blob: 3601763ee5667189c7cdcbd6a3e8f3667b3e33c9 [file] [log] [blame]
/*
* OMAP2/3 PRM module functions
*
* Copyright (C) 2010-2011 Texas Instruments, Inc.
* Copyright (C) 2010 Nokia Corporation
* BenoƮt Cousson
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include "vp.h"
#include "prm2xxx_3xxx.h"
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
};
static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
.ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
.mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
.nr_regs = 1,
.irqs = omap3_prcm_irqs,
.nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
.irq = 11 + OMAP_INTC_START,
.read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
.ocp_barrier = &omap3xxx_prm_ocp_barrier,
.save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
.restore_irqen = &omap3xxx_prm_restore_irqen,
};
u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
{
return __raw_readl(prm_base + module + idx);
}
void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
{
__raw_writel(val, prm_base + module + idx);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
{
u32 v;
v = omap2_prm_read_mod_reg(module, idx);
v &= ~mask;
v |= bits;
omap2_prm_write_mod_reg(v, module, idx);
return v;
}
/* Read a PRM register, AND it, and shift the result down to bit 0 */
u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
{
u32 v;
v = omap2_prm_read_mod_reg(domain, idx);
v &= mask;
v >>= __ffs(mask);
return v;
}
u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
}
u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
{
return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
}
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
* @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @shift: register bit shift corresponding to the reset line to check
*
* Returns 1 if the (sub)module hardreset line is currently asserted,
* 0 if the (sub)module hardreset line is not currently asserted, or
* -EINVAL if called while running on a non-OMAP2/3 chip.
*/
int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
{
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
}
/**
* omap2_prm_assert_hardreset - assert the HW reset line of a submodule
* @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @shift: register bit shift corresponding to the reset line to assert
*
* Some IPs like dsp or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* IP. These modules may have multiple hard-reset lines that reset
* different 'submodules' inside the IP block. This function will
* place the submodule into reset. Returns 0 upon success or -EINVAL
* upon an argument error.
*/
int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
{
u32 mask;
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
mask = 1 << shift;
omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
return 0;
}
/**
* omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
* @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @rst_shift: register bit shift corresponding to the reset line to deassert
* @st_shift: register bit shift for the status of the deasserted submodule
*
* Some IPs like dsp or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* IP. These modules may have multiple hard-reset lines that reset
* different 'submodules' inside the IP block. This function will
* take the submodule out of reset and wait until the PRCM indicates
* that the reset has completed before returning. Returns 0 upon success or
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
{
u32 rst, st;
int c;
if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
return -EINVAL;
rst = 1 << rst_shift;
st = 1 << st_shift;
/* Check the current status to avoid de-asserting the line twice */
if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, rst) == 0)
return -EEXIST;
/* Clear the reset status by writing 1 to the status bit */
omap2_prm_rmw_mod_reg_bits(0xffffffff, st, prm_mod, OMAP2_RM_RSTST);
/* de-assert the reset control line */
omap2_prm_rmw_mod_reg_bits(rst, 0, prm_mod, OMAP2_RM_RSTCTRL);
/* wait the status to be set */
omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
st),
MAX_MODULE_HARDRESET_WAIT, c);
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
}
/* PRM VP */
/*
* struct omap3_vp - OMAP3 VP register access description.
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
*/
struct omap3_vp {
u32 tranxdone_status;
};
static struct omap3_vp omap3_vp[] = {
[OMAP3_VP_VDD_MPU_ID] = {
.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
},
[OMAP3_VP_VDD_CORE_ID] = {
.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
},
};
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
return irqstatus & vp->tranxdone_status;
}
void omap3_prm_vp_clear_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
omap2_prm_write_mod_reg(vp->tranxdone_status,
OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
}
u32 omap3_prm_vcvp_read(u8 offset)
{
return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
}
void omap3_prm_vcvp_write(u32 val, u8 offset)
{
omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
}
u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
{
return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
}
/**
* omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
* @events: ptr to a u32, preallocated by caller
*
* Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
void omap3xxx_prm_read_pending_irqs(unsigned long *events)
{
u32 mask, st;
/* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
events[0] = mask & st;
}
/**
* omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
*
* Force any buffered writes to the PRM IP block to complete. Needed
* by the PRM IRQ handler, which reads and writes directly to the IP
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
void omap3xxx_prm_ocp_barrier(void)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
*
* Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
* must be allocated by the caller. Intended to be used in the PRM
* interrupt handler suspend callback. The OCP barrier is needed to
* ensure the write to disable PRM interrupts reaches the PRM before
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
/* OCP barrier */
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
/**
* omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
*
* Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
* to be used in the PRM interrupt handler resume callback to restore
* values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
void omap3xxx_prm_restore_irqen(u32 *saved_mask)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
}
/**
* omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
*
* Clear any previously-latched I/O wakeup events and ensure that the
* I/O wakeup gates are aligned with the current mux settings. Works
* by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
* deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
* return value.
*/
void omap3xxx_prm_reconfigure_io_chain(void)
{
int i = 0;
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
OMAP3430_ST_IO_CHAIN_MASK,
MAX_IOPAD_LATCH_TIME, i);
if (i == MAX_IOPAD_LATCH_TIME)
pr_warn("PRM: I/O chain clock line assertion timed out\n");
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
PM_WKEN);
omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
PM_WKST);
omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
}
/**
* omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
* Activates the I/O wakeup event latches and allows events logged by
* those latches to signal a wakeup event to the PRCM. For I/O
* wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
* registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
* No return value.
*/
static void __init omap3xxx_prm_enable_io_wakeup(void)
{
if (omap3_has_io_wakeup())
omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
}
static int __init omap3xxx_prcm_init(void)
{
int ret = 0;
if (cpu_is_omap34xx()) {
omap3xxx_prm_enable_io_wakeup();
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
}
return ret;
}
subsys_initcall(omap3xxx_prcm_init);