| /* |
| * Driver for MT9M001 CMOS Image Sensor from Micron |
| * |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/videodev2.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/log2.h> |
| #include <linux/module.h> |
| |
| #include <media/soc_camera.h> |
| #include <media/soc_mediabus.h> |
| #include <media/v4l2-subdev.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/v4l2-ctrls.h> |
| |
| /* |
| * mt9m001 i2c address 0x5d |
| * The platform has to define ctruct i2c_board_info objects and link to them |
| * from struct soc_camera_link |
| */ |
| |
| /* mt9m001 selected register addresses */ |
| #define MT9M001_CHIP_VERSION 0x00 |
| #define MT9M001_ROW_START 0x01 |
| #define MT9M001_COLUMN_START 0x02 |
| #define MT9M001_WINDOW_HEIGHT 0x03 |
| #define MT9M001_WINDOW_WIDTH 0x04 |
| #define MT9M001_HORIZONTAL_BLANKING 0x05 |
| #define MT9M001_VERTICAL_BLANKING 0x06 |
| #define MT9M001_OUTPUT_CONTROL 0x07 |
| #define MT9M001_SHUTTER_WIDTH 0x09 |
| #define MT9M001_FRAME_RESTART 0x0b |
| #define MT9M001_SHUTTER_DELAY 0x0c |
| #define MT9M001_RESET 0x0d |
| #define MT9M001_READ_OPTIONS1 0x1e |
| #define MT9M001_READ_OPTIONS2 0x20 |
| #define MT9M001_GLOBAL_GAIN 0x35 |
| #define MT9M001_CHIP_ENABLE 0xF1 |
| |
| #define MT9M001_MAX_WIDTH 1280 |
| #define MT9M001_MAX_HEIGHT 1024 |
| #define MT9M001_MIN_WIDTH 48 |
| #define MT9M001_MIN_HEIGHT 32 |
| #define MT9M001_COLUMN_SKIP 20 |
| #define MT9M001_ROW_SKIP 12 |
| |
| /* MT9M001 has only one fixed colorspace per pixelcode */ |
| struct mt9m001_datafmt { |
| enum v4l2_mbus_pixelcode code; |
| enum v4l2_colorspace colorspace; |
| }; |
| |
| /* Find a data format by a pixel code in an array */ |
| static const struct mt9m001_datafmt *mt9m001_find_datafmt( |
| enum v4l2_mbus_pixelcode code, const struct mt9m001_datafmt *fmt, |
| int n) |
| { |
| int i; |
| for (i = 0; i < n; i++) |
| if (fmt[i].code == code) |
| return fmt + i; |
| |
| return NULL; |
| } |
| |
| static const struct mt9m001_datafmt mt9m001_colour_fmts[] = { |
| /* |
| * Order important: first natively supported, |
| * second supported with a GPIO extender |
| */ |
| {V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_COLORSPACE_SRGB}, |
| {V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB}, |
| }; |
| |
| static const struct mt9m001_datafmt mt9m001_monochrome_fmts[] = { |
| /* Order important - see above */ |
| {V4L2_MBUS_FMT_Y10_1X10, V4L2_COLORSPACE_JPEG}, |
| {V4L2_MBUS_FMT_Y8_1X8, V4L2_COLORSPACE_JPEG}, |
| }; |
| |
| struct mt9m001 { |
| struct v4l2_subdev subdev; |
| struct v4l2_ctrl_handler hdl; |
| struct { |
| /* exposure/auto-exposure cluster */ |
| struct v4l2_ctrl *autoexposure; |
| struct v4l2_ctrl *exposure; |
| }; |
| struct v4l2_rect rect; /* Sensor window */ |
| const struct mt9m001_datafmt *fmt; |
| const struct mt9m001_datafmt *fmts; |
| int num_fmts; |
| int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ |
| unsigned int total_h; |
| unsigned short y_skip_top; /* Lines to skip at the top */ |
| }; |
| |
| static struct mt9m001 *to_mt9m001(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); |
| } |
| |
| static int reg_read(struct i2c_client *client, const u8 reg) |
| { |
| return i2c_smbus_read_word_swapped(client, reg); |
| } |
| |
| static int reg_write(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| return i2c_smbus_write_word_swapped(client, reg, data); |
| } |
| |
| static int reg_set(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret | data); |
| } |
| |
| static int reg_clear(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret & ~data); |
| } |
| |
| static int mt9m001_init(struct i2c_client *client) |
| { |
| int ret; |
| |
| dev_dbg(&client->dev, "%s\n", __func__); |
| |
| /* |
| * We don't know, whether platform provides reset, issue a soft reset |
| * too. This returns all registers to their default values. |
| */ |
| ret = reg_write(client, MT9M001_RESET, 1); |
| if (!ret) |
| ret = reg_write(client, MT9M001_RESET, 0); |
| |
| /* Disable chip, synchronous option update */ |
| if (!ret) |
| ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0); |
| |
| return ret; |
| } |
| |
| static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| /* Switch to master "normal" mode or stop sensor readout */ |
| if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0) |
| return -EIO; |
| return 0; |
| } |
| |
| static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct v4l2_rect rect = a->c; |
| int ret; |
| const u16 hblank = 9, vblank = 25; |
| |
| if (mt9m001->fmts == mt9m001_colour_fmts) |
| /* |
| * Bayer format - even number of rows for simplicity, |
| * but let the user play with the top row. |
| */ |
| rect.height = ALIGN(rect.height, 2); |
| |
| /* Datasheet requirement: see register description */ |
| rect.width = ALIGN(rect.width, 2); |
| rect.left = ALIGN(rect.left, 2); |
| |
| soc_camera_limit_side(&rect.left, &rect.width, |
| MT9M001_COLUMN_SKIP, MT9M001_MIN_WIDTH, MT9M001_MAX_WIDTH); |
| |
| soc_camera_limit_side(&rect.top, &rect.height, |
| MT9M001_ROW_SKIP, MT9M001_MIN_HEIGHT, MT9M001_MAX_HEIGHT); |
| |
| mt9m001->total_h = rect.height + mt9m001->y_skip_top + vblank; |
| |
| /* Blanking and start values - default... */ |
| ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank); |
| if (!ret) |
| ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank); |
| |
| /* |
| * The caller provides a supported format, as verified per |
| * call to .try_mbus_fmt() |
| */ |
| if (!ret) |
| ret = reg_write(client, MT9M001_COLUMN_START, rect.left); |
| if (!ret) |
| ret = reg_write(client, MT9M001_ROW_START, rect.top); |
| if (!ret) |
| ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect.width - 1); |
| if (!ret) |
| ret = reg_write(client, MT9M001_WINDOW_HEIGHT, |
| rect.height + mt9m001->y_skip_top - 1); |
| if (!ret && v4l2_ctrl_g_ctrl(mt9m001->autoexposure) == V4L2_EXPOSURE_AUTO) |
| ret = reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h); |
| |
| if (!ret) |
| mt9m001->rect = rect; |
| |
| return ret; |
| } |
| |
| static int mt9m001_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| a->c = mt9m001->rect; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| |
| return 0; |
| } |
| |
| static int mt9m001_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) |
| { |
| a->bounds.left = MT9M001_COLUMN_SKIP; |
| a->bounds.top = MT9M001_ROW_SKIP; |
| a->bounds.width = MT9M001_MAX_WIDTH; |
| a->bounds.height = MT9M001_MAX_HEIGHT; |
| a->defrect = a->bounds; |
| a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; |
| a->pixelaspect.numerator = 1; |
| a->pixelaspect.denominator = 1; |
| |
| return 0; |
| } |
| |
| static int mt9m001_g_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| mf->width = mt9m001->rect.width; |
| mf->height = mt9m001->rect.height; |
| mf->code = mt9m001->fmt->code; |
| mf->colorspace = mt9m001->fmt->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| |
| return 0; |
| } |
| |
| static int mt9m001_s_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct v4l2_crop a = { |
| .c = { |
| .left = mt9m001->rect.left, |
| .top = mt9m001->rect.top, |
| .width = mf->width, |
| .height = mf->height, |
| }, |
| }; |
| int ret; |
| |
| /* No support for scaling so far, just crop. TODO: use skipping */ |
| ret = mt9m001_s_crop(sd, &a); |
| if (!ret) { |
| mf->width = mt9m001->rect.width; |
| mf->height = mt9m001->rect.height; |
| mt9m001->fmt = mt9m001_find_datafmt(mf->code, |
| mt9m001->fmts, mt9m001->num_fmts); |
| mf->colorspace = mt9m001->fmt->colorspace; |
| } |
| |
| return ret; |
| } |
| |
| static int mt9m001_try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| const struct mt9m001_datafmt *fmt; |
| |
| v4l_bound_align_image(&mf->width, MT9M001_MIN_WIDTH, |
| MT9M001_MAX_WIDTH, 1, |
| &mf->height, MT9M001_MIN_HEIGHT + mt9m001->y_skip_top, |
| MT9M001_MAX_HEIGHT + mt9m001->y_skip_top, 0, 0); |
| |
| if (mt9m001->fmts == mt9m001_colour_fmts) |
| mf->height = ALIGN(mf->height - 1, 2); |
| |
| fmt = mt9m001_find_datafmt(mf->code, mt9m001->fmts, |
| mt9m001->num_fmts); |
| if (!fmt) { |
| fmt = mt9m001->fmt; |
| mf->code = fmt->code; |
| } |
| |
| mf->colorspace = fmt->colorspace; |
| |
| return 0; |
| } |
| |
| static int mt9m001_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) |
| return -EINVAL; |
| |
| if (id->match.addr != client->addr) |
| return -ENODEV; |
| |
| id->ident = mt9m001->model; |
| id->revision = 0; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int mt9m001_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| reg->size = 2; |
| reg->val = reg_read(client, reg->reg); |
| |
| if (reg->val > 0xffff) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int mt9m001_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| if (reg_write(client, reg->reg, reg->val) < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| #endif |
| |
| static int mt9m001_g_volatile_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct mt9m001 *mt9m001 = container_of(ctrl->handler, |
| struct mt9m001, hdl); |
| s32 min, max; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_EXPOSURE_AUTO: |
| min = mt9m001->exposure->minimum; |
| max = mt9m001->exposure->maximum; |
| mt9m001->exposure->val = |
| (524 + (mt9m001->total_h - 1) * (max - min)) / 1048 + min; |
| break; |
| } |
| return 0; |
| } |
| |
| static int mt9m001_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct mt9m001 *mt9m001 = container_of(ctrl->handler, |
| struct mt9m001, hdl); |
| struct v4l2_subdev *sd = &mt9m001->subdev; |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct v4l2_ctrl *exp = mt9m001->exposure; |
| int data; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| if (ctrl->val) |
| data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); |
| else |
| data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); |
| if (data < 0) |
| return -EIO; |
| return 0; |
| |
| case V4L2_CID_GAIN: |
| /* See Datasheet Table 7, Gain settings. */ |
| if (ctrl->val <= ctrl->default_value) { |
| /* Pack it into 0..1 step 0.125, register values 0..8 */ |
| unsigned long range = ctrl->default_value - ctrl->minimum; |
| data = ((ctrl->val - ctrl->minimum) * 8 + range / 2) / range; |
| |
| dev_dbg(&client->dev, "Setting gain %d\n", data); |
| data = reg_write(client, MT9M001_GLOBAL_GAIN, data); |
| if (data < 0) |
| return -EIO; |
| } else { |
| /* Pack it into 1.125..15 variable step, register values 9..67 */ |
| /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ |
| unsigned long range = ctrl->maximum - ctrl->default_value - 1; |
| unsigned long gain = ((ctrl->val - ctrl->default_value - 1) * |
| 111 + range / 2) / range + 9; |
| |
| if (gain <= 32) |
| data = gain; |
| else if (gain <= 64) |
| data = ((gain - 32) * 16 + 16) / 32 + 80; |
| else |
| data = ((gain - 64) * 7 + 28) / 56 + 96; |
| |
| dev_dbg(&client->dev, "Setting gain from %d to %d\n", |
| reg_read(client, MT9M001_GLOBAL_GAIN), data); |
| data = reg_write(client, MT9M001_GLOBAL_GAIN, data); |
| if (data < 0) |
| return -EIO; |
| } |
| return 0; |
| |
| case V4L2_CID_EXPOSURE_AUTO: |
| if (ctrl->val == V4L2_EXPOSURE_MANUAL) { |
| unsigned long range = exp->maximum - exp->minimum; |
| unsigned long shutter = ((exp->val - exp->minimum) * 1048 + |
| range / 2) / range + 1; |
| |
| dev_dbg(&client->dev, |
| "Setting shutter width from %d to %lu\n", |
| reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); |
| if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0) |
| return -EIO; |
| } else { |
| const u16 vblank = 25; |
| |
| mt9m001->total_h = mt9m001->rect.height + |
| mt9m001->y_skip_top + vblank; |
| if (reg_write(client, MT9M001_SHUTTER_WIDTH, mt9m001->total_h) < 0) |
| return -EIO; |
| } |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| /* |
| * Interface active, can use i2c. If it fails, it can indeed mean, that |
| * this wasn't our capture interface, so, we wait for the right one |
| */ |
| static int mt9m001_video_probe(struct soc_camera_link *icl, |
| struct i2c_client *client) |
| { |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| s32 data; |
| unsigned long flags; |
| int ret; |
| |
| /* Enable the chip */ |
| data = reg_write(client, MT9M001_CHIP_ENABLE, 1); |
| dev_dbg(&client->dev, "write: %d\n", data); |
| |
| /* Read out the chip version register */ |
| data = reg_read(client, MT9M001_CHIP_VERSION); |
| |
| /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ |
| switch (data) { |
| case 0x8411: |
| case 0x8421: |
| mt9m001->model = V4L2_IDENT_MT9M001C12ST; |
| mt9m001->fmts = mt9m001_colour_fmts; |
| break; |
| case 0x8431: |
| mt9m001->model = V4L2_IDENT_MT9M001C12STM; |
| mt9m001->fmts = mt9m001_monochrome_fmts; |
| break; |
| default: |
| dev_err(&client->dev, |
| "No MT9M001 chip detected, register read %x\n", data); |
| return -ENODEV; |
| } |
| |
| mt9m001->num_fmts = 0; |
| |
| /* |
| * This is a 10bit sensor, so by default we only allow 10bit. |
| * The platform may support different bus widths due to |
| * different routing of the data lines. |
| */ |
| if (icl->query_bus_param) |
| flags = icl->query_bus_param(icl); |
| else |
| flags = SOCAM_DATAWIDTH_10; |
| |
| if (flags & SOCAM_DATAWIDTH_10) |
| mt9m001->num_fmts++; |
| else |
| mt9m001->fmts++; |
| |
| if (flags & SOCAM_DATAWIDTH_8) |
| mt9m001->num_fmts++; |
| |
| mt9m001->fmt = &mt9m001->fmts[0]; |
| |
| dev_info(&client->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, |
| data == 0x8431 ? "C12STM" : "C12ST"); |
| |
| ret = mt9m001_init(client); |
| if (ret < 0) |
| dev_err(&client->dev, "Failed to initialise the camera\n"); |
| |
| /* mt9m001_init() has reset the chip, returning registers to defaults */ |
| return v4l2_ctrl_handler_setup(&mt9m001->hdl); |
| } |
| |
| static void mt9m001_video_remove(struct soc_camera_link *icl) |
| { |
| if (icl->free_bus) |
| icl->free_bus(icl); |
| } |
| |
| static int mt9m001_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| *lines = mt9m001->y_skip_top; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops mt9m001_ctrl_ops = { |
| .g_volatile_ctrl = mt9m001_g_volatile_ctrl, |
| .s_ctrl = mt9m001_s_ctrl, |
| }; |
| |
| static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { |
| .g_chip_ident = mt9m001_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = mt9m001_g_register, |
| .s_register = mt9m001_s_register, |
| #endif |
| }; |
| |
| static int mt9m001_enum_fmt(struct v4l2_subdev *sd, unsigned int index, |
| enum v4l2_mbus_pixelcode *code) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| if (index >= mt9m001->num_fmts) |
| return -EINVAL; |
| |
| *code = mt9m001->fmts[index].code; |
| return 0; |
| } |
| |
| static int mt9m001_g_mbus_config(struct v4l2_subdev *sd, |
| struct v4l2_mbus_config *cfg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct soc_camera_link *icl = soc_camera_i2c_to_link(client); |
| |
| /* MT9M001 has all capture_format parameters fixed */ |
| cfg->flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | |
| V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH | |
| V4L2_MBUS_DATA_ACTIVE_HIGH | V4L2_MBUS_MASTER; |
| cfg->type = V4L2_MBUS_PARALLEL; |
| cfg->flags = soc_camera_apply_board_flags(icl, cfg); |
| |
| return 0; |
| } |
| |
| static int mt9m001_s_mbus_config(struct v4l2_subdev *sd, |
| const struct v4l2_mbus_config *cfg) |
| { |
| const struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct soc_camera_link *icl = soc_camera_i2c_to_link(client); |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| unsigned int bps = soc_mbus_get_fmtdesc(mt9m001->fmt->code)->bits_per_sample; |
| |
| if (icl->set_bus_param) |
| return icl->set_bus_param(icl, 1 << (bps - 1)); |
| |
| /* |
| * Without board specific bus width settings we only support the |
| * sensors native bus width |
| */ |
| return bps == 10 ? 0 : -EINVAL; |
| } |
| |
| static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { |
| .s_stream = mt9m001_s_stream, |
| .s_mbus_fmt = mt9m001_s_fmt, |
| .g_mbus_fmt = mt9m001_g_fmt, |
| .try_mbus_fmt = mt9m001_try_fmt, |
| .s_crop = mt9m001_s_crop, |
| .g_crop = mt9m001_g_crop, |
| .cropcap = mt9m001_cropcap, |
| .enum_mbus_fmt = mt9m001_enum_fmt, |
| .g_mbus_config = mt9m001_g_mbus_config, |
| .s_mbus_config = mt9m001_s_mbus_config, |
| }; |
| |
| static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = { |
| .g_skip_top_lines = mt9m001_g_skip_top_lines, |
| }; |
| |
| static struct v4l2_subdev_ops mt9m001_subdev_ops = { |
| .core = &mt9m001_subdev_core_ops, |
| .video = &mt9m001_subdev_video_ops, |
| .sensor = &mt9m001_subdev_sensor_ops, |
| }; |
| |
| static int mt9m001_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct mt9m001 *mt9m001; |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct soc_camera_link *icl = soc_camera_i2c_to_link(client); |
| int ret; |
| |
| if (!icl) { |
| dev_err(&client->dev, "MT9M001 driver needs platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { |
| dev_warn(&adapter->dev, |
| "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); |
| return -EIO; |
| } |
| |
| mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL); |
| if (!mt9m001) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); |
| v4l2_ctrl_handler_init(&mt9m001->hdl, 4); |
| v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, |
| V4L2_CID_VFLIP, 0, 1, 1, 0); |
| v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, |
| V4L2_CID_GAIN, 0, 127, 1, 64); |
| mt9m001->exposure = v4l2_ctrl_new_std(&mt9m001->hdl, &mt9m001_ctrl_ops, |
| V4L2_CID_EXPOSURE, 1, 255, 1, 255); |
| /* |
| * Simulated autoexposure. If enabled, we calculate shutter width |
| * ourselves in the driver based on vertical blanking and frame width |
| */ |
| mt9m001->autoexposure = v4l2_ctrl_new_std_menu(&mt9m001->hdl, |
| &mt9m001_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0, |
| V4L2_EXPOSURE_AUTO); |
| mt9m001->subdev.ctrl_handler = &mt9m001->hdl; |
| if (mt9m001->hdl.error) { |
| int err = mt9m001->hdl.error; |
| |
| kfree(mt9m001); |
| return err; |
| } |
| v4l2_ctrl_auto_cluster(2, &mt9m001->autoexposure, |
| V4L2_EXPOSURE_MANUAL, true); |
| |
| /* Second stage probe - when a capture adapter is there */ |
| mt9m001->y_skip_top = 0; |
| mt9m001->rect.left = MT9M001_COLUMN_SKIP; |
| mt9m001->rect.top = MT9M001_ROW_SKIP; |
| mt9m001->rect.width = MT9M001_MAX_WIDTH; |
| mt9m001->rect.height = MT9M001_MAX_HEIGHT; |
| |
| ret = mt9m001_video_probe(icl, client); |
| if (ret) { |
| v4l2_ctrl_handler_free(&mt9m001->hdl); |
| kfree(mt9m001); |
| } |
| |
| return ret; |
| } |
| |
| static int mt9m001_remove(struct i2c_client *client) |
| { |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct soc_camera_link *icl = soc_camera_i2c_to_link(client); |
| |
| v4l2_device_unregister_subdev(&mt9m001->subdev); |
| v4l2_ctrl_handler_free(&mt9m001->hdl); |
| mt9m001_video_remove(icl); |
| kfree(mt9m001); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id mt9m001_id[] = { |
| { "mt9m001", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mt9m001_id); |
| |
| static struct i2c_driver mt9m001_i2c_driver = { |
| .driver = { |
| .name = "mt9m001", |
| }, |
| .probe = mt9m001_probe, |
| .remove = mt9m001_remove, |
| .id_table = mt9m001_id, |
| }; |
| |
| module_i2c_driver(mt9m001_i2c_driver); |
| |
| MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); |
| MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); |
| MODULE_LICENSE("GPL"); |