| /* |
| * ALSA SoC TLV320AIC3X codec driver |
| * |
| * Author: Vladimir Barinov, <vbarinov@embeddedalley.com> |
| * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com> |
| * |
| * Based on sound/soc/codecs/wm8753.c by Liam Girdwood |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Notes: |
| * The AIC3X is a driver for a low power stereo audio |
| * codecs aic31, aic32, aic33, aic3007. |
| * |
| * It supports full aic33 codec functionality. |
| * The compatibility with aic32, aic31 and aic3007 is as follows: |
| * aic32/aic3007 | aic31 |
| * --------------------------------------- |
| * MONO_LOUT -> N/A | MONO_LOUT -> N/A |
| * | IN1L -> LINE1L |
| * | IN1R -> LINE1R |
| * | IN2L -> LINE2L |
| * | IN2R -> LINE2R |
| * | MIC3L/R -> N/A |
| * truncated internal functionality in |
| * accordance with documentation |
| * --------------------------------------- |
| * |
| * Hence the machine layer should disable unsupported inputs/outputs by |
| * snd_soc_dapm_disable_pin(codec, "MONO_LOUT"), etc. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/i2c.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| #include <sound/tlv.h> |
| #include <sound/tlv320aic3x.h> |
| |
| #include "tlv320aic3x.h" |
| |
| #define AIC3X_NUM_SUPPLIES 4 |
| static const char *aic3x_supply_names[AIC3X_NUM_SUPPLIES] = { |
| "IOVDD", /* I/O Voltage */ |
| "DVDD", /* Digital Core Voltage */ |
| "AVDD", /* Analog DAC Voltage */ |
| "DRVDD", /* ADC Analog and Output Driver Voltage */ |
| }; |
| |
| /* codec private data */ |
| struct aic3x_priv { |
| struct regulator_bulk_data supplies[AIC3X_NUM_SUPPLIES]; |
| enum snd_soc_control_type control_type; |
| struct aic3x_setup_data *setup; |
| void *control_data; |
| unsigned int sysclk; |
| int master; |
| int gpio_reset; |
| #define AIC3X_MODEL_3X 0 |
| #define AIC3X_MODEL_33 1 |
| #define AIC3X_MODEL_3007 2 |
| u16 model; |
| }; |
| |
| /* |
| * AIC3X register cache |
| * We can't read the AIC3X register space when we are |
| * using 2 wire for device control, so we cache them instead. |
| * There is no point in caching the reset register |
| */ |
| static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = { |
| 0x00, 0x00, 0x00, 0x10, /* 0 */ |
| 0x04, 0x00, 0x00, 0x00, /* 4 */ |
| 0x00, 0x00, 0x00, 0x01, /* 8 */ |
| 0x00, 0x00, 0x00, 0x80, /* 12 */ |
| 0x80, 0xff, 0xff, 0x78, /* 16 */ |
| 0x78, 0x78, 0x78, 0x78, /* 20 */ |
| 0x78, 0x00, 0x00, 0xfe, /* 24 */ |
| 0x00, 0x00, 0xfe, 0x00, /* 28 */ |
| 0x18, 0x18, 0x00, 0x00, /* 32 */ |
| 0x00, 0x00, 0x00, 0x00, /* 36 */ |
| 0x00, 0x00, 0x00, 0x80, /* 40 */ |
| 0x80, 0x00, 0x00, 0x00, /* 44 */ |
| 0x00, 0x00, 0x00, 0x04, /* 48 */ |
| 0x00, 0x00, 0x00, 0x00, /* 52 */ |
| 0x00, 0x00, 0x04, 0x00, /* 56 */ |
| 0x00, 0x00, 0x00, 0x00, /* 60 */ |
| 0x00, 0x04, 0x00, 0x00, /* 64 */ |
| 0x00, 0x00, 0x00, 0x00, /* 68 */ |
| 0x04, 0x00, 0x00, 0x00, /* 72 */ |
| 0x00, 0x00, 0x00, 0x00, /* 76 */ |
| 0x00, 0x00, 0x00, 0x00, /* 80 */ |
| 0x00, 0x00, 0x00, 0x00, /* 84 */ |
| 0x00, 0x00, 0x00, 0x00, /* 88 */ |
| 0x00, 0x00, 0x00, 0x00, /* 92 */ |
| 0x00, 0x00, 0x00, 0x00, /* 96 */ |
| 0x00, 0x00, 0x02, /* 100 */ |
| }; |
| |
| /* |
| * read aic3x register cache |
| */ |
| static inline unsigned int aic3x_read_reg_cache(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| u8 *cache = codec->reg_cache; |
| if (reg >= AIC3X_CACHEREGNUM) |
| return -1; |
| return cache[reg]; |
| } |
| |
| /* |
| * write aic3x register cache |
| */ |
| static inline void aic3x_write_reg_cache(struct snd_soc_codec *codec, |
| u8 reg, u8 value) |
| { |
| u8 *cache = codec->reg_cache; |
| if (reg >= AIC3X_CACHEREGNUM) |
| return; |
| cache[reg] = value; |
| } |
| |
| /* |
| * write to the aic3x register space |
| */ |
| static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg, |
| unsigned int value) |
| { |
| u8 data[2]; |
| |
| /* data is |
| * D15..D8 aic3x register offset |
| * D7...D0 register data |
| */ |
| data[0] = reg & 0xff; |
| data[1] = value & 0xff; |
| |
| aic3x_write_reg_cache(codec, data[0], data[1]); |
| if (codec->hw_write(codec->control_data, data, 2) == 2) |
| return 0; |
| else |
| return -EIO; |
| } |
| |
| /* |
| * read from the aic3x register space |
| */ |
| static int aic3x_read(struct snd_soc_codec *codec, unsigned int reg, |
| u8 *value) |
| { |
| *value = reg & 0xff; |
| |
| value[0] = i2c_smbus_read_byte_data(codec->control_data, value[0]); |
| |
| aic3x_write_reg_cache(codec, reg, *value); |
| return 0; |
| } |
| |
| #define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \ |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ |
| .info = snd_soc_info_volsw, \ |
| .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw_aic3x, \ |
| .private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) } |
| |
| /* |
| * All input lines are connected when !0xf and disconnected with 0xf bit field, |
| * so we have to use specific dapm_put call for input mixer |
| */ |
| static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol); |
| struct soc_mixer_control *mc = |
| (struct soc_mixer_control *)kcontrol->private_value; |
| unsigned int reg = mc->reg; |
| unsigned int shift = mc->shift; |
| int max = mc->max; |
| unsigned int mask = (1 << fls(max)) - 1; |
| unsigned int invert = mc->invert; |
| unsigned short val, val_mask; |
| int ret; |
| struct snd_soc_dapm_path *path; |
| int found = 0; |
| |
| val = (ucontrol->value.integer.value[0] & mask); |
| |
| mask = 0xf; |
| if (val) |
| val = mask; |
| |
| if (invert) |
| val = mask - val; |
| val_mask = mask << shift; |
| val = val << shift; |
| |
| mutex_lock(&widget->codec->mutex); |
| |
| if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) { |
| /* find dapm widget path assoc with kcontrol */ |
| list_for_each_entry(path, &widget->codec->dapm_paths, list) { |
| if (path->kcontrol != kcontrol) |
| continue; |
| |
| /* found, now check type */ |
| found = 1; |
| if (val) |
| /* new connection */ |
| path->connect = invert ? 0 : 1; |
| else |
| /* old connection must be powered down */ |
| path->connect = invert ? 1 : 0; |
| break; |
| } |
| |
| if (found) |
| snd_soc_dapm_sync(widget->codec); |
| } |
| |
| ret = snd_soc_update_bits(widget->codec, reg, val_mask, val); |
| |
| mutex_unlock(&widget->codec->mutex); |
| return ret; |
| } |
| |
| static const char *aic3x_left_dac_mux[] = { "DAC_L1", "DAC_L3", "DAC_L2" }; |
| static const char *aic3x_right_dac_mux[] = { "DAC_R1", "DAC_R3", "DAC_R2" }; |
| static const char *aic3x_left_hpcom_mux[] = |
| { "differential of HPLOUT", "constant VCM", "single-ended" }; |
| static const char *aic3x_right_hpcom_mux[] = |
| { "differential of HPROUT", "constant VCM", "single-ended", |
| "differential of HPLCOM", "external feedback" }; |
| static const char *aic3x_linein_mode_mux[] = { "single-ended", "differential" }; |
| static const char *aic3x_adc_hpf[] = |
| { "Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" }; |
| |
| #define LDAC_ENUM 0 |
| #define RDAC_ENUM 1 |
| #define LHPCOM_ENUM 2 |
| #define RHPCOM_ENUM 3 |
| #define LINE1L_ENUM 4 |
| #define LINE1R_ENUM 5 |
| #define LINE2L_ENUM 6 |
| #define LINE2R_ENUM 7 |
| #define ADC_HPF_ENUM 8 |
| |
| static const struct soc_enum aic3x_enum[] = { |
| SOC_ENUM_SINGLE(DAC_LINE_MUX, 6, 3, aic3x_left_dac_mux), |
| SOC_ENUM_SINGLE(DAC_LINE_MUX, 4, 3, aic3x_right_dac_mux), |
| SOC_ENUM_SINGLE(HPLCOM_CFG, 4, 3, aic3x_left_hpcom_mux), |
| SOC_ENUM_SINGLE(HPRCOM_CFG, 3, 5, aic3x_right_hpcom_mux), |
| SOC_ENUM_SINGLE(LINE1L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux), |
| SOC_ENUM_SINGLE(LINE1R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux), |
| SOC_ENUM_SINGLE(LINE2L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux), |
| SOC_ENUM_SINGLE(LINE2R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux), |
| SOC_ENUM_DOUBLE(AIC3X_CODEC_DFILT_CTRL, 6, 4, 4, aic3x_adc_hpf), |
| }; |
| |
| /* |
| * DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps |
| */ |
| static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0); |
| /* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */ |
| static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0); |
| /* |
| * Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB. |
| * Step size is approximately 0.5 dB over most of the scale but increasing |
| * near the very low levels. |
| * Define dB scale so that it is mostly correct for range about -55 to 0 dB |
| * but having increasing dB difference below that (and where it doesn't count |
| * so much). This setting shows -50 dB (actual is -50.3 dB) for register |
| * value 100 and -58.5 dB (actual is -78.3 dB) for register value 117. |
| */ |
| static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1); |
| |
| static const struct snd_kcontrol_new aic3x_snd_controls[] = { |
| /* Output */ |
| SOC_DOUBLE_R_TLV("PCM Playback Volume", |
| LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv), |
| |
| /* |
| * Output controls that map to output mixer switches. Note these are |
| * only for swapped L-to-R and R-to-L routes. See below stereo controls |
| * for direct L-to-L and R-to-R routes. |
| */ |
| SOC_SINGLE_TLV("Left Line Mixer Line2R Bypass Volume", |
| LINE2R_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left Line Mixer PGAR Bypass Volume", |
| PGAR_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left Line Mixer DACR1 Playback Volume", |
| DACR1_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| |
| SOC_SINGLE_TLV("Right Line Mixer Line2L Bypass Volume", |
| LINE2L_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right Line Mixer PGAL Bypass Volume", |
| PGAL_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right Line Mixer DACL1 Playback Volume", |
| DACL1_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv), |
| |
| SOC_SINGLE_TLV("Left HP Mixer Line2R Bypass Volume", |
| LINE2R_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left HP Mixer PGAR Bypass Volume", |
| PGAR_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left HP Mixer DACR1 Playback Volume", |
| DACR1_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv), |
| |
| SOC_SINGLE_TLV("Right HP Mixer Line2L Bypass Volume", |
| LINE2L_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right HP Mixer PGAL Bypass Volume", |
| PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right HP Mixer DACL1 Playback Volume", |
| DACL1_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv), |
| |
| SOC_SINGLE_TLV("Left HPCOM Mixer Line2R Bypass Volume", |
| LINE2R_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left HPCOM Mixer PGAR Bypass Volume", |
| PGAR_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Left HPCOM Mixer DACR1 Playback Volume", |
| DACR1_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv), |
| |
| SOC_SINGLE_TLV("Right HPCOM Mixer Line2L Bypass Volume", |
| LINE2L_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right HPCOM Mixer PGAL Bypass Volume", |
| PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), |
| SOC_SINGLE_TLV("Right HPCOM Mixer DACL1 Playback Volume", |
| DACL1_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv), |
| |
| /* Stereo output controls for direct L-to-L and R-to-R routes */ |
| SOC_DOUBLE_R_TLV("Line Line2 Bypass Volume", |
| LINE2L_2_LLOPM_VOL, LINE2R_2_RLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("Line PGA Bypass Volume", |
| PGAL_2_LLOPM_VOL, PGAR_2_RLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("Line DAC Playback Volume", |
| DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| |
| SOC_DOUBLE_R_TLV("Mono Line2 Bypass Volume", |
| LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("Mono PGA Bypass Volume", |
| PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("Mono DAC Playback Volume", |
| DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| |
| SOC_DOUBLE_R_TLV("HP Line2 Bypass Volume", |
| LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("HP PGA Bypass Volume", |
| PGAL_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("HP DAC Playback Volume", |
| DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL, |
| 0, 118, 1, output_stage_tlv), |
| |
| SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Volume", |
| LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("HPCOM PGA Bypass Volume", |
| PGAL_2_HPLCOM_VOL, PGAR_2_HPRCOM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume", |
| DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL, |
| 0, 118, 1, output_stage_tlv), |
| |
| /* Output pin mute controls */ |
| SOC_DOUBLE_R("Line Playback Switch", LLOPM_CTRL, RLOPM_CTRL, 3, |
| 0x01, 0), |
| SOC_SINGLE("Mono Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0), |
| SOC_DOUBLE_R("HP Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3, |
| 0x01, 0), |
| SOC_DOUBLE_R("HPCOM Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3, |
| 0x01, 0), |
| |
| /* |
| * Note: enable Automatic input Gain Controller with care. It can |
| * adjust PGA to max value when ADC is on and will never go back. |
| */ |
| SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0), |
| |
| /* Input */ |
| SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL, |
| 0, 119, 0, adc_tlv), |
| SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1), |
| |
| SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]), |
| }; |
| |
| /* |
| * Class-D amplifier gain. From 0 to 18 dB in 6 dB steps |
| */ |
| static DECLARE_TLV_DB_SCALE(classd_amp_tlv, 0, 600, 0); |
| |
| static const struct snd_kcontrol_new aic3x_classd_amp_gain_ctrl = |
| SOC_DOUBLE_TLV("Class-D Amplifier Gain", CLASSD_CTRL, 6, 4, 3, 0, classd_amp_tlv); |
| |
| /* Left DAC Mux */ |
| static const struct snd_kcontrol_new aic3x_left_dac_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]); |
| |
| /* Right DAC Mux */ |
| static const struct snd_kcontrol_new aic3x_right_dac_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[RDAC_ENUM]); |
| |
| /* Left HPCOM Mux */ |
| static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LHPCOM_ENUM]); |
| |
| /* Right HPCOM Mux */ |
| static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[RHPCOM_ENUM]); |
| |
| /* Left Line Mixer */ |
| static const struct snd_kcontrol_new aic3x_left_line_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_LLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_LLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_LLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_LLOPM_VOL, 7, 1, 0), |
| }; |
| |
| /* Right Line Mixer */ |
| static const struct snd_kcontrol_new aic3x_right_line_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_RLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_RLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_RLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_RLOPM_VOL, 7, 1, 0), |
| }; |
| |
| /* Mono Mixer */ |
| static const struct snd_kcontrol_new aic3x_mono_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0), |
| }; |
| |
| /* Left HP Mixer */ |
| static const struct snd_kcontrol_new aic3x_left_hp_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLOUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLOUT_VOL, 7, 1, 0), |
| }; |
| |
| /* Right HP Mixer */ |
| static const struct snd_kcontrol_new aic3x_right_hp_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPROUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPROUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPROUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPROUT_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPROUT_VOL, 7, 1, 0), |
| }; |
| |
| /* Left HPCOM Mixer */ |
| static const struct snd_kcontrol_new aic3x_left_hpcom_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPLCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPLCOM_VOL, 7, 1, 0), |
| }; |
| |
| /* Right HPCOM Mixer */ |
| static const struct snd_kcontrol_new aic3x_right_hpcom_mixer_controls[] = { |
| SOC_DAPM_SINGLE("Line2L Bypass Switch", LINE2L_2_HPRCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAL Bypass Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACL1 Switch", DACL1_2_HPRCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("Line2R Bypass Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("PGAR Bypass Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0), |
| SOC_DAPM_SINGLE("DACR1 Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0), |
| }; |
| |
| /* Left PGA Mixer */ |
| static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = { |
| SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1), |
| }; |
| |
| /* Right PGA Mixer */ |
| static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = { |
| SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1), |
| SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1), |
| }; |
| |
| /* Left Line1 Mux */ |
| static const struct snd_kcontrol_new aic3x_left_line1_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LINE1L_ENUM]); |
| |
| /* Right Line1 Mux */ |
| static const struct snd_kcontrol_new aic3x_right_line1_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LINE1R_ENUM]); |
| |
| /* Left Line2 Mux */ |
| static const struct snd_kcontrol_new aic3x_left_line2_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LINE2L_ENUM]); |
| |
| /* Right Line2 Mux */ |
| static const struct snd_kcontrol_new aic3x_right_line2_mux_controls = |
| SOC_DAPM_ENUM("Route", aic3x_enum[LINE2R_ENUM]); |
| |
| static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { |
| /* Left DAC to Left Outputs */ |
| SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0), |
| SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_dac_mux_controls), |
| SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_hpcom_mux_controls), |
| SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0), |
| |
| /* Right DAC to Right Outputs */ |
| SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0), |
| SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_dac_mux_controls), |
| SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_hpcom_mux_controls), |
| SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0), |
| |
| /* Mono Output */ |
| SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0), |
| |
| /* Inputs to Left ADC */ |
| SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0), |
| SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_pga_mixer_controls[0], |
| ARRAY_SIZE(aic3x_left_pga_mixer_controls)), |
| SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_line1_mux_controls), |
| SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_line1_mux_controls), |
| SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_line2_mux_controls), |
| |
| /* Inputs to Right ADC */ |
| SND_SOC_DAPM_ADC("Right ADC", "Right Capture", |
| LINE1R_2_RADC_CTRL, 2, 0), |
| SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_pga_mixer_controls[0], |
| ARRAY_SIZE(aic3x_right_pga_mixer_controls)), |
| SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_line1_mux_controls), |
| SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_line1_mux_controls), |
| SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_line2_mux_controls), |
| |
| /* |
| * Not a real mic bias widget but similar function. This is for dynamic |
| * control of GPIO1 digital mic modulator clock output function when |
| * using digital mic. |
| */ |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "GPIO1 dmic modclk", |
| AIC3X_GPIO1_REG, 4, 0xf, |
| AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK, |
| AIC3X_GPIO1_FUNC_DISABLED), |
| |
| /* |
| * Also similar function like mic bias. Selects digital mic with |
| * configurable oversampling rate instead of ADC converter. |
| */ |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 128", |
| AIC3X_ASD_INTF_CTRLA, 0, 3, 1, 0), |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 64", |
| AIC3X_ASD_INTF_CTRLA, 0, 3, 2, 0), |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 32", |
| AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0), |
| |
| /* Mic Bias */ |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2V", |
| MICBIAS_CTRL, 6, 3, 1, 0), |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2.5V", |
| MICBIAS_CTRL, 6, 3, 2, 0), |
| SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias AVDD", |
| MICBIAS_CTRL, 6, 3, 3, 0), |
| |
| /* Output mixers */ |
| SND_SOC_DAPM_MIXER("Left Line Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_line_mixer_controls[0], |
| ARRAY_SIZE(aic3x_left_line_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Right Line Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_line_mixer_controls[0], |
| ARRAY_SIZE(aic3x_right_line_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Mono Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_mono_mixer_controls[0], |
| ARRAY_SIZE(aic3x_mono_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Left HP Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_hp_mixer_controls[0], |
| ARRAY_SIZE(aic3x_left_hp_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Right HP Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_hp_mixer_controls[0], |
| ARRAY_SIZE(aic3x_right_hp_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Left HPCOM Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_left_hpcom_mixer_controls[0], |
| ARRAY_SIZE(aic3x_left_hpcom_mixer_controls)), |
| SND_SOC_DAPM_MIXER("Right HPCOM Mixer", SND_SOC_NOPM, 0, 0, |
| &aic3x_right_hpcom_mixer_controls[0], |
| ARRAY_SIZE(aic3x_right_hpcom_mixer_controls)), |
| |
| SND_SOC_DAPM_OUTPUT("LLOUT"), |
| SND_SOC_DAPM_OUTPUT("RLOUT"), |
| SND_SOC_DAPM_OUTPUT("MONO_LOUT"), |
| SND_SOC_DAPM_OUTPUT("HPLOUT"), |
| SND_SOC_DAPM_OUTPUT("HPROUT"), |
| SND_SOC_DAPM_OUTPUT("HPLCOM"), |
| SND_SOC_DAPM_OUTPUT("HPRCOM"), |
| |
| SND_SOC_DAPM_INPUT("MIC3L"), |
| SND_SOC_DAPM_INPUT("MIC3R"), |
| SND_SOC_DAPM_INPUT("LINE1L"), |
| SND_SOC_DAPM_INPUT("LINE1R"), |
| SND_SOC_DAPM_INPUT("LINE2L"), |
| SND_SOC_DAPM_INPUT("LINE2R"), |
| }; |
| |
| static const struct snd_soc_dapm_widget aic3007_dapm_widgets[] = { |
| /* Class-D outputs */ |
| SND_SOC_DAPM_PGA("Left Class-D Out", CLASSD_CTRL, 3, 0, NULL, 0), |
| SND_SOC_DAPM_PGA("Right Class-D Out", CLASSD_CTRL, 2, 0, NULL, 0), |
| |
| SND_SOC_DAPM_OUTPUT("SPOP"), |
| SND_SOC_DAPM_OUTPUT("SPOM"), |
| }; |
| |
| static const struct snd_soc_dapm_route intercon[] = { |
| /* Left Input */ |
| {"Left Line1L Mux", "single-ended", "LINE1L"}, |
| {"Left Line1L Mux", "differential", "LINE1L"}, |
| |
| {"Left Line2L Mux", "single-ended", "LINE2L"}, |
| {"Left Line2L Mux", "differential", "LINE2L"}, |
| |
| {"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"}, |
| {"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"}, |
| {"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"}, |
| {"Left PGA Mixer", "Mic3L Switch", "MIC3L"}, |
| {"Left PGA Mixer", "Mic3R Switch", "MIC3R"}, |
| |
| {"Left ADC", NULL, "Left PGA Mixer"}, |
| {"Left ADC", NULL, "GPIO1 dmic modclk"}, |
| |
| /* Right Input */ |
| {"Right Line1R Mux", "single-ended", "LINE1R"}, |
| {"Right Line1R Mux", "differential", "LINE1R"}, |
| |
| {"Right Line2R Mux", "single-ended", "LINE2R"}, |
| {"Right Line2R Mux", "differential", "LINE2R"}, |
| |
| {"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"}, |
| {"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"}, |
| {"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"}, |
| {"Right PGA Mixer", "Mic3L Switch", "MIC3L"}, |
| {"Right PGA Mixer", "Mic3R Switch", "MIC3R"}, |
| |
| {"Right ADC", NULL, "Right PGA Mixer"}, |
| {"Right ADC", NULL, "GPIO1 dmic modclk"}, |
| |
| /* |
| * Logical path between digital mic enable and GPIO1 modulator clock |
| * output function |
| */ |
| {"GPIO1 dmic modclk", NULL, "DMic Rate 128"}, |
| {"GPIO1 dmic modclk", NULL, "DMic Rate 64"}, |
| {"GPIO1 dmic modclk", NULL, "DMic Rate 32"}, |
| |
| /* Left DAC Output */ |
| {"Left DAC Mux", "DAC_L1", "Left DAC"}, |
| {"Left DAC Mux", "DAC_L2", "Left DAC"}, |
| {"Left DAC Mux", "DAC_L3", "Left DAC"}, |
| |
| /* Right DAC Output */ |
| {"Right DAC Mux", "DAC_R1", "Right DAC"}, |
| {"Right DAC Mux", "DAC_R2", "Right DAC"}, |
| {"Right DAC Mux", "DAC_R3", "Right DAC"}, |
| |
| /* Left Line Output */ |
| {"Left Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Left Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Left Line Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Left Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Left Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Left Line Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Left Line Out", NULL, "Left Line Mixer"}, |
| {"Left Line Out", NULL, "Left DAC Mux"}, |
| {"LLOUT", NULL, "Left Line Out"}, |
| |
| /* Right Line Output */ |
| {"Right Line Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Right Line Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Right Line Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Right Line Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Right Line Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Right Line Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Right Line Out", NULL, "Right Line Mixer"}, |
| {"Right Line Out", NULL, "Right DAC Mux"}, |
| {"RLOUT", NULL, "Right Line Out"}, |
| |
| /* Mono Output */ |
| {"Mono Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Mono Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Mono Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Mono Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Mono Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Mono Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Mono Out", NULL, "Mono Mixer"}, |
| {"MONO_LOUT", NULL, "Mono Out"}, |
| |
| /* Left HP Output */ |
| {"Left HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Left HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Left HP Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Left HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Left HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Left HP Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Left HP Out", NULL, "Left HP Mixer"}, |
| {"Left HP Out", NULL, "Left DAC Mux"}, |
| {"HPLOUT", NULL, "Left HP Out"}, |
| |
| /* Right HP Output */ |
| {"Right HP Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Right HP Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Right HP Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Right HP Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Right HP Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Right HP Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Right HP Out", NULL, "Right HP Mixer"}, |
| {"Right HP Out", NULL, "Right DAC Mux"}, |
| {"HPROUT", NULL, "Right HP Out"}, |
| |
| /* Left HPCOM Output */ |
| {"Left HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Left HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Left HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Left HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Left HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Left HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Left HPCOM Mux", "differential of HPLOUT", "Left HP Mixer"}, |
| {"Left HPCOM Mux", "constant VCM", "Left HPCOM Mixer"}, |
| {"Left HPCOM Mux", "single-ended", "Left HPCOM Mixer"}, |
| {"Left HP Com", NULL, "Left HPCOM Mux"}, |
| {"HPLCOM", NULL, "Left HP Com"}, |
| |
| /* Right HPCOM Output */ |
| {"Right HPCOM Mixer", "Line2L Bypass Switch", "Left Line2L Mux"}, |
| {"Right HPCOM Mixer", "PGAL Bypass Switch", "Left PGA Mixer"}, |
| {"Right HPCOM Mixer", "DACL1 Switch", "Left DAC Mux"}, |
| {"Right HPCOM Mixer", "Line2R Bypass Switch", "Right Line2R Mux"}, |
| {"Right HPCOM Mixer", "PGAR Bypass Switch", "Right PGA Mixer"}, |
| {"Right HPCOM Mixer", "DACR1 Switch", "Right DAC Mux"}, |
| |
| {"Right HPCOM Mux", "differential of HPROUT", "Right HP Mixer"}, |
| {"Right HPCOM Mux", "constant VCM", "Right HPCOM Mixer"}, |
| {"Right HPCOM Mux", "single-ended", "Right HPCOM Mixer"}, |
| {"Right HPCOM Mux", "differential of HPLCOM", "Left HPCOM Mixer"}, |
| {"Right HPCOM Mux", "external feedback", "Right HPCOM Mixer"}, |
| {"Right HP Com", NULL, "Right HPCOM Mux"}, |
| {"HPRCOM", NULL, "Right HP Com"}, |
| }; |
| |
| static const struct snd_soc_dapm_route intercon_3007[] = { |
| /* Class-D outputs */ |
| {"Left Class-D Out", NULL, "Left Line Out"}, |
| {"Right Class-D Out", NULL, "Left Line Out"}, |
| {"SPOP", NULL, "Left Class-D Out"}, |
| {"SPOM", NULL, "Right Class-D Out"}, |
| }; |
| |
| static int aic3x_add_widgets(struct snd_soc_codec *codec) |
| { |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| |
| snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets, |
| ARRAY_SIZE(aic3x_dapm_widgets)); |
| |
| /* set up audio path interconnects */ |
| snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); |
| |
| if (aic3x->model == AIC3X_MODEL_3007) { |
| snd_soc_dapm_new_controls(codec, aic3007_dapm_widgets, |
| ARRAY_SIZE(aic3007_dapm_widgets)); |
| snd_soc_dapm_add_routes(codec, intercon_3007, ARRAY_SIZE(intercon_3007)); |
| } |
| |
| return 0; |
| } |
| |
| static int aic3x_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_codec *codec =rtd->codec; |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0; |
| u8 data, j, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1; |
| u16 d, pll_d = 1; |
| u8 reg; |
| int clk; |
| |
| /* select data word length */ |
| data = |
| aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4)); |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| break; |
| case SNDRV_PCM_FORMAT_S20_3LE: |
| data |= (0x01 << 4); |
| break; |
| case SNDRV_PCM_FORMAT_S24_LE: |
| data |= (0x02 << 4); |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| data |= (0x03 << 4); |
| break; |
| } |
| aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data); |
| |
| /* Fsref can be 44100 or 48000 */ |
| fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000; |
| |
| /* Try to find a value for Q which allows us to bypass the PLL and |
| * generate CODEC_CLK directly. */ |
| for (pll_q = 2; pll_q < 18; pll_q++) |
| if (aic3x->sysclk / (128 * pll_q) == fsref) { |
| bypass_pll = 1; |
| break; |
| } |
| |
| if (bypass_pll) { |
| pll_q &= 0xf; |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT); |
| aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV); |
| /* disable PLL if it is bypassed */ |
| reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE); |
| |
| } else { |
| aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV); |
| /* enable PLL when it is used */ |
| reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE); |
| } |
| |
| /* Route Left DAC to left channel input and |
| * right DAC to right channel input */ |
| data = (LDAC2LCH | RDAC2RCH); |
| data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000; |
| if (params_rate(params) >= 64000) |
| data |= DUAL_RATE_MODE; |
| aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data); |
| |
| /* codec sample rate select */ |
| data = (fsref * 20) / params_rate(params); |
| if (params_rate(params) < 64000) |
| data /= 2; |
| data /= 5; |
| data -= 2; |
| data |= (data << 4); |
| aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data); |
| |
| if (bypass_pll) |
| return 0; |
| |
| /* Use PLL, compute apropriate setup for j, d, r and p, the closest |
| * one wins the game. Try with d==0 first, next with d!=0. |
| * Constraints for j are according to the datasheet. |
| * The sysclk is divided by 1000 to prevent integer overflows. |
| */ |
| |
| codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000); |
| |
| for (r = 1; r <= 16; r++) |
| for (p = 1; p <= 8; p++) { |
| for (j = 4; j <= 55; j++) { |
| /* This is actually 1000*((j+(d/10000))*r)/p |
| * The term had to be converted to get |
| * rid of the division by 10000; d = 0 here |
| */ |
| int tmp_clk = (1000 * j * r) / p; |
| |
| /* Check whether this values get closer than |
| * the best ones we had before |
| */ |
| if (abs(codec_clk - tmp_clk) < |
| abs(codec_clk - last_clk)) { |
| pll_j = j; pll_d = 0; |
| pll_r = r; pll_p = p; |
| last_clk = tmp_clk; |
| } |
| |
| /* Early exit for exact matches */ |
| if (tmp_clk == codec_clk) |
| goto found; |
| } |
| } |
| |
| /* try with d != 0 */ |
| for (p = 1; p <= 8; p++) { |
| j = codec_clk * p / 1000; |
| |
| if (j < 4 || j > 11) |
| continue; |
| |
| /* do not use codec_clk here since we'd loose precision */ |
| d = ((2048 * p * fsref) - j * aic3x->sysclk) |
| * 100 / (aic3x->sysclk/100); |
| |
| clk = (10000 * j + d) / (10 * p); |
| |
| /* check whether this values get closer than the best |
| * ones we had before */ |
| if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) { |
| pll_j = j; pll_d = d; pll_r = 1; pll_p = p; |
| last_clk = clk; |
| } |
| |
| /* Early exit for exact matches */ |
| if (clk == codec_clk) |
| goto found; |
| } |
| |
| if (last_clk == 0) { |
| printk(KERN_ERR "%s(): unable to setup PLL\n", __func__); |
| return -EINVAL; |
| } |
| |
| found: |
| data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); |
| aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT); |
| aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT); |
| aic3x_write(codec, AIC3X_PLL_PROGC_REG, (pll_d >> 6) << PLLD_MSB_SHIFT); |
| aic3x_write(codec, AIC3X_PLL_PROGD_REG, |
| (pll_d & 0x3F) << PLLD_LSB_SHIFT); |
| |
| return 0; |
| } |
| |
| static int aic3x_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| u8 ldac_reg = aic3x_read_reg_cache(codec, LDAC_VOL) & ~MUTE_ON; |
| u8 rdac_reg = aic3x_read_reg_cache(codec, RDAC_VOL) & ~MUTE_ON; |
| |
| if (mute) { |
| aic3x_write(codec, LDAC_VOL, ldac_reg | MUTE_ON); |
| aic3x_write(codec, RDAC_VOL, rdac_reg | MUTE_ON); |
| } else { |
| aic3x_write(codec, LDAC_VOL, ldac_reg); |
| aic3x_write(codec, RDAC_VOL, rdac_reg); |
| } |
| |
| return 0; |
| } |
| |
| static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| |
| aic3x->sysclk = freq; |
| return 0; |
| } |
| |
| static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai, |
| unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| u8 iface_areg, iface_breg; |
| int delay = 0; |
| |
| iface_areg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f; |
| iface_breg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f; |
| |
| /* set master/slave audio interface */ |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| aic3x->master = 1; |
| iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| aic3x->master = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* |
| * match both interface format and signal polarities since they |
| * are fixed |
| */ |
| switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | |
| SND_SOC_DAIFMT_INV_MASK)) { |
| case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF): |
| break; |
| case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF): |
| delay = 1; |
| case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF): |
| iface_breg |= (0x01 << 6); |
| break; |
| case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF): |
| iface_breg |= (0x02 << 6); |
| break; |
| case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF): |
| iface_breg |= (0x03 << 6); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| /* set iface */ |
| aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg); |
| aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg); |
| aic3x_write(codec, AIC3X_ASD_INTF_CTRLC, delay); |
| |
| return 0; |
| } |
| |
| static int aic3x_set_bias_level(struct snd_soc_codec *codec, |
| enum snd_soc_bias_level level) |
| { |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| u8 reg; |
| |
| switch (level) { |
| case SND_SOC_BIAS_ON: |
| break; |
| case SND_SOC_BIAS_PREPARE: |
| if (aic3x->master) { |
| /* enable pll */ |
| reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, |
| reg | PLL_ENABLE); |
| } |
| break; |
| case SND_SOC_BIAS_STANDBY: |
| /* fall through and disable pll */ |
| case SND_SOC_BIAS_OFF: |
| if (aic3x->master) { |
| /* disable pll */ |
| reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); |
| aic3x_write(codec, AIC3X_PLL_PROGA_REG, |
| reg & ~PLL_ENABLE); |
| } |
| break; |
| } |
| codec->bias_level = level; |
| |
| return 0; |
| } |
| |
| void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state) |
| { |
| u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG; |
| u8 bit = gpio ? 3: 0; |
| u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit); |
| aic3x_write(codec, reg, val | (!!state << bit)); |
| } |
| EXPORT_SYMBOL_GPL(aic3x_set_gpio); |
| |
| int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio) |
| { |
| u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG; |
| u8 val, bit = gpio ? 2: 1; |
| |
| aic3x_read(codec, reg, &val); |
| return (val >> bit) & 1; |
| } |
| EXPORT_SYMBOL_GPL(aic3x_get_gpio); |
| |
| void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect, |
| int headset_debounce, int button_debounce) |
| { |
| u8 val; |
| |
| val = ((detect & AIC3X_HEADSET_DETECT_MASK) |
| << AIC3X_HEADSET_DETECT_SHIFT) | |
| ((headset_debounce & AIC3X_HEADSET_DEBOUNCE_MASK) |
| << AIC3X_HEADSET_DEBOUNCE_SHIFT) | |
| ((button_debounce & AIC3X_BUTTON_DEBOUNCE_MASK) |
| << AIC3X_BUTTON_DEBOUNCE_SHIFT); |
| |
| if (detect & AIC3X_HEADSET_DETECT_MASK) |
| val |= AIC3X_HEADSET_DETECT_ENABLED; |
| |
| aic3x_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val); |
| } |
| EXPORT_SYMBOL_GPL(aic3x_set_headset_detection); |
| |
| int aic3x_headset_detected(struct snd_soc_codec *codec) |
| { |
| u8 val; |
| aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val); |
| return (val >> 4) & 1; |
| } |
| EXPORT_SYMBOL_GPL(aic3x_headset_detected); |
| |
| int aic3x_button_pressed(struct snd_soc_codec *codec) |
| { |
| u8 val; |
| aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val); |
| return (val >> 5) & 1; |
| } |
| EXPORT_SYMBOL_GPL(aic3x_button_pressed); |
| |
| #define AIC3X_RATES SNDRV_PCM_RATE_8000_96000 |
| #define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_ops aic3x_dai_ops = { |
| .hw_params = aic3x_hw_params, |
| .digital_mute = aic3x_mute, |
| .set_sysclk = aic3x_set_dai_sysclk, |
| .set_fmt = aic3x_set_dai_fmt, |
| }; |
| |
| static struct snd_soc_dai_driver aic3x_dai = { |
| .name = "tlv320aic3x-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = AIC3X_RATES, |
| .formats = AIC3X_FORMATS,}, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 1, |
| .channels_max = 2, |
| .rates = AIC3X_RATES, |
| .formats = AIC3X_FORMATS,}, |
| .ops = &aic3x_dai_ops, |
| .symmetric_rates = 1, |
| }; |
| |
| static int aic3x_suspend(struct snd_soc_codec *codec, pm_message_t state) |
| { |
| aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| |
| return 0; |
| } |
| |
| static int aic3x_resume(struct snd_soc_codec *codec) |
| { |
| int i; |
| u8 data[2]; |
| u8 *cache = codec->reg_cache; |
| |
| /* Sync reg_cache with the hardware */ |
| for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) { |
| data[0] = i; |
| data[1] = cache[i]; |
| codec->hw_write(codec->control_data, data, 2); |
| } |
| |
| aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| return 0; |
| } |
| |
| /* |
| * initialise the AIC3X driver |
| * register the mixer and dsp interfaces with the kernel |
| */ |
| static int aic3x_init(struct snd_soc_codec *codec) |
| { |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| int reg; |
| |
| aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT); |
| aic3x_write(codec, AIC3X_RESET, SOFT_RESET); |
| |
| /* DAC default volume and mute */ |
| aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON); |
| aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON); |
| |
| /* DAC to HP default volume and route to Output mixer */ |
| aic3x_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON); |
| aic3x_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON); |
| aic3x_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON); |
| aic3x_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON); |
| /* DAC to Line Out default volume and route to Output mixer */ |
| aic3x_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON); |
| aic3x_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON); |
| /* DAC to Mono Line Out default volume and route to Output mixer */ |
| aic3x_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); |
| aic3x_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON); |
| |
| /* unmute all outputs */ |
| reg = aic3x_read_reg_cache(codec, LLOPM_CTRL); |
| aic3x_write(codec, LLOPM_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, RLOPM_CTRL); |
| aic3x_write(codec, RLOPM_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL); |
| aic3x_write(codec, MONOLOPM_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL); |
| aic3x_write(codec, HPLOUT_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, HPROUT_CTRL); |
| aic3x_write(codec, HPROUT_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL); |
| aic3x_write(codec, HPLCOM_CTRL, reg | UNMUTE); |
| reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL); |
| aic3x_write(codec, HPRCOM_CTRL, reg | UNMUTE); |
| |
| /* ADC default volume and unmute */ |
| aic3x_write(codec, LADC_VOL, DEFAULT_GAIN); |
| aic3x_write(codec, RADC_VOL, DEFAULT_GAIN); |
| /* By default route Line1 to ADC PGA mixer */ |
| aic3x_write(codec, LINE1L_2_LADC_CTRL, 0x0); |
| aic3x_write(codec, LINE1R_2_RADC_CTRL, 0x0); |
| |
| /* PGA to HP Bypass default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL); |
| aic3x_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL); |
| aic3x_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL); |
| /* PGA to Line Out default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL); |
| /* PGA to Mono Line Out default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL); |
| |
| /* Line2 to HP Bypass default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL); |
| aic3x_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL); |
| aic3x_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL); |
| /* Line2 Line Out default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL); |
| /* Line2 to Mono Out default volume, disconnect from Output Mixer */ |
| aic3x_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL); |
| aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL); |
| |
| if (aic3x->model == AIC3X_MODEL_3007) { |
| /* Class-D speaker driver init; datasheet p. 46 */ |
| aic3x_write(codec, AIC3X_PAGE_SELECT, 0x0D); |
| aic3x_write(codec, 0xD, 0x0D); |
| aic3x_write(codec, 0x8, 0x5C); |
| aic3x_write(codec, 0x8, 0x5D); |
| aic3x_write(codec, 0x8, 0x5C); |
| aic3x_write(codec, AIC3X_PAGE_SELECT, 0x00); |
| aic3x_write(codec, CLASSD_CTRL, 0); |
| } |
| |
| /* off, with power on */ |
| aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); |
| |
| return 0; |
| } |
| |
| static int aic3x_probe(struct snd_soc_codec *codec) |
| { |
| struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec); |
| |
| codec->hw_write = (hw_write_t) i2c_master_send; |
| codec->control_data = aic3x->control_data; |
| |
| aic3x_init(codec); |
| |
| if (aic3x->setup) { |
| /* setup GPIO functions */ |
| aic3x_write(codec, AIC3X_GPIO1_REG, |
| (aic3x->setup->gpio_func[0] & 0xf) << 4); |
| aic3x_write(codec, AIC3X_GPIO2_REG, |
| (aic3x->setup->gpio_func[1] & 0xf) << 4); |
| } |
| |
| snd_soc_add_controls(codec, aic3x_snd_controls, |
| ARRAY_SIZE(aic3x_snd_controls)); |
| if (aic3x->model == AIC3X_MODEL_3007) |
| snd_soc_add_controls(codec, &aic3x_classd_amp_gain_ctrl, 1); |
| |
| aic3x_add_widgets(codec); |
| |
| return 0; |
| } |
| |
| static int aic3x_remove(struct snd_soc_codec *codec) |
| { |
| aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver soc_codec_dev_aic3x = { |
| .read = aic3x_read_reg_cache, |
| .write = aic3x_write, |
| .set_bias_level = aic3x_set_bias_level, |
| .reg_cache_size = ARRAY_SIZE(aic3x_reg), |
| .reg_word_size = sizeof(u8), |
| .reg_cache_default = aic3x_reg, |
| .probe = aic3x_probe, |
| .remove = aic3x_remove, |
| .suspend = aic3x_suspend, |
| .resume = aic3x_resume, |
| }; |
| |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| /* |
| * AIC3X 2 wire address can be up to 4 devices with device addresses |
| * 0x18, 0x19, 0x1A, 0x1B |
| */ |
| |
| static const struct i2c_device_id aic3x_i2c_id[] = { |
| [AIC3X_MODEL_3X] = { "tlv320aic3x", 0 }, |
| [AIC3X_MODEL_33] = { "tlv320aic33", 0 }, |
| [AIC3X_MODEL_3007] = { "tlv320aic3007", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id); |
| |
| /* |
| * If the i2c layer weren't so broken, we could pass this kind of data |
| * around |
| */ |
| static int aic3x_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct aic3x_pdata *pdata = i2c->dev.platform_data; |
| struct aic3x_priv *aic3x; |
| int ret, i; |
| const struct i2c_device_id *tbl; |
| |
| aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL); |
| if (aic3x == NULL) { |
| dev_err(&i2c->dev, "failed to create private data\n"); |
| return -ENOMEM; |
| } |
| |
| aic3x->control_data = i2c; |
| i2c_set_clientdata(i2c, aic3x); |
| if (pdata) { |
| aic3x->gpio_reset = pdata->gpio_reset; |
| aic3x->setup = pdata->setup; |
| } else { |
| aic3x->gpio_reset = -1; |
| } |
| |
| if (aic3x->gpio_reset >= 0) { |
| ret = gpio_request(aic3x->gpio_reset, "tlv320aic3x reset"); |
| if (ret != 0) |
| goto err_gpio; |
| gpio_direction_output(aic3x->gpio_reset, 0); |
| } |
| |
| for (tbl = aic3x_i2c_id; tbl->name[0]; tbl++) { |
| if (!strcmp(tbl->name, id->name)) |
| break; |
| } |
| aic3x->model = tbl - aic3x_i2c_id; |
| |
| for (i = 0; i < ARRAY_SIZE(aic3x->supplies); i++) |
| aic3x->supplies[i].supply = aic3x_supply_names[i]; |
| |
| ret = regulator_bulk_get(&i2c->dev, ARRAY_SIZE(aic3x->supplies), |
| aic3x->supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); |
| goto err_get; |
| } |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(aic3x->supplies), |
| aic3x->supplies); |
| if (ret != 0) { |
| dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); |
| goto err_enable; |
| } |
| |
| if (aic3x->gpio_reset >= 0) { |
| udelay(1); |
| gpio_set_value(aic3x->gpio_reset, 1); |
| } |
| |
| ret = snd_soc_register_codec(&i2c->dev, |
| &soc_codec_dev_aic3x, &aic3x_dai, 1); |
| if (ret < 0) |
| goto err_enable; |
| return ret; |
| |
| err_enable: |
| regulator_bulk_free(ARRAY_SIZE(aic3x->supplies), aic3x->supplies); |
| err_get: |
| if (aic3x->gpio_reset >= 0) |
| gpio_free(aic3x->gpio_reset); |
| err_gpio: |
| kfree(aic3x); |
| return ret; |
| } |
| |
| static int aic3x_i2c_remove(struct i2c_client *client) |
| { |
| struct aic3x_priv *aic3x = i2c_get_clientdata(client); |
| |
| if (aic3x->gpio_reset >= 0) { |
| gpio_set_value(aic3x->gpio_reset, 0); |
| gpio_free(aic3x->gpio_reset); |
| } |
| regulator_bulk_disable(ARRAY_SIZE(aic3x->supplies), aic3x->supplies); |
| regulator_bulk_free(ARRAY_SIZE(aic3x->supplies), aic3x->supplies); |
| |
| snd_soc_unregister_codec(&client->dev); |
| kfree(i2c_get_clientdata(client)); |
| return 0; |
| } |
| |
| /* machine i2c codec control layer */ |
| static struct i2c_driver aic3x_i2c_driver = { |
| .driver = { |
| .name = "tlv320aic3x-codec", |
| .owner = THIS_MODULE, |
| }, |
| .probe = aic3x_i2c_probe, |
| .remove = aic3x_i2c_remove, |
| .id_table = aic3x_i2c_id, |
| }; |
| |
| static inline void aic3x_i2c_init(void) |
| { |
| int ret; |
| |
| ret = i2c_add_driver(&aic3x_i2c_driver); |
| if (ret) |
| printk(KERN_ERR "%s: error regsitering i2c driver, %d\n", |
| __func__, ret); |
| } |
| |
| static inline void aic3x_i2c_exit(void) |
| { |
| i2c_del_driver(&aic3x_i2c_driver); |
| } |
| #endif |
| |
| static int __init aic3x_modinit(void) |
| { |
| int ret = 0; |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| ret = i2c_add_driver(&aic3x_i2c_driver); |
| if (ret != 0) { |
| printk(KERN_ERR "Failed to register TLV320AIC3x I2C driver: %d\n", |
| ret); |
| } |
| #endif |
| return ret; |
| } |
| module_init(aic3x_modinit); |
| |
| static void __exit aic3x_exit(void) |
| { |
| #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) |
| i2c_del_driver(&aic3x_i2c_driver); |
| #endif |
| } |
| module_exit(aic3x_exit); |
| |
| MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver"); |
| MODULE_AUTHOR("Vladimir Barinov"); |
| MODULE_LICENSE("GPL"); |