Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / cc37bb04201217b7acb11213e16cb5530c30da8f / . / drivers / usb / serial / zte_ev.c
blob: eae2c873b39ff7dbb2ecd8d7624a1e2aec14e8ca [file] [log] [blame]
/*
* ZTE_EV USB serial driver
*
* Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Copyright (C) 2012 Linux Foundation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver is based on code found in a ZTE_ENV patch that modified
* the usb-serial generic driver. Comments were left in that I think
* show the commands used to talk to the device, but I am not sure.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/uaccess.h>
#define MAX_SETUP_DATA_SIZE 32
static void debug_data(struct device *dev, const char *function, int len,
const unsigned char *data, int result)
{
dev_dbg(dev, "result = %d\n", result);
if (result == len)
dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
len, len, data);
}
static int zte_ev_usb_serial_open(struct tty_struct *tty,
struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* send 1st ctl cmd(CTL 21 22 01 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and recieve data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 96 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3 cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 80 25 00 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5 cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 80 25 00 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6 cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 34.1.0
* 16.0 DO 80 25 00 00 00 00 08
*/
len = 0x0007;
buf[0] = 0x80;
buf[1] = 0x25;
buf[2] = 0x00;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
return usb_serial_generic_open(tty, port);
}
/*
* CTL 21 22 02 00 00 00 00 00 CLASS 338.1.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 340.1.0
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 341.1.0
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 346.1.0(3)
* 16.0 DI 00 08 07 00 00 00 08 ....... 346.2.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 349.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 349.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00 CLASS 350.1.0(2)
*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 352.1.0
* 16.0 DI 00 c2 01 00 00 00 08 ....... 352.2.0
*
* 16.1 DI a1 20 00 00 00 00 02 00 02 00 . ........ 353.1.0
*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
static void zte_ev_usb_serial_close(struct usb_serial_port *port)
{
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
int result = 0;
int len;
unsigned char *buf;
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
/* send 1st ctl cmd(CTL 21 22 02 00 00 00 00 00) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 25.1.0(5)
* 16.0 DI 00 08 07 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 30.1.0
* 16.0 DO 00 c2 01 00 00 00 08 .%..... 30.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5 cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6 cmd */
/*
* 16.0 CTL a1 21 00 00 00 00 07 00 CLASS 33.1.0
* 16.0 DI 00 c2 01 00 00 00 08
*/
len = 0x0007;
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7 cmd */
/*
* 16.0 CTL 21 20 00 00 00 00 07 00 CLASS 354.1.0
* 16.0 DO 00 c2 01 00 00 00 08 ....... 354.2.0
*/
len = 0x0007;
buf[0] = 0x00;
buf[1] = 0xc2;
buf[2] = 0x01;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x00;
buf[6] = 0x08;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8 cmd */
/*
* 16.0 CTL 21 22 03 00 00 00 00 00
*/
len = 0;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
usb_serial_generic_close(port);
}
static const struct usb_device_id id_table[] = {
/* AC8710, AC8710T */
{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
/* AC8700 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
/* MG880 */
{ USB_DEVICE(0x19d2, 0xfffd) },
{ USB_DEVICE(0x19d2, 0xfffc) },
{ USB_DEVICE(0x19d2, 0xfffb) },
/* AC8710_V3 */
{ USB_DEVICE(0x19d2, 0xfff6) },
{ USB_DEVICE(0x19d2, 0xfff7) },
{ USB_DEVICE(0x19d2, 0xfff8) },
{ USB_DEVICE(0x19d2, 0xfff9) },
{ USB_DEVICE(0x19d2, 0xffee) },
/* AC2716, MC2716 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
/* AD3812 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
{ USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x05C6, 0x3197) },
{ USB_DEVICE(0x05C6, 0x6000) },
{ USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_serial_driver zio_device = {
.driver = {
.owner = THIS_MODULE,
.name = "zte_ev",
},
.id_table = id_table,
.num_ports = 1,
.open = zte_ev_usb_serial_open,
.close = zte_ev_usb_serial_close,
};
static struct usb_serial_driver * const serial_drivers[] = {
&zio_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_LICENSE("GPL v2");