| /* |
| * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/irq.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| |
| #include <mach/common.h> |
| #include <mach/iomux-mx23.h> |
| |
| #include "devices-mx23.h" |
| |
| #define MX23EVK_LCD_ENABLE MXS_GPIO_NR(1, 18) |
| #define MX23EVK_BL_ENABLE MXS_GPIO_NR(1, 28) |
| |
| static const iomux_cfg_t mx23evk_pads[] __initconst = { |
| /* duart */ |
| MX23_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, |
| MX23_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, |
| |
| /* auart */ |
| MX23_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, |
| MX23_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, |
| MX23_PAD_AUART1_CTS__AUART1_CTS | MXS_PAD_CTRL, |
| MX23_PAD_AUART1_RTS__AUART1_RTS | MXS_PAD_CTRL, |
| |
| /* mxsfb (lcdif) */ |
| MX23_PAD_LCD_D00__LCD_D00 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D01__LCD_D01 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D02__LCD_D02 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D03__LCD_D03 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D04__LCD_D04 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D05__LCD_D05 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D06__LCD_D06 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D07__LCD_D07 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D08__LCD_D08 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D09__LCD_D09 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D08__LCD_D18 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D09__LCD_D19 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D10__LCD_D20 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D11__LCD_D21 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D12__LCD_D22 | MXS_PAD_CTRL, |
| MX23_PAD_GPMI_D13__LCD_D23 | MXS_PAD_CTRL, |
| MX23_PAD_LCD_VSYNC__LCD_VSYNC | MXS_PAD_CTRL, |
| MX23_PAD_LCD_HSYNC__LCD_HSYNC | MXS_PAD_CTRL, |
| MX23_PAD_LCD_DOTCK__LCD_DOTCK | MXS_PAD_CTRL, |
| MX23_PAD_LCD_ENABLE__LCD_ENABLE | MXS_PAD_CTRL, |
| /* LCD panel enable */ |
| MX23_PAD_LCD_RESET__GPIO_1_18 | MXS_PAD_CTRL, |
| /* backlight control */ |
| MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_CTRL, |
| }; |
| |
| /* mxsfb (lcdif) */ |
| static struct fb_videomode mx23evk_video_modes[] = { |
| { |
| .name = "Samsung-LMS430HF02", |
| .refresh = 60, |
| .xres = 480, |
| .yres = 272, |
| .pixclock = 108096, /* picosecond (9.2 MHz) */ |
| .left_margin = 15, |
| .right_margin = 8, |
| .upper_margin = 12, |
| .lower_margin = 4, |
| .hsync_len = 1, |
| .vsync_len = 1, |
| .sync = FB_SYNC_DATA_ENABLE_HIGH_ACT | |
| FB_SYNC_DOTCLK_FAILING_ACT, |
| }, |
| }; |
| |
| static const struct mxsfb_platform_data mx23evk_mxsfb_pdata __initconst = { |
| .mode_list = mx23evk_video_modes, |
| .mode_count = ARRAY_SIZE(mx23evk_video_modes), |
| .default_bpp = 32, |
| .ld_intf_width = STMLCDIF_24BIT, |
| }; |
| |
| static void __init mx23evk_init(void) |
| { |
| int ret; |
| |
| mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads)); |
| |
| mx23_add_duart(); |
| mx23_add_auart0(); |
| |
| ret = gpio_request_one(MX23EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable"); |
| if (ret) |
| pr_warn("failed to request gpio lcd-enable: %d\n", ret); |
| else |
| gpio_set_value(MX23EVK_LCD_ENABLE, 1); |
| |
| ret = gpio_request_one(MX23EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable"); |
| if (ret) |
| pr_warn("failed to request gpio bl-enable: %d\n", ret); |
| else |
| gpio_set_value(MX23EVK_BL_ENABLE, 1); |
| |
| mx23_add_mxsfb(&mx23evk_mxsfb_pdata); |
| } |
| |
| static void __init mx23evk_timer_init(void) |
| { |
| mx23_clocks_init(); |
| } |
| |
| static struct sys_timer mx23evk_timer = { |
| .init = mx23evk_timer_init, |
| }; |
| |
| MACHINE_START(MX23EVK, "Freescale MX23 EVK") |
| /* Maintainer: Freescale Semiconductor, Inc. */ |
| .map_io = mx23_map_io, |
| .init_irq = mx23_init_irq, |
| .init_machine = mx23evk_init, |
| .timer = &mx23evk_timer, |
| MACHINE_END |