| /* Copyright (c) 2016, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "skeleton64.dtsi" |
| #include <dt-bindings/clock/qcom,gcc-skunk.h> |
| #include <dt-bindings/clock/qcom,camcc-skunk.h> |
| #include <dt-bindings/clock/qcom,dispcc-skunk.h> |
| #include <dt-bindings/clock/qcom,gpucc-skunk.h> |
| #include <dt-bindings/clock/qcom,videocc-skunk.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/soc/qcom,tcs-mbox.h> |
| |
| / { |
| model = "Qualcomm Technologies, Inc. MSM SKUNK"; |
| compatible = "qcom,msmskunk"; |
| qcom,msm-id = <321 0x0>; |
| interrupt-parent = <&intc>; |
| |
| aliases { |
| ufshc1 = &ufshc_mem; /* Embedded UFS slot */ |
| ufshc2 = &ufshc_card; /* Removable UFS slot */ |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "spin-table"; |
| cache-size = <0x8000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x20000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| |
| L3_0: l3-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x200000>; |
| cache-level = <3>; |
| }; |
| }; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x100>; |
| enable-method = "spin-table"; |
| cache-size = <0x8000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_1>; |
| L2_1: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x20000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x200>; |
| enable-method = "spin-table"; |
| cache-size = <0x8000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_2>; |
| L2_2: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x20000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x300>; |
| enable-method = "spin-table"; |
| cache-size = <0x8000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_3>; |
| L2_3: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x20000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x400>; |
| enable-method = "spin-table"; |
| cache-size = <0x20000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_4>; |
| L2_4: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x40000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x500>; |
| enable-method = "spin-table"; |
| cache-size = <0x20000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_5>; |
| L2_5: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x40000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x600>; |
| enable-method = "spin-table"; |
| cache-size = <0x20000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_6>; |
| L2_6: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x40000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| CPU7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = <0x0 0x700>; |
| enable-method = "spin-table"; |
| cache-size = <0x20000>; |
| cpu-release-addr = <0x0 0x90000000>; |
| next-level-cache = <&L2_7>; |
| L2_7: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-size = <0x40000>; |
| cache-level = <2>; |
| next-level-cache = <&L3_0>; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| }; |
| |
| soc: soc { }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| removed_regions: removed_regions@85800000 { |
| no-map; |
| reg = <0 0x85800000 0 0x3700000>; |
| }; |
| |
| pil_camera_mem: camera_region@8ab00000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x8ab00000 0 0x500000>; |
| }; |
| |
| pil_modem_mem: modem_region@8b000000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x8b000000 0 0x6e00000>; |
| }; |
| |
| pil_video_mem: pil_video_region@91e00000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x91e00000 0 0x500000>; |
| }; |
| |
| pil_cdsp_mem: cdsp_regions@92300000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x92300000 0 0x800000>; |
| }; |
| |
| pil_adsp_mem: pil_adsp_region@92b00000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x92b00000 0 0x1a00000>; |
| }; |
| |
| pil_slpi_mem: pil_slpi_region@94500000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x94500000 0 0xf00000>; |
| }; |
| |
| pil_spss_mem: spss_region@95400000 { |
| compatible = "removed-dma-pool"; |
| no-map; |
| reg = <0 0x95400000 0 0x700000>; |
| }; |
| |
| adsp_mem: adsp_region { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x800000>; |
| }; |
| |
| qseecom_mem: qseecom_region { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x1400000>; |
| }; |
| |
| sp_mem: sp_region { /* SPSS-HLOS ION shared mem */ |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; /* 32-bit */ |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x800000>; |
| }; |
| |
| secure_display_memory: secure_display_region { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x5c00000>; |
| }; |
| |
| /* global autoconfigured region for contiguous allocations */ |
| linux,cma { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x00000000 0 0xffffffff>; |
| reusable; |
| alignment = <0 0x400000>; |
| size = <0 0x2000000>; |
| linux,cma-default; |
| }; |
| }; |
| }; |
| |
| #include "msm-gdsc-skunk.dtsi" |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| reg = <0x17a00000 0x10000>, /* GICD */ |
| <0x17a60000 0x100000>; /* GICR * 8 */ |
| interrupts = <1 9 4>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 1 0xf08>, |
| <1 2 0xf08>, |
| <1 3 0xf08>, |
| <1 0 0xf08>; |
| clock-frequency = <19200000>; |
| }; |
| |
| timer@0x17C90000{ |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x17C90000 0x1000>; |
| clock-frequency = <19200000>; |
| |
| frame@0x17CA0000 { |
| frame-number = <0>; |
| interrupts = <0 8 0x4>, |
| <0 7 0x4>; |
| reg = <0x17CA0000 0x1000>, |
| <0x17CB0000 0x1000>; |
| }; |
| |
| frame@17cc0000 { |
| frame-number = <1>; |
| interrupts = <0 9 0x4>; |
| reg = <0x17cc0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17cd0000 { |
| frame-number = <2>; |
| interrupts = <0 10 0x4>; |
| reg = <0x17cd0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17ce0000 { |
| frame-number = <3>; |
| interrupts = <0 11 0x4>; |
| reg = <0x17ce0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17cf0000 { |
| frame-number = <4>; |
| interrupts = <0 12 0x4>; |
| reg = <0x17cf0000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17d00000 { |
| frame-number = <5>; |
| interrupts = <0 36 0x4>; |
| reg = <0x17d00000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17d10000 { |
| frame-number = <6>; |
| interrupts = <0 37 0x4>; |
| reg = <0x17d10000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| clock_gcc: qcom,gcc@100000 { |
| compatible = "qcom,gcc-msmskunk"; |
| reg = <0x100000 0x1f0000>; |
| reg-names = "cc_base"; |
| vdd_cx-supply = <&pm8998_s9_level>; |
| vdd_cx_ao-supply = <&pm8998_s9_level_ao>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_videocc: qcom,videocc@ab00000 { |
| compatible = "qcom,video_cc-msmskunk"; |
| reg = <0xab00000 0x10000>; |
| reg-names = "cc_base"; |
| vdd_cx-supply = <&pm8998_s9_level>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_camcc: qcom,camcc { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "camcc_clocks"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_dispcc: qcom,dispcc { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "dispcc_clocks"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| clock_gpucc: qcom,gpucc { |
| compatible = "qcom,dummycc"; |
| clock-output-names = "gpucc_clocks"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| ufsphy_mem: ufsphy_mem@1d87000 { |
| reg = <0x1d87000 0xda8>; /* PHY regs */ |
| reg-names = "phy_mem"; |
| #phy-cells = <0>; |
| |
| /* TODO: add "ref_clk_src" */ |
| clock-names = "ref_clk", |
| "ref_aux_clk"; |
| clocks = <&clock_gcc GCC_UFS_MEM_CLKREF_CLK>, |
| <&clock_gcc GCC_UFS_PHY_PHY_AUX_CLK>; |
| |
| status = "disabled"; |
| }; |
| |
| ufshc_mem: ufshc_mem@1d84000 { |
| compatible = "qcom,ufshc"; |
| reg = <0x1d84000 0x2500>; |
| interrupts = <0 265 0>; |
| phys = <&ufsphy_mem>; |
| phy-names = "ufsphy"; |
| |
| lanes-per-direction = <2>; |
| dev-ref-clk-freq = <0>; /* 19.2 MHz */ |
| |
| /* TODO: add "ref_clk" */ |
| clock-names = |
| "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "core_clk_ice", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| /* TODO: add HW CTL clocks when available */ |
| clocks = |
| <&clock_gcc GCC_UFS_PHY_AXI_CLK>, |
| <&clock_gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, |
| <&clock_gcc GCC_UFS_PHY_AHB_CLK>, |
| <&clock_gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, |
| <&clock_gcc GCC_UFS_PHY_ICE_CORE_CLK>, |
| <&clock_gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, |
| <&clock_gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, |
| <&clock_gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; |
| freq-table-hz = |
| <50000000 200000000>, |
| <0 0>, |
| <0 0>, |
| <37500000 150000000>, |
| <75000000 300000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| |
| qcom,msm-bus,name = "ufshc_mem"; |
| qcom,msm-bus,num-cases = <22>; |
| qcom,msm-bus,num-paths = <2>; |
| qcom,msm-bus,vectors-KBps = |
| <95 512 0 0>, <1 650 0 0>, /* No vote */ |
| <95 512 922 0>, <1 650 1000 0>, /* PWM G1 */ |
| <95 512 1844 0>, <1 650 1000 0>, /* PWM G2 */ |
| <95 512 3688 0>, <1 650 1000 0>, /* PWM G3 */ |
| <95 512 7376 0>, <1 650 1000 0>, /* PWM G4 */ |
| <95 512 1844 0>, <1 650 1000 0>, /* PWM G1 L2 */ |
| <95 512 3688 0>, <1 650 1000 0>, /* PWM G2 L2 */ |
| <95 512 7376 0>, <1 650 1000 0>, /* PWM G3 L2 */ |
| <95 512 14752 0>, <1 650 1000 0>, /* PWM G4 L2 */ |
| <95 512 127796 0>, <1 650 1000 0>, /* HS G1 RA */ |
| <95 512 255591 0>, <1 650 1000 0>, /* HS G2 RA */ |
| <95 512 511181 0>, <1 650 1000 0>, /* HS G3 RA */ |
| <95 512 255591 0>, <1 650 1000 0>, /* HS G1 RA L2 */ |
| <95 512 511181 0>, <1 650 1000 0>, /* HS G2 RA L2 */ |
| <95 512 1022362 0>, <1 650 1000 0>, /* HS G3 RA L2 */ |
| <95 512 149422 0>, <1 650 1000 0>, /* HS G1 RB */ |
| <95 512 298189 0>, <1 650 1000 0>, /* HS G2 RB */ |
| <95 512 596378 0>, <1 650 1000 0>, /* HS G3 RB */ |
| <95 512 298189 0>, <1 650 1000 0>, /* HS G1 RB L2 */ |
| <95 512 596378 0>, <1 650 1000 0>, /* HS G2 RB L2 */ |
| <95 512 1192756 0>, <1 650 1000 0>, /* HS G3 RB L2 */ |
| <95 512 4096000 0>, <1 650 1000 0>; /* Max. bandwidth */ |
| qcom,bus-vector-names = "MIN", |
| "PWM_G1_L1", "PWM_G2_L1", "PWM_G3_L1", "PWM_G4_L1", |
| "PWM_G1_L2", "PWM_G2_L2", "PWM_G3_L2", "PWM_G4_L2", |
| "HS_RA_G1_L1", "HS_RA_G2_L1", "HS_RA_G3_L1", |
| "HS_RA_G1_L2", "HS_RA_G2_L2", "HS_RA_G3_L2", |
| "HS_RB_G1_L1", "HS_RB_G2_L1", "HS_RB_G3_L1", |
| "HS_RB_G1_L2", "HS_RB_G2_L2", "HS_RB_G3_L2", |
| "MAX"; |
| |
| status = "disabled"; |
| }; |
| |
| ufsphy_card: ufsphy_card@1da7000 { |
| reg = <0x1da7000 0xda8>; /* PHY regs */ |
| reg-names = "phy_mem"; |
| #phy-cells = <0>; |
| |
| /* TODO: add "ref_clk_src" */ |
| clock-names = "ref_clk", |
| "ref_aux_clk"; |
| clocks = <&clock_gcc GCC_UFS_CARD_CLKREF_CLK>, |
| <&clock_gcc GCC_UFS_CARD_PHY_AUX_CLK>; |
| |
| status = "disabled"; |
| }; |
| |
| ufshc_card: ufshc_card@1da4000 { |
| compatible = "qcom,ufshc"; |
| reg = <0x1da4000 0x2500>; |
| interrupts = <0 125 0>; |
| phys = <&ufsphy_card>; |
| phy-names = "ufsphy"; |
| |
| lanes-per-direction = <1>; |
| dev-ref-clk-freq = <0>; /* 19.2 MHz */ |
| |
| /* TODO: add "ref_clk" */ |
| clock-names = |
| "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "core_clk_ice", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk"; |
| /* TODO: add HW CTL clocks when available */ |
| clocks = |
| <&clock_gcc GCC_UFS_CARD_AXI_CLK>, |
| <&clock_gcc GCC_AGGRE_UFS_CARD_AXI_CLK>, |
| <&clock_gcc GCC_UFS_CARD_AHB_CLK>, |
| <&clock_gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>, |
| <&clock_gcc GCC_UFS_CARD_ICE_CORE_CLK>, |
| <&clock_gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>, |
| <&clock_gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>; |
| freq-table-hz = |
| <50000000 200000000>, |
| <0 0>, |
| <0 0>, |
| <37500000 150000000>, |
| <75000000 300000000>, |
| <0 0>, |
| <0 0>; |
| |
| qcom,msm-bus,name = "ufshc_card"; |
| qcom,msm-bus,num-cases = <9>; |
| qcom,msm-bus,num-paths = <2>; |
| qcom,msm-bus,vectors-KBps = |
| <95 512 0 0>, <1 650 0 0>, /* No vote */ |
| <95 512 922 0>, <1 650 1000 0>, /* PWM G1 */ |
| <95 512 127796 0>, <1 650 1000 0>, /* HS G1 RA */ |
| <95 512 255591 0>, <1 650 1000 0>, /* HS G2 RA */ |
| <95 512 511181 0>, <1 650 1000 0>, /* HS G3 RA */ |
| <95 512 149422 0>, <1 650 1000 0>, /* HS G1 RB */ |
| <95 512 298189 0>, <1 650 1000 0>, /* HS G2 RB */ |
| <95 512 596378 0>, <1 650 1000 0>, /* HS G3 RB */ |
| <95 512 4096000 0>, <1 650 1000 0>; /* Max. bandwidth */ |
| qcom,bus-vector-names = "MIN", |
| "PWM_G1_L1", |
| "HS_RA_G1_L1", "HS_RA_G2_L1", "HS_RA_G3_L1", |
| "HS_RB_G1_L1", "HS_RB_G2_L1", "HS_RB_G3_L1", |
| "MAX"; |
| |
| status = "disabled"; |
| }; |
| |
| pil_modem: qcom,mss@4080000 { |
| compatible = "qcom,pil-q6v55-mss"; |
| reg = <0x4080000 0x100>, |
| <0x1f63000 0x008>, |
| <0x1f65000 0x008>, |
| <0x1f64000 0x008>, |
| <0x4180000 0x020>, |
| <0x00179000 0x004>; |
| reg-names = "qdsp6_base", "halt_q6", "halt_modem", |
| "halt_nc", "rmb_base", "restart_reg"; |
| |
| clocks = <&clock_gcc RPMH_CXO_CLK>, |
| <&clock_gcc GCC_MSS_CFG_AHB_CLK>, |
| <&clock_gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, |
| <&clock_gcc GCC_BOOT_ROM_AHB_CLK>, |
| <&clock_gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, |
| <&clock_gcc GCC_MSS_SNOC_AXI_CLK>, |
| <&clock_gcc GCC_MSS_MFAB_AXIS_CLK>; |
| clock-names = "xo", "iface_clk", "bus_clk", |
| "mem_clk", "gpll0_mss_clk", "snoc_axi_clk", |
| "mnoc_axi_clk"; |
| qcom,proxy-clock-names = "xo"; |
| qcom,active-clock-names = "iface_clk", "bus_clk", "mem_clk", |
| "gpll0_mss_clk", "snoc_axi_clk", |
| "mnoc_axi_clk"; |
| |
| interrupts = <0 266 1>; |
| vdd_cx-supply = <&pm8998_s9_level>; |
| vdd_cx-voltage = <RPMH_REGULATOR_LEVEL_MAX>; |
| vdd_mx-supply = <&pm8998_s6_level>; |
| vdd_mx-uV = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,firmware-name = "modem"; |
| qcom,pil-self-auth; |
| qcom,sysmon-id = <0>; |
| qcom,ssctl-instance-id = <0x12>; |
| qcom,override-acc; |
| qcom,qdsp6v65-1-0; |
| status = "ok"; |
| memory-region = <&pil_modem_mem>; |
| qcom,mem-protect-id = <0xF>; |
| |
| /* GPIO inputs from mss */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_1_in 0 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_1_in 1 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_1_in 2 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_1_in 3 0>; |
| qcom,gpio-shutdown-ack = <&smp2pgpio_ssr_smp2p_1_in 7 0>; |
| |
| /* GPIO output to mss */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_1_out 0 0>; |
| }; |
| |
| qcom,lpass@17300000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x17300000 0x00100>; |
| interrupts = <0 162 1>; |
| |
| vdd_cx-supply = <&pm8998_s9_level>; |
| qcom,proxy-reg-names = "vdd_cx"; |
| qcom,vdd_cx-uV-uA = <RPMH_REGULATOR_LEVEL_MAX 100000>; |
| |
| clocks = <&clock_gcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| qcom,proxy-clock-names = "xo"; |
| |
| qcom,pas-id = <1>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <423>; |
| qcom,sysmon-id = <1>; |
| status = "ok"; |
| qcom,ssctl-instance-id = <0x14>; |
| qcom,firmware-name = "adsp"; |
| memory-region = <&pil_adsp_mem>; |
| |
| /* GPIO inputs from lpass */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_2_in 0 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_2_in 2 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_2_in 1 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_2_in 3 0>; |
| |
| /* GPIO output to lpass */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_2_out 0 0>; |
| }; |
| |
| qcom,ssc@5c00000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x5c00000 0x4000>; |
| interrupts = <0 494 1>; |
| |
| vdd_cx-supply = <&pm8998_l27_level>; |
| vdd_px-supply = <&pm8998_lvs2>; |
| qcom,vdd_cx-uV-uA = <RPMH_REGULATOR_LEVEL_MAX 0>; |
| qcom,proxy-reg-names = "vdd_cx", "vdd_px"; |
| qcom,keep-proxy-regs-on; |
| |
| clocks = <&clock_gcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| qcom,proxy-clock-names = "xo"; |
| |
| qcom,pas-id = <12>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <424>; |
| qcom,sysmon-id = <3>; |
| qcom,ssctl-instance-id = <0x16>; |
| qcom,firmware-name = "slpi"; |
| status = "ok"; |
| memory-region = <&pil_slpi_mem>; |
| |
| /* GPIO inputs from ssc */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_3_in 0 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_3_in 2 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_3_in 1 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_3_in 3 0>; |
| |
| /* GPIO output to ssc */ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_3_out 0 0>; |
| }; |
| |
| eud: qcom,msm-eud@88e0000 { |
| compatible = "qcom,msm-eud"; |
| interrupt-names = "eud_irq"; |
| interrupts = <GIC_SPI 492 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x88e0000 0x2000>; |
| reg-names = "eud_base"; |
| status = "ok"; |
| }; |
| |
| qcom,spss@1880000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x188101c 0x4>, |
| <0x1881024 0x4>, |
| <0x1881028 0x4>, |
| <0x188103c 0x4>, |
| <0x1882014 0x4>; |
| reg-names = "sp2soc_irq_status", "sp2soc_irq_clr", |
| "sp2soc_irq_mask", "rmb_err", "rmb_err_spare2"; |
| interrupts = <0 352 1>; |
| |
| vdd_cx-supply = <&pm8998_s9_level>; |
| qcom,proxy-reg-names = "vdd_cx"; |
| qcom,vdd_cx-uV-uA = <RPMH_REGULATOR_LEVEL_MAX 100000>; |
| vdd_mx-supply = <&pm8998_s6_level>; |
| vdd_mx-uV = <RPMH_REGULATOR_LEVEL_MAX 100000>; |
| |
| clocks = <&clock_gcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| qcom,proxy-clock-names = "xo"; |
| qcom,pil-generic-irq-handler; |
| status = "ok"; |
| |
| qcom,pas-id = <14>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,firmware-name = "spss"; |
| memory-region = <&pil_spss_mem>; |
| qcom,spss-scsr-bits = <24 25>; |
| }; |
| |
| wdog: qcom,wdt@17980000{ |
| compatible = "qcom,msm-watchdog"; |
| reg = <0x17980000 0x1000>; |
| reg-names = "wdt-base"; |
| interrupts = <0 3 0>, <0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping; |
| qcom,wakeup-enable; |
| }; |
| |
| qcom,turing@8300000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0x8300000 0x100000>; |
| interrupts = <0 578 1>; |
| |
| vdd_cx-supply = <&pm8998_s9_level>; |
| qcom,proxy-reg-names = "vdd_cx"; |
| qcom,vdd_cx-uV-uA = <RPMH_REGULATOR_LEVEL_MAX 100000>; |
| |
| clocks = <&clock_gcc RPMH_CXO_CLK>; |
| clock-names = "xo"; |
| qcom,proxy-clock-names = "xo"; |
| |
| qcom,pas-id = <18>; |
| qcom,proxy-timeout-ms = <10000>; |
| qcom,smem-id = <423>; |
| qcom,sysmon-id = <7>; |
| qcom,ssctl-instance-id = <0x17>; |
| qcom,firmware-name = "cdsp"; |
| memory-region = <&pil_cdsp_mem>; |
| |
| /* GPIO inputs from turing */ |
| qcom,gpio-err-fatal = <&smp2pgpio_ssr_smp2p_5_in 0 0>; |
| qcom,gpio-proxy-unvote = <&smp2pgpio_ssr_smp2p_5_in 2 0>; |
| qcom,gpio-err-ready = <&smp2pgpio_ssr_smp2p_5_in 1 0>; |
| qcom,gpio-stop-ack = <&smp2pgpio_ssr_smp2p_5_in 3 0>; |
| |
| /* GPIO output to turing*/ |
| qcom,gpio-force-stop = <&smp2pgpio_ssr_smp2p_5_out 0 0>; |
| status = "ok"; |
| }; |
| |
| qcom,msm-imem@146bf000 { |
| compatible = "qcom,msm-imem"; |
| reg = <0x146bf000 0x1000>; |
| ranges = <0x0 0x146bf000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| mem_dump_table@10 { |
| compatible = "qcom,msm-imem-mem_dump_table"; |
| reg = <0x10 8>; |
| }; |
| |
| pil@94c { |
| compatible = "qcom,msm-imem-pil"; |
| reg = <0x94c 200>; |
| }; |
| }; |
| |
| qcom,venus@aae0000 { |
| compatible = "qcom,pil-tz-generic"; |
| reg = <0xaae0000 0x4000>; |
| |
| vdd-supply = <&venus_gdsc>; |
| qcom,proxy-reg-names = "vdd"; |
| |
| clocks = <&clock_videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, |
| <&clock_videocc VIDEO_CC_VENUS_AHB_CLK>, |
| <&clock_videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; |
| clock-names = "core_clk", "iface_clk", "bus_clk"; |
| qcom,proxy-clock-names = "core_clk", "iface_clk", "bus_clk"; |
| |
| qcom,pas-id = <9>; |
| qcom,msm-bus,name = "pil-venus"; |
| qcom,msm-bus,num-cases = <2>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = |
| <63 512 0 0>, |
| <63 512 0 304000>; |
| qcom,proxy-timeout-ms = <100>; |
| qcom,firmware-name = "venus"; |
| memory-region = <&pil_video_mem>; |
| status = "ok"; |
| }; |
| |
| kryo3xx-erp { |
| compatible = "arm,arm64-kryo3xx-cpu-erp"; |
| interrupts = <1 6 4>, |
| <1 7 4>, |
| <0 34 4>, |
| <0 35 4>; |
| |
| interrupt-names = "l1-l2-faultirq", |
| "l1-l2-errirq", |
| "l3-scu-errirq", |
| "l3-scu-faultirq"; |
| }; |
| |
| qcom,llcc@1300000 { |
| compatible = "qcom,llcc-core", "syscon", "simple-mfd"; |
| reg = <0x1300000 0x50000>; |
| reg-names = "llcc_base"; |
| |
| llcc: qcom,msmskunk-llcc { |
| compatible = "qcom,msmskunk-llcc"; |
| #cache-cells = <1>; |
| max-slices = <32>; |
| }; |
| |
| qcom,llcc-erp { |
| compatible = "qcom,llcc-erp"; |
| interrupt-names = "ecc_irq"; |
| interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| qcom,llcc-amon { |
| compatible = "qcom,llcc-amon"; |
| }; |
| }; |
| |
| qcom,ipc-spinlock@1f40000 { |
| compatible = "qcom,ipc-spinlock-sfpb"; |
| reg = <0x1f40000 0x8000>; |
| qcom,num-locks = <8>; |
| }; |
| |
| qcom,smem@86000000 { |
| compatible = "qcom,smem"; |
| reg = <0x86000000 0x200000>, |
| <0x17911008 0x4>, |
| <0x778000 0x7000>, |
| <0x1fd4000 0x8>; |
| reg-names = "smem", "irq-reg-base", "aux-mem1", |
| "smem_targ_info_reg"; |
| qcom,mpu-enabled; |
| }; |
| |
| qcom,glink-mailbox-xprt-spss@1885008 { |
| compatible = "qcom,glink-mailbox-xprt"; |
| reg = <0x1885008 0x8>, |
| <0x1885010 0x4>, |
| <0x188501c 0x4>, |
| <0x1886008 0x4>; |
| reg-names = "mbox-loc-addr", "mbox-loc-size", "irq-reg-base", |
| "irq-rx-reset"; |
| qcom,irq-mask = <0x1>; |
| interrupts = <0 348 4>; |
| label = "spss"; |
| qcom,tx-ring-size = <0x400>; |
| qcom,rx-ring-size = <0x400>; |
| }; |
| |
| apps_rsc: mailbox@179e0000 { |
| compatible = "qcom,tcs-drv"; |
| reg = <0x179e0000 0x100>, <0x179e0d00 0x3000>; |
| interrupts = <0 5 0>; |
| #mbox-cells = <1>; |
| qcom,drv-id = <2>; |
| qcom,tcs-config = <SLEEP_TCS 3>, |
| <WAKE_TCS 3>, |
| <ACTIVE_TCS 2>, |
| <CONTROL_TCS 1>; |
| }; |
| |
| disp_rsc: mailbox@af20000 { |
| status = "disabled"; |
| compatible = "qcom,tcs-drv"; |
| reg = <0xaf20000 0x100>, <0xaf21c00 0x3000>; |
| interrupts = <0 129 0>; |
| #mbox-cells = <1>; |
| qcom,drv-id = <0>; |
| qcom,tcs-config = <SLEEP_TCS 1>, |
| <WAKE_TCS 1>, |
| <ACTIVE_TCS 0>, |
| <CONTROL_TCS 1>; |
| }; |
| |
| system_pm { |
| compatible = "qcom,system-pm"; |
| mboxes = <&apps_rsc 0>; |
| }; |
| |
| qcom,glink-smem-native-xprt-modem@86000000 { |
| compatible = "qcom,glink-smem-native-xprt"; |
| reg = <0x86000000 0x200000>, |
| <0x1799000c 0x4>; |
| reg-names = "smem", "irq-reg-base"; |
| qcom,irq-mask = <0x1000>; |
| interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; |
| label = "mpss"; |
| }; |
| |
| qcom,glink-smem-native-xprt-adsp@86000000 { |
| compatible = "qcom,glink-smem-native-xprt"; |
| reg = <0x86000000 0x200000>, |
| <0x1799000c 0x4>; |
| reg-names = "smem", "irq-reg-base"; |
| qcom,irq-mask = <0x100>; |
| interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; |
| label = "lpass"; |
| }; |
| |
| qcom,glink-smem-native-xprt-dsps@86000000 { |
| compatible = "qcom,glink-smem-native-xprt"; |
| reg = <0x86000000 0x200000>, |
| <0x1799000c 0x4>; |
| reg-names = "smem", "irq-reg-base"; |
| qcom,irq-mask = <0x1000000>; |
| interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; |
| label = "dsps"; |
| }; |
| |
| qcom,glink-smem-native-xprt-cdsp@86000000 { |
| compatible = "qcom,glink-smem-native-xprt"; |
| reg = <0x86000000 0x200000>, |
| <0x1799000c 0x4>; |
| reg-names = "smem", "irq-reg-base"; |
| qcom,irq-mask = <0x10>; |
| interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; |
| label = "cdsp"; |
| }; |
| |
| glink_mpss: qcom,glink-ssr-modem { |
| compatible = "qcom,glink_ssr"; |
| label = "modem"; |
| qcom,edge = "mpss"; |
| qcom,notify-edges = <&glink_lpass>, <&glink_dsps>, |
| <&glink_cdsp>, <&glink_spss>; |
| qcom,xprt = "smem"; |
| }; |
| |
| glink_lpass: qcom,glink-ssr-adsp { |
| compatible = "qcom,glink_ssr"; |
| label = "adsp"; |
| qcom,edge = "lpass"; |
| qcom,notify-edges = <&glink_mpss>, <&glink_dsps>, <&glink_cdsp>; |
| qcom,xprt = "smem"; |
| }; |
| |
| glink_dsps: qcom,glink-ssr-dsps { |
| compatible = "qcom,glink_ssr"; |
| label = "slpi"; |
| qcom,edge = "dsps"; |
| qcom,notify-edges = <&glink_mpss>, <&glink_lpass>, |
| <&glink_cdsp>; |
| qcom,xprt = "smem"; |
| }; |
| |
| glink_cdsp: qcom,glink-ssr-cdsp { |
| compatible = "qcom,glink_ssr"; |
| label = "cdsp"; |
| qcom,edge = "cdsp"; |
| qcom,notify-edges = <&glink_mpss>, <&glink_lpass>, |
| <&glink_dsps>; |
| qcom,xprt = "smem"; |
| }; |
| |
| glink_spss: qcom,glink-ssr-spss { |
| compatible = "qcom,glink_ssr"; |
| label = "spss"; |
| qcom,edge = "spss"; |
| qcom,notify-edges = <&glink_mpss>; |
| qcom,xprt = "mailbox"; |
| }; |
| |
| qcom,ipc_router { |
| compatible = "qcom,ipc_router"; |
| qcom,node-id = <1>; |
| }; |
| |
| qcom,ipc_router_modem_xprt { |
| compatible = "qcom,ipc_router_glink_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "mpss"; |
| qcom,glink-xprt = "smem"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,ipc_router_q6_xprt { |
| compatible = "qcom,ipc_router_glink_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "lpass"; |
| qcom,glink-xprt = "smem"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,ipc_router_dsps_xprt { |
| compatible = "qcom,ipc_router_glink_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "dsps"; |
| qcom,glink-xprt = "smem"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,ipc_router_cdsp_xprt { |
| compatible = "qcom,ipc_router_glink_xprt"; |
| qcom,ch-name = "IPCRTR"; |
| qcom,xprt-remote = "cdsp"; |
| qcom,glink-xprt = "smem"; |
| qcom,xprt-linkid = <1>; |
| qcom,xprt-version = <1>; |
| qcom,fragmented-data; |
| }; |
| |
| qcom,glink_pkt { |
| compatible = "qcom,glinkpkt"; |
| |
| qcom,glinkpkt-at-mdm0 { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "mpss"; |
| qcom,glinkpkt-ch-name = "DS"; |
| qcom,glinkpkt-dev-name = "at_mdm0"; |
| }; |
| |
| qcom,glinkpkt-loopback_cntl { |
| qcom,glinkpkt-transport = "lloop"; |
| qcom,glinkpkt-edge = "local"; |
| qcom,glinkpkt-ch-name = "LOCAL_LOOPBACK_CLNT"; |
| qcom,glinkpkt-dev-name = "glink_pkt_loopback_ctrl"; |
| }; |
| |
| qcom,glinkpkt-loopback_data { |
| qcom,glinkpkt-transport = "lloop"; |
| qcom,glinkpkt-edge = "local"; |
| qcom,glinkpkt-ch-name = "glink_pkt_lloop_CLNT"; |
| qcom,glinkpkt-dev-name = "glink_pkt_loopback"; |
| }; |
| |
| qcom,glinkpkt-apr-apps2 { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "adsp"; |
| qcom,glinkpkt-ch-name = "apr_apps2"; |
| qcom,glinkpkt-dev-name = "apr_apps2"; |
| }; |
| |
| qcom,glinkpkt-data40-cntl { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "mpss"; |
| qcom,glinkpkt-ch-name = "DATA40_CNTL"; |
| qcom,glinkpkt-dev-name = "smdcntl8"; |
| }; |
| |
| qcom,glinkpkt-data1 { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "mpss"; |
| qcom,glinkpkt-ch-name = "DATA1"; |
| qcom,glinkpkt-dev-name = "smd7"; |
| }; |
| |
| qcom,glinkpkt-data4 { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "mpss"; |
| qcom,glinkpkt-ch-name = "DATA4"; |
| qcom,glinkpkt-dev-name = "smd8"; |
| }; |
| |
| qcom,glinkpkt-data11 { |
| qcom,glinkpkt-transport = "smem"; |
| qcom,glinkpkt-edge = "mpss"; |
| qcom,glinkpkt-ch-name = "DATA11"; |
| qcom,glinkpkt-dev-name = "smd11"; |
| }; |
| }; |
| |
| qcom,msm_gsi { |
| compatible = "qcom,msm_gsi"; |
| }; |
| |
| qcom,rmnet-ipa { |
| compatible = "qcom,rmnet-ipa3"; |
| qcom,rmnet-ipa-ssr; |
| qcom,ipa-loaduC; |
| qcom,ipa-advertise-sg-support; |
| }; |
| |
| ipa_hw: qcom,ipa@01e00000 { |
| compatible = "qcom,ipa"; |
| reg = <0x1e00000 0x34000>, |
| <0x1e04000 0x2c000>; |
| reg-names = "ipa-base", "gsi-base"; |
| interrupts = |
| <0 311 0>, |
| <0 432 0>; |
| interrupt-names = "ipa-irq", "gsi-irq"; |
| qcom,ipa-hw-ver = <13>; /* IPA core version = IPAv3.5.1 */ |
| qcom,ipa-hw-mode = <1>; |
| qcom,ee = <0>; |
| qcom,use-gsi; |
| qcom,use-ipa-tethering-bridge; |
| qcom,modem-cfg-emb-pipe-flt; |
| qcom,ipa-wdi2; |
| qcom,use-64-bit-dma-mask; |
| clock-names = "core_clk"; |
| clocks = <&clock_gcc 0xfa685cda>; |
| qcom,msm-bus,name = "ipa"; |
| qcom,msm-bus,num-cases = <4>; |
| qcom,msm-bus,num-paths = <3>; |
| qcom,msm-bus,vectors-KBps = |
| /* No vote */ |
| <90 512 0 0>, |
| <90 585 0 0>, |
| <1 676 0 0>, |
| /* SVS */ |
| <90 512 80000 640000>, |
| <90 585 80000 640000>, |
| <1 676 80000 80000>, |
| /* NOMINAL */ |
| <90 512 206000 960000>, |
| <90 585 206000 960000>, |
| <1 676 206000 160000>, |
| /* TURBO */ |
| <90 512 206000 3600000>, |
| <90 585 206000 3600000>, |
| <1 676 206000 300000>; |
| qcom,bus-vector-names = "MIN", "SVS", "NOMINAL", "TURBO"; |
| |
| /* IPA RAM mmap */ |
| qcom,ipa-ram-mmap = < |
| 0x280 /* ofst_start; */ |
| 0x0 /* nat_ofst; */ |
| 0x0 /* nat_size; */ |
| 0x288 /* v4_flt_hash_ofst; */ |
| 0x78 /* v4_flt_hash_size; */ |
| 0x4000 /* v4_flt_hash_size_ddr; */ |
| 0x308 /* v4_flt_nhash_ofst; */ |
| 0x78 /* v4_flt_nhash_size; */ |
| 0x4000 /* v4_flt_nhash_size_ddr; */ |
| 0x388 /* v6_flt_hash_ofst; */ |
| 0x78 /* v6_flt_hash_size; */ |
| 0x4000 /* v6_flt_hash_size_ddr; */ |
| 0x408 /* v6_flt_nhash_ofst; */ |
| 0x78 /* v6_flt_nhash_size; */ |
| 0x4000 /* v6_flt_nhash_size_ddr; */ |
| 0xf /* v4_rt_num_index; */ |
| 0x0 /* v4_modem_rt_index_lo; */ |
| 0x7 /* v4_modem_rt_index_hi; */ |
| 0x8 /* v4_apps_rt_index_lo; */ |
| 0xe /* v4_apps_rt_index_hi; */ |
| 0x488 /* v4_rt_hash_ofst; */ |
| 0x78 /* v4_rt_hash_size; */ |
| 0x4000 /* v4_rt_hash_size_ddr; */ |
| 0x508 /* v4_rt_nhash_ofst; */ |
| 0x78 /* v4_rt_nhash_size; */ |
| 0x4000 /* v4_rt_nhash_size_ddr; */ |
| 0xf /* v6_rt_num_index; */ |
| 0x0 /* v6_modem_rt_index_lo; */ |
| 0x7 /* v6_modem_rt_index_hi; */ |
| 0x8 /* v6_apps_rt_index_lo; */ |
| 0xe /* v6_apps_rt_index_hi; */ |
| 0x588 /* v6_rt_hash_ofst; */ |
| 0x78 /* v6_rt_hash_size; */ |
| 0x4000 /* v6_rt_hash_size_ddr; */ |
| 0x608 /* v6_rt_nhash_ofst; */ |
| 0x78 /* v6_rt_nhash_size; */ |
| 0x4000 /* v6_rt_nhash_size_ddr; */ |
| 0x688 /* modem_hdr_ofst; */ |
| 0x140 /* modem_hdr_size; */ |
| 0x7c8 /* apps_hdr_ofst; */ |
| 0x0 /* apps_hdr_size; */ |
| 0x800 /* apps_hdr_size_ddr; */ |
| 0x7d0 /* modem_hdr_proc_ctx_ofst; */ |
| 0x200 /* modem_hdr_proc_ctx_size; */ |
| 0x9d0 /* apps_hdr_proc_ctx_ofst; */ |
| 0x200 /* apps_hdr_proc_ctx_size; */ |
| 0x0 /* apps_hdr_proc_ctx_size_ddr; */ |
| 0x0 /* modem_comp_decomp_ofst; diff */ |
| 0x0 /* modem_comp_decomp_size; diff */ |
| 0xbd8 /* modem_ofst; */ |
| 0x1424 /* modem_size; */ |
| 0x1ffc /* apps_v4_flt_hash_ofst; */ |
| 0x0 /* apps_v4_flt_hash_size; */ |
| 0x1ffc /* apps_v4_flt_nhash_ofst; */ |
| 0x0 /* apps_v4_flt_nhash_size; */ |
| 0x1ffc /* apps_v6_flt_hash_ofst; */ |
| 0x0 /* apps_v6_flt_hash_size; */ |
| 0x1ffc /* apps_v6_flt_nhash_ofst; */ |
| 0x0 /* apps_v6_flt_nhash_size; */ |
| 0x80 /* uc_info_ofst; */ |
| 0x200 /* uc_info_size; */ |
| 0x2000 /* end_ofst; */ |
| 0x1ffc /* apps_v4_rt_hash_ofst; */ |
| 0x0 /* apps_v4_rt_hash_size; */ |
| 0x1ffc /* apps_v4_rt_nhash_ofst; */ |
| 0x0 /* apps_v4_rt_nhash_size; */ |
| 0x1ffc /* apps_v6_rt_hash_ofst; */ |
| 0x0 /* apps_v6_rt_hash_size; */ |
| 0x1ffc /* apps_v6_rt_nhash_ofst; */ |
| 0x0 /* apps_v6_rt_nhash_size; */ |
| >; |
| }; |
| |
| qcom,chd_sliver { |
| compatible = "qcom,core-hang-detect"; |
| label = "silver"; |
| qcom,threshold-arr = <0x17e00058 0x17e10058 |
| 0x17e20058 0x17e30058>; |
| qcom,config-arr = <0x17e00060 0x17e10060 |
| 0x17e20060 0x17e30060>; |
| }; |
| |
| qcom,chd_gold { |
| compatible = "qcom,core-hang-detect"; |
| label = "gold"; |
| qcom,threshold-arr = <0x17e40058 0x17e50058 |
| 0x17e60058 0x17e70058>; |
| qcom,config-arr = <0x17e40060 0x17e50060 |
| 0x17e60060 0x17e70060>; |
| }; |
| |
| qcom,ghd { |
| compatible = "qcom,gladiator-hang-detect"; |
| qcom,threshold-arr = <0x1799041c 0x17990420>; |
| qcom,config-reg = <0x17990434>; |
| }; |
| |
| cmd_db: qcom,cmd-db@861e0000 { |
| compatible = "qcom,cmd-db"; |
| reg = <0x861e0000 0x4000>; |
| }; |
| }; |
| |
| &pcie_0_gdsc { |
| status = "ok"; |
| }; |
| |
| &pcie_1_gdsc { |
| status = "ok"; |
| }; |
| |
| &ufs_card_gdsc { |
| status = "ok"; |
| }; |
| |
| &ufs_phy_gdsc { |
| status = "ok"; |
| }; |
| |
| &usb30_prim_gdsc { |
| status = "ok"; |
| }; |
| |
| &usb30_sec_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_aggre_noc_mmu_tbu1_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_aggre_noc_mmu_tbu2_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc { |
| status = "ok"; |
| }; |
| |
| &hlos1_vote_mmnoc_mmu_tbu_sf_gdsc { |
| status = "ok"; |
| }; |
| |
| &bps_gdsc { |
| status = "ok"; |
| }; |
| |
| &ife_0_gdsc { |
| status = "ok"; |
| }; |
| |
| &ife_1_gdsc { |
| status = "ok"; |
| }; |
| |
| &ipe_0_gdsc { |
| status = "ok"; |
| }; |
| |
| &ipe_1_gdsc { |
| status = "ok"; |
| }; |
| |
| &titan_top_gdsc { |
| status = "ok"; |
| }; |
| |
| &mdss_core_gdsc { |
| status = "ok"; |
| }; |
| |
| &gpu_cx_gdsc { |
| status = "ok"; |
| }; |
| |
| &gpu_gx_gdsc { |
| parent-supply = <&pm8005_s1_level>; |
| status = "ok"; |
| }; |
| |
| &vcodec0_gdsc { |
| status = "ok"; |
| }; |
| |
| &vcodec1_gdsc { |
| status = "ok"; |
| }; |
| |
| &venus_gdsc { |
| status = "ok"; |
| }; |
| |
| #include "msmskunk-regulator.dtsi" |
| #include "msmskunk-coresight.dtsi" |
| #include "msm-arm-smmu-skunk.dtsi" |
| #include "msmskunk-ion.dtsi" |
| #include "msmskunk-smp2p.dtsi" |