: |
| return -EINVAL; |
| } |
| |
| static unsigned int exynos_mipi_dsi_response_size(unsigned int req_size) |
| { |
| switch (req_size) { |
| case 1: |
| return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE; |
| case 2: |
| return MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE; |
| default: |
| return MIPI_DSI_RX_GENERIC_LONG_READ_RESPONSE; |
| } |
| } |
| |
| int exynos_mipi_dsi_rd_data(struct mipi_dsim_device *dsim, unsigned int data_id, |
| unsigned int data0, unsigned int req_size, u8 *rx_buf) |
| { |
| unsigned int rx_data, rcv_pkt, i; |
| u8 response = 0; |
| u16 rxsize; |
| |
| if (dsim->state == DSIM_STATE_ULPS) { |
| dev_err(dsim->dev, "state is ULPS.\n"); |
| |
| return -EINVAL; |
| } |
| |
| /* FIXME!!! */ |
| msleep(20); |
| |
| mutex_lock(&dsim->lock); |
| INIT_COMPLETION(dsim_rd_comp); |
| exynos_mipi_dsi_rd_tx_header(dsim, |
| MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE, req_size); |
| |
| response = exynos_mipi_dsi_response_size(req_size); |
| |
| switch (data_id) { |
| case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM: |
| case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM: |
| case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: |
| case MIPI_DSI_DCS_READ: |
| exynos_mipi_dsi_rd_tx_header(dsim, |
| data_id, data0); |
| /* process response func should be implemented. */ |
| break; |
| default: |
| dev_warn(dsim->dev, |
| "data id %x is not supported current DSI spec.\n", |
| data_id); |
| |
| return -EINVAL; |
| } |
| |
| if (!wait_for_completion_interruptible_timeout(&dsim_rd_comp, |
| MIPI_FIFO_TIMEOUT)) { |
| pr_err("RX done interrupt timeout\n"); |
| mutex_unlock(&dsim->lock); |
| return 0; |
| } |
| |
| msleep(20); |
| |
| rx_data = exynos_mipi_dsi_rd_rx_fifo(dsim); |
| |
| if ((u8)(rx_data & 0xff) != response) { |
| printk(KERN_ERR |
| "mipi dsi wrong response rx_data : %x, response:%x\n", |
| rx_data, response); |
| goto clear_rx_fifo; |
| } |
| |
| if (req_size <= 2) { |
| /* for short packet */ |
| for (i = 0; i < req_size; i++) |
| rx_buf[i] = (rx_data >> (8 + (i * 8))) & 0xff; |
| rxsize = req_size; |
| } else { |
| /* for long packet */ |
| rxsize = exynos_mipi_dsi_long_data_rd(dsim, req_size, rx_data, |
| rx_buf); |
| if (rxsize != req_size) |
| goto clear_rx_fifo; |
| } |
| |
| rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); |
| |
| msleep(20); |
| |
| if (rcv_pkt != MIPI_RX_FIFO_READ_DONE) { |
| dev_info(dsim->dev, |
| "Can't found RX FIFO READ DONE FLAG : %x\n", rcv_pkt); |
| goto clear_rx_fifo; |
| } |
| |
| mutex_unlock(&dsim->lock); |
| |
| return rxsize; |
| |
| clear_rx_fifo: |
| i = 0; |
| while (1) { |
| rcv_pkt = exynos_mipi_dsi_rd_rx_fifo(dsim); |
| if ((rcv_pkt == MIPI_RX_FIFO_READ_DONE) |
| || (i > MIPI_MAX_RX_FIFO)) |
| break; |
| dev_dbg(dsim->dev, |
| "mipi dsi clear rx fifo : %08x\n", rcv_pkt); |
| i++; |
| } |
| dev_info(dsim->dev, |
| "mipi dsi rx done count : %d, rcv_pkt : %08x\n", i, rcv_pkt); |
| |
| mutex_unlock(&dsim->lock); |
| |
| return 0; |
| } |
| |
| static int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, |
| unsigned int enable) |
| { |
| int sw_timeout; |
| |
| if (enable) { |
| sw_timeout = 1000; |
| |
| exynos_mipi_dsi_enable_pll(dsim, 1); |
| while (1) { |
| sw_timeout--; |
| if (exynos_mipi_dsi_is_pll_stable(dsim)) |
| return 0; |
| if (sw_timeout == 0) |
| return -EINVAL; |
| } |
| } else |
| exynos_mipi_dsi_enable_pll(dsim, 0); |
| |
| return 0; |
| } |
| |
| static unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, |
| unsigned int pre_divider, unsigned int main_divider, |
| unsigned int scaler) |
| { |
| unsigned long dfin_pll, dfvco, dpll_out; |
| unsigned int i, freq_band = 0xf; |
| |
| dfin_pll = (FIN_HZ / pre_divider); |
| |
| /****************************************************** |
| * Serial Clock(=ByteClk X 8) FreqBand[3:0] * |
| ****************************************************** |
| * ~ 99.99 MHz 0000 |
| * 100 ~ 119.99 MHz 0001 |
| * 120 ~ 159.99 MHz 0010 |
| * 160 ~ 199.99 MHz 0011 |
| * 200 ~ 239.99 MHz 0100 |
| * 140 ~ 319.99 MHz 0101 |
| * 320 ~ 389.99 MHz 0110 |
| * 390 ~ 449.99 MHz 0111 |
| * 450 ~ 509.99 MHz 1000 |
| * 510 ~ 559.99 MHz 1001 |
| * 560 ~ 639.99 MHz 1010 |
| * 640 ~ 689.99 MHz 1011 |
| * 690 ~ 769.99 MHz 1100 |
| * 770 ~ 869.99 MHz 1101 |
| * 870 ~ 949.99 MHz 1110 |
| * 950 ~ 1000 MHz 1111 |
| ******************************************************/ |
| if (dfin_pll < DFIN_PLL_MIN_HZ || dfin_pll > DFIN_PLL_MAX_HZ) { |
| dev_warn(dsim->dev, "fin_pll range should be 6MHz ~ 12MHz\n"); |
| exynos_mipi_dsi_enable_afc(dsim, 0, 0); |
| } else { |
| if (dfin_pll < 7 * MHZ) |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x1); |
| else if (dfin_pll < 8 * MHZ) |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x0); |
| else if (dfin_pll < 9 * MHZ) |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x3); |
| else if (dfin_pll < 10 * MHZ) |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x2); |
| else if (dfin_pll < 11 * MHZ) |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x5); |
| else |
| exynos_mipi_dsi_enable_afc(dsim, 1, 0x4); |
| } |
| |
| dfvco = dfin_pll * main_divider; |
| dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n", |
| dfvco, dfin_pll, main_divider); |
| if (dfvco < DFVCO_MIN_HZ || dfvco > DFVCO_MAX_HZ) |
| dev_warn(dsim->dev, "fvco range should be 500MHz ~ 1000MHz\n"); |
| |
| dpll_out = dfvco / (1 << scaler); |
| dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n", |
| dpll_out, dfvco, scaler); |
| |
| for (i = 0; i < ARRAY_SIZE(dpll_table); i++) { |
| if (dpll_out < dpll_table[i] * MHZ) { |
| freq_band = i; |
| break; |
| } |
| } |
| |
| dev_dbg(dsim->dev, "freq_band = %d\n", freq_band); |
| |
| exynos_mipi_dsi_pll_freq(dsim, pre_divider, main_divider, scaler); |
| |
| exynos_mipi_dsi_hs_zero_ctrl(dsim, 0); |
| exynos_mipi_dsi_prep_ctrl(dsim, 0); |
| |
| /* Freq Band */ |
| exynos_mipi_dsi_pll_freq_band(dsim, freq_band); |
| |
| /* Stable time */ |
| exynos_mipi_dsi_pll_stable_time(dsim, dsim->dsim_config->pll_stable_time); |
| |
| /* Enable PLL */ |
| dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n", |
| (dpll_out / MHZ)); |
| |
| return dpll_out; |
| } |
| |
| static int exynos_mipi_dsi_set_clock(struct mipi_dsim_device *dsim, |
| unsigned int byte_clk_sel, unsigned int enable) |
| { |
| unsigned int esc_div; |
| unsigned long esc_clk_error_rate; |
| unsigned long hs_clk = 0, byte_clk = 0, escape_clk = 0; |
| |
| if (enable) { |
| dsim->e_clk_src = byte_clk_sel; |
| |
| /* Escape mode clock and byte clock source */ |
| exynos_mipi_dsi_set_byte_clock_src(dsim, byte_clk_sel); |
| |
| /* DPHY, DSIM Link : D-PHY clock out */ |
| if (byte_clk_sel == DSIM_PLL_OUT_DIV8) { |
| hs_clk = exynos_mipi_dsi_change_pll(dsim, |
| dsim->dsim_config->p, dsim->dsim_config->m, |
| dsim->dsim_config->s); |
| if (hs_clk == 0) { |
| dev_err(dsim->dev, |
| "failed to get hs clock.\n"); |
| return -EINVAL; |
| } |
| |
| byte_clk = hs_clk / 8; |
| exynos_mipi_dsi_enable_pll_bypass(dsim, 0); |
| exynos_mipi_dsi_pll_on(dsim, 1); |
| /* DPHY : D-PHY clock out, DSIM link : external clock out */ |
| } else if (byte_clk_sel == DSIM_EXT_CLK_DIV8) { |
| dev_warn(dsim->dev, "this project is not support\n"); |
| dev_warn(dsim->dev, |
| "external clock source for MIPI DSIM.\n"); |
| } else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS) { |
| dev_warn(dsim->dev, "this project is not support\n"); |
| dev_warn(dsim->dev, |
| "external clock source for MIPI DSIM\n"); |
| } |
| |
| /* escape clock divider */ |
| esc_div = byte_clk / (dsim->dsim_config->esc_clk); |
| dev_dbg(dsim->dev, |
| "esc_div = %d, byte_clk = %lu, esc_clk = %lu\n", |
| esc_div, byte_clk, dsim->dsim_config->esc_clk); |
| if ((byte_clk / esc_div) >= (20 * MHZ) || |
| (byte_clk / esc_div) > |
| dsim->dsim_config->esc_clk) |
| esc_div += 1; |
| |
| escape_clk = byte_clk / esc_div; |
| dev_dbg(dsim->dev, |
| "escape_clk = %lu, byte_clk = %lu, esc_div = %d\n", |
| escape_clk, byte_clk, esc_div); |
| |
| /* enable escape clock. */ |
| exynos_mipi_dsi_enable_byte_clock(dsim, 1); |
| |
| /* enable byte clk and escape clock */ |
| exynos_mipi_dsi_set_esc_clk_prs(dsim, 1, esc_div); |
| /* escape clock on lane */ |
| exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, |
| (DSIM_LANE_CLOCK | dsim->data_lane), 1); |
| |
| dev_dbg(dsim->dev, "byte clock is %luMHz\n", |
| (byte_clk / MHZ)); |
| dev_dbg(dsim->dev, "escape clock that user's need is %lu\n", |
| (dsim->dsim_config->esc_clk / MHZ)); |
| dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div); |
| dev_dbg(dsim->dev, "escape clock is %luMHz\n", |
| ((byte_clk / esc_div) / MHZ)); |
| |
| if ((byte_clk / esc_div) > escape_clk) { |
| esc_clk_error_rate = escape_clk / |
| (byte_clk / esc_div); |
| dev_warn(dsim->dev, "error rate is %lu over.\n", |
| (esc_clk_error_rate / 100)); |
| } else if ((byte_clk / esc_div) < (escape_clk)) { |
| esc_clk_error_rate = (byte_clk / esc_div) / |
| escape_clk; |
| dev_warn(dsim->dev, "error rate is %lu under.\n", |
| (esc_clk_error_rate / 100)); |
| } |
| } else { |
| exynos_mipi_dsi_enable_esc_clk_on_lane(dsim, |
| (DSIM_LANE_CLOCK | dsim->data_lane), 0); |
| exynos_mipi_dsi_set_esc_clk_prs(dsim, 0, 0); |
| |
| /* disable escape clock. */ |
| exynos_mipi_dsi_enable_byte_clock(dsim, 0); |
| |
| if (byte_clk_sel == DSIM_PLL_OUT_DIV8) |
| exynos_mipi_dsi_pll_on(dsim, 0); |
| } |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_init_dsim(struct mipi_dsim_device *dsim) |
| { |
| dsim->state = DSIM_STATE_INIT; |
| |
| switch (dsim->dsim_config->e_no_data_lane) { |
| case DSIM_DATA_LANE_1: |
| dsim->data_lane = DSIM_LANE_DATA0; |
| break; |
| case DSIM_DATA_LANE_2: |
| dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1; |
| break; |
| case DSIM_DATA_LANE_3: |
| dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | |
| DSIM_LANE_DATA2; |
| break; |
| case DSIM_DATA_LANE_4: |
| dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 | |
| DSIM_LANE_DATA2 | DSIM_LANE_DATA3; |
| break; |
| default: |
| dev_info(dsim->dev, "data lane is invalid.\n"); |
| return -EINVAL; |
| }; |
| |
| exynos_mipi_dsi_sw_reset(dsim); |
| exynos_mipi_dsi_func_reset(dsim); |
| |
| exynos_mipi_dsi_dp_dn_swap(dsim, 0); |
| |
| return 0; |
| } |
| |
| void exynos_mipi_dsi_init_interrupt(struct mipi_dsim_device *dsim) |
| { |
| unsigned int src = 0; |
| |
| src = (INTSRC_SFR_FIFO_EMPTY | INTSRC_RX_DATA_DONE); |
| exynos_mipi_dsi_set_interrupt(dsim, src, 1); |
| |
| src = 0; |
| src = ~(INTMSK_RX_DONE | INTMSK_FIFO_EMPTY); |
| exynos_mipi_dsi_set_interrupt_mask(dsim, src, 1); |
| } |
| |
| int exynos_mipi_dsi_enable_frame_done_int(struct mipi_dsim_device *dsim, |
| unsigned int enable) |
| { |
| /* enable only frame done interrupt */ |
| exynos_mipi_dsi_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable); |
| |
| return 0; |
| } |
| |
| void exynos_mipi_dsi_stand_by(struct mipi_dsim_device *dsim, |
| unsigned int enable) |
| { |
| |
| /* consider Main display and Sub display. */ |
| |
| exynos_mipi_dsi_set_main_stand_by(dsim, enable); |
| } |
| |
| int exynos_mipi_dsi_set_display_mode(struct mipi_dsim_device *dsim, |
| struct mipi_dsim_config *dsim_config) |
| { |
| struct mipi_dsim_platform_data *dsim_pd; |
| struct fb_videomode *timing; |
| |
| dsim_pd = (struct mipi_dsim_platform_data *)dsim->pd; |
| timing = (struct fb_videomode *)dsim_pd->lcd_panel_info; |
| |
| /* in case of VIDEO MODE (RGB INTERFACE), it sets polarities. */ |
| if (dsim_config->e_interface == (u32) DSIM_VIDEO) { |
| if (dsim_config->auto_vertical_cnt == 0) { |
| exynos_mipi_dsi_set_main_disp_vporch(dsim, |
| dsim_config->cmd_allow, |
| timing->lower_margin, |
| timing->upper_margin); |
| exynos_mipi_dsi_set_main_disp_hporch(dsim, |
| timing->right_margin, |
| timing->left_margin); |
| exynos_mipi_dsi_set_main_disp_sync_area(dsim, |
| timing->vsync_len, |
| timing->hsync_len); |
| } |
| } |
| |
| exynos_mipi_dsi_set_main_disp_resol(dsim, timing->xres, |
| timing->yres); |
| |
| exynos_mipi_dsi_display_config(dsim, dsim_config); |
| |
| dev_info(dsim->dev, "lcd panel ==> width = %d, height = %d\n", |
| timing->xres, timing->yres); |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_init_link(struct mipi_dsim_device *dsim) |
| { |
| unsigned int time_out = 100; |
| |
| switch (dsim->state) { |
| case DSIM_STATE_INIT: |
| exynos_mipi_dsi_init_fifo_pointer(dsim, 0x1f); |
| |
| /* dsi configuration */ |
| exynos_mipi_dsi_init_config(dsim); |
| exynos_mipi_dsi_enable_lane(dsim, DSIM_LANE_CLOCK, 1); |
| exynos_mipi_dsi_enable_lane(dsim, dsim->data_lane, 1); |
| |
| /* set clock configuration */ |
| exynos_mipi_dsi_set_clock(dsim, dsim->dsim_config->e_byte_clk, 1); |
| |
| /* check clock and data lane state are stop state */ |
| while (!(exynos_mipi_dsi_is_lane_state(dsim))) { |
| time_out--; |
| if (time_out == 0) { |
| dev_err(dsim->dev, |
| "DSI Master is not stop state.\n"); |
| dev_err(dsim->dev, |
| "Check initialization process\n"); |
| |
| return -EINVAL; |
| } |
| } |
| if (time_out != 0) { |
| dev_info(dsim->dev, |
| "DSI Master driver has been completed.\n"); |
| dev_info(dsim->dev, "DSI Master state is stop state\n"); |
| } |
| |
| dsim->state = DSIM_STATE_STOP; |
| |
| /* BTA sequence counters */ |
| exynos_mipi_dsi_set_stop_state_counter(dsim, |
| dsim->dsim_config->stop_holding_cnt); |
| exynos_mipi_dsi_set_bta_timeout(dsim, |
| dsim->dsim_config->bta_timeout); |
| exynos_mipi_dsi_set_lpdr_timeout(dsim, |
| dsim->dsim_config->rx_timeout); |
| |
| return 0; |
| default: |
| dev_info(dsim->dev, "DSI Master is already init.\n"); |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_set_hs_enable(struct mipi_dsim_device *dsim) |
| { |
| if (dsim->state != DSIM_STATE_STOP) { |
| dev_warn(dsim->dev, "DSIM is not in stop state.\n"); |
| return 0; |
| } |
| |
| if (dsim->e_clk_src == DSIM_EXT_CLK_BYPASS) { |
| dev_warn(dsim->dev, "clock source is external bypass.\n"); |
| return 0; |
| } |
| |
| dsim->state = DSIM_STATE_HSCLKEN; |
| |
| /* set LCDC and CPU transfer mode to HS. */ |
| exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); |
| exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); |
| exynos_mipi_dsi_enable_hs_clock(dsim, 1); |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_set_data_transfer_mode(struct mipi_dsim_device *dsim, |
| unsigned int mode) |
| { |
| if (mode) { |
| if (dsim->state != DSIM_STATE_HSCLKEN) { |
| dev_err(dsim->dev, "HS Clock lane is not enabled.\n"); |
| return -EINVAL; |
| } |
| |
| exynos_mipi_dsi_set_lcdc_transfer_mode(dsim, 0); |
| } else { |
| if (dsim->state == DSIM_STATE_INIT || dsim->state == |
| DSIM_STATE_ULPS) { |
| dev_err(dsim->dev, |
| "DSI Master is not STOP or HSDT state.\n"); |
| return -EINVAL; |
| } |
| |
| exynos_mipi_dsi_set_cpu_transfer_mode(dsim, 0); |
| } |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim) |
| { |
| return _exynos_mipi_dsi_get_frame_done_status(dsim); |
| } |
| |
| int exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim) |
| { |
| _exynos_mipi_dsi_clear_frame_done(dsim); |
| |
| return 0; |
| } |
| |
| int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim, |
| unsigned int val) |
| { |
| int try = TRY_FIFO_CLEAR; |
| |
| exynos_mipi_dsi_sw_reset_release(dsim); |
| exynos_mipi_dsi_func_reset(dsim); |
| |
| do { |
| if (exynos_mipi_dsi_get_sw_reset_release(dsim)) { |
| exynos_mipi_dsi_init_interrupt(dsim); |
| dev_dbg(dsim->dev, "reset release done.\n"); |
| return 0; |
| } |
| } while (--try); |
| |
| dev_err(dsim->dev, "failed to clear dsim fifo.\n"); |
| return -EAGAIN; |
| } |
| |
| MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>"); |
| MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver"); |
| MODULE_LICENSE("GPL"); |