| /* |
| * Copyright (C) 2002 Motorola GSG-China |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, |
| * USA. |
| * |
| * Author: |
| * Darius Augulis, Teltonika Inc. |
| * |
| * Desc.: |
| * Implementation of I2C Adapter/Algorithm Driver |
| * for I2C Bus integrated in Freescale i.MX/MXC processors |
| * |
| * Derived from Motorola GSG China I2C example driver |
| * |
| * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de |
| * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de |
| * Copyright (C) 2007 RightHand Technologies, Inc. |
| * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt> |
| * |
| */ |
| |
| /** Includes ******************************************************************* |
| *******************************************************************************/ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/io.h> |
| #include <linux/sched.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| |
| #include <mach/irqs.h> |
| #include <mach/hardware.h> |
| #include <mach/i2c.h> |
| |
| /** Defines ******************************************************************** |
| *******************************************************************************/ |
| |
| /* This will be the driver name the kernel reports */ |
| #define DRIVER_NAME "imx-i2c" |
| |
| /* Default value */ |
| #define IMX_I2C_BIT_RATE 100000 /* 100kHz */ |
| |
| /* IMX I2C registers */ |
| #define IMX_I2C_IADR 0x00 /* i2c slave address */ |
| #define IMX_I2C_IFDR 0x04 /* i2c frequency divider */ |
| #define IMX_I2C_I2CR 0x08 /* i2c control */ |
| #define IMX_I2C_I2SR 0x0C /* i2c status */ |
| #define IMX_I2C_I2DR 0x10 /* i2c transfer data */ |
| |
| /* Bits of IMX I2C registers */ |
| #define I2SR_RXAK 0x01 |
| #define I2SR_IIF 0x02 |
| #define I2SR_SRW 0x04 |
| #define I2SR_IAL 0x10 |
| #define I2SR_IBB 0x20 |
| #define I2SR_IAAS 0x40 |
| #define I2SR_ICF 0x80 |
| #define I2CR_RSTA 0x04 |
| #define I2CR_TXAK 0x08 |
| #define I2CR_MTX 0x10 |
| #define I2CR_MSTA 0x20 |
| #define I2CR_IIEN 0x40 |
| #define I2CR_IEN 0x80 |
| |
| /** Variables ****************************************************************** |
| *******************************************************************************/ |
| |
| /* |
| * sorted list of clock divider, register value pairs |
| * taken from table 26-5, p.26-9, Freescale i.MX |
| * Integrated Portable System Processor Reference Manual |
| * Document Number: MC9328MXLRM, Rev. 5.1, 06/2007 |
| * |
| * Duplicated divider values removed from list |
| */ |
| |
| static u16 __initdata i2c_clk_div[50][2] = { |
| { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 }, |
| { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 }, |
| { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 }, |
| { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B }, |
| { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A }, |
| { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 }, |
| { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 }, |
| { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 }, |
| { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 }, |
| { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B }, |
| { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E }, |
| { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D }, |
| { 3072, 0x1E }, { 3840, 0x1F } |
| }; |
| |
| struct imx_i2c_struct { |
| struct i2c_adapter adapter; |
| struct resource *res; |
| struct clk *clk; |
| void __iomem *base; |
| int irq; |
| wait_queue_head_t queue; |
| unsigned long i2csr; |
| unsigned int disable_delay; |
| int stopped; |
| unsigned int ifdr; /* IMX_I2C_IFDR */ |
| }; |
| |
| /** Functions for IMX I2C adapter driver *************************************** |
| *******************************************************************************/ |
| |
| static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) |
| { |
| unsigned long orig_jiffies = jiffies; |
| unsigned int temp; |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); |
| |
| while (1) { |
| temp = readb(i2c_imx->base + IMX_I2C_I2SR); |
| if (for_busy && (temp & I2SR_IBB)) |
| break; |
| if (!for_busy && !(temp & I2SR_IBB)) |
| break; |
| if (signal_pending(current)) { |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> I2C Interrupted\n", __func__); |
| return -EINTR; |
| } |
| if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) { |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> I2C bus is busy\n", __func__); |
| return -ETIMEDOUT; |
| } |
| schedule(); |
| } |
| |
| return 0; |
| } |
| |
| static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx) |
| { |
| wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10); |
| |
| if (unlikely(!(i2c_imx->i2csr & I2SR_IIF))) { |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__); |
| return -ETIMEDOUT; |
| } |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__); |
| i2c_imx->i2csr = 0; |
| return 0; |
| } |
| |
| static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) |
| { |
| if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) { |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__); |
| return -EIO; /* No ACK */ |
| } |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> ACK received\n", __func__); |
| return 0; |
| } |
| |
| static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) |
| { |
| unsigned int temp = 0; |
| int result; |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); |
| |
| clk_enable(i2c_imx->clk); |
| writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); |
| /* Enable I2C controller */ |
| writeb(0, i2c_imx->base + IMX_I2C_I2SR); |
| writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); |
| |
| /* Wait controller to be stable */ |
| udelay(50); |
| |
| /* Start I2C transaction */ |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp |= I2CR_MSTA; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| result = i2c_imx_bus_busy(i2c_imx, 1); |
| if (result) |
| return result; |
| i2c_imx->stopped = 0; |
| |
| temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| return result; |
| } |
| |
| static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) |
| { |
| unsigned int temp = 0; |
| |
| if (!i2c_imx->stopped) { |
| /* Stop I2C transaction */ |
| dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp &= ~(I2CR_MSTA | I2CR_MTX); |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| } |
| if (cpu_is_mx1()) { |
| /* |
| * This delay caused by an i.MXL hardware bug. |
| * If no (or too short) delay, no "STOP" bit will be generated. |
| */ |
| udelay(i2c_imx->disable_delay); |
| } |
| |
| if (!i2c_imx->stopped) { |
| i2c_imx_bus_busy(i2c_imx, 0); |
| i2c_imx->stopped = 1; |
| } |
| |
| /* Disable I2C controller */ |
| writeb(0, i2c_imx->base + IMX_I2C_I2CR); |
| clk_disable(i2c_imx->clk); |
| } |
| |
| static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, |
| unsigned int rate) |
| { |
| unsigned int i2c_clk_rate; |
| unsigned int div; |
| int i; |
| |
| /* Divider value calculation */ |
| i2c_clk_rate = clk_get_rate(i2c_imx->clk); |
| div = (i2c_clk_rate + rate - 1) / rate; |
| if (div < i2c_clk_div[0][0]) |
| i = 0; |
| else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0]) |
| i = ARRAY_SIZE(i2c_clk_div) - 1; |
| else |
| for (i = 0; i2c_clk_div[i][0] < div; i++); |
| |
| /* Store divider value */ |
| i2c_imx->ifdr = i2c_clk_div[i][1]; |
| |
| /* |
| * There dummy delay is calculated. |
| * It should be about one I2C clock period long. |
| * This delay is used in I2C bus disable function |
| * to fix chip hardware bug. |
| */ |
| i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0] |
| + (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2); |
| |
| /* dev_dbg() can't be used, because adapter is not yet registered */ |
| #ifdef CONFIG_I2C_DEBUG_BUS |
| printk(KERN_DEBUG "I2C: <%s> I2C_CLK=%d, REQ DIV=%d\n", |
| __func__, i2c_clk_rate, div); |
| printk(KERN_DEBUG "I2C: <%s> IFDR[IC]=0x%x, REAL DIV=%d\n", |
| __func__, i2c_clk_div[i][1], i2c_clk_div[i][0]); |
| #endif |
| } |
| |
| static irqreturn_t i2c_imx_isr(int irq, void *dev_id) |
| { |
| struct imx_i2c_struct *i2c_imx = dev_id; |
| unsigned int temp; |
| |
| temp = readb(i2c_imx->base + IMX_I2C_I2SR); |
| if (temp & I2SR_IIF) { |
| /* save status register */ |
| i2c_imx->i2csr = temp; |
| temp &= ~I2SR_IIF; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2SR); |
| wake_up(&i2c_imx->queue); |
| return IRQ_HANDLED; |
| } |
| |
| return IRQ_NONE; |
| } |
| |
| static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) |
| { |
| int i, result; |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n", |
| __func__, msgs->addr << 1); |
| |
| /* write slave address */ |
| writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR); |
| result = i2c_imx_trx_complete(i2c_imx); |
| if (result) |
| return result; |
| result = i2c_imx_acked(i2c_imx); |
| if (result) |
| return result; |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> write data\n", __func__); |
| |
| /* write data */ |
| for (i = 0; i < msgs->len; i++) { |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> write byte: B%d=0x%X\n", |
| __func__, i, msgs->buf[i]); |
| writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR); |
| result = i2c_imx_trx_complete(i2c_imx); |
| if (result) |
| return result; |
| result = i2c_imx_acked(i2c_imx); |
| if (result) |
| return result; |
| } |
| return 0; |
| } |
| |
| static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) |
| { |
| int i, result; |
| unsigned int temp; |
| |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> write slave address: addr=0x%x\n", |
| __func__, (msgs->addr << 1) | 0x01); |
| |
| /* write slave address */ |
| writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR); |
| result = i2c_imx_trx_complete(i2c_imx); |
| if (result) |
| return result; |
| result = i2c_imx_acked(i2c_imx); |
| if (result) |
| return result; |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__); |
| |
| /* setup bus to read data */ |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp &= ~I2CR_MTX; |
| if (msgs->len - 1) |
| temp &= ~I2CR_TXAK; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */ |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__); |
| |
| /* read data */ |
| for (i = 0; i < msgs->len; i++) { |
| result = i2c_imx_trx_complete(i2c_imx); |
| if (result) |
| return result; |
| if (i == (msgs->len - 1)) { |
| /* It must generate STOP before read I2DR to prevent |
| controller from generating another clock cycle */ |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> clear MSTA\n", __func__); |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp &= ~(I2CR_MSTA | I2CR_MTX); |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| i2c_imx_bus_busy(i2c_imx, 0); |
| i2c_imx->stopped = 1; |
| } else if (i == (msgs->len - 2)) { |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> set TXAK\n", __func__); |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp |= I2CR_TXAK; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| } |
| msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR); |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> read byte: B%d=0x%X\n", |
| __func__, i, msgs->buf[i]); |
| } |
| return 0; |
| } |
| |
| static int i2c_imx_xfer(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, int num) |
| { |
| unsigned int i, temp; |
| int result; |
| struct imx_i2c_struct *i2c_imx = i2c_get_adapdata(adapter); |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); |
| |
| /* Start I2C transfer */ |
| result = i2c_imx_start(i2c_imx); |
| if (result) |
| goto fail0; |
| |
| /* read/write data */ |
| for (i = 0; i < num; i++) { |
| if (i) { |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> repeated start\n", __func__); |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| temp |= I2CR_RSTA; |
| writeb(temp, i2c_imx->base + IMX_I2C_I2CR); |
| result = i2c_imx_bus_busy(i2c_imx, 1); |
| if (result) |
| goto fail0; |
| } |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> transfer message: %d\n", __func__, i); |
| /* write/read data */ |
| #ifdef CONFIG_I2C_DEBUG_BUS |
| temp = readb(i2c_imx->base + IMX_I2C_I2CR); |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, " |
| "MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__, |
| (temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0), |
| (temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0), |
| (temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0)); |
| temp = readb(i2c_imx->base + IMX_I2C_I2SR); |
| dev_dbg(&i2c_imx->adapter.dev, |
| "<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, " |
| "IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__, |
| (temp & I2SR_ICF ? 1 : 0), (temp & I2SR_IAAS ? 1 : 0), |
| (temp & I2SR_IBB ? 1 : 0), (temp & I2SR_IAL ? 1 : 0), |
| (temp & I2SR_SRW ? 1 : 0), (temp & I2SR_IIF ? 1 : 0), |
| (temp & I2SR_RXAK ? 1 : 0)); |
| #endif |
| if (msgs[i].flags & I2C_M_RD) |
| result = i2c_imx_read(i2c_imx, &msgs[i]); |
| else |
| result = i2c_imx_write(i2c_imx, &msgs[i]); |
| if (result) |
| goto fail0; |
| } |
| |
| fail0: |
| /* Stop I2C transfer */ |
| i2c_imx_stop(i2c_imx); |
| |
| dev_dbg(&i2c_imx->adapter.dev, "<%s> exit with: %s: %d\n", __func__, |
| (result < 0) ? "error" : "success msg", |
| (result < 0) ? result : num); |
| return (result < 0) ? result : num; |
| } |
| |
| static u32 i2c_imx_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm i2c_imx_algo = { |
| .master_xfer = i2c_imx_xfer, |
| .functionality = i2c_imx_func, |
| }; |
| |
| static int __init i2c_imx_probe(struct platform_device *pdev) |
| { |
| struct imx_i2c_struct *i2c_imx; |
| struct resource *res; |
| struct imxi2c_platform_data *pdata; |
| void __iomem *base; |
| resource_size_t res_size; |
| int irq; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "<%s>\n", __func__); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "can't get device resources\n"); |
| return -ENOENT; |
| } |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "can't get irq number\n"); |
| return -ENOENT; |
| } |
| |
| pdata = pdev->dev.platform_data; |
| |
| if (pdata && pdata->init) { |
| ret = pdata->init(&pdev->dev); |
| if (ret) |
| return ret; |
| } |
| |
| res_size = resource_size(res); |
| |
| if (!request_mem_region(res->start, res_size, DRIVER_NAME)) { |
| ret = -EBUSY; |
| goto fail0; |
| } |
| |
| base = ioremap(res->start, res_size); |
| if (!base) { |
| dev_err(&pdev->dev, "ioremap failed\n"); |
| ret = -EIO; |
| goto fail1; |
| } |
| |
| i2c_imx = kzalloc(sizeof(struct imx_i2c_struct), GFP_KERNEL); |
| if (!i2c_imx) { |
| dev_err(&pdev->dev, "can't allocate interface\n"); |
| ret = -ENOMEM; |
| goto fail2; |
| } |
| |
| /* Setup i2c_imx driver structure */ |
| strcpy(i2c_imx->adapter.name, pdev->name); |
| i2c_imx->adapter.owner = THIS_MODULE; |
| i2c_imx->adapter.algo = &i2c_imx_algo; |
| i2c_imx->adapter.dev.parent = &pdev->dev; |
| i2c_imx->adapter.nr = pdev->id; |
| i2c_imx->irq = irq; |
| i2c_imx->base = base; |
| i2c_imx->res = res; |
| |
| /* Get I2C clock */ |
| i2c_imx->clk = clk_get(&pdev->dev, "i2c_clk"); |
| if (IS_ERR(i2c_imx->clk)) { |
| ret = PTR_ERR(i2c_imx->clk); |
| dev_err(&pdev->dev, "can't get I2C clock\n"); |
| goto fail3; |
| } |
| |
| /* Request IRQ */ |
| ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); |
| if (ret) { |
| dev_err(&pdev->dev, "can't claim irq %d\n", i2c_imx->irq); |
| goto fail4; |
| } |
| |
| /* Init queue */ |
| init_waitqueue_head(&i2c_imx->queue); |
| |
| /* Set up adapter data */ |
| i2c_set_adapdata(&i2c_imx->adapter, i2c_imx); |
| |
| /* Set up clock divider */ |
| if (pdata && pdata->bitrate) |
| i2c_imx_set_clk(i2c_imx, pdata->bitrate); |
| else |
| i2c_imx_set_clk(i2c_imx, IMX_I2C_BIT_RATE); |
| |
| /* Set up chip registers to defaults */ |
| writeb(0, i2c_imx->base + IMX_I2C_I2CR); |
| writeb(0, i2c_imx->base + IMX_I2C_I2SR); |
| |
| /* Add I2C adapter */ |
| ret = i2c_add_numbered_adapter(&i2c_imx->adapter); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "registration failed\n"); |
| goto fail5; |
| } |
| |
| /* Set up platform driver data */ |
| platform_set_drvdata(pdev, i2c_imx); |
| |
| dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", i2c_imx->irq); |
| dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n", |
| i2c_imx->res->start, i2c_imx->res->end); |
| dev_dbg(&i2c_imx->adapter.dev, "allocated %d bytes at 0x%x \n", |
| res_size, i2c_imx->res->start); |
| dev_dbg(&i2c_imx->adapter.dev, "adapter name: \"%s\"\n", |
| i2c_imx->adapter.name); |
| dev_dbg(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n"); |
| |
| return 0; /* Return OK */ |
| |
| fail5: |
| free_irq(i2c_imx->irq, i2c_imx); |
| fail4: |
| clk_put(i2c_imx->clk); |
| fail3: |
| kfree(i2c_imx); |
| fail2: |
| iounmap(base); |
| fail1: |
| release_mem_region(res->start, resource_size(res)); |
| fail0: |
| if (pdata && pdata->exit) |
| pdata->exit(&pdev->dev); |
| return ret; /* Return error number */ |
| } |
| |
| static int __exit i2c_imx_remove(struct platform_device *pdev) |
| { |
| struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); |
| struct imxi2c_platform_data *pdata = pdev->dev.platform_data; |
| |
| /* remove adapter */ |
| dev_dbg(&i2c_imx->adapter.dev, "adapter removed\n"); |
| i2c_del_adapter(&i2c_imx->adapter); |
| platform_set_drvdata(pdev, NULL); |
| |
| /* free interrupt */ |
| free_irq(i2c_imx->irq, i2c_imx); |
| |
| /* setup chip registers to defaults */ |
| writeb(0, i2c_imx->base + IMX_I2C_IADR); |
| writeb(0, i2c_imx->base + IMX_I2C_IFDR); |
| writeb(0, i2c_imx->base + IMX_I2C_I2CR); |
| writeb(0, i2c_imx->base + IMX_I2C_I2SR); |
| |
| /* Shut down hardware */ |
| if (pdata && pdata->exit) |
| pdata->exit(&pdev->dev); |
| |
| clk_put(i2c_imx->clk); |
| |
| iounmap(i2c_imx->base); |
| release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); |
| kfree(i2c_imx); |
| return 0; |
| } |
| |
| static struct platform_driver i2c_imx_driver = { |
| .remove = __exit_p(i2c_imx_remove), |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| } |
| }; |
| |
| static int __init i2c_adap_imx_init(void) |
| { |
| return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); |
| } |
| subsys_initcall(i2c_adap_imx_init); |
| |
| static void __exit i2c_adap_imx_exit(void) |
| { |
| platform_driver_unregister(&i2c_imx_driver); |
| } |
| module_exit(i2c_adap_imx_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Darius Augulis"); |
| MODULE_DESCRIPTION("I2C adapter driver for IMX I2C bus"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |