| /* |
| * QNX6 file system, Linux implementation. |
| * |
| * Version : 1.0.0 |
| * |
| * History : |
| * |
| * 01-02-2012 by Kai Bankett (chaosman@ontika.net) : first release. |
| * |
| */ |
| |
| #include <linux/buffer_head.h> |
| #include <linux/slab.h> |
| #include <linux/crc32.h> |
| #include "qnx6.h" |
| |
| static void qnx6_mmi_copy_sb(struct qnx6_super_block *qsb, |
| struct qnx6_mmi_super_block *sb) |
| { |
| qsb->sb_magic = sb->sb_magic; |
| qsb->sb_checksum = sb->sb_checksum; |
| qsb->sb_serial = sb->sb_serial; |
| qsb->sb_blocksize = sb->sb_blocksize; |
| qsb->sb_num_inodes = sb->sb_num_inodes; |
| qsb->sb_free_inodes = sb->sb_free_inodes; |
| qsb->sb_num_blocks = sb->sb_num_blocks; |
| qsb->sb_free_blocks = sb->sb_free_blocks; |
| |
| /* the rest of the superblock is the same */ |
| memcpy(&qsb->Inode, &sb->Inode, sizeof(sb->Inode)); |
| memcpy(&qsb->Bitmap, &sb->Bitmap, sizeof(sb->Bitmap)); |
| memcpy(&qsb->Longfile, &sb->Longfile, sizeof(sb->Longfile)); |
| } |
| |
| struct qnx6_super_block *qnx6_mmi_fill_super(struct super_block *s, int silent) |
| { |
| struct buffer_head *bh1, *bh2 = NULL; |
| struct qnx6_mmi_super_block *sb1, *sb2; |
| struct qnx6_super_block *qsb = NULL; |
| struct qnx6_sb_info *sbi; |
| __u64 offset; |
| |
| /* Check the superblock signatures |
| start with the first superblock */ |
| bh1 = sb_bread(s, 0); |
| if (!bh1) { |
| printk(KERN_ERR "qnx6: Unable to read first mmi superblock\n"); |
| return NULL; |
| } |
| sb1 = (struct qnx6_mmi_super_block *)bh1->b_data; |
| sbi = QNX6_SB(s); |
| if (fs32_to_cpu(sbi, sb1->sb_magic) != QNX6_SUPER_MAGIC) { |
| if (!silent) { |
| printk(KERN_ERR "qnx6: wrong signature (magic) in" |
| " superblock #1.\n"); |
| goto out; |
| } |
| } |
| |
| /* checksum check - start at byte 8 and end at byte 512 */ |
| if (fs32_to_cpu(sbi, sb1->sb_checksum) != |
| crc32_be(0, (char *)(bh1->b_data + 8), 504)) { |
| printk(KERN_ERR "qnx6: superblock #1 checksum error\n"); |
| goto out; |
| } |
| |
| /* calculate second superblock blocknumber */ |
| offset = fs32_to_cpu(sbi, sb1->sb_num_blocks) + QNX6_SUPERBLOCK_AREA / |
| fs32_to_cpu(sbi, sb1->sb_blocksize); |
| |
| /* set new blocksize */ |
| if (!sb_set_blocksize(s, fs32_to_cpu(sbi, sb1->sb_blocksize))) { |
| printk(KERN_ERR "qnx6: unable to set blocksize\n"); |
| goto out; |
| } |
| /* blocksize invalidates bh - pull it back in */ |
| brelse(bh1); |
| bh1 = sb_bread(s, 0); |
| if (!bh1) |
| goto out; |
| sb1 = (struct qnx6_mmi_super_block *)bh1->b_data; |
| |
| /* read second superblock */ |
| bh2 = sb_bread(s, offset); |
| if (!bh2) { |
| printk(KERN_ERR "qnx6: unable to read the second superblock\n"); |
| goto out; |
| } |
| sb2 = (struct qnx6_mmi_super_block *)bh2->b_data; |
| if (fs32_to_cpu(sbi, sb2->sb_magic) != QNX6_SUPER_MAGIC) { |
| if (!silent) |
| printk(KERN_ERR "qnx6: wrong signature (magic) in" |
| " superblock #2.\n"); |
| goto out; |
| } |
| |
| /* checksum check - start at byte 8 and end at byte 512 */ |
| if (fs32_to_cpu(sbi, sb2->sb_checksum) |
| != crc32_be(0, (char *)(bh2->b_data + 8), 504)) { |
| printk(KERN_ERR "qnx6: superblock #1 checksum error\n"); |
| goto out; |
| } |
| |
| qsb = kmalloc(sizeof(*qsb), GFP_KERNEL); |
| if (!qsb) { |
| printk(KERN_ERR "qnx6: unable to allocate memory.\n"); |
| goto out; |
| } |
| |
| if (fs64_to_cpu(sbi, sb1->sb_serial) > |
| fs64_to_cpu(sbi, sb2->sb_serial)) { |
| /* superblock #1 active */ |
| qnx6_mmi_copy_sb(qsb, sb1); |
| #ifdef CONFIG_QNX6FS_DEBUG |
| qnx6_superblock_debug(qsb, s); |
| #endif |
| memcpy(bh1->b_data, qsb, sizeof(struct qnx6_super_block)); |
| |
| sbi->sb_buf = bh1; |
| sbi->sb = (struct qnx6_super_block *)bh1->b_data; |
| brelse(bh2); |
| printk(KERN_INFO "qnx6: superblock #1 active\n"); |
| } else { |
| /* superblock #2 active */ |
| qnx6_mmi_copy_sb(qsb, sb2); |
| #ifdef CONFIG_QNX6FS_DEBUG |
| qnx6_superblock_debug(qsb, s); |
| #endif |
| memcpy(bh2->b_data, qsb, sizeof(struct qnx6_super_block)); |
| |
| sbi->sb_buf = bh2; |
| sbi->sb = (struct qnx6_super_block *)bh2->b_data; |
| brelse(bh1); |
| printk(KERN_INFO "qnx6: superblock #2 active\n"); |
| } |
| kfree(qsb); |
| |
| /* offset for mmi_fs is just SUPERBLOCK_AREA bytes */ |
| sbi->s_blks_off = QNX6_SUPERBLOCK_AREA / s->s_blocksize; |
| |
| /* success */ |
| return sbi->sb; |
| |
| out: |
| if (bh1 != NULL) |
| brelse(bh1); |
| if (bh2 != NULL) |
| brelse(bh2); |
| return NULL; |
| } |