| /* |
| * Renesas USB driver |
| * |
| * Copyright (C) 2011 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| */ |
| #include <linux/interrupt.h> |
| |
| #include "common.h" |
| #include "mod.h" |
| |
| #define usbhs_priv_to_modinfo(priv) (&priv->mod_info) |
| #define usbhs_mod_info_call(priv, func, param...) \ |
| ({ \ |
| struct usbhs_mod_info *info; \ |
| info = usbhs_priv_to_modinfo(priv); \ |
| !info->func ? 0 : \ |
| info->func(param); \ |
| }) |
| |
| /* |
| * autonomy |
| * |
| * these functions are used if platform doesn't have external phy. |
| * -> there is no "notify_hotplug" callback from platform |
| * -> call "notify_hotplug" by itself |
| * -> use own interrupt to connect/disconnect |
| * -> it mean module clock is always ON |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| static int usbhsm_autonomy_get_vbus(struct platform_device *pdev) |
| { |
| struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); |
| |
| return VBSTS & usbhs_read(priv, INTSTS0); |
| } |
| |
| static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv, |
| struct usbhs_irq_state *irq_state) |
| { |
| struct platform_device *pdev = usbhs_priv_to_pdev(priv); |
| |
| renesas_usbhs_call_notify_hotplug(pdev); |
| |
| return 0; |
| } |
| |
| void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) |
| { |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| |
| info->irq_vbus = usbhsm_autonomy_irq_vbus; |
| priv->pfunc.get_vbus = usbhsm_autonomy_get_vbus; |
| |
| usbhs_irq_callback_update(priv, NULL); |
| } |
| |
| /* |
| * host / gadget functions |
| * |
| * renesas_usbhs host/gadget can register itself by below functions. |
| * these functions are called when probe |
| * |
| */ |
| void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id) |
| { |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| |
| info->mod[id] = mod; |
| mod->priv = priv; |
| } |
| |
| struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id) |
| { |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| struct usbhs_mod *ret = NULL; |
| |
| switch (id) { |
| case USBHS_HOST: |
| case USBHS_GADGET: |
| ret = info->mod[id]; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int usbhs_mod_is_host(struct usbhs_priv *priv) |
| { |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| |
| if (!mod) |
| return -EINVAL; |
| |
| return info->mod[USBHS_HOST] == mod; |
| } |
| |
| struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv) |
| { |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| |
| return info->curt; |
| } |
| |
| int usbhs_mod_change(struct usbhs_priv *priv, int id) |
| { |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| struct usbhs_mod *mod = NULL; |
| int ret = 0; |
| |
| /* id < 0 mean no current */ |
| switch (id) { |
| case USBHS_HOST: |
| case USBHS_GADGET: |
| mod = info->mod[id]; |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| info->curt = mod; |
| |
| return ret; |
| } |
| |
| static irqreturn_t usbhs_interrupt(int irq, void *data); |
| int usbhs_mod_probe(struct usbhs_priv *priv) |
| { |
| struct device *dev = usbhs_priv_to_dev(priv); |
| int ret; |
| |
| /* |
| * install host/gadget driver |
| */ |
| ret = usbhs_mod_host_probe(priv); |
| if (ret < 0) |
| return ret; |
| |
| ret = usbhs_mod_gadget_probe(priv); |
| if (ret < 0) |
| goto mod_init_host_err; |
| |
| /* irq settings */ |
| ret = devm_request_irq(dev, priv->irq, usbhs_interrupt, |
| priv->irqflags, dev_name(dev), priv); |
| if (ret) { |
| dev_err(dev, "irq request err\n"); |
| goto mod_init_gadget_err; |
| } |
| |
| return ret; |
| |
| mod_init_gadget_err: |
| usbhs_mod_gadget_remove(priv); |
| mod_init_host_err: |
| usbhs_mod_host_remove(priv); |
| |
| return ret; |
| } |
| |
| void usbhs_mod_remove(struct usbhs_priv *priv) |
| { |
| usbhs_mod_host_remove(priv); |
| usbhs_mod_gadget_remove(priv); |
| } |
| |
| /* |
| * status functions |
| */ |
| int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state) |
| { |
| int state = irq_state->intsts0 & DVSQ_MASK; |
| |
| switch (state) { |
| case POWER_STATE: |
| case DEFAULT_STATE: |
| case ADDRESS_STATE: |
| case CONFIGURATION_STATE: |
| return state; |
| } |
| |
| return -EIO; |
| } |
| |
| int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state) |
| { |
| /* |
| * return value |
| * |
| * IDLE_SETUP_STAGE |
| * READ_DATA_STAGE |
| * READ_STATUS_STAGE |
| * WRITE_DATA_STAGE |
| * WRITE_STATUS_STAGE |
| * NODATA_STATUS_STAGE |
| * SEQUENCE_ERROR |
| */ |
| return (int)irq_state->intsts0 & CTSQ_MASK; |
| } |
| |
| static int usbhs_status_get_each_irq(struct usbhs_priv *priv, |
| struct usbhs_irq_state *state) |
| { |
| struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| u16 intenb0, intenb1; |
| unsigned long flags; |
| |
| /******************** spin lock ********************/ |
| usbhs_lock(priv, flags); |
| state->intsts0 = usbhs_read(priv, INTSTS0); |
| state->intsts1 = usbhs_read(priv, INTSTS1); |
| |
| intenb0 = usbhs_read(priv, INTENB0); |
| intenb1 = usbhs_read(priv, INTENB1); |
| |
| /* mask */ |
| if (mod) { |
| state->brdysts = usbhs_read(priv, BRDYSTS); |
| state->nrdysts = usbhs_read(priv, NRDYSTS); |
| state->bempsts = usbhs_read(priv, BEMPSTS); |
| |
| state->bempsts &= mod->irq_bempsts; |
| state->brdysts &= mod->irq_brdysts; |
| } |
| usbhs_unlock(priv, flags); |
| /******************** spin unlock ******************/ |
| |
| /* |
| * Check whether the irq enable registers and the irq status are set |
| * when IRQF_SHARED is set. |
| */ |
| if (priv->irqflags & IRQF_SHARED) { |
| if (!(intenb0 & state->intsts0) && |
| !(intenb1 & state->intsts1) && |
| !(state->bempsts) && |
| !(state->brdysts)) |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * interrupt |
| */ |
| #define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */ |
| #define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */ |
| static irqreturn_t usbhs_interrupt(int irq, void *data) |
| { |
| struct usbhs_priv *priv = data; |
| struct usbhs_irq_state irq_state; |
| |
| if (usbhs_status_get_each_irq(priv, &irq_state) < 0) |
| return IRQ_NONE; |
| |
| /* |
| * clear interrupt |
| * |
| * The hardware is _very_ picky to clear interrupt bit. |
| * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value. |
| * |
| * see |
| * "Operation" |
| * - "Control Transfer (DCP)" |
| * - Function :: VALID bit should 0 |
| */ |
| usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); |
| usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); |
| |
| usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); |
| usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); |
| usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); |
| |
| /* |
| * call irq callback functions |
| * see also |
| * usbhs_irq_setting_update |
| */ |
| |
| /* INTSTS0 */ |
| if (irq_state.intsts0 & VBINT) |
| usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state); |
| |
| if (irq_state.intsts0 & DVST) |
| usbhs_mod_call(priv, irq_dev_state, priv, &irq_state); |
| |
| if (irq_state.intsts0 & CTRT) |
| usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state); |
| |
| if (irq_state.intsts0 & BEMP) |
| usbhs_mod_call(priv, irq_empty, priv, &irq_state); |
| |
| if (irq_state.intsts0 & BRDY) |
| usbhs_mod_call(priv, irq_ready, priv, &irq_state); |
| |
| /* INTSTS1 */ |
| if (irq_state.intsts1 & ATTCH) |
| usbhs_mod_call(priv, irq_attch, priv, &irq_state); |
| |
| if (irq_state.intsts1 & DTCH) |
| usbhs_mod_call(priv, irq_dtch, priv, &irq_state); |
| |
| if (irq_state.intsts1 & SIGN) |
| usbhs_mod_call(priv, irq_sign, priv, &irq_state); |
| |
| if (irq_state.intsts1 & SACK) |
| usbhs_mod_call(priv, irq_sack, priv, &irq_state); |
| |
| return IRQ_HANDLED; |
| } |
| |
| void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) |
| { |
| u16 intenb0 = 0; |
| u16 intenb1 = 0; |
| struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); |
| |
| /* |
| * BEMPENB/BRDYENB are picky. |
| * below method is required |
| * |
| * - clear INTSTS0 |
| * - update BEMPENB/BRDYENB |
| * - update INTSTS0 |
| */ |
| usbhs_write(priv, INTENB0, 0); |
| usbhs_write(priv, INTENB1, 0); |
| |
| usbhs_write(priv, BEMPENB, 0); |
| usbhs_write(priv, BRDYENB, 0); |
| |
| /* |
| * see also |
| * usbhs_interrupt |
| */ |
| |
| /* |
| * it don't enable DVSE (intenb0) here |
| * but "mod->irq_dev_state" will be called. |
| */ |
| if (info->irq_vbus) |
| intenb0 |= VBSE; |
| |
| if (mod) { |
| /* |
| * INTSTS0 |
| */ |
| if (mod->irq_ctrl_stage) |
| intenb0 |= CTRE; |
| |
| if (mod->irq_empty && mod->irq_bempsts) { |
| usbhs_write(priv, BEMPENB, mod->irq_bempsts); |
| intenb0 |= BEMPE; |
| } |
| |
| if (mod->irq_ready && mod->irq_brdysts) { |
| usbhs_write(priv, BRDYENB, mod->irq_brdysts); |
| intenb0 |= BRDYE; |
| } |
| |
| /* |
| * INTSTS1 |
| */ |
| if (mod->irq_attch) |
| intenb1 |= ATTCHE; |
| |
| if (mod->irq_dtch) |
| intenb1 |= DTCHE; |
| |
| if (mod->irq_sign) |
| intenb1 |= SIGNE; |
| |
| if (mod->irq_sack) |
| intenb1 |= SACKE; |
| } |
| |
| if (intenb0) |
| usbhs_write(priv, INTENB0, intenb0); |
| |
| if (intenb1) |
| usbhs_write(priv, INTENB1, intenb1); |
| } |