| /* |
| * max77686.c - Regulator driver for the Maxim 77686 |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * Chiwoong Byun <woong.byun@smasung.com> |
| * Jonghwa Lee <jonghwa3.lee@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * This driver is based on max8997.c |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/bug.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/mfd/max77686.h> |
| #include <linux/mfd/max77686-private.h> |
| |
| #define MAX77686_LDO_MINUV 800000 |
| #define MAX77686_LDO_UVSTEP 50000 |
| #define MAX77686_LDO_LOW_MINUV 800000 |
| #define MAX77686_LDO_LOW_UVSTEP 25000 |
| #define MAX77686_BUCK_MINUV 750000 |
| #define MAX77686_BUCK_UVSTEP 50000 |
| #define MAX77686_RAMP_DELAY 100000 /* uV/us */ |
| #define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */ |
| #define MAX77686_DVS_MINUV 600000 |
| #define MAX77686_DVS_UVSTEP 12500 |
| |
| #define MAX77686_OPMODE_SHIFT 6 |
| #define MAX77686_OPMODE_BUCK234_SHIFT 4 |
| #define MAX77686_OPMODE_MASK 0x3 |
| |
| #define MAX77686_VSEL_MASK 0x3F |
| #define MAX77686_DVS_VSEL_MASK 0xFF |
| |
| #define MAX77686_RAMP_RATE_MASK 0xC0 |
| |
| #define MAX77686_REGULATORS MAX77686_REG_MAX |
| #define MAX77686_LDOS 26 |
| |
| enum max77686_ramp_rate { |
| RAMP_RATE_13P75MV, |
| RAMP_RATE_27P5MV, |
| RAMP_RATE_55MV, |
| RAMP_RATE_NO_CTRL, /* 100mV/us */ |
| }; |
| |
| struct max77686_data { |
| struct regulator_dev *rdev[MAX77686_REGULATORS]; |
| unsigned int opmode[MAX77686_REGULATORS]; |
| }; |
| |
| /* Some BUCKS supports Normal[ON/OFF] mode during suspend */ |
| static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev) |
| { |
| unsigned int val; |
| struct max77686_data *max77686 = rdev_get_drvdata(rdev); |
| |
| if (rdev->desc->id == MAX77686_BUCK1) |
| val = 0x1; |
| else |
| val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT; |
| |
| max77686->opmode[rdev->desc->id] = val; |
| return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| rdev->desc->enable_mask, |
| val); |
| } |
| |
| /* Some LDOs supports [LPM/Normal]ON mode during suspend state */ |
| static int max77686_set_suspend_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| struct max77686_data *max77686 = rdev_get_drvdata(rdev); |
| unsigned int val; |
| |
| /* BUCK[5-9] doesn't support this feature */ |
| if (rdev->desc->id >= MAX77686_BUCK5) |
| return 0; |
| |
| switch (mode) { |
| case REGULATOR_MODE_IDLE: /* ON in LP Mode */ |
| val = 0x2 << MAX77686_OPMODE_SHIFT; |
| break; |
| case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ |
| val = 0x3 << MAX77686_OPMODE_SHIFT; |
| break; |
| default: |
| pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", |
| rdev->desc->name, mode); |
| return -EINVAL; |
| } |
| |
| max77686->opmode[rdev->desc->id] = val; |
| return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| rdev->desc->enable_mask, |
| val); |
| } |
| |
| /* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */ |
| static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, |
| unsigned int mode) |
| { |
| unsigned int val; |
| struct max77686_data *max77686 = rdev_get_drvdata(rdev); |
| |
| switch (mode) { |
| case REGULATOR_MODE_STANDBY: /* switch off */ |
| val = 0x1 << MAX77686_OPMODE_SHIFT; |
| break; |
| case REGULATOR_MODE_IDLE: /* ON in LP Mode */ |
| val = 0x2 << MAX77686_OPMODE_SHIFT; |
| break; |
| case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ |
| val = 0x3 << MAX77686_OPMODE_SHIFT; |
| break; |
| default: |
| pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", |
| rdev->desc->name, mode); |
| return -EINVAL; |
| } |
| |
| max77686->opmode[rdev->desc->id] = val; |
| return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| rdev->desc->enable_mask, |
| val); |
| } |
| |
| static int max77686_enable(struct regulator_dev *rdev) |
| { |
| struct max77686_data *max77686 = rdev_get_drvdata(rdev); |
| |
| return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| rdev->desc->enable_mask, |
| max77686->opmode[rdev->desc->id]); |
| } |
| |
| static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) |
| { |
| unsigned int ramp_value = RAMP_RATE_NO_CTRL; |
| |
| switch (ramp_delay) { |
| case 1 ... 13750: |
| ramp_value = RAMP_RATE_13P75MV; |
| break; |
| case 13751 ... 27500: |
| ramp_value = RAMP_RATE_27P5MV; |
| break; |
| case 27501 ... 55000: |
| ramp_value = RAMP_RATE_55MV; |
| break; |
| case 55001 ... 100000: |
| break; |
| default: |
| pr_warn("%s: ramp_delay: %d not supported, setting 100000\n", |
| rdev->desc->name, ramp_delay); |
| } |
| |
| return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, |
| MAX77686_RAMP_RATE_MASK, ramp_value << 6); |
| } |
| |
| static struct regulator_ops max77686_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = max77686_enable, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_suspend_mode = max77686_set_suspend_mode, |
| }; |
| |
| static struct regulator_ops max77686_ldo_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = max77686_enable, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_suspend_mode = max77686_ldo_set_suspend_mode, |
| }; |
| |
| static struct regulator_ops max77686_buck1_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = max77686_enable, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_suspend_disable = max77686_buck_set_suspend_disable, |
| }; |
| |
| static struct regulator_ops max77686_buck_dvs_ops = { |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = max77686_enable, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_voltage_time_sel = regulator_set_voltage_time_sel, |
| .set_ramp_delay = max77686_set_ramp_delay, |
| .set_suspend_disable = max77686_buck_set_suspend_disable, |
| }; |
| |
| #define regulator_desc_ldo(num) { \ |
| .name = "LDO"#num, \ |
| .id = MAX77686_LDO##num, \ |
| .ops = &max77686_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_LDO_MINUV, \ |
| .uV_step = MAX77686_LDO_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .enable_mask = MAX77686_OPMODE_MASK \ |
| << MAX77686_OPMODE_SHIFT, \ |
| } |
| #define regulator_desc_lpm_ldo(num) { \ |
| .name = "LDO"#num, \ |
| .id = MAX77686_LDO##num, \ |
| .ops = &max77686_ldo_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_LDO_MINUV, \ |
| .uV_step = MAX77686_LDO_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .enable_mask = MAX77686_OPMODE_MASK \ |
| << MAX77686_OPMODE_SHIFT, \ |
| } |
| #define regulator_desc_ldo_low(num) { \ |
| .name = "LDO"#num, \ |
| .id = MAX77686_LDO##num, \ |
| .ops = &max77686_ldo_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_LDO_LOW_MINUV, \ |
| .uV_step = MAX77686_LDO_LOW_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .enable_mask = MAX77686_OPMODE_MASK \ |
| << MAX77686_OPMODE_SHIFT, \ |
| } |
| #define regulator_desc_ldo1_low(num) { \ |
| .name = "LDO"#num, \ |
| .id = MAX77686_LDO##num, \ |
| .ops = &max77686_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_LDO_LOW_MINUV, \ |
| .uV_step = MAX77686_LDO_LOW_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ |
| .enable_mask = MAX77686_OPMODE_MASK \ |
| << MAX77686_OPMODE_SHIFT, \ |
| } |
| #define regulator_desc_buck(num) { \ |
| .name = "BUCK"#num, \ |
| .id = MAX77686_BUCK##num, \ |
| .ops = &max77686_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_BUCK_MINUV, \ |
| .uV_step = MAX77686_BUCK_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \ |
| .enable_mask = MAX77686_OPMODE_MASK, \ |
| } |
| #define regulator_desc_buck1(num) { \ |
| .name = "BUCK"#num, \ |
| .id = MAX77686_BUCK##num, \ |
| .ops = &max77686_buck1_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_BUCK_MINUV, \ |
| .uV_step = MAX77686_BUCK_UVSTEP, \ |
| .ramp_delay = MAX77686_RAMP_DELAY, \ |
| .n_voltages = MAX77686_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_BUCK1OUT, \ |
| .vsel_mask = MAX77686_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_BUCK1CTRL, \ |
| .enable_mask = MAX77686_OPMODE_MASK, \ |
| } |
| #define regulator_desc_buck_dvs(num) { \ |
| .name = "BUCK"#num, \ |
| .id = MAX77686_BUCK##num, \ |
| .ops = &max77686_buck_dvs_ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .min_uV = MAX77686_DVS_MINUV, \ |
| .uV_step = MAX77686_DVS_UVSTEP, \ |
| .ramp_delay = MAX77686_DVS_RAMP_DELAY, \ |
| .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \ |
| .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ |
| .vsel_mask = MAX77686_DVS_VSEL_MASK, \ |
| .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ |
| .enable_mask = MAX77686_OPMODE_MASK \ |
| << MAX77686_OPMODE_BUCK234_SHIFT, \ |
| } |
| |
| static struct regulator_desc regulators[] = { |
| regulator_desc_ldo1_low(1), |
| regulator_desc_ldo_low(2), |
| regulator_desc_ldo(3), |
| regulator_desc_ldo(4), |
| regulator_desc_ldo(5), |
| regulator_desc_ldo_low(6), |
| regulator_desc_ldo_low(7), |
| regulator_desc_ldo_low(8), |
| regulator_desc_ldo(9), |
| regulator_desc_lpm_ldo(10), |
| regulator_desc_lpm_ldo(11), |
| regulator_desc_lpm_ldo(12), |
| regulator_desc_ldo(13), |
| regulator_desc_lpm_ldo(14), |
| regulator_desc_ldo_low(15), |
| regulator_desc_lpm_ldo(16), |
| regulator_desc_ldo(17), |
| regulator_desc_ldo(18), |
| regulator_desc_ldo(19), |
| regulator_desc_ldo(20), |
| regulator_desc_ldo(21), |
| regulator_desc_ldo(22), |
| regulator_desc_ldo(23), |
| regulator_desc_ldo(24), |
| regulator_desc_ldo(25), |
| regulator_desc_ldo(26), |
| regulator_desc_buck1(1), |
| regulator_desc_buck_dvs(2), |
| regulator_desc_buck_dvs(3), |
| regulator_desc_buck_dvs(4), |
| regulator_desc_buck(5), |
| regulator_desc_buck(6), |
| regulator_desc_buck(7), |
| regulator_desc_buck(8), |
| regulator_desc_buck(9), |
| }; |
| |
| #ifdef CONFIG_OF |
| static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, |
| struct max77686_platform_data *pdata) |
| { |
| struct device_node *pmic_np, *regulators_np; |
| struct max77686_regulator_data *rdata; |
| struct of_regulator_match rmatch; |
| unsigned int i; |
| |
| pmic_np = iodev->dev->of_node; |
| regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators"); |
| if (!regulators_np) { |
| dev_err(iodev->dev, "could not find regulators sub-node\n"); |
| return -EINVAL; |
| } |
| |
| pdata->num_regulators = ARRAY_SIZE(regulators); |
| rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * |
| pdata->num_regulators, GFP_KERNEL); |
| if (!rdata) { |
| dev_err(iodev->dev, |
| "could not allocate memory for regulator data\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < pdata->num_regulators; i++) { |
| rmatch.name = regulators[i].name; |
| rmatch.init_data = NULL; |
| rmatch.of_node = NULL; |
| of_regulator_match(iodev->dev, regulators_np, &rmatch, 1); |
| rdata[i].initdata = rmatch.init_data; |
| rdata[i].of_node = rmatch.of_node; |
| } |
| |
| pdata->regulators = rdata; |
| |
| return 0; |
| } |
| #else |
| static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, |
| struct max77686_platform_data *pdata) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int max77686_pmic_probe(struct platform_device *pdev) |
| { |
| struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); |
| struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); |
| struct max77686_data *max77686; |
| int i, ret = 0; |
| struct regulator_config config = { }; |
| |
| dev_dbg(&pdev->dev, "%s\n", __func__); |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data found for regulator\n"); |
| return -ENODEV; |
| } |
| |
| if (iodev->dev->of_node) { |
| ret = max77686_pmic_dt_parse_pdata(iodev, pdata); |
| if (ret) |
| return ret; |
| } |
| |
| if (pdata->num_regulators != MAX77686_REGULATORS) { |
| dev_err(&pdev->dev, |
| "Invalid initial data for regulator's initialiation\n"); |
| return -EINVAL; |
| } |
| |
| max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), |
| GFP_KERNEL); |
| if (!max77686) |
| return -ENOMEM; |
| |
| config.dev = &pdev->dev; |
| config.regmap = iodev->regmap; |
| config.driver_data = max77686; |
| platform_set_drvdata(pdev, max77686); |
| |
| for (i = 0; i < MAX77686_REGULATORS; i++) { |
| config.init_data = pdata->regulators[i].initdata; |
| config.of_node = pdata->regulators[i].of_node; |
| |
| max77686->opmode[i] = regulators[i].enable_mask; |
| max77686->rdev[i] = regulator_register(®ulators[i], &config); |
| if (IS_ERR(max77686->rdev[i])) { |
| ret = PTR_ERR(max77686->rdev[i]); |
| dev_err(&pdev->dev, |
| "regulator init failed for %d\n", i); |
| max77686->rdev[i] = NULL; |
| goto err; |
| } |
| } |
| |
| return 0; |
| err: |
| while (--i >= 0) |
| regulator_unregister(max77686->rdev[i]); |
| return ret; |
| } |
| |
| static int max77686_pmic_remove(struct platform_device *pdev) |
| { |
| struct max77686_data *max77686 = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < MAX77686_REGULATORS; i++) |
| regulator_unregister(max77686->rdev[i]); |
| |
| return 0; |
| } |
| |
| static const struct platform_device_id max77686_pmic_id[] = { |
| {"max77686-pmic", 0}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(platform, max77686_pmic_id); |
| |
| static struct platform_driver max77686_pmic_driver = { |
| .driver = { |
| .name = "max77686-pmic", |
| .owner = THIS_MODULE, |
| }, |
| .probe = max77686_pmic_probe, |
| .remove = max77686_pmic_remove, |
| .id_table = max77686_pmic_id, |
| }; |
| |
| static int __init max77686_pmic_init(void) |
| { |
| return platform_driver_register(&max77686_pmic_driver); |
| } |
| subsys_initcall(max77686_pmic_init); |
| |
| static void __exit max77686_pmic_cleanup(void) |
| { |
| platform_driver_unregister(&max77686_pmic_driver); |
| } |
| module_exit(max77686_pmic_cleanup); |
| |
| MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); |
| MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>"); |
| MODULE_LICENSE("GPL"); |