| /* |
| * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver |
| * |
| * Copyright (C) 2005 SAN People |
| * Copyright (C) 2008 Atmel |
| * |
| * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> |
| * ATMEL CORP. |
| * |
| * Based on at91-ssc.c by |
| * Frank Mandarino <fmandarino@endrelia.com> |
| * Based on pxa2xx Platform drivers by |
| * Liam Girdwood <lrg@slimlogic.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/atmel_pdc.h> |
| |
| #include <linux/atmel-ssc.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/initval.h> |
| #include <sound/soc.h> |
| |
| #include "atmel-pcm.h" |
| #include "atmel_ssc_dai.h" |
| |
| |
| #define NUM_SSC_DEVICES 3 |
| |
| /* |
| * SSC PDC registers required by the PCM DMA engine. |
| */ |
| static struct atmel_pdc_regs pdc_tx_reg = { |
| .xpr = ATMEL_PDC_TPR, |
| .xcr = ATMEL_PDC_TCR, |
| .xnpr = ATMEL_PDC_TNPR, |
| .xncr = ATMEL_PDC_TNCR, |
| }; |
| |
| static struct atmel_pdc_regs pdc_rx_reg = { |
| .xpr = ATMEL_PDC_RPR, |
| .xcr = ATMEL_PDC_RCR, |
| .xnpr = ATMEL_PDC_RNPR, |
| .xncr = ATMEL_PDC_RNCR, |
| }; |
| |
| /* |
| * SSC & PDC status bits for transmit and receive. |
| */ |
| static struct atmel_ssc_mask ssc_tx_mask = { |
| .ssc_enable = SSC_BIT(CR_TXEN), |
| .ssc_disable = SSC_BIT(CR_TXDIS), |
| .ssc_endx = SSC_BIT(SR_ENDTX), |
| .ssc_endbuf = SSC_BIT(SR_TXBUFE), |
| .ssc_error = SSC_BIT(SR_OVRUN), |
| .pdc_enable = ATMEL_PDC_TXTEN, |
| .pdc_disable = ATMEL_PDC_TXTDIS, |
| }; |
| |
| static struct atmel_ssc_mask ssc_rx_mask = { |
| .ssc_enable = SSC_BIT(CR_RXEN), |
| .ssc_disable = SSC_BIT(CR_RXDIS), |
| .ssc_endx = SSC_BIT(SR_ENDRX), |
| .ssc_endbuf = SSC_BIT(SR_RXBUFF), |
| .ssc_error = SSC_BIT(SR_OVRUN), |
| .pdc_enable = ATMEL_PDC_RXTEN, |
| .pdc_disable = ATMEL_PDC_RXTDIS, |
| }; |
| |
| |
| /* |
| * DMA parameters. |
| */ |
| static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { |
| {{ |
| .name = "SSC0 PCM out", |
| .pdc = &pdc_tx_reg, |
| .mask = &ssc_tx_mask, |
| }, |
| { |
| .name = "SSC0 PCM in", |
| .pdc = &pdc_rx_reg, |
| .mask = &ssc_rx_mask, |
| } }, |
| {{ |
| .name = "SSC1 PCM out", |
| .pdc = &pdc_tx_reg, |
| .mask = &ssc_tx_mask, |
| }, |
| { |
| .name = "SSC1 PCM in", |
| .pdc = &pdc_rx_reg, |
| .mask = &ssc_rx_mask, |
| } }, |
| {{ |
| .name = "SSC2 PCM out", |
| .pdc = &pdc_tx_reg, |
| .mask = &ssc_tx_mask, |
| }, |
| { |
| .name = "SSC2 PCM in", |
| .pdc = &pdc_rx_reg, |
| .mask = &ssc_rx_mask, |
| } }, |
| }; |
| |
| |
| static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { |
| { |
| .name = "ssc0", |
| .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), |
| .dir_mask = SSC_DIR_MASK_UNUSED, |
| .initialized = 0, |
| }, |
| { |
| .name = "ssc1", |
| .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), |
| .dir_mask = SSC_DIR_MASK_UNUSED, |
| .initialized = 0, |
| }, |
| { |
| .name = "ssc2", |
| .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), |
| .dir_mask = SSC_DIR_MASK_UNUSED, |
| .initialized = 0, |
| }, |
| }; |
| |
| |
| /* |
| * SSC interrupt handler. Passes PDC interrupts to the DMA |
| * interrupt handler in the PCM driver. |
| */ |
| static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) |
| { |
| struct atmel_ssc_info *ssc_p = dev_id; |
| struct atmel_pcm_dma_params *dma_params; |
| u32 ssc_sr; |
| u32 ssc_substream_mask; |
| int i; |
| |
| ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) |
| & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); |
| |
| /* |
| * Loop through the substreams attached to this SSC. If |
| * a DMA-related interrupt occurred on that substream, call |
| * the DMA interrupt handler function, if one has been |
| * registered in the dma_params structure by the PCM driver. |
| */ |
| for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { |
| dma_params = ssc_p->dma_params[i]; |
| |
| if ((dma_params != NULL) && |
| (dma_params->dma_intr_handler != NULL)) { |
| ssc_substream_mask = (dma_params->mask->ssc_endx | |
| dma_params->mask->ssc_endbuf); |
| if (ssc_sr & ssc_substream_mask) { |
| dma_params->dma_intr_handler(ssc_sr, |
| dma_params-> |
| substream); |
| } |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*\ |
| * DAI functions |
| \*-------------------------------------------------------------------------*/ |
| /* |
| * Startup. Only that one substream allowed in each direction. |
| */ |
| static int atmel_ssc_startup(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; |
| struct atmel_pcm_dma_params *dma_params; |
| int dir, dir_mask; |
| |
| pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", |
| ssc_readl(ssc_p->ssc->regs, SR)); |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| dir = 0; |
| dir_mask = SSC_DIR_MASK_PLAYBACK; |
| } else { |
| dir = 1; |
| dir_mask = SSC_DIR_MASK_CAPTURE; |
| } |
| |
| dma_params = &ssc_dma_params[dai->id][dir]; |
| dma_params->ssc = ssc_p->ssc; |
| dma_params->substream = substream; |
| |
| ssc_p->dma_params[dir] = dma_params; |
| |
| snd_soc_dai_set_dma_data(dai, substream, dma_params); |
| |
| spin_lock_irq(&ssc_p->lock); |
| if (ssc_p->dir_mask & dir_mask) { |
| spin_unlock_irq(&ssc_p->lock); |
| return -EBUSY; |
| } |
| ssc_p->dir_mask |= dir_mask; |
| spin_unlock_irq(&ssc_p->lock); |
| |
| return 0; |
| } |
| |
| /* |
| * Shutdown. Clear DMA parameters and shutdown the SSC if there |
| * are no other substreams open. |
| */ |
| static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; |
| struct atmel_pcm_dma_params *dma_params; |
| int dir, dir_mask; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dir = 0; |
| else |
| dir = 1; |
| |
| dma_params = ssc_p->dma_params[dir]; |
| |
| if (dma_params != NULL) { |
| ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); |
| pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", |
| (dir ? "receive" : "transmit"), |
| ssc_readl(ssc_p->ssc->regs, SR)); |
| |
| dma_params->ssc = NULL; |
| dma_params->substream = NULL; |
| ssc_p->dma_params[dir] = NULL; |
| } |
| |
| dir_mask = 1 << dir; |
| |
| spin_lock_irq(&ssc_p->lock); |
| ssc_p->dir_mask &= ~dir_mask; |
| if (!ssc_p->dir_mask) { |
| if (ssc_p->initialized) { |
| /* Shutdown the SSC clock. */ |
| pr_debug("atmel_ssc_dai: Stopping clock\n"); |
| clk_disable(ssc_p->ssc->clk); |
| |
| free_irq(ssc_p->ssc->irq, ssc_p); |
| ssc_p->initialized = 0; |
| } |
| |
| /* Reset the SSC */ |
| ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); |
| /* Clear the SSC dividers */ |
| ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; |
| } |
| spin_unlock_irq(&ssc_p->lock); |
| } |
| |
| |
| /* |
| * Record the DAI format for use in hw_params(). |
| */ |
| static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, |
| unsigned int fmt) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; |
| |
| ssc_p->daifmt = fmt; |
| return 0; |
| } |
| |
| /* |
| * Record SSC clock dividers for use in hw_params(). |
| */ |
| static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, |
| int div_id, int div) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; |
| |
| switch (div_id) { |
| case ATMEL_SSC_CMR_DIV: |
| /* |
| * The same master clock divider is used for both |
| * transmit and receive, so if a value has already |
| * been set, it must match this value. |
| */ |
| if (ssc_p->dir_mask != |
| (SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE)) |
| ssc_p->cmr_div = div; |
| else if (ssc_p->cmr_div == 0) |
| ssc_p->cmr_div = div; |
| else |
| if (div != ssc_p->cmr_div) |
| return -EBUSY; |
| break; |
| |
| case ATMEL_SSC_TCMR_PERIOD: |
| ssc_p->tcmr_period = div; |
| break; |
| |
| case ATMEL_SSC_RCMR_PERIOD: |
| ssc_p->rcmr_period = div; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Configure the SSC. |
| */ |
| static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| int id = dai->id; |
| struct atmel_ssc_info *ssc_p = &ssc_info[id]; |
| struct ssc_device *ssc = ssc_p->ssc; |
| struct atmel_pcm_dma_params *dma_params; |
| int dir, channels, bits; |
| u32 tfmr, rfmr, tcmr, rcmr; |
| int start_event; |
| int ret; |
| int fslen, fslen_ext; |
| |
| /* |
| * Currently, there is only one set of dma params for |
| * each direction. If more are added, this code will |
| * have to be changed to select the proper set. |
| */ |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dir = 0; |
| else |
| dir = 1; |
| |
| dma_params = ssc_p->dma_params[dir]; |
| |
| channels = params_channels(params); |
| |
| /* |
| * Determine sample size in bits and the PDC increment. |
| */ |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S8: |
| bits = 8; |
| dma_params->pdc_xfer_size = 1; |
| break; |
| case SNDRV_PCM_FORMAT_S16_LE: |
| bits = 16; |
| dma_params->pdc_xfer_size = 2; |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| bits = 24; |
| dma_params->pdc_xfer_size = 4; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| bits = 32; |
| dma_params->pdc_xfer_size = 4; |
| break; |
| default: |
| printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Compute SSC register settings. |
| */ |
| switch (ssc_p->daifmt |
| & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { |
| |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: |
| /* |
| * I2S format, SSC provides BCLK and LRC clocks. |
| * |
| * The SSC transmit and receive clocks are generated |
| * from the MCK divider, and the BCLK signal |
| * is output on the SSC TK line. |
| */ |
| |
| if (bits > 16 && !ssc->pdata->has_fslen_ext) { |
| dev_err(dai->dev, |
| "sample size %d is too large for SSC device\n", |
| bits); |
| return -EINVAL; |
| } |
| |
| fslen_ext = (bits - 1) / 16; |
| fslen = (bits - 1) % 16; |
| |
| rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
| | SSC_BF(RCMR_STTDLY, START_DELAY) |
| | SSC_BF(RCMR_START, SSC_START_FALLING_RF) |
| | SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
| | SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(RCMR_CKS, SSC_CKS_DIV); |
| |
| rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext) |
| | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) |
| | SSC_BF(RFMR_FSLEN, fslen) |
| | SSC_BF(RFMR_DATNB, (channels - 1)) |
| | SSC_BIT(RFMR_MSBF) |
| | SSC_BF(RFMR_LOOP, 0) |
| | SSC_BF(RFMR_DATLEN, (bits - 1)); |
| |
| tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
| | SSC_BF(TCMR_STTDLY, START_DELAY) |
| | SSC_BF(TCMR_START, SSC_START_FALLING_RF) |
| | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
| | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
| | SSC_BF(TCMR_CKS, SSC_CKS_DIV); |
| |
| tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext) |
| | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(TFMR_FSDEN, 0) |
| | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) |
| | SSC_BF(TFMR_FSLEN, fslen) |
| | SSC_BF(TFMR_DATNB, (channels - 1)) |
| | SSC_BIT(TFMR_MSBF) |
| | SSC_BF(TFMR_DATDEF, 0) |
| | SSC_BF(TFMR_DATLEN, (bits - 1)); |
| break; |
| |
| case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: |
| /* |
| * I2S format, CODEC supplies BCLK and LRC clocks. |
| * |
| * The SSC transmit clock is obtained from the BCLK signal on |
| * on the TK line, and the SSC receive clock is |
| * generated from the transmit clock. |
| * |
| * For single channel data, one sample is transferred |
| * on the falling edge of the LRC clock. |
| * For two channel data, one sample is |
| * transferred on both edges of the LRC clock. |
| */ |
| start_event = ((channels == 1) |
| ? SSC_START_FALLING_RF |
| : SSC_START_EDGE_RF); |
| |
| rcmr = SSC_BF(RCMR_PERIOD, 0) |
| | SSC_BF(RCMR_STTDLY, START_DELAY) |
| | SSC_BF(RCMR_START, start_event) |
| | SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
| | SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? |
| SSC_CKS_PIN : SSC_CKS_CLOCK); |
| |
| rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) |
| | SSC_BF(RFMR_FSLEN, 0) |
| | SSC_BF(RFMR_DATNB, 0) |
| | SSC_BIT(RFMR_MSBF) |
| | SSC_BF(RFMR_LOOP, 0) |
| | SSC_BF(RFMR_DATLEN, (bits - 1)); |
| |
| tcmr = SSC_BF(TCMR_PERIOD, 0) |
| | SSC_BF(TCMR_STTDLY, START_DELAY) |
| | SSC_BF(TCMR_START, start_event) |
| | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
| | SSC_BF(TCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ? |
| SSC_CKS_CLOCK : SSC_CKS_PIN); |
| |
| tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(TFMR_FSDEN, 0) |
| | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) |
| | SSC_BF(TFMR_FSLEN, 0) |
| | SSC_BF(TFMR_DATNB, 0) |
| | SSC_BIT(TFMR_MSBF) |
| | SSC_BF(TFMR_DATDEF, 0) |
| | SSC_BF(TFMR_DATLEN, (bits - 1)); |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: |
| /* |
| * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. |
| * |
| * The SSC transmit and receive clocks are generated from the |
| * MCK divider, and the BCLK signal is output |
| * on the SSC TK line. |
| */ |
| rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
| | SSC_BF(RCMR_STTDLY, 1) |
| | SSC_BF(RCMR_START, SSC_START_RISING_RF) |
| | SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
| | SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(RCMR_CKS, SSC_CKS_DIV); |
| |
| rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) |
| | SSC_BF(RFMR_FSLEN, 0) |
| | SSC_BF(RFMR_DATNB, (channels - 1)) |
| | SSC_BIT(RFMR_MSBF) |
| | SSC_BF(RFMR_LOOP, 0) |
| | SSC_BF(RFMR_DATLEN, (bits - 1)); |
| |
| tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
| | SSC_BF(TCMR_STTDLY, 1) |
| | SSC_BF(TCMR_START, SSC_START_RISING_RF) |
| | SSC_BF(TCMR_CKI, SSC_CKI_RISING) |
| | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
| | SSC_BF(TCMR_CKS, SSC_CKS_DIV); |
| |
| tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(TFMR_FSDEN, 0) |
| | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) |
| | SSC_BF(TFMR_FSLEN, 0) |
| | SSC_BF(TFMR_DATNB, (channels - 1)) |
| | SSC_BIT(TFMR_MSBF) |
| | SSC_BF(TFMR_DATDEF, 0) |
| | SSC_BF(TFMR_DATLEN, (bits - 1)); |
| break; |
| |
| case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: |
| /* |
| * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks. |
| * |
| * The SSC transmit clock is obtained from the BCLK signal on |
| * on the TK line, and the SSC receive clock is |
| * generated from the transmit clock. |
| * |
| * Data is transferred on first BCLK after LRC pulse rising |
| * edge.If stereo, the right channel data is contiguous with |
| * the left channel data. |
| */ |
| rcmr = SSC_BF(RCMR_PERIOD, 0) |
| | SSC_BF(RCMR_STTDLY, START_DELAY) |
| | SSC_BF(RCMR_START, SSC_START_RISING_RF) |
| | SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
| | SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? |
| SSC_CKS_PIN : SSC_CKS_CLOCK); |
| |
| rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) |
| | SSC_BF(RFMR_FSLEN, 0) |
| | SSC_BF(RFMR_DATNB, (channels - 1)) |
| | SSC_BIT(RFMR_MSBF) |
| | SSC_BF(RFMR_LOOP, 0) |
| | SSC_BF(RFMR_DATLEN, (bits - 1)); |
| |
| tcmr = SSC_BF(TCMR_PERIOD, 0) |
| | SSC_BF(TCMR_STTDLY, START_DELAY) |
| | SSC_BF(TCMR_START, SSC_START_RISING_RF) |
| | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
| | SSC_BF(TCMR_CKO, SSC_CKO_NONE) |
| | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? |
| SSC_CKS_CLOCK : SSC_CKS_PIN); |
| |
| tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
| | SSC_BF(TFMR_FSDEN, 0) |
| | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) |
| | SSC_BF(TFMR_FSLEN, 0) |
| | SSC_BF(TFMR_DATNB, (channels - 1)) |
| | SSC_BIT(TFMR_MSBF) |
| | SSC_BF(TFMR_DATDEF, 0) |
| | SSC_BF(TFMR_DATLEN, (bits - 1)); |
| break; |
| |
| default: |
| printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", |
| ssc_p->daifmt); |
| return -EINVAL; |
| } |
| pr_debug("atmel_ssc_hw_params: " |
| "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", |
| rcmr, rfmr, tcmr, tfmr); |
| |
| if (!ssc_p->initialized) { |
| |
| /* Enable PMC peripheral clock for this SSC */ |
| pr_debug("atmel_ssc_dai: Starting clock\n"); |
| clk_enable(ssc_p->ssc->clk); |
| |
| /* Reset the SSC and its PDC registers */ |
| ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); |
| |
| ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); |
| |
| ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); |
| ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); |
| |
| ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, |
| ssc_p->name, ssc_p); |
| if (ret < 0) { |
| printk(KERN_WARNING |
| "atmel_ssc_dai: request_irq failure\n"); |
| pr_debug("Atmel_ssc_dai: Stoping clock\n"); |
| clk_disable(ssc_p->ssc->clk); |
| return ret; |
| } |
| |
| ssc_p->initialized = 1; |
| } |
| |
| /* set SSC clock mode register */ |
| ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); |
| |
| /* set receive clock mode and format */ |
| ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); |
| ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); |
| |
| /* set transmit clock mode and format */ |
| ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); |
| ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); |
| |
| pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); |
| return 0; |
| } |
| |
| |
| static int atmel_ssc_prepare(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; |
| struct atmel_pcm_dma_params *dma_params; |
| int dir; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dir = 0; |
| else |
| dir = 1; |
| |
| dma_params = ssc_p->dma_params[dir]; |
| |
| ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); |
| ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); |
| |
| pr_debug("%s enabled SSC_SR=0x%08x\n", |
| dir ? "receive" : "transmit", |
| ssc_readl(ssc_p->ssc->regs, SR)); |
| return 0; |
| } |
| |
| static int atmel_ssc_trigger(struct snd_pcm_substream *substream, |
| int cmd, struct snd_soc_dai *dai) |
| { |
| struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; |
| struct atmel_pcm_dma_params *dma_params; |
| int dir; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| dir = 0; |
| else |
| dir = 1; |
| |
| dma_params = ssc_p->dma_params[dir]; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); |
| break; |
| default: |
| ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) |
| { |
| struct atmel_ssc_info *ssc_p; |
| |
| if (!cpu_dai->active) |
| return 0; |
| |
| ssc_p = &ssc_info[cpu_dai->id]; |
| |
| /* Save the status register before disabling transmit and receive */ |
| ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); |
| ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); |
| |
| /* Save the current interrupt mask, then disable unmasked interrupts */ |
| ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); |
| ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); |
| |
| ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); |
| ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); |
| ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); |
| ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); |
| ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); |
| |
| return 0; |
| } |
| |
| |
| |
| static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) |
| { |
| struct atmel_ssc_info *ssc_p; |
| u32 cr; |
| |
| if (!cpu_dai->active) |
| return 0; |
| |
| ssc_p = &ssc_info[cpu_dai->id]; |
| |
| /* restore SSC register settings */ |
| ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); |
| ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); |
| ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); |
| ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); |
| ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); |
| |
| /* re-enable interrupts */ |
| ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); |
| |
| /* Re-enable receive and transmit as appropriate */ |
| cr = 0; |
| cr |= |
| (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; |
| cr |= |
| (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; |
| ssc_writel(ssc_p->ssc->regs, CR, cr); |
| |
| return 0; |
| } |
| #else /* CONFIG_PM */ |
| # define atmel_ssc_suspend NULL |
| # define atmel_ssc_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| #define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) |
| |
| #define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { |
| .startup = atmel_ssc_startup, |
| .shutdown = atmel_ssc_shutdown, |
| .prepare = atmel_ssc_prepare, |
| .trigger = atmel_ssc_trigger, |
| .hw_params = atmel_ssc_hw_params, |
| .set_fmt = atmel_ssc_set_dai_fmt, |
| .set_clkdiv = atmel_ssc_set_dai_clkdiv, |
| }; |
| |
| static struct snd_soc_dai_driver atmel_ssc_dai = { |
| .suspend = atmel_ssc_suspend, |
| .resume = atmel_ssc_resume, |
| .playback = { |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = ATMEL_SSC_RATES, |
| .formats = ATMEL_SSC_FORMATS,}, |
| .capture = { |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = ATMEL_SSC_RATES, |
| .formats = ATMEL_SSC_FORMATS,}, |
| .ops = &atmel_ssc_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver atmel_ssc_component = { |
| .name = "atmel-ssc", |
| }; |
| |
| static int asoc_ssc_init(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ssc_device *ssc = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = snd_soc_register_component(dev, &atmel_ssc_component, |
| &atmel_ssc_dai, 1); |
| if (ret) { |
| dev_err(dev, "Could not register DAI: %d\n", ret); |
| goto err; |
| } |
| |
| if (ssc->pdata->use_dma) |
| ret = atmel_pcm_dma_platform_register(dev); |
| else |
| ret = atmel_pcm_pdc_platform_register(dev); |
| |
| if (ret) { |
| dev_err(dev, "Could not register PCM: %d\n", ret); |
| goto err_unregister_dai; |
| } |
| |
| return 0; |
| |
| err_unregister_dai: |
| snd_soc_unregister_component(dev); |
| err: |
| return ret; |
| } |
| |
| static void asoc_ssc_exit(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct ssc_device *ssc = platform_get_drvdata(pdev); |
| |
| if (ssc->pdata->use_dma) |
| atmel_pcm_dma_platform_unregister(dev); |
| else |
| atmel_pcm_pdc_platform_unregister(dev); |
| |
| snd_soc_unregister_component(dev); |
| } |
| |
| /** |
| * atmel_ssc_set_audio - Allocate the specified SSC for audio use. |
| */ |
| int atmel_ssc_set_audio(int ssc_id) |
| { |
| struct ssc_device *ssc; |
| int ret; |
| |
| /* If we can grab the SSC briefly to parent the DAI device off it */ |
| ssc = ssc_request(ssc_id); |
| if (IS_ERR(ssc)) { |
| pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n", |
| PTR_ERR(ssc)); |
| return PTR_ERR(ssc); |
| } else { |
| ssc_info[ssc_id].ssc = ssc; |
| } |
| |
| ret = asoc_ssc_init(&ssc->pdev->dev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(atmel_ssc_set_audio); |
| |
| void atmel_ssc_put_audio(int ssc_id) |
| { |
| struct ssc_device *ssc = ssc_info[ssc_id].ssc; |
| |
| asoc_ssc_exit(&ssc->pdev->dev); |
| ssc_free(ssc); |
| } |
| EXPORT_SYMBOL_GPL(atmel_ssc_put_audio); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); |
| MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); |
| MODULE_LICENSE("GPL"); |