| /* Copyright (c) 2011-2016, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| #include <linux/slab.h> |
| #include <linux/debugfs.h> |
| #include <linux/atomic.h> |
| #include <linux/uaccess.h> |
| #include "diagchar.h" |
| #include "diagfwd.h" |
| #ifdef CONFIG_DIAGFWD_BRIDGE_CODE |
| #include "diagfwd_bridge.h" |
| #endif |
| #ifdef CONFIG_USB_QCOM_DIAG_BRIDGE |
| #include "diagfwd_hsic.h" |
| #include "diagfwd_smux.h" |
| #endif |
| #ifdef CONFIG_MSM_MHI |
| #include "diagfwd_mhi.h" |
| #endif |
| #include "diagmem.h" |
| #include "diag_dci.h" |
| #include "diag_usb.h" |
| #include "diagfwd_peripheral.h" |
| #include "diagfwd_socket.h" |
| #include "diagfwd_glink.h" |
| #include "diag_debugfs.h" |
| #include "diag_ipc_logging.h" |
| |
| #define DEBUG_BUF_SIZE 4096 |
| static struct dentry *diag_dbgfs_dent; |
| static int diag_dbgfs_table_index; |
| static int diag_dbgfs_mempool_index; |
| static int diag_dbgfs_usbinfo_index; |
| static int diag_dbgfs_socketinfo_index; |
| static int diag_dbgfs_glinkinfo_index; |
| static int diag_dbgfs_hsicinfo_index; |
| static int diag_dbgfs_mhiinfo_index; |
| static int diag_dbgfs_bridgeinfo_index; |
| static int diag_dbgfs_finished; |
| static int diag_dbgfs_dci_data_index; |
| static int diag_dbgfs_dci_finished; |
| |
| static ssize_t diag_dbgfs_read_status(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int ret, i; |
| unsigned int buf_size; |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| buf_size = ksize(buf); |
| ret = scnprintf(buf, buf_size, |
| "CPU Tools ID: %d\n" |
| "Check Polling Response: %d\n" |
| "Polling Registered: %d\n" |
| "Uses Device Tree: %d\n" |
| "Apps Supports Separate CMDRSP: %d\n" |
| "Apps Supports HDLC Encoding: %d\n" |
| "Apps Supports Sockets: %d\n" |
| "Logging Mode: %d\n" |
| "RSP Buffer is Busy: %d\n" |
| "HDLC Disabled: %d\n" |
| "Time Sync Enabled: %d\n" |
| "MD session mode: %d\n" |
| "MD session mask: %d\n" |
| "Uses Time API: %d\n", |
| chk_config_get_id(), |
| chk_polling_response(), |
| driver->polling_reg_flag, |
| driver->use_device_tree, |
| driver->supports_separate_cmdrsp, |
| driver->supports_apps_hdlc_encoding, |
| driver->supports_sockets, |
| driver->logging_mode, |
| driver->rsp_buf_busy, |
| driver->hdlc_disabled, |
| driver->time_sync_enabled, |
| driver->md_session_mode, |
| driver->md_session_mask, |
| driver->uses_time_api); |
| |
| for (i = 0; i < NUM_PERIPHERALS; i++) { |
| ret += scnprintf(buf+ret, buf_size-ret, |
| "p: %s Feature: %02x %02x |%c%c%c%c%c%c%c%c|\n", |
| PERIPHERAL_STRING(i), |
| driver->feature[i].feature_mask[0], |
| driver->feature[i].feature_mask[1], |
| driver->feature[i].rcvd_feature_mask ? 'F':'f', |
| driver->feature[i].separate_cmd_rsp ? 'C':'c', |
| driver->feature[i].encode_hdlc ? 'H':'h', |
| driver->feature[i].peripheral_buffering ? 'B':'b', |
| driver->feature[i].mask_centralization ? 'M':'m', |
| driver->feature[i].stm_support ? 'Q':'q', |
| driver->feature[i].sockets_enabled ? 'S':'s', |
| driver->feature[i].sent_feature_mask ? 'T':'t'); |
| } |
| |
| #ifdef CONFIG_DIAG_OVER_USB |
| ret += scnprintf(buf+ret, buf_size-ret, |
| "USB Connected: %d\n", |
| driver->usb_connected); |
| #endif |
| |
| for (i = 0; i < DIAG_NUM_PROC; i++) { |
| ret += scnprintf(buf+ret, buf_size-ret, |
| "Real Time Mode: %d: %d\n", i, |
| driver->real_time_mode[i]); |
| } |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, ret); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_dcistats(struct file *file, |
| char __user *ubuf, size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| unsigned int bytes_remaining, bytes_written = 0; |
| unsigned int bytes_in_buf = 0, i = 0; |
| struct diag_dci_data_info *temp_data = dci_traffic; |
| unsigned int buf_size; |
| |
| buf_size = (count > DEBUG_BUF_SIZE) ? DEBUG_BUF_SIZE : count; |
| |
| if (diag_dbgfs_dci_finished) { |
| diag_dbgfs_dci_finished = 0; |
| return 0; |
| } |
| |
| buf = kcalloc(buf_size, sizeof(char), GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) |
| return -ENOMEM; |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| |
| if (diag_dbgfs_dci_data_index == 0) { |
| bytes_written = |
| scnprintf(buf, buf_size, |
| "number of clients: %d\n" |
| "dci proc active: %d\n" |
| "dci real time vote: %d\n", |
| driver->num_dci_client, |
| (driver->proc_active_mask & DIAG_PROC_DCI) ? 1 : 0, |
| (driver->proc_rt_vote_mask[DIAG_LOCAL_PROC] & |
| DIAG_PROC_DCI) ? 1 : 0); |
| bytes_in_buf += bytes_written; |
| bytes_remaining -= bytes_written; |
| #ifdef CONFIG_DIAG_OVER_USB |
| bytes_written = scnprintf(buf+bytes_in_buf, bytes_remaining, |
| "usb_connected: %d\n", |
| driver->usb_connected); |
| bytes_in_buf += bytes_written; |
| bytes_remaining -= bytes_written; |
| #endif |
| bytes_written = scnprintf(buf+bytes_in_buf, |
| bytes_remaining, |
| "dci power: active, relax: %lu, %lu\n", |
| driver->diag_dev->power.wakeup-> |
| active_count, |
| driver->diag_dev-> |
| power.wakeup->relax_count); |
| bytes_in_buf += bytes_written; |
| bytes_remaining -= bytes_written; |
| |
| } |
| temp_data += diag_dbgfs_dci_data_index; |
| for (i = diag_dbgfs_dci_data_index; i < DIAG_DCI_DEBUG_CNT; i++) { |
| if (temp_data->iteration != 0) { |
| bytes_written = scnprintf( |
| buf + bytes_in_buf, bytes_remaining, |
| "i %-5ld\t" |
| "s %-5d\t" |
| "p %-5d\t" |
| "r %-5d\t" |
| "c %-5d\t" |
| "t %-15s\n", |
| temp_data->iteration, |
| temp_data->data_size, |
| temp_data->peripheral, |
| temp_data->proc, |
| temp_data->ch_type, |
| temp_data->time_stamp); |
| bytes_in_buf += bytes_written; |
| bytes_remaining -= bytes_written; |
| /* Check if there is room for another entry */ |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| temp_data++; |
| } |
| |
| diag_dbgfs_dci_data_index = (i >= DIAG_DCI_DEBUG_CNT) ? 0 : i + 1; |
| bytes_written = simple_read_from_buffer(ubuf, count, ppos, buf, |
| bytes_in_buf); |
| kfree(buf); |
| diag_dbgfs_dci_finished = 1; |
| return bytes_written; |
| } |
| |
| static ssize_t diag_dbgfs_read_power(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int ret; |
| unsigned int buf_size; |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| buf_size = ksize(buf); |
| ret = scnprintf(buf, buf_size, |
| "DCI reference count: %d\n" |
| "DCI copy count: %d\n" |
| "DCI Client Count: %d\n\n" |
| "Memory Device reference count: %d\n" |
| "Memory Device copy count: %d\n" |
| "Logging mode: %d\n\n" |
| "Wakeup source active count: %lu\n" |
| "Wakeup source relax count: %lu\n\n", |
| driver->dci_ws.ref_count, |
| driver->dci_ws.copy_count, |
| driver->num_dci_client, |
| driver->md_ws.ref_count, |
| driver->md_ws.copy_count, |
| driver->logging_mode, |
| driver->diag_dev->power.wakeup->active_count, |
| driver->diag_dev->power.wakeup->relax_count); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, ret); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_table(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf; |
| int ret = 0; |
| int i = 0; |
| int is_polling = 0; |
| unsigned int bytes_remaining; |
| unsigned int bytes_in_buffer = 0; |
| unsigned int bytes_written; |
| unsigned int buf_size; |
| struct list_head *start; |
| struct list_head *temp; |
| struct diag_cmd_reg_t *item = NULL; |
| |
| if (diag_dbgfs_table_index == driver->cmd_reg_count) { |
| diag_dbgfs_table_index = 0; |
| return 0; |
| } |
| |
| buf_size = (count > DEBUG_BUF_SIZE) ? DEBUG_BUF_SIZE : count; |
| |
| buf = kcalloc(buf_size, sizeof(char), GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| |
| if (diag_dbgfs_table_index == 0) { |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "Client ids: Modem: %d, LPASS: %d, WCNSS: %d, SLPI: %d, APPS: %d\n", |
| PERIPHERAL_MODEM, PERIPHERAL_LPASS, |
| PERIPHERAL_WCNSS, PERIPHERAL_SENSORS, |
| APPS_DATA); |
| bytes_in_buffer += bytes_written; |
| bytes_remaining -= bytes_written; |
| } |
| |
| list_for_each_safe(start, temp, &driver->cmd_reg_list) { |
| item = list_entry(start, struct diag_cmd_reg_t, link); |
| if (i < diag_dbgfs_table_index) { |
| i++; |
| continue; |
| } |
| |
| is_polling = diag_cmd_chk_polling(&item->entry); |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "i: %3d, cmd_code: %4x, subsys_id: %4x, cmd_code_lo: %4x, cmd_code_hi: %4x, proc: %d, process_id: %5d %s\n", |
| i++, |
| item->entry.cmd_code, |
| item->entry.subsys_id, |
| item->entry.cmd_code_lo, |
| item->entry.cmd_code_hi, |
| item->proc, |
| item->pid, |
| (is_polling == DIAG_CMD_POLLING) ? |
| "<-- Polling Cmd" : ""); |
| |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_table_index = i; |
| |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_mempool(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_mempool_t *mempool = NULL; |
| |
| if (diag_dbgfs_mempool_index >= NUM_MEMORY_POOLS) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_mempool_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "%-24s\t" |
| "%-10s\t" |
| "%-5s\t" |
| "%-5s\t" |
| "%-5s\n", |
| "POOL", "HANDLE", "COUNT", "SIZE", "ITEMSIZE"); |
| bytes_in_buffer += bytes_written; |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| for (i = diag_dbgfs_mempool_index; i < NUM_MEMORY_POOLS; i++) { |
| mempool = &diag_mempools[i]; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "%-24s\t" |
| "%-10p\t" |
| "%-5d\t" |
| "%-5d\t" |
| "%-5d\n", |
| mempool->name, |
| mempool->pool, |
| mempool->count, |
| mempool->poolsize, |
| mempool->itemsize); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_mempool_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_usbinfo(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_usb_info *usb_info = NULL; |
| |
| if (diag_dbgfs_usbinfo_index >= NUM_DIAG_USB_DEV) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_usbinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = diag_dbgfs_usbinfo_index; i < NUM_DIAG_USB_DEV; i++) { |
| usb_info = &diag_usb[i]; |
| if (!usb_info->enabled) |
| continue; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "id: %d\n" |
| "name: %s\n" |
| "hdl: %pK\n" |
| "connected: %d\n" |
| "diag state: %d\n" |
| "enabled: %d\n" |
| "mempool: %s\n" |
| "read pending: %d\n" |
| "read count: %lu\n" |
| "write count: %lu\n" |
| "read work pending: %d\n" |
| "read done work pending: %d\n" |
| "connect work pending: %d\n" |
| "disconnect work pending: %d\n" |
| "max size supported: %d\n\n", |
| usb_info->id, |
| usb_info->name, |
| usb_info->hdl, |
| atomic_read(&usb_info->connected), |
| atomic_read(&usb_info->diag_state), |
| usb_info->enabled, |
| DIAG_MEMPOOL_GET_NAME(usb_info->mempool), |
| atomic_read(&usb_info->read_pending), |
| usb_info->read_cnt, |
| usb_info->write_cnt, |
| work_pending(&usb_info->read_work), |
| work_pending(&usb_info->read_done_work), |
| work_pending(&usb_info->connect_work), |
| work_pending(&usb_info->disconnect_work), |
| usb_info->max_size); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_usbinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_socketinfo(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| int j = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_socket_info *info = NULL; |
| struct diagfwd_info *fwd_ctxt = NULL; |
| |
| if (diag_dbgfs_socketinfo_index >= NUM_PERIPHERALS) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_socketinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = 0; i < NUM_TYPES; i++) { |
| for (j = 0; j < NUM_PERIPHERALS; j++) { |
| switch (i) { |
| case TYPE_DATA: |
| info = &socket_data[j]; |
| break; |
| case TYPE_CNTL: |
| info = &socket_cntl[j]; |
| break; |
| case TYPE_DCI: |
| info = &socket_dci[j]; |
| break; |
| case TYPE_CMD: |
| info = &socket_cmd[j]; |
| break; |
| case TYPE_DCI_CMD: |
| info = &socket_dci_cmd[j]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| fwd_ctxt = (struct diagfwd_info *)(info->fwd_ctxt); |
| |
| bytes_written = scnprintf(buf+bytes_in_buffer, |
| bytes_remaining, |
| "name\t\t:\t%s\n" |
| "hdl\t\t:\t%pK\n" |
| "inited\t\t:\t%d\n" |
| "opened\t\t:\t%d\n" |
| "diag_state\t:\t%d\n" |
| "buf_1 busy\t:\t%d\n" |
| "buf_2 busy\t:\t%d\n" |
| "flow ctrl count\t:\t%d\n" |
| "data_ready\t:\t%d\n" |
| "init pending\t:\t%d\n" |
| "read pending\t:\t%d\n" |
| "bytes read\t:\t%lu\n" |
| "bytes written\t:\t%lu\n" |
| "fwd inited\t:\t%d\n" |
| "fwd opened\t:\t%d\n" |
| "fwd ch_open\t:\t%d\n\n", |
| info->name, |
| info->hdl, |
| info->inited, |
| atomic_read(&info->opened), |
| atomic_read(&info->diag_state), |
| (fwd_ctxt && fwd_ctxt->buf_1) ? |
| atomic_read(&fwd_ctxt->buf_1->in_busy) : -1, |
| (fwd_ctxt && fwd_ctxt->buf_2) ? |
| atomic_read(&fwd_ctxt->buf_2->in_busy) : -1, |
| atomic_read(&info->flow_cnt), |
| info->data_ready, |
| work_pending(&info->init_work), |
| work_pending(&info->read_work), |
| (fwd_ctxt) ? fwd_ctxt->read_bytes : 0, |
| (fwd_ctxt) ? fwd_ctxt->write_bytes : 0, |
| (fwd_ctxt) ? fwd_ctxt->inited : -1, |
| (fwd_ctxt) ? |
| atomic_read(&fwd_ctxt->opened) : -1, |
| (fwd_ctxt) ? fwd_ctxt->ch_open : -1); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| } |
| diag_dbgfs_socketinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_read_glinkinfo(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| int j = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_glink_info *info = NULL; |
| struct diagfwd_info *fwd_ctxt = NULL; |
| |
| if (diag_dbgfs_glinkinfo_index >= NUM_PERIPHERALS) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_socketinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = 0; i < NUM_TYPES; i++) { |
| for (j = 0; j < NUM_PERIPHERALS; j++) { |
| switch (i) { |
| case TYPE_DATA: |
| info = &glink_data[j]; |
| break; |
| case TYPE_CNTL: |
| info = &glink_cntl[j]; |
| break; |
| case TYPE_DCI: |
| info = &glink_dci[j]; |
| break; |
| case TYPE_CMD: |
| info = &glink_cmd[j]; |
| break; |
| case TYPE_DCI_CMD: |
| info = &glink_dci_cmd[j]; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| fwd_ctxt = (struct diagfwd_info *)(info->fwd_ctxt); |
| |
| bytes_written = scnprintf(buf+bytes_in_buffer, |
| bytes_remaining, |
| "name\t\t:\t%s\n" |
| "hdl\t\t:\t%pK\n" |
| "inited\t\t:\t%d\n" |
| "opened\t\t:\t%d\n" |
| "diag_state\t:\t%d\n" |
| "buf_1 busy\t:\t%d\n" |
| "buf_2 busy\t:\t%d\n" |
| "tx_intent_ready\t:\t%d\n" |
| "open pending\t:\t%d\n" |
| "close pending\t:\t%d\n" |
| "read pending\t:\t%d\n" |
| "bytes read\t:\t%lu\n" |
| "bytes written\t:\t%lu\n" |
| "fwd inited\t:\t%d\n" |
| "fwd opened\t:\t%d\n" |
| "fwd ch_open\t:\t%d\n\n", |
| info->name, |
| info->hdl, |
| info->inited, |
| atomic_read(&info->opened), |
| atomic_read(&info->diag_state), |
| (fwd_ctxt && fwd_ctxt->buf_1) ? |
| atomic_read(&fwd_ctxt->buf_1->in_busy) : -1, |
| (fwd_ctxt && fwd_ctxt->buf_2) ? |
| atomic_read(&fwd_ctxt->buf_2->in_busy) : -1, |
| atomic_read(&info->tx_intent_ready), |
| work_pending(&info->open_work), |
| work_pending(&info->close_work), |
| work_pending(&info->read_work), |
| (fwd_ctxt) ? fwd_ctxt->read_bytes : 0, |
| (fwd_ctxt) ? fwd_ctxt->write_bytes : 0, |
| (fwd_ctxt) ? fwd_ctxt->inited : -1, |
| (fwd_ctxt) ? |
| atomic_read(&fwd_ctxt->opened) : -1, |
| (fwd_ctxt) ? fwd_ctxt->ch_open : -1); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| } |
| diag_dbgfs_glinkinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| static ssize_t diag_dbgfs_write_debug(struct file *fp, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| const int size = 10; |
| unsigned char cmd[size]; |
| long value = 0; |
| int len = 0; |
| |
| if (count < 1) |
| return -EINVAL; |
| |
| len = (count < (size - 1)) ? count : size - 1; |
| if (copy_from_user(cmd, buf, len)) |
| return -EFAULT; |
| |
| cmd[len] = 0; |
| if (cmd[len-1] == '\n') { |
| cmd[len-1] = 0; |
| len--; |
| } |
| |
| if (kstrtol(cmd, 10, &value)) |
| return -EINVAL; |
| |
| if (value < 0) |
| return -EINVAL; |
| |
| diag_debug_mask = (uint16_t)value; |
| return count; |
| } |
| |
| #ifdef CONFIG_DIAGFWD_BRIDGE_CODE |
| #ifdef CONFIG_USB_QCOM_DIAG_BRIDGE |
| static ssize_t diag_dbgfs_read_hsicinfo(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_hsic_info *hsic_info = NULL; |
| |
| if (diag_dbgfs_hsicinfo_index >= NUM_DIAG_USB_DEV) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_hsicinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = diag_dbgfs_hsicinfo_index; i < NUM_HSIC_DEV; i++) { |
| hsic_info = &diag_hsic[i]; |
| if (!hsic_info->enabled) |
| continue; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "id: %d\n" |
| "name: %s\n" |
| "bridge index: %s\n" |
| "opened: %d\n" |
| "enabled: %d\n" |
| "suspended: %d\n" |
| "mempool: %s\n" |
| "read work pending: %d\n" |
| "open work pending: %d\n" |
| "close work pending: %d\n\n", |
| hsic_info->id, |
| hsic_info->name, |
| DIAG_BRIDGE_GET_NAME(hsic_info->dev_id), |
| hsic_info->opened, |
| hsic_info->enabled, |
| hsic_info->suspended, |
| DIAG_MEMPOOL_GET_NAME(hsic_info->mempool), |
| work_pending(&hsic_info->read_work), |
| work_pending(&hsic_info->open_work), |
| work_pending(&hsic_info->close_work)); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_hsicinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| const struct file_operations diag_dbgfs_hsicinfo_ops = { |
| .read = diag_dbgfs_read_hsicinfo, |
| }; |
| #endif |
| #ifdef CONFIG_MSM_MHI |
| static ssize_t diag_dbgfs_read_mhiinfo(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diag_mhi_info *mhi_info = NULL; |
| |
| if (diag_dbgfs_mhiinfo_index >= NUM_MHI_DEV) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_mhiinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = diag_dbgfs_mhiinfo_index; i < NUM_MHI_DEV; i++) { |
| mhi_info = &diag_mhi[i]; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "id: %d\n" |
| "name: %s\n" |
| "bridge index: %s\n" |
| "mempool: %s\n" |
| "read ch opened: %d\n" |
| "read ch hdl: %pK\n" |
| "write ch opened: %d\n" |
| "write ch hdl: %pK\n" |
| "read work pending: %d\n" |
| "read done work pending: %d\n" |
| "open work pending: %d\n" |
| "close work pending: %d\n\n", |
| mhi_info->id, |
| mhi_info->name, |
| DIAG_BRIDGE_GET_NAME(mhi_info->dev_id), |
| DIAG_MEMPOOL_GET_NAME(mhi_info->mempool), |
| atomic_read(&mhi_info->read_ch.opened), |
| mhi_info->read_ch.hdl, |
| atomic_read(&mhi_info->write_ch.opened), |
| mhi_info->write_ch.hdl, |
| work_pending(&mhi_info->read_work), |
| work_pending(&mhi_info->read_done_work), |
| work_pending(&mhi_info->open_work), |
| work_pending(&mhi_info->close_work)); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_mhiinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| |
| const struct file_operations diag_dbgfs_mhiinfo_ops = { |
| .read = diag_dbgfs_read_mhiinfo, |
| }; |
| |
| #endif |
| static ssize_t diag_dbgfs_read_bridge(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char *buf = NULL; |
| int ret = 0; |
| int i = 0; |
| unsigned int buf_size; |
| unsigned int bytes_remaining = 0; |
| unsigned int bytes_written = 0; |
| unsigned int bytes_in_buffer = 0; |
| struct diagfwd_bridge_info *info = NULL; |
| |
| if (diag_dbgfs_bridgeinfo_index >= NUM_DIAG_USB_DEV) { |
| /* Done. Reset to prepare for future requests */ |
| diag_dbgfs_bridgeinfo_index = 0; |
| return 0; |
| } |
| |
| buf = kzalloc(sizeof(char) * DEBUG_BUF_SIZE, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(buf)) { |
| pr_err("diag: %s, Error allocating memory\n", __func__); |
| return -ENOMEM; |
| } |
| |
| buf_size = ksize(buf); |
| bytes_remaining = buf_size; |
| for (i = diag_dbgfs_bridgeinfo_index; i < NUM_REMOTE_DEV; i++) { |
| info = &bridge_info[i]; |
| if (!info->inited) |
| continue; |
| bytes_written = scnprintf(buf+bytes_in_buffer, bytes_remaining, |
| "id: %d\n" |
| "name: %s\n" |
| "type: %d\n" |
| "inited: %d\n" |
| "ctxt: %d\n" |
| "dev_ops: %pK\n" |
| "dci_read_buf: %pK\n" |
| "dci_read_ptr: %pK\n" |
| "dci_read_len: %d\n\n", |
| info->id, |
| info->name, |
| info->type, |
| info->inited, |
| info->ctxt, |
| info->dev_ops, |
| info->dci_read_buf, |
| info->dci_read_ptr, |
| info->dci_read_len); |
| bytes_in_buffer += bytes_written; |
| |
| /* Check if there is room to add another table entry */ |
| bytes_remaining = buf_size - bytes_in_buffer; |
| |
| if (bytes_remaining < bytes_written) |
| break; |
| } |
| diag_dbgfs_bridgeinfo_index = i+1; |
| *ppos = 0; |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, bytes_in_buffer); |
| |
| kfree(buf); |
| return ret; |
| } |
| |
| const struct file_operations diag_dbgfs_bridge_ops = { |
| .read = diag_dbgfs_read_bridge, |
| }; |
| |
| #endif |
| |
| const struct file_operations diag_dbgfs_status_ops = { |
| .read = diag_dbgfs_read_status, |
| }; |
| |
| const struct file_operations diag_dbgfs_socketinfo_ops = { |
| .read = diag_dbgfs_read_socketinfo, |
| }; |
| |
| const struct file_operations diag_dbgfs_glinkinfo_ops = { |
| .read = diag_dbgfs_read_glinkinfo, |
| }; |
| |
| const struct file_operations diag_dbgfs_table_ops = { |
| .read = diag_dbgfs_read_table, |
| }; |
| |
| const struct file_operations diag_dbgfs_mempool_ops = { |
| .read = diag_dbgfs_read_mempool, |
| }; |
| |
| const struct file_operations diag_dbgfs_usbinfo_ops = { |
| .read = diag_dbgfs_read_usbinfo, |
| }; |
| |
| const struct file_operations diag_dbgfs_dcistats_ops = { |
| .read = diag_dbgfs_read_dcistats, |
| }; |
| |
| const struct file_operations diag_dbgfs_power_ops = { |
| .read = diag_dbgfs_read_power, |
| }; |
| |
| const struct file_operations diag_dbgfs_debug_ops = { |
| .write = diag_dbgfs_write_debug |
| }; |
| |
| int diag_debugfs_init(void) |
| { |
| struct dentry *entry = NULL; |
| |
| diag_dbgfs_dent = debugfs_create_dir("diag", 0); |
| if (IS_ERR(diag_dbgfs_dent)) |
| return -ENOMEM; |
| |
| entry = debugfs_create_file("status", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_status_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("socketinfo", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_socketinfo_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("glinkinfo", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_glinkinfo_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("table", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_table_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("mempool", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_mempool_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("usbinfo", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_usbinfo_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("dci_stats", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_dcistats_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("power", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_power_ops); |
| if (!entry) |
| goto err; |
| |
| entry = debugfs_create_file("debug", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_debug_ops); |
| if (!entry) |
| goto err; |
| |
| #ifdef CONFIG_DIAGFWD_BRIDGE_CODE |
| entry = debugfs_create_file("bridge", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_bridge_ops); |
| if (!entry) |
| goto err; |
| #ifdef CONFIG_USB_QCOM_DIAG_BRIDGE |
| entry = debugfs_create_file("hsicinfo", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_hsicinfo_ops); |
| if (!entry) |
| goto err; |
| #endif |
| #ifdef CONFIG_MSM_MHI |
| entry = debugfs_create_file("mhiinfo", 0444, diag_dbgfs_dent, 0, |
| &diag_dbgfs_mhiinfo_ops); |
| if (!entry) |
| goto err; |
| #endif |
| #endif |
| diag_dbgfs_table_index = 0; |
| diag_dbgfs_mempool_index = 0; |
| diag_dbgfs_usbinfo_index = 0; |
| diag_dbgfs_socketinfo_index = 0; |
| diag_dbgfs_hsicinfo_index = 0; |
| diag_dbgfs_bridgeinfo_index = 0; |
| diag_dbgfs_mhiinfo_index = 0; |
| diag_dbgfs_finished = 0; |
| diag_dbgfs_dci_data_index = 0; |
| diag_dbgfs_dci_finished = 0; |
| |
| /* DCI related structures */ |
| dci_traffic = kzalloc(sizeof(struct diag_dci_data_info) * |
| DIAG_DCI_DEBUG_CNT, GFP_KERNEL); |
| if (ZERO_OR_NULL_PTR(dci_traffic)) |
| pr_warn("diag: could not allocate memory for dci debug info\n"); |
| |
| mutex_init(&dci_stat_mutex); |
| return 0; |
| err: |
| kfree(dci_traffic); |
| debugfs_remove_recursive(diag_dbgfs_dent); |
| return -ENOMEM; |
| } |
| |
| void diag_debugfs_cleanup(void) |
| { |
| debugfs_remove_recursive(diag_dbgfs_dent); |
| diag_dbgfs_dent = NULL; |
| kfree(dci_traffic); |
| mutex_destroy(&dci_stat_mutex); |
| } |
| #else |
| int diag_debugfs_init(void) { return 0; } |
| void diag_debugfs_cleanup(void) { } |
| #endif |