| /* |
| * Board setup routines for the Motorola PrPMC2800 |
| * |
| * Author: Dale Farnsworth <dale@farnsworth.org> |
| * |
| * 2007 (c) MontaVista, Software, Inc. This file is licensed under |
| * the terms of the GNU General Public License version 2. This program |
| * is licensed "as is" without any warranty of any kind, whether express |
| * or implied. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/seq_file.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/prom.h> |
| #include <asm/system.h> |
| #include <asm/time.h> |
| #include <asm/kexec.h> |
| |
| #include <mm/mmu_decl.h> |
| |
| #include <sysdev/mv64x60.h> |
| |
| #define MV64x60_MPP_CNTL_0 0x0000 |
| #define MV64x60_MPP_CNTL_2 0x0008 |
| |
| #define MV64x60_GPP_IO_CNTL 0x0000 |
| #define MV64x60_GPP_LEVEL_CNTL 0x0010 |
| #define MV64x60_GPP_VALUE_SET 0x0018 |
| |
| #define PLATFORM_NAME_MAX 32 |
| |
| static char prpmc2800_platform_name[PLATFORM_NAME_MAX]; |
| |
| static void __iomem *mv64x60_mpp_reg_base; |
| static void __iomem *mv64x60_gpp_reg_base; |
| |
| static void __init prpmc2800_setup_arch(void) |
| { |
| struct device_node *np; |
| phys_addr_t paddr; |
| const unsigned int *reg; |
| |
| /* |
| * ioremap mpp and gpp registers in case they are later |
| * needed by prpmc2800_reset_board(). |
| */ |
| np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp"); |
| reg = of_get_property(np, "reg", NULL); |
| paddr = of_translate_address(np, reg); |
| of_node_put(np); |
| mv64x60_mpp_reg_base = ioremap(paddr, reg[1]); |
| |
| np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp"); |
| reg = of_get_property(np, "reg", NULL); |
| paddr = of_translate_address(np, reg); |
| of_node_put(np); |
| mv64x60_gpp_reg_base = ioremap(paddr, reg[1]); |
| |
| #ifdef CONFIG_PCI |
| mv64x60_pci_init(); |
| #endif |
| |
| printk("Motorola %s\n", prpmc2800_platform_name); |
| } |
| |
| static void prpmc2800_reset_board(void) |
| { |
| u32 temp; |
| |
| local_irq_disable(); |
| |
| temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0); |
| temp &= 0xFFFF0FFF; |
| out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp); |
| |
| temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); |
| temp |= 0x00000004; |
| out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); |
| |
| temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); |
| temp |= 0x00000004; |
| out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); |
| |
| temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2); |
| temp &= 0xFFFF0FFF; |
| out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp); |
| |
| temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL); |
| temp |= 0x00080000; |
| out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp); |
| |
| temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL); |
| temp |= 0x00080000; |
| out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp); |
| |
| out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004); |
| } |
| |
| static void prpmc2800_restart(char *cmd) |
| { |
| volatile ulong i = 10000000; |
| |
| prpmc2800_reset_board(); |
| |
| while (i-- > 0); |
| panic("restart failed\n"); |
| } |
| |
| #ifdef CONFIG_NOT_COHERENT_CACHE |
| #define PPRPM2800_COHERENCY_SETTING "off" |
| #else |
| #define PPRPM2800_COHERENCY_SETTING "on" |
| #endif |
| |
| void prpmc2800_show_cpuinfo(struct seq_file *m) |
| { |
| seq_printf(m, "Vendor\t\t: Motorola\n"); |
| seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING); |
| } |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init prpmc2800_probe(void) |
| { |
| unsigned long root = of_get_flat_dt_root(); |
| unsigned long len = PLATFORM_NAME_MAX; |
| void *m; |
| |
| if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800")) |
| return 0; |
| |
| /* Update ppc_md.name with name from dt */ |
| m = of_get_flat_dt_prop(root, "model", &len); |
| if (m) |
| strncpy(prpmc2800_platform_name, m, |
| min((int)len, PLATFORM_NAME_MAX - 1)); |
| |
| _set_L2CR(_get_L2CR() | L2CR_L2E); |
| return 1; |
| } |
| |
| define_machine(prpmc2800){ |
| .name = prpmc2800_platform_name, |
| .probe = prpmc2800_probe, |
| .setup_arch = prpmc2800_setup_arch, |
| .init_early = mv64x60_init_early, |
| .show_cpuinfo = prpmc2800_show_cpuinfo, |
| .init_IRQ = mv64x60_init_irq, |
| .get_irq = mv64x60_get_irq, |
| .restart = prpmc2800_restart, |
| .calibrate_decr = generic_calibrate_decr, |
| #ifdef CONFIG_KEXEC |
| .machine_kexec = default_machine_kexec, |
| .machine_kexec_prepare = default_machine_kexec_prepare, |
| .machine_crash_shutdown = default_machine_crash_shutdown, |
| #endif |
| }; |