| /* |
| * Copyright © 2011-2012 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Ben Widawsky <ben@bwidawsk.net> |
| * |
| */ |
| |
| /* |
| * This file implements HW context support. On gen5+ a HW context consists of an |
| * opaque GPU object which is referenced at times of context saves and restores. |
| * With RC6 enabled, the context is also referenced as the GPU enters and exists |
| * from RC6 (GPU has it's own internal power context, except on gen5). Though |
| * something like a context does exist for the media ring, the code only |
| * supports contexts for the render ring. |
| * |
| * In software, there is a distinction between contexts created by the user, |
| * and the default HW context. The default HW context is used by GPU clients |
| * that do not request setup of their own hardware context. The default |
| * context's state is never restored to help prevent programming errors. This |
| * would happen if a client ran and piggy-backed off another clients GPU state. |
| * The default context only exists to give the GPU some offset to load as the |
| * current to invoke a save of the context we actually care about. In fact, the |
| * code could likely be constructed, albeit in a more complicated fashion, to |
| * never use the default context, though that limits the driver's ability to |
| * swap out, and/or destroy other contexts. |
| * |
| * All other contexts are created as a request by the GPU client. These contexts |
| * store GPU state, and thus allow GPU clients to not re-emit state (and |
| * potentially query certain state) at any time. The kernel driver makes |
| * certain that the appropriate commands are inserted. |
| * |
| * The context life cycle is semi-complicated in that context BOs may live |
| * longer than the context itself because of the way the hardware, and object |
| * tracking works. Below is a very crude representation of the state machine |
| * describing the context life. |
| * refcount pincount active |
| * S0: initial state 0 0 0 |
| * S1: context created 1 0 0 |
| * S2: context is currently running 2 1 X |
| * S3: GPU referenced, but not current 2 0 1 |
| * S4: context is current, but destroyed 1 1 0 |
| * S5: like S3, but destroyed 1 0 1 |
| * |
| * The most common (but not all) transitions: |
| * S0->S1: client creates a context |
| * S1->S2: client submits execbuf with context |
| * S2->S3: other clients submits execbuf with context |
| * S3->S1: context object was retired |
| * S3->S2: clients submits another execbuf |
| * S2->S4: context destroy called with current context |
| * S3->S5->S0: destroy path |
| * S4->S5->S0: destroy path on current context |
| * |
| * There are two confusing terms used above: |
| * The "current context" means the context which is currently running on the |
| * GPU. The GPU has loaded its state already and has stored away the gtt |
| * offset of the BO. The GPU is not actively referencing the data at this |
| * offset, but it will on the next context switch. The only way to avoid this |
| * is to do a GPU reset. |
| * |
| * An "active context' is one which was previously the "current context" and is |
| * on the active list waiting for the next context switch to occur. Until this |
| * happens, the object must remain at the same gtt offset. It is therefore |
| * possible to destroy a context, but it is still active. |
| * |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/i915_drm.h> |
| #include "i915_drv.h" |
| #include "i915_trace.h" |
| |
| /* This is a HW constraint. The value below is the largest known requirement |
| * I've seen in a spec to date, and that was a workaround for a non-shipping |
| * part. It should be safe to decrease this, but it's more future proof as is. |
| */ |
| #define GEN6_CONTEXT_ALIGN (64<<10) |
| #define GEN7_CONTEXT_ALIGN 4096 |
| |
| static size_t get_context_alignment(struct drm_device *dev) |
| { |
| if (IS_GEN6(dev)) |
| return GEN6_CONTEXT_ALIGN; |
| |
| return GEN7_CONTEXT_ALIGN; |
| } |
| |
| static int get_context_size(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int ret; |
| u32 reg; |
| |
| switch (INTEL_INFO(dev)->gen) { |
| case 6: |
| reg = I915_READ(CXT_SIZE); |
| ret = GEN6_CXT_TOTAL_SIZE(reg) * 64; |
| break; |
| case 7: |
| reg = I915_READ(GEN7_CXT_SIZE); |
| if (IS_HASWELL(dev)) |
| ret = HSW_CXT_TOTAL_SIZE; |
| else |
| ret = GEN7_CXT_TOTAL_SIZE(reg) * 64; |
| break; |
| case 8: |
| ret = GEN8_CXT_TOTAL_SIZE; |
| break; |
| default: |
| BUG(); |
| } |
| |
| return ret; |
| } |
| |
| void i915_gem_context_free(struct kref *ctx_ref) |
| { |
| struct intel_context *ctx = container_of(ctx_ref, typeof(*ctx), ref); |
| |
| trace_i915_context_free(ctx); |
| |
| if (i915.enable_execlists) |
| intel_lr_context_free(ctx); |
| |
| i915_ppgtt_put(ctx->ppgtt); |
| |
| if (ctx->legacy_hw_ctx.rcs_state) |
| drm_gem_object_unreference(&ctx->legacy_hw_ctx.rcs_state->base); |
| list_del(&ctx->link); |
| kfree(ctx); |
| } |
| |
| struct drm_i915_gem_object * |
| i915_gem_alloc_context_obj(struct drm_device *dev, size_t size) |
| { |
| struct drm_i915_gem_object *obj; |
| int ret; |
| |
| obj = i915_gem_alloc_object(dev, size); |
| if (obj == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| /* |
| * Try to make the context utilize L3 as well as LLC. |
| * |
| * On VLV we don't have L3 controls in the PTEs so we |
| * shouldn't touch the cache level, especially as that |
| * would make the object snooped which might have a |
| * negative performance impact. |
| */ |
| if (INTEL_INFO(dev)->gen >= 7 && !IS_VALLEYVIEW(dev)) { |
| ret = i915_gem_object_set_cache_level(obj, I915_CACHE_L3_LLC); |
| /* Failure shouldn't ever happen this early */ |
| if (WARN_ON(ret)) { |
| drm_gem_object_unreference(&obj->base); |
| return ERR_PTR(ret); |
| } |
| } |
| |
| return obj; |
| } |
| |
| static struct intel_context * |
| __create_hw_context(struct drm_device *dev, |
| struct drm_i915_file_private *file_priv) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_context *ctx; |
| int ret; |
| |
| ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); |
| if (ctx == NULL) |
| return ERR_PTR(-ENOMEM); |
| |
| kref_init(&ctx->ref); |
| list_add_tail(&ctx->link, &dev_priv->context_list); |
| ctx->i915 = dev_priv; |
| |
| if (dev_priv->hw_context_size) { |
| struct drm_i915_gem_object *obj = |
| i915_gem_alloc_context_obj(dev, dev_priv->hw_context_size); |
| if (IS_ERR(obj)) { |
| ret = PTR_ERR(obj); |
| goto err_out; |
| } |
| ctx->legacy_hw_ctx.rcs_state = obj; |
| } |
| |
| /* Default context will never have a file_priv */ |
| if (file_priv != NULL) { |
| ret = idr_alloc(&file_priv->context_idr, ctx, |
| DEFAULT_CONTEXT_HANDLE, 0, GFP_KERNEL); |
| if (ret < 0) |
| goto err_out; |
| } else |
| ret = DEFAULT_CONTEXT_HANDLE; |
| |
| ctx->file_priv = file_priv; |
| ctx->user_handle = ret; |
| /* NB: Mark all slices as needing a remap so that when the context first |
| * loads it will restore whatever remap state already exists. If there |
| * is no remap info, it will be a NOP. */ |
| ctx->remap_slice = (1 << NUM_L3_SLICES(dev)) - 1; |
| |
| ctx->hang_stats.ban_period_seconds = DRM_I915_CTX_BAN_PERIOD; |
| |
| return ctx; |
| |
| err_out: |
| i915_gem_context_unreference(ctx); |
| return ERR_PTR(ret); |
| } |
| |
| /** |
| * The default context needs to exist per ring that uses contexts. It stores the |
| * context state of the GPU for applications that don't utilize HW contexts, as |
| * well as an idle case. |
| */ |
| static struct intel_context * |
| i915_gem_create_context(struct drm_device *dev, |
| struct drm_i915_file_private *file_priv) |
| { |
| const bool is_global_default_ctx = file_priv == NULL; |
| struct intel_context *ctx; |
| int ret = 0; |
| |
| BUG_ON(!mutex_is_locked(&dev->struct_mutex)); |
| |
| ctx = __create_hw_context(dev, file_priv); |
| if (IS_ERR(ctx)) |
| return ctx; |
| |
| if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state) { |
| /* We may need to do things with the shrinker which |
| * require us to immediately switch back to the default |
| * context. This can cause a problem as pinning the |
| * default context also requires GTT space which may not |
| * be available. To avoid this we always pin the default |
| * context. |
| */ |
| ret = i915_gem_obj_ggtt_pin(ctx->legacy_hw_ctx.rcs_state, |
| get_context_alignment(dev), 0); |
| if (ret) { |
| DRM_DEBUG_DRIVER("Couldn't pin %d\n", ret); |
| goto err_destroy; |
| } |
| } |
| |
| if (USES_FULL_PPGTT(dev)) { |
| struct i915_hw_ppgtt *ppgtt = i915_ppgtt_create(dev, file_priv); |
| |
| if (IS_ERR_OR_NULL(ppgtt)) { |
| DRM_DEBUG_DRIVER("PPGTT setup failed (%ld)\n", |
| PTR_ERR(ppgtt)); |
| ret = PTR_ERR(ppgtt); |
| goto err_unpin; |
| } |
| |
| ctx->ppgtt = ppgtt; |
| } |
| |
| trace_i915_context_create(ctx); |
| |
| return ctx; |
| |
| err_unpin: |
| if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state) |
| i915_gem_object_ggtt_unpin(ctx->legacy_hw_ctx.rcs_state); |
| err_destroy: |
| idr_remove(&file_priv->context_idr, ctx->user_handle); |
| i915_gem_context_unreference(ctx); |
| return ERR_PTR(ret); |
| } |
| |
| void i915_gem_context_reset(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| int i; |
| |
| if (i915.enable_execlists) { |
| struct intel_context *ctx; |
| |
| list_for_each_entry(ctx, &dev_priv->context_list, link) { |
| intel_lr_context_reset(dev, ctx); |
| } |
| |
| return; |
| } |
| |
| for (i = 0; i < I915_NUM_RINGS; i++) { |
| struct intel_engine_cs *ring = &dev_priv->ring[i]; |
| struct intel_context *lctx = ring->last_context; |
| |
| if (lctx) { |
| if (lctx->legacy_hw_ctx.rcs_state && i == RCS) |
| i915_gem_object_ggtt_unpin(lctx->legacy_hw_ctx.rcs_state); |
| |
| i915_gem_context_unreference(lctx); |
| ring->last_context = NULL; |
| } |
| } |
| } |
| |
| int i915_gem_context_init(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_context *ctx; |
| int i; |
| |
| /* Init should only be called once per module load. Eventually the |
| * restriction on the context_disabled check can be loosened. */ |
| if (WARN_ON(dev_priv->ring[RCS].default_context)) |
| return 0; |
| |
| if (i915.enable_execlists) { |
| /* NB: intentionally left blank. We will allocate our own |
| * backing objects as we need them, thank you very much */ |
| dev_priv->hw_context_size = 0; |
| } else if (HAS_HW_CONTEXTS(dev)) { |
| dev_priv->hw_context_size = round_up(get_context_size(dev), 4096); |
| if (dev_priv->hw_context_size > (1<<20)) { |
| DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size %d\n", |
| dev_priv->hw_context_size); |
| dev_priv->hw_context_size = 0; |
| } |
| } |
| |
| ctx = i915_gem_create_context(dev, NULL); |
| if (IS_ERR(ctx)) { |
| DRM_ERROR("Failed to create default global context (error %ld)\n", |
| PTR_ERR(ctx)); |
| return PTR_ERR(ctx); |
| } |
| |
| for (i = 0; i < I915_NUM_RINGS; i++) { |
| struct intel_engine_cs *ring = &dev_priv->ring[i]; |
| |
| /* NB: RCS will hold a ref for all rings */ |
| ring->default_context = ctx; |
| } |
| |
| DRM_DEBUG_DRIVER("%s context support initialized\n", |
| i915.enable_execlists ? "LR" : |
| dev_priv->hw_context_size ? "HW" : "fake"); |
| return 0; |
| } |
| |
| void i915_gem_context_fini(struct drm_device *dev) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| struct intel_context *dctx = dev_priv->ring[RCS].default_context; |
| int i; |
| |
| if (dctx->legacy_hw_ctx.rcs_state) { |
| /* The only known way to stop the gpu from accessing the hw context is |
| * to reset it. Do this as the very last operation to avoid confusing |
| * other code, leading to spurious errors. */ |
| intel_gpu_reset(dev); |
| |
| /* When default context is created and switched to, base object refcount |
| * will be 2 (+1 from object creation and +1 from do_switch()). |
| * i915_gem_context_fini() will be called after gpu_idle() has switched |
| * to default context. So we need to unreference the base object once |
| * to offset the do_switch part, so that i915_gem_context_unreference() |
| * can then free the base object correctly. */ |
| WARN_ON(!dev_priv->ring[RCS].last_context); |
| if (dev_priv->ring[RCS].last_context == dctx) { |
| /* Fake switch to NULL context */ |
| WARN_ON(dctx->legacy_hw_ctx.rcs_state->active); |
| i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state); |
| i915_gem_context_unreference(dctx); |
| dev_priv->ring[RCS].last_context = NULL; |
| } |
| |
| i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state); |
| } |
| |
| for (i = 0; i < I915_NUM_RINGS; i++) { |
| struct intel_engine_cs *ring = &dev_priv->ring[i]; |
| |
| if (ring->last_context) |
| i915_gem_context_unreference(ring->last_context); |
| |
| ring->default_context = NULL; |
| ring->last_context = NULL; |
| } |
| |
| i915_gem_context_unreference(dctx); |
| } |
| |
| int i915_gem_context_enable(struct drm_i915_gem_request *req) |
| { |
| struct intel_engine_cs *ring = req->ring; |
| int ret; |
| |
| if (i915.enable_execlists) { |
| if (ring->init_context == NULL) |
| return 0; |
| |
| ret = ring->init_context(req); |
| } else |
| ret = i915_switch_context(req); |
| |
| if (ret) { |
| DRM_ERROR("ring init context: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int context_idr_cleanup(int id, void *p, void *data) |
| { |
| struct intel_context *ctx = p; |
| |
| i915_gem_context_unreference(ctx); |
| return 0; |
| } |
| |
| int i915_gem_context_open(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| struct intel_context *ctx; |
| |
| idr_init(&file_priv->context_idr); |
| |
| mutex_lock(&dev->struct_mutex); |
| ctx = i915_gem_create_context(dev, file_priv); |
| mutex_unlock(&dev->struct_mutex); |
| |
| if (IS_ERR(ctx)) { |
| idr_destroy(&file_priv->context_idr); |
| return PTR_ERR(ctx); |
| } |
| |
| return 0; |
| } |
| |
| void i915_gem_context_close(struct drm_device *dev, struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| |
| idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL); |
| idr_destroy(&file_priv->context_idr); |
| } |
| |
| struct intel_context * |
| i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id) |
| { |
| struct intel_context *ctx; |
| |
| ctx = (struct intel_context *)idr_find(&file_priv->context_idr, id); |
| if (!ctx) |
| return ERR_PTR(-ENOENT); |
| |
| return ctx; |
| } |
| |
| static inline int |
| mi_set_context(struct drm_i915_gem_request *req, u32 hw_flags) |
| { |
| struct intel_engine_cs *ring = req->ring; |
| u32 flags = hw_flags | MI_MM_SPACE_GTT; |
| const int num_rings = |
| /* Use an extended w/a on ivb+ if signalling from other rings */ |
| i915_semaphore_is_enabled(ring->dev) ? |
| hweight32(INTEL_INFO(ring->dev)->ring_mask) - 1 : |
| 0; |
| int len, i, ret; |
| |
| /* w/a: If Flush TLB Invalidation Mode is enabled, driver must do a TLB |
| * invalidation prior to MI_SET_CONTEXT. On GEN6 we don't set the value |
| * explicitly, so we rely on the value at ring init, stored in |
| * itlb_before_ctx_switch. |
| */ |
| if (IS_GEN6(ring->dev)) { |
| ret = ring->flush(req, I915_GEM_GPU_DOMAINS, 0); |
| if (ret) |
| return ret; |
| } |
| |
| /* These flags are for resource streamer on HSW+ */ |
| if (IS_HASWELL(ring->dev) || INTEL_INFO(ring->dev)->gen >= 8) |
| flags |= (HSW_MI_RS_SAVE_STATE_EN | HSW_MI_RS_RESTORE_STATE_EN); |
| else if (INTEL_INFO(ring->dev)->gen < 8) |
| flags |= (MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN); |
| |
| |
| len = 4; |
| if (INTEL_INFO(ring->dev)->gen >= 7) |
| len += 2 + (num_rings ? 4*num_rings + 2 : 0); |
| |
| ret = intel_ring_begin(req, len); |
| if (ret) |
| return ret; |
| |
| /* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw,chv */ |
| if (INTEL_INFO(ring->dev)->gen >= 7) { |
| intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE); |
| if (num_rings) { |
| struct intel_engine_cs *signaller; |
| |
| intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings)); |
| for_each_ring(signaller, to_i915(ring->dev), i) { |
| if (signaller == ring) |
| continue; |
| |
| intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base)); |
| intel_ring_emit(ring, _MASKED_BIT_ENABLE(GEN6_PSMI_SLEEP_MSG_DISABLE)); |
| } |
| } |
| } |
| |
| intel_ring_emit(ring, MI_NOOP); |
| intel_ring_emit(ring, MI_SET_CONTEXT); |
| intel_ring_emit(ring, i915_gem_obj_ggtt_offset(req->ctx->legacy_hw_ctx.rcs_state) | |
| flags); |
| /* |
| * w/a: MI_SET_CONTEXT must always be followed by MI_NOOP |
| * WaMiSetContext_Hang:snb,ivb,vlv |
| */ |
| intel_ring_emit(ring, MI_NOOP); |
| |
| if (INTEL_INFO(ring->dev)->gen >= 7) { |
| if (num_rings) { |
| struct intel_engine_cs *signaller; |
| |
| intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings)); |
| for_each_ring(signaller, to_i915(ring->dev), i) { |
| if (signaller == ring) |
| continue; |
| |
| intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base)); |
| intel_ring_emit(ring, _MASKED_BIT_DISABLE(GEN6_PSMI_SLEEP_MSG_DISABLE)); |
| } |
| } |
| intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE); |
| } |
| |
| intel_ring_advance(ring); |
| |
| return ret; |
| } |
| |
| static inline bool should_skip_switch(struct intel_engine_cs *ring, |
| struct intel_context *from, |
| struct intel_context *to) |
| { |
| if (to->remap_slice) |
| return false; |
| |
| if (to->ppgtt && from == to && |
| !(intel_ring_flag(ring) & to->ppgtt->pd_dirty_rings)) |
| return true; |
| |
| return false; |
| } |
| |
| static bool |
| needs_pd_load_pre(struct intel_engine_cs *ring, struct intel_context *to) |
| { |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; |
| |
| if (!to->ppgtt) |
| return false; |
| |
| if (INTEL_INFO(ring->dev)->gen < 8) |
| return true; |
| |
| if (ring != &dev_priv->ring[RCS]) |
| return true; |
| |
| return false; |
| } |
| |
| static bool |
| needs_pd_load_post(struct intel_engine_cs *ring, struct intel_context *to, |
| u32 hw_flags) |
| { |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; |
| |
| if (!to->ppgtt) |
| return false; |
| |
| if (!IS_GEN8(ring->dev)) |
| return false; |
| |
| if (ring != &dev_priv->ring[RCS]) |
| return false; |
| |
| if (hw_flags & MI_RESTORE_INHIBIT) |
| return true; |
| |
| return false; |
| } |
| |
| static int do_switch(struct drm_i915_gem_request *req) |
| { |
| struct intel_context *to = req->ctx; |
| struct intel_engine_cs *ring = req->ring; |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; |
| struct intel_context *from = ring->last_context; |
| u32 hw_flags = 0; |
| bool uninitialized = false; |
| int ret, i; |
| |
| if (from != NULL && ring == &dev_priv->ring[RCS]) { |
| BUG_ON(from->legacy_hw_ctx.rcs_state == NULL); |
| BUG_ON(!i915_gem_obj_is_pinned(from->legacy_hw_ctx.rcs_state)); |
| } |
| |
| if (should_skip_switch(ring, from, to)) |
| return 0; |
| |
| /* Trying to pin first makes error handling easier. */ |
| if (ring == &dev_priv->ring[RCS]) { |
| ret = i915_gem_obj_ggtt_pin(to->legacy_hw_ctx.rcs_state, |
| get_context_alignment(ring->dev), 0); |
| if (ret) |
| return ret; |
| } |
| |
| /* |
| * Pin can switch back to the default context if we end up calling into |
| * evict_everything - as a last ditch gtt defrag effort that also |
| * switches to the default context. Hence we need to reload from here. |
| */ |
| from = ring->last_context; |
| |
| if (needs_pd_load_pre(ring, to)) { |
| /* Older GENs and non render rings still want the load first, |
| * "PP_DCLV followed by PP_DIR_BASE register through Load |
| * Register Immediate commands in Ring Buffer before submitting |
| * a context."*/ |
| trace_switch_mm(ring, to); |
| ret = to->ppgtt->switch_mm(to->ppgtt, req); |
| if (ret) |
| goto unpin_out; |
| |
| /* Doing a PD load always reloads the page dirs */ |
| to->ppgtt->pd_dirty_rings &= ~intel_ring_flag(ring); |
| } |
| |
| if (ring != &dev_priv->ring[RCS]) { |
| if (from) |
| i915_gem_context_unreference(from); |
| goto done; |
| } |
| |
| /* |
| * Clear this page out of any CPU caches for coherent swap-in/out. Note |
| * that thanks to write = false in this call and us not setting any gpu |
| * write domains when putting a context object onto the active list |
| * (when switching away from it), this won't block. |
| * |
| * XXX: We need a real interface to do this instead of trickery. |
| */ |
| ret = i915_gem_object_set_to_gtt_domain(to->legacy_hw_ctx.rcs_state, false); |
| if (ret) |
| goto unpin_out; |
| |
| if (!to->legacy_hw_ctx.initialized) { |
| hw_flags |= MI_RESTORE_INHIBIT; |
| /* NB: If we inhibit the restore, the context is not allowed to |
| * die because future work may end up depending on valid address |
| * space. This means we must enforce that a page table load |
| * occur when this occurs. */ |
| } else if (to->ppgtt && |
| (intel_ring_flag(ring) & to->ppgtt->pd_dirty_rings)) { |
| hw_flags |= MI_FORCE_RESTORE; |
| to->ppgtt->pd_dirty_rings &= ~intel_ring_flag(ring); |
| } |
| |
| /* We should never emit switch_mm more than once */ |
| WARN_ON(needs_pd_load_pre(ring, to) && |
| needs_pd_load_post(ring, to, hw_flags)); |
| |
| ret = mi_set_context(req, hw_flags); |
| if (ret) |
| goto unpin_out; |
| |
| /* GEN8 does *not* require an explicit reload if the PDPs have been |
| * setup, and we do not wish to move them. |
| */ |
| if (needs_pd_load_post(ring, to, hw_flags)) { |
| trace_switch_mm(ring, to); |
| ret = to->ppgtt->switch_mm(to->ppgtt, req); |
| /* The hardware context switch is emitted, but we haven't |
| * actually changed the state - so it's probably safe to bail |
| * here. Still, let the user know something dangerous has |
| * happened. |
| */ |
| if (ret) { |
| DRM_ERROR("Failed to change address space on context switch\n"); |
| goto unpin_out; |
| } |
| } |
| |
| for (i = 0; i < MAX_L3_SLICES; i++) { |
| if (!(to->remap_slice & (1<<i))) |
| continue; |
| |
| ret = i915_gem_l3_remap(req, i); |
| /* If it failed, try again next round */ |
| if (ret) |
| DRM_DEBUG_DRIVER("L3 remapping failed\n"); |
| else |
| to->remap_slice &= ~(1<<i); |
| } |
| |
| /* The backing object for the context is done after switching to the |
| * *next* context. Therefore we cannot retire the previous context until |
| * the next context has already started running. In fact, the below code |
| * is a bit suboptimal because the retiring can occur simply after the |
| * MI_SET_CONTEXT instead of when the next seqno has completed. |
| */ |
| if (from != NULL) { |
| from->legacy_hw_ctx.rcs_state->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION; |
| i915_vma_move_to_active(i915_gem_obj_to_ggtt(from->legacy_hw_ctx.rcs_state), req); |
| /* As long as MI_SET_CONTEXT is serializing, ie. it flushes the |
| * whole damn pipeline, we don't need to explicitly mark the |
| * object dirty. The only exception is that the context must be |
| * correct in case the object gets swapped out. Ideally we'd be |
| * able to defer doing this until we know the object would be |
| * swapped, but there is no way to do that yet. |
| */ |
| from->legacy_hw_ctx.rcs_state->dirty = 1; |
| |
| /* obj is kept alive until the next request by its active ref */ |
| i915_gem_object_ggtt_unpin(from->legacy_hw_ctx.rcs_state); |
| i915_gem_context_unreference(from); |
| } |
| |
| uninitialized = !to->legacy_hw_ctx.initialized; |
| to->legacy_hw_ctx.initialized = true; |
| |
| done: |
| i915_gem_context_reference(to); |
| ring->last_context = to; |
| |
| if (uninitialized) { |
| if (ring->init_context) { |
| ret = ring->init_context(req); |
| if (ret) |
| DRM_ERROR("ring init context: %d\n", ret); |
| } |
| } |
| |
| return 0; |
| |
| unpin_out: |
| if (ring->id == RCS) |
| i915_gem_object_ggtt_unpin(to->legacy_hw_ctx.rcs_state); |
| return ret; |
| } |
| |
| /** |
| * i915_switch_context() - perform a GPU context switch. |
| * @req: request for which we'll execute the context switch |
| * |
| * The context life cycle is simple. The context refcount is incremented and |
| * decremented by 1 and create and destroy. If the context is in use by the GPU, |
| * it will have a refcount > 1. This allows us to destroy the context abstract |
| * object while letting the normal object tracking destroy the backing BO. |
| * |
| * This function should not be used in execlists mode. Instead the context is |
| * switched by writing to the ELSP and requests keep a reference to their |
| * context. |
| */ |
| int i915_switch_context(struct drm_i915_gem_request *req) |
| { |
| struct intel_engine_cs *ring = req->ring; |
| struct drm_i915_private *dev_priv = ring->dev->dev_private; |
| |
| WARN_ON(i915.enable_execlists); |
| WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); |
| |
| if (req->ctx->legacy_hw_ctx.rcs_state == NULL) { /* We have the fake context */ |
| if (req->ctx != ring->last_context) { |
| i915_gem_context_reference(req->ctx); |
| if (ring->last_context) |
| i915_gem_context_unreference(ring->last_context); |
| ring->last_context = req->ctx; |
| } |
| return 0; |
| } |
| |
| return do_switch(req); |
| } |
| |
| static bool contexts_enabled(struct drm_device *dev) |
| { |
| return i915.enable_execlists || to_i915(dev)->hw_context_size; |
| } |
| |
| int i915_gem_context_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_context_create *args = data; |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| struct intel_context *ctx; |
| int ret; |
| |
| if (!contexts_enabled(dev)) |
| return -ENODEV; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| ctx = i915_gem_create_context(dev, file_priv); |
| mutex_unlock(&dev->struct_mutex); |
| if (IS_ERR(ctx)) |
| return PTR_ERR(ctx); |
| |
| args->ctx_id = ctx->user_handle; |
| DRM_DEBUG_DRIVER("HW context %d created\n", args->ctx_id); |
| |
| return 0; |
| } |
| |
| int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_gem_context_destroy *args = data; |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| struct intel_context *ctx; |
| int ret; |
| |
| if (args->ctx_id == DEFAULT_CONTEXT_HANDLE) |
| return -ENOENT; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| ctx = i915_gem_context_get(file_priv, args->ctx_id); |
| if (IS_ERR(ctx)) { |
| mutex_unlock(&dev->struct_mutex); |
| return PTR_ERR(ctx); |
| } |
| |
| idr_remove(&ctx->file_priv->context_idr, ctx->user_handle); |
| i915_gem_context_unreference(ctx); |
| mutex_unlock(&dev->struct_mutex); |
| |
| DRM_DEBUG_DRIVER("HW context %d destroyed\n", args->ctx_id); |
| return 0; |
| } |
| |
| int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| struct drm_i915_gem_context_param *args = data; |
| struct intel_context *ctx; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| ctx = i915_gem_context_get(file_priv, args->ctx_id); |
| if (IS_ERR(ctx)) { |
| mutex_unlock(&dev->struct_mutex); |
| return PTR_ERR(ctx); |
| } |
| |
| args->size = 0; |
| switch (args->param) { |
| case I915_CONTEXT_PARAM_BAN_PERIOD: |
| args->value = ctx->hang_stats.ban_period_seconds; |
| break; |
| case I915_CONTEXT_PARAM_NO_ZEROMAP: |
| args->value = ctx->flags & CONTEXT_NO_ZEROMAP; |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |
| |
| int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file) |
| { |
| struct drm_i915_file_private *file_priv = file->driver_priv; |
| struct drm_i915_gem_context_param *args = data; |
| struct intel_context *ctx; |
| int ret; |
| |
| ret = i915_mutex_lock_interruptible(dev); |
| if (ret) |
| return ret; |
| |
| ctx = i915_gem_context_get(file_priv, args->ctx_id); |
| if (IS_ERR(ctx)) { |
| mutex_unlock(&dev->struct_mutex); |
| return PTR_ERR(ctx); |
| } |
| |
| switch (args->param) { |
| case I915_CONTEXT_PARAM_BAN_PERIOD: |
| if (args->size) |
| ret = -EINVAL; |
| else if (args->value < ctx->hang_stats.ban_period_seconds && |
| !capable(CAP_SYS_ADMIN)) |
| ret = -EPERM; |
| else |
| ctx->hang_stats.ban_period_seconds = args->value; |
| break; |
| case I915_CONTEXT_PARAM_NO_ZEROMAP: |
| if (args->size) { |
| ret = -EINVAL; |
| } else { |
| ctx->flags &= ~CONTEXT_NO_ZEROMAP; |
| ctx->flags |= args->value ? CONTEXT_NO_ZEROMAP : 0; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&dev->struct_mutex); |
| |
| return ret; |
| } |