| /* |
| * cdc-acm.c |
| * |
| * Copyright (c) 1999 Armin Fuerst <fuerst@in.tum.de> |
| * Copyright (c) 1999 Pavel Machek <pavel@suse.cz> |
| * Copyright (c) 1999 Johannes Erdfelt <johannes@erdfelt.com> |
| * Copyright (c) 2000 Vojtech Pavlik <vojtech@suse.cz> |
| * Copyright (c) 2004 Oliver Neukum <oliver@neukum.name> |
| * Copyright (c) 2005 David Kubicek <dave@awk.cz> |
| * |
| * USB Abstract Control Model driver for USB modems and ISDN adapters |
| * |
| * Sponsored by SuSE |
| * |
| * ChangeLog: |
| * v0.9 - thorough cleaning, URBification, almost a rewrite |
| * v0.10 - some more cleanups |
| * v0.11 - fixed flow control, read error doesn't stop reads |
| * v0.12 - added TIOCM ioctls, added break handling, made struct acm |
| * kmalloced |
| * v0.13 - added termios, added hangup |
| * v0.14 - sized down struct acm |
| * v0.15 - fixed flow control again - characters could be lost |
| * v0.16 - added code for modems with swapped data and control interfaces |
| * v0.17 - added new style probing |
| * v0.18 - fixed new style probing for devices with more configurations |
| * v0.19 - fixed CLOCAL handling (thanks to Richard Shih-Ping Chan) |
| * v0.20 - switched to probing on interface (rather than device) class |
| * v0.21 - revert to probing on device for devices with multiple configs |
| * v0.22 - probe only the control interface. if usbcore doesn't choose the |
| * config we want, sysadmin changes bConfigurationValue in sysfs. |
| * v0.23 - use softirq for rx processing, as needed by tty layer |
| * v0.24 - change probe method to evaluate CDC union descriptor |
| * v0.25 - downstream tasks paralelized to maximize throughput |
| * v0.26 - multiple write urbs, writesize increased |
| */ |
| |
| /* |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #undef DEBUG |
| #undef VERBOSE_DEBUG |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/tty.h> |
| #include <linux/serial.h> |
| #include <linux/tty_driver.h> |
| #include <linux/tty_flip.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/uaccess.h> |
| #include <linux/usb.h> |
| #include <linux/usb/cdc.h> |
| #include <asm/byteorder.h> |
| #include <asm/unaligned.h> |
| #include <linux/list.h> |
| |
| #include "cdc-acm.h" |
| |
| |
| #define ACM_CLOSE_TIMEOUT 15 /* seconds to let writes drain */ |
| |
| /* |
| * Version Information |
| */ |
| #define DRIVER_VERSION "v0.26" |
| #define DRIVER_AUTHOR "Armin Fuerst, Pavel Machek, Johannes Erdfelt, Vojtech Pavlik, David Kubicek" |
| #define DRIVER_DESC "USB Abstract Control Model driver for USB modems and ISDN adapters" |
| |
| static struct usb_driver acm_driver; |
| static struct tty_driver *acm_tty_driver; |
| static struct acm *acm_table[ACM_TTY_MINORS]; |
| |
| static DEFINE_MUTEX(open_mutex); |
| |
| #define ACM_READY(acm) (acm && acm->dev && acm->port.count) |
| |
| static const struct tty_port_operations acm_port_ops = { |
| }; |
| |
| #ifdef VERBOSE_DEBUG |
| #define verbose 1 |
| #else |
| #define verbose 0 |
| #endif |
| |
| /* |
| * Functions for ACM control messages. |
| */ |
| |
| static int acm_ctrl_msg(struct acm *acm, int request, int value, |
| void *buf, int len) |
| { |
| int retval = usb_control_msg(acm->dev, usb_sndctrlpipe(acm->dev, 0), |
| request, USB_RT_ACM, value, |
| acm->control->altsetting[0].desc.bInterfaceNumber, |
| buf, len, 5000); |
| dbg("acm_control_msg: rq: 0x%02x val: %#x len: %#x result: %d", |
| request, value, len, retval); |
| return retval < 0 ? retval : 0; |
| } |
| |
| /* devices aren't required to support these requests. |
| * the cdc acm descriptor tells whether they do... |
| */ |
| #define acm_set_control(acm, control) \ |
| acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0) |
| #define acm_set_line(acm, line) \ |
| acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line)) |
| #define acm_send_break(acm, ms) \ |
| acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0) |
| |
| /* |
| * Write buffer management. |
| * All of these assume proper locks taken by the caller. |
| */ |
| |
| static int acm_wb_alloc(struct acm *acm) |
| { |
| int i, wbn; |
| struct acm_wb *wb; |
| |
| wbn = 0; |
| i = 0; |
| for (;;) { |
| wb = &acm->wb[wbn]; |
| if (!wb->use) { |
| wb->use = 1; |
| return wbn; |
| } |
| wbn = (wbn + 1) % ACM_NW; |
| if (++i >= ACM_NW) |
| return -1; |
| } |
| } |
| |
| static int acm_wb_is_avail(struct acm *acm) |
| { |
| int i, n; |
| unsigned long flags; |
| |
| n = ACM_NW; |
| spin_lock_irqsave(&acm->write_lock, flags); |
| for (i = 0; i < ACM_NW; i++) |
| n -= acm->wb[i].use; |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| return n; |
| } |
| |
| /* |
| * Finish write. Caller must hold acm->write_lock |
| */ |
| static void acm_write_done(struct acm *acm, struct acm_wb *wb) |
| { |
| wb->use = 0; |
| acm->transmitting--; |
| } |
| |
| /* |
| * Poke write. |
| * |
| * the caller is responsible for locking |
| */ |
| |
| static int acm_start_wb(struct acm *acm, struct acm_wb *wb) |
| { |
| int rc; |
| |
| acm->transmitting++; |
| |
| wb->urb->transfer_buffer = wb->buf; |
| wb->urb->transfer_dma = wb->dmah; |
| wb->urb->transfer_buffer_length = wb->len; |
| wb->urb->dev = acm->dev; |
| |
| rc = usb_submit_urb(wb->urb, GFP_ATOMIC); |
| if (rc < 0) { |
| dbg("usb_submit_urb(write bulk) failed: %d", rc); |
| acm_write_done(acm, wb); |
| } |
| return rc; |
| } |
| |
| static int acm_write_start(struct acm *acm, int wbn) |
| { |
| unsigned long flags; |
| struct acm_wb *wb = &acm->wb[wbn]; |
| int rc; |
| |
| spin_lock_irqsave(&acm->write_lock, flags); |
| if (!acm->dev) { |
| wb->use = 0; |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| return -ENODEV; |
| } |
| |
| dbg("%s susp_count: %d", __func__, acm->susp_count); |
| if (acm->susp_count) { |
| acm->delayed_wb = wb; |
| schedule_work(&acm->waker); |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| return 0; /* A white lie */ |
| } |
| usb_mark_last_busy(acm->dev); |
| |
| rc = acm_start_wb(acm, wb); |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| |
| return rc; |
| |
| } |
| /* |
| * attributes exported through sysfs |
| */ |
| static ssize_t show_caps |
| (struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct acm *acm = usb_get_intfdata(intf); |
| |
| return sprintf(buf, "%d", acm->ctrl_caps); |
| } |
| static DEVICE_ATTR(bmCapabilities, S_IRUGO, show_caps, NULL); |
| |
| static ssize_t show_country_codes |
| (struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct acm *acm = usb_get_intfdata(intf); |
| |
| memcpy(buf, acm->country_codes, acm->country_code_size); |
| return acm->country_code_size; |
| } |
| |
| static DEVICE_ATTR(wCountryCodes, S_IRUGO, show_country_codes, NULL); |
| |
| static ssize_t show_country_rel_date |
| (struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct acm *acm = usb_get_intfdata(intf); |
| |
| return sprintf(buf, "%d", acm->country_rel_date); |
| } |
| |
| static DEVICE_ATTR(iCountryCodeRelDate, S_IRUGO, show_country_rel_date, NULL); |
| /* |
| * Interrupt handlers for various ACM device responses |
| */ |
| |
| /* control interface reports status changes with "interrupt" transfers */ |
| static void acm_ctrl_irq(struct urb *urb) |
| { |
| struct acm *acm = urb->context; |
| struct usb_cdc_notification *dr = urb->transfer_buffer; |
| struct tty_struct *tty; |
| unsigned char *data; |
| int newctrl; |
| int retval; |
| int status = urb->status; |
| |
| switch (status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| /* this urb is terminated, clean up */ |
| dbg("%s - urb shutting down with status: %d", __func__, status); |
| return; |
| default: |
| dbg("%s - nonzero urb status received: %d", __func__, status); |
| goto exit; |
| } |
| |
| if (!ACM_READY(acm)) |
| goto exit; |
| |
| data = (unsigned char *)(dr + 1); |
| switch (dr->bNotificationType) { |
| case USB_CDC_NOTIFY_NETWORK_CONNECTION: |
| dbg("%s network", dr->wValue ? |
| "connected to" : "disconnected from"); |
| break; |
| |
| case USB_CDC_NOTIFY_SERIAL_STATE: |
| tty = tty_port_tty_get(&acm->port); |
| newctrl = get_unaligned_le16(data); |
| |
| if (tty) { |
| if (!acm->clocal && |
| (acm->ctrlin & ~newctrl & ACM_CTRL_DCD)) { |
| dbg("calling hangup"); |
| tty_hangup(tty); |
| } |
| tty_kref_put(tty); |
| } |
| |
| acm->ctrlin = newctrl; |
| |
| dbg("input control lines: dcd%c dsr%c break%c ring%c framing%c parity%c overrun%c", |
| acm->ctrlin & ACM_CTRL_DCD ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_DSR ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_BRK ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_RI ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_FRAMING ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_PARITY ? '+' : '-', |
| acm->ctrlin & ACM_CTRL_OVERRUN ? '+' : '-'); |
| break; |
| |
| default: |
| dbg("unknown notification %d received: index %d len %d data0 %d data1 %d", |
| dr->bNotificationType, dr->wIndex, |
| dr->wLength, data[0], data[1]); |
| break; |
| } |
| exit: |
| usb_mark_last_busy(acm->dev); |
| retval = usb_submit_urb(urb, GFP_ATOMIC); |
| if (retval) |
| dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with " |
| "result %d", __func__, retval); |
| } |
| |
| /* data interface returns incoming bytes, or we got unthrottled */ |
| static void acm_read_bulk(struct urb *urb) |
| { |
| struct acm_rb *buf; |
| struct acm_ru *rcv = urb->context; |
| struct acm *acm = rcv->instance; |
| int status = urb->status; |
| |
| dbg("Entering acm_read_bulk with status %d", status); |
| |
| if (!ACM_READY(acm)) { |
| dev_dbg(&acm->data->dev, "Aborting, acm not ready"); |
| return; |
| } |
| usb_mark_last_busy(acm->dev); |
| |
| if (status) |
| dev_dbg(&acm->data->dev, "bulk rx status %d\n", status); |
| |
| buf = rcv->buffer; |
| buf->size = urb->actual_length; |
| |
| if (likely(status == 0)) { |
| spin_lock(&acm->read_lock); |
| acm->processing++; |
| list_add_tail(&rcv->list, &acm->spare_read_urbs); |
| list_add_tail(&buf->list, &acm->filled_read_bufs); |
| spin_unlock(&acm->read_lock); |
| } else { |
| /* we drop the buffer due to an error */ |
| spin_lock(&acm->read_lock); |
| list_add_tail(&rcv->list, &acm->spare_read_urbs); |
| list_add(&buf->list, &acm->spare_read_bufs); |
| spin_unlock(&acm->read_lock); |
| /* nevertheless the tasklet must be kicked unconditionally |
| so the queue cannot dry up */ |
| } |
| if (likely(!acm->susp_count)) |
| tasklet_schedule(&acm->urb_task); |
| } |
| |
| static void acm_rx_tasklet(unsigned long _acm) |
| { |
| struct acm *acm = (void *)_acm; |
| struct acm_rb *buf; |
| struct tty_struct *tty; |
| struct acm_ru *rcv; |
| unsigned long flags; |
| unsigned char throttled; |
| |
| dbg("Entering acm_rx_tasklet"); |
| |
| if (!ACM_READY(acm)) { |
| dbg("acm_rx_tasklet: ACM not ready"); |
| return; |
| } |
| |
| spin_lock_irqsave(&acm->throttle_lock, flags); |
| throttled = acm->throttle; |
| spin_unlock_irqrestore(&acm->throttle_lock, flags); |
| if (throttled) { |
| dbg("acm_rx_tasklet: throttled"); |
| return; |
| } |
| |
| tty = tty_port_tty_get(&acm->port); |
| |
| next_buffer: |
| spin_lock_irqsave(&acm->read_lock, flags); |
| if (list_empty(&acm->filled_read_bufs)) { |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| goto urbs; |
| } |
| buf = list_entry(acm->filled_read_bufs.next, |
| struct acm_rb, list); |
| list_del(&buf->list); |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| |
| dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size); |
| |
| if (tty) { |
| spin_lock_irqsave(&acm->throttle_lock, flags); |
| throttled = acm->throttle; |
| spin_unlock_irqrestore(&acm->throttle_lock, flags); |
| if (!throttled) { |
| tty_buffer_request_room(tty, buf->size); |
| tty_insert_flip_string(tty, buf->base, buf->size); |
| tty_flip_buffer_push(tty); |
| } else { |
| tty_kref_put(tty); |
| dbg("Throttling noticed"); |
| spin_lock_irqsave(&acm->read_lock, flags); |
| list_add(&buf->list, &acm->filled_read_bufs); |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| return; |
| } |
| } |
| |
| spin_lock_irqsave(&acm->read_lock, flags); |
| list_add(&buf->list, &acm->spare_read_bufs); |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| goto next_buffer; |
| |
| urbs: |
| tty_kref_put(tty); |
| |
| while (!list_empty(&acm->spare_read_bufs)) { |
| spin_lock_irqsave(&acm->read_lock, flags); |
| if (list_empty(&acm->spare_read_urbs)) { |
| acm->processing = 0; |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| return; |
| } |
| rcv = list_entry(acm->spare_read_urbs.next, |
| struct acm_ru, list); |
| list_del(&rcv->list); |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| |
| buf = list_entry(acm->spare_read_bufs.next, |
| struct acm_rb, list); |
| list_del(&buf->list); |
| |
| rcv->buffer = buf; |
| |
| if (acm->is_int_ep) |
| usb_fill_int_urb(rcv->urb, acm->dev, |
| acm->rx_endpoint, |
| buf->base, |
| acm->readsize, |
| acm_read_bulk, rcv, acm->bInterval); |
| else |
| usb_fill_bulk_urb(rcv->urb, acm->dev, |
| acm->rx_endpoint, |
| buf->base, |
| acm->readsize, |
| acm_read_bulk, rcv); |
| rcv->urb->transfer_dma = buf->dma; |
| rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| |
| /* This shouldn't kill the driver as unsuccessful URBs are |
| returned to the free-urbs-pool and resubmited ASAP */ |
| spin_lock_irqsave(&acm->read_lock, flags); |
| if (acm->susp_count || |
| usb_submit_urb(rcv->urb, GFP_ATOMIC) < 0) { |
| list_add(&buf->list, &acm->spare_read_bufs); |
| list_add(&rcv->list, &acm->spare_read_urbs); |
| acm->processing = 0; |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| return; |
| } else { |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| dbg("acm_rx_tasklet: sending urb 0x%p, rcv 0x%p, buf 0x%p", rcv->urb, rcv, buf); |
| } |
| } |
| spin_lock_irqsave(&acm->read_lock, flags); |
| acm->processing = 0; |
| spin_unlock_irqrestore(&acm->read_lock, flags); |
| } |
| |
| /* data interface wrote those outgoing bytes */ |
| static void acm_write_bulk(struct urb *urb) |
| { |
| struct acm_wb *wb = urb->context; |
| struct acm *acm = wb->instance; |
| unsigned long flags; |
| |
| if (verbose || urb->status |
| || (urb->actual_length != urb->transfer_buffer_length)) |
| dev_dbg(&acm->data->dev, "tx %d/%d bytes -- > %d\n", |
| urb->actual_length, |
| urb->transfer_buffer_length, |
| urb->status); |
| |
| spin_lock_irqsave(&acm->write_lock, flags); |
| acm_write_done(acm, wb); |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| if (ACM_READY(acm)) |
| schedule_work(&acm->work); |
| else |
| wake_up_interruptible(&acm->drain_wait); |
| } |
| |
| static void acm_softint(struct work_struct *work) |
| { |
| struct acm *acm = container_of(work, struct acm, work); |
| struct tty_struct *tty; |
| |
| dev_vdbg(&acm->data->dev, "tx work\n"); |
| if (!ACM_READY(acm)) |
| return; |
| tty = tty_port_tty_get(&acm->port); |
| tty_wakeup(tty); |
| tty_kref_put(tty); |
| } |
| |
| static void acm_waker(struct work_struct *waker) |
| { |
| struct acm *acm = container_of(waker, struct acm, waker); |
| int rv; |
| |
| rv = usb_autopm_get_interface(acm->control); |
| if (rv < 0) { |
| dev_err(&acm->dev->dev, "Autopm failure in %s\n", __func__); |
| return; |
| } |
| if (acm->delayed_wb) { |
| acm_start_wb(acm, acm->delayed_wb); |
| acm->delayed_wb = NULL; |
| } |
| usb_autopm_put_interface(acm->control); |
| } |
| |
| /* |
| * TTY handlers |
| */ |
| |
| static int acm_tty_open(struct tty_struct *tty, struct file *filp) |
| { |
| struct acm *acm; |
| int rv = -ENODEV; |
| int i; |
| dbg("Entering acm_tty_open."); |
| |
| mutex_lock(&open_mutex); |
| |
| acm = acm_table[tty->index]; |
| if (!acm || !acm->dev) |
| goto err_out; |
| else |
| rv = 0; |
| |
| set_bit(TTY_NO_WRITE_SPLIT, &tty->flags); |
| |
| tty->driver_data = acm; |
| tty_port_tty_set(&acm->port, tty); |
| |
| if (usb_autopm_get_interface(acm->control) < 0) |
| goto early_bail; |
| else |
| acm->control->needs_remote_wakeup = 1; |
| |
| mutex_lock(&acm->mutex); |
| if (acm->port.count++) { |
| usb_autopm_put_interface(acm->control); |
| goto done; |
| } |
| |
| acm->ctrlurb->dev = acm->dev; |
| if (usb_submit_urb(acm->ctrlurb, GFP_KERNEL)) { |
| dbg("usb_submit_urb(ctrl irq) failed"); |
| goto bail_out; |
| } |
| |
| if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) && |
| (acm->ctrl_caps & USB_CDC_CAP_LINE)) |
| goto full_bailout; |
| |
| usb_autopm_put_interface(acm->control); |
| |
| INIT_LIST_HEAD(&acm->spare_read_urbs); |
| INIT_LIST_HEAD(&acm->spare_read_bufs); |
| INIT_LIST_HEAD(&acm->filled_read_bufs); |
| |
| for (i = 0; i < acm->rx_buflimit; i++) |
| list_add(&(acm->ru[i].list), &acm->spare_read_urbs); |
| for (i = 0; i < acm->rx_buflimit; i++) |
| list_add(&(acm->rb[i].list), &acm->spare_read_bufs); |
| |
| acm->throttle = 0; |
| |
| set_bit(ASYNCB_INITIALIZED, &acm->port.flags); |
| rv = tty_port_block_til_ready(&acm->port, tty, filp); |
| tasklet_schedule(&acm->urb_task); |
| done: |
| mutex_unlock(&acm->mutex); |
| err_out: |
| mutex_unlock(&open_mutex); |
| return rv; |
| |
| full_bailout: |
| usb_kill_urb(acm->ctrlurb); |
| bail_out: |
| usb_autopm_put_interface(acm->control); |
| acm->port.count--; |
| mutex_unlock(&acm->mutex); |
| early_bail: |
| mutex_unlock(&open_mutex); |
| tty_port_tty_set(&acm->port, NULL); |
| return -EIO; |
| } |
| |
| static void acm_tty_unregister(struct acm *acm) |
| { |
| int i, nr; |
| |
| nr = acm->rx_buflimit; |
| tty_unregister_device(acm_tty_driver, acm->minor); |
| usb_put_intf(acm->control); |
| acm_table[acm->minor] = NULL; |
| usb_free_urb(acm->ctrlurb); |
| for (i = 0; i < ACM_NW; i++) |
| usb_free_urb(acm->wb[i].urb); |
| for (i = 0; i < nr; i++) |
| usb_free_urb(acm->ru[i].urb); |
| kfree(acm->country_codes); |
| kfree(acm); |
| } |
| |
| static int acm_tty_chars_in_buffer(struct tty_struct *tty); |
| |
| static void acm_port_down(struct acm *acm, int drain) |
| { |
| int i, nr = acm->rx_buflimit; |
| mutex_lock(&open_mutex); |
| if (acm->dev) { |
| usb_autopm_get_interface(acm->control); |
| acm_set_control(acm, acm->ctrlout = 0); |
| /* try letting the last writes drain naturally */ |
| if (drain) { |
| wait_event_interruptible_timeout(acm->drain_wait, |
| (ACM_NW == acm_wb_is_avail(acm)) || !acm->dev, |
| ACM_CLOSE_TIMEOUT * HZ); |
| } |
| usb_kill_urb(acm->ctrlurb); |
| for (i = 0; i < ACM_NW; i++) |
| usb_kill_urb(acm->wb[i].urb); |
| for (i = 0; i < nr; i++) |
| usb_kill_urb(acm->ru[i].urb); |
| acm->control->needs_remote_wakeup = 0; |
| usb_autopm_put_interface(acm->control); |
| } |
| mutex_unlock(&open_mutex); |
| } |
| |
| static void acm_tty_hangup(struct tty_struct *tty) |
| { |
| struct acm *acm = tty->driver_data; |
| tty_port_hangup(&acm->port); |
| acm_port_down(acm, 0); |
| } |
| |
| static void acm_tty_close(struct tty_struct *tty, struct file *filp) |
| { |
| struct acm *acm = tty->driver_data; |
| |
| /* Perform the closing process and see if we need to do the hardware |
| shutdown */ |
| if (!acm) |
| return; |
| if (tty_port_close_start(&acm->port, tty, filp) == 0) { |
| mutex_lock(&open_mutex); |
| if (!acm->dev) { |
| tty_port_tty_set(&acm->port, NULL); |
| acm_tty_unregister(acm); |
| tty->driver_data = NULL; |
| } |
| mutex_unlock(&open_mutex); |
| return; |
| } |
| acm_port_down(acm, 0); |
| tty_port_close_end(&acm->port, tty); |
| tty_port_tty_set(&acm->port, NULL); |
| } |
| |
| static int acm_tty_write(struct tty_struct *tty, |
| const unsigned char *buf, int count) |
| { |
| struct acm *acm = tty->driver_data; |
| int stat; |
| unsigned long flags; |
| int wbn; |
| struct acm_wb *wb; |
| |
| dbg("Entering acm_tty_write to write %d bytes,", count); |
| |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| if (!count) |
| return 0; |
| |
| spin_lock_irqsave(&acm->write_lock, flags); |
| wbn = acm_wb_alloc(acm); |
| if (wbn < 0) { |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| return 0; |
| } |
| wb = &acm->wb[wbn]; |
| |
| count = (count > acm->writesize) ? acm->writesize : count; |
| dbg("Get %d bytes...", count); |
| memcpy(wb->buf, buf, count); |
| wb->len = count; |
| spin_unlock_irqrestore(&acm->write_lock, flags); |
| |
| stat = acm_write_start(acm, wbn); |
| if (stat < 0) |
| return stat; |
| return count; |
| } |
| |
| static int acm_tty_write_room(struct tty_struct *tty) |
| { |
| struct acm *acm = tty->driver_data; |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| /* |
| * Do not let the line discipline to know that we have a reserve, |
| * or it might get too enthusiastic. |
| */ |
| return acm_wb_is_avail(acm) ? acm->writesize : 0; |
| } |
| |
| static int acm_tty_chars_in_buffer(struct tty_struct *tty) |
| { |
| struct acm *acm = tty->driver_data; |
| if (!ACM_READY(acm)) |
| return 0; |
| /* |
| * This is inaccurate (overcounts), but it works. |
| */ |
| return (ACM_NW - acm_wb_is_avail(acm)) * acm->writesize; |
| } |
| |
| static void acm_tty_throttle(struct tty_struct *tty) |
| { |
| struct acm *acm = tty->driver_data; |
| if (!ACM_READY(acm)) |
| return; |
| spin_lock_bh(&acm->throttle_lock); |
| acm->throttle = 1; |
| spin_unlock_bh(&acm->throttle_lock); |
| } |
| |
| static void acm_tty_unthrottle(struct tty_struct *tty) |
| { |
| struct acm *acm = tty->driver_data; |
| if (!ACM_READY(acm)) |
| return; |
| spin_lock_bh(&acm->throttle_lock); |
| acm->throttle = 0; |
| spin_unlock_bh(&acm->throttle_lock); |
| tasklet_schedule(&acm->urb_task); |
| } |
| |
| static int acm_tty_break_ctl(struct tty_struct *tty, int state) |
| { |
| struct acm *acm = tty->driver_data; |
| int retval; |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| retval = acm_send_break(acm, state ? 0xffff : 0); |
| if (retval < 0) |
| dbg("send break failed"); |
| return retval; |
| } |
| |
| static int acm_tty_tiocmget(struct tty_struct *tty, struct file *file) |
| { |
| struct acm *acm = tty->driver_data; |
| |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| |
| return (acm->ctrlout & ACM_CTRL_DTR ? TIOCM_DTR : 0) | |
| (acm->ctrlout & ACM_CTRL_RTS ? TIOCM_RTS : 0) | |
| (acm->ctrlin & ACM_CTRL_DSR ? TIOCM_DSR : 0) | |
| (acm->ctrlin & ACM_CTRL_RI ? TIOCM_RI : 0) | |
| (acm->ctrlin & ACM_CTRL_DCD ? TIOCM_CD : 0) | |
| TIOCM_CTS; |
| } |
| |
| static int acm_tty_tiocmset(struct tty_struct *tty, struct file *file, |
| unsigned int set, unsigned int clear) |
| { |
| struct acm *acm = tty->driver_data; |
| unsigned int newctrl; |
| |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| |
| newctrl = acm->ctrlout; |
| set = (set & TIOCM_DTR ? ACM_CTRL_DTR : 0) | |
| (set & TIOCM_RTS ? ACM_CTRL_RTS : 0); |
| clear = (clear & TIOCM_DTR ? ACM_CTRL_DTR : 0) | |
| (clear & TIOCM_RTS ? ACM_CTRL_RTS : 0); |
| |
| newctrl = (newctrl & ~clear) | set; |
| |
| if (acm->ctrlout == newctrl) |
| return 0; |
| return acm_set_control(acm, acm->ctrlout = newctrl); |
| } |
| |
| static int acm_tty_ioctl(struct tty_struct *tty, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct acm *acm = tty->driver_data; |
| |
| if (!ACM_READY(acm)) |
| return -EINVAL; |
| |
| return -ENOIOCTLCMD; |
| } |
| |
| static const __u32 acm_tty_speed[] = { |
| 0, 50, 75, 110, 134, 150, 200, 300, 600, |
| 1200, 1800, 2400, 4800, 9600, 19200, 38400, |
| 57600, 115200, 230400, 460800, 500000, 576000, |
| 921600, 1000000, 1152000, 1500000, 2000000, |
| 2500000, 3000000, 3500000, 4000000 |
| }; |
| |
| static const __u8 acm_tty_size[] = { |
| 5, 6, 7, 8 |
| }; |
| |
| static void acm_tty_set_termios(struct tty_struct *tty, |
| struct ktermios *termios_old) |
| { |
| struct acm *acm = tty->driver_data; |
| struct ktermios *termios = tty->termios; |
| struct usb_cdc_line_coding newline; |
| int newctrl = acm->ctrlout; |
| |
| if (!ACM_READY(acm)) |
| return; |
| |
| newline.dwDTERate = cpu_to_le32(tty_get_baud_rate(tty)); |
| newline.bCharFormat = termios->c_cflag & CSTOPB ? 2 : 0; |
| newline.bParityType = termios->c_cflag & PARENB ? |
| (termios->c_cflag & PARODD ? 1 : 2) + |
| (termios->c_cflag & CMSPAR ? 2 : 0) : 0; |
| newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; |
| /* FIXME: Needs to clear unsupported bits in the termios */ |
| acm->clocal = ((termios->c_cflag & CLOCAL) != 0); |
| |
| if (!newline.dwDTERate) { |
| newline.dwDTERate = acm->line.dwDTERate; |
| newctrl &= ~ACM_CTRL_DTR; |
| } else |
| newctrl |= ACM_CTRL_DTR; |
| |
| if (newctrl != acm->ctrlout) |
| acm_set_control(acm, acm->ctrlout = newctrl); |
| |
| if (memcmp(&acm->line, &newline, sizeof newline)) { |
| memcpy(&acm->line, &newline, sizeof newline); |
| dbg("set line: %d %d %d %d", le32_to_cpu(newline.dwDTERate), |
| newline.bCharFormat, newline.bParityType, |
| newline.bDataBits); |
| acm_set_line(acm, &acm->line); |
| } |
| } |
| |
| /* |
| * USB probe and disconnect routines. |
| */ |
| |
| /* Little helpers: write/read buffers free */ |
| static void acm_write_buffers_free(struct acm *acm) |
| { |
| int i; |
| struct acm_wb *wb; |
| struct usb_device *usb_dev = interface_to_usbdev(acm->control); |
| |
| for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) |
| usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); |
| } |
| |
| static void acm_read_buffers_free(struct acm *acm) |
| { |
| struct usb_device *usb_dev = interface_to_usbdev(acm->control); |
| int i, n = acm->rx_buflimit; |
| |
| for (i = 0; i < n; i++) |
| usb_buffer_free(usb_dev, acm->readsize, |
| acm->rb[i].base, acm->rb[i].dma); |
| } |
| |
| /* Little helper: write buffers allocate */ |
| static int acm_write_buffers_alloc(struct acm *acm) |
| { |
| int i; |
| struct acm_wb *wb; |
| |
| for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { |
| wb->buf = usb_buffer_alloc(acm->dev, acm->writesize, GFP_KERNEL, |
| &wb->dmah); |
| if (!wb->buf) { |
| while (i != 0) { |
| --i; |
| --wb; |
| usb_buffer_free(acm->dev, acm->writesize, |
| wb->buf, wb->dmah); |
| } |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| static int acm_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_cdc_union_desc *union_header = NULL; |
| struct usb_cdc_country_functional_desc *cfd = NULL; |
| unsigned char *buffer = intf->altsetting->extra; |
| int buflen = intf->altsetting->extralen; |
| struct usb_interface *control_interface; |
| struct usb_interface *data_interface; |
| struct usb_endpoint_descriptor *epctrl = NULL; |
| struct usb_endpoint_descriptor *epread = NULL; |
| struct usb_endpoint_descriptor *epwrite = NULL; |
| struct usb_device *usb_dev = interface_to_usbdev(intf); |
| struct acm *acm; |
| int minor; |
| int ctrlsize, readsize; |
| u8 *buf; |
| u8 ac_management_function = 0; |
| u8 call_management_function = 0; |
| int call_interface_num = -1; |
| int data_interface_num; |
| unsigned long quirks; |
| int num_rx_buf; |
| int i; |
| int combined_interfaces = 0; |
| |
| /* normal quirks */ |
| quirks = (unsigned long)id->driver_info; |
| num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR; |
| |
| /* handle quirks deadly to normal probing*/ |
| if (quirks == NO_UNION_NORMAL) { |
| data_interface = usb_ifnum_to_if(usb_dev, 1); |
| control_interface = usb_ifnum_to_if(usb_dev, 0); |
| goto skip_normal_probe; |
| } |
| |
| /* normal probing*/ |
| if (!buffer) { |
| dev_err(&intf->dev, "Weird descriptor references\n"); |
| return -EINVAL; |
| } |
| |
| if (!buflen) { |
| if (intf->cur_altsetting->endpoint->extralen && |
| intf->cur_altsetting->endpoint->extra) { |
| dev_dbg(&intf->dev, |
| "Seeking extra descriptors on endpoint\n"); |
| buflen = intf->cur_altsetting->endpoint->extralen; |
| buffer = intf->cur_altsetting->endpoint->extra; |
| } else { |
| dev_err(&intf->dev, |
| "Zero length descriptor references\n"); |
| return -EINVAL; |
| } |
| } |
| |
| while (buflen > 0) { |
| if (buffer[1] != USB_DT_CS_INTERFACE) { |
| dev_err(&intf->dev, "skipping garbage\n"); |
| goto next_desc; |
| } |
| |
| switch (buffer[2]) { |
| case USB_CDC_UNION_TYPE: /* we've found it */ |
| if (union_header) { |
| dev_err(&intf->dev, "More than one " |
| "union descriptor, skipping ...\n"); |
| goto next_desc; |
| } |
| union_header = (struct usb_cdc_union_desc *)buffer; |
| break; |
| case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ |
| cfd = (struct usb_cdc_country_functional_desc *)buffer; |
| break; |
| case USB_CDC_HEADER_TYPE: /* maybe check version */ |
| break; /* for now we ignore it */ |
| case USB_CDC_ACM_TYPE: |
| ac_management_function = buffer[3]; |
| break; |
| case USB_CDC_CALL_MANAGEMENT_TYPE: |
| call_management_function = buffer[3]; |
| call_interface_num = buffer[4]; |
| if ((call_management_function & 3) != 3) |
| dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); |
| break; |
| default: |
| /* there are LOTS more CDC descriptors that |
| * could legitimately be found here. |
| */ |
| dev_dbg(&intf->dev, "Ignoring descriptor: " |
| "type %02x, length %d\n", |
| buffer[2], buffer[0]); |
| break; |
| } |
| next_desc: |
| buflen -= buffer[0]; |
| buffer += buffer[0]; |
| } |
| |
| if (!union_header) { |
| if (call_interface_num > 0) { |
| dev_dbg(&intf->dev, "No union descriptor, using call management descriptor\n"); |
| data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = call_interface_num)); |
| control_interface = intf; |
| } else { |
| if (intf->cur_altsetting->desc.bNumEndpoints != 3) { |
| dev_dbg(&intf->dev,"No union descriptor, giving up\n"); |
| return -ENODEV; |
| } else { |
| dev_warn(&intf->dev,"No union descriptor, testing for castrated device\n"); |
| combined_interfaces = 1; |
| control_interface = data_interface = intf; |
| goto look_for_collapsed_interface; |
| } |
| } |
| } else { |
| control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); |
| data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); |
| if (!control_interface || !data_interface) { |
| dev_dbg(&intf->dev, "no interfaces\n"); |
| return -ENODEV; |
| } |
| } |
| |
| if (data_interface_num != call_interface_num) |
| dev_dbg(&intf->dev, "Separate call control interface. That is not fully supported.\n"); |
| |
| if (control_interface == data_interface) { |
| /* some broken devices designed for windows work this way */ |
| dev_warn(&intf->dev,"Control and data interfaces are not separated!\n"); |
| combined_interfaces = 1; |
| /* a popular other OS doesn't use it */ |
| quirks |= NO_CAP_LINE; |
| if (data_interface->cur_altsetting->desc.bNumEndpoints != 3) { |
| dev_err(&intf->dev, "This needs exactly 3 endpoints\n"); |
| return -EINVAL; |
| } |
| look_for_collapsed_interface: |
| for (i = 0; i < 3; i++) { |
| struct usb_endpoint_descriptor *ep; |
| ep = &data_interface->cur_altsetting->endpoint[i].desc; |
| |
| if (usb_endpoint_is_int_in(ep)) |
| epctrl = ep; |
| else if (usb_endpoint_is_bulk_out(ep)) |
| epwrite = ep; |
| else if (usb_endpoint_is_bulk_in(ep)) |
| epread = ep; |
| else |
| return -EINVAL; |
| } |
| if (!epctrl || !epread || !epwrite) |
| return -ENODEV; |
| else |
| goto made_compressed_probe; |
| } |
| |
| skip_normal_probe: |
| |
| /*workaround for switched interfaces */ |
| if (data_interface->cur_altsetting->desc.bInterfaceClass |
| != CDC_DATA_INTERFACE_TYPE) { |
| if (control_interface->cur_altsetting->desc.bInterfaceClass |
| == CDC_DATA_INTERFACE_TYPE) { |
| struct usb_interface *t; |
| dev_dbg(&intf->dev, |
| "Your device has switched interfaces.\n"); |
| t = control_interface; |
| control_interface = data_interface; |
| data_interface = t; |
| } else { |
| return -EINVAL; |
| } |
| } |
| |
| /* Accept probe requests only for the control interface */ |
| if (!combined_interfaces && intf != control_interface) |
| return -ENODEV; |
| |
| if (!combined_interfaces && usb_interface_claimed(data_interface)) { |
| /* valid in this context */ |
| dev_dbg(&intf->dev, "The data interface isn't available\n"); |
| return -EBUSY; |
| } |
| |
| |
| if (data_interface->cur_altsetting->desc.bNumEndpoints < 2) |
| return -EINVAL; |
| |
| epctrl = &control_interface->cur_altsetting->endpoint[0].desc; |
| epread = &data_interface->cur_altsetting->endpoint[0].desc; |
| epwrite = &data_interface->cur_altsetting->endpoint[1].desc; |
| |
| |
| /* workaround for switched endpoints */ |
| if (!usb_endpoint_dir_in(epread)) { |
| /* descriptors are swapped */ |
| struct usb_endpoint_descriptor *t; |
| dev_dbg(&intf->dev, |
| "The data interface has switched endpoints\n"); |
| t = epread; |
| epread = epwrite; |
| epwrite = t; |
| } |
| made_compressed_probe: |
| dbg("interfaces are valid"); |
| for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++); |
| |
| if (minor == ACM_TTY_MINORS) { |
| dev_err(&intf->dev, "no more free acm devices\n"); |
| return -ENODEV; |
| } |
| |
| acm = kzalloc(sizeof(struct acm), GFP_KERNEL); |
| if (acm == NULL) { |
| dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n"); |
| goto alloc_fail; |
| } |
| |
| ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize); |
| readsize = le16_to_cpu(epread->wMaxPacketSize) * |
| (quirks == SINGLE_RX_URB ? 1 : 2); |
| acm->combined_interfaces = combined_interfaces; |
| acm->writesize = le16_to_cpu(epwrite->wMaxPacketSize) * 20; |
| acm->control = control_interface; |
| acm->data = data_interface; |
| acm->minor = minor; |
| acm->dev = usb_dev; |
| acm->ctrl_caps = ac_management_function; |
| if (quirks & NO_CAP_LINE) |
| acm->ctrl_caps &= ~USB_CDC_CAP_LINE; |
| acm->ctrlsize = ctrlsize; |
| acm->readsize = readsize; |
| acm->rx_buflimit = num_rx_buf; |
| acm->urb_task.func = acm_rx_tasklet; |
| acm->urb_task.data = (unsigned long) acm; |
| INIT_WORK(&acm->work, acm_softint); |
| INIT_WORK(&acm->waker, acm_waker); |
| init_waitqueue_head(&acm->drain_wait); |
| spin_lock_init(&acm->throttle_lock); |
| spin_lock_init(&acm->write_lock); |
| spin_lock_init(&acm->read_lock); |
| mutex_init(&acm->mutex); |
| acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); |
| acm->is_int_ep = usb_endpoint_xfer_int(epread); |
| if (acm->is_int_ep) |
| acm->bInterval = epread->bInterval; |
| tty_port_init(&acm->port); |
| acm->port.ops = &acm_port_ops; |
| |
| buf = usb_buffer_alloc(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); |
| if (!buf) { |
| dev_dbg(&intf->dev, "out of memory (ctrl buffer alloc)\n"); |
| goto alloc_fail2; |
| } |
| acm->ctrl_buffer = buf; |
| |
| if (acm_write_buffers_alloc(acm) < 0) { |
| dev_dbg(&intf->dev, "out of memory (write buffer alloc)\n"); |
| goto alloc_fail4; |
| } |
| |
| acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!acm->ctrlurb) { |
| dev_dbg(&intf->dev, "out of memory (ctrlurb kmalloc)\n"); |
| goto alloc_fail5; |
| } |
| for (i = 0; i < num_rx_buf; i++) { |
| struct acm_ru *rcv = &(acm->ru[i]); |
| |
| rcv->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (rcv->urb == NULL) { |
| dev_dbg(&intf->dev, |
| "out of memory (read urbs usb_alloc_urb)\n"); |
| goto alloc_fail7; |
| } |
| |
| rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| rcv->instance = acm; |
| } |
| for (i = 0; i < num_rx_buf; i++) { |
| struct acm_rb *rb = &(acm->rb[i]); |
| |
| rb->base = usb_buffer_alloc(acm->dev, readsize, |
| GFP_KERNEL, &rb->dma); |
| if (!rb->base) { |
| dev_dbg(&intf->dev, |
| "out of memory (read bufs usb_buffer_alloc)\n"); |
| goto alloc_fail7; |
| } |
| } |
| for (i = 0; i < ACM_NW; i++) { |
| struct acm_wb *snd = &(acm->wb[i]); |
| |
| snd->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (snd->urb == NULL) { |
| dev_dbg(&intf->dev, |
| "out of memory (write urbs usb_alloc_urb)"); |
| goto alloc_fail7; |
| } |
| |
| if (usb_endpoint_xfer_int(epwrite)) |
| usb_fill_int_urb(snd->urb, usb_dev, |
| usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), |
| NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval); |
| else |
| usb_fill_bulk_urb(snd->urb, usb_dev, |
| usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), |
| NULL, acm->writesize, acm_write_bulk, snd); |
| snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| snd->instance = acm; |
| } |
| |
| usb_set_intfdata(intf, acm); |
| |
| i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); |
| if (i < 0) |
| goto alloc_fail8; |
| |
| if (cfd) { /* export the country data */ |
| acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL); |
| if (!acm->country_codes) |
| goto skip_countries; |
| acm->country_code_size = cfd->bLength - 4; |
| memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, |
| cfd->bLength - 4); |
| acm->country_rel_date = cfd->iCountryCodeRelDate; |
| |
| i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); |
| if (i < 0) { |
| kfree(acm->country_codes); |
| goto skip_countries; |
| } |
| |
| i = device_create_file(&intf->dev, |
| &dev_attr_iCountryCodeRelDate); |
| if (i < 0) { |
| kfree(acm->country_codes); |
| goto skip_countries; |
| } |
| } |
| |
| skip_countries: |
| usb_fill_int_urb(acm->ctrlurb, usb_dev, |
| usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), |
| acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, |
| /* works around buggy devices */ |
| epctrl->bInterval ? epctrl->bInterval : 0xff); |
| acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; |
| acm->ctrlurb->transfer_dma = acm->ctrl_dma; |
| |
| dev_info(&intf->dev, "ttyACM%d: USB ACM device\n", minor); |
| |
| acm_set_control(acm, acm->ctrlout); |
| |
| acm->line.dwDTERate = cpu_to_le32(9600); |
| acm->line.bDataBits = 8; |
| acm_set_line(acm, &acm->line); |
| |
| usb_driver_claim_interface(&acm_driver, data_interface, acm); |
| usb_set_intfdata(data_interface, acm); |
| |
| usb_get_intf(control_interface); |
| tty_register_device(acm_tty_driver, minor, &control_interface->dev); |
| |
| acm_table[minor] = acm; |
| |
| return 0; |
| alloc_fail8: |
| for (i = 0; i < ACM_NW; i++) |
| usb_free_urb(acm->wb[i].urb); |
| alloc_fail7: |
| acm_read_buffers_free(acm); |
| for (i = 0; i < num_rx_buf; i++) |
| usb_free_urb(acm->ru[i].urb); |
| usb_free_urb(acm->ctrlurb); |
| alloc_fail5: |
| acm_write_buffers_free(acm); |
| alloc_fail4: |
| usb_buffer_free(usb_dev, ctrlsize, acm->ctrl_buffer, acm->ctrl_dma); |
| alloc_fail2: |
| kfree(acm); |
| alloc_fail: |
| return -ENOMEM; |
| } |
| |
| static void stop_data_traffic(struct acm *acm) |
| { |
| int i; |
| dbg("Entering stop_data_traffic"); |
| |
| tasklet_disable(&acm->urb_task); |
| |
| usb_kill_urb(acm->ctrlurb); |
| for (i = 0; i < ACM_NW; i++) |
| usb_kill_urb(acm->wb[i].urb); |
| for (i = 0; i < acm->rx_buflimit; i++) |
| usb_kill_urb(acm->ru[i].urb); |
| |
| tasklet_enable(&acm->urb_task); |
| |
| cancel_work_sync(&acm->work); |
| cancel_work_sync(&acm->waker); |
| } |
| |
| static void acm_disconnect(struct usb_interface *intf) |
| { |
| struct acm *acm = usb_get_intfdata(intf); |
| struct usb_device *usb_dev = interface_to_usbdev(intf); |
| struct tty_struct *tty; |
| |
| /* sibling interface is already cleaning up */ |
| if (!acm) |
| return; |
| |
| mutex_lock(&open_mutex); |
| if (acm->country_codes) { |
| device_remove_file(&acm->control->dev, |
| &dev_attr_wCountryCodes); |
| device_remove_file(&acm->control->dev, |
| &dev_attr_iCountryCodeRelDate); |
| } |
| device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); |
| acm->dev = NULL; |
| usb_set_intfdata(acm->control, NULL); |
| usb_set_intfdata(acm->data, NULL); |
| |
| stop_data_traffic(acm); |
| |
| acm_write_buffers_free(acm); |
| usb_buffer_free(usb_dev, acm->ctrlsize, acm->ctrl_buffer, |
| acm->ctrl_dma); |
| acm_read_buffers_free(acm); |
| |
| if (!acm->combined_interfaces) |
| usb_driver_release_interface(&acm_driver, intf == acm->control ? |
| acm->data : acm->control); |
| |
| if (acm->port.count == 0) { |
| acm_tty_unregister(acm); |
| mutex_unlock(&open_mutex); |
| return; |
| } |
| |
| mutex_unlock(&open_mutex); |
| tty = tty_port_tty_get(&acm->port); |
| if (tty) { |
| tty_hangup(tty); |
| tty_kref_put(tty); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| static int acm_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct acm *acm = usb_get_intfdata(intf); |
| int cnt; |
| |
| if (message.event & PM_EVENT_AUTO) { |
| int b; |
| |
| spin_lock_irq(&acm->read_lock); |
| spin_lock(&acm->write_lock); |
| b = acm->processing + acm->transmitting; |
| spin_unlock(&acm->write_lock); |
| spin_unlock_irq(&acm->read_lock); |
| if (b) |
| return -EBUSY; |
| } |
| |
| spin_lock_irq(&acm->read_lock); |
| spin_lock(&acm->write_lock); |
| cnt = acm->susp_count++; |
| spin_unlock(&acm->write_lock); |
| spin_unlock_irq(&acm->read_lock); |
| |
| if (cnt) |
| return 0; |
| /* |
| we treat opened interfaces differently, |
| we must guard against open |
| */ |
| mutex_lock(&acm->mutex); |
| |
| if (acm->port.count) |
| stop_data_traffic(acm); |
| |
| mutex_unlock(&acm->mutex); |
| return 0; |
| } |
| |
| static int acm_resume(struct usb_interface *intf) |
| { |
| struct acm *acm = usb_get_intfdata(intf); |
| int rv = 0; |
| int cnt; |
| |
| spin_lock_irq(&acm->read_lock); |
| acm->susp_count -= 1; |
| cnt = acm->susp_count; |
| spin_unlock_irq(&acm->read_lock); |
| |
| if (cnt) |
| return 0; |
| |
| mutex_lock(&acm->mutex); |
| if (acm->port.count) { |
| rv = usb_submit_urb(acm->ctrlurb, GFP_NOIO); |
| if (rv < 0) |
| goto err_out; |
| |
| tasklet_schedule(&acm->urb_task); |
| } |
| |
| err_out: |
| mutex_unlock(&acm->mutex); |
| return rv; |
| } |
| |
| #endif /* CONFIG_PM */ |
| |
| #define NOKIA_PCSUITE_ACM_INFO(x) \ |
| USB_DEVICE_AND_INTERFACE_INFO(0x0421, x, \ |
| USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \ |
| USB_CDC_ACM_PROTO_VENDOR) |
| |
| /* |
| * USB driver structure. |
| */ |
| |
| static struct usb_device_id acm_ids[] = { |
| /* quirky and broken devices */ |
| { USB_DEVICE(0x0870, 0x0001), /* Metricom GS Modem */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x079b, 0x000f), /* BT On-Air USB MODEM */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0ace, 0x1602), /* ZyDAS 56K USB MODEM */ |
| .driver_info = SINGLE_RX_URB, |
| }, |
| { USB_DEVICE(0x0ace, 0x1608), /* ZyDAS 56K USB MODEM */ |
| .driver_info = SINGLE_RX_URB, /* firmware bug */ |
| }, |
| { USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */ |
| .driver_info = SINGLE_RX_URB, /* firmware bug */ |
| }, |
| { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ |
| .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ |
| }, |
| { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ |
| }, |
| { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ |
| .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on |
| data interface instead of |
| communications interface. |
| Maybe we should define a new |
| quirk for this. */ |
| }, |
| { USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */ |
| .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ |
| }, |
| |
| /* Nokia S60 phones expose two ACM channels. The first is |
| * a modem and is picked up by the standard AT-command |
| * information below. The second is 'vendor-specific' but |
| * is treated as a serial device at the S60 end, so we want |
| * to expose it on Linux too. */ |
| { NOKIA_PCSUITE_ACM_INFO(0x042D), }, /* Nokia 3250 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04D8), }, /* Nokia 5500 Sport */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04C9), }, /* Nokia E50 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0419), }, /* Nokia E60 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x044D), }, /* Nokia E61 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0001), }, /* Nokia E61i */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0475), }, /* Nokia E62 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0508), }, /* Nokia E65 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0418), }, /* Nokia E70 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0425), }, /* Nokia N71 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0486), }, /* Nokia N73 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04DF), }, /* Nokia N75 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x000e), }, /* Nokia N77 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0445), }, /* Nokia N80 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x042F), }, /* Nokia N91 & N91 8GB */ |
| { NOKIA_PCSUITE_ACM_INFO(0x048E), }, /* Nokia N92 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0420), }, /* Nokia N93 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04E6), }, /* Nokia N93i */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04B2), }, /* Nokia 5700 XpressMusic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0134), }, /* Nokia 6110 Navigator (China) */ |
| { NOKIA_PCSUITE_ACM_INFO(0x046E), }, /* Nokia 6110 Navigator */ |
| { NOKIA_PCSUITE_ACM_INFO(0x002f), }, /* Nokia 6120 classic & */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0088), }, /* Nokia 6121 classic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00fc), }, /* Nokia 6124 classic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0042), }, /* Nokia E51 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00b0), }, /* Nokia E66 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00ab), }, /* Nokia E71 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0481), }, /* Nokia N76 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0007), }, /* Nokia N81 & N81 8GB */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0071), }, /* Nokia N82 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x04F0), }, /* Nokia N95 & N95-3 NAM */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0070), }, /* Nokia N95 8GB */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0099), }, /* Nokia 6210 Navigator, RM-367 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0128), }, /* Nokia 6210 Navigator, RM-419 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x008f), }, /* Nokia 6220 Classic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00a0), }, /* Nokia 6650 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x007b), }, /* Nokia N78 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0094), }, /* Nokia N85 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x003a), }, /* Nokia N96 & N96-3 */ |
| { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ |
| { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */ |
| { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */ |
| |
| /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ |
| |
| /* control interfaces with various AT-command sets */ |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_V25TER) }, |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_PCCA101) }, |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_PCCA101_WAKE) }, |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_GSM) }, |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_3G) }, |
| { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, |
| USB_CDC_ACM_PROTO_AT_CDMA) }, |
| |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, acm_ids); |
| |
| static struct usb_driver acm_driver = { |
| .name = "cdc_acm", |
| .probe = acm_probe, |
| .disconnect = acm_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = acm_suspend, |
| .resume = acm_resume, |
| #endif |
| .id_table = acm_ids, |
| #ifdef CONFIG_PM |
| .supports_autosuspend = 1, |
| #endif |
| }; |
| |
| /* |
| * TTY driver structures. |
| */ |
| |
| static const struct tty_operations acm_ops = { |
| .open = acm_tty_open, |
| .close = acm_tty_close, |
| .hangup = acm_tty_hangup, |
| .write = acm_tty_write, |
| .write_room = acm_tty_write_room, |
| .ioctl = acm_tty_ioctl, |
| .throttle = acm_tty_throttle, |
| .unthrottle = acm_tty_unthrottle, |
| .chars_in_buffer = acm_tty_chars_in_buffer, |
| .break_ctl = acm_tty_break_ctl, |
| .set_termios = acm_tty_set_termios, |
| .tiocmget = acm_tty_tiocmget, |
| .tiocmset = acm_tty_tiocmset, |
| }; |
| |
| /* |
| * Init / exit. |
| */ |
| |
| static int __init acm_init(void) |
| { |
| int retval; |
| acm_tty_driver = alloc_tty_driver(ACM_TTY_MINORS); |
| if (!acm_tty_driver) |
| return -ENOMEM; |
| acm_tty_driver->owner = THIS_MODULE, |
| acm_tty_driver->driver_name = "acm", |
| acm_tty_driver->name = "ttyACM", |
| acm_tty_driver->major = ACM_TTY_MAJOR, |
| acm_tty_driver->minor_start = 0, |
| acm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL, |
| acm_tty_driver->subtype = SERIAL_TYPE_NORMAL, |
| acm_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; |
| acm_tty_driver->init_termios = tty_std_termios; |
| acm_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | |
| HUPCL | CLOCAL; |
| tty_set_operations(acm_tty_driver, &acm_ops); |
| |
| retval = tty_register_driver(acm_tty_driver); |
| if (retval) { |
| put_tty_driver(acm_tty_driver); |
| return retval; |
| } |
| |
| retval = usb_register(&acm_driver); |
| if (retval) { |
| tty_unregister_driver(acm_tty_driver); |
| put_tty_driver(acm_tty_driver); |
| return retval; |
| } |
| |
| printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" |
| DRIVER_DESC "\n"); |
| |
| return 0; |
| } |
| |
| static void __exit acm_exit(void) |
| { |
| usb_deregister(&acm_driver); |
| tty_unregister_driver(acm_tty_driver); |
| put_tty_driver(acm_tty_driver); |
| } |
| |
| module_init(acm_init); |
| module_exit(acm_exit); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_CHARDEV_MAJOR(ACM_TTY_MAJOR); |