| /* |
| * linux/arch/arm/mach-omap2/hsmmc.c |
| * |
| * Copyright (C) 2007-2008 Texas Instruments |
| * Copyright (C) 2008 Nokia Corporation |
| * Author: Texas Instruments |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <mach/hardware.h> |
| #include <plat/mmc.h> |
| #include <plat/omap-pm.h> |
| |
| #include "hsmmc.h" |
| #include "control.h" |
| |
| #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) |
| |
| static u16 control_pbias_offset; |
| static u16 control_devconf1_offset; |
| static u16 control_mmc1; |
| |
| #define HSMMC_NAME_LEN 9 |
| |
| static struct hsmmc_controller { |
| char name[HSMMC_NAME_LEN + 1]; |
| } hsmmc[OMAP34XX_NR_MMC]; |
| |
| #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) |
| |
| static int hsmmc_get_context_loss(struct device *dev) |
| { |
| return omap_pm_get_dev_context_loss_count(dev); |
| } |
| |
| #else |
| #define hsmmc_get_context_loss NULL |
| #endif |
| |
| static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, |
| int power_on, int vdd) |
| { |
| u32 reg, prog_io; |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| if (mmc->slots[0].remux) |
| mmc->slots[0].remux(dev, slot, power_on); |
| |
| /* |
| * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the |
| * card with Vcc regulator (from twl4030 or whatever). OMAP has both |
| * 1.8V and 3.0V modes, controlled by the PBIAS register. |
| * |
| * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which |
| * is most naturally TWL VSIM; those pins also use PBIAS. |
| * |
| * FIXME handle VMMC1A as needed ... |
| */ |
| if (power_on) { |
| if (cpu_is_omap2430()) { |
| reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1); |
| if ((1 << vdd) >= MMC_VDD_30_31) |
| reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE; |
| else |
| reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE; |
| omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1); |
| } |
| |
| if (mmc->slots[0].internal_clock) { |
| reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); |
| reg |= OMAP2_MMCSDIO1ADPCLKISEL; |
| omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0); |
| } |
| |
| reg = omap_ctrl_readl(control_pbias_offset); |
| if (cpu_is_omap3630()) { |
| /* Set MMC I/O to 52Mhz */ |
| prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); |
| prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; |
| omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); |
| } else { |
| reg |= OMAP2_PBIASSPEEDCTRL0; |
| } |
| reg &= ~OMAP2_PBIASLITEPWRDNZ0; |
| omap_ctrl_writel(reg, control_pbias_offset); |
| } else { |
| reg = omap_ctrl_readl(control_pbias_offset); |
| reg &= ~OMAP2_PBIASLITEPWRDNZ0; |
| omap_ctrl_writel(reg, control_pbias_offset); |
| } |
| } |
| |
| static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, |
| int power_on, int vdd) |
| { |
| u32 reg; |
| |
| /* 100ms delay required for PBIAS configuration */ |
| msleep(100); |
| |
| if (power_on) { |
| reg = omap_ctrl_readl(control_pbias_offset); |
| reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0); |
| if ((1 << vdd) <= MMC_VDD_165_195) |
| reg &= ~OMAP2_PBIASLITEVMODE0; |
| else |
| reg |= OMAP2_PBIASLITEVMODE0; |
| omap_ctrl_writel(reg, control_pbias_offset); |
| } else { |
| reg = omap_ctrl_readl(control_pbias_offset); |
| reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 | |
| OMAP2_PBIASLITEVMODE0); |
| omap_ctrl_writel(reg, control_pbias_offset); |
| } |
| } |
| |
| static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, |
| int power_on, int vdd) |
| { |
| u32 reg; |
| |
| /* |
| * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the |
| * card with Vcc regulator (from twl4030 or whatever). OMAP has both |
| * 1.8V and 3.0V modes, controlled by the PBIAS register. |
| * |
| * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which |
| * is most naturally TWL VSIM; those pins also use PBIAS. |
| * |
| * FIXME handle VMMC1A as needed ... |
| */ |
| reg = omap4_ctrl_pad_readl(control_pbias_offset); |
| reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | |
| OMAP4_MMC1_PWRDNZ_MASK | |
| OMAP4_USBC1_ICUSB_PWRDNZ_MASK); |
| omap4_ctrl_pad_writel(reg, control_pbias_offset); |
| } |
| |
| static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, |
| int power_on, int vdd) |
| { |
| u32 reg; |
| |
| if (power_on) { |
| reg = omap4_ctrl_pad_readl(control_pbias_offset); |
| reg |= OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK; |
| if ((1 << vdd) <= MMC_VDD_165_195) |
| reg &= ~OMAP4_MMC1_PBIASLITE_VMODE_MASK; |
| else |
| reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; |
| reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | |
| OMAP4_MMC1_PWRDNZ_MASK | |
| OMAP4_USBC1_ICUSB_PWRDNZ_MASK); |
| omap4_ctrl_pad_writel(reg, control_pbias_offset); |
| /* 4 microsec delay for comparator to generate an error*/ |
| udelay(4); |
| reg = omap4_ctrl_pad_readl(control_pbias_offset); |
| if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { |
| pr_err("Pbias Voltage is not same as LDO\n"); |
| /* Caution : On VMODE_ERROR Power Down MMC IO */ |
| reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | |
| OMAP4_USBC1_ICUSB_PWRDNZ_MASK); |
| omap4_ctrl_pad_writel(reg, control_pbias_offset); |
| } |
| } else { |
| reg = omap4_ctrl_pad_readl(control_pbias_offset); |
| reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | |
| OMAP4_MMC1_PWRDNZ_MASK | |
| OMAP4_MMC1_PBIASLITE_VMODE_MASK | |
| OMAP4_USBC1_ICUSB_PWRDNZ_MASK); |
| omap4_ctrl_pad_writel(reg, control_pbias_offset); |
| } |
| } |
| |
| static void hsmmc23_before_set_reg(struct device *dev, int slot, |
| int power_on, int vdd) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| if (mmc->slots[0].remux) |
| mmc->slots[0].remux(dev, slot, power_on); |
| |
| if (power_on) { |
| /* Only MMC2 supports a CLKIN */ |
| if (mmc->slots[0].internal_clock) { |
| u32 reg; |
| |
| reg = omap_ctrl_readl(control_devconf1_offset); |
| reg |= OMAP2_MMCSDIO2ADPCLKISEL; |
| omap_ctrl_writel(reg, control_devconf1_offset); |
| } |
| } |
| } |
| |
| static int nop_mmc_set_power(struct device *dev, int slot, int power_on, |
| int vdd) |
| { |
| return 0; |
| } |
| |
| static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; |
| |
| void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) |
| { |
| struct omap2_hsmmc_info *c; |
| int nr_hsmmc = ARRAY_SIZE(hsmmc_data); |
| int i; |
| u32 reg; |
| |
| if (!cpu_is_omap44xx()) { |
| if (cpu_is_omap2430()) { |
| control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; |
| control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; |
| } else { |
| control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; |
| control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; |
| } |
| } else { |
| control_pbias_offset = |
| OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; |
| control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; |
| reg = omap4_ctrl_pad_readl(control_mmc1); |
| reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | |
| OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); |
| reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | |
| OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); |
| reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| |
| OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | |
| OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); |
| omap4_ctrl_pad_writel(reg, control_mmc1); |
| } |
| |
| for (c = controllers; c->mmc; c++) { |
| struct hsmmc_controller *hc = hsmmc + c->mmc - 1; |
| struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; |
| |
| if (!c->mmc || c->mmc > nr_hsmmc) { |
| pr_debug("MMC%d: no such controller\n", c->mmc); |
| continue; |
| } |
| if (mmc) { |
| pr_debug("MMC%d: already configured\n", c->mmc); |
| continue; |
| } |
| |
| mmc = kzalloc(sizeof(struct omap_mmc_platform_data), |
| GFP_KERNEL); |
| if (!mmc) { |
| pr_err("Cannot allocate memory for mmc device!\n"); |
| goto done; |
| } |
| |
| if (c->name) |
| strncpy(hc->name, c->name, HSMMC_NAME_LEN); |
| else |
| snprintf(hc->name, ARRAY_SIZE(hc->name), |
| "mmc%islot%i", c->mmc, 1); |
| mmc->slots[0].name = hc->name; |
| mmc->nr_slots = 1; |
| mmc->slots[0].caps = c->caps; |
| mmc->slots[0].internal_clock = !c->ext_clock; |
| mmc->dma_mask = 0xffffffff; |
| if (cpu_is_omap44xx()) |
| mmc->reg_offset = OMAP4_MMC_REG_OFFSET; |
| else |
| mmc->reg_offset = 0; |
| |
| mmc->get_context_loss_count = hsmmc_get_context_loss; |
| |
| mmc->slots[0].switch_pin = c->gpio_cd; |
| mmc->slots[0].gpio_wp = c->gpio_wp; |
| |
| mmc->slots[0].remux = c->remux; |
| mmc->slots[0].init_card = c->init_card; |
| |
| if (c->cover_only) |
| mmc->slots[0].cover = 1; |
| |
| if (c->nonremovable) |
| mmc->slots[0].nonremovable = 1; |
| |
| if (c->power_saving) |
| mmc->slots[0].power_saving = 1; |
| |
| if (c->no_off) |
| mmc->slots[0].no_off = 1; |
| |
| if (c->vcc_aux_disable_is_sleep) |
| mmc->slots[0].vcc_aux_disable_is_sleep = 1; |
| |
| /* NOTE: MMC slots should have a Vcc regulator set up. |
| * This may be from a TWL4030-family chip, another |
| * controllable regulator, or a fixed supply. |
| * |
| * temporary HACK: ocr_mask instead of fixed supply |
| */ |
| mmc->slots[0].ocr_mask = c->ocr_mask; |
| |
| if (cpu_is_omap3517() || cpu_is_omap3505()) |
| mmc->slots[0].set_power = nop_mmc_set_power; |
| else |
| mmc->slots[0].features |= HSMMC_HAS_PBIAS; |
| |
| if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) |
| mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; |
| |
| switch (c->mmc) { |
| case 1: |
| if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { |
| /* on-chip level shifting via PBIAS0/PBIAS1 */ |
| if (cpu_is_omap44xx()) { |
| mmc->slots[0].before_set_reg = |
| omap4_hsmmc1_before_set_reg; |
| mmc->slots[0].after_set_reg = |
| omap4_hsmmc1_after_set_reg; |
| } else { |
| mmc->slots[0].before_set_reg = |
| omap_hsmmc1_before_set_reg; |
| mmc->slots[0].after_set_reg = |
| omap_hsmmc1_after_set_reg; |
| } |
| } |
| |
| /* Omap3630 HSMMC1 supports only 4-bit */ |
| if (cpu_is_omap3630() && |
| (c->caps & MMC_CAP_8_BIT_DATA)) { |
| c->caps &= ~MMC_CAP_8_BIT_DATA; |
| c->caps |= MMC_CAP_4_BIT_DATA; |
| mmc->slots[0].caps = c->caps; |
| } |
| break; |
| case 2: |
| if (c->ext_clock) |
| c->transceiver = 1; |
| if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { |
| c->caps &= ~MMC_CAP_8_BIT_DATA; |
| c->caps |= MMC_CAP_4_BIT_DATA; |
| } |
| /* FALLTHROUGH */ |
| case 3: |
| if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { |
| /* off-chip level shifting, or none */ |
| mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; |
| mmc->slots[0].after_set_reg = NULL; |
| } |
| break; |
| default: |
| pr_err("MMC%d configuration not supported!\n", c->mmc); |
| kfree(mmc); |
| continue; |
| } |
| hsmmc_data[c->mmc - 1] = mmc; |
| } |
| |
| omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); |
| |
| /* pass the device nodes back to board setup code */ |
| for (c = controllers; c->mmc; c++) { |
| struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; |
| |
| if (!c->mmc || c->mmc > nr_hsmmc) |
| continue; |
| c->dev = mmc->dev; |
| } |
| |
| done: |
| for (i = 0; i < nr_hsmmc; i++) |
| kfree(hsmmc_data[i]); |
| } |
| |
| #endif |