| /* |
| * osd_initiator - Main body of the osd initiator library. |
| * |
| * Note: The file does not contain the advanced security functionality which |
| * is only needed by the security_manager's initiators. |
| * |
| * Copyright (C) 2008 Panasas Inc. All rights reserved. |
| * |
| * Authors: |
| * Boaz Harrosh <ooo@electrozaur.com> |
| * Benny Halevy <bhalevy@panasas.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Panasas company nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| #include <scsi/osd_initiator.h> |
| #include <scsi/osd_sec.h> |
| #include <scsi/osd_attributes.h> |
| #include <scsi/osd_sense.h> |
| |
| #include <scsi/scsi_device.h> |
| |
| #include "osd_debug.h" |
| |
| #ifndef __unused |
| # define __unused __attribute__((unused)) |
| #endif |
| |
| enum { OSD_REQ_RETRIES = 1 }; |
| |
| MODULE_AUTHOR("Boaz Harrosh <ooo@electrozaur.com>"); |
| MODULE_DESCRIPTION("open-osd initiator library libosd.ko"); |
| MODULE_LICENSE("GPL"); |
| |
| static inline void build_test(void) |
| { |
| /* structures were not packed */ |
| BUILD_BUG_ON(sizeof(struct osd_capability) != OSD_CAP_LEN); |
| BUILD_BUG_ON(sizeof(struct osdv2_cdb) != OSD_TOTAL_CDB_LEN); |
| BUILD_BUG_ON(sizeof(struct osdv1_cdb) != OSDv1_TOTAL_CDB_LEN); |
| } |
| |
| static const char *_osd_ver_desc(struct osd_request *or) |
| { |
| return osd_req_is_ver1(or) ? "OSD1" : "OSD2"; |
| } |
| |
| #define ATTR_DEF_RI(id, len) ATTR_DEF(OSD_APAGE_ROOT_INFORMATION, id, len) |
| |
| static int _osd_get_print_system_info(struct osd_dev *od, |
| void *caps, struct osd_dev_info *odi) |
| { |
| struct osd_request *or; |
| struct osd_attr get_attrs[] = { |
| ATTR_DEF_RI(OSD_ATTR_RI_VENDOR_IDENTIFICATION, 8), |
| ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_IDENTIFICATION, 16), |
| ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_MODEL, 32), |
| ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_REVISION_LEVEL, 4), |
| ATTR_DEF_RI(OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER, 64 /*variable*/), |
| ATTR_DEF_RI(OSD_ATTR_RI_OSD_NAME, 64 /*variable*/), |
| ATTR_DEF_RI(OSD_ATTR_RI_TOTAL_CAPACITY, 8), |
| ATTR_DEF_RI(OSD_ATTR_RI_USED_CAPACITY, 8), |
| ATTR_DEF_RI(OSD_ATTR_RI_NUMBER_OF_PARTITIONS, 8), |
| ATTR_DEF_RI(OSD_ATTR_RI_CLOCK, 6), |
| /* IBM-OSD-SIM Has a bug with this one put it last */ |
| ATTR_DEF_RI(OSD_ATTR_RI_OSD_SYSTEM_ID, 20), |
| }; |
| void *iter = NULL, *pFirst; |
| int nelem = ARRAY_SIZE(get_attrs), a = 0; |
| int ret; |
| |
| or = osd_start_request(od, GFP_KERNEL); |
| if (!or) |
| return -ENOMEM; |
| |
| /* get attrs */ |
| osd_req_get_attributes(or, &osd_root_object); |
| osd_req_add_get_attr_list(or, get_attrs, ARRAY_SIZE(get_attrs)); |
| |
| ret = osd_finalize_request(or, 0, caps, NULL); |
| if (ret) |
| goto out; |
| |
| ret = osd_execute_request(or); |
| if (ret) { |
| OSD_ERR("Failed to detect %s => %d\n", _osd_ver_desc(or), ret); |
| goto out; |
| } |
| |
| osd_req_decode_get_attr_list(or, get_attrs, &nelem, &iter); |
| |
| OSD_INFO("Detected %s device\n", |
| _osd_ver_desc(or)); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("VENDOR_IDENTIFICATION [%s]\n", |
| (char *)pFirst); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("PRODUCT_IDENTIFICATION [%s]\n", |
| (char *)pFirst); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("PRODUCT_MODEL [%s]\n", |
| (char *)pFirst); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("PRODUCT_REVISION_LEVEL [%u]\n", |
| pFirst ? get_unaligned_be32(pFirst) : ~0U); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("PRODUCT_SERIAL_NUMBER [%s]\n", |
| (char *)pFirst); |
| |
| odi->osdname_len = get_attrs[a].len; |
| /* Avoid NULL for memcmp optimization 0-length is good enough */ |
| odi->osdname = kzalloc(odi->osdname_len + 1, GFP_KERNEL); |
| if (!odi->osdname) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| if (odi->osdname_len) |
| memcpy(odi->osdname, get_attrs[a].val_ptr, odi->osdname_len); |
| OSD_INFO("OSD_NAME [%s]\n", odi->osdname); |
| a++; |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("TOTAL_CAPACITY [0x%llx]\n", |
| pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("USED_CAPACITY [0x%llx]\n", |
| pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); |
| |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("NUMBER_OF_PARTITIONS [%llu]\n", |
| pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL); |
| |
| if (a >= nelem) |
| goto out; |
| |
| /* FIXME: Where are the time utilities */ |
| pFirst = get_attrs[a++].val_ptr; |
| OSD_INFO("CLOCK [0x%6phN]\n", pFirst); |
| |
| if (a < nelem) { /* IBM-OSD-SIM bug, Might not have it */ |
| unsigned len = get_attrs[a].len; |
| char sid_dump[32*4 + 2]; /* 2nibbles+space+ASCII */ |
| |
| hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1, |
| sid_dump, sizeof(sid_dump), true); |
| OSD_INFO("OSD_SYSTEM_ID(%d)\n" |
| " [%s]\n", len, sid_dump); |
| |
| if (unlikely(len > sizeof(odi->systemid))) { |
| OSD_ERR("OSD Target error: OSD_SYSTEM_ID too long(%d). " |
| "device identification might not work\n", len); |
| len = sizeof(odi->systemid); |
| } |
| odi->systemid_len = len; |
| memcpy(odi->systemid, get_attrs[a].val_ptr, len); |
| a++; |
| } |
| out: |
| osd_end_request(or); |
| return ret; |
| } |
| |
| int osd_auto_detect_ver(struct osd_dev *od, |
| void *caps, struct osd_dev_info *odi) |
| { |
| int ret; |
| |
| /* Auto-detect the osd version */ |
| ret = _osd_get_print_system_info(od, caps, odi); |
| if (ret) { |
| osd_dev_set_ver(od, OSD_VER1); |
| OSD_DEBUG("converting to OSD1\n"); |
| ret = _osd_get_print_system_info(od, caps, odi); |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(osd_auto_detect_ver); |
| |
| static unsigned _osd_req_cdb_len(struct osd_request *or) |
| { |
| return osd_req_is_ver1(or) ? OSDv1_TOTAL_CDB_LEN : OSD_TOTAL_CDB_LEN; |
| } |
| |
| static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len) |
| { |
| return osd_req_is_ver1(or) ? |
| osdv1_attr_list_elem_size(len) : |
| osdv2_attr_list_elem_size(len); |
| } |
| |
| static void _osd_req_alist_elem_encode(struct osd_request *or, |
| void *attr_last, const struct osd_attr *oa) |
| { |
| if (osd_req_is_ver1(or)) { |
| struct osdv1_attributes_list_element *attr = attr_last; |
| |
| attr->attr_page = cpu_to_be32(oa->attr_page); |
| attr->attr_id = cpu_to_be32(oa->attr_id); |
| attr->attr_bytes = cpu_to_be16(oa->len); |
| memcpy(attr->attr_val, oa->val_ptr, oa->len); |
| } else { |
| struct osdv2_attributes_list_element *attr = attr_last; |
| |
| attr->attr_page = cpu_to_be32(oa->attr_page); |
| attr->attr_id = cpu_to_be32(oa->attr_id); |
| attr->attr_bytes = cpu_to_be16(oa->len); |
| memcpy(attr->attr_val, oa->val_ptr, oa->len); |
| } |
| } |
| |
| static int _osd_req_alist_elem_decode(struct osd_request *or, |
| void *cur_p, struct osd_attr *oa, unsigned max_bytes) |
| { |
| unsigned inc; |
| if (osd_req_is_ver1(or)) { |
| struct osdv1_attributes_list_element *attr = cur_p; |
| |
| if (max_bytes < sizeof(*attr)) |
| return -1; |
| |
| oa->len = be16_to_cpu(attr->attr_bytes); |
| inc = _osd_req_alist_elem_size(or, oa->len); |
| if (inc > max_bytes) |
| return -1; |
| |
| oa->attr_page = be32_to_cpu(attr->attr_page); |
| oa->attr_id = be32_to_cpu(attr->attr_id); |
| |
| /* OSD1: On empty attributes we return a pointer to 2 bytes |
| * of zeros. This keeps similar behaviour with OSD2. |
| * (See below) |
| */ |
| oa->val_ptr = likely(oa->len) ? attr->attr_val : |
| (u8 *)&attr->attr_bytes; |
| } else { |
| struct osdv2_attributes_list_element *attr = cur_p; |
| |
| if (max_bytes < sizeof(*attr)) |
| return -1; |
| |
| oa->len = be16_to_cpu(attr->attr_bytes); |
| inc = _osd_req_alist_elem_size(or, oa->len); |
| if (inc > max_bytes) |
| return -1; |
| |
| oa->attr_page = be32_to_cpu(attr->attr_page); |
| oa->attr_id = be32_to_cpu(attr->attr_id); |
| |
| /* OSD2: For convenience, on empty attributes, we return 8 bytes |
| * of zeros here. This keeps the same behaviour with OSD2r04, |
| * and is nice with null terminating ASCII fields. |
| * oa->val_ptr == NULL marks the end-of-list, or error. |
| */ |
| oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved; |
| } |
| return inc; |
| } |
| |
| static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head) |
| { |
| return osd_req_is_ver1(or) ? |
| osdv1_list_size(list_head) : |
| osdv2_list_size(list_head); |
| } |
| |
| static unsigned _osd_req_sizeof_alist_header(struct osd_request *or) |
| { |
| return osd_req_is_ver1(or) ? |
| sizeof(struct osdv1_attributes_list_header) : |
| sizeof(struct osdv2_attributes_list_header); |
| } |
| |
| static void _osd_req_set_alist_type(struct osd_request *or, |
| void *list, int list_type) |
| { |
| if (osd_req_is_ver1(or)) { |
| struct osdv1_attributes_list_header *attr_list = list; |
| |
| memset(attr_list, 0, sizeof(*attr_list)); |
| attr_list->type = list_type; |
| } else { |
| struct osdv2_attributes_list_header *attr_list = list; |
| |
| memset(attr_list, 0, sizeof(*attr_list)); |
| attr_list->type = list_type; |
| } |
| } |
| |
| static bool _osd_req_is_alist_type(struct osd_request *or, |
| void *list, int list_type) |
| { |
| if (!list) |
| return false; |
| |
| if (osd_req_is_ver1(or)) { |
| struct osdv1_attributes_list_header *attr_list = list; |
| |
| return attr_list->type == list_type; |
| } else { |
| struct osdv2_attributes_list_header *attr_list = list; |
| |
| return attr_list->type == list_type; |
| } |
| } |
| |
| /* This is for List-objects not Attributes-Lists */ |
| static void _osd_req_encode_olist(struct osd_request *or, |
| struct osd_obj_id_list *list) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| |
| if (osd_req_is_ver1(or)) { |
| cdbh->v1.list_identifier = list->list_identifier; |
| cdbh->v1.start_address = list->continuation_id; |
| } else { |
| cdbh->v2.list_identifier = list->list_identifier; |
| cdbh->v2.start_address = list->continuation_id; |
| } |
| } |
| |
| static osd_cdb_offset osd_req_encode_offset(struct osd_request *or, |
| u64 offset, unsigned *padding) |
| { |
| return __osd_encode_offset(offset, padding, |
| osd_req_is_ver1(or) ? |
| OSDv1_OFFSET_MIN_SHIFT : OSD_OFFSET_MIN_SHIFT, |
| OSD_OFFSET_MAX_SHIFT); |
| } |
| |
| static struct osd_security_parameters * |
| _osd_req_sec_params(struct osd_request *or) |
| { |
| struct osd_cdb *ocdb = &or->cdb; |
| |
| if (osd_req_is_ver1(or)) |
| return (struct osd_security_parameters *)&ocdb->v1.sec_params; |
| else |
| return (struct osd_security_parameters *)&ocdb->v2.sec_params; |
| } |
| |
| void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device) |
| { |
| memset(osdd, 0, sizeof(*osdd)); |
| osdd->scsi_device = scsi_device; |
| osdd->def_timeout = BLK_DEFAULT_SG_TIMEOUT; |
| #ifdef OSD_VER1_SUPPORT |
| osdd->version = OSD_VER2; |
| #endif |
| /* TODO: Allocate pools for osd_request attributes ... */ |
| } |
| EXPORT_SYMBOL(osd_dev_init); |
| |
| void osd_dev_fini(struct osd_dev *osdd) |
| { |
| /* TODO: De-allocate pools */ |
| |
| osdd->scsi_device = NULL; |
| } |
| EXPORT_SYMBOL(osd_dev_fini); |
| |
| static struct osd_request *_osd_request_alloc(gfp_t gfp) |
| { |
| struct osd_request *or; |
| |
| /* TODO: Use mempool with one saved request */ |
| or = kzalloc(sizeof(*or), gfp); |
| return or; |
| } |
| |
| static void _osd_request_free(struct osd_request *or) |
| { |
| kfree(or); |
| } |
| |
| struct osd_request *osd_start_request(struct osd_dev *dev, gfp_t gfp) |
| { |
| struct osd_request *or; |
| |
| or = _osd_request_alloc(gfp); |
| if (!or) |
| return NULL; |
| |
| or->osd_dev = dev; |
| or->alloc_flags = gfp; |
| or->timeout = dev->def_timeout; |
| or->retries = OSD_REQ_RETRIES; |
| |
| return or; |
| } |
| EXPORT_SYMBOL(osd_start_request); |
| |
| static void _osd_free_seg(struct osd_request *or __unused, |
| struct _osd_req_data_segment *seg) |
| { |
| if (!seg->buff || !seg->alloc_size) |
| return; |
| |
| kfree(seg->buff); |
| seg->buff = NULL; |
| seg->alloc_size = 0; |
| } |
| |
| static void _put_request(struct request *rq) |
| { |
| /* |
| * If osd_finalize_request() was called but the request was not |
| * executed through the block layer, then we must release BIOs. |
| * TODO: Keep error code in or->async_error. Need to audit all |
| * code paths. |
| */ |
| if (unlikely(rq->bio)) |
| blk_end_request(rq, -ENOMEM, blk_rq_bytes(rq)); |
| else |
| blk_put_request(rq); |
| } |
| |
| void osd_end_request(struct osd_request *or) |
| { |
| struct request *rq = or->request; |
| |
| if (rq) { |
| if (rq->next_rq) { |
| _put_request(rq->next_rq); |
| rq->next_rq = NULL; |
| } |
| |
| _put_request(rq); |
| } |
| |
| _osd_free_seg(or, &or->get_attr); |
| _osd_free_seg(or, &or->enc_get_attr); |
| _osd_free_seg(or, &or->set_attr); |
| _osd_free_seg(or, &or->cdb_cont); |
| |
| _osd_request_free(or); |
| } |
| EXPORT_SYMBOL(osd_end_request); |
| |
| static void _set_error_resid(struct osd_request *or, struct request *req, |
| int error) |
| { |
| or->async_error = error; |
| or->req_errors = req->errors ? : error; |
| or->sense_len = req->sense_len; |
| if (or->out.req) |
| or->out.residual = or->out.req->resid_len; |
| if (or->in.req) |
| or->in.residual = or->in.req->resid_len; |
| } |
| |
| int osd_execute_request(struct osd_request *or) |
| { |
| int error = blk_execute_rq(or->request->q, NULL, or->request, 0); |
| |
| _set_error_resid(or, or->request, error); |
| return error; |
| } |
| EXPORT_SYMBOL(osd_execute_request); |
| |
| static void osd_request_async_done(struct request *req, int error) |
| { |
| struct osd_request *or = req->end_io_data; |
| |
| _set_error_resid(or, req, error); |
| if (req->next_rq) { |
| __blk_put_request(req->q, req->next_rq); |
| req->next_rq = NULL; |
| } |
| |
| __blk_put_request(req->q, req); |
| or->request = NULL; |
| or->in.req = NULL; |
| or->out.req = NULL; |
| |
| if (or->async_done) |
| or->async_done(or, or->async_private); |
| else |
| osd_end_request(or); |
| } |
| |
| int osd_execute_request_async(struct osd_request *or, |
| osd_req_done_fn *done, void *private) |
| { |
| or->request->end_io_data = or; |
| or->async_private = private; |
| or->async_done = done; |
| |
| blk_execute_rq_nowait(or->request->q, NULL, or->request, 0, |
| osd_request_async_done); |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_execute_request_async); |
| |
| u8 sg_out_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; |
| u8 sg_in_pad_buffer[1 << OSDv1_OFFSET_MIN_SHIFT]; |
| |
| static int _osd_realloc_seg(struct osd_request *or, |
| struct _osd_req_data_segment *seg, unsigned max_bytes) |
| { |
| void *buff; |
| |
| if (seg->alloc_size >= max_bytes) |
| return 0; |
| |
| buff = krealloc(seg->buff, max_bytes, or->alloc_flags); |
| if (!buff) { |
| OSD_ERR("Failed to Realloc %d-bytes was-%d\n", max_bytes, |
| seg->alloc_size); |
| return -ENOMEM; |
| } |
| |
| memset(buff + seg->alloc_size, 0, max_bytes - seg->alloc_size); |
| seg->buff = buff; |
| seg->alloc_size = max_bytes; |
| return 0; |
| } |
| |
| static int _alloc_cdb_cont(struct osd_request *or, unsigned total_bytes) |
| { |
| OSD_DEBUG("total_bytes=%d\n", total_bytes); |
| return _osd_realloc_seg(or, &or->cdb_cont, total_bytes); |
| } |
| |
| static int _alloc_set_attr_list(struct osd_request *or, |
| const struct osd_attr *oa, unsigned nelem, unsigned add_bytes) |
| { |
| unsigned total_bytes = add_bytes; |
| |
| for (; nelem; --nelem, ++oa) |
| total_bytes += _osd_req_alist_elem_size(or, oa->len); |
| |
| OSD_DEBUG("total_bytes=%d\n", total_bytes); |
| return _osd_realloc_seg(or, &or->set_attr, total_bytes); |
| } |
| |
| static int _alloc_get_attr_desc(struct osd_request *or, unsigned max_bytes) |
| { |
| OSD_DEBUG("total_bytes=%d\n", max_bytes); |
| return _osd_realloc_seg(or, &or->enc_get_attr, max_bytes); |
| } |
| |
| static int _alloc_get_attr_list(struct osd_request *or) |
| { |
| OSD_DEBUG("total_bytes=%d\n", or->get_attr.total_bytes); |
| return _osd_realloc_seg(or, &or->get_attr, or->get_attr.total_bytes); |
| } |
| |
| /* |
| * Common to all OSD commands |
| */ |
| |
| static void _osdv1_req_encode_common(struct osd_request *or, |
| __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) |
| { |
| struct osdv1_cdb *ocdb = &or->cdb.v1; |
| |
| /* |
| * For speed, the commands |
| * OSD_ACT_PERFORM_SCSI_COMMAND , V1 0x8F7E, V2 0x8F7C |
| * OSD_ACT_SCSI_TASK_MANAGEMENT , V1 0x8F7F, V2 0x8F7D |
| * are not supported here. Should pass zero and set after the call |
| */ |
| act &= cpu_to_be16(~0x0080); /* V1 action code */ |
| |
| OSD_DEBUG("OSDv1 execute opcode 0x%x\n", be16_to_cpu(act)); |
| |
| ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; |
| ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; |
| ocdb->h.varlen_cdb.service_action = act; |
| |
| ocdb->h.partition = cpu_to_be64(obj->partition); |
| ocdb->h.object = cpu_to_be64(obj->id); |
| ocdb->h.v1.length = cpu_to_be64(len); |
| ocdb->h.v1.start_address = cpu_to_be64(offset); |
| } |
| |
| static void _osdv2_req_encode_common(struct osd_request *or, |
| __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) |
| { |
| struct osdv2_cdb *ocdb = &or->cdb.v2; |
| |
| OSD_DEBUG("OSDv2 execute opcode 0x%x\n", be16_to_cpu(act)); |
| |
| ocdb->h.varlen_cdb.opcode = VARIABLE_LENGTH_CMD; |
| ocdb->h.varlen_cdb.additional_cdb_length = OSD_ADDITIONAL_CDB_LENGTH; |
| ocdb->h.varlen_cdb.service_action = act; |
| |
| ocdb->h.partition = cpu_to_be64(obj->partition); |
| ocdb->h.object = cpu_to_be64(obj->id); |
| ocdb->h.v2.length = cpu_to_be64(len); |
| ocdb->h.v2.start_address = cpu_to_be64(offset); |
| } |
| |
| static void _osd_req_encode_common(struct osd_request *or, |
| __be16 act, const struct osd_obj_id *obj, u64 offset, u64 len) |
| { |
| if (osd_req_is_ver1(or)) |
| _osdv1_req_encode_common(or, act, obj, offset, len); |
| else |
| _osdv2_req_encode_common(or, act, obj, offset, len); |
| } |
| |
| /* |
| * Device commands |
| */ |
| /*TODO: void osd_req_set_master_seed_xchg(struct osd_request *, ...); */ |
| /*TODO: void osd_req_set_master_key(struct osd_request *, ...); */ |
| |
| void osd_req_format(struct osd_request *or, u64 tot_capacity) |
| { |
| _osd_req_encode_common(or, OSD_ACT_FORMAT_OSD, &osd_root_object, 0, |
| tot_capacity); |
| } |
| EXPORT_SYMBOL(osd_req_format); |
| |
| int osd_req_list_dev_partitions(struct osd_request *or, |
| osd_id initial_id, struct osd_obj_id_list *list, unsigned nelem) |
| { |
| return osd_req_list_partition_objects(or, 0, initial_id, list, nelem); |
| } |
| EXPORT_SYMBOL(osd_req_list_dev_partitions); |
| |
| static void _osd_req_encode_flush(struct osd_request *or, |
| enum osd_options_flush_scope_values op) |
| { |
| struct osd_cdb_head *ocdb = osd_cdb_head(&or->cdb); |
| |
| ocdb->command_specific_options = op; |
| } |
| |
| void osd_req_flush_obsd(struct osd_request *or, |
| enum osd_options_flush_scope_values op) |
| { |
| _osd_req_encode_common(or, OSD_ACT_FLUSH_OSD, &osd_root_object, 0, 0); |
| _osd_req_encode_flush(or, op); |
| } |
| EXPORT_SYMBOL(osd_req_flush_obsd); |
| |
| /*TODO: void osd_req_perform_scsi_command(struct osd_request *, |
| const u8 *cdb, ...); */ |
| /*TODO: void osd_req_task_management(struct osd_request *, ...); */ |
| |
| /* |
| * Partition commands |
| */ |
| static void _osd_req_encode_partition(struct osd_request *or, |
| __be16 act, osd_id partition) |
| { |
| struct osd_obj_id par = { |
| .partition = partition, |
| .id = 0, |
| }; |
| |
| _osd_req_encode_common(or, act, &par, 0, 0); |
| } |
| |
| void osd_req_create_partition(struct osd_request *or, osd_id partition) |
| { |
| _osd_req_encode_partition(or, OSD_ACT_CREATE_PARTITION, partition); |
| } |
| EXPORT_SYMBOL(osd_req_create_partition); |
| |
| void osd_req_remove_partition(struct osd_request *or, osd_id partition) |
| { |
| _osd_req_encode_partition(or, OSD_ACT_REMOVE_PARTITION, partition); |
| } |
| EXPORT_SYMBOL(osd_req_remove_partition); |
| |
| /*TODO: void osd_req_set_partition_key(struct osd_request *, |
| osd_id partition, u8 new_key_id[OSD_CRYPTO_KEYID_SIZE], |
| u8 seed[OSD_CRYPTO_SEED_SIZE]); */ |
| |
| static int _osd_req_list_objects(struct osd_request *or, |
| __be16 action, const struct osd_obj_id *obj, osd_id initial_id, |
| struct osd_obj_id_list *list, unsigned nelem) |
| { |
| struct request_queue *q = osd_request_queue(or->osd_dev); |
| u64 len = nelem * sizeof(osd_id) + sizeof(*list); |
| struct bio *bio; |
| |
| _osd_req_encode_common(or, action, obj, (u64)initial_id, len); |
| |
| if (list->list_identifier) |
| _osd_req_encode_olist(or, list); |
| |
| WARN_ON(or->in.bio); |
| bio = bio_map_kern(q, list, len, or->alloc_flags); |
| if (IS_ERR(bio)) { |
| OSD_ERR("!!! Failed to allocate list_objects BIO\n"); |
| return PTR_ERR(bio); |
| } |
| |
| bio_set_op_attrs(bio, REQ_OP_READ, 0); |
| or->in.bio = bio; |
| or->in.total_bytes = bio->bi_iter.bi_size; |
| return 0; |
| } |
| |
| int osd_req_list_partition_collections(struct osd_request *or, |
| osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, |
| unsigned nelem) |
| { |
| struct osd_obj_id par = { |
| .partition = partition, |
| .id = 0, |
| }; |
| |
| return osd_req_list_collection_objects(or, &par, initial_id, list, |
| nelem); |
| } |
| EXPORT_SYMBOL(osd_req_list_partition_collections); |
| |
| int osd_req_list_partition_objects(struct osd_request *or, |
| osd_id partition, osd_id initial_id, struct osd_obj_id_list *list, |
| unsigned nelem) |
| { |
| struct osd_obj_id par = { |
| .partition = partition, |
| .id = 0, |
| }; |
| |
| return _osd_req_list_objects(or, OSD_ACT_LIST, &par, initial_id, list, |
| nelem); |
| } |
| EXPORT_SYMBOL(osd_req_list_partition_objects); |
| |
| void osd_req_flush_partition(struct osd_request *or, |
| osd_id partition, enum osd_options_flush_scope_values op) |
| { |
| _osd_req_encode_partition(or, OSD_ACT_FLUSH_PARTITION, partition); |
| _osd_req_encode_flush(or, op); |
| } |
| EXPORT_SYMBOL(osd_req_flush_partition); |
| |
| /* |
| * Collection commands |
| */ |
| /*TODO: void osd_req_create_collection(struct osd_request *, |
| const struct osd_obj_id *); */ |
| /*TODO: void osd_req_remove_collection(struct osd_request *, |
| const struct osd_obj_id *); */ |
| |
| int osd_req_list_collection_objects(struct osd_request *or, |
| const struct osd_obj_id *obj, osd_id initial_id, |
| struct osd_obj_id_list *list, unsigned nelem) |
| { |
| return _osd_req_list_objects(or, OSD_ACT_LIST_COLLECTION, obj, |
| initial_id, list, nelem); |
| } |
| EXPORT_SYMBOL(osd_req_list_collection_objects); |
| |
| /*TODO: void query(struct osd_request *, ...); V2 */ |
| |
| void osd_req_flush_collection(struct osd_request *or, |
| const struct osd_obj_id *obj, enum osd_options_flush_scope_values op) |
| { |
| _osd_req_encode_common(or, OSD_ACT_FLUSH_PARTITION, obj, 0, 0); |
| _osd_req_encode_flush(or, op); |
| } |
| EXPORT_SYMBOL(osd_req_flush_collection); |
| |
| /*TODO: void get_member_attrs(struct osd_request *, ...); V2 */ |
| /*TODO: void set_member_attrs(struct osd_request *, ...); V2 */ |
| |
| /* |
| * Object commands |
| */ |
| void osd_req_create_object(struct osd_request *or, struct osd_obj_id *obj) |
| { |
| _osd_req_encode_common(or, OSD_ACT_CREATE, obj, 0, 0); |
| } |
| EXPORT_SYMBOL(osd_req_create_object); |
| |
| void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *obj) |
| { |
| _osd_req_encode_common(or, OSD_ACT_REMOVE, obj, 0, 0); |
| } |
| EXPORT_SYMBOL(osd_req_remove_object); |
| |
| |
| /*TODO: void osd_req_create_multi(struct osd_request *or, |
| struct osd_obj_id *first, struct osd_obj_id_list *list, unsigned nelem); |
| */ |
| |
| void osd_req_write(struct osd_request *or, |
| const struct osd_obj_id *obj, u64 offset, |
| struct bio *bio, u64 len) |
| { |
| _osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len); |
| WARN_ON(or->out.bio || or->out.total_bytes); |
| WARN_ON(!op_is_write(bio_op(bio))); |
| or->out.bio = bio; |
| or->out.total_bytes = len; |
| } |
| EXPORT_SYMBOL(osd_req_write); |
| |
| int osd_req_write_kern(struct osd_request *or, |
| const struct osd_obj_id *obj, u64 offset, void* buff, u64 len) |
| { |
| struct request_queue *req_q = osd_request_queue(or->osd_dev); |
| struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL); |
| |
| if (IS_ERR(bio)) |
| return PTR_ERR(bio); |
| |
| bio_set_op_attrs(bio, REQ_OP_WRITE, 0); |
| osd_req_write(or, obj, offset, bio, len); |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_write_kern); |
| |
| /*TODO: void osd_req_append(struct osd_request *, |
| const struct osd_obj_id *, struct bio *data_out); */ |
| /*TODO: void osd_req_create_write(struct osd_request *, |
| const struct osd_obj_id *, struct bio *data_out, u64 offset); */ |
| /*TODO: void osd_req_clear(struct osd_request *, |
| const struct osd_obj_id *, u64 offset, u64 len); */ |
| /*TODO: void osd_req_punch(struct osd_request *, |
| const struct osd_obj_id *, u64 offset, u64 len); V2 */ |
| |
| void osd_req_flush_object(struct osd_request *or, |
| const struct osd_obj_id *obj, enum osd_options_flush_scope_values op, |
| /*V2*/ u64 offset, /*V2*/ u64 len) |
| { |
| if (unlikely(osd_req_is_ver1(or) && (offset || len))) { |
| OSD_DEBUG("OSD Ver1 flush on specific range ignored\n"); |
| offset = 0; |
| len = 0; |
| } |
| |
| _osd_req_encode_common(or, OSD_ACT_FLUSH, obj, offset, len); |
| _osd_req_encode_flush(or, op); |
| } |
| EXPORT_SYMBOL(osd_req_flush_object); |
| |
| void osd_req_read(struct osd_request *or, |
| const struct osd_obj_id *obj, u64 offset, |
| struct bio *bio, u64 len) |
| { |
| _osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len); |
| WARN_ON(or->in.bio || or->in.total_bytes); |
| WARN_ON(op_is_write(bio_op(bio))); |
| or->in.bio = bio; |
| or->in.total_bytes = len; |
| } |
| EXPORT_SYMBOL(osd_req_read); |
| |
| int osd_req_read_kern(struct osd_request *or, |
| const struct osd_obj_id *obj, u64 offset, void* buff, u64 len) |
| { |
| struct request_queue *req_q = osd_request_queue(or->osd_dev); |
| struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL); |
| |
| if (IS_ERR(bio)) |
| return PTR_ERR(bio); |
| |
| osd_req_read(or, obj, offset, bio, len); |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_read_kern); |
| |
| static int _add_sg_continuation_descriptor(struct osd_request *or, |
| const struct osd_sg_entry *sglist, unsigned numentries, u64 *len) |
| { |
| struct osd_sg_continuation_descriptor *oscd; |
| u32 oscd_size; |
| unsigned i; |
| int ret; |
| |
| oscd_size = sizeof(*oscd) + numentries * sizeof(oscd->entries[0]); |
| |
| if (!or->cdb_cont.total_bytes) { |
| /* First time, jump over the header, we will write to: |
| * cdb_cont.buff + cdb_cont.total_bytes |
| */ |
| or->cdb_cont.total_bytes = |
| sizeof(struct osd_continuation_segment_header); |
| } |
| |
| ret = _alloc_cdb_cont(or, or->cdb_cont.total_bytes + oscd_size); |
| if (unlikely(ret)) |
| return ret; |
| |
| oscd = or->cdb_cont.buff + or->cdb_cont.total_bytes; |
| oscd->hdr.type = cpu_to_be16(SCATTER_GATHER_LIST); |
| oscd->hdr.pad_length = 0; |
| oscd->hdr.length = cpu_to_be32(oscd_size - sizeof(*oscd)); |
| |
| *len = 0; |
| /* copy the sg entries and convert to network byte order */ |
| for (i = 0; i < numentries; i++) { |
| oscd->entries[i].offset = cpu_to_be64(sglist[i].offset); |
| oscd->entries[i].len = cpu_to_be64(sglist[i].len); |
| *len += sglist[i].len; |
| } |
| |
| or->cdb_cont.total_bytes += oscd_size; |
| OSD_DEBUG("total_bytes=%d oscd_size=%d numentries=%d\n", |
| or->cdb_cont.total_bytes, oscd_size, numentries); |
| return 0; |
| } |
| |
| static int _osd_req_finalize_cdb_cont(struct osd_request *or, const u8 *cap_key) |
| { |
| struct request_queue *req_q = osd_request_queue(or->osd_dev); |
| struct bio *bio; |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| struct osd_continuation_segment_header *cont_seg_hdr; |
| |
| if (!or->cdb_cont.total_bytes) |
| return 0; |
| |
| cont_seg_hdr = or->cdb_cont.buff; |
| cont_seg_hdr->format = CDB_CONTINUATION_FORMAT_V2; |
| cont_seg_hdr->service_action = cdbh->varlen_cdb.service_action; |
| |
| /* create a bio for continuation segment */ |
| bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes, |
| GFP_KERNEL); |
| if (IS_ERR(bio)) |
| return PTR_ERR(bio); |
| |
| bio_set_op_attrs(bio, REQ_OP_WRITE, 0); |
| |
| /* integrity check the continuation before the bio is linked |
| * with the other data segments since the continuation |
| * integrity is separate from the other data segments. |
| */ |
| osd_sec_sign_data(cont_seg_hdr->integrity_check, bio, cap_key); |
| |
| cdbh->v2.cdb_continuation_length = cpu_to_be32(or->cdb_cont.total_bytes); |
| |
| /* we can't use _req_append_segment, because we need to link in the |
| * continuation bio to the head of the bio list - the |
| * continuation segment (if it exists) is always the first segment in |
| * the out data buffer. |
| */ |
| bio->bi_next = or->out.bio; |
| or->out.bio = bio; |
| or->out.total_bytes += or->cdb_cont.total_bytes; |
| |
| return 0; |
| } |
| |
| /* osd_req_write_sg: Takes a @bio that points to the data out buffer and an |
| * @sglist that has the scatter gather entries. Scatter-gather enables a write |
| * of multiple none-contiguous areas of an object, in a single call. The extents |
| * may overlap and/or be in any order. The only constrain is that: |
| * total_bytes(sglist) >= total_bytes(bio) |
| */ |
| int osd_req_write_sg(struct osd_request *or, |
| const struct osd_obj_id *obj, struct bio *bio, |
| const struct osd_sg_entry *sglist, unsigned numentries) |
| { |
| u64 len; |
| int ret = _add_sg_continuation_descriptor(or, sglist, numentries, &len); |
| |
| if (ret) |
| return ret; |
| osd_req_write(or, obj, 0, bio, len); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_write_sg); |
| |
| /* osd_req_read_sg: Read multiple extents of an object into @bio |
| * See osd_req_write_sg |
| */ |
| int osd_req_read_sg(struct osd_request *or, |
| const struct osd_obj_id *obj, struct bio *bio, |
| const struct osd_sg_entry *sglist, unsigned numentries) |
| { |
| u64 len; |
| u64 off; |
| int ret; |
| |
| if (numentries > 1) { |
| off = 0; |
| ret = _add_sg_continuation_descriptor(or, sglist, numentries, |
| &len); |
| if (ret) |
| return ret; |
| } else { |
| /* Optimize the case of single segment, read_sg is a |
| * bidi operation. |
| */ |
| len = sglist->len; |
| off = sglist->offset; |
| } |
| osd_req_read(or, obj, off, bio, len); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_read_sg); |
| |
| /* SG-list write/read Kern API |
| * |
| * osd_req_{write,read}_sg_kern takes an array of @buff pointers and an array |
| * of sg_entries. @numentries indicates how many pointers and sg_entries there |
| * are. By requiring an array of buff pointers. This allows a caller to do a |
| * single write/read and scatter into multiple buffers. |
| * NOTE: Each buffer + len should not cross a page boundary. |
| */ |
| static struct bio *_create_sg_bios(struct osd_request *or, |
| void **buff, const struct osd_sg_entry *sglist, unsigned numentries) |
| { |
| struct request_queue *q = osd_request_queue(or->osd_dev); |
| struct bio *bio; |
| unsigned i; |
| |
| bio = bio_kmalloc(GFP_KERNEL, numentries); |
| if (unlikely(!bio)) { |
| OSD_DEBUG("Failed to allocate BIO size=%u\n", numentries); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| for (i = 0; i < numentries; i++) { |
| unsigned offset = offset_in_page(buff[i]); |
| struct page *page = virt_to_page(buff[i]); |
| unsigned len = sglist[i].len; |
| unsigned added_len; |
| |
| BUG_ON(offset + len > PAGE_SIZE); |
| added_len = bio_add_pc_page(q, bio, page, len, offset); |
| if (unlikely(len != added_len)) { |
| OSD_DEBUG("bio_add_pc_page len(%d) != added_len(%d)\n", |
| len, added_len); |
| bio_put(bio); |
| return ERR_PTR(-ENOMEM); |
| } |
| } |
| |
| return bio; |
| } |
| |
| int osd_req_write_sg_kern(struct osd_request *or, |
| const struct osd_obj_id *obj, void **buff, |
| const struct osd_sg_entry *sglist, unsigned numentries) |
| { |
| struct bio *bio = _create_sg_bios(or, buff, sglist, numentries); |
| if (IS_ERR(bio)) |
| return PTR_ERR(bio); |
| |
| bio_set_op_attrs(bio, REQ_OP_WRITE, 0); |
| osd_req_write_sg(or, obj, bio, sglist, numentries); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_write_sg_kern); |
| |
| int osd_req_read_sg_kern(struct osd_request *or, |
| const struct osd_obj_id *obj, void **buff, |
| const struct osd_sg_entry *sglist, unsigned numentries) |
| { |
| struct bio *bio = _create_sg_bios(or, buff, sglist, numentries); |
| if (IS_ERR(bio)) |
| return PTR_ERR(bio); |
| |
| osd_req_read_sg(or, obj, bio, sglist, numentries); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_read_sg_kern); |
| |
| |
| |
| void osd_req_get_attributes(struct osd_request *or, |
| const struct osd_obj_id *obj) |
| { |
| _osd_req_encode_common(or, OSD_ACT_GET_ATTRIBUTES, obj, 0, 0); |
| } |
| EXPORT_SYMBOL(osd_req_get_attributes); |
| |
| void osd_req_set_attributes(struct osd_request *or, |
| const struct osd_obj_id *obj) |
| { |
| _osd_req_encode_common(or, OSD_ACT_SET_ATTRIBUTES, obj, 0, 0); |
| } |
| EXPORT_SYMBOL(osd_req_set_attributes); |
| |
| /* |
| * Attributes List-mode |
| */ |
| |
| int osd_req_add_set_attr_list(struct osd_request *or, |
| const struct osd_attr *oa, unsigned nelem) |
| { |
| unsigned total_bytes = or->set_attr.total_bytes; |
| void *attr_last; |
| int ret; |
| |
| if (or->attributes_mode && |
| or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; |
| |
| if (!total_bytes) { /* first-time: allocate and put list header */ |
| total_bytes = _osd_req_sizeof_alist_header(or); |
| ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); |
| if (ret) |
| return ret; |
| _osd_req_set_alist_type(or, or->set_attr.buff, |
| OSD_ATTR_LIST_SET_RETRIEVE); |
| } |
| attr_last = or->set_attr.buff + total_bytes; |
| |
| for (; nelem; --nelem) { |
| unsigned elem_size = _osd_req_alist_elem_size(or, oa->len); |
| |
| total_bytes += elem_size; |
| if (unlikely(or->set_attr.alloc_size < total_bytes)) { |
| or->set_attr.total_bytes = total_bytes - elem_size; |
| ret = _alloc_set_attr_list(or, oa, nelem, total_bytes); |
| if (ret) |
| return ret; |
| attr_last = |
| or->set_attr.buff + or->set_attr.total_bytes; |
| } |
| |
| _osd_req_alist_elem_encode(or, attr_last, oa); |
| |
| attr_last += elem_size; |
| ++oa; |
| } |
| |
| or->set_attr.total_bytes = total_bytes; |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_add_set_attr_list); |
| |
| static int _req_append_segment(struct osd_request *or, |
| unsigned padding, struct _osd_req_data_segment *seg, |
| struct _osd_req_data_segment *last_seg, struct _osd_io_info *io) |
| { |
| void *pad_buff; |
| int ret; |
| |
| if (padding) { |
| /* check if we can just add it to last buffer */ |
| if (last_seg && |
| (padding <= last_seg->alloc_size - last_seg->total_bytes)) |
| pad_buff = last_seg->buff + last_seg->total_bytes; |
| else |
| pad_buff = io->pad_buff; |
| |
| ret = blk_rq_map_kern(io->req->q, io->req, pad_buff, padding, |
| or->alloc_flags); |
| if (ret) |
| return ret; |
| io->total_bytes += padding; |
| } |
| |
| ret = blk_rq_map_kern(io->req->q, io->req, seg->buff, seg->total_bytes, |
| or->alloc_flags); |
| if (ret) |
| return ret; |
| |
| io->total_bytes += seg->total_bytes; |
| OSD_DEBUG("padding=%d buff=%p total_bytes=%d\n", padding, seg->buff, |
| seg->total_bytes); |
| return 0; |
| } |
| |
| static int _osd_req_finalize_set_attr_list(struct osd_request *or) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| unsigned padding; |
| int ret; |
| |
| if (!or->set_attr.total_bytes) { |
| cdbh->attrs_list.set_attr_offset = OSD_OFFSET_UNUSED; |
| return 0; |
| } |
| |
| cdbh->attrs_list.set_attr_bytes = cpu_to_be32(or->set_attr.total_bytes); |
| cdbh->attrs_list.set_attr_offset = |
| osd_req_encode_offset(or, or->out.total_bytes, &padding); |
| |
| ret = _req_append_segment(or, padding, &or->set_attr, |
| or->out.last_seg, &or->out); |
| if (ret) |
| return ret; |
| |
| or->out.last_seg = &or->set_attr; |
| return 0; |
| } |
| |
| int osd_req_add_get_attr_list(struct osd_request *or, |
| const struct osd_attr *oa, unsigned nelem) |
| { |
| unsigned total_bytes = or->enc_get_attr.total_bytes; |
| void *attr_last; |
| int ret; |
| |
| if (or->attributes_mode && |
| or->attributes_mode != OSD_CDB_GET_SET_ATTR_LISTS) { |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; |
| |
| /* first time calc data-in list header size */ |
| if (!or->get_attr.total_bytes) |
| or->get_attr.total_bytes = _osd_req_sizeof_alist_header(or); |
| |
| /* calc data-out info */ |
| if (!total_bytes) { /* first-time: allocate and put list header */ |
| unsigned max_bytes; |
| |
| total_bytes = _osd_req_sizeof_alist_header(or); |
| max_bytes = total_bytes + |
| nelem * sizeof(struct osd_attributes_list_attrid); |
| ret = _alloc_get_attr_desc(or, max_bytes); |
| if (ret) |
| return ret; |
| |
| _osd_req_set_alist_type(or, or->enc_get_attr.buff, |
| OSD_ATTR_LIST_GET); |
| } |
| attr_last = or->enc_get_attr.buff + total_bytes; |
| |
| for (; nelem; --nelem) { |
| struct osd_attributes_list_attrid *attrid; |
| const unsigned cur_size = sizeof(*attrid); |
| |
| total_bytes += cur_size; |
| if (unlikely(or->enc_get_attr.alloc_size < total_bytes)) { |
| or->enc_get_attr.total_bytes = total_bytes - cur_size; |
| ret = _alloc_get_attr_desc(or, |
| total_bytes + nelem * sizeof(*attrid)); |
| if (ret) |
| return ret; |
| attr_last = or->enc_get_attr.buff + |
| or->enc_get_attr.total_bytes; |
| } |
| |
| attrid = attr_last; |
| attrid->attr_page = cpu_to_be32(oa->attr_page); |
| attrid->attr_id = cpu_to_be32(oa->attr_id); |
| |
| attr_last += cur_size; |
| |
| /* calc data-in size */ |
| or->get_attr.total_bytes += |
| _osd_req_alist_elem_size(or, oa->len); |
| ++oa; |
| } |
| |
| or->enc_get_attr.total_bytes = total_bytes; |
| |
| OSD_DEBUG( |
| "get_attr.total_bytes=%u(%u) enc_get_attr.total_bytes=%u(%Zu)\n", |
| or->get_attr.total_bytes, |
| or->get_attr.total_bytes - _osd_req_sizeof_alist_header(or), |
| or->enc_get_attr.total_bytes, |
| (or->enc_get_attr.total_bytes - _osd_req_sizeof_alist_header(or)) |
| / sizeof(struct osd_attributes_list_attrid)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_add_get_attr_list); |
| |
| static int _osd_req_finalize_get_attr_list(struct osd_request *or) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| unsigned out_padding; |
| unsigned in_padding; |
| int ret; |
| |
| if (!or->enc_get_attr.total_bytes) { |
| cdbh->attrs_list.get_attr_desc_offset = OSD_OFFSET_UNUSED; |
| cdbh->attrs_list.get_attr_offset = OSD_OFFSET_UNUSED; |
| return 0; |
| } |
| |
| ret = _alloc_get_attr_list(or); |
| if (ret) |
| return ret; |
| |
| /* The out-going buffer info update */ |
| OSD_DEBUG("out-going\n"); |
| cdbh->attrs_list.get_attr_desc_bytes = |
| cpu_to_be32(or->enc_get_attr.total_bytes); |
| |
| cdbh->attrs_list.get_attr_desc_offset = |
| osd_req_encode_offset(or, or->out.total_bytes, &out_padding); |
| |
| ret = _req_append_segment(or, out_padding, &or->enc_get_attr, |
| or->out.last_seg, &or->out); |
| if (ret) |
| return ret; |
| or->out.last_seg = &or->enc_get_attr; |
| |
| /* The incoming buffer info update */ |
| OSD_DEBUG("in-coming\n"); |
| cdbh->attrs_list.get_attr_alloc_length = |
| cpu_to_be32(or->get_attr.total_bytes); |
| |
| cdbh->attrs_list.get_attr_offset = |
| osd_req_encode_offset(or, or->in.total_bytes, &in_padding); |
| |
| ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, |
| &or->in); |
| if (ret) |
| return ret; |
| or->in.last_seg = &or->get_attr; |
| |
| return 0; |
| } |
| |
| int osd_req_decode_get_attr_list(struct osd_request *or, |
| struct osd_attr *oa, int *nelem, void **iterator) |
| { |
| unsigned cur_bytes, returned_bytes; |
| int n; |
| const unsigned sizeof_attr_list = _osd_req_sizeof_alist_header(or); |
| void *cur_p; |
| |
| if (!_osd_req_is_alist_type(or, or->get_attr.buff, |
| OSD_ATTR_LIST_SET_RETRIEVE)) { |
| oa->attr_page = 0; |
| oa->attr_id = 0; |
| oa->val_ptr = NULL; |
| oa->len = 0; |
| *iterator = NULL; |
| return 0; |
| } |
| |
| if (*iterator) { |
| BUG_ON((*iterator < or->get_attr.buff) || |
| (or->get_attr.buff + or->get_attr.alloc_size < *iterator)); |
| cur_p = *iterator; |
| cur_bytes = (*iterator - or->get_attr.buff) - sizeof_attr_list; |
| returned_bytes = or->get_attr.total_bytes; |
| } else { /* first time decode the list header */ |
| cur_bytes = sizeof_attr_list; |
| returned_bytes = _osd_req_alist_size(or, or->get_attr.buff) + |
| sizeof_attr_list; |
| |
| cur_p = or->get_attr.buff + sizeof_attr_list; |
| |
| if (returned_bytes > or->get_attr.alloc_size) { |
| OSD_DEBUG("target report: space was not big enough! " |
| "Allocate=%u Needed=%u\n", |
| or->get_attr.alloc_size, |
| returned_bytes + sizeof_attr_list); |
| |
| returned_bytes = |
| or->get_attr.alloc_size - sizeof_attr_list; |
| } |
| or->get_attr.total_bytes = returned_bytes; |
| } |
| |
| for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) { |
| int inc = _osd_req_alist_elem_decode(or, cur_p, oa, |
| returned_bytes - cur_bytes); |
| |
| if (inc < 0) { |
| OSD_ERR("BAD FOOD from target. list not valid!" |
| "c=%d r=%d n=%d\n", |
| cur_bytes, returned_bytes, n); |
| oa->val_ptr = NULL; |
| cur_bytes = returned_bytes; /* break the caller loop */ |
| break; |
| } |
| |
| cur_bytes += inc; |
| cur_p += inc; |
| ++oa; |
| } |
| |
| *iterator = (returned_bytes - cur_bytes) ? cur_p : NULL; |
| *nelem = n; |
| return returned_bytes - cur_bytes; |
| } |
| EXPORT_SYMBOL(osd_req_decode_get_attr_list); |
| |
| /* |
| * Attributes Page-mode |
| */ |
| |
| int osd_req_add_get_attr_page(struct osd_request *or, |
| u32 page_id, void *attar_page, unsigned max_page_len, |
| const struct osd_attr *set_one_attr) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| |
| if (or->attributes_mode && |
| or->attributes_mode != OSD_CDB_GET_ATTR_PAGE_SET_ONE) { |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| or->attributes_mode = OSD_CDB_GET_ATTR_PAGE_SET_ONE; |
| |
| or->get_attr.buff = attar_page; |
| or->get_attr.total_bytes = max_page_len; |
| |
| cdbh->attrs_page.get_attr_page = cpu_to_be32(page_id); |
| cdbh->attrs_page.get_attr_alloc_length = cpu_to_be32(max_page_len); |
| |
| if (!set_one_attr || !set_one_attr->attr_page) |
| return 0; /* The set is optional */ |
| |
| or->set_attr.buff = set_one_attr->val_ptr; |
| or->set_attr.total_bytes = set_one_attr->len; |
| |
| cdbh->attrs_page.set_attr_page = cpu_to_be32(set_one_attr->attr_page); |
| cdbh->attrs_page.set_attr_id = cpu_to_be32(set_one_attr->attr_id); |
| cdbh->attrs_page.set_attr_length = cpu_to_be32(set_one_attr->len); |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_req_add_get_attr_page); |
| |
| static int _osd_req_finalize_attr_page(struct osd_request *or) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| unsigned in_padding, out_padding; |
| int ret; |
| |
| /* returned page */ |
| cdbh->attrs_page.get_attr_offset = |
| osd_req_encode_offset(or, or->in.total_bytes, &in_padding); |
| |
| ret = _req_append_segment(or, in_padding, &or->get_attr, NULL, |
| &or->in); |
| if (ret) |
| return ret; |
| |
| if (or->set_attr.total_bytes == 0) |
| return 0; |
| |
| /* set one value */ |
| cdbh->attrs_page.set_attr_offset = |
| osd_req_encode_offset(or, or->out.total_bytes, &out_padding); |
| |
| ret = _req_append_segment(or, out_padding, &or->set_attr, NULL, |
| &or->out); |
| return ret; |
| } |
| |
| static inline void osd_sec_parms_set_out_offset(bool is_v1, |
| struct osd_security_parameters *sec_parms, osd_cdb_offset offset) |
| { |
| if (is_v1) |
| sec_parms->v1.data_out_integrity_check_offset = offset; |
| else |
| sec_parms->v2.data_out_integrity_check_offset = offset; |
| } |
| |
| static inline void osd_sec_parms_set_in_offset(bool is_v1, |
| struct osd_security_parameters *sec_parms, osd_cdb_offset offset) |
| { |
| if (is_v1) |
| sec_parms->v1.data_in_integrity_check_offset = offset; |
| else |
| sec_parms->v2.data_in_integrity_check_offset = offset; |
| } |
| |
| static int _osd_req_finalize_data_integrity(struct osd_request *or, |
| bool has_in, bool has_out, struct bio *out_data_bio, u64 out_data_bytes, |
| const u8 *cap_key) |
| { |
| struct osd_security_parameters *sec_parms = _osd_req_sec_params(or); |
| int ret; |
| |
| if (!osd_is_sec_alldata(sec_parms)) |
| return 0; |
| |
| if (has_out) { |
| struct _osd_req_data_segment seg = { |
| .buff = &or->out_data_integ, |
| .total_bytes = sizeof(or->out_data_integ), |
| }; |
| unsigned pad; |
| |
| or->out_data_integ.data_bytes = cpu_to_be64(out_data_bytes); |
| or->out_data_integ.set_attributes_bytes = cpu_to_be64( |
| or->set_attr.total_bytes); |
| or->out_data_integ.get_attributes_bytes = cpu_to_be64( |
| or->enc_get_attr.total_bytes); |
| |
| osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms, |
| osd_req_encode_offset(or, or->out.total_bytes, &pad)); |
| |
| ret = _req_append_segment(or, pad, &seg, or->out.last_seg, |
| &or->out); |
| if (ret) |
| return ret; |
| or->out.last_seg = NULL; |
| |
| /* they are now all chained to request sign them all together */ |
| osd_sec_sign_data(&or->out_data_integ, out_data_bio, |
| cap_key); |
| } |
| |
| if (has_in) { |
| struct _osd_req_data_segment seg = { |
| .buff = &or->in_data_integ, |
| .total_bytes = sizeof(or->in_data_integ), |
| }; |
| unsigned pad; |
| |
| osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms, |
| osd_req_encode_offset(or, or->in.total_bytes, &pad)); |
| |
| ret = _req_append_segment(or, pad, &seg, or->in.last_seg, |
| &or->in); |
| if (ret) |
| return ret; |
| |
| or->in.last_seg = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * osd_finalize_request and helpers |
| */ |
| static struct request *_make_request(struct request_queue *q, bool has_write, |
| struct _osd_io_info *oii, gfp_t flags) |
| { |
| struct request *req; |
| struct bio *bio = oii->bio; |
| int ret; |
| |
| req = blk_get_request(q, has_write ? WRITE : READ, flags); |
| if (IS_ERR(req)) |
| return req; |
| blk_rq_set_block_pc(req); |
| |
| for_each_bio(bio) { |
| struct bio *bounce_bio = bio; |
| |
| blk_queue_bounce(req->q, &bounce_bio); |
| ret = blk_rq_append_bio(req, bounce_bio); |
| if (ret) |
| return ERR_PTR(ret); |
| } |
| |
| return req; |
| } |
| |
| static int _init_blk_request(struct osd_request *or, |
| bool has_in, bool has_out) |
| { |
| gfp_t flags = or->alloc_flags; |
| struct scsi_device *scsi_device = or->osd_dev->scsi_device; |
| struct request_queue *q = scsi_device->request_queue; |
| struct request *req; |
| int ret; |
| |
| req = _make_request(q, has_out, has_out ? &or->out : &or->in, flags); |
| if (IS_ERR(req)) { |
| ret = PTR_ERR(req); |
| goto out; |
| } |
| |
| or->request = req; |
| req->cmd_flags |= REQ_QUIET; |
| |
| req->timeout = or->timeout; |
| req->retries = or->retries; |
| req->sense = or->sense; |
| req->sense_len = 0; |
| |
| if (has_out) { |
| or->out.req = req; |
| if (has_in) { |
| /* allocate bidi request */ |
| req = _make_request(q, false, &or->in, flags); |
| if (IS_ERR(req)) { |
| OSD_DEBUG("blk_get_request for bidi failed\n"); |
| ret = PTR_ERR(req); |
| goto out; |
| } |
| blk_rq_set_block_pc(req); |
| or->in.req = or->request->next_rq = req; |
| } |
| } else if (has_in) |
| or->in.req = req; |
| |
| ret = 0; |
| out: |
| OSD_DEBUG("or=%p has_in=%d has_out=%d => %d, %p\n", |
| or, has_in, has_out, ret, or->request); |
| return ret; |
| } |
| |
| int osd_finalize_request(struct osd_request *or, |
| u8 options, const void *cap, const u8 *cap_key) |
| { |
| struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb); |
| bool has_in, has_out; |
| /* Save for data_integrity without the cdb_continuation */ |
| struct bio *out_data_bio = or->out.bio; |
| u64 out_data_bytes = or->out.total_bytes; |
| int ret; |
| |
| if (options & OSD_REQ_FUA) |
| cdbh->options |= OSD_CDB_FUA; |
| |
| if (options & OSD_REQ_DPO) |
| cdbh->options |= OSD_CDB_DPO; |
| |
| if (options & OSD_REQ_BYPASS_TIMESTAMPS) |
| cdbh->timestamp_control = OSD_CDB_BYPASS_TIMESTAMPS; |
| |
| osd_set_caps(&or->cdb, cap); |
| |
| has_in = or->in.bio || or->get_attr.total_bytes; |
| has_out = or->out.bio || or->cdb_cont.total_bytes || |
| or->set_attr.total_bytes || or->enc_get_attr.total_bytes; |
| |
| ret = _osd_req_finalize_cdb_cont(or, cap_key); |
| if (ret) { |
| OSD_DEBUG("_osd_req_finalize_cdb_cont failed\n"); |
| return ret; |
| } |
| ret = _init_blk_request(or, has_in, has_out); |
| if (ret) { |
| OSD_DEBUG("_init_blk_request failed\n"); |
| return ret; |
| } |
| |
| or->out.pad_buff = sg_out_pad_buffer; |
| or->in.pad_buff = sg_in_pad_buffer; |
| |
| if (!or->attributes_mode) |
| or->attributes_mode = OSD_CDB_GET_SET_ATTR_LISTS; |
| cdbh->command_specific_options |= or->attributes_mode; |
| if (or->attributes_mode == OSD_CDB_GET_ATTR_PAGE_SET_ONE) { |
| ret = _osd_req_finalize_attr_page(or); |
| if (ret) { |
| OSD_DEBUG("_osd_req_finalize_attr_page failed\n"); |
| return ret; |
| } |
| } else { |
| /* TODO: I think that for the GET_ATTR command these 2 should |
| * be reversed to keep them in execution order (for embeded |
| * targets with low memory footprint) |
| */ |
| ret = _osd_req_finalize_set_attr_list(or); |
| if (ret) { |
| OSD_DEBUG("_osd_req_finalize_set_attr_list failed\n"); |
| return ret; |
| } |
| |
| ret = _osd_req_finalize_get_attr_list(or); |
| if (ret) { |
| OSD_DEBUG("_osd_req_finalize_get_attr_list failed\n"); |
| return ret; |
| } |
| } |
| |
| ret = _osd_req_finalize_data_integrity(or, has_in, has_out, |
| out_data_bio, out_data_bytes, |
| cap_key); |
| if (ret) |
| return ret; |
| |
| osd_sec_sign_cdb(&or->cdb, cap_key); |
| |
| or->request->cmd = or->cdb.buff; |
| or->request->cmd_len = _osd_req_cdb_len(or); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(osd_finalize_request); |
| |
| static bool _is_osd_security_code(int code) |
| { |
| return (code == osd_security_audit_value_frozen) || |
| (code == osd_security_working_key_frozen) || |
| (code == osd_nonce_not_unique) || |
| (code == osd_nonce_timestamp_out_of_range) || |
| (code == osd_invalid_dataout_buffer_integrity_check_value); |
| } |
| |
| #define OSD_SENSE_PRINT1(fmt, a...) \ |
| do { \ |
| if (__cur_sense_need_output) \ |
| OSD_ERR(fmt, ##a); \ |
| } while (0) |
| |
| #define OSD_SENSE_PRINT2(fmt, a...) OSD_SENSE_PRINT1(" " fmt, ##a) |
| |
| int osd_req_decode_sense_full(struct osd_request *or, |
| struct osd_sense_info *osi, bool silent, |
| struct osd_obj_id *bad_obj_list __unused, int max_obj __unused, |
| struct osd_attr *bad_attr_list, int max_attr) |
| { |
| int sense_len, original_sense_len; |
| struct osd_sense_info local_osi; |
| struct scsi_sense_descriptor_based *ssdb; |
| void *cur_descriptor; |
| #if (CONFIG_SCSI_OSD_DPRINT_SENSE == 0) |
| const bool __cur_sense_need_output = false; |
| #else |
| bool __cur_sense_need_output = !silent; |
| #endif |
| int ret; |
| |
| if (likely(!or->req_errors)) |
| return 0; |
| |
| osi = osi ? : &local_osi; |
| memset(osi, 0, sizeof(*osi)); |
| |
| ssdb = (typeof(ssdb))or->sense; |
| sense_len = or->sense_len; |
| if ((sense_len < (int)sizeof(*ssdb) || !ssdb->sense_key)) { |
| OSD_ERR("Block-layer returned error(0x%x) but " |
| "sense_len(%u) || key(%d) is empty\n", |
| or->req_errors, sense_len, ssdb->sense_key); |
| goto analyze; |
| } |
| |
| if ((ssdb->response_code != 0x72) && (ssdb->response_code != 0x73)) { |
| OSD_ERR("Unrecognized scsi sense: rcode=%x length=%d\n", |
| ssdb->response_code, sense_len); |
| goto analyze; |
| } |
| |
| osi->key = ssdb->sense_key; |
| osi->additional_code = be16_to_cpu(ssdb->additional_sense_code); |
| original_sense_len = ssdb->additional_sense_length + 8; |
| |
| #if (CONFIG_SCSI_OSD_DPRINT_SENSE == 1) |
| if (__cur_sense_need_output) |
| __cur_sense_need_output = (osi->key > scsi_sk_recovered_error); |
| #endif |
| OSD_SENSE_PRINT1("Main Sense information key=0x%x length(%d, %d) " |
| "additional_code=0x%x async_error=%d errors=0x%x\n", |
| osi->key, original_sense_len, sense_len, |
| osi->additional_code, or->async_error, |
| or->req_errors); |
| |
| if (original_sense_len < sense_len) |
| sense_len = original_sense_len; |
| |
| cur_descriptor = ssdb->ssd; |
| sense_len -= sizeof(*ssdb); |
| while (sense_len > 0) { |
| struct scsi_sense_descriptor *ssd = cur_descriptor; |
| int cur_len = ssd->additional_length + 2; |
| |
| sense_len -= cur_len; |
| |
| if (sense_len < 0) |
| break; /* sense was truncated */ |
| |
| switch (ssd->descriptor_type) { |
| case scsi_sense_information: |
| case scsi_sense_command_specific_information: |
| { |
| struct scsi_sense_command_specific_data_descriptor |
| *sscd = cur_descriptor; |
| |
| osi->command_info = |
| get_unaligned_be64(&sscd->information) ; |
| OSD_SENSE_PRINT2( |
| "command_specific_information 0x%llx \n", |
| _LLU(osi->command_info)); |
| break; |
| } |
| case scsi_sense_key_specific: |
| { |
| struct scsi_sense_key_specific_data_descriptor |
| *ssks = cur_descriptor; |
| |
| osi->sense_info = get_unaligned_be16(&ssks->value); |
| OSD_SENSE_PRINT2( |
| "sense_key_specific_information %u" |
| "sksv_cd_bpv_bp (0x%x)\n", |
| osi->sense_info, ssks->sksv_cd_bpv_bp); |
| break; |
| } |
| case osd_sense_object_identification: |
| { /*FIXME: Keep first not last, Store in array*/ |
| struct osd_sense_identification_data_descriptor |
| *osidd = cur_descriptor; |
| |
| osi->not_initiated_command_functions = |
| le32_to_cpu(osidd->not_initiated_functions); |
| osi->completed_command_functions = |
| le32_to_cpu(osidd->completed_functions); |
| osi->obj.partition = be64_to_cpu(osidd->partition_id); |
| osi->obj.id = be64_to_cpu(osidd->object_id); |
| OSD_SENSE_PRINT2( |
| "object_identification pid=0x%llx oid=0x%llx\n", |
| _LLU(osi->obj.partition), _LLU(osi->obj.id)); |
| OSD_SENSE_PRINT2( |
| "not_initiated_bits(%x) " |
| "completed_command_bits(%x)\n", |
| osi->not_initiated_command_functions, |
| osi->completed_command_functions); |
| break; |
| } |
| case osd_sense_response_integrity_check: |
| { |
| struct osd_sense_response_integrity_check_descriptor |
| *osricd = cur_descriptor; |
| const unsigned len = |
| sizeof(osricd->integrity_check_value); |
| char key_dump[len*4 + 2]; /* 2nibbles+space+ASCII */ |
| |
| hex_dump_to_buffer(osricd->integrity_check_value, len, |
| 32, 1, key_dump, sizeof(key_dump), true); |
| OSD_SENSE_PRINT2("response_integrity [%s]\n", key_dump); |
| } |
| case osd_sense_attribute_identification: |
| { |
| struct osd_sense_attributes_data_descriptor |
| *osadd = cur_descriptor; |
| unsigned len = min(cur_len, sense_len); |
| struct osd_sense_attr *pattr = osadd->sense_attrs; |
| |
| while (len >= sizeof(*pattr)) { |
| u32 attr_page = be32_to_cpu(pattr->attr_page); |
| u32 attr_id = be32_to_cpu(pattr->attr_id); |
| |
| if (!osi->attr.attr_page) { |
| osi->attr.attr_page = attr_page; |
| osi->attr.attr_id = attr_id; |
| } |
| |
| if (bad_attr_list && max_attr) { |
| bad_attr_list->attr_page = attr_page; |
| bad_attr_list->attr_id = attr_id; |
| bad_attr_list++; |
| max_attr--; |
| } |
| |
| len -= sizeof(*pattr); |
| OSD_SENSE_PRINT2( |
| "osd_sense_attribute_identification" |
| "attr_page=0x%x attr_id=0x%x\n", |
| attr_page, attr_id); |
| } |
| } |
| /*These are not legal for OSD*/ |
| case scsi_sense_field_replaceable_unit: |
| OSD_SENSE_PRINT2("scsi_sense_field_replaceable_unit\n"); |
| break; |
| case scsi_sense_stream_commands: |
| OSD_SENSE_PRINT2("scsi_sense_stream_commands\n"); |
| break; |
| case scsi_sense_block_commands: |
| OSD_SENSE_PRINT2("scsi_sense_block_commands\n"); |
| break; |
| case scsi_sense_ata_return: |
| OSD_SENSE_PRINT2("scsi_sense_ata_return\n"); |
| break; |
| default: |
| if (ssd->descriptor_type <= scsi_sense_Reserved_last) |
| OSD_SENSE_PRINT2( |
| "scsi_sense Reserved descriptor (0x%x)", |
| ssd->descriptor_type); |
| else |
| OSD_SENSE_PRINT2( |
| "scsi_sense Vendor descriptor (0x%x)", |
| ssd->descriptor_type); |
| } |
| |
| cur_descriptor += cur_len; |
| } |
| |
| analyze: |
| if (!osi->key) { |
| /* scsi sense is Empty, the request was never issued to target |
| * linux return code might tell us what happened. |
| */ |
| if (or->async_error == -ENOMEM) |
| osi->osd_err_pri = OSD_ERR_PRI_RESOURCE; |
| else |
| osi->osd_err_pri = OSD_ERR_PRI_UNREACHABLE; |
| ret = or->async_error; |
| } else if (osi->key <= scsi_sk_recovered_error) { |
| osi->osd_err_pri = 0; |
| ret = 0; |
| } else if (osi->additional_code == scsi_invalid_field_in_cdb) { |
| if (osi->cdb_field_offset == OSD_CFO_STARTING_BYTE) { |
| osi->osd_err_pri = OSD_ERR_PRI_CLEAR_PAGES; |
| ret = -EFAULT; /* caller should recover from this */ |
| } else if (osi->cdb_field_offset == OSD_CFO_OBJECT_ID) { |
| osi->osd_err_pri = OSD_ERR_PRI_NOT_FOUND; |
| ret = -ENOENT; |
| } else if (osi->cdb_field_offset == OSD_CFO_PERMISSIONS) { |
| osi->osd_err_pri = OSD_ERR_PRI_NO_ACCESS; |
| ret = -EACCES; |
| } else { |
| osi->osd_err_pri = OSD_ERR_PRI_BAD_CRED; |
| ret = -EINVAL; |
| } |
| } else if (osi->additional_code == osd_quota_error) { |
| osi->osd_err_pri = OSD_ERR_PRI_NO_SPACE; |
| ret = -ENOSPC; |
| } else if (_is_osd_security_code(osi->additional_code)) { |
| osi->osd_err_pri = OSD_ERR_PRI_BAD_CRED; |
| ret = -EINVAL; |
| } else { |
| osi->osd_err_pri = OSD_ERR_PRI_EIO; |
| ret = -EIO; |
| } |
| |
| if (!or->out.residual) |
| or->out.residual = or->out.total_bytes; |
| if (!or->in.residual) |
| or->in.residual = or->in.total_bytes; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(osd_req_decode_sense_full); |
| |
| /* |
| * Implementation of osd_sec.h API |
| * TODO: Move to a separate osd_sec.c file at a later stage. |
| */ |
| |
| enum { OSD_SEC_CAP_V1_ALL_CAPS = |
| OSD_SEC_CAP_APPEND | OSD_SEC_CAP_OBJ_MGMT | OSD_SEC_CAP_REMOVE | |
| OSD_SEC_CAP_CREATE | OSD_SEC_CAP_SET_ATTR | OSD_SEC_CAP_GET_ATTR | |
| OSD_SEC_CAP_WRITE | OSD_SEC_CAP_READ | OSD_SEC_CAP_POL_SEC | |
| OSD_SEC_CAP_GLOBAL | OSD_SEC_CAP_DEV_MGMT |
| }; |
| |
| enum { OSD_SEC_CAP_V2_ALL_CAPS = |
| OSD_SEC_CAP_V1_ALL_CAPS | OSD_SEC_CAP_QUERY | OSD_SEC_CAP_M_OBJECT |
| }; |
| |
| void osd_sec_init_nosec_doall_caps(void *caps, |
| const struct osd_obj_id *obj, bool is_collection, const bool is_v1) |
| { |
| struct osd_capability *cap = caps; |
| u8 type; |
| u8 descriptor_type; |
| |
| if (likely(obj->id)) { |
| if (unlikely(is_collection)) { |
| type = OSD_SEC_OBJ_COLLECTION; |
| descriptor_type = is_v1 ? OSD_SEC_OBJ_DESC_OBJ : |
| OSD_SEC_OBJ_DESC_COL; |
| } else { |
| type = OSD_SEC_OBJ_USER; |
| descriptor_type = OSD_SEC_OBJ_DESC_OBJ; |
| } |
| WARN_ON(!obj->partition); |
| } else { |
| type = obj->partition ? OSD_SEC_OBJ_PARTITION : |
| OSD_SEC_OBJ_ROOT; |
| descriptor_type = OSD_SEC_OBJ_DESC_PAR; |
| } |
| |
| memset(cap, 0, sizeof(*cap)); |
| |
| cap->h.format = OSD_SEC_CAP_FORMAT_VER1; |
| cap->h.integrity_algorithm__key_version = 0; /* MAKE_BYTE(0, 0); */ |
| cap->h.security_method = OSD_SEC_NOSEC; |
| /* cap->expiration_time; |
| cap->AUDIT[30-10]; |
| cap->discriminator[42-30]; |
| cap->object_created_time; */ |
| cap->h.object_type = type; |
| osd_sec_set_caps(&cap->h, OSD_SEC_CAP_V1_ALL_CAPS); |
| cap->h.object_descriptor_type = descriptor_type; |
| cap->od.obj_desc.policy_access_tag = 0; |
| cap->od.obj_desc.allowed_partition_id = cpu_to_be64(obj->partition); |
| cap->od.obj_desc.allowed_object_id = cpu_to_be64(obj->id); |
| } |
| EXPORT_SYMBOL(osd_sec_init_nosec_doall_caps); |
| |
| /* FIXME: Extract version from caps pointer. |
| * Also Pete's target only supports caps from OSDv1 for now |
| */ |
| void osd_set_caps(struct osd_cdb *cdb, const void *caps) |
| { |
| /* NOTE: They start at same address */ |
| memcpy(&cdb->v1.caps, caps, OSDv1_CAP_LEN); |
| } |
| |
| bool osd_is_sec_alldata(struct osd_security_parameters *sec_parms __unused) |
| { |
| return false; |
| } |
| |
| void osd_sec_sign_cdb(struct osd_cdb *ocdb __unused, const u8 *cap_key __unused) |
| { |
| } |
| |
| void osd_sec_sign_data(void *data_integ __unused, |
| struct bio *bio __unused, const u8 *cap_key __unused) |
| { |
| } |
| |
| /* |
| * Declared in osd_protocol.h |
| * 4.12.5 Data-In and Data-Out buffer offsets |
| * byte offset = mantissa * (2^(exponent+8)) |
| * Returns the smallest allowed encoded offset that contains given @offset |
| * The actual encoded offset returned is @offset + *@padding. |
| */ |
| osd_cdb_offset __osd_encode_offset( |
| u64 offset, unsigned *padding, int min_shift, int max_shift) |
| { |
| u64 try_offset = -1, mod, align; |
| osd_cdb_offset be32_offset; |
| int shift; |
| |
| *padding = 0; |
| if (!offset) |
| return 0; |
| |
| for (shift = min_shift; shift < max_shift; ++shift) { |
| try_offset = offset >> shift; |
| if (try_offset < (1 << OSD_OFFSET_MAX_BITS)) |
| break; |
| } |
| |
| BUG_ON(shift == max_shift); |
| |
| align = 1 << shift; |
| mod = offset & (align - 1); |
| if (mod) { |
| *padding = align - mod; |
| try_offset += 1; |
| } |
| |
| try_offset |= ((shift - 8) & 0xf) << 28; |
| be32_offset = cpu_to_be32((u32)try_offset); |
| |
| OSD_DEBUG("offset=%llu mantissa=%llu exp=%d encoded=%x pad=%d\n", |
| _LLU(offset), _LLU(try_offset & 0x0FFFFFFF), shift, |
| be32_offset, *padding); |
| return be32_offset; |
| } |