Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / c89b73703ea3e61ab233560d2c6c4fc0963111dc / . / drivers / bluetooth / btusb.c
blob: b876888811432a9bad46ab73a32ca40b04ed2ce4 [file] [log] [blame]
/*
*
* Generic Bluetooth USB driver
*
* Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#define VERSION "0.7"
static bool disable_scofix;
static bool force_scofix;
static bool reset = 1;
static struct usb_driver btusb_driver;
#define BTUSB_IGNORE 0x01
#define BTUSB_DIGIANSWER 0x02
#define BTUSB_CSR 0x04
#define BTUSB_SNIFFER 0x08
#define BTUSB_BCM92035 0x10
#define BTUSB_BROKEN_ISOC 0x20
#define BTUSB_WRONG_SCO_MTU 0x40
#define BTUSB_ATH3012 0x80
#define BTUSB_INTEL 0x100
#define BTUSB_INTEL_BOOT 0x200
#define BTUSB_BCM_PATCHRAM 0x400
#define BTUSB_MARVELL 0x800
#define BTUSB_SWAVE 0x1000
#define BTUSB_INTEL_NEW 0x2000
#define BTUSB_AMP 0x4000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x01) },
/* Generic Bluetooth AMP device */
{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
/* Apple-specific (Broadcom) devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
/* MediaTek MT76x0E */
{ USB_DEVICE(0x0e8d, 0x763f) },
/* Broadcom SoftSailing reporting vendor specific */
{ USB_DEVICE(0x0a5c, 0x21e1) },
/* Apple MacBookPro 7,1 */
{ USB_DEVICE(0x05ac, 0x8213) },
/* Apple iMac11,1 */
{ USB_DEVICE(0x05ac, 0x8215) },
/* Apple MacBookPro6,2 */
{ USB_DEVICE(0x05ac, 0x8218) },
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
/* Apple MacBookAir4,1 */
{ USB_DEVICE(0x05ac, 0x821f) },
/* Apple MacBookPro8,2 */
{ USB_DEVICE(0x05ac, 0x821a) },
/* Apple MacMini5,1 */
{ USB_DEVICE(0x05ac, 0x8281) },
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800), .driver_info = BTUSB_SWAVE },
/* Bluetooth Ultraport Module from IBM */
{ USB_DEVICE(0x04bf, 0x030a) },
/* ALPS Modules with non-standard id */
{ USB_DEVICE(0x044e, 0x3001) },
{ USB_DEVICE(0x044e, 0x3002) },
/* Ericsson with non-standard id */
{ USB_DEVICE(0x0bdb, 0x1002) },
/* Canyon CN-BTU1 with HID interfaces */
{ USB_DEVICE(0x0c10, 0x0000) },
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0489, 0xe042) },
{ USB_DEVICE(0x04ca, 0x2003) },
{ USB_DEVICE(0x0b05, 0x17b5) },
{ USB_DEVICE(0x0b05, 0x17cb) },
{ USB_DEVICE(0x413c, 0x8197) },
{ USB_DEVICE(0x13d3, 0x3404),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom BCM20702B0 (Dynex/Insignia) */
{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
/* Foxconn - Hon Hai */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0489, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Lite-On Technology - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x04ca, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Broadcom devices with vendor specific id */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* ASUSTek Computer - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
/* Belkin F8065bf - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
/* IMC Networks - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
/* Intel Bluetooth USB Bootloader (RAM module) */
{ USB_DEVICE(0x8087, 0x0a5a),
.driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, btusb_table);
static const struct usb_device_id blacklist_table[] = {
/* CSR BlueCore devices */
{ USB_DEVICE(0x0a12, 0x0001), .driver_info = BTUSB_CSR },
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
/* Atheros 3011 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Broadcom BCM2045 */
{ USB_DEVICE(0x0a5c, 0x2039), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = BTUSB_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0a5c, 0x201e), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2110), .driver_info = BTUSB_WRONG_SCO_MTU },
/* HP laptop with Broadcom chip */
{ USB_DEVICE(0x03f0, 0x171d), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell laptop with Broadcom chip */
{ USB_DEVICE(0x413c, 0x8126), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Dell Wireless 370 and 410 devices */
{ USB_DEVICE(0x413c, 0x8152), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x413c, 0x8156), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Asus WL-BTD202 device */
{ USB_DEVICE(0x0b05, 0x1715), .driver_info = BTUSB_WRONG_SCO_MTU },
/* Kensington Bluetooth USB adapter */
{ USB_DEVICE(0x047d, 0x105e), .driver_info = BTUSB_WRONG_SCO_MTU },
/* RTX Telecom based adapters with buggy SCO support */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = BTUSB_BROKEN_ISOC },
{ USB_DEVICE(0x0400, 0x080a), .driver_info = BTUSB_BROKEN_ISOC },
/* CONWISE Technology based adapters with buggy SCO support */
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
{ USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
/* CSR BlueCore Bluetooth Sniffer */
{ USB_DEVICE(0x0a12, 0x0002),
.driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Frontline ComProbe Bluetooth Sniffer */
{ USB_DEVICE(0x16d3, 0x0002),
.driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Marvell Bluetooth devices */
{ USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
{ USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
/* Intel Bluetooth devices */
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW },
/* Other Intel Bluetooth devices */
{ USB_VENDOR_AND_INTERFACE_INFO(0x8087, 0xe0, 0x01, 0x01),
.driver_info = BTUSB_IGNORE },
{ } /* Terminating entry */
};
#define BTUSB_MAX_ISOC_FRAMES 10
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
#define BTUSB_ISOC_RUNNING 2
#define BTUSB_SUSPENDING 3
#define BTUSB_DID_ISO_RESUME 4
#define BTUSB_BOOTLOADER 5
#define BTUSB_DOWNLOADING 6
#define BTUSB_FIRMWARE_LOADED 7
#define BTUSB_FIRMWARE_FAILED 8
#define BTUSB_BOOTING 9
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
struct usb_interface *intf;
struct usb_interface *isoc;
unsigned long flags;
struct work_struct work;
struct work_struct waker;
struct usb_anchor deferred;
struct usb_anchor tx_anchor;
int tx_in_flight;
spinlock_t txlock;
struct usb_anchor intr_anchor;
struct usb_anchor bulk_anchor;
struct usb_anchor isoc_anchor;
spinlock_t rxlock;
struct sk_buff *evt_skb;
struct sk_buff *acl_skb;
struct sk_buff *sco_skb;
struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
struct usb_endpoint_descriptor *bulk_rx_ep;
struct usb_endpoint_descriptor *isoc_tx_ep;
struct usb_endpoint_descriptor *isoc_rx_ep;
__u8 cmdreq_type;
__u8 cmdreq;
unsigned int sco_num;
int isoc_altsetting;
int suspend_count;
int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
};
static int btusb_wait_on_bit_timeout(void *word, int bit, unsigned long timeout,
unsigned mode)
{
might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_timeout(word, bit, bit_wait_timeout,
mode, timeout);
}
static inline void btusb_free_frags(struct btusb_data *data)
{
unsigned long flags;
spin_lock_irqsave(&data->rxlock, flags);
kfree_skb(data->evt_skb);
data->evt_skb = NULL;
kfree_skb(data->acl_skb);
data->acl_skb = NULL;
kfree_skb(data->sco_skb);
data->sco_skb = NULL;
spin_unlock_irqrestore(&data->rxlock, flags);
}
static int btusb_recv_intr(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
int err = 0;
spin_lock(&data->rxlock);
skb = data->evt_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_EVENT_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
bt_cb(skb)->expect = HCI_EVENT_HDR_SIZE;
}
len = min_t(uint, bt_cb(skb)->expect, count);
memcpy(skb_put(skb, len), buffer, len);
count -= len;
buffer += len;
bt_cb(skb)->expect -= len;
if (skb->len == HCI_EVENT_HDR_SIZE) {
/* Complete event header */
bt_cb(skb)->expect = hci_event_hdr(skb)->plen;
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (bt_cb(skb)->expect == 0) {
/* Complete frame */
data->recv_event(data->hdev, skb);
skb = NULL;
}
}
data->evt_skb = skb;
spin_unlock(&data->rxlock);
return err;
}
static int btusb_recv_bulk(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
int err = 0;
spin_lock(&data->rxlock);
skb = data->acl_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
bt_cb(skb)->expect = HCI_ACL_HDR_SIZE;
}
len = min_t(uint, bt_cb(skb)->expect, count);
memcpy(skb_put(skb, len), buffer, len);
count -= len;
buffer += len;
bt_cb(skb)->expect -= len;
if (skb->len == HCI_ACL_HDR_SIZE) {
__le16 dlen = hci_acl_hdr(skb)->dlen;
/* Complete ACL header */
bt_cb(skb)->expect = __le16_to_cpu(dlen);
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (bt_cb(skb)->expect == 0) {
/* Complete frame */
hci_recv_frame(data->hdev, skb);
skb = NULL;
}
}
data->acl_skb = skb;
spin_unlock(&data->rxlock);
return err;
}
static int btusb_recv_isoc(struct btusb_data *data, void *buffer, int count)
{
struct sk_buff *skb;
int err = 0;
spin_lock(&data->rxlock);
skb = data->sco_skb;
while (count) {
int len;
if (!skb) {
skb = bt_skb_alloc(HCI_MAX_SCO_SIZE, GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
break;
}
bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
bt_cb(skb)->expect = HCI_SCO_HDR_SIZE;
}
len = min_t(uint, bt_cb(skb)->expect, count);
memcpy(skb_put(skb, len), buffer, len);
count -= len;
buffer += len;
bt_cb(skb)->expect -= len;
if (skb->len == HCI_SCO_HDR_SIZE) {
/* Complete SCO header */
bt_cb(skb)->expect = hci_sco_hdr(skb)->dlen;
if (skb_tailroom(skb) < bt_cb(skb)->expect) {
kfree_skb(skb);
skb = NULL;
err = -EILSEQ;
break;
}
}
if (bt_cb(skb)->expect == 0) {
/* Complete frame */
hci_recv_frame(data->hdev, skb);
skb = NULL;
}
}
data->sco_skb = skb;
spin_unlock(&data->rxlock);
return err;
}
static void btusb_intr_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
hdev->stat.byte_rx += urb->actual_length;
if (btusb_recv_intr(data, urb->transfer_buffer,
urb->actual_length) < 0) {
BT_ERR("%s corrupted event packet", hdev->name);
hdev->stat.err_rx++;
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_INTR_RUNNING, &data->flags))
return;
usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size;
BT_DBG("%s", hdev->name);
if (!data->intr_ep)
return -ENODEV;
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->intr_ep->wMaxPacketSize);
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvintpipe(data->udev, data->intr_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe, buf, size,
btusb_intr_complete, hdev, data->intr_ep->bInterval);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_anchor_urb(urb, &data->intr_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_bulk_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
hdev->stat.byte_rx += urb->actual_length;
if (data->recv_bulk(data, urb->transfer_buffer,
urb->actual_length) < 0) {
BT_ERR("%s corrupted ACL packet", hdev->name);
hdev->stat.err_rx++;
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_BULK_RUNNING, &data->flags))
return;
usb_anchor_urb(urb, &data->bulk_anchor);
usb_mark_last_busy(data->udev);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
}
static int btusb_submit_bulk_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size = HCI_MAX_FRAME_SIZE;
BT_DBG("%s", hdev->name);
if (!data->bulk_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(0, mem_flags);
if (!urb)
return -ENOMEM;
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvbulkpipe(data->udev, data->bulk_rx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe, buf, size,
btusb_bulk_complete, hdev);
urb->transfer_flags |= URB_FREE_BUFFER;
usb_mark_last_busy(data->udev);
usb_anchor_urb(urb, &data->bulk_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_isoc_complete(struct urb *urb)
{
struct hci_dev *hdev = urb->context;
struct btusb_data *data = hci_get_drvdata(hdev);
int i, err;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return;
if (urb->status == 0) {
for (i = 0; i < urb->number_of_packets; i++) {
unsigned int offset = urb->iso_frame_desc[i].offset;
unsigned int length = urb->iso_frame_desc[i].actual_length;
if (urb->iso_frame_desc[i].status)
continue;
hdev->stat.byte_rx += length;
if (btusb_recv_isoc(data, urb->transfer_buffer + offset,
length) < 0) {
BT_ERR("%s corrupted SCO packet", hdev->name);
hdev->stat.err_rx++;
}
}
} else if (urb->status == -ENOENT) {
/* Avoid suspend failed when usb_kill_urb */
return;
}
if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
return;
usb_anchor_urb(urb, &data->isoc_anchor);
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
* -ENODEV: device got disconnected */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
}
static inline void __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
{
int i, offset = 0;
BT_DBG("len %d mtu %d", len, mtu);
for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
i++, offset += mtu, len -= mtu) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = mtu;
}
if (len && i < BTUSB_MAX_ISOC_FRAMES) {
urb->iso_frame_desc[i].offset = offset;
urb->iso_frame_desc[i].length = len;
i++;
}
urb->number_of_packets = i;
}
static int btusb_submit_isoc_urb(struct hci_dev *hdev, gfp_t mem_flags)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned char *buf;
unsigned int pipe;
int err, size;
BT_DBG("%s", hdev->name);
if (!data->isoc_rx_ep)
return -ENODEV;
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, mem_flags);
if (!urb)
return -ENOMEM;
size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
BTUSB_MAX_ISOC_FRAMES;
buf = kmalloc(size, mem_flags);
if (!buf) {
usb_free_urb(urb);
return -ENOMEM;
}
pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe, buf, size, btusb_isoc_complete,
hdev, data->isoc_rx_ep->bInterval);
urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
__fill_isoc_descriptor(urb, size,
le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
usb_anchor_urb(urb, &data->isoc_anchor);
err = usb_submit_urb(urb, mem_flags);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
usb_free_urb(urb);
return err;
}
static void btusb_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
struct btusb_data *data = hci_get_drvdata(hdev);
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
done:
spin_lock(&data->txlock);
data->tx_in_flight--;
spin_unlock(&data->txlock);
kfree(urb->setup_packet);
kfree_skb(skb);
}
static void btusb_isoc_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
struct hci_dev *hdev = (struct hci_dev *)skb->dev;
BT_DBG("%s urb %p status %d count %d", hdev->name, urb, urb->status,
urb->actual_length);
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (!urb->status)
hdev->stat.byte_tx += urb->transfer_buffer_length;
else
hdev->stat.err_tx++;
done:
kfree(urb->setup_packet);
kfree_skb(skb);
}
static int btusb_open(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s", hdev->name);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
return err;
data->intf->needs_remote_wakeup = 1;
if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
goto done;
err = btusb_submit_intr_urb(hdev, GFP_KERNEL);
if (err < 0)
goto failed;
err = btusb_submit_bulk_urb(hdev, GFP_KERNEL);
if (err < 0) {
usb_kill_anchored_urbs(&data->intr_anchor);
goto failed;
}
set_bit(BTUSB_BULK_RUNNING, &data->flags);
btusb_submit_bulk_urb(hdev, GFP_KERNEL);
done:
usb_autopm_put_interface(data->intf);
return 0;
failed:
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
clear_bit(HCI_RUNNING, &hdev->flags);
usb_autopm_put_interface(data->intf);
return err;
}
static void btusb_stop_traffic(struct btusb_data *data)
{
usb_kill_anchored_urbs(&data->intr_anchor);
usb_kill_anchored_urbs(&data->bulk_anchor);
usb_kill_anchored_urbs(&data->isoc_anchor);
}
static int btusb_close(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
BT_DBG("%s", hdev->name);
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
cancel_work_sync(&data->work);
cancel_work_sync(&data->waker);
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
btusb_stop_traffic(data);
btusb_free_frags(data);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
goto failed;
data->intf->needs_remote_wakeup = 0;
usb_autopm_put_interface(data->intf);
failed:
usb_scuttle_anchored_urbs(&data->deferred);
return 0;
}
static int btusb_flush(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
BT_DBG("%s", hdev->name);
usb_kill_anchored_urbs(&data->tx_anchor);
btusb_free_frags(data);
return 0;
}
static struct urb *alloc_ctrl_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_ctrlrequest *dr;
struct urb *urb;
unsigned int pipe;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
dr = kmalloc(sizeof(*dr), GFP_KERNEL);
if (!dr) {
usb_free_urb(urb);
return ERR_PTR(-ENOMEM);
}
dr->bRequestType = data->cmdreq_type;
dr->bRequest = data->cmdreq;
dr->wIndex = 0;
dr->wValue = 0;
dr->wLength = __cpu_to_le16(skb->len);
pipe = usb_sndctrlpipe(data->udev, 0x00);
usb_fill_control_urb(urb, data->udev, pipe, (void *)dr,
skb->data, skb->len, btusb_tx_complete, skb);
skb->dev = (void *)hdev;
return urb;
}
static struct urb *alloc_bulk_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned int pipe;
if (!data->bulk_tx_ep)
return ERR_PTR(-ENODEV);
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
pipe = usb_sndbulkpipe(data->udev, data->bulk_tx_ep->bEndpointAddress);
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
skb->dev = (void *)hdev;
return urb;
}
static struct urb *alloc_isoc_urb(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
unsigned int pipe;
if (!data->isoc_tx_ep)
return ERR_PTR(-ENODEV);
urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
if (!urb)
return ERR_PTR(-ENOMEM);
pipe = usb_sndisocpipe(data->udev, data->isoc_tx_ep->bEndpointAddress);
usb_fill_int_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_isoc_tx_complete,
skb, data->isoc_tx_ep->bInterval);
urb->transfer_flags = URB_ISO_ASAP;
__fill_isoc_descriptor(urb, skb->len,
le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
skb->dev = (void *)hdev;
return urb;
}
static int submit_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
int err;
usb_anchor_urb(urb, &data->tx_anchor);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err < 0) {
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p submission failed (%d)",
hdev->name, urb, -err);
kfree(urb->setup_packet);
usb_unanchor_urb(urb);
} else {
usb_mark_last_busy(data->udev);
}
usb_free_urb(urb);
return err;
}
static int submit_or_queue_tx_urb(struct hci_dev *hdev, struct urb *urb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
unsigned long flags;
bool suspending;
spin_lock_irqsave(&data->txlock, flags);
suspending = test_bit(BTUSB_SUSPENDING, &data->flags);
if (!suspending)
data->tx_in_flight++;
spin_unlock_irqrestore(&data->txlock, flags);
if (!suspending)
return submit_tx_urb(hdev, urb);
usb_anchor_urb(urb, &data->deferred);
schedule_work(&data->waker);
usb_free_urb(urb);
return 0;
}
static int btusb_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
struct urb *urb;
BT_DBG("%s", hdev->name);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -EBUSY;
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
urb = alloc_ctrl_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.cmd_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_ACLDATA_PKT:
urb = alloc_bulk_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.acl_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_SCODATA_PKT:
if (hci_conn_num(hdev, SCO_LINK) < 1)
return -ENODEV;
urb = alloc_isoc_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.sco_tx++;
return submit_tx_urb(hdev, urb);
}
return -EILSEQ;
}
static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
{
struct btusb_data *data = hci_get_drvdata(hdev);
BT_DBG("%s evt %d", hdev->name, evt);
if (hci_conn_num(hdev, SCO_LINK) != data->sco_num) {
data->sco_num = hci_conn_num(hdev, SCO_LINK);
schedule_work(&data->work);
}
}
static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_interface *intf = data->isoc;
struct usb_endpoint_descriptor *ep_desc;
int i, err;
if (!data->isoc)
return -ENODEV;
err = usb_set_interface(data->udev, 1, altsetting);
if (err < 0) {
BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
return err;
}
data->isoc_altsetting = altsetting;
data->isoc_tx_ep = NULL;
data->isoc_rx_ep = NULL;
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
data->isoc_tx_ep = ep_desc;
continue;
}
if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
data->isoc_rx_ep = ep_desc;
continue;
}
}
if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
BT_ERR("%s invalid SCO descriptors", hdev->name);
return -ENODEV;
}
return 0;
}
static void btusb_work(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
int new_alts;
int err;
if (data->sco_num > 0) {
if (!test_bit(BTUSB_DID_ISO_RESUME, &data->flags)) {
err = usb_autopm_get_interface(data->isoc ? data->isoc : data->intf);
if (err < 0) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
return;
}
set_bit(BTUSB_DID_ISO_RESUME, &data->flags);
}
if (hdev->voice_setting & 0x0020) {
static const int alts[3] = { 2, 4, 5 };
new_alts = alts[data->sco_num - 1];
} else {
new_alts = data->sco_num;
}
if (data->isoc_altsetting != new_alts) {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
if (__set_isoc_interface(hdev, new_alts) < 0)
return;
}
if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev, GFP_KERNEL) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev, GFP_KERNEL);
}
} else {
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->isoc_anchor);
__set_isoc_interface(hdev, 0);
if (test_and_clear_bit(BTUSB_DID_ISO_RESUME, &data->flags))
usb_autopm_put_interface(data->isoc ? data->isoc : data->intf);
}
}
static void btusb_waker(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, waker);
int err;
err = usb_autopm_get_interface(data->intf);
if (err < 0)
return;
usb_autopm_put_interface(data->intf);
}
static int btusb_setup_bcm92035(struct hci_dev *hdev)
{
struct sk_buff *skb;
u8 val = 0x00;
BT_DBG("%s", hdev->name);
skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
else
kfree_skb(skb);
return 0;
}
static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
struct sk_buff *skb;
int ret;
BT_DBG("%s", hdev->name);
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
return -PTR_ERR(skb);
}
rp = (struct hci_rp_read_local_version *)skb->data;
if (!rp->status) {
if (le16_to_cpu(rp->manufacturer) != 10) {
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
*/
clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* These fake CSR controllers have all a broken
* stored link key handling and so just disable it.
*/
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
&hdev->quirks);
}
}
ret = -bt_to_errno(rp->status);
kfree_skb(skb);
return ret;
}
struct intel_version {
u8 status;
u8 hw_platform;
u8 hw_variant;
u8 hw_revision;
u8 fw_variant;
u8 fw_revision;
u8 fw_build_num;
u8 fw_build_ww;
u8 fw_build_yy;
u8 fw_patch_num;
} __packed;
struct intel_boot_params {
__u8 status;
__u8 otp_format;
__u8 otp_content;
__u8 otp_patch;
__le16 dev_revid;
__u8 secure_boot;
__u8 key_from_hdr;
__u8 key_type;
__u8 otp_lock;
__u8 api_lock;
__u8 debug_lock;
bdaddr_t otp_bdaddr;
__u8 min_fw_build_nn;
__u8 min_fw_build_cw;
__u8 min_fw_build_yy;
__u8 limited_cce;
__u8 unlocked_state;
} __packed;
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
struct intel_version *ver)
{
const struct firmware *fw;
char fwname[64];
int ret;
snprintf(fwname, sizeof(fwname),
"intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
ver->hw_platform, ver->hw_variant, ver->hw_revision,
ver->fw_variant, ver->fw_revision, ver->fw_build_num,
ver->fw_build_ww, ver->fw_build_yy);
ret = request_firmware(&fw, fwname, &hdev->dev);
if (ret < 0) {
if (ret == -EINVAL) {
BT_ERR("%s Intel firmware file request failed (%d)",
hdev->name, ret);
return NULL;
}
BT_ERR("%s failed to open Intel firmware file: %s(%d)",
hdev->name, fwname, ret);
/* If the correct firmware patch file is not found, use the
* default firmware patch file instead
*/
snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
ver->hw_platform, ver->hw_variant);
if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
BT_ERR("%s failed to open default Intel fw file: %s",
hdev->name, fwname);
return NULL;
}
}
BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
return fw;
}
static int btusb_setup_intel_patching(struct hci_dev *hdev,
const struct firmware *fw,
const u8 **fw_ptr, int *disable_patch)
{
struct sk_buff *skb;
struct hci_command_hdr *cmd;
const u8 *cmd_param;
struct hci_event_hdr *evt = NULL;
const u8 *evt_param = NULL;
int remain = fw->size - (*fw_ptr - fw->data);
/* The first byte indicates the types of the patch command or event.
* 0x01 means HCI command and 0x02 is HCI event. If the first bytes
* in the current firmware buffer doesn't start with 0x01 or
* the size of remain buffer is smaller than HCI command header,
* the firmware file is corrupted and it should stop the patching
* process.
*/
if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
return -EINVAL;
}
(*fw_ptr)++;
remain--;
cmd = (struct hci_command_hdr *)(*fw_ptr);
*fw_ptr += sizeof(*cmd);
remain -= sizeof(*cmd);
/* Ensure that the remain firmware data is long enough than the length
* of command parameter. If not, the firmware file is corrupted.
*/
if (remain < cmd->plen) {
BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
return -EFAULT;
}
/* If there is a command that loads a patch in the firmware
* file, then enable the patch upon success, otherwise just
* disable the manufacturer mode, for example patch activation
* is not required when the default firmware patch file is used
* because there are no patch data to load.
*/
if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
*disable_patch = 0;
cmd_param = *fw_ptr;
*fw_ptr += cmd->plen;
remain -= cmd->plen;
/* This reads the expected events when the above command is sent to the
* device. Some vendor commands expects more than one events, for
* example command status event followed by vendor specific event.
* For this case, it only keeps the last expected event. so the command
* can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
* last expected event.
*/
while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
(*fw_ptr)++;
remain--;
evt = (struct hci_event_hdr *)(*fw_ptr);
*fw_ptr += sizeof(*evt);
remain -= sizeof(*evt);
if (remain < evt->plen) {
BT_ERR("%s Intel fw corrupted: invalid evt len",
hdev->name);
return -EFAULT;
}
evt_param = *fw_ptr;
*fw_ptr += evt->plen;
remain -= evt->plen;
}
/* Every HCI commands in the firmware file has its correspond event.
* If event is not found or remain is smaller than zero, the firmware
* file is corrupted.
*/
if (!evt || !evt_param || remain < 0) {
BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
return -EFAULT;
}
skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
cmd_param, evt->evt, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
hdev->name, cmd->opcode, PTR_ERR(skb));
return PTR_ERR(skb);
}
/* It ensures that the returned event matches the event data read from
* the firmware file. At fist, it checks the length and then
* the contents of the event.
*/
if (skb->len != evt->plen) {
BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
if (memcmp(skb->data, evt_param, evt->plen)) {
BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
hdev->name, le16_to_cpu(cmd->opcode));
kfree_skb(skb);
return -EFAULT;
}
kfree_skb(skb);
return 0;
}
#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
static int btusb_check_bdaddr_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
struct hci_rp_read_bd_addr *rp;
skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s reading Intel device address failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*rp)) {
BT_ERR("%s Intel device address length mismatch", hdev->name);
kfree_skb(skb);
return -EIO;
}
rp = (struct hci_rp_read_bd_addr *)skb->data;
if (rp->status) {
BT_ERR("%s Intel device address result failed (%02x)",
hdev->name, rp->status);
kfree_skb(skb);
return -bt_to_errno(rp->status);
}
/* For some Intel based controllers, the default Bluetooth device
* address 00:03:19:9E:8B:00 can be found. These controllers are
* fully operational, but have the danger of duplicate addresses
* and that in turn can cause problems with Bluetooth operation.
*/
if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) {
BT_ERR("%s found Intel default device address (%pMR)",
hdev->name, &rp->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
kfree_skb(skb);
return 0;
}
static int btusb_setup_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
const struct firmware *fw;
const u8 *fw_ptr;
int disable_patch;
struct intel_version *ver;
const u8 mfg_enable[] = { 0x01, 0x00 };
const u8 mfg_disable[] = { 0x00, 0x00 };
const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
const u8 mfg_reset_activate[] = { 0x00, 0x02 };
BT_DBG("%s", hdev->name);
/* The controller has a bug with the first HCI command sent to it
* returning number of completed commands as zero. This would stall the
* command processing in the Bluetooth core.
*
* As a workaround, send HCI Reset command first which will reset the
* number of completed commands and allow normal command processing
* from now on.
*/
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s sending initial HCI reset command failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
/* Read Intel specific controller version first to allow selection of
* which firmware file to load.
*
* The returned information are hardware variant and revision plus
* firmware variant, revision and build number.
*/
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s reading Intel fw version command failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
BT_ERR("%s Intel version event length mismatch", hdev->name);
kfree_skb(skb);
return -EIO;
}
ver = (struct intel_version *)skb->data;
if (ver->status) {
BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
ver->status);
kfree_skb(skb);
return -bt_to_errno(ver->status);
}
BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
hdev->name, ver->hw_platform, ver->hw_variant,
ver->hw_revision, ver->fw_variant, ver->fw_revision,
ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
ver->fw_patch_num);
/* fw_patch_num indicates the version of patch the device currently
* have. If there is no patch data in the device, it is always 0x00.
* So, if it is other than 0x00, no need to patch the deivce again.
*/
if (ver->fw_patch_num) {
BT_INFO("%s: Intel device is already patched. patch num: %02x",
hdev->name, ver->fw_patch_num);
kfree_skb(skb);
btusb_check_bdaddr_intel(hdev);
return 0;
}
/* Opens the firmware patch file based on the firmware version read
* from the controller. If it fails to open the matching firmware
* patch file, it tries to open the default firmware patch file.
* If no patch file is found, allow the device to operate without
* a patch.
*/
fw = btusb_setup_intel_get_fw(hdev, ver);
if (!fw) {
kfree_skb(skb);
btusb_check_bdaddr_intel(hdev);
return 0;
}
fw_ptr = fw->data;
/* This Intel specific command enables the manufacturer mode of the
* controller.
*
* Only while this mode is enabled, the driver can download the
* firmware patch data and configuration parameters.
*/
skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
release_firmware(fw);
return PTR_ERR(skb);
}
if (skb->data[0]) {
u8 evt_status = skb->data[0];
BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
hdev->name, evt_status);
kfree_skb(skb);
release_firmware(fw);
return -bt_to_errno(evt_status);
}
kfree_skb(skb);
disable_patch = 1;
/* The firmware data file consists of list of Intel specific HCI
* commands and its expected events. The first byte indicates the
* type of the message, either HCI command or HCI event.
*
* It reads the command and its expected event from the firmware file,
* and send to the controller. Once __hci_cmd_sync_ev() returns,
* the returned event is compared with the event read from the firmware
* file and it will continue until all the messages are downloaded to
* the controller.
*
* Once the firmware patching is completed successfully,
* the manufacturer mode is disabled with reset and activating the
* downloaded patch.
*
* If the firmware patching fails, the manufacturer mode is
* disabled with reset and deactivating the patch.
*
* If the default patch file is used, no reset is done when disabling
* the manufacturer.
*/
while (fw->size > fw_ptr - fw->data) {
int ret;
ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
&disable_patch);
if (ret < 0)
goto exit_mfg_deactivate;
}
release_firmware(fw);
if (disable_patch)
goto exit_mfg_disable;
/* Patching completed successfully and disable the manufacturer mode
* with reset and activate the downloaded firmware patches.
*/
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
mfg_reset_activate, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
hdev->name);
btusb_check_bdaddr_intel(hdev);
return 0;
exit_mfg_disable:
/* Disable the manufacturer mode without reset */
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
btusb_check_bdaddr_intel(hdev);
return 0;
exit_mfg_deactivate:
release_firmware(fw);
/* Patching failed. Disable the manufacturer mode with reset and
* deactivate the downloaded firmware patches.
*/
skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
mfg_reset_deactivate, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
kfree_skb(skb);
BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
hdev->name);
btusb_check_bdaddr_intel(hdev);
return 0;
}
static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode)
{
struct sk_buff *skb;
struct hci_event_hdr *hdr;
struct hci_ev_cmd_complete *evt;
skb = bt_skb_alloc(sizeof(*hdr) + sizeof(*evt) + 1, GFP_ATOMIC);
if (!skb)
return -ENOMEM;
hdr = (struct hci_event_hdr *)skb_put(skb, sizeof(*hdr));
hdr->evt = HCI_EV_CMD_COMPLETE;
hdr->plen = sizeof(*evt) + 1;
evt = (struct hci_ev_cmd_complete *)skb_put(skb, sizeof(*evt));
evt->ncmd = 0x01;
evt->opcode = cpu_to_le16(opcode);
*skb_put(skb, 1) = 0x00;
bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
return hci_recv_frame(hdev, skb);
}
static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
int count)
{
/* When the device is in bootloader mode, then it can send
* events via the bulk endpoint. These events are treated the
* same way as the ones received from the interrupt endpoint.
*/
if (test_bit(BTUSB_BOOTLOADER, &data->flags))
return btusb_recv_intr(data, buffer, count);
return btusb_recv_bulk(data, buffer, count);
}
static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
struct hci_event_hdr *hdr = (void *)skb->data;
/* When the firmware loading completes the device sends
* out a vendor specific event indicating the result of
* the firmware loading.
*/
if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
skb->data[2] == 0x06) {
if (skb->data[3] != 0x00)
test_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
if (test_and_clear_bit(BTUSB_DOWNLOADING,
&data->flags) &&
test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
smp_mb__after_atomic();
wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
}
}
/* When switching to the operational firmware the device
* sends a vendor specific event indicating that the bootup
* completed.
*/
if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
skb->data[2] == 0x02) {
if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
smp_mb__after_atomic();
wake_up_bit(&data->flags, BTUSB_BOOTING);
}
}
}
return hci_recv_frame(hdev, skb);
}
static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct urb *urb;
BT_DBG("%s", hdev->name);
if (!test_bit(HCI_RUNNING, &hdev->flags))
return -EBUSY;
switch (bt_cb(skb)->pkt_type) {
case HCI_COMMAND_PKT:
if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
struct hci_command_hdr *cmd = (void *)skb->data;
__u16 opcode = le16_to_cpu(cmd->opcode);
/* When in bootloader mode and the command 0xfc09
* is received, it needs to be send down the
* bulk endpoint. So allocate a bulk URB instead.
*/
if (opcode == 0xfc09)
urb = alloc_bulk_urb(hdev, skb);
else
urb = alloc_ctrl_urb(hdev, skb);
/* When the 0xfc01 command is issued to boot into
* the operational firmware, it will actually not
* send a command complete event. To keep the flow
* control working inject that event here.
*/
if (opcode == 0xfc01)
inject_cmd_complete(hdev, opcode);
} else {
urb = alloc_ctrl_urb(hdev, skb);
}
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.cmd_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_ACLDATA_PKT:
urb = alloc_bulk_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.acl_tx++;
return submit_or_queue_tx_urb(hdev, urb);
case HCI_SCODATA_PKT:
if (hci_conn_num(hdev, SCO_LINK) < 1)
return -ENODEV;
urb = alloc_isoc_urb(hdev, skb);
if (IS_ERR(urb))
return PTR_ERR(urb);
hdev->stat.sco_tx++;
return submit_tx_urb(hdev, urb);
}
return -EILSEQ;
}
static int btusb_intel_secure_send(struct hci_dev *hdev, u8 fragment_type,
u32 plen, const void *param)
{
while (plen > 0) {
struct sk_buff *skb;
u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
cmd_param[0] = fragment_type;
memcpy(cmd_param + 1, param, fragment_len);
skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
cmd_param, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
kfree_skb(skb);
plen -= fragment_len;
param += fragment_len;
}
return 0;
}
static void btusb_intel_version_info(struct hci_dev *hdev,
struct intel_version *ver)
{
const char *variant;
switch (ver->fw_variant) {
case 0x06:
variant = "Bootloader";
break;
case 0x23:
variant = "Firmware";
break;
default:
return;
}
BT_INFO("%s: %s revision %u.%u build %u week %u %u", hdev->name,
variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
ver->fw_build_num, ver->fw_build_ww, 2000 + ver->fw_build_yy);
}
static int btusb_setup_intel_new(struct hci_dev *hdev)
{
static const u8 reset_param[] = { 0x00, 0x01, 0x00, 0x01,
0x00, 0x08, 0x04, 0x00 };
struct btusb_data *data = hci_get_drvdata(hdev);
struct sk_buff *skb;
struct intel_version *ver;
struct intel_boot_params *params;
const struct firmware *fw;
const u8 *fw_ptr;
char fwname[64];
ktime_t calltime, delta, rettime;
unsigned long long duration;
int err;
BT_DBG("%s", hdev->name);
calltime = ktime_get();
/* Read the Intel version information to determine if the device
* is in bootloader mode or if it already has operational firmware
* loaded.
*/
skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reading Intel version information failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
BT_ERR("%s: Intel version event size mismatch", hdev->name);
kfree_skb(skb);
return -EILSEQ;
}
ver = (struct intel_version *)skb->data;
if (ver->status) {
BT_ERR("%s: Intel version command failure (%02x)",
hdev->name, ver->status);
err = -bt_to_errno(ver->status);
kfree_skb(skb);
return err;
}
/* The hardware platform number has a fixed value of 0x37 and
* for now only accept this single value.
*/
if (ver->hw_platform != 0x37) {
BT_ERR("%s: Unsupported Intel hardware platform (%u)",
hdev->name, ver->hw_platform);
kfree_skb(skb);
return -EINVAL;
}
/* At the moment only the hardware variant iBT 3.0 (LnP/SfP) is
* supported by this firmware loading method. This check has been
* put in place to ensure correct forward compatibility options
* when newer hardware variants come along.
*/
if (ver->hw_variant != 0x0b) {
BT_ERR("%s: Unsupported Intel hardware variant (%u)",
hdev->name, ver->hw_variant);
kfree_skb(skb);
return -EINVAL;
}
btusb_intel_version_info(hdev, ver);
/* The firmware variant determines if the device is in bootloader
* mode or is running operational firmware. The value 0x06 identifies
* the bootloader and the value 0x23 identifies the operational
* firmware.
*
* When the operational firmware is already present, then only
* the check for valid Bluetooth device address is needed. This
* determines if the device will be added as configured or
* unconfigured controller.
*
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode.
*/
if (ver->fw_variant == 0x23) {
kfree_skb(skb);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
btusb_check_bdaddr_intel(hdev);
return 0;
}
/* If the device is not in bootloader mode, then the only possible
* choice is to return an error and abort the device initialization.
*/
if (ver->fw_variant != 0x06) {
BT_ERR("%s: Unsupported Intel firmware variant (%u)",
hdev->name, ver->fw_variant);
kfree_skb(skb);
return -ENODEV;
}
kfree_skb(skb);
/* Read the secure boot parameters to identify the operating
* details of the bootloader.
*/
skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reading Intel boot parameters failed (%ld)",
hdev->name, PTR_ERR(skb));
return PTR_ERR(skb);
}
if (skb->len != sizeof(*params)) {
BT_ERR("%s: Intel boot parameters size mismatch", hdev->name);
kfree_skb(skb);
return -EILSEQ;
}
params = (struct intel_boot_params *)skb->data;
if (params->status) {
BT_ERR("%s: Intel boot parameters command failure (%02x)",
hdev->name, params->status);
err = -bt_to_errno(params->status);
kfree_skb(skb);
return err;
}
BT_INFO("%s: Device revision is %u", hdev->name,
le16_to_cpu(params->dev_revid));
BT_INFO("%s: Secure boot is %s", hdev->name,
params->secure_boot ? "enabled" : "disabled");
BT_INFO("%s: Minimum firmware build %u week %u %u", hdev->name,
params->min_fw_build_nn, params->min_fw_build_cw,
2000 + params->min_fw_build_yy);
/* It is required that every single firmware fragment is acknowledged
* with a command complete event. If the boot parameters indicate
* that this bootloader does not send them, then abort the setup.
*/
if (params->limited_cce != 0x00) {
BT_ERR("%s: Unsupported Intel firmware loading method (%u)",
hdev->name, params->limited_cce);
kfree_skb(skb);
return -EINVAL;
}
/* If the OTP has no valid Bluetooth device address, then there will
* also be no valid address for the operational firmware.
*/
if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
BT_INFO("%s: No device address configured", hdev->name);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
/* With this Intel bootloader only the hardware variant and device
* revision information are used to select the right firmware.
*
* Currently this bootloader support is limited to hardware variant
* iBT 3.0 (LnP/SfP) which is identified by the value 11 (0x0b).
*/
snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.sfi",
le16_to_cpu(params->dev_revid));
err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
BT_ERR("%s: Failed to load Intel firmware file (%d)",
hdev->name, err);
kfree_skb(skb);
return err;
}
BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
kfree_skb(skb);
if (fw->size < 644) {
BT_ERR("%s: Invalid size of firmware file (%zu)",
hdev->name, fw->size);
err = -EBADF;
goto done;
}
set_bit(BTUSB_DOWNLOADING, &data->flags);
/* Start the firmware download transaction with the Init fragment
* represented by the 128 bytes of CSS header.
*/
err = btusb_intel_secure_send(hdev, 0x00, 128, fw->data);
if (err < 0) {
BT_ERR("%s: Failed to send firmware header (%d)",
hdev->name, err);
goto done;
}
/* Send the 256 bytes of public key information from the firmware
* as the PKey fragment.
*/
err = btusb_intel_secure_send(hdev, 0x03, 256, fw->data + 128);
if (err < 0) {
BT_ERR("%s: Failed to send firmware public key (%d)",
hdev->name, err);
goto done;
}
/* Send the 256 bytes of signature information from the firmware
* as the Sign fragment.
*/
err = btusb_intel_secure_send(hdev, 0x02, 256, fw->data + 388);
if (err < 0) {
BT_ERR("%s: Failed to send firmware signature (%d)",
hdev->name, err);
goto done;
}
fw_ptr = fw->data + 644;
while (fw_ptr - fw->data < fw->size) {
struct hci_command_hdr *cmd = (void *)fw_ptr;
u8 cmd_len;
cmd_len = sizeof(*cmd) + cmd->plen;
/* Send each command from the firmware data buffer as
* a single Data fragment.
*/
err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
if (err < 0) {
BT_ERR("%s: Failed to send firmware data (%d)",
hdev->name, err);
goto done;
}
fw_ptr += cmd_len;
}
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
BT_INFO("%s: Waiting for firmware download to complete", hdev->name);
/* Before switching the device into operational mode and with that
* booting the loaded firmware, wait for the bootloader notification
* that all fragments have been successfully received.
*
* When the event processing receives the notification, then the
* BTUSB_DOWNLOADING flag will be cleared.
*
* The firmware loading should not take longer than 5 seconds
* and thus just timeout if that happens and fail the setup
* of this device.
*/
err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
msecs_to_jiffies(5000),
TASK_INTERRUPTIBLE);
if (err == 1) {
BT_ERR("%s: Firmware loading interrupted", hdev->name);
err = -EINTR;
goto done;
}
if (err) {
BT_ERR("%s: Firmware loading timeout", hdev->name);
err = -ETIMEDOUT;
goto done;
}
if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) {
BT_ERR("%s: Firmware loading failed", hdev->name);
err = -ENOEXEC;
goto done;
}
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
BT_INFO("%s: Firmware loaded in %llu usecs", hdev->name, duration);
done:
release_firmware(fw);
if (err < 0)
return err;
calltime = ktime_get();
set_bit(BTUSB_BOOTING, &data->flags);
skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
kfree_skb(skb);
/* The bootloader will not indicate when the device is ready. This
* is done by the operational firmware sending bootup notification.
*
* Booting into operational firmware should not take longer than
* 1 second. However if that happens, then just fail the setup
* since something went wrong.
*/
BT_INFO("%s: Waiting for device to boot", hdev->name);
err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
msecs_to_jiffies(1000),
TASK_INTERRUPTIBLE);
if (err == 1) {
BT_ERR("%s: Device boot interrupted", hdev->name);
return -EINTR;
}
if (err) {
BT_ERR("%s: Device boot timeout", hdev->name);
return -ETIMEDOUT;
}
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
BT_INFO("%s: Device booted in %llu usecs", hdev->name, duration);
clear_bit(BTUSB_BOOTLOADER, &data->flags);
return 0;
}
static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
{
struct sk_buff *skb;
u8 type = 0x00;
BT_ERR("%s: Hardware error 0x%2.2x", hdev->name, code);
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Reset after hardware error failed (%ld)",
hdev->name, PTR_ERR(skb));
return;
}
kfree_skb(skb);
skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
BT_ERR("%s: Retrieving Intel exception info failed (%ld)",
hdev->name, PTR_ERR(skb));
return;
}
if (skb->len != 13) {
BT_ERR("%s: Exception info size mismatch", hdev->name);
kfree_skb(skb);
return;
}
if (skb->data[0] != 0x00) {
BT_ERR("%s: Exception info command failure (%02x)",
hdev->name, skb->data[0]);
kfree_skb(skb);
return;
}
BT_ERR("%s: Exception info %s", hdev->name, (char *)(skb->data + 1));
kfree_skb(skb);
}
static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
long ret;
skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: changing Intel device address failed (%ld)",
hdev->name, ret);
return ret;
}
kfree_skb(skb);
return 0;
}
static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
u8 buf[8];
long ret;
buf[0] = 0xfe;
buf[1] = sizeof(bdaddr_t);
memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: changing Marvell device address failed (%ld)",
hdev->name, ret);
return ret;
}
kfree_skb(skb);
return 0;
}
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_device *udev = data->udev;
char fw_name[64];
const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
const struct hci_command_hdr *cmd;
const u8 *cmd_param;
u16 opcode;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
struct hci_rp_read_bd_addr *bda;
long ret;
snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
udev->product ? udev->product : "BCM",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
ret = request_firmware(&fw, fw_name, &hdev->dev);
if (ret < 0) {
BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
return 0;
}
/* Reset */
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
goto done;
}
kfree_skb(skb);
/* Read Local Version Info */
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
hdev->name, ret);
goto done;
}
if (skb->len != sizeof(*ver)) {
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
hdev->name);
kfree_skb(skb);
ret = -EIO;
goto done;
}
ver = (struct hci_rp_read_local_version *)skb->data;
BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
ver->lmp_ver, ver->lmp_subver);
kfree_skb(skb);
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: Download Minidrv command failed (%ld)",
hdev->name, ret);
goto reset_fw;
}
kfree_skb(skb);
/* 50 msec delay after Download Minidrv completes */
msleep(50);
fw_ptr = fw->data;
fw_size = fw->size;
while (fw_size >= sizeof(*cmd)) {
cmd = (struct hci_command_hdr *)fw_ptr;
fw_ptr += sizeof(*cmd);
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
BT_ERR("%s: BCM: patch %s is corrupted",
hdev->name, fw_name);
ret = -EINVAL;
goto reset_fw;
}
cmd_param = fw_ptr;
fw_ptr += cmd->plen;
fw_size -= cmd->plen;
opcode = le16_to_cpu(cmd->opcode);
skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: patch command %04x failed (%ld)",
hdev->name, opcode, ret);
goto reset_fw;
}
kfree_skb(skb);
}
/* 250 msec delay after Launch Ram completes */
msleep(250);
reset_fw:
/* Reset */
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
goto done;
}
kfree_skb(skb);
/* Read Local Version Info */
skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
hdev->name, ret);
goto done;
}
if (skb->len != sizeof(*ver)) {
BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
hdev->name);
kfree_skb(skb);
ret = -EIO;
goto done;
}
ver = (struct hci_rp_read_local_version *)skb->data;
BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
ver->lmp_ver, ver->lmp_subver);
kfree_skb(skb);
/* Read BD Address */
skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
hdev->name, ret);
goto done;
}
if (skb->len != sizeof(*bda)) {
BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
hdev->name);
kfree_skb(skb);
ret = -EIO;
goto done;
}
bda = (struct hci_rp_read_bd_addr *)skb->data;
if (bda->status) {
BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
hdev->name, bda->status);
kfree_skb(skb);
ret = -bt_to_errno(bda->status);
goto done;
}
/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
* with no configured address.
*/
if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
BT_INFO("%s: BCM: using default device address (%pMR)",
hdev->name, &bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
}
kfree_skb(skb);
done:
release_firmware(fw);
return ret;
}
static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
long ret;
skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: BCM: Change address command failed (%ld)",
hdev->name, ret);
return ret;
}
kfree_skb(skb);
return 0;
}
static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
const bdaddr_t *bdaddr)
{
struct sk_buff *skb;
u8 buf[10];
long ret;
buf[0] = 0x01;
buf[1] = 0x01;
buf[2] = 0x00;
buf[3] = sizeof(bdaddr_t);
memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
if (IS_ERR(skb)) {
ret = PTR_ERR(skb);
BT_ERR("%s: Change address command failed (%ld)",
hdev->name, ret);
return ret;
}
kfree_skb(skb);
return 0;
}
static int btusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_endpoint_descriptor *ep_desc;
struct btusb_data *data;
struct hci_dev *hdev;
int i, err;
BT_DBG("intf %p id %p", intf, id);
/* interface numbers are hardcoded in the spec */
if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
return -ENODEV;
if (!id->driver_info) {
const struct usb_device_id *match;
match = usb_match_id(intf, blacklist_table);
if (match)
id = match;
}
if (id->driver_info == BTUSB_IGNORE)
return -ENODEV;
if (id->driver_info & BTUSB_ATH3012) {
struct usb_device *udev = interface_to_usbdev(intf);
/* Old firmware would otherwise let ath3k driver load
* patch and sysconfig files */
if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
return -ENODEV;
}
data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
if (!data->intr_ep && usb_endpoint_is_int_in(ep_desc)) {
data->intr_ep = ep_desc;
continue;
}
if (!data->bulk_tx_ep && usb_endpoint_is_bulk_out(ep_desc)) {
data->bulk_tx_ep = ep_desc;
continue;
}
if (!data->bulk_rx_ep && usb_endpoint_is_bulk_in(ep_desc)) {
data->bulk_rx_ep = ep_desc;
continue;
}
}
if (!data->intr_ep || !data->bulk_tx_ep || !data->bulk_rx_ep)
return -ENODEV;
if (id->driver_info & BTUSB_AMP) {
data->cmdreq_type = USB_TYPE_CLASS | 0x01;
data->cmdreq = 0x2b;
} else {
data->cmdreq_type = USB_TYPE_CLASS;
data->cmdreq = 0x00;
}
data->udev = interface_to_usbdev(intf);
data->intf = intf;
INIT_WORK(&data->work, btusb_work);
INIT_WORK(&data->waker, btusb_waker);
init_usb_anchor(&data->deferred);
init_usb_anchor(&data->tx_anchor);
spin_lock_init(&data->txlock);
init_usb_anchor(&data->intr_anchor);
init_usb_anchor(&data->bulk_anchor);
init_usb_anchor(&data->isoc_anchor);
spin_lock_init(&data->rxlock);
if (id->driver_info & BTUSB_INTEL_NEW) {
data->recv_event = btusb_recv_event_intel;
data->recv_bulk = btusb_recv_bulk_intel;
set_bit(BTUSB_BOOTLOADER, &data->flags);
} else {
data->recv_event = hci_recv_frame;
data->recv_bulk = btusb_recv_bulk;
}
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
hdev->bus = HCI_USB;
hci_set_drvdata(hdev, data);
if (id->driver_info & BTUSB_AMP)
hdev->dev_type = HCI_AMP;
else
hdev->dev_type = HCI_BREDR;
data->hdev = hdev;
SET_HCIDEV_DEV(hdev, &intf->dev);
hdev->open = btusb_open;
hdev->close = btusb_close;
hdev->flush = btusb_flush;
hdev->send = btusb_send_frame;
hdev->notify = btusb_notify;
if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035;
if (id->driver_info & BTUSB_BCM_PATCHRAM) {
hdev->setup = btusb_setup_bcm_patchram;
hdev->set_bdaddr = btusb_set_bdaddr_bcm;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL) {
hdev->setup = btusb_setup_intel;
hdev->set_bdaddr = btusb_set_bdaddr_intel;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_NEW) {
hdev->send = btusb_send_frame_intel;
hdev->setup = btusb_setup_intel_new;
hdev->hw_error = btusb_hw_error_intel;
hdev->set_bdaddr = btusb_set_bdaddr_intel;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
if (id->driver_info & BTUSB_MARVELL)
hdev->set_bdaddr = btusb_set_bdaddr_marvell;
if (id->driver_info & BTUSB_SWAVE) {
set_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_BOOT)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
if (id->driver_info & BTUSB_ATH3012) {
hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
}
if (id->driver_info & BTUSB_AMP) {
/* AMP controllers do not support SCO packets */
data->isoc = NULL;
} else {
/* Interface numbers are hardcoded in the specification */
data->isoc = usb_ifnum_to_if(data->udev, 1);
}
if (!reset)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
if (!disable_scofix)
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
}
if (id->driver_info & BTUSB_BROKEN_ISOC)
data->isoc = NULL;
if (id->driver_info & BTUSB_DIGIANSWER) {
data->cmdreq_type = USB_TYPE_VENDOR;
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_CSR) {
struct usb_device *udev = data->udev;
u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
/* Old firmware would otherwise execute USB reset */
if (bcdDevice < 0x117)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* Fake CSR devices with broken commands */
if (bcdDevice <= 0x100)
hdev->setup = btusb_setup_csr;
}
if (id->driver_info & BTUSB_SNIFFER) {
struct usb_device *udev = data->udev;
/* New sniffer firmware has crippled HCI interface */
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
}
if (id->driver_info & BTUSB_INTEL_BOOT) {
/* A bug in the bootloader causes that interrupt interface is
* only enabled after receiving SetInterface(0, AltSetting=0).
*/
err = usb_set_interface(data->udev, 0, 0);
if (err < 0) {
BT_ERR("failed to set interface 0, alt 0 %d", err);
hci_free_dev(hdev);
return err;
}
}
if (data->isoc) {
err = usb_driver_claim_interface(&btusb_driver,
data->isoc, data);
if (err < 0) {
hci_free_dev(hdev);
return err;
}
}
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);
return err;
}
usb_set_intfdata(intf, data);
return 0;
}
static void btusb_disconnect(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev;
BT_DBG("intf %p", intf);
if (!data)
return;
hdev = data->hdev;
usb_set_intfdata(data->intf, NULL);
if (data->isoc)
usb_set_intfdata(data->isoc, NULL);
hci_unregister_dev(hdev);
if (intf == data->isoc)
usb_driver_release_interface(&btusb_driver, data->intf);
else if (data->isoc)
usb_driver_release_interface(&btusb_driver, data->isoc);
hci_free_dev(hdev);
}
#ifdef CONFIG_PM
static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
{
struct btusb_data *data = usb_get_intfdata(intf);
BT_DBG("intf %p", intf);
if (data->suspend_count++)
return 0;
spin_lock_irq(&data->txlock);
if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
set_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
} else {
spin_unlock_irq(&data->txlock);
data->suspend_count--;
return -EBUSY;
}
cancel_work_sync(&data->work);
btusb_stop_traffic(data);
usb_kill_anchored_urbs(&data->tx_anchor);
return 0;
}
static void play_deferred(struct btusb_data *data)
{
struct urb *urb;
int err;
while ((urb = usb_get_from_anchor(&data->deferred))) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0)
break;
data->tx_in_flight++;
}
usb_scuttle_anchored_urbs(&data->deferred);
}
static int btusb_resume(struct usb_interface *intf)
{
struct btusb_data *data = usb_get_intfdata(intf);
struct hci_dev *hdev = data->hdev;
int err = 0;
BT_DBG("intf %p", intf);
if (--data->suspend_count)
return 0;
if (!test_bit(HCI_RUNNING, &hdev->flags))
goto done;
if (test_bit(BTUSB_INTR_RUNNING, &data->flags)) {
err = btusb_submit_intr_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_INTR_RUNNING, &data->flags);
goto failed;
}
}
if (test_bit(BTUSB_BULK_RUNNING, &data->flags)) {
err = btusb_submit_bulk_urb(hdev, GFP_NOIO);
if (err < 0) {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
goto failed;
}
btusb_submit_bulk_urb(hdev, GFP_NOIO);
}
if (test_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
if (btusb_submit_isoc_urb(hdev, GFP_NOIO) < 0)
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
else
btusb_submit_isoc_urb(hdev, GFP_NOIO);
}
spin_lock_irq(&data->txlock);
play_deferred(data);
clear_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
schedule_work(&data->work);
return 0;
failed:
usb_scuttle_anchored_urbs(&data->deferred);
done:
spin_lock_irq(&data->txlock);
clear_bit(BTUSB_SUSPENDING, &data->flags);
spin_unlock_irq(&data->txlock);
return err;
}
#endif
static struct usb_driver btusb_driver = {
.name = "btusb",
.probe = btusb_probe,
.disconnect = btusb_disconnect,
#ifdef CONFIG_PM
.suspend = btusb_suspend,
.resume = btusb_resume,
#endif
.id_table = btusb_table,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
module_usb_driver(btusb_driver);
module_param(disable_scofix, bool, 0644);
MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
module_param(force_scofix, bool, 0644);
MODULE_PARM_DESC(force_scofix, "Force fixup of wrong SCO buffers size");
module_param(reset, bool, 0644);
MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Generic Bluetooth USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");