| /* |
| * Copyright 2011 Freescale Semiconductor, Inc. |
| * Copyright 2011 Linaro Ltd. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| */ |
| |
| #include "skeleton.dtsi" |
| #include "imx53-pinfunc.h" |
| |
| / { |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| gpio4 = &gpio5; |
| gpio5 = &gpio6; |
| gpio6 = &gpio7; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| }; |
| |
| tzic: tz-interrupt-controller@0fffc000 { |
| compatible = "fsl,imx53-tzic", "fsl,tzic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x0fffc000 0x4000>; |
| }; |
| |
| clocks { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ckil { |
| compatible = "fsl,imx-ckil", "fixed-clock"; |
| clock-frequency = <32768>; |
| }; |
| |
| ckih1 { |
| compatible = "fsl,imx-ckih1", "fixed-clock"; |
| clock-frequency = <22579200>; |
| }; |
| |
| ckih2 { |
| compatible = "fsl,imx-ckih2", "fixed-clock"; |
| clock-frequency = <0>; |
| }; |
| |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&tzic>; |
| ranges; |
| |
| ipu: ipu@18000000 { |
| #crtc-cells = <1>; |
| compatible = "fsl,imx53-ipu"; |
| reg = <0x18000000 0x080000000>; |
| interrupts = <11 10>; |
| clocks = <&clks 59>, <&clks 110>, <&clks 61>; |
| clock-names = "bus", "di0", "di1"; |
| resets = <&src 2>; |
| }; |
| |
| aips@50000000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x10000000>; |
| ranges; |
| |
| spba@50000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x40000>; |
| ranges; |
| |
| esdhc1: esdhc@50004000 { |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50004000 0x4000>; |
| interrupts = <1>; |
| clocks = <&clks 44>, <&clks 0>, <&clks 71>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc2: esdhc@50008000 { |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50008000 0x4000>; |
| interrupts = <2>; |
| clocks = <&clks 45>, <&clks 0>, <&clks 72>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@5000c000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x5000c000 0x4000>; |
| interrupts = <33>; |
| clocks = <&clks 32>, <&clks 33>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ecspi1: ecspi@50010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x50010000 0x4000>; |
| interrupts = <36>; |
| clocks = <&clks 51>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@50014000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x50014000 0x4000>; |
| interrupts = <30>; |
| clocks = <&clks 49>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| esdhc3: esdhc@50020000 { |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50020000 0x4000>; |
| interrupts = <3>; |
| clocks = <&clks 46>, <&clks 0>, <&clks 73>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| esdhc4: esdhc@50024000 { |
| compatible = "fsl,imx53-esdhc"; |
| reg = <0x50024000 0x4000>; |
| interrupts = <4>; |
| clocks = <&clks 47>, <&clks 0>, <&clks 74>; |
| clock-names = "ipg", "ahb", "per"; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usbphy0: usbphy@0 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks 124>; |
| clock-names = "main_clk"; |
| status = "okay"; |
| }; |
| |
| usbphy1: usbphy@1 { |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clks 125>; |
| clock-names = "main_clk"; |
| status = "okay"; |
| }; |
| |
| usbotg: usb@53f80000 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80000 0x0200>; |
| interrupts = <18>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,usbphy = <&usbphy0>; |
| status = "disabled"; |
| }; |
| |
| usbh1: usb@53f80200 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80200 0x0200>; |
| interrupts = <14>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 1>; |
| fsl,usbphy = <&usbphy1>; |
| status = "disabled"; |
| }; |
| |
| usbh2: usb@53f80400 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80400 0x0200>; |
| interrupts = <16>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 2>; |
| status = "disabled"; |
| }; |
| |
| usbh3: usb@53f80600 { |
| compatible = "fsl,imx53-usb", "fsl,imx27-usb"; |
| reg = <0x53f80600 0x0200>; |
| interrupts = <17>; |
| clocks = <&clks 108>; |
| fsl,usbmisc = <&usbmisc 3>; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@53f80800 { |
| #index-cells = <1>; |
| compatible = "fsl,imx53-usbmisc"; |
| reg = <0x53f80800 0x200>; |
| clocks = <&clks 108>; |
| }; |
| |
| gpio1: gpio@53f84000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f84000 0x4000>; |
| interrupts = <50 51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@53f88000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f88000 0x4000>; |
| interrupts = <52 53>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio3: gpio@53f8c000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f8c000 0x4000>; |
| interrupts = <54 55>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio4: gpio@53f90000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f90000 0x4000>; |
| interrupts = <56 57>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| wdog1: wdog@53f98000 { |
| compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| reg = <0x53f98000 0x4000>; |
| interrupts = <58>; |
| clocks = <&clks 0>; |
| }; |
| |
| wdog2: wdog@53f9c000 { |
| compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; |
| reg = <0x53f9c000 0x4000>; |
| interrupts = <59>; |
| clocks = <&clks 0>; |
| status = "disabled"; |
| }; |
| |
| gpt: timer@53fa0000 { |
| compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; |
| reg = <0x53fa0000 0x4000>; |
| interrupts = <39>; |
| clocks = <&clks 36>, <&clks 41>; |
| clock-names = "ipg", "per"; |
| }; |
| |
| iomuxc: iomuxc@53fa8000 { |
| compatible = "fsl,imx53-iomuxc"; |
| reg = <0x53fa8000 0x4000>; |
| |
| audmux { |
| pinctrl_audmux_1: audmuxgrp-1 { |
| fsl,pins = < |
| MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 |
| MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 |
| MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 |
| MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 |
| >; |
| }; |
| |
| pinctrl_audmux_2: audmuxgrp-2 { |
| fsl,pins = < |
| MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC 0x80000000 |
| MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD 0x80000000 |
| MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS 0x80000000 |
| MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD 0x80000000 |
| >; |
| }; |
| |
| pinctrl_audmux_3: audmuxgrp-3 { |
| fsl,pins = < |
| MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC 0x80000000 |
| MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD 0x80000000 |
| MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS 0x80000000 |
| MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD 0x80000000 |
| >; |
| }; |
| }; |
| |
| fec { |
| pinctrl_fec_1: fecgrp-1 { |
| fsl,pins = < |
| MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 |
| MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 |
| MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 |
| MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 |
| MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 |
| MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 |
| MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 |
| MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 |
| MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 |
| MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 |
| >; |
| }; |
| |
| pinctrl_fec_2: fecgrp-2 { |
| fsl,pins = < |
| MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 |
| MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 |
| MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 |
| MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 |
| MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 |
| MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 |
| MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 |
| MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 |
| MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 |
| MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 |
| MX53_PAD_KEY_ROW1__FEC_COL 0x80000000 |
| MX53_PAD_KEY_COL3__FEC_CRS 0x80000000 |
| MX53_PAD_KEY_COL2__FEC_RDATA_2 0x80000000 |
| MX53_PAD_KEY_COL0__FEC_RDATA_3 0x80000000 |
| MX53_PAD_KEY_COL1__FEC_RX_CLK 0x80000000 |
| MX53_PAD_KEY_ROW2__FEC_TDATA_2 0x80000000 |
| MX53_PAD_GPIO_19__FEC_TDATA_3 0x80000000 |
| MX53_PAD_KEY_ROW0__FEC_TX_ER 0x80000000 |
| >; |
| }; |
| }; |
| |
| csi { |
| pinctrl_csi_1: csigrp-1 { |
| fsl,pins = < |
| MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1d5 |
| MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 |
| MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 |
| MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 |
| MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 |
| MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 |
| MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 |
| MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 |
| MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 |
| MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 |
| MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 |
| MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 |
| MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 0x1d5 |
| MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 0x1d5 |
| MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 0x1d5 |
| MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 0x1d5 |
| MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 0x1d5 |
| MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 0x1d5 |
| MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 0x1d5 |
| MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 0x1d5 |
| MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 |
| >; |
| }; |
| |
| pinctrl_csi_2: csigrp-2 { |
| fsl,pins = < |
| MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1d5 |
| MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1d5 |
| MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1d5 |
| MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1d5 |
| MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1d5 |
| MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1d5 |
| MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1d5 |
| MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1d5 |
| MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1d5 |
| MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1d5 |
| MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1d5 |
| >; |
| }; |
| }; |
| |
| cspi { |
| pinctrl_cspi_1: cspigrp-1 { |
| fsl,pins = < |
| MX53_PAD_SD1_DATA0__CSPI_MISO 0x1d5 |
| MX53_PAD_SD1_CMD__CSPI_MOSI 0x1d5 |
| MX53_PAD_SD1_CLK__CSPI_SCLK 0x1d5 |
| >; |
| }; |
| |
| pinctrl_cspi_2: cspigrp-2 { |
| fsl,pins = < |
| MX53_PAD_EIM_D22__CSPI_MISO 0x1d5 |
| MX53_PAD_EIM_D28__CSPI_MOSI 0x1d5 |
| MX53_PAD_EIM_D21__CSPI_SCLK 0x1d5 |
| >; |
| }; |
| }; |
| |
| ecspi1 { |
| pinctrl_ecspi1_1: ecspi1grp-1 { |
| fsl,pins = < |
| MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 |
| MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 |
| MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 |
| >; |
| }; |
| |
| pinctrl_ecspi1_2: ecspi1grp-2 { |
| fsl,pins = < |
| MX53_PAD_GPIO_19__ECSPI1_RDY 0x80000000 |
| MX53_PAD_EIM_EB2__ECSPI1_SS0 0x80000000 |
| MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 |
| MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 |
| MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 |
| MX53_PAD_EIM_D19__ECSPI1_SS1 0x80000000 |
| >; |
| }; |
| }; |
| |
| ecspi2 { |
| pinctrl_ecspi2_1: ecspi2grp-1 { |
| fsl,pins = < |
| MX53_PAD_EIM_OE__ECSPI2_MISO 0x80000000 |
| MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x80000000 |
| MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x80000000 |
| >; |
| }; |
| }; |
| |
| esdhc1 { |
| pinctrl_esdhc1_1: esdhc1grp-1 { |
| fsl,pins = < |
| MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| >; |
| }; |
| |
| pinctrl_esdhc1_2: esdhc1grp-2 { |
| fsl,pins = < |
| MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 |
| MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 |
| MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 |
| MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 |
| MX53_PAD_PATA_DATA8__ESDHC1_DAT4 0x1d5 |
| MX53_PAD_PATA_DATA9__ESDHC1_DAT5 0x1d5 |
| MX53_PAD_PATA_DATA10__ESDHC1_DAT6 0x1d5 |
| MX53_PAD_PATA_DATA11__ESDHC1_DAT7 0x1d5 |
| MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 |
| MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 |
| >; |
| }; |
| }; |
| |
| esdhc2 { |
| pinctrl_esdhc2_1: esdhc2grp-1 { |
| fsl,pins = < |
| MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5 |
| MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5 |
| MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5 |
| MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5 |
| MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5 |
| MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5 |
| >; |
| }; |
| }; |
| |
| esdhc3 { |
| pinctrl_esdhc3_1: esdhc3grp-1 { |
| fsl,pins = < |
| MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 |
| MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 |
| MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 |
| MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 |
| MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 |
| MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 |
| MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 |
| MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 |
| MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 |
| MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 |
| >; |
| }; |
| }; |
| |
| can1 { |
| pinctrl_can1_1: can1grp-1 { |
| fsl,pins = < |
| MX53_PAD_PATA_INTRQ__CAN1_TXCAN 0x80000000 |
| MX53_PAD_PATA_DIOR__CAN1_RXCAN 0x80000000 |
| >; |
| }; |
| |
| pinctrl_can1_2: can1grp-2 { |
| fsl,pins = < |
| MX53_PAD_KEY_COL2__CAN1_TXCAN 0x80000000 |
| MX53_PAD_KEY_ROW2__CAN1_RXCAN 0x80000000 |
| >; |
| }; |
| |
| pinctrl_can1_3: can1grp-3 { |
| fsl,pins = < |
| MX53_PAD_GPIO_7__CAN1_TXCAN 0x80000000 |
| MX53_PAD_GPIO_8__CAN1_RXCAN 0x80000000 |
| >; |
| }; |
| }; |
| |
| can2 { |
| pinctrl_can2_1: can2grp-1 { |
| fsl,pins = < |
| MX53_PAD_KEY_COL4__CAN2_TXCAN 0x80000000 |
| MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x80000000 |
| >; |
| }; |
| }; |
| |
| i2c1 { |
| pinctrl_i2c1_1: i2c1grp-1 { |
| fsl,pins = < |
| MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 |
| MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 |
| >; |
| }; |
| |
| pinctrl_i2c1_2: i2c1grp-2 { |
| fsl,pins = < |
| MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000 |
| MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 |
| >; |
| }; |
| }; |
| |
| i2c2 { |
| pinctrl_i2c2_1: i2c2grp-1 { |
| fsl,pins = < |
| MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 |
| MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000 |
| >; |
| }; |
| |
| pinctrl_i2c2_2: i2c2grp-2 { |
| fsl,pins = < |
| MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 |
| MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 |
| >; |
| }; |
| }; |
| |
| i2c3 { |
| pinctrl_i2c3_1: i2c3grp-1 { |
| fsl,pins = < |
| MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 |
| MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000 |
| >; |
| }; |
| }; |
| |
| ipu_disp0 { |
| pinctrl_ipu_disp0_1: ipudisp0grp-1 { |
| fsl,pins = < |
| MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK 0x5 |
| MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 0x5 |
| MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 0x5 |
| MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 0x5 |
| MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 0x5 |
| MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 0x5 |
| MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 0x5 |
| MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 0x5 |
| MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 0x5 |
| MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 0x5 |
| MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 0x5 |
| MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 0x5 |
| MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 0x5 |
| MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 0x5 |
| MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 0x5 |
| MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 0x5 |
| MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 0x5 |
| MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 0x5 |
| MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 0x5 |
| MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 0x5 |
| MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 0x5 |
| MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 0x5 |
| MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 0x5 |
| MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 0x5 |
| MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 0x5 |
| MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 0x5 |
| MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 0x5 |
| MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5 |
| >; |
| }; |
| }; |
| |
| ipu_disp1 { |
| pinctrl_ipu_disp1_1: ipudisp1grp-1 { |
| fsl,pins = < |
| MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x5 |
| MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x5 |
| MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x5 |
| MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x5 |
| MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x5 |
| MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x5 |
| MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x5 |
| MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x5 |
| MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x5 |
| MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x5 |
| MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x5 |
| MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x5 |
| MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x5 |
| MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x5 |
| MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x5 |
| MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x5 |
| MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x5 |
| MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x5 |
| MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x5 |
| MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x5 |
| MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x5 |
| MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x5 |
| MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x5 |
| MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x5 |
| MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x5 |
| MX53_PAD_EIM_DA13__IPU_DI1_D0_CS 0x5 |
| MX53_PAD_EIM_DA14__IPU_DI1_D1_CS 0x5 |
| MX53_PAD_EIM_DA15__IPU_DI1_PIN1 0x5 |
| MX53_PAD_EIM_DA11__IPU_DI1_PIN2 0x5 |
| MX53_PAD_EIM_DA12__IPU_DI1_PIN3 0x5 |
| MX53_PAD_EIM_A25__IPU_DI1_PIN12 0x5 |
| MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 |
| >; |
| }; |
| }; |
| |
| ipu_disp2 { |
| pinctrl_ipu_disp2_1: ipudisp2grp-1 { |
| fsl,pins = < |
| MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000 |
| MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000 |
| MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000 |
| MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000 |
| MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000 |
| MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000 |
| MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000 |
| MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000 |
| MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000 |
| MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000 |
| >; |
| }; |
| }; |
| |
| nand { |
| pinctrl_nand_1: nandgrp-1 { |
| fsl,pins = < |
| MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 |
| MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 |
| MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 |
| MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 |
| MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 |
| MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 |
| MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 |
| MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 |
| MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 |
| MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 |
| MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 |
| MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 |
| MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 |
| MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 |
| MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 |
| >; |
| }; |
| }; |
| |
| owire { |
| pinctrl_owire_1: owiregrp-1 { |
| fsl,pins = < |
| MX53_PAD_GPIO_18__OWIRE_LINE 0x80000000 |
| >; |
| }; |
| }; |
| |
| pwm1 { |
| pinctrl_pwm1_1: pwm1grp-1 { |
| fsl,pins = < |
| MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 |
| >; |
| }; |
| }; |
| |
| pwm2 { |
| pinctrl_pwm2_1: pwm2grp-1 { |
| fsl,pins = < |
| MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 |
| >; |
| }; |
| }; |
| |
| uart1 { |
| pinctrl_uart1_1: uart1grp-1 { |
| fsl,pins = < |
| MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5 |
| MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5 |
| >; |
| }; |
| |
| pinctrl_uart1_2: uart1grp-2 { |
| fsl,pins = < |
| MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1c5 |
| MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5 |
| >; |
| }; |
| |
| pinctrl_uart1_3: uart1grp-3 { |
| fsl,pins = < |
| MX53_PAD_PATA_RESET_B__UART1_CTS 0x1c5 |
| MX53_PAD_PATA_IORDY__UART1_RTS 0x1c5 |
| >; |
| }; |
| }; |
| |
| uart2 { |
| pinctrl_uart2_1: uart2grp-1 { |
| fsl,pins = < |
| MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 |
| MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 |
| >; |
| }; |
| |
| pinctrl_uart2_2: uart2grp-2 { |
| fsl,pins = < |
| MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5 |
| MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1c5 |
| MX53_PAD_PATA_DIOR__UART2_RTS 0x1c5 |
| MX53_PAD_PATA_INTRQ__UART2_CTS 0x1c5 |
| >; |
| }; |
| }; |
| |
| uart3 { |
| pinctrl_uart3_1: uart3grp-1 { |
| fsl,pins = < |
| MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 |
| MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 |
| MX53_PAD_PATA_DA_1__UART3_CTS 0x1c5 |
| MX53_PAD_PATA_DA_2__UART3_RTS 0x1c5 |
| >; |
| }; |
| |
| pinctrl_uart3_2: uart3grp-2 { |
| fsl,pins = < |
| MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5 |
| MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5 |
| >; |
| }; |
| |
| }; |
| |
| uart4 { |
| pinctrl_uart4_1: uart4grp-1 { |
| fsl,pins = < |
| MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5 |
| MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5 |
| >; |
| }; |
| }; |
| |
| uart5 { |
| pinctrl_uart5_1: uart5grp-1 { |
| fsl,pins = < |
| MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5 |
| MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5 |
| >; |
| }; |
| }; |
| }; |
| |
| gpr: iomuxc-gpr@53fa8000 { |
| compatible = "fsl,imx53-iomuxc-gpr", "syscon"; |
| reg = <0x53fa8000 0xc>; |
| }; |
| |
| ldb: ldb@53fa8008 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-ldb"; |
| reg = <0x53fa8008 0x4>; |
| gpr = <&gpr>; |
| clocks = <&clks 122>, <&clks 120>, |
| <&clks 115>, <&clks 116>, |
| <&clks 123>, <&clks 85>; |
| clock-names = "di0_pll", "di1_pll", |
| "di0_sel", "di1_sel", |
| "di0", "di1"; |
| status = "disabled"; |
| |
| lvds-channel@0 { |
| reg = <0>; |
| crtcs = <&ipu 0>; |
| status = "disabled"; |
| }; |
| |
| lvds-channel@1 { |
| reg = <1>; |
| crtcs = <&ipu 1>; |
| status = "disabled"; |
| }; |
| }; |
| |
| pwm1: pwm@53fb4000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; |
| reg = <0x53fb4000 0x4000>; |
| clocks = <&clks 37>, <&clks 38>; |
| clock-names = "ipg", "per"; |
| interrupts = <61>; |
| }; |
| |
| pwm2: pwm@53fb8000 { |
| #pwm-cells = <2>; |
| compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; |
| reg = <0x53fb8000 0x4000>; |
| clocks = <&clks 39>, <&clks 40>; |
| clock-names = "ipg", "per"; |
| interrupts = <94>; |
| }; |
| |
| uart1: serial@53fbc000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53fbc000 0x4000>; |
| interrupts = <31>; |
| clocks = <&clks 28>, <&clks 29>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@53fc0000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53fc0000 0x4000>; |
| interrupts = <32>; |
| clocks = <&clks 30>, <&clks 31>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| can1: can@53fc8000 { |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fc8000 0x4000>; |
| interrupts = <82>; |
| clocks = <&clks 158>, <&clks 157>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| can2: can@53fcc000 { |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; |
| reg = <0x53fcc000 0x4000>; |
| interrupts = <83>; |
| clocks = <&clks 87>, <&clks 86>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| src: src@53fd0000 { |
| compatible = "fsl,imx53-src", "fsl,imx51-src"; |
| reg = <0x53fd0000 0x4000>; |
| #reset-cells = <1>; |
| }; |
| |
| clks: ccm@53fd4000{ |
| compatible = "fsl,imx53-ccm"; |
| reg = <0x53fd4000 0x4000>; |
| interrupts = <0 71 0x04 0 72 0x04>; |
| #clock-cells = <1>; |
| }; |
| |
| gpio5: gpio@53fdc000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fdc000 0x4000>; |
| interrupts = <103 104>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio6: gpio@53fe0000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fe0000 0x4000>; |
| interrupts = <105 106>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio7: gpio@53fe4000 { |
| compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fe4000 0x4000>; |
| interrupts = <107 108>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| i2c3: i2c@53fec000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x53fec000 0x4000>; |
| interrupts = <64>; |
| clocks = <&clks 88>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@53ff0000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x53ff0000 0x4000>; |
| interrupts = <13>; |
| clocks = <&clks 65>, <&clks 66>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| }; |
| |
| aips@60000000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x60000000 0x10000000>; |
| ranges; |
| |
| uart5: serial@63f90000 { |
| compatible = "fsl,imx53-uart", "fsl,imx21-uart"; |
| reg = <0x63f90000 0x4000>; |
| interrupts = <86>; |
| clocks = <&clks 67>, <&clks 68>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| owire: owire@63fa4000 { |
| compatible = "fsl,imx53-owire", "fsl,imx21-owire"; |
| reg = <0x63fa4000 0x4000>; |
| clocks = <&clks 159>; |
| status = "disabled"; |
| }; |
| |
| ecspi2: ecspi@63fac000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; |
| reg = <0x63fac000 0x4000>; |
| interrupts = <37>; |
| clocks = <&clks 53>, <&clks 54>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| sdma: sdma@63fb0000 { |
| compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; |
| reg = <0x63fb0000 0x4000>; |
| interrupts = <6>; |
| clocks = <&clks 56>, <&clks 56>; |
| clock-names = "ipg", "ahb"; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; |
| }; |
| |
| cspi: cspi@63fc0000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; |
| reg = <0x63fc0000 0x4000>; |
| interrupts = <38>; |
| clocks = <&clks 55>, <&clks 55>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@63fc4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x63fc4000 0x4000>; |
| interrupts = <63>; |
| clocks = <&clks 35>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@63fc8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; |
| reg = <0x63fc8000 0x4000>; |
| interrupts = <62>; |
| clocks = <&clks 34>; |
| status = "disabled"; |
| }; |
| |
| ssi1: ssi@63fcc000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x63fcc000 0x4000>; |
| interrupts = <29>; |
| clocks = <&clks 48>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| audmux: audmux@63fd0000 { |
| compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; |
| reg = <0x63fd0000 0x4000>; |
| status = "disabled"; |
| }; |
| |
| nfc: nand@63fdb000 { |
| compatible = "fsl,imx53-nand"; |
| reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; |
| interrupts = <8>; |
| clocks = <&clks 60>; |
| status = "disabled"; |
| }; |
| |
| ssi3: ssi@63fe8000 { |
| compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; |
| reg = <0x63fe8000 0x4000>; |
| interrupts = <96>; |
| clocks = <&clks 50>; |
| fsl,fifo-depth = <15>; |
| fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ |
| status = "disabled"; |
| }; |
| |
| fec: ethernet@63fec000 { |
| compatible = "fsl,imx53-fec", "fsl,imx25-fec"; |
| reg = <0x63fec000 0x4000>; |
| interrupts = <87>; |
| clocks = <&clks 42>, <&clks 42>, <&clks 42>; |
| clock-names = "ipg", "ahb", "ptp"; |
| status = "disabled"; |
| }; |
| |
| tve: tve@63ff0000 { |
| compatible = "fsl,imx53-tve"; |
| reg = <0x63ff0000 0x1000>; |
| interrupts = <92>; |
| clocks = <&clks 69>, <&clks 116>; |
| clock-names = "tve", "di_sel"; |
| crtcs = <&ipu 1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |