blob: 77b7122c8fdb66d8bad1b4a4f39524bec0423617 [file] [log] [blame]
/*********************************************************************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2007 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
*********************************************************************/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/string.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <net/dst.h>
#ifdef CONFIG_XFRM
#include <linux/xfrm.h>
#include <net/xfrm.h>
#endif /* CONFIG_XFRM */
#include <asm/atomic.h>
#include <asm/octeon/octeon.h>
#include "ethernet-defines.h"
#include "octeon-ethernet.h"
#include "ethernet-util.h"
#include "cvmx-wqe.h"
#include "cvmx-fau.h"
#include "cvmx-pko.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
/*
* You can define GET_SKBUFF_QOS() to override how the skbuff output
* function determines which output queue is used. The default
* implementation always uses the base queue for the port. If, for
* example, you wanted to use the skb->priority fieid, define
* GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)
*/
#ifndef GET_SKBUFF_QOS
#define GET_SKBUFF_QOS(skb) 0
#endif
/**
* Packet transmit
*
* @skb: Packet to send
* @dev: Device info structure
* Returns Always returns zero
*/
int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
{
cvmx_pko_command_word0_t pko_command;
union cvmx_buf_ptr hw_buffer;
uint64_t old_scratch;
uint64_t old_scratch2;
int dropped;
int qos;
struct octeon_ethernet *priv = netdev_priv(dev);
int32_t in_use;
int32_t buffers_to_free;
#if REUSE_SKBUFFS_WITHOUT_FREE
unsigned char *fpa_head;
#endif
/*
* Prefetch the private data structure. It is larger that one
* cache line.
*/
prefetch(priv);
/* Start off assuming no drop */
dropped = 0;
/*
* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
* completely remove "qos" in the event neither interface
* supports multiple queues per port.
*/
if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
(CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
qos = GET_SKBUFF_QOS(skb);
if (qos <= 0)
qos = 0;
else if (qos >= cvmx_pko_get_num_queues(priv->port))
qos = 0;
} else
qos = 0;
if (USE_ASYNC_IOBDMA) {
/* Save scratch in case userspace is using it */
CVMX_SYNCIOBDMA;
old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
/*
* Assume we're going to be able t osend this
* packet. Fetch and increment the number of pending
* packets for output.
*/
cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,
FAU_NUM_PACKET_BUFFERS_TO_FREE,
0);
cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
priv->fau + qos * 4, 1);
}
/*
* The CN3XXX series of parts has an errata (GMX-401) which
* causes the GMX block to hang if a collision occurs towards
* the end of a <68 byte packet. As a workaround for this, we
* pad packets to be 68 bytes whenever we are in half duplex
* mode. We don't handle the case of having a small packet but
* no room to add the padding. The kernel should always give
* us at least a cache line
*/
if ((skb->len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
union cvmx_gmxx_prtx_cfg gmx_prt_cfg;
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
if (interface < 2) {
/* We only need to pad packet in half duplex mode */
gmx_prt_cfg.u64 =
cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
if (gmx_prt_cfg.s.duplex == 0) {
int add_bytes = 64 - skb->len;
if ((skb_tail_pointer(skb) + add_bytes) <=
skb_end_pointer(skb))
memset(__skb_put(skb, add_bytes), 0,
add_bytes);
}
}
}
/* Build the PKO buffer pointer */
hw_buffer.u64 = 0;
hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data);
hw_buffer.s.pool = 0;
hw_buffer.s.size =
(unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head;
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
pko_command.s.segs = 1;
pko_command.s.total_bytes = skb->len;
pko_command.s.size0 = CVMX_FAU_OP_SIZE_32;
pko_command.s.subone0 = 1;
pko_command.s.dontfree = 1;
pko_command.s.reg0 = priv->fau + qos * 4;
/*
* See if we can put this skb in the FPA pool. Any strange
* behavior from the Linux networking stack will most likely
* be caused by a bug in the following code. If some field is
* in use by the network stack and get carried over when a
* buffer is reused, bad thing may happen. If in doubt and
* you dont need the absolute best performance, disable the
* define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has
* shown a 25% increase in performance under some loads.
*/
#if REUSE_SKBUFFS_WITHOUT_FREE
fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f);
if (unlikely(skb->data < fpa_head)) {
/*
* printk("TX buffer beginning can't meet FPA
* alignment constraints\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely
((skb_end_pointer(skb) - fpa_head) < CVMX_FPA_PACKET_POOL_SIZE)) {
/*
printk("TX buffer isn't large enough for the FPA\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely(skb_shared(skb))) {
/*
printk("TX buffer sharing data with someone else\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely(skb_cloned(skb))) {
/*
printk("TX buffer has been cloned\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely(skb_header_cloned(skb))) {
/*
printk("TX buffer header has been cloned\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely(skb->destructor)) {
/*
printk("TX buffer has a destructor\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely(skb_shinfo(skb)->nr_frags)) {
/*
printk("TX buffer has fragments\n");
*/
goto dont_put_skbuff_in_hw;
}
if (unlikely
(skb->truesize !=
sizeof(*skb) + skb_end_pointer(skb) - skb->head)) {
/*
printk("TX buffer truesize has been changed\n");
*/
goto dont_put_skbuff_in_hw;
}
/*
* We can use this buffer in the FPA. We don't need the FAU
* update anymore
*/
pko_command.s.reg0 = 0;
pko_command.s.dontfree = 0;
hw_buffer.s.back = (skb->data - fpa_head) >> 7;
*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
/*
* The skbuff will be reused without ever being freed. We must
* cleanup a bunch of Linux stuff.
*/
dst_release(skb->dst);
skb->dst = NULL;
#ifdef CONFIG_XFRM
secpath_put(skb->sp);
skb->sp = NULL;
#endif
nf_reset(skb);
#ifdef CONFIG_NET_SCHED
skb->tc_index = 0;
#ifdef CONFIG_NET_CLS_ACT
skb->tc_verd = 0;
#endif /* CONFIG_NET_CLS_ACT */
#endif /* CONFIG_NET_SCHED */
dont_put_skbuff_in_hw:
#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
/* Check if we can use the hardware checksumming */
if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) &&
(ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) &&
((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14))
&& ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
|| (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) {
/* Use hardware checksum calc */
pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
}
if (USE_ASYNC_IOBDMA) {
/* Get the number of skbuffs in use by the hardware */
CVMX_SYNCIOBDMA;
in_use = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
} else {
/* Get the number of skbuffs in use by the hardware */
in_use = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, 1);
buffers_to_free =
cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
}
/*
* If we're sending faster than the receive can free them then
* don't do the HW free.
*/
if ((buffers_to_free < -100) && !pko_command.s.dontfree) {
pko_command.s.dontfree = 1;
pko_command.s.reg0 = priv->fau + qos * 4;
}
cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
CVMX_PKO_LOCK_CMD_QUEUE);
/* Drop this packet if we have too many already queued to the HW */
if (unlikely
(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
/*
DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name);
*/
dropped = 1;
}
/* Send the packet to the output queue */
else if (unlikely
(cvmx_pko_send_packet_finish
(priv->port, priv->queue + qos, pko_command, hw_buffer,
CVMX_PKO_LOCK_CMD_QUEUE))) {
DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
dropped = 1;
}
if (USE_ASYNC_IOBDMA) {
/* Restore the scratch area */
cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
}
if (unlikely(dropped)) {
dev_kfree_skb_any(skb);
cvmx_fau_atomic_add32(priv->fau + qos * 4, -1);
priv->stats.tx_dropped++;
} else {
if (USE_SKBUFFS_IN_HW) {
/* Put this packet on the queue to be freed later */
if (pko_command.s.dontfree)
skb_queue_tail(&priv->tx_free_list[qos], skb);
else {
cvmx_fau_atomic_add32
(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
cvmx_fau_atomic_add32(priv->fau + qos * 4, -1);
}
} else {
/* Put this packet on the queue to be freed later */
skb_queue_tail(&priv->tx_free_list[qos], skb);
}
}
/* Free skbuffs not in use by the hardware, possibly two at a time */
if (skb_queue_len(&priv->tx_free_list[qos]) > in_use) {
spin_lock(&priv->tx_free_list[qos].lock);
/*
* Check again now that we have the lock. It might
* have changed.
*/
if (skb_queue_len(&priv->tx_free_list[qos]) > in_use)
dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
if (skb_queue_len(&priv->tx_free_list[qos]) > in_use)
dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
spin_unlock(&priv->tx_free_list[qos].lock);
}
return 0;
}
/**
* Packet transmit to the POW
*
* @skb: Packet to send
* @dev: Device info structure
* Returns Always returns zero
*/
int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
void *packet_buffer;
void *copy_location;
/* Get a work queue entry */
cvmx_wqe_t *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);
if (unlikely(work == NULL)) {
DEBUGPRINT("%s: Failed to allocate a work queue entry\n",
dev->name);
priv->stats.tx_dropped++;
dev_kfree_skb(skb);
return 0;
}
/* Get a packet buffer */
packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
if (unlikely(packet_buffer == NULL)) {
DEBUGPRINT("%s: Failed to allocate a packet buffer\n",
dev->name);
cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
priv->stats.tx_dropped++;
dev_kfree_skb(skb);
return 0;
}
/*
* Calculate where we need to copy the data to. We need to
* leave 8 bytes for a next pointer (unused). We also need to
* include any configure skip. Then we need to align the IP
* packet src and dest into the same 64bit word. The below
* calculation may add a little extra, but that doesn't
* hurt.
*/
copy_location = packet_buffer + sizeof(uint64_t);
copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6;
/*
* We have to copy the packet since whoever processes this
* packet will free it to a hardware pool. We can't use the
* trick of counting outstanding packets like in
* cvm_oct_xmit.
*/
memcpy(copy_location, skb->data, skb->len);
/*
* Fill in some of the work queue fields. We may need to add
* more if the software at the other end needs them.
*/
work->hw_chksum = skb->csum;
work->len = skb->len;
work->ipprt = priv->port;
work->qos = priv->port & 0x7;
work->grp = pow_send_group;
work->tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
work->tag = pow_send_group; /* FIXME */
/* Default to zero. Sets of zero later are commented out */
work->word2.u64 = 0;
work->word2.s.bufs = 1;
work->packet_ptr.u64 = 0;
work->packet_ptr.s.addr = cvmx_ptr_to_phys(copy_location);
work->packet_ptr.s.pool = CVMX_FPA_PACKET_POOL;
work->packet_ptr.s.size = CVMX_FPA_PACKET_POOL_SIZE;
work->packet_ptr.s.back = (copy_location - packet_buffer) >> 7;
if (skb->protocol == htons(ETH_P_IP)) {
work->word2.s.ip_offset = 14;
#if 0
work->word2.s.vlan_valid = 0; /* FIXME */
work->word2.s.vlan_cfi = 0; /* FIXME */
work->word2.s.vlan_id = 0; /* FIXME */
work->word2.s.dec_ipcomp = 0; /* FIXME */
#endif
work->word2.s.tcp_or_udp =
(ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
|| (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP);
#if 0
/* FIXME */
work->word2.s.dec_ipsec = 0;
/* We only support IPv4 right now */
work->word2.s.is_v6 = 0;
/* Hardware would set to zero */
work->word2.s.software = 0;
/* No error, packet is internal */
work->word2.s.L4_error = 0;
#endif
work->word2.s.is_frag = !((ip_hdr(skb)->frag_off == 0)
|| (ip_hdr(skb)->frag_off ==
1 << 14));
#if 0
/* Assume Linux is sending a good packet */
work->word2.s.IP_exc = 0;
#endif
work->word2.s.is_bcast = (skb->pkt_type == PACKET_BROADCAST);
work->word2.s.is_mcast = (skb->pkt_type == PACKET_MULTICAST);
#if 0
/* This is an IP packet */
work->word2.s.not_IP = 0;
/* No error, packet is internal */
work->word2.s.rcv_error = 0;
/* No error, packet is internal */
work->word2.s.err_code = 0;
#endif
/*
* When copying the data, include 4 bytes of the
* ethernet header to align the same way hardware
* does.
*/
memcpy(work->packet_data, skb->data + 10,
sizeof(work->packet_data));
} else {
#if 0
work->word2.snoip.vlan_valid = 0; /* FIXME */
work->word2.snoip.vlan_cfi = 0; /* FIXME */
work->word2.snoip.vlan_id = 0; /* FIXME */
work->word2.snoip.software = 0; /* Hardware would set to zero */
#endif
work->word2.snoip.is_rarp = skb->protocol == htons(ETH_P_RARP);
work->word2.snoip.is_arp = skb->protocol == htons(ETH_P_ARP);
work->word2.snoip.is_bcast =
(skb->pkt_type == PACKET_BROADCAST);
work->word2.snoip.is_mcast =
(skb->pkt_type == PACKET_MULTICAST);
work->word2.snoip.not_IP = 1; /* IP was done up above */
#if 0
/* No error, packet is internal */
work->word2.snoip.rcv_error = 0;
/* No error, packet is internal */
work->word2.snoip.err_code = 0;
#endif
memcpy(work->packet_data, skb->data, sizeof(work->packet_data));
}
/* Submit the packet to the POW */
cvmx_pow_work_submit(work, work->tag, work->tag_type, work->qos,
work->grp);
priv->stats.tx_packets++;
priv->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
return 0;
}
/**
* Transmit a work queue entry out of the ethernet port. Both
* the work queue entry and the packet data can optionally be
* freed. The work will be freed on error as well.
*
* @dev: Device to transmit out.
* @work_queue_entry:
* Work queue entry to send
* @do_free: True if the work queue entry and packet data should be
* freed. If false, neither will be freed.
* @qos: Index into the queues for this port to transmit on. This
* is used to implement QoS if their are multiple queues per
* port. This parameter must be between 0 and the number of
* queues per port minus 1. Values outside of this range will
* be change to zero.
*
* Returns Zero on success, negative on failure.
*/
int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
int do_free, int qos)
{
unsigned long flags;
union cvmx_buf_ptr hw_buffer;
cvmx_pko_command_word0_t pko_command;
int dropped;
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_wqe_t *work = work_queue_entry;
if (!(dev->flags & IFF_UP)) {
DEBUGPRINT("%s: Device not up\n", dev->name);
if (do_free)
cvm_oct_free_work(work);
return -1;
}
/* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely
remove "qos" in the event neither interface supports
multiple queues per port */
if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
(CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
if (qos <= 0)
qos = 0;
else if (qos >= cvmx_pko_get_num_queues(priv->port))
qos = 0;
} else
qos = 0;
/* Start off assuming no drop */
dropped = 0;
local_irq_save(flags);
cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
CVMX_PKO_LOCK_CMD_QUEUE);
/* Build the PKO buffer pointer */
hw_buffer.u64 = 0;
hw_buffer.s.addr = work->packet_ptr.s.addr;
hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE;
hw_buffer.s.back = work->packet_ptr.s.back;
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
pko_command.s.dontfree = !do_free;
pko_command.s.segs = work->word2.s.bufs;
pko_command.s.total_bytes = work->len;
/* Check if we can use the hardware checksumming */
if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc))
pko_command.s.ipoffp1 = 0;
else
pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
/* Send the packet to the output queue */
if (unlikely
(cvmx_pko_send_packet_finish
(priv->port, priv->queue + qos, pko_command, hw_buffer,
CVMX_PKO_LOCK_CMD_QUEUE))) {
DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
dropped = -1;
}
local_irq_restore(flags);
if (unlikely(dropped)) {
if (do_free)
cvm_oct_free_work(work);
priv->stats.tx_dropped++;
} else if (do_free)
cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
return dropped;
}
EXPORT_SYMBOL(cvm_oct_transmit_qos);
/**
* This function frees all skb that are currenty queued for TX.
*
* @dev: Device being shutdown
*/
void cvm_oct_tx_shutdown(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
unsigned long flags;
int qos;
for (qos = 0; qos < 16; qos++) {
spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
while (skb_queue_len(&priv->tx_free_list[qos]))
dev_kfree_skb_any(__skb_dequeue
(&priv->tx_free_list[qos]));
spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
}
}