| /* |
| * acpi_ec.c - ACPI Embedded Controller Driver ($Revision: 38 $) |
| * |
| * Copyright (C) 2004 Luming Yu <luming.yu@intel.com> |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/interrupt.h> |
| #include <asm/io.h> |
| #include <acpi/acpi_bus.h> |
| #include <acpi/acpi_drivers.h> |
| #include <acpi/actypes.h> |
| |
| #define _COMPONENT ACPI_EC_COMPONENT |
| ACPI_MODULE_NAME("acpi_ec") |
| #define ACPI_EC_COMPONENT 0x00100000 |
| #define ACPI_EC_CLASS "embedded_controller" |
| #define ACPI_EC_HID "PNP0C09" |
| #define ACPI_EC_DRIVER_NAME "ACPI Embedded Controller Driver" |
| #define ACPI_EC_DEVICE_NAME "Embedded Controller" |
| #define ACPI_EC_FILE_INFO "info" |
| |
| #undef PREFIX |
| #define PREFIX "ACPI: EC: " |
| |
| /* EC status register */ |
| #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ |
| #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ |
| #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */ |
| #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */ |
| |
| /* EC commands */ |
| #define ACPI_EC_COMMAND_READ 0x80 |
| #define ACPI_EC_COMMAND_WRITE 0x81 |
| #define ACPI_EC_BURST_ENABLE 0x82 |
| #define ACPI_EC_BURST_DISABLE 0x83 |
| #define ACPI_EC_COMMAND_QUERY 0x84 |
| |
| /* EC events */ |
| enum { |
| ACPI_EC_EVENT_OBF_1 = 1, /* Output buffer full */ |
| ACPI_EC_EVENT_IBF_0, /* Input buffer empty */ |
| }; |
| |
| #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */ |
| #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ |
| #define ACPI_EC_UDELAY 100 /* Poll @ 100us increments */ |
| #define ACPI_EC_UDELAY_COUNT 1000 /* Wait 100ms max. during EC ops */ |
| |
| enum { |
| EC_INTR = 1, /* Output buffer full */ |
| EC_POLL, /* Input buffer empty */ |
| }; |
| |
| static int acpi_ec_remove(struct acpi_device *device, int type); |
| static int acpi_ec_start(struct acpi_device *device); |
| static int acpi_ec_stop(struct acpi_device *device, int type); |
| static int acpi_ec_add(struct acpi_device *device); |
| |
| static struct acpi_driver acpi_ec_driver = { |
| .name = ACPI_EC_DRIVER_NAME, |
| .class = ACPI_EC_CLASS, |
| .ids = ACPI_EC_HID, |
| .ops = { |
| .add = acpi_ec_add, |
| .remove = acpi_ec_remove, |
| .start = acpi_ec_start, |
| .stop = acpi_ec_stop, |
| }, |
| }; |
| |
| /* If we find an EC via the ECDT, we need to keep a ptr to its context */ |
| struct acpi_ec { |
| acpi_handle handle; |
| unsigned long uid; |
| unsigned long gpe_bit; |
| unsigned long command_addr; |
| unsigned long data_addr; |
| unsigned long global_lock; |
| struct mutex lock; |
| atomic_t query_pending; |
| atomic_t leaving_burst; /* 0 : No, 1 : Yes, 2: abort */ |
| wait_queue_head_t wait; |
| } *ec_ecdt; |
| |
| /* External interfaces use first EC only, so remember */ |
| static struct acpi_device *first_ec; |
| static int acpi_ec_mode = EC_INTR; |
| |
| /* -------------------------------------------------------------------------- |
| Transaction Management |
| -------------------------------------------------------------------------- */ |
| |
| static inline u8 acpi_ec_read_status(struct acpi_ec *ec) |
| { |
| return inb(ec->command_addr); |
| } |
| |
| static inline u8 acpi_ec_read_data(struct acpi_ec *ec) |
| { |
| return inb(ec->data_addr); |
| } |
| |
| static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) |
| { |
| outb(command, ec->command_addr); |
| } |
| |
| static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) |
| { |
| outb(data, ec->data_addr); |
| } |
| |
| static int acpi_ec_check_status(struct acpi_ec *ec, u8 event) |
| { |
| u8 status = acpi_ec_read_status(ec); |
| switch (event) { |
| case ACPI_EC_EVENT_OBF_1: |
| if (status & ACPI_EC_FLAG_OBF) |
| return 1; |
| break; |
| case ACPI_EC_EVENT_IBF_0: |
| if (!(status & ACPI_EC_FLAG_IBF)) |
| return 1; |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_ec_wait(struct acpi_ec *ec, u8 event) |
| { |
| if (acpi_ec_mode == EC_POLL) { |
| int i; |
| for (i = 0; i < ACPI_EC_UDELAY_COUNT; ++i) { |
| if (acpi_ec_check_status(ec, event)) |
| return 0; |
| udelay(ACPI_EC_UDELAY); |
| } |
| } else { |
| if (wait_event_timeout(ec->wait, |
| acpi_ec_check_status(ec, event), |
| msecs_to_jiffies(ACPI_EC_DELAY)) || |
| acpi_ec_check_status(ec, event)) { |
| return 0; |
| } else { |
| printk(KERN_ERR PREFIX "acpi_ec_wait timeout," |
| " status = %d, expect_event = %d\n", |
| acpi_ec_read_status(ec), event); |
| } |
| } |
| |
| return -ETIME; |
| } |
| |
| #ifdef ACPI_FUTURE_USAGE |
| /* |
| * Note: samsung nv5000 doesn't work with ec burst mode. |
| * http://bugzilla.kernel.org/show_bug.cgi?id=4980 |
| */ |
| int acpi_ec_enter_burst_mode(struct acpi_ec *ec) |
| { |
| u8 tmp = 0; |
| u8 status = 0; |
| |
| |
| status = acpi_ec_read_status(ec); |
| if (status != -EINVAL && !(status & ACPI_EC_FLAG_BURST)) { |
| status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| if (status) |
| goto end; |
| acpi_ec_write_cmd(ec, ACPI_EC_BURST_ENABLE); |
| status = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1); |
| tmp = acpi_ec_read_data(ec); |
| if (tmp != 0x90) { /* Burst ACK byte */ |
| return -EINVAL; |
| } |
| } |
| |
| atomic_set(&ec->leaving_burst, 0); |
| return 0; |
| end: |
| ACPI_EXCEPTION((AE_INFO, status, "EC wait, burst mode")); |
| return -1; |
| } |
| |
| int acpi_ec_leave_burst_mode(struct acpi_ec *ec) |
| { |
| u8 status = 0; |
| |
| |
| status = acpi_ec_read_status(ec); |
| if (status != -EINVAL && (status & ACPI_EC_FLAG_BURST)){ |
| status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| if(status) |
| goto end; |
| acpi_ec_write_cmd(ec, ACPI_EC_BURST_DISABLE); |
| acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| } |
| atomic_set(&ec->leaving_burst, 1); |
| return 0; |
| end: |
| ACPI_EXCEPTION((AE_INFO, status, "EC leave burst mode")); |
| return -1; |
| } |
| #endif /* ACPI_FUTURE_USAGE */ |
| |
| static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command, |
| const u8 *wdata, unsigned wdata_len, |
| u8 *rdata, unsigned rdata_len) |
| { |
| int result = 0; |
| |
| acpi_ec_write_cmd(ec, command); |
| |
| for (; wdata_len > 0; wdata_len --) { |
| result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| if (result) { |
| printk(KERN_ERR PREFIX "write_cmd timeout, command = %d\n", |
| command); |
| goto end; |
| } |
| acpi_ec_write_data(ec, *(wdata++)); |
| } |
| |
| if (!rdata_len) { |
| result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| if (result) { |
| printk(KERN_ERR PREFIX "finish-write timeout, command = %d\n", |
| command); |
| goto end; |
| } |
| } else if (command == ACPI_EC_COMMAND_QUERY) { |
| atomic_set(&ec->query_pending, 0); |
| } |
| |
| for (; rdata_len > 0; rdata_len --) { |
| result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1); |
| if (result) { |
| printk(KERN_ERR PREFIX "read timeout, command = %d\n", |
| command); |
| goto end; |
| } |
| |
| *(rdata++) = acpi_ec_read_data(ec); |
| } |
| end: |
| return result; |
| } |
| |
| static int acpi_ec_transaction(struct acpi_ec *ec, u8 command, |
| const u8 *wdata, unsigned wdata_len, |
| u8 *rdata, unsigned rdata_len) |
| { |
| int status; |
| u32 glk; |
| |
| if (!ec || (wdata_len && !wdata) || (rdata_len && !rdata)) |
| return -EINVAL; |
| |
| if (rdata) |
| memset(rdata, 0, rdata_len); |
| |
| if (ec->global_lock) { |
| status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| } |
| mutex_lock(&ec->lock); |
| |
| /* Make sure GPE is enabled before doing transaction */ |
| acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR); |
| |
| status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0); |
| if (status) { |
| printk(KERN_DEBUG PREFIX "read EC, IB not empty\n"); |
| goto end; |
| } |
| |
| status = acpi_ec_transaction_unlocked(ec, command, |
| wdata, wdata_len, |
| rdata, rdata_len); |
| |
| end: |
| mutex_unlock(&ec->lock); |
| |
| if (ec->global_lock) |
| acpi_release_global_lock(glk); |
| |
| return status; |
| } |
| |
| static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data) |
| { |
| int result; |
| u8 d; |
| |
| result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_READ, |
| &address, 1, &d, 1); |
| *data = d; |
| return result; |
| } |
| |
| static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data) |
| { |
| u8 wdata[2] = { address, data }; |
| return acpi_ec_transaction(ec, ACPI_EC_COMMAND_WRITE, |
| wdata, 2, NULL, 0); |
| } |
| |
| /* |
| * Externally callable EC access functions. For now, assume 1 EC only |
| */ |
| int ec_read(u8 addr, u8 *val) |
| { |
| struct acpi_ec *ec; |
| int err; |
| u8 temp_data; |
| |
| if (!first_ec) |
| return -ENODEV; |
| |
| ec = acpi_driver_data(first_ec); |
| |
| err = acpi_ec_read(ec, addr, &temp_data); |
| |
| if (!err) { |
| *val = temp_data; |
| return 0; |
| } else |
| return err; |
| } |
| |
| EXPORT_SYMBOL(ec_read); |
| |
| int ec_write(u8 addr, u8 val) |
| { |
| struct acpi_ec *ec; |
| int err; |
| |
| if (!first_ec) |
| return -ENODEV; |
| |
| ec = acpi_driver_data(first_ec); |
| |
| err = acpi_ec_write(ec, addr, val); |
| |
| return err; |
| } |
| |
| EXPORT_SYMBOL(ec_write); |
| |
| extern int ec_transaction(u8 command, |
| const u8 *wdata, unsigned wdata_len, |
| u8 *rdata, unsigned rdata_len) |
| { |
| struct acpi_ec *ec; |
| |
| if (!first_ec) |
| return -ENODEV; |
| |
| ec = acpi_driver_data(first_ec); |
| |
| return acpi_ec_transaction(ec, command, wdata, |
| wdata_len, rdata, rdata_len); |
| } |
| |
| EXPORT_SYMBOL(ec_transaction); |
| |
| static int acpi_ec_query(struct acpi_ec *ec, u8 *data) |
| { |
| int result; |
| u8 d; |
| |
| if (!ec || !data) |
| return -EINVAL; |
| |
| /* |
| * Query the EC to find out which _Qxx method we need to evaluate. |
| * Note that successful completion of the query causes the ACPI_EC_SCI |
| * bit to be cleared (and thus clearing the interrupt source). |
| */ |
| |
| result = acpi_ec_transaction(ec, ACPI_EC_COMMAND_QUERY, NULL, 0, &d, 1); |
| if (result) |
| return result; |
| |
| if (!d) |
| return -ENODATA; |
| |
| *data = d; |
| return 0; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Event Management |
| -------------------------------------------------------------------------- */ |
| |
| static void acpi_ec_gpe_query(void *ec_cxt) |
| { |
| struct acpi_ec *ec = (struct acpi_ec *)ec_cxt; |
| u8 value = 0; |
| char object_name[8]; |
| |
| if (!ec || acpi_ec_query(ec, &value)) |
| return; |
| |
| snprintf(object_name, 8, "_Q%2.2X", value); |
| |
| printk(KERN_INFO PREFIX "evaluating %s\n", object_name); |
| |
| acpi_evaluate_object(ec->handle, object_name, NULL, NULL); |
| } |
| |
| static u32 acpi_ec_gpe_handler(void *data) |
| { |
| acpi_status status = AE_OK; |
| u8 value; |
| struct acpi_ec *ec = (struct acpi_ec *)data; |
| |
| |
| if (acpi_ec_mode == EC_INTR) { |
| wake_up(&ec->wait); |
| } |
| |
| value = acpi_ec_read_status(ec); |
| if ((value & ACPI_EC_FLAG_SCI) && !atomic_read(&ec->query_pending)) { |
| atomic_set(&ec->query_pending, 1); |
| status = acpi_os_execute(OSL_EC_BURST_HANDLER, acpi_ec_gpe_query, ec); |
| } |
| |
| return status == AE_OK ? |
| ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Address Space Management |
| -------------------------------------------------------------------------- */ |
| |
| static acpi_status |
| acpi_ec_space_setup(acpi_handle region_handle, |
| u32 function, void *handler_context, void **return_context) |
| { |
| /* |
| * The EC object is in the handler context and is needed |
| * when calling the acpi_ec_space_handler. |
| */ |
| *return_context = (function != ACPI_REGION_DEACTIVATE) ? |
| handler_context : NULL; |
| |
| return AE_OK; |
| } |
| |
| static acpi_status |
| acpi_ec_space_handler(u32 function, |
| acpi_physical_address address, |
| u32 bit_width, |
| acpi_integer * value, |
| void *handler_context, void *region_context) |
| { |
| int result = 0; |
| struct acpi_ec *ec = NULL; |
| u64 temp = *value; |
| acpi_integer f_v = 0; |
| int i = 0; |
| |
| |
| if ((address > 0xFF) || !value || !handler_context) |
| return AE_BAD_PARAMETER; |
| |
| if (bit_width != 8 && acpi_strict) { |
| return AE_BAD_PARAMETER; |
| } |
| |
| ec = (struct acpi_ec *)handler_context; |
| |
| next_byte: |
| switch (function) { |
| case ACPI_READ: |
| temp = 0; |
| result = acpi_ec_read(ec, (u8) address, (u8 *) &temp); |
| break; |
| case ACPI_WRITE: |
| result = acpi_ec_write(ec, (u8) address, (u8) temp); |
| break; |
| default: |
| result = -EINVAL; |
| goto out; |
| break; |
| } |
| |
| bit_width -= 8; |
| if (bit_width) { |
| if (function == ACPI_READ) |
| f_v |= temp << 8 * i; |
| if (function == ACPI_WRITE) |
| temp >>= 8; |
| i++; |
| address++; |
| goto next_byte; |
| } |
| |
| if (function == ACPI_READ) { |
| f_v |= temp << 8 * i; |
| *value = f_v; |
| } |
| |
| out: |
| switch (result) { |
| case -EINVAL: |
| return AE_BAD_PARAMETER; |
| break; |
| case -ENODEV: |
| return AE_NOT_FOUND; |
| break; |
| case -ETIME: |
| return AE_TIME; |
| break; |
| default: |
| return AE_OK; |
| } |
| } |
| |
| /* -------------------------------------------------------------------------- |
| FS Interface (/proc) |
| -------------------------------------------------------------------------- */ |
| |
| static struct proc_dir_entry *acpi_ec_dir; |
| |
| static int acpi_ec_read_info(struct seq_file *seq, void *offset) |
| { |
| struct acpi_ec *ec = (struct acpi_ec *)seq->private; |
| |
| |
| if (!ec) |
| goto end; |
| |
| seq_printf(seq, "gpe bit: 0x%02x\n", |
| (u32) ec->gpe_bit); |
| seq_printf(seq, "ports: 0x%02x, 0x%02x\n", |
| (u32) ec->command_addr, |
| (u32) ec->data_addr); |
| seq_printf(seq, "use global lock: %s\n", |
| ec->global_lock ? "yes" : "no"); |
| acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR); |
| |
| end: |
| return 0; |
| } |
| |
| static int acpi_ec_info_open_fs(struct inode *inode, struct file *file) |
| { |
| return single_open(file, acpi_ec_read_info, PDE(inode)->data); |
| } |
| |
| static struct file_operations acpi_ec_info_ops = { |
| .open = acpi_ec_info_open_fs, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int acpi_ec_add_fs(struct acpi_device *device) |
| { |
| struct proc_dir_entry *entry = NULL; |
| |
| |
| if (!acpi_device_dir(device)) { |
| acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), |
| acpi_ec_dir); |
| if (!acpi_device_dir(device)) |
| return -ENODEV; |
| } |
| |
| entry = create_proc_entry(ACPI_EC_FILE_INFO, S_IRUGO, |
| acpi_device_dir(device)); |
| if (!entry) |
| return -ENODEV; |
| else { |
| entry->proc_fops = &acpi_ec_info_ops; |
| entry->data = acpi_driver_data(device); |
| entry->owner = THIS_MODULE; |
| } |
| |
| return 0; |
| } |
| |
| static int acpi_ec_remove_fs(struct acpi_device *device) |
| { |
| |
| if (acpi_device_dir(device)) { |
| remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device)); |
| remove_proc_entry(acpi_device_bid(device), acpi_ec_dir); |
| acpi_device_dir(device) = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /* -------------------------------------------------------------------------- |
| Driver Interface |
| -------------------------------------------------------------------------- */ |
| |
| static int acpi_ec_add(struct acpi_device *device) |
| { |
| int result = 0; |
| acpi_status status = AE_OK; |
| struct acpi_ec *ec = NULL; |
| |
| |
| if (!device) |
| return -EINVAL; |
| |
| ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); |
| if (!ec) |
| return -ENOMEM; |
| memset(ec, 0, sizeof(struct acpi_ec)); |
| |
| ec->handle = device->handle; |
| ec->uid = -1; |
| mutex_init(&ec->lock); |
| atomic_set(&ec->query_pending, 0); |
| if (acpi_ec_mode == EC_INTR) { |
| atomic_set(&ec->leaving_burst, 1); |
| init_waitqueue_head(&ec->wait); |
| } |
| strcpy(acpi_device_name(device), ACPI_EC_DEVICE_NAME); |
| strcpy(acpi_device_class(device), ACPI_EC_CLASS); |
| acpi_driver_data(device) = ec; |
| |
| /* Use the global lock for all EC transactions? */ |
| acpi_evaluate_integer(ec->handle, "_GLK", NULL, |
| &ec->global_lock); |
| |
| /* XXX we don't test uids, because on some boxes ecdt uid = 0, see: |
| http://bugzilla.kernel.org/show_bug.cgi?id=6111 */ |
| if (ec_ecdt) { |
| acpi_remove_address_space_handler(ACPI_ROOT_OBJECT, |
| ACPI_ADR_SPACE_EC, |
| &acpi_ec_space_handler); |
| |
| acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit, |
| &acpi_ec_gpe_handler); |
| |
| kfree(ec_ecdt); |
| } |
| |
| /* Get GPE bit assignment (EC events). */ |
| /* TODO: Add support for _GPE returning a package */ |
| status = |
| acpi_evaluate_integer(ec->handle, "_GPE", NULL, |
| &ec->gpe_bit); |
| if (ACPI_FAILURE(status)) { |
| ACPI_EXCEPTION((AE_INFO, status, "Obtaining GPE bit assignment")); |
| result = -ENODEV; |
| goto end; |
| } |
| |
| result = acpi_ec_add_fs(device); |
| if (result) |
| goto end; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s [%s] (gpe %d) interrupt mode.", |
| acpi_device_name(device), acpi_device_bid(device), |
| (u32) ec->gpe_bit)); |
| |
| if (!first_ec) |
| first_ec = device; |
| |
| end: |
| if (result) |
| kfree(ec); |
| |
| return result; |
| } |
| |
| static int acpi_ec_remove(struct acpi_device *device, int type) |
| { |
| struct acpi_ec *ec = NULL; |
| |
| |
| if (!device) |
| return -EINVAL; |
| |
| ec = acpi_driver_data(device); |
| |
| acpi_ec_remove_fs(device); |
| |
| kfree(ec); |
| |
| return 0; |
| } |
| |
| static acpi_status |
| acpi_ec_io_ports(struct acpi_resource *resource, void *context) |
| { |
| struct acpi_ec *ec = (struct acpi_ec *)context; |
| |
| if (resource->type != ACPI_RESOURCE_TYPE_IO) { |
| return AE_OK; |
| } |
| |
| /* |
| * The first address region returned is the data port, and |
| * the second address region returned is the status/command |
| * port. |
| */ |
| if (ec->data_addr == 0) { |
| ec->data_addr = resource->data.io.minimum; |
| } else if (ec->command_addr == 0) { |
| ec->command_addr = resource->data.io.minimum; |
| } else { |
| return AE_CTRL_TERMINATE; |
| } |
| |
| return AE_OK; |
| } |
| |
| static int acpi_ec_start(struct acpi_device *device) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_ec *ec = NULL; |
| |
| |
| if (!device) |
| return -EINVAL; |
| |
| ec = acpi_driver_data(device); |
| |
| if (!ec) |
| return -EINVAL; |
| |
| /* |
| * Get I/O port addresses. Convert to GAS format. |
| */ |
| status = acpi_walk_resources(ec->handle, METHOD_NAME__CRS, |
| acpi_ec_io_ports, ec); |
| if (ACPI_FAILURE(status) || ec->command_addr == 0) { |
| ACPI_EXCEPTION((AE_INFO, status, |
| "Error getting I/O port addresses")); |
| return -ENODEV; |
| } |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "gpe=0x%02lx, ports=0x%2lx,0x%2lx", |
| ec->gpe_bit, ec->command_addr, ec->data_addr)); |
| |
| /* |
| * Install GPE handler |
| */ |
| status = acpi_install_gpe_handler(NULL, ec->gpe_bit, |
| ACPI_GPE_EDGE_TRIGGERED, |
| &acpi_ec_gpe_handler, ec); |
| if (ACPI_FAILURE(status)) { |
| return -ENODEV; |
| } |
| acpi_set_gpe_type(NULL, ec->gpe_bit, ACPI_GPE_TYPE_RUNTIME); |
| acpi_enable_gpe(NULL, ec->gpe_bit, ACPI_NOT_ISR); |
| |
| status = acpi_install_address_space_handler(ec->handle, |
| ACPI_ADR_SPACE_EC, |
| &acpi_ec_space_handler, |
| &acpi_ec_space_setup, ec); |
| if (ACPI_FAILURE(status)) { |
| acpi_remove_gpe_handler(NULL, ec->gpe_bit, |
| &acpi_ec_gpe_handler); |
| return -ENODEV; |
| } |
| |
| return AE_OK; |
| } |
| |
| static int acpi_ec_stop(struct acpi_device *device, int type) |
| { |
| acpi_status status = AE_OK; |
| struct acpi_ec *ec = NULL; |
| |
| |
| if (!device) |
| return -EINVAL; |
| |
| ec = acpi_driver_data(device); |
| |
| status = acpi_remove_address_space_handler(ec->handle, |
| ACPI_ADR_SPACE_EC, |
| &acpi_ec_space_handler); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| status = |
| acpi_remove_gpe_handler(NULL, ec->gpe_bit, |
| &acpi_ec_gpe_handler); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static acpi_status __init |
| acpi_fake_ecdt_callback(acpi_handle handle, |
| u32 Level, void *context, void **retval) |
| { |
| acpi_status status; |
| |
| mutex_init(&ec_ecdt->lock); |
| if (acpi_ec_mode == EC_INTR) { |
| init_waitqueue_head(&ec_ecdt->wait); |
| } |
| status = acpi_walk_resources(handle, METHOD_NAME__CRS, |
| acpi_ec_io_ports, ec_ecdt); |
| if (ACPI_FAILURE(status)) |
| return status; |
| |
| ec_ecdt->uid = -1; |
| acpi_evaluate_integer(handle, "_UID", NULL, &ec_ecdt->uid); |
| |
| status = |
| acpi_evaluate_integer(handle, "_GPE", NULL, |
| &ec_ecdt->gpe_bit); |
| if (ACPI_FAILURE(status)) |
| return status; |
| ec_ecdt->global_lock = TRUE; |
| ec_ecdt->handle = handle; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "GPE=0x%02lx, ports=0x%2lx, 0x%2lx", |
| ec_ecdt->gpe_bit, ec_ecdt->command_addr, ec_ecdt->data_addr)); |
| |
| return AE_CTRL_TERMINATE; |
| } |
| |
| /* |
| * Some BIOS (such as some from Gateway laptops) access EC region very early |
| * such as in BAT0._INI or EC._INI before an EC device is found and |
| * do not provide an ECDT. According to ACPI spec, ECDT isn't mandatorily |
| * required, but if EC regison is accessed early, it is required. |
| * The routine tries to workaround the BIOS bug by pre-scan EC device |
| * It assumes that _CRS, _HID, _GPE, _UID methods of EC don't touch any |
| * op region (since _REG isn't invoked yet). The assumption is true for |
| * all systems found. |
| */ |
| static int __init acpi_ec_fake_ecdt(void) |
| { |
| acpi_status status; |
| int ret = 0; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Try to make an fake ECDT")); |
| |
| ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); |
| if (!ec_ecdt) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| memset(ec_ecdt, 0, sizeof(struct acpi_ec)); |
| |
| status = acpi_get_devices(ACPI_EC_HID, |
| acpi_fake_ecdt_callback, NULL, NULL); |
| if (ACPI_FAILURE(status)) { |
| kfree(ec_ecdt); |
| ec_ecdt = NULL; |
| ret = -ENODEV; |
| ACPI_EXCEPTION((AE_INFO, status, "Can't make an fake ECDT")); |
| goto error; |
| } |
| return 0; |
| error: |
| return ret; |
| } |
| |
| static int __init acpi_ec_get_real_ecdt(void) |
| { |
| acpi_status status; |
| struct acpi_table_ecdt *ecdt_ptr; |
| |
| status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING, |
| (struct acpi_table_header **) |
| &ecdt_ptr); |
| if (ACPI_FAILURE(status)) |
| return -ENODEV; |
| |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found ECDT")); |
| |
| /* |
| * Generate a temporary ec context to use until the namespace is scanned |
| */ |
| ec_ecdt = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL); |
| if (!ec_ecdt) |
| return -ENOMEM; |
| memset(ec_ecdt, 0, sizeof(struct acpi_ec)); |
| |
| mutex_init(&ec_ecdt->lock); |
| if (acpi_ec_mode == EC_INTR) { |
| init_waitqueue_head(&ec_ecdt->wait); |
| } |
| ec_ecdt->command_addr = ecdt_ptr->ec_control.address; |
| ec_ecdt->data_addr = ecdt_ptr->ec_data.address; |
| ec_ecdt->gpe_bit = ecdt_ptr->gpe_bit; |
| /* use the GL just to be safe */ |
| ec_ecdt->global_lock = TRUE; |
| ec_ecdt->uid = ecdt_ptr->uid; |
| |
| status = |
| acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle); |
| if (ACPI_FAILURE(status)) { |
| goto error; |
| } |
| |
| return 0; |
| error: |
| ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT")); |
| kfree(ec_ecdt); |
| ec_ecdt = NULL; |
| |
| return -ENODEV; |
| } |
| |
| static int __initdata acpi_fake_ecdt_enabled; |
| int __init acpi_ec_ecdt_probe(void) |
| { |
| acpi_status status; |
| int ret; |
| |
| ret = acpi_ec_get_real_ecdt(); |
| /* Try to make a fake ECDT */ |
| if (ret && acpi_fake_ecdt_enabled) { |
| ret = acpi_ec_fake_ecdt(); |
| } |
| |
| if (ret) |
| return 0; |
| |
| /* |
| * Install GPE handler |
| */ |
| status = acpi_install_gpe_handler(NULL, ec_ecdt->gpe_bit, |
| ACPI_GPE_EDGE_TRIGGERED, |
| &acpi_ec_gpe_handler, ec_ecdt); |
| if (ACPI_FAILURE(status)) { |
| goto error; |
| } |
| acpi_set_gpe_type(NULL, ec_ecdt->gpe_bit, ACPI_GPE_TYPE_RUNTIME); |
| acpi_enable_gpe(NULL, ec_ecdt->gpe_bit, ACPI_NOT_ISR); |
| |
| status = acpi_install_address_space_handler(ACPI_ROOT_OBJECT, |
| ACPI_ADR_SPACE_EC, |
| &acpi_ec_space_handler, |
| &acpi_ec_space_setup, |
| ec_ecdt); |
| if (ACPI_FAILURE(status)) { |
| acpi_remove_gpe_handler(NULL, ec_ecdt->gpe_bit, |
| &acpi_ec_gpe_handler); |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| ACPI_EXCEPTION((AE_INFO, status, "Could not use ECDT")); |
| kfree(ec_ecdt); |
| ec_ecdt = NULL; |
| |
| return -ENODEV; |
| } |
| |
| static int __init acpi_ec_init(void) |
| { |
| int result = 0; |
| |
| |
| if (acpi_disabled) |
| return 0; |
| |
| acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir); |
| if (!acpi_ec_dir) |
| return -ENODEV; |
| |
| /* Now register the driver for the EC */ |
| result = acpi_bus_register_driver(&acpi_ec_driver); |
| if (result < 0) { |
| remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); |
| return -ENODEV; |
| } |
| |
| return result; |
| } |
| |
| subsys_initcall(acpi_ec_init); |
| |
| /* EC driver currently not unloadable */ |
| #if 0 |
| static void __exit acpi_ec_exit(void) |
| { |
| |
| acpi_bus_unregister_driver(&acpi_ec_driver); |
| |
| remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); |
| |
| return; |
| } |
| #endif /* 0 */ |
| |
| static int __init acpi_fake_ecdt_setup(char *str) |
| { |
| acpi_fake_ecdt_enabled = 1; |
| return 1; |
| } |
| |
| __setup("acpi_fake_ecdt", acpi_fake_ecdt_setup); |
| static int __init acpi_ec_set_intr_mode(char *str) |
| { |
| int intr; |
| |
| if (!get_option(&str, &intr)) |
| return 0; |
| |
| if (intr) { |
| acpi_ec_mode = EC_INTR; |
| } else { |
| acpi_ec_mode = EC_POLL; |
| } |
| acpi_ec_driver.ops.add = acpi_ec_add; |
| ACPI_DEBUG_PRINT((ACPI_DB_INFO, "EC %s mode.\n", intr ? "interrupt" : "polling")); |
| |
| return 1; |
| } |
| |
| __setup("ec_intr=", acpi_ec_set_intr_mode); |