Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
Revert "tcp: Always set urgent pointer if it's beyond snd_nxt"
ipv6: Copy cork options in ip6_append_data
udp: Fix UDP short packet false positive
gianfar: Fix potential soft reset race
gianfar: Fix BD_LENGTH_MASK definition
cxgb3: Fix lro switch
iwlwifi: save PCI state before suspend, restore after resume
iwlwifi: clean key table in iwl_clear_stations_table
diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt
index 84da2a4..12fedb7 100644
--- a/Documentation/filesystems/ubifs.txt
+++ b/Documentation/filesystems/ubifs.txt
@@ -79,13 +79,6 @@
(*) == default.
-norm_unmount (*) commit on unmount; the journal is committed
- when the file-system is unmounted so that the
- next mount does not have to replay the journal
- and it becomes very fast;
-fast_unmount do not commit on unmount; this option makes
- unmount faster, but the next mount slower
- because of the need to replay the journal.
bulk_read read more in one go to take advantage of flash
media that read faster sequentially
no_bulk_read (*) do not bulk-read
diff --git a/MAINTAINERS b/MAINTAINERS
index 474ec0c..421504b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -911,7 +911,7 @@
BLACKFIN ARCHITECTURE
P: Bryan Wu
M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
@@ -2212,7 +2212,7 @@
M: sean.hefty@intel.com
P: Hal Rosenstock
M: hal.rosenstock@gmail.com
-L: general@lists.openfabrics.org
+L: general@lists.openfabrics.org (moderated for non-subscribers)
W: http://www.openib.org/
T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
@@ -4841,6 +4841,7 @@
M: mingo@redhat.com
P: H. Peter Anvin
M: hpa@zytor.com
+M: x86@kernel.org
L: linux-kernel@vger.kernel.org
T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
diff --git a/arch/alpha/include/asm/bug.h b/arch/alpha/include/asm/bug.h
index 7b85b7c..1720c8a 100644
--- a/arch/alpha/include/asm/bug.h
+++ b/arch/alpha/include/asm/bug.h
@@ -8,12 +8,12 @@
/* ??? Would be nice to use .gprel32 here, but we can't be sure that the
function loaded the GP, so this could fail in modules. */
-#define BUG() { \
+#define BUG() do { \
__asm__ __volatile__( \
"call_pal %0 # bugchk\n\t" \
".long %1\n\t.8byte %2" \
: : "i"(PAL_bugchk), "i"(__LINE__), "i"(__FILE__)); \
- for ( ; ; ); }
+ for ( ; ; ); } while (0)
#define HAVE_ARCH_BUG
#endif
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 77b0474..85040cf 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -650,6 +650,7 @@
no_fp: mov pc, lr
__und_usr_unknown:
+ enable_irq
mov r0, sp
adr lr, ret_from_exception
b do_undefinstr
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 06269ea..49a6ba9 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -136,7 +136,7 @@
ldmia sp!, {r0-r3, pc}
trace:
- ldr r1, [fp, #-4]
+ ldr r1, [fp, #-4] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 7141cee..363db18 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -101,7 +101,7 @@
/* Handle bad interrupts */
static struct irq_desc bad_irq_desc = {
.handle_irq = handle_bad_irq,
- .lock = SPIN_LOCK_UNLOCKED
+ .lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
};
/*
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index c2a96e3..e61967d 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -27,6 +27,7 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
+#include <mach/irqs.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 77382d8..ba5d7c0 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -181,7 +181,7 @@
}
size = OMAP1_MMC_SIZE;
- omap_mmc_add(i, base, size, irq, mmc_data[i]);
+ omap_mmc_add("mmci-omap", i, base, size, irq, mmc_data[i]);
};
}
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index ca7a0cc..575ba31 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -28,81 +28,8 @@
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
-struct mcbsp_internal_clk {
- struct clk clk;
- struct clk **childs;
- int n_childs;
-};
-
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
- const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
- int i;
-
- mclk->n_childs = ARRAY_SIZE(clk_names);
- mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
- GFP_KERNEL);
-
- for (i = 0; i < mclk->n_childs; i++) {
- /* We fake a platform device to get correct device id */
- struct platform_device pdev;
-
- pdev.dev.bus = &platform_bus_type;
- pdev.id = mclk->clk.id;
- mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
- if (IS_ERR(mclk->childs[i]))
- printk(KERN_ERR "Could not get clock %s (%d).\n",
- clk_names[i], mclk->clk.id);
- }
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
- struct mcbsp_internal_clk *mclk = container_of(clk,
- struct mcbsp_internal_clk, clk);
- int i;
-
- for (i = 0; i < mclk->n_childs; i++)
- clk_enable(mclk->childs[i]);
- return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
- struct mcbsp_internal_clk *mclk = container_of(clk,
- struct mcbsp_internal_clk, clk);
- int i;
-
- for (i = 0; i < mclk->n_childs; i++)
- clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 1,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 3,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
-};
-
-#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size 0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{ }
+const char *clk_names[] = { "dsp_ck", "api_ck", "dspxor_ck" };
#endif
static void omap1_mcbsp_request(unsigned int id)
@@ -167,8 +94,9 @@
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_name = "mcbsp_clk",
- },
+ .clk_names = clk_names,
+ .num_clks = 3,
+ },
{
.phys_base = OMAP1510_MCBSP2_BASE,
.dma_rx_sync = OMAP_DMA_MCBSP2_RX,
@@ -184,7 +112,8 @@
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 3,
},
};
#define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata)
@@ -202,7 +131,8 @@
.rx_irq = INT_McBSP1RX,
.tx_irq = INT_McBSP1TX,
.ops = &omap1_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 3,
},
{
.phys_base = OMAP1610_MCBSP2_BASE,
@@ -219,7 +149,8 @@
.rx_irq = INT_McBSP3RX,
.tx_irq = INT_McBSP3TX,
.ops = &omap1_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 3,
},
};
#define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata)
@@ -230,15 +161,6 @@
int __init omap1_mcbsp_init(void)
{
- int i;
-
- for (i = 0; i < omap_mcbsp_clks_size; i++) {
- if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
- omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
- clk_register(&omap_mcbsp_clks[i].clk);
- }
- }
-
if (cpu_is_omap730())
omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
if (cpu_is_omap15xx())
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 9d7216f..ce03fa7 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -421,6 +421,7 @@
int nr_controllers)
{
int i;
+ char *name;
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
@@ -450,12 +451,14 @@
continue;
}
- if (cpu_is_omap2420())
+ if (cpu_is_omap2420()) {
size = OMAP2420_MMC_SIZE;
- else
+ name = "mmci-omap";
+ } else {
size = HSMMC_SIZE;
-
- omap_mmc_add(i, base, size, irq, mmc_data[i]);
+ name = "mmci-omap-hs";
+ }
+ omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
};
}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index b0f8e7d..b52a02f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -172,9 +172,13 @@
omap_revision = OMAP3430_REV_ES3_0;
rev_name = "ES3.0";
break;
+ case 4:
+ omap_revision = OMAP3430_REV_ES3_1;
+ rev_name = "ES3.1";
+ break;
default:
/* Use the latest known revision as default */
- omap_revision = OMAP3430_REV_ES3_0;
+ omap_revision = OMAP3430_REV_ES3_1;
rev_name = "Unknown revision\n";
}
}
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 636e282..9ba20d9 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -134,6 +134,7 @@
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
+ .disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index e20023c..a9e631f 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -24,106 +24,7 @@
#include <mach/cpu.h>
#include <mach/mcbsp.h>
-struct mcbsp_internal_clk {
- struct clk clk;
- struct clk **childs;
- int n_childs;
-};
-
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-static void omap_mcbsp_clk_init(struct mcbsp_internal_clk *mclk)
-{
- const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
- int i;
-
- mclk->n_childs = ARRAY_SIZE(clk_names);
- mclk->childs = kzalloc(mclk->n_childs * sizeof(struct clk *),
- GFP_KERNEL);
-
- for (i = 0; i < mclk->n_childs; i++) {
- /* We fake a platform device to get correct device id */
- struct platform_device pdev;
-
- pdev.dev.bus = &platform_bus_type;
- pdev.id = mclk->clk.id;
- mclk->childs[i] = clk_get(&pdev.dev, clk_names[i]);
- if (IS_ERR(mclk->childs[i]))
- printk(KERN_ERR "Could not get clock %s (%d).\n",
- clk_names[i], mclk->clk.id);
- }
-}
-
-static int omap_mcbsp_clk_enable(struct clk *clk)
-{
- struct mcbsp_internal_clk *mclk = container_of(clk,
- struct mcbsp_internal_clk, clk);
- int i;
-
- for (i = 0; i < mclk->n_childs; i++)
- clk_enable(mclk->childs[i]);
- return 0;
-}
-
-static void omap_mcbsp_clk_disable(struct clk *clk)
-{
- struct mcbsp_internal_clk *mclk = container_of(clk,
- struct mcbsp_internal_clk, clk);
- int i;
-
- for (i = 0; i < mclk->n_childs; i++)
- clk_disable(mclk->childs[i]);
-}
-
-static struct mcbsp_internal_clk omap_mcbsp_clks[] = {
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 1,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 2,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 3,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 4,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
- {
- .clk = {
- .name = "mcbsp_clk",
- .id = 5,
- .enable = omap_mcbsp_clk_enable,
- .disable = omap_mcbsp_clk_disable,
- },
- },
-};
-
-#define omap_mcbsp_clks_size ARRAY_SIZE(omap_mcbsp_clks)
-#else
-#define omap_mcbsp_clks_size 0
-static struct mcbsp_internal_clk __initdata *omap_mcbsp_clks;
-static inline void omap_mcbsp_clk_init(struct clk *clk)
-{ }
-#endif
+const char *clk_names[] = { "mcbsp_ick", "mcbsp_fck" };
static void omap2_mcbsp2_mux_setup(void)
{
@@ -156,7 +57,8 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -165,7 +67,8 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
};
#define OMAP2420_MCBSP_PDATA_SZ ARRAY_SIZE(omap2420_mcbsp_pdata)
@@ -183,7 +86,8 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP24XX_MCBSP2_BASE,
@@ -192,7 +96,8 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP3_BASE,
@@ -201,7 +106,8 @@
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP4_BASE,
@@ -210,7 +116,8 @@
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP2430_MCBSP5_BASE,
@@ -219,7 +126,8 @@
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
};
#define OMAP2430_MCBSP_PDATA_SZ ARRAY_SIZE(omap2430_mcbsp_pdata)
@@ -237,7 +145,8 @@
.rx_irq = INT_24XX_MCBSP1_IRQ_RX,
.tx_irq = INT_24XX_MCBSP1_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
@@ -246,7 +155,8 @@
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
.tx_irq = INT_24XX_MCBSP2_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
@@ -255,7 +165,8 @@
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
.tx_irq = INT_24XX_MCBSP3_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP4_BASE,
@@ -264,7 +175,8 @@
.rx_irq = INT_24XX_MCBSP4_IRQ_RX,
.tx_irq = INT_24XX_MCBSP4_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
{
.phys_base = OMAP34XX_MCBSP5_BASE,
@@ -273,7 +185,8 @@
.rx_irq = INT_24XX_MCBSP5_IRQ_RX,
.tx_irq = INT_24XX_MCBSP5_IRQ_TX,
.ops = &omap2_mcbsp_ops,
- .clk_name = "mcbsp_clk",
+ .clk_names = clk_names,
+ .num_clks = 2,
},
};
#define OMAP34XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap34xx_mcbsp_pdata)
@@ -284,14 +197,6 @@
static int __init omap2_mcbsp_init(void)
{
- int i;
-
- for (i = 0; i < omap_mcbsp_clks_size; i++) {
- /* Once we call clk_get inside init, we do not register it */
- omap_mcbsp_clk_init(&omap_mcbsp_clks[i]);
- clk_register(&omap_mcbsp_clks[i].clk);
- }
-
if (cpu_is_omap2420())
omap_mcbsp_count = OMAP2420_MCBSP_PDATA_SZ;
if (cpu_is_omap2430())
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index 43336b9..bf9e961 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -93,9 +93,8 @@
orr r4, r4, #0x40 @ enable self refresh on idle req
mov r5, #0x2000 @ set delay (DPLL relock + DLL relock)
str r4, [r2] @ make it so
- mov r2, #0
nop
- mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt
+ mcr p15, 0, r3, c7, c0, 4 @ wait for interrupt
nop
loop:
subs r5, r5, #0x1 @ awake, wait just a bit
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index ae60363..9fc13a2 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -118,7 +118,8 @@
clockevent_gpt.max_delta_ns =
clockevent_delta2ns(0xffffffff, &clockevent_gpt);
clockevent_gpt.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_gpt);
+ clockevent_delta2ns(3, &clockevent_gpt);
+ /* Timer internal resynch latency. */
clockevent_gpt.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_gpt);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index c1fbd5b..23cfdd5 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -289,7 +289,7 @@
};
static struct platform_device sa11x0mtd_device = {
- .name = "flash",
+ .name = "sa1100-mtd",
.id = -1,
};
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 81d0b87..bc0099d 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -66,7 +66,10 @@
* fault (ie, is old), we can safely ignore any issues.
*/
if (ret && (pte_val(entry) & L_PTE_MT_MASK) != shared_pte_mask) {
- flush_cache_page(vma, address, pte_pfn(entry));
+ unsigned long pfn = pte_pfn(entry);
+ flush_cache_page(vma, address, pfn);
+ outer_flush_range((pfn << PAGE_SHIFT),
+ (pfn << PAGE_SHIFT) + PAGE_SIZE);
pte_val(entry) &= ~L_PTE_MT_MASK;
pte_val(entry) |= shared_pte_mask;
set_pte_at(vma->vm_mm, address, pte, entry);
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ac15c23..208dbb1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -200,14 +200,15 @@
/*
* Register MMC devices. Called from mach-omap1 and mach-omap2 device init.
*/
-int __init omap_mmc_add(int id, unsigned long base, unsigned long size,
- unsigned int irq, struct omap_mmc_platform_data *data)
+int __init omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data)
{
struct platform_device *pdev;
struct resource res[OMAP_MMC_NR_RES];
int ret;
- pdev = platform_device_alloc("mmci-omap", id);
+ pdev = platform_device_alloc(name, id);
if (!pdev)
return -ENOMEM;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index e77373c..47ec77a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -709,6 +709,7 @@
chan->dev_name = dev_name;
chan->callback = callback;
chan->data = data;
+ chan->flags = 0;
#ifndef CONFIG_ARCH_OMAP1
if (cpu_class_is_omap2()) {
@@ -1888,11 +1889,11 @@
status = dma_read(CSR(ch));
}
+ dma_write(status, CSR(ch));
+
if (likely(dma_chan[ch].callback != NULL))
dma_chan[ch].callback(ch, status, dma_chan[ch].data);
- dma_write(status, CSR(ch));
-
return 0;
}
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
index b2062f1..a8e1178 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -339,6 +339,7 @@
#define OMAP3430_REV_ES2_0 0x34301034
#define OMAP3430_REV_ES2_1 0x34302034
#define OMAP3430_REV_ES3_0 0x34303034
+#define OMAP3430_REV_ES3_1 0x34304034
/*
* omap_chip bits
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index eef873d..113c246 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -344,7 +344,8 @@
u8 dma_rx_sync, dma_tx_sync;
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
- char const *clk_name;
+ char const **clk_names;
+ int num_clks;
};
struct omap_mcbsp {
@@ -376,7 +377,8 @@
/* Protect the field .free, while checking if the mcbsp is in use */
spinlock_t lock;
struct omap_mcbsp_platform_data *pdata;
- struct clk *clk;
+ struct clk **clks;
+ int num_clks;
};
extern struct omap_mcbsp **mcbsp_ptr;
extern int omap_mcbsp_count;
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 031250f..73a9e15 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -115,8 +115,9 @@
int nr_controllers);
void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
-int omap_mmc_add(int id, unsigned long base, unsigned long size,
- unsigned int irq, struct omap_mmc_platform_data *data);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data);
#else
static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
@@ -126,8 +127,9 @@
int nr_controllers)
{
}
-static inline int omap_mmc_add(int id, unsigned long base, unsigned long size,
- unsigned int irq, struct omap_mmc_platform_data *data)
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+ unsigned long size, unsigned int irq,
+ struct omap_mmc_platform_data *data)
{
return 0;
}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f2401a8..e5842e3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -214,6 +214,7 @@
int omap_mcbsp_request(unsigned int id)
{
struct omap_mcbsp *mcbsp;
+ int i;
int err;
if (!omap_mcbsp_check_valid_id(id)) {
@@ -225,7 +226,8 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
mcbsp->pdata->ops->request(id);
- clk_enable(mcbsp->clk);
+ for (i = 0; i < mcbsp->num_clks; i++)
+ clk_enable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (!mcbsp->free) {
@@ -276,6 +278,7 @@
void omap_mcbsp_free(unsigned int id)
{
struct omap_mcbsp *mcbsp;
+ int i;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
@@ -286,7 +289,8 @@
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- clk_disable(mcbsp->clk);
+ for (i = mcbsp->num_clks - 1; i >= 0; i--)
+ clk_disable(mcbsp->clks[i]);
spin_lock(&mcbsp->lock);
if (mcbsp->free) {
@@ -872,6 +876,7 @@
struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
struct omap_mcbsp *mcbsp;
int id = pdev->id - 1;
+ int i;
int ret = 0;
if (!pdata) {
@@ -916,14 +921,25 @@
mcbsp->dma_rx_sync = pdata->dma_rx_sync;
mcbsp->dma_tx_sync = pdata->dma_tx_sync;
- if (pdata->clk_name)
- mcbsp->clk = clk_get(&pdev->dev, pdata->clk_name);
- if (IS_ERR(mcbsp->clk)) {
- dev_err(&pdev->dev,
- "Invalid clock configuration for McBSP%d.\n",
- mcbsp->id);
- ret = PTR_ERR(mcbsp->clk);
- goto err_clk;
+ if (pdata->num_clks) {
+ mcbsp->num_clks = pdata->num_clks;
+ mcbsp->clks = kzalloc(mcbsp->num_clks * sizeof(struct clk *),
+ GFP_KERNEL);
+ if (!mcbsp->clks) {
+ ret = -ENOMEM;
+ goto exit;
+ }
+ for (i = 0; i < mcbsp->num_clks; i++) {
+ mcbsp->clks[i] = clk_get(&pdev->dev, pdata->clk_names[i]);
+ if (IS_ERR(mcbsp->clks[i])) {
+ dev_err(&pdev->dev,
+ "Invalid %s configuration for McBSP%d.\n",
+ pdata->clk_names[i], mcbsp->id);
+ ret = PTR_ERR(mcbsp->clks[i]);
+ goto err_clk;
+ }
+ }
+
}
mcbsp->pdata = pdata;
@@ -932,6 +948,9 @@
return 0;
err_clk:
+ while (i--)
+ clk_put(mcbsp->clks[i]);
+ kfree(mcbsp->clks);
iounmap(mcbsp->io_base);
err_ioremap:
mcbsp->free = 0;
@@ -942,6 +961,7 @@
static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
{
struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
+ int i;
platform_set_drvdata(pdev, NULL);
if (mcbsp) {
@@ -950,12 +970,18 @@
mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(mcbsp->id);
- clk_disable(mcbsp->clk);
- clk_put(mcbsp->clk);
+ for (i = mcbsp->num_clks - 1; i >= 0; i--) {
+ clk_disable(mcbsp->clks[i]);
+ clk_put(mcbsp->clks[i]);
+ }
iounmap(mcbsp->io_base);
- mcbsp->clk = NULL;
+ if (mcbsp->num_clks) {
+ kfree(mcbsp->clks);
+ mcbsp->clks = NULL;
+ mcbsp->num_clks = 0;
+ }
mcbsp->free = 0;
mcbsp->dev = NULL;
}
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index a949c4f..8f1f97d 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -169,26 +169,51 @@
help
BF542 Processor Support.
+config BF542M
+ bool "BF542m"
+ help
+ BF542 Processor Support.
+
config BF544
bool "BF544"
help
BF544 Processor Support.
+config BF544M
+ bool "BF544m"
+ help
+ BF544 Processor Support.
+
config BF547
bool "BF547"
help
BF547 Processor Support.
+config BF547M
+ bool "BF547m"
+ help
+ BF547 Processor Support.
+
config BF548
bool "BF548"
help
BF548 Processor Support.
+config BF548M
+ bool "BF548m"
+ help
+ BF548 Processor Support.
+
config BF549
bool "BF549"
help
BF549 Processor Support.
+config BF549M
+ bool "BF549m"
+ help
+ BF549 Processor Support.
+
config BF561
bool "BF561"
help
@@ -224,39 +249,39 @@
config BF_REV_MIN
int
- default 0 if (BF51x || BF52x || BF54x)
+ default 0 if (BF51x || BF52x || (BF54x && !BF54xM))
default 2 if (BF537 || BF536 || BF534)
- default 3 if (BF561 ||BF533 || BF532 || BF531)
+ default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM)
default 4 if (BF538 || BF539)
config BF_REV_MAX
int
- default 2 if (BF51x || BF52x || BF54x)
- default 3 if (BF537 || BF536 || BF534)
+ default 2 if (BF51x || BF52x || (BF54x && !BF54xM))
+ default 3 if (BF537 || BF536 || BF534 || BF54xM)
default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if (BF51x || BF52x || BF54x)
+ default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM))
default BF_REV_0_2 if (BF534 || BF536 || BF537)
- default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
+ default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF51x || BF52x || BF54x)
+ depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_1
bool "0.1"
- depends on (BF52x || BF54x)
+ depends on (BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
- depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
+ depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM))
config BF_REV_0_3
bool "0.3"
- depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
+ depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
config BF_REV_0_4
bool "0.4"
@@ -293,9 +318,14 @@
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
+config BF54xM
+ bool
+ depends on (BF542M || BF544M || BF547M || BF548M || BF549M)
+ default y
+
config BF54x
bool
- depends on (BF542 || BF544 || BF547 || BF548 || BF549)
+ depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM)
default y
config MEM_GENERIC_BOARD
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index e550c8d..d54c828 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -21,57 +21,67 @@
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
# setup the machine name and the machine dependent settings
-machine-$(CONFIG_BF512) := bf518
-machine-$(CONFIG_BF514) := bf518
-machine-$(CONFIG_BF516) := bf518
-machine-$(CONFIG_BF518) := bf518
-machine-$(CONFIG_BF522) := bf527
-machine-$(CONFIG_BF523) := bf527
-machine-$(CONFIG_BF524) := bf527
-machine-$(CONFIG_BF525) := bf527
-machine-$(CONFIG_BF526) := bf527
-machine-$(CONFIG_BF527) := bf527
-machine-$(CONFIG_BF531) := bf533
-machine-$(CONFIG_BF532) := bf533
-machine-$(CONFIG_BF533) := bf533
-machine-$(CONFIG_BF534) := bf537
-machine-$(CONFIG_BF536) := bf537
-machine-$(CONFIG_BF537) := bf537
-machine-$(CONFIG_BF538) := bf538
-machine-$(CONFIG_BF539) := bf538
-machine-$(CONFIG_BF542) := bf548
-machine-$(CONFIG_BF544) := bf548
-machine-$(CONFIG_BF547) := bf548
-machine-$(CONFIG_BF548) := bf548
-machine-$(CONFIG_BF549) := bf548
-machine-$(CONFIG_BF561) := bf561
+machine-$(CONFIG_BF512) := bf518
+machine-$(CONFIG_BF514) := bf518
+machine-$(CONFIG_BF516) := bf518
+machine-$(CONFIG_BF518) := bf518
+machine-$(CONFIG_BF522) := bf527
+machine-$(CONFIG_BF523) := bf527
+machine-$(CONFIG_BF524) := bf527
+machine-$(CONFIG_BF525) := bf527
+machine-$(CONFIG_BF526) := bf527
+machine-$(CONFIG_BF527) := bf527
+machine-$(CONFIG_BF531) := bf533
+machine-$(CONFIG_BF532) := bf533
+machine-$(CONFIG_BF533) := bf533
+machine-$(CONFIG_BF534) := bf537
+machine-$(CONFIG_BF536) := bf537
+machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF538) := bf538
+machine-$(CONFIG_BF539) := bf538
+machine-$(CONFIG_BF542) := bf548
+machine-$(CONFIG_BF542M) := bf548
+machine-$(CONFIG_BF544) := bf548
+machine-$(CONFIG_BF544M) := bf548
+machine-$(CONFIG_BF547) := bf548
+machine-$(CONFIG_BF547M) := bf548
+machine-$(CONFIG_BF548) := bf548
+machine-$(CONFIG_BF548M) := bf548
+machine-$(CONFIG_BF549) := bf548
+machine-$(CONFIG_BF549M) := bf548
+machine-$(CONFIG_BF561) := bf561
MACHINE := $(machine-y)
export MACHINE
-cpu-$(CONFIG_BF512) := bf512
-cpu-$(CONFIG_BF514) := bf514
-cpu-$(CONFIG_BF516) := bf516
-cpu-$(CONFIG_BF518) := bf518
-cpu-$(CONFIG_BF522) := bf522
-cpu-$(CONFIG_BF523) := bf523
-cpu-$(CONFIG_BF524) := bf524
-cpu-$(CONFIG_BF525) := bf525
-cpu-$(CONFIG_BF526) := bf526
-cpu-$(CONFIG_BF527) := bf527
-cpu-$(CONFIG_BF531) := bf531
-cpu-$(CONFIG_BF532) := bf532
-cpu-$(CONFIG_BF533) := bf533
-cpu-$(CONFIG_BF534) := bf534
-cpu-$(CONFIG_BF536) := bf536
-cpu-$(CONFIG_BF537) := bf537
-cpu-$(CONFIG_BF538) := bf538
-cpu-$(CONFIG_BF539) := bf539
-cpu-$(CONFIG_BF542) := bf542
-cpu-$(CONFIG_BF544) := bf544
-cpu-$(CONFIG_BF547) := bf547
-cpu-$(CONFIG_BF548) := bf548
-cpu-$(CONFIG_BF549) := bf549
-cpu-$(CONFIG_BF561) := bf561
+cpu-$(CONFIG_BF512) := bf512
+cpu-$(CONFIG_BF514) := bf514
+cpu-$(CONFIG_BF516) := bf516
+cpu-$(CONFIG_BF518) := bf518
+cpu-$(CONFIG_BF522) := bf522
+cpu-$(CONFIG_BF523) := bf523
+cpu-$(CONFIG_BF524) := bf524
+cpu-$(CONFIG_BF525) := bf525
+cpu-$(CONFIG_BF526) := bf526
+cpu-$(CONFIG_BF527) := bf527
+cpu-$(CONFIG_BF531) := bf531
+cpu-$(CONFIG_BF532) := bf532
+cpu-$(CONFIG_BF533) := bf533
+cpu-$(CONFIG_BF534) := bf534
+cpu-$(CONFIG_BF536) := bf536
+cpu-$(CONFIG_BF537) := bf537
+cpu-$(CONFIG_BF538) := bf538
+cpu-$(CONFIG_BF539) := bf539
+cpu-$(CONFIG_BF542) := bf542
+cpu-$(CONFIG_BF542M) := bf542m
+cpu-$(CONFIG_BF544) := bf544
+cpu-$(CONFIG_BF544M) := bf544m
+cpu-$(CONFIG_BF547) := bf547
+cpu-$(CONFIG_BF547M) := bf547m
+cpu-$(CONFIG_BF548) := bf548
+cpu-$(CONFIG_BF548M) := bf548m
+cpu-$(CONFIG_BF549) := bf549
+cpu-$(CONFIG_BF549M) := bf549m
+cpu-$(CONFIG_BF561) := bf561
rev-$(CONFIG_BF_REV_0_0) := 0.0
rev-$(CONFIG_BF_REV_0_1) := 0.1
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index defb978..4fdb9e0 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc2
+# Fri Jan 9 17:58:41 2009
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -149,6 +150,7 @@
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF51x=y
+CONFIG_MEM_MT48LC32M8A2_75=y
CONFIG_BFIN518F_EZBRD=y
#
@@ -598,7 +600,10 @@
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_BFIN_MAC is not set
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+# CONFIG_BFIN_MAC_RMII is not set
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
@@ -679,7 +684,7 @@
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index 992424f..8e2b855 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -723,7 +723,7 @@
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 21e3c1a..833128b 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -767,7 +767,7 @@
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 0bdf20a..334c94b 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -672,7 +672,7 @@
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 2f747d6..9d73343 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -679,7 +679,7 @@
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 8b0a812..4fb4108 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -722,7 +722,7 @@
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index a1f766b..cb32f56 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -726,7 +726,7 @@
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index cd2da6b..0f869761 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -856,7 +856,7 @@
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b398ca2..042c7ad 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -709,7 +709,7 @@
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
-# CONFIG_BFIN_JTAG_COMM is not set
+CONFIG_BFIN_JTAG_COMM=m
# CONFIG_SERIAL_NONSTANDARD is not set
#
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 9514694..865ed85 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -1,7 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.7
-# Fri Jul 18 18:00:41 2008
+# Linux kernel version: 2.6.28
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -9,7 +8,6 @@
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_BLACKFIN=y
CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
@@ -32,18 +30,16 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -52,26 +48,35 @@
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -82,6 +87,7 @@
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -95,9 +101,11 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
+# CONFIG_FREEZER is not set
#
# Blackfin Processor Options
@@ -106,6 +114,10 @@
#
# Processor and Board Settings
#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
# CONFIG_BF522 is not set
# CONFIG_BF523 is not set
# CONFIG_BF524 is not set
@@ -118,48 +130,32 @@
# CONFIG_BF534 is not set
# CONFIG_BF536 is not set
# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
# CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
# CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
# CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
# CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
# CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
# CONFIG_BF_REV_0_0 is not set
CONFIG_BF_REV_0_1=y
# CONFIG_BF_REV_0_2 is not set
# CONFIG_BF_REV_0_3 is not set
# CONFIG_BF_REV_0_4 is not set
# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
CONFIG_MEM_MT48LC16M16A2TG_75=y
-# CONFIG_BFIN527_EZKIT is not set
-CONFIG_BFIN527_BLUETECHNIX_CM=y
-
-#
-# BF527 Specific Configuration
-#
-
-#
-# Alternative Multiplexing Scheme
-#
-# CONFIG_BF527_SPORT0_PORTF is not set
-CONFIG_BF527_SPORT0_PORTG=y
-CONFIG_BF527_SPORT0_TSCLK_PG10=y
-# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
-CONFIG_BF527_UART1_PORTF=y
-# CONFIG_BF527_UART1_PORTG is not set
-# CONFIG_BF527_NAND_D_PORTF is not set
-CONFIG_BF527_NAND_D_PORTH=y
-
-#
-# Interrupt Priority Assignment
-#
-
-#
-# Priority
-#
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_DMA0_ERROR=7
CONFIG_IRQ_DMAR0_BLK=7
@@ -179,7 +175,6 @@
CONFIG_IRQ_SPORT1_RX=9
CONFIG_IRQ_SPORT1_TX=9
CONFIG_IRQ_TWI=10
-CONFIG_IRQ_SPI=10
CONFIG_IRQ_UART0_RX=10
CONFIG_IRQ_UART0_TX=10
CONFIG_IRQ_UART1_RX=10
@@ -205,6 +200,34 @@
CONFIG_IRQ_WATCH=13
CONFIG_IRQ_PORTF_INTA=13
CONFIG_IRQ_PORTF_INTB=13
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+# CONFIG_BFIN526_EZBRD is not set
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_SPI=10
CONFIG_IRQ_SPI_ERROR=7
CONFIG_IRQ_NFC_ERROR=7
CONFIG_IRQ_HDMA_ERROR=7
@@ -226,7 +249,6 @@
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@@ -240,10 +262,10 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_CYCLES_CLOCKSOURCE is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -277,6 +299,12 @@
CONFIG_CACHELINE_ALIGNED_L1=y
# CONFIG_SYSCALL_TAB_L1 is not set
# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
CONFIG_SELECT_MEMORY_MODEL=y
@@ -285,10 +313,10 @@
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
CONFIG_BFIN_GPTIMERS=y
@@ -334,7 +362,6 @@
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
-# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
@@ -345,25 +372,20 @@
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
-# CONFIG_PM_BFIN_SLEEP is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -376,6 +398,7 @@
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -405,8 +428,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
@@ -415,6 +436,7 @@
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -431,14 +453,14 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
@@ -456,6 +478,8 @@
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
@@ -464,6 +488,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -507,6 +532,7 @@
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -542,10 +568,12 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -558,7 +586,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -579,6 +606,7 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -591,11 +619,14 @@
# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
@@ -604,6 +635,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -616,7 +648,6 @@
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -642,14 +673,15 @@
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
-CONFIG_BFIN_OTP=y
-# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BF5xx_EPPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
+CONFIG_BFIN_DMA_INTERFACE=m
CONFIG_SIMPLE_GPIO=m
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -673,6 +705,8 @@
# CONFIG_SERIAL_BFIN_SPORT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
#
# CAN, the car bus and industrial fieldbus
@@ -680,44 +714,49 @@
# CONFIG_CAN4LINUX is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_BLACKFIN_TWI=m
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_AD5252 is not set
-# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
@@ -726,37 +765,41 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
# CONFIG_SPI_BITBANG is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
@@ -777,6 +820,7 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
@@ -785,6 +829,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
@@ -792,9 +837,12 @@
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -810,21 +858,31 @@
# CONFIG_USBPCWATCHDOG is not set
#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -839,10 +897,6 @@
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@@ -850,6 +904,7 @@
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
@@ -860,40 +915,48 @@
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SOC=y
#
-# Blackfin high speed USB support
+# Blackfin high speed USB Support
#
CONFIG_USB_MUSB_HOST=y
# CONFIG_USB_MUSB_PERIPHERAL is not set
# CONFIG_USB_MUSB_OTG is not set
CONFIG_USB_MUSB_HDRC_HCD=y
CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_MUSB_LOGLEVEL=0
+CONFIG_MUSB_DMA_POLL=y
+# CONFIG_USB_MUSB_DEBUG is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_LIBUSUAL is not set
@@ -901,15 +964,10 @@
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
@@ -918,7 +976,7 @@
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -934,17 +992,13 @@
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -973,51 +1027,59 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_BFIN=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -1059,8 +1121,11 @@
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -1068,13 +1133,12 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1130,7 +1194,6 @@
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -1138,14 +1201,61 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
+CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -1154,7 +1264,7 @@
CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_CPLB_INFO is not set
CONFIG_ACCESS_CHECK=y
@@ -1163,10 +1273,96 @@
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
-# CONFIG_CRYPTO is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
@@ -1174,6 +1370,7 @@
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index f67289a..793581f 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -63,23 +63,23 @@
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
+ unsigned int carry;
- __asm__ ("%0 = %0 + %1;\n\t"
- "CC = AC0;\n\t"
- "if !CC jump 4;\n\t"
- "%0 = %0 + %4;\n\t"
- "%0 = %0 + %2;\n\t"
- "CC = AC0;\n\t"
- "if !CC jump 4;\n\t"
- "%0 = %0 + %4;\n\t"
- "%0 = %0 + %3;\n\t"
- "CC = AC0;\n\t"
- "if !CC jump 4;\n\t"
- "%0 = %0 + %4;\n\t"
- "NOP;\n\t"
- : "=d" (sum)
- : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
- : "CC");
+ __asm__ ("%0 = %0 + %2;\n\t"
+ "CC = AC0;\n\t"
+ "%1 = CC;\n\t"
+ "%0 = %0 + %1;\n\t"
+ "%0 = %0 + %3;\n\t"
+ "CC = AC0;\n\t"
+ "%1 = CC;\n\t"
+ "%0 = %0 + %1;\n\t"
+ "%0 = %0 + %4;\n\t"
+ "CC = AC0;\n\t"
+ "%1 = CC;\n\t"
+ "%0 = %0 + %1;\n\t"
+ : "=d" (sum), "=&d" (carry)
+ : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum)
+ : "CC");
return (sum);
}
diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h
index 0889c3a..c31f91c 100644
--- a/arch/blackfin/include/asm/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -13,29 +13,7 @@
static inline void __delay(unsigned long loops)
{
- if (ANOMALY_05000312) {
- /* Interrupted loads to loop registers -> bad */
- unsigned long tmp;
- __asm__ __volatile__(
- "[--SP] = LC0;"
- "[--SP] = LT0;"
- "[--SP] = LB0;"
- "LSETUP (1f,1f) LC0 = %1;"
- "1: NOP;"
- /* We take advantage of the fact that LC0 is 0 at
- * the end of the loop. Otherwise we'd need some
- * NOPs after the CLI here.
- */
- "CLI %0;"
- "LB0 = [SP++];"
- "LT0 = [SP++];"
- "LC0 = [SP++];"
- "STI %0;"
- : "=d" (tmp)
- : "a" (loops)
- );
- } else
- __asm__ __volatile__ (
+__asm__ __volatile__ (
"LSETUP(1f, 1f) LC0 = %0;"
"1: NOP;"
:
@@ -47,16 +25,15 @@
#include <linux/param.h> /* needed for HZ */
/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
+ * close approximation borrowed from m68knommu to avoid 64-bit math
*/
+
+#define HZSCALE (268435456 / (1000000/HZ))
+
static inline void udelay(unsigned long usecs)
{
extern unsigned long loops_per_jiffy;
- __delay(usecs * loops_per_jiffy / (1000000 / HZ));
+ __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
}
#endif
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 9477d82..d4a082ef 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -27,60 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
-* Number BF537/6/4 BF561 BF533/2/1
-* BF527/5/2
-*
-* GPIO_0 PF0 PF0 PF0
-* GPIO_1 PF1 PF1 PF1
-* GPIO_2 PF2 PF2 PF2
-* GPIO_3 PF3 PF3 PF3
-* GPIO_4 PF4 PF4 PF4
-* GPIO_5 PF5 PF5 PF5
-* GPIO_6 PF6 PF6 PF6
-* GPIO_7 PF7 PF7 PF7
-* GPIO_8 PF8 PF8 PF8
-* GPIO_9 PF9 PF9 PF9
-* GPIO_10 PF10 PF10 PF10
-* GPIO_11 PF11 PF11 PF11
-* GPIO_12 PF12 PF12 PF12
-* GPIO_13 PF13 PF13 PF13
-* GPIO_14 PF14 PF14 PF14
-* GPIO_15 PF15 PF15 PF15
-* GPIO_16 PG0 PF16
-* GPIO_17 PG1 PF17
-* GPIO_18 PG2 PF18
-* GPIO_19 PG3 PF19
-* GPIO_20 PG4 PF20
-* GPIO_21 PG5 PF21
-* GPIO_22 PG6 PF22
-* GPIO_23 PG7 PF23
-* GPIO_24 PG8 PF24
-* GPIO_25 PG9 PF25
-* GPIO_26 PG10 PF26
-* GPIO_27 PG11 PF27
-* GPIO_28 PG12 PF28
-* GPIO_29 PG13 PF29
-* GPIO_30 PG14 PF30
-* GPIO_31 PG15 PF31
-* GPIO_32 PH0 PF32
-* GPIO_33 PH1 PF33
-* GPIO_34 PH2 PF34
-* GPIO_35 PH3 PF35
-* GPIO_36 PH4 PF36
-* GPIO_37 PH5 PF37
-* GPIO_38 PH6 PF38
-* GPIO_39 PH7 PF39
-* GPIO_40 PH8 PF40
-* GPIO_41 PH9 PF41
-* GPIO_42 PH10 PF42
-* GPIO_43 PH11 PF43
-* GPIO_44 PH12 PF44
-* GPIO_45 PH13 PF45
-* GPIO_46 PH14 PF46
-* GPIO_47 PH15 PF47
-*/
-
#ifndef __ARCH_BLACKFIN_GPIO_H__
#define __ARCH_BLACKFIN_GPIO_H__
@@ -295,10 +241,6 @@
int bfin_gpio_get_value(unsigned gpio);
void bfin_gpio_set_value(unsigned gpio, int value);
-#ifndef BF548_FAMILY
-#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value)
-#endif
-
#ifdef CONFIG_GPIOLIB
#include <asm-generic/gpio.h> /* cansleep wrappers */
diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h
index 26ebac6..c8b256d 100644
--- a/arch/blackfin/include/asm/kgdb.h
+++ b/arch/blackfin/include/asm/kgdb.h
@@ -1,32 +1,8 @@
-/*
- * File: include/asm-blackfin/kgdb.h
- * Based on:
- * Author: Sonic Zhang
+/* Blackfin KGDB header
*
- * Created:
- * Description:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
- *
- * Modified:
- * Copyright 2005-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BLACKFIN_KGDB_H__
@@ -37,17 +13,18 @@
/* gdb locks */
#define KGDB_MAX_NO_CPUS 8
-/************************************************************************/
-/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
-/* at least NUMREGBYTES*2 are needed for register packets */
-/* Longer buffer is needed to list all threads */
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers.
+ * At least NUMREGBYTES*2 are needed for register packets.
+ * Longer buffer is needed to list all threads.
+ */
#define BUFMAX 2048
/*
- * Note that this register image is different from
- * the register image that Linux produces at interrupt time.
- *
- * Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Note that this register image is different from
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
*/
enum regnames {
/* Core Registers */
@@ -104,14 +81,14 @@
BFIN_RETX,
BFIN_RETN,
BFIN_RETE,
-
+
/* Pseudo Registers */
BFIN_PC,
BFIN_CC,
BFIN_EXTRA1, /* Address of .text section. */
BFIN_EXTRA2, /* Address of .data section. */
BFIN_EXTRA3, /* Address of .bss section. */
- BFIN_FDPIC_EXEC,
+ BFIN_FDPIC_EXEC,
BFIN_FDPIC_INTERP,
/* MMRs */
@@ -126,7 +103,7 @@
static inline void arch_kgdb_breakpoint(void)
{
- asm(" EXCPT 2;");
+ asm("EXCPT 2;");
}
#define BREAK_INSTR_SIZE 2
#define CACHE_FLUSH_IS_SAFE 1
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 255a931..61f7487 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -115,7 +115,7 @@
#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
/* Enable SCLK Out */
-#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
#else
#define mem_SDRRC CONFIG_MEM_SDRRC
#define mem_SDGCTL CONFIG_MEM_SDGCTL
diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h
index bd8d4a7..a671427 100644
--- a/arch/blackfin/include/asm/pda.h
+++ b/arch/blackfin/include/asm/pda.h
@@ -59,6 +59,7 @@
unsigned long icplb_fault_addr;
unsigned long retx;
unsigned long seqstat;
+ unsigned int __nmi_count; /* number of times NMI asserted on this CPU */
};
extern struct blackfin_pda cpu_pda[];
diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h
index 4856d62..ae1e363 100644
--- a/arch/blackfin/include/asm/reboot.h
+++ b/arch/blackfin/include/asm/reboot.h
@@ -15,6 +15,6 @@
extern void native_machine_power_off(void);
/* common reboot workarounds */
-extern void bfin_gpio_reset_spi0_ssel1(void);
+extern void bfin_reset_boot_spi_cs(unsigned short pin);
#endif
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 38a2333..4a92a86 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,6 +15,8 @@
obj-y += time.o
endif
+CFLAGS_kgdb_test.o := -mlong-calls -O0
+
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 07e02c0..8531693 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -249,6 +249,13 @@
spin_lock_irqsave(&mdma_lock, flags);
+ /* Force a sync in case a previous config reset on this channel
+ * occurred. This is needed so subsequent writes to DMA registers
+ * are not spuriously lost/corrupted. Do it under irq lock and
+ * without the anomaly version (because we are atomic already).
+ */
+ __builtin_bfin_ssync();
+
if (bfin_read_MDMA_S0_CONFIG())
while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE))
continue;
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 4c14331..51dac55 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -27,59 +27,6 @@
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
-* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2
-*
-* GPIO_0 PF0 PF0 PF0 PA0...PJ13
-* GPIO_1 PF1 PF1 PF1
-* GPIO_2 PF2 PF2 PF2
-* GPIO_3 PF3 PF3 PF3
-* GPIO_4 PF4 PF4 PF4
-* GPIO_5 PF5 PF5 PF5
-* GPIO_6 PF6 PF6 PF6
-* GPIO_7 PF7 PF7 PF7
-* GPIO_8 PF8 PF8 PF8
-* GPIO_9 PF9 PF9 PF9
-* GPIO_10 PF10 PF10 PF10
-* GPIO_11 PF11 PF11 PF11
-* GPIO_12 PF12 PF12 PF12
-* GPIO_13 PF13 PF13 PF13
-* GPIO_14 PF14 PF14 PF14
-* GPIO_15 PF15 PF15 PF15
-* GPIO_16 PG0 PF16
-* GPIO_17 PG1 PF17
-* GPIO_18 PG2 PF18
-* GPIO_19 PG3 PF19
-* GPIO_20 PG4 PF20
-* GPIO_21 PG5 PF21
-* GPIO_22 PG6 PF22
-* GPIO_23 PG7 PF23
-* GPIO_24 PG8 PF24
-* GPIO_25 PG9 PF25
-* GPIO_26 PG10 PF26
-* GPIO_27 PG11 PF27
-* GPIO_28 PG12 PF28
-* GPIO_29 PG13 PF29
-* GPIO_30 PG14 PF30
-* GPIO_31 PG15 PF31
-* GPIO_32 PH0 PF32
-* GPIO_33 PH1 PF33
-* GPIO_34 PH2 PF34
-* GPIO_35 PH3 PF35
-* GPIO_36 PH4 PF36
-* GPIO_37 PH5 PF37
-* GPIO_38 PH6 PF38
-* GPIO_39 PH7 PF39
-* GPIO_40 PH8 PF40
-* GPIO_41 PH9 PF41
-* GPIO_42 PH10 PF42
-* GPIO_43 PH11 PF43
-* GPIO_44 PH12 PF44
-* GPIO_45 PH13 PF45
-* GPIO_46 PH14 PF46
-* GPIO_47 PH15 PF47
-*/
-
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/err.h>
@@ -119,51 +66,18 @@
#define AWA_DUMMY_READ(...) do { } while (0)
#endif
+static struct gpio_port_t * const gpio_array[] = {
#if defined(BF533_FAMILY) || defined(BF538_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
(struct gpio_port_t *) FIO_FLAG_D,
-};
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
-static struct gpio_port_t *gpio_bankb[] = {
+#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
(struct gpio_port_t *) PORTFIO,
(struct gpio_port_t *) PORTGIO,
(struct gpio_port_t *) PORTHIO,
-};
-
-static unsigned short *port_fer[] = {
- (unsigned short *) PORTF_FER,
- (unsigned short *) PORTG_FER,
- (unsigned short *) PORTH_FER,
-};
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned short *port_mux[] = {
- (unsigned short *) PORTF_MUX,
- (unsigned short *) PORTG_MUX,
- (unsigned short *) PORTH_MUX,
-};
-
-static const
-u8 pmux_offset[][16] =
- {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
- { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
- { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
- };
-#endif
-
-#ifdef BF561_FAMILY
-static struct gpio_port_t *gpio_bankb[] = {
+#elif defined(BF561_FAMILY)
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
-};
-#endif
-
-#ifdef BF548_FAMILY
-static struct gpio_port_t *gpio_array[] = {
+#elif defined(BF548_FAMILY)
(struct gpio_port_t *)PORTA_FER,
(struct gpio_port_t *)PORTB_FER,
(struct gpio_port_t *)PORTC_FER,
@@ -174,7 +88,39 @@
(struct gpio_port_t *)PORTH_FER,
(struct gpio_port_t *)PORTI_FER,
(struct gpio_port_t *)PORTJ_FER,
+#else
+# error no gpio arrays defined
+#endif
};
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+static unsigned short * const port_fer[] = {
+ (unsigned short *) PORTF_FER,
+ (unsigned short *) PORTG_FER,
+ (unsigned short *) PORTH_FER,
+};
+
+# if !defined(BF537_FAMILY)
+static unsigned short * const port_mux[] = {
+ (unsigned short *) PORTF_MUX,
+ (unsigned short *) PORTG_MUX,
+ (unsigned short *) PORTH_MUX,
+};
+
+static const
+u8 pmux_offset[][16] = {
+# if defined(BF527_FAMILY)
+ { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */
+ { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */
+# elif defined(BF518_FAMILY)
+ { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */
+ { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */
+ { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */
+# endif
+};
+# endif
+
#endif
static unsigned short reserved_gpio_map[GPIO_BANK_NUM];
@@ -188,35 +134,9 @@
} str_ident[MAX_RESOURCES];
#if defined(CONFIG_PM)
-#if defined(CONFIG_BF54x)
static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-#else
-static unsigned short wakeup_map[GPIO_BANK_NUM];
-static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
-static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM];
-
-#ifdef BF533_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB};
#endif
-#ifdef BF537_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX};
-#endif
-
-#ifdef BF538_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB};
-#endif
-
-#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
-static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
-#endif
-
-#ifdef BF561_FAMILY
-static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
-#endif
-#endif
-#endif /* CONFIG_PM */
-
inline int check_gpio(unsigned gpio)
{
#if defined(BF548_FAMILY)
@@ -330,9 +250,10 @@
{.res = P_SPI0_SSEL3, .offset = 0},
};
-static void portmux_setup(unsigned short per, unsigned short function)
+static void portmux_setup(unsigned short per)
{
u16 y, offset, muxreg;
+ u16 function = P_FUNCT2MUX(per);
for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) {
if (port_mux_lut[y].res == per) {
@@ -353,30 +274,33 @@
}
}
#elif defined(BF548_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
{
u32 pmux;
+ u16 ident = P_IDENT(per);
+ u16 function = P_FUNCT2MUX(per);
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
- pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
- pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+ pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
- gpio_array[gpio_bank(portno)]->port_mux = pmux;
+ gpio_array[gpio_bank(ident)]->port_mux = pmux;
}
-inline u16 get_portmux(unsigned short portno)
+inline u16 get_portmux(unsigned short per)
{
u32 pmux;
+ u16 ident = P_IDENT(per);
- pmux = gpio_array[gpio_bank(portno)]->port_mux;
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
- return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+ return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
}
#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
-inline void portmux_setup(unsigned short portno, unsigned short function)
+inline void portmux_setup(unsigned short per)
{
- u16 pmux, ident = P_IDENT(portno);
+ u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per);
u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)];
pmux = *port_mux[gpio_bank(ident)];
@@ -424,90 +348,71 @@
unsigned long flags; \
local_irq_save_hw(flags); \
if (arg) \
- gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
+ gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \
else \
- gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
+ gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \
AWA_DUMMY_READ(name); \
local_irq_restore_hw(flags); \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
-SET_GPIO(dir)
-SET_GPIO(inen)
-SET_GPIO(polar)
-SET_GPIO(edge)
-SET_GPIO(both)
+SET_GPIO(dir) /* set_gpio_dir() */
+SET_GPIO(inen) /* set_gpio_inen() */
+SET_GPIO(polar) /* set_gpio_polar() */
+SET_GPIO(edge) /* set_gpio_edge() */
+SET_GPIO(both) /* set_gpio_both() */
-#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_SC(name) \
void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
- local_irq_save_hw(flags); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save_hw(flags); \
if (arg) \
- gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
+ gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
else \
- gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
- AWA_DUMMY_READ(name); \
- local_irq_restore_hw(flags); \
+ gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore_hw(flags); \
+ } \
} \
EXPORT_SYMBOL(set_gpio_ ## name);
-#else
-#define SET_GPIO_SC(name) \
-void set_gpio_ ## name(unsigned gpio, unsigned short arg) \
-{ \
- if (arg) \
- gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \
- else \
- gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \
-} \
-EXPORT_SYMBOL(set_gpio_ ## name);
-#endif
SET_GPIO_SC(maska)
SET_GPIO_SC(maskb)
SET_GPIO_SC(data)
-#if ANOMALY_05000311 || ANOMALY_05000323
void set_gpio_toggle(unsigned gpio)
{
unsigned long flags;
- local_irq_save_hw(flags);
- gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
- AWA_DUMMY_READ(toggle);
- local_irq_restore_hw(flags);
+ if (ANOMALY_05000311 || ANOMALY_05000323)
+ local_irq_save_hw(flags);
+ gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
+ if (ANOMALY_05000311 || ANOMALY_05000323) {
+ AWA_DUMMY_READ(toggle);
+ local_irq_restore_hw(flags);
+ }
}
-#else
-void set_gpio_toggle(unsigned gpio)
-{
- gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-}
-#endif
EXPORT_SYMBOL(set_gpio_toggle);
/*Set current PORT date (16-bit word)*/
-#if ANOMALY_05000311 || ANOMALY_05000323
#define SET_GPIO_P(name) \
void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
{ \
unsigned long flags; \
- local_irq_save_hw(flags); \
- gpio_bankb[gpio_bank(gpio)]->name = arg; \
- AWA_DUMMY_READ(name); \
- local_irq_restore_hw(flags); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save_hw(flags); \
+ gpio_array[gpio_bank(gpio)]->name = arg; \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore_hw(flags); \
+ } \
} \
EXPORT_SYMBOL(set_gpiop_ ## name);
-#else
-#define SET_GPIO_P(name) \
-void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \
-{ \
- gpio_bankb[gpio_bank(gpio)]->name = arg; \
-} \
-EXPORT_SYMBOL(set_gpiop_ ## name);
-#endif
SET_GPIO_P(data)
SET_GPIO_P(dir)
@@ -519,27 +424,21 @@
SET_GPIO_P(maskb)
/* Get a specific bit */
-#if ANOMALY_05000311 || ANOMALY_05000323
#define GET_GPIO(name) \
unsigned short get_gpio_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
- local_irq_save_hw(flags); \
- ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
- AWA_DUMMY_READ(name); \
- local_irq_restore_hw(flags); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save_hw(flags); \
+ ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore_hw(flags); \
+ } \
return ret; \
} \
EXPORT_SYMBOL(get_gpio_ ## name);
-#else
-#define GET_GPIO(name) \
-unsigned short get_gpio_ ## name(unsigned gpio) \
-{ \
- return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \
-} \
-EXPORT_SYMBOL(get_gpio_ ## name);
-#endif
GET_GPIO(data)
GET_GPIO(dir)
@@ -552,27 +451,21 @@
/*Get current PORT date (16-bit word)*/
-#if ANOMALY_05000311 || ANOMALY_05000323
#define GET_GPIO_P(name) \
unsigned short get_gpiop_ ## name(unsigned gpio) \
{ \
unsigned long flags; \
unsigned short ret; \
- local_irq_save_hw(flags); \
- ret = (gpio_bankb[gpio_bank(gpio)]->name); \
- AWA_DUMMY_READ(name); \
- local_irq_restore_hw(flags); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) \
+ local_irq_save_hw(flags); \
+ ret = (gpio_array[gpio_bank(gpio)]->name); \
+ if (ANOMALY_05000311 || ANOMALY_05000323) { \
+ AWA_DUMMY_READ(name); \
+ local_irq_restore_hw(flags); \
+ } \
return ret; \
} \
EXPORT_SYMBOL(get_gpiop_ ## name);
-#else
-#define GET_GPIO_P(name) \
-unsigned short get_gpiop_ ## name(unsigned gpio) \
-{ \
- return (gpio_bankb[gpio_bank(gpio)]->name);\
-} \
-EXPORT_SYMBOL(get_gpiop_ ## name);
-#endif
GET_GPIO_P(data)
GET_GPIO_P(dir)
@@ -585,6 +478,26 @@
#ifdef CONFIG_PM
+
+static unsigned short wakeup_map[GPIO_BANK_NUM];
+static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
+
+static const unsigned int sic_iwr_irqs[] = {
+#if defined(BF533_FAMILY)
+ IRQ_PROG_INTB
+#elif defined(BF537_FAMILY)
+ IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX
+#elif defined(BF538_FAMILY)
+ IRQ_PORTF_INTB
+#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
+ IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB
+#elif defined(BF561_FAMILY)
+ IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB
+#else
+# error no SIC_IWR defined
+#endif
+};
+
/***********************************************************
*
* FUNCTIONS: Blackfin PM Setup API
@@ -669,18 +582,18 @@
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
- gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb;
- gpio_bankb[bank]->maskb = 0;
+ gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb;
+ gpio_array[bank]->maskb = 0;
if (mask) {
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
- gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
- gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
- gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
- gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
- gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
+ gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+ gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+ gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
+ gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
+ gpio_bank_saved[bank].both = gpio_array[bank]->both;
gpio_bank_saved[bank].reserved =
reserved_gpio_map[bank];
@@ -700,7 +613,7 @@
}
bfin_internal_set_wake(sic_iwr_irqs[bank], 1);
- gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)];
+ gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)];
}
}
@@ -721,18 +634,18 @@
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
- gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
- gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
- gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
- gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
- gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
+ gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
+ gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+ gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
+ gpio_array[bank]->both = gpio_bank_saved[bank].both;
reserved_gpio_map[bank] =
gpio_bank_saved[bank].reserved;
bfin_internal_set_wake(sic_iwr_irqs[bank], 0);
}
- gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb;
+ gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb;
}
AWA_DUMMY_READ(maskb);
}
@@ -745,21 +658,21 @@
bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
- gpio_bank_saved[bank].fer = *port_fer[bank];
+ gpio_bank_saved[bank].fer = *port_fer[bank];
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
- gpio_bank_saved[bank].mux = *port_mux[bank];
+ gpio_bank_saved[bank].mux = *port_mux[bank];
#else
- if (bank == 0)
- gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
+ if (bank == 0)
+ gpio_bank_saved[bank].mux = bfin_read_PORT_MUX();
#endif
#endif
- gpio_bank_saved[bank].data = gpio_bankb[bank]->data;
- gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
- gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
- gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir;
- gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge;
- gpio_bank_saved[bank].both = gpio_bankb[bank]->both;
- gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska;
+ gpio_bank_saved[bank].data = gpio_array[bank]->data;
+ gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+ gpio_bank_saved[bank].polar = gpio_array[bank]->polar;
+ gpio_bank_saved[bank].dir = gpio_array[bank]->dir;
+ gpio_bank_saved[bank].edge = gpio_array[bank]->edge;
+ gpio_bank_saved[bank].both = gpio_array[bank]->both;
+ gpio_bank_saved[bank].maska = gpio_array[bank]->maska;
}
AWA_DUMMY_READ(maska);
@@ -770,27 +683,27 @@
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
- bank = gpio_bank(i);
+ bank = gpio_bank(i);
#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
- *port_mux[bank] = gpio_bank_saved[bank].mux;
+ *port_mux[bank] = gpio_bank_saved[bank].mux;
#else
- if (bank == 0)
- bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+ if (bank == 0)
+ bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
#endif
- *port_fer[bank] = gpio_bank_saved[bank].fer;
+ *port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
- gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
- gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir;
- gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
- gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge;
- gpio_bankb[bank]->both = gpio_bank_saved[bank].both;
+ gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_array[bank]->dir = gpio_bank_saved[bank].dir;
+ gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
+ gpio_array[bank]->edge = gpio_bank_saved[bank].edge;
+ gpio_array[bank]->both = gpio_bank_saved[bank].both;
- gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
- | gpio_bank_saved[bank].dir;
+ gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+ | gpio_bank_saved[bank].dir;
- gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+ gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
}
AWA_DUMMY_READ(maska);
}
@@ -817,12 +730,12 @@
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
- gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
- gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
- gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
- gpio_bank_saved[bank].data = gpio_array[bank]->port_data;
- gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen;
- gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set;
+ gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
+ gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
+ gpio_bank_saved[bank].data = gpio_array[bank]->data;
+ gpio_bank_saved[bank].data = gpio_array[bank]->data;
+ gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
+ gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
}
}
@@ -831,21 +744,21 @@
int i, bank;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
- bank = gpio_bank(i);
+ bank = gpio_bank(i);
- gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
- gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
- gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen;
- gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir;
- gpio_array[bank]->port_set = gpio_bank_saved[bank].data
- | gpio_bank_saved[bank].dir;
+ gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
+ gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
+ gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
+ gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
+ gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+ | gpio_bank_saved[bank].dir;
}
}
#endif
unsigned short get_gpio_dir(unsigned gpio)
{
- return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio)));
+ return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
}
EXPORT_SYMBOL(get_gpio_dir);
@@ -905,9 +818,7 @@
*/
#ifdef BF548_FAMILY
- u16 funct = get_portmux(ident);
-
- if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+ if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
#else
if (!(per & P_MAYSHARE)) {
#endif
@@ -931,11 +842,7 @@
anyway:
reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
-#ifdef BF548_FAMILY
- portmux_setup(ident, P_FUNCT2MUX(per));
-#else
- portmux_setup(per, P_FUNCT2MUX(per));
-#endif
+ portmux_setup(per);
port_setup(ident, PERIPHERAL_USAGE);
local_irq_restore_hw(flags);
@@ -977,9 +884,6 @@
if (!(per & P_DEFINED))
return;
- if (check_gpio(ident) < 0)
- return;
-
local_irq_save_hw(flags);
if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
@@ -1056,9 +960,15 @@
local_irq_restore_hw(flags);
return -EBUSY;
}
- if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))
+ if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
" (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
+ }
+#ifndef BF548_FAMILY
+ else { /* Reset POLAR setting when acquiring a gpio for the first time */
+ set_gpio_polar(gpio, 0);
+ }
+#endif
reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
set_label(gpio, label);
@@ -1078,6 +988,8 @@
if (check_gpio(gpio) < 0)
return;
+ might_sleep();
+
local_irq_save_hw(flags);
if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
@@ -1158,92 +1070,15 @@
local_irq_restore_hw(flags);
}
-
+static inline void __bfin_gpio_direction_input(unsigned gpio)
+{
#ifdef BF548_FAMILY
-int bfin_gpio_direction_input(unsigned gpio)
-{
- unsigned long flags;
-
- if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save_hw(flags);
- gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
- local_irq_restore_hw(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_input);
-
-int bfin_gpio_direction_output(unsigned gpio, int value)
-{
- unsigned long flags;
-
- if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
- gpio_error(gpio);
- return -EINVAL;
- }
-
- local_irq_save_hw(flags);
- gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
- gpio_set_value(gpio, value);
- gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
- local_irq_restore_hw(flags);
-
- return 0;
-}
-EXPORT_SYMBOL(bfin_gpio_direction_output);
-
-void bfin_gpio_set_value(unsigned gpio, int arg)
-{
- if (arg)
- gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
-}
-EXPORT_SYMBOL(bfin_gpio_set_value);
-
-int bfin_gpio_get_value(unsigned gpio)
-{
- return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(bfin_gpio_get_value);
-
-void bfin_gpio_irq_prepare(unsigned gpio)
-{
- unsigned long flags;
-
- port_setup(gpio, GPIO_USAGE);
-
- local_irq_save_hw(flags);
- gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
- gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
- local_irq_restore_hw(flags);
-}
-
+ gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
#else
-
-int bfin_gpio_get_value(unsigned gpio)
-{
- unsigned long flags;
- int ret;
-
- if (unlikely(get_gpio_edge(gpio))) {
- local_irq_save_hw(flags);
- set_gpio_edge(gpio, 0);
- ret = get_gpio_data(gpio);
- set_gpio_edge(gpio, 1);
- local_irq_restore_hw(flags);
-
- return ret;
- } else
- return get_gpio_data(gpio);
+ gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
+#endif
+ gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
}
-EXPORT_SYMBOL(bfin_gpio_get_value);
-
int bfin_gpio_direction_input(unsigned gpio)
{
@@ -1255,8 +1090,7 @@
}
local_irq_save_hw(flags);
- gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
- gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+ __bfin_gpio_direction_input(gpio);
AWA_DUMMY_READ(inen);
local_irq_restore_hw(flags);
@@ -1264,6 +1098,30 @@
}
EXPORT_SYMBOL(bfin_gpio_direction_input);
+void bfin_gpio_irq_prepare(unsigned gpio)
+{
+#ifdef BF548_FAMILY
+ unsigned long flags;
+#endif
+
+ port_setup(gpio, GPIO_USAGE);
+
+#ifdef BF548_FAMILY
+ local_irq_save_hw(flags);
+ __bfin_gpio_direction_input(gpio);
+ local_irq_restore_hw(flags);
+#endif
+}
+
+void bfin_gpio_set_value(unsigned gpio, int arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+}
+EXPORT_SYMBOL(bfin_gpio_set_value);
+
int bfin_gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
@@ -1274,14 +1132,15 @@
}
local_irq_save_hw(flags);
- gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
- if (value)
- gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
- else
- gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+ gpio_set_value(gpio, value);
+#ifdef BF548_FAMILY
+ gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
+#else
+ gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
+#endif
- gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
AWA_DUMMY_READ(dir);
local_irq_restore_hw(flags);
@@ -1289,6 +1148,27 @@
}
EXPORT_SYMBOL(bfin_gpio_direction_output);
+int bfin_gpio_get_value(unsigned gpio)
+{
+#ifdef BF548_FAMILY
+ return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
+#else
+ unsigned long flags;
+
+ if (unlikely(get_gpio_edge(gpio))) {
+ int ret;
+ local_irq_save_hw(flags);
+ set_gpio_edge(gpio, 0);
+ ret = get_gpio_data(gpio);
+ set_gpio_edge(gpio, 1);
+ local_irq_restore_hw(flags);
+ return ret;
+ } else
+ return get_gpio_data(gpio);
+#endif
+}
+EXPORT_SYMBOL(bfin_gpio_get_value);
+
/* If we are booting from SPI and our board lacks a strong enough pull up,
* the core can reset and execute the bootrom faster than the resistor can
* pull the signal logically high. To work around this (common) error in
@@ -1299,23 +1179,15 @@
* lives here as we need to force all the GPIO states w/out going through
* BUG() checks and such.
*/
-void bfin_gpio_reset_spi0_ssel1(void)
+void bfin_reset_boot_spi_cs(unsigned short pin)
{
- u16 gpio = P_IDENT(P_SPI0_SSEL1);
-
+ unsigned short gpio = P_IDENT(pin);
port_setup(gpio, GPIO_USAGE);
- gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
AWA_DUMMY_READ(data_set);
udelay(1);
}
-void bfin_gpio_irq_prepare(unsigned gpio)
-{
- port_setup(gpio, GPIO_USAGE);
-}
-
-#endif /*BF548_FAMILY */
-
#if defined(CONFIG_PROC_FS)
static int gpio_proc_read(char *buf, char **start, off_t offset,
int len, int *unused_i, void *unused_v)
@@ -1369,11 +1241,7 @@
void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
{
-#ifdef BF548_FAMILY
return bfin_gpio_set_value(gpio, value);
-#else
- return set_gpio_data(gpio, value);
-#endif
}
int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio)
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index bdb9584..3e329a6 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -63,10 +63,8 @@
dcplb_tbl[cpu][i_d].addr = 0;
dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
-#if 0
icplb_tbl[cpu][i_i].addr = 0;
- icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB;
-#endif
+ icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB;
/* Cover kernel memory with 4M pages. */
addr = 0;
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
index 376249a..8cbb47c 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c
@@ -163,12 +163,14 @@
nr_icplb_supv_miss[cpu]++;
base = 0;
- for (idx = 0; idx < icplb_nr_bounds; idx++) {
+ idx = 0;
+ do {
eaddr = icplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
- }
+ } while (++idx < icplb_nr_bounds);
+
if (unlikely(idx == icplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;
@@ -208,12 +210,14 @@
nr_dcplb_supv_miss[cpu]++;
base = 0;
- for (idx = 0; idx < dcplb_nr_bounds; idx++) {
+ idx = 0;
+ do {
eaddr = dcplb_bounds[idx].eaddr;
if (addr < eaddr)
break;
base = eaddr;
- }
+ } while (++idx < dcplb_nr_bounds);
+
if (unlikely(idx == dcplb_nr_bounds))
return CPLB_NO_ADDR_MATCH;
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index ab8209c..75724ee 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/trace.h>
+#include <asm/pda.h>
static atomic_t irq_err_count;
static spinlock_t irq_controller_lock;
@@ -91,8 +92,13 @@
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS)
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "NMI: ");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", cpu_pda[j].__nmi_count);
+ seq_printf(p, " CORE Non Maskable Interrupt\n");
seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
+ }
return 0;
}
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index eeee8cb..53d08de 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -20,8 +20,8 @@
* reset while the Core B bit (on dual core parts) is cleared by
* the core reset.
*/
-__attribute__((l1_text))
-static void _bfin_reset(void)
+__attribute__ ((__l1_text__, __noreturn__))
+static void bfin_reset(void)
{
/* Wait for completion of "system" events such as cache line
* line fills so that we avoid infinite stalls later on as
@@ -30,7 +30,11 @@
*/
__builtin_bfin_ssync();
- while (1) {
+ /* The bootrom checks to see how it was reset and will
+ * automatically perform a software reset for us when
+ * it starts executing after the core reset.
+ */
+ if (ANOMALY_05000353 || ANOMALY_05000386) {
/* Initiate System software reset. */
bfin_write_SWRST(0x7);
@@ -50,6 +54,11 @@
/* Clear System software reset */
bfin_write_SWRST(0);
+ /* The BF526 ROM will crash during reset */
+#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
+ bfin_read_SWRST();
+#endif
+
/* Wait for the SWRST write to complete. Cannot rely on SSYNC
* though as the System state is all reset now.
*/
@@ -60,22 +69,11 @@
: "a" (15 * 1)
: "LC1", "LB1", "LT1"
);
+ }
+ while (1)
/* Issue core reset */
asm("raise 1");
- }
-}
-
-static void bfin_reset(void)
-{
- if (ANOMALY_05000353 || ANOMALY_05000386)
- _bfin_reset();
- else
- /* the bootrom checks to see how it was reset and will
- * automatically perform a software reset for us when
- * it starts executing boot
- */
- asm("raise 1;");
}
__attribute__((weak))
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index b2a8113..e5c1162 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -60,7 +60,7 @@
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
#define BFIN_MEMMAP_RAM 1
#define BFIN_MEMMAP_RESERVED 2
-struct bfin_memmap {
+static struct bfin_memmap {
int nr_map;
struct bfin_memmap_entry {
unsigned long long addr; /* start of memory segment */
@@ -824,7 +824,15 @@
flash_probe();
#endif
+ printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
+
+ /* Newer parts mirror SWRST bits in SYSCR */
+#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \
+ defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
+#else
+ _bfin_swrst = bfin_read_SYSCR();
+#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT);
@@ -853,7 +861,7 @@
else if (_bfin_swrst & RESET_SOFTWARE)
printk(KERN_NOTICE "Reset caused by Software reset\n");
- printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n");
+ printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n");
if (bfin_compiled_revid() == 0xffff)
printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
else if (bfin_compiled_revid() == -1)
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 5b0667d..ffe7fb5 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -673,6 +673,14 @@
verbose_printk("RTI");
else if (opcode == 0x0012)
verbose_printk("RTX");
+ else if (opcode == 0x0013)
+ verbose_printk("RTN");
+ else if (opcode == 0x0014)
+ verbose_printk("RTE");
+ else if (opcode == 0x0025)
+ verbose_printk("EMUEXCPT");
+ else if (opcode == 0x0040 && opcode <= 0x0047)
+ verbose_printk("STI R%i", opcode & 7);
else if (opcode >= 0x0050 && opcode <= 0x0057)
verbose_printk("JUMP (P%i)", opcode & 7);
else if (opcode >= 0x0060 && opcode <= 0x0067)
@@ -681,6 +689,10 @@
verbose_printk("CALL (PC+P%i)", opcode & 7);
else if (opcode >= 0x0080 && opcode <= 0x0087)
verbose_printk("JUMP (PC+P%i)", opcode & 7);
+ else if (opcode >= 0x0090 && opcode <= 0x009F)
+ verbose_printk("RAISE 0x%x", opcode & 0xF);
+ else if (opcode >= 0x00A0 && opcode <= 0x00AF)
+ verbose_printk("EXCPT 0x%x", opcode & 0xF);
else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
verbose_printk("IF !CC JUMP");
else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
@@ -820,11 +832,8 @@
decode_address(buf, (unsigned int)stack);
printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
- addr = (unsigned int *)((unsigned int)stack & ~0x3F);
-
/* First thing is to look for a frame pointer */
- for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
- addr < endstack; addr++, i++) {
+ for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) {
if (*addr & 0x1)
continue;
ins_addr = (unsigned short *)*addr;
@@ -834,7 +843,8 @@
if (fp) {
/* Let's check to see if it is a frame pointer */
- while (fp >= (addr - 1) && fp < endstack && fp)
+ while (fp >= (addr - 1) && fp < endstack
+ && fp && ((unsigned int) fp & 0x3) == 0)
fp = (unsigned int *)*fp;
if (fp == 0 || fp == endstack) {
fp = addr - 1;
@@ -1052,8 +1062,9 @@
char buf [150];
struct irqaction *action;
unsigned int i;
- unsigned long flags;
+ unsigned long flags = 0;
unsigned int cpu = smp_processor_id();
+ unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic();
verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted());
verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
@@ -1073,17 +1084,22 @@
}
verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n",
fp->seqstat & SEQSTAT_EXCAUSE);
- for (i = 6; i <= 15 ; i++) {
+ for (i = 2; i <= 15 ; i++) {
if (fp->ipend & (1 << i)) {
- decode_address(buf, bfin_read32(EVT0 + 4*i));
- verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
+ if (i != 4) {
+ decode_address(buf, bfin_read32(EVT0 + 4*i));
+ verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf);
+ } else
+ verbose_printk(KERN_NOTICE " interrupts disabled\n");
}
}
/* if no interrupts are going off, don't print this out */
if (fp->ipend & ~0x3F) {
for (i = 0; i < (NR_IRQS - 1); i++) {
- spin_lock_irqsave(&irq_desc[i].lock, flags);
+ if (!in_atomic)
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+
action = irq_desc[i].action;
if (!action)
goto unlock;
@@ -1096,7 +1112,8 @@
}
verbose_printk("\n");
unlock:
- spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ if (!in_atomic)
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
}
}
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 15f1351..0e17534 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -46,6 +46,7 @@
#include <asm/dpmc.h>
#include <asm/bfin_sdh.h>
#include <linux/spi/ad7877.h>
+#include <net/dsa.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -104,8 +105,31 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+static struct dsa_platform_data ksz8893m_switch_data = {
+ .mii_bus = &bfin_mii_bus.dev,
+ .netdev = &bfin_mac_device.dev,
+ .port_names[0] = NULL,
+ .port_names[1] = "eth%d",
+ .port_names[2] = "eth%d",
+ .port_names[3] = "cpu",
+};
+
+static struct platform_device ksz8893m_switch_device = {
+ .name = "dsa",
+ .id = 0,
+ .num_resources = 0,
+ .dev.platform_data = &ksz8893m_switch_data,
};
#endif
@@ -147,6 +171,15 @@
};
#endif
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+/* SPI SWITCH CHIP */
+static struct bfin5xx_spi_chip spi_switch_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
.enable_dma = 1,
@@ -226,6 +259,19 @@
},
#endif
+#if defined(CONFIG_NET_DSA_KSZ8893M) \
+ || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+ {
+ .modalias = "ksz8893m",
+ .max_speed_hz = 5000000,
+ .bus_num = 0,
+ .chip_select = 1,
+ .platform_data = NULL,
+ .controller_data = &spi_switch_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
{
.modalias = "spi_mmc_dummy",
@@ -473,7 +519,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@@ -487,7 +532,6 @@
},
#endif
};
-#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@@ -584,9 +628,14 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+ &ksz8893m_switch_device,
+#endif
+
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
&bfin_spi1_device,
@@ -632,12 +681,8 @@
static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
@@ -649,7 +694,7 @@
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h
index ac16d54..f618b48 100644
--- a/arch/blackfin/mach-bf518/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf518/include/mach/portmux.h
@@ -103,6 +103,8 @@
#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
+
/* SPORT Port Mux */
#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index a2c3578..856c097 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -403,8 +403,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -793,7 +798,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@@ -809,7 +813,6 @@
},
#endif
};
-#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@@ -920,6 +923,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -968,27 +972,23 @@
&bfin_gpios_device,
};
-static int __init stamp_init(void)
+static int __init cm_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(cm_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 0314bd3..83606fc 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -208,8 +208,13 @@
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -590,7 +595,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@@ -604,7 +608,6 @@
},
#endif
};
-#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@@ -720,6 +723,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -764,27 +768,23 @@
&bfin_gpios_device,
};
-static int __init stamp_init(void)
+static int __init ezbrd_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(ezbrd_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 9454fb7..d086411 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -425,8 +425,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -830,7 +835,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
@@ -844,7 +848,6 @@
},
#endif
};
-#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@@ -988,6 +991,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -1048,27 +1052,23 @@
&bfin_gpios_device,
};
-static int __init stamp_init(void)
+static int __init ezkit_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(ezkit_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
void bfin_get_ether_addr(char *addr)
diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
index 7f6da2c3..72b1652 100644
--- a/arch/blackfin/mach-bf527/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf527/include/mach/portmux.h
@@ -73,6 +73,8 @@
#define P_HWAIT (P_DONTCARE)
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
+
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 6ee607c..015c18f 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -309,10 +309,8 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
};
-#endif
static const unsigned int cclk_vlev_datasheet[] =
{
@@ -390,10 +388,8 @@
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 07f9ad1..db96f33 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -441,7 +441,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
@@ -461,7 +460,6 @@
},
#endif
};
-#endif
static const unsigned int cclk_vlev_datasheet[] =
{
@@ -550,10 +548,8 @@
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
if (ret < 0)
diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
index 685a265..2f59ce0 100644
--- a/arch/blackfin/mach-bf533/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf533/include/mach/portmux.h
@@ -54,14 +54,11 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#define P_TMR2 (P_DONTCARE)
#define P_TMR1 (P_DONTCARE)
#define P_TMR0 (P_DONTCARE)
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1))
-
-
-
-
#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 6ac8e4d..9cd8fb2 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -479,8 +479,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -591,6 +596,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index dd6e6bf..da710fd 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -262,8 +262,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -662,6 +667,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -708,7 +714,7 @@
#endif
};
-static int __init stamp_init(void)
+static int __init generic_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -720,13 +726,13 @@
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(generic_init);
void native_machine_restart(char *cmd)
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index bb79534..db7d3a3 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -61,8 +61,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -324,6 +329,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -377,5 +383,5 @@
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 89de94f..590eb3a 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -198,8 +198,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -529,6 +534,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -558,7 +564,7 @@
#endif
};
-static int __init stamp_init(void)
+static int __init pnav_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
@@ -569,7 +575,7 @@
return 0;
}
-arch_initcall(stamp_init);
+arch_initcall(pnav_init);
void bfin_get_ether_addr(char *addr)
{
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index d812e25..cd04c5e 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -321,8 +321,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -1068,7 +1073,6 @@
};
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
{
@@ -1102,7 +1106,6 @@
},
#endif
};
-#endif
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
static struct platform_device bfin_sport0_uart_device = {
@@ -1217,6 +1220,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -1284,12 +1288,8 @@
static int __init stamp_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info,
ARRAY_SIZE(bfin_i2c_board_info));
-#endif
-
bfin_plat_nand_init();
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
@@ -1307,7 +1307,7 @@
{
/* workaround reboot hang when booting from SPI */
if ((bfin_read_SYSCR() & 0x7) == 0x3)
- bfin_gpio_reset_spi0_ssel1();
+ bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}
/*
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 2f4b066..3f4f203 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -481,8 +481,13 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+ .name = "bfin_mii_bus",
+};
+
static struct platform_device bfin_mac_device = {
.name = "bfin_mac",
+ .dev.platform_data = &bfin_mii_bus,
};
#endif
@@ -593,6 +598,7 @@
#endif
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mii_bus,
&bfin_mac_device,
#endif
@@ -615,7 +621,7 @@
&bfin_gpios_device,
};
-static int __init cm_bf537_init(void)
+static int __init tcm_bf537_init(void)
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
@@ -629,7 +635,7 @@
return 0;
}
-arch_initcall(cm_bf537_init);
+arch_initcall(tcm_bf537_init);
void bfin_get_ether_addr(char *addr)
{
diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
index 78fee6e..87285e7 100644
--- a/arch/blackfin/mach-bf537/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf537/include/mach/portmux.h
@@ -31,6 +31,7 @@
#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h
index 1e031b5..c8db264 100644
--- a/arch/blackfin/mach-bf538/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf538/include/mach/portmux.h
@@ -102,5 +102,6 @@
#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 309c160..096e661 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -781,7 +781,6 @@
#endif
#endif
-#ifdef CONFIG_I2C_BOARDINFO
static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
};
@@ -800,7 +799,6 @@
#endif
};
#endif
-#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>
@@ -956,14 +954,12 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
-#ifdef CONFIG_I2C_BOARDINFO
i2c_register_board_info(0, bfin_i2c_board_info0,
ARRAY_SIZE(bfin_i2c_board_info0));
#if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */
i2c_register_board_info(1, bfin_i2c_board_info1,
ARRAY_SIZE(bfin_i2c_board_info1));
#endif
-#endif
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 3b54309..23d03c5 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -175,6 +175,7 @@
#define ANOMALY_05000311 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
#define ANOMALY_05000412 (0)
#define ANOMALY_05000432 (0)
#define ANOMALY_05000435 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
index f0e5699..cd31f72 100644
--- a/arch/blackfin/mach-bf548/include/mach/bf548.h
+++ b/arch/blackfin/mach-bf548/include/mach/bf548.h
@@ -104,6 +104,18 @@
#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
+#if defined(CONFIG_BF542M)
+# define CONFIG_BF542
+#elif defined(CONFIG_BF544M)
+# define CONFIG_BF544
+#elif defined(CONFIG_BF547M)
+# define CONFIG_BF547
+#elif defined(CONFIG_BF548M)
+# define CONFIG_BF548
+#elif defined(CONFIG_BF549M)
+# define CONFIG_BF549
+#endif
+
#if defined(CONFIG_BF542)
# define CPU "BF542"
# define CPUID 0x27de
diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
index bba82dc..3a20517 100644
--- a/arch/blackfin/mach-bf548/include/mach/gpio.h
+++ b/arch/blackfin/mach-bf548/include/mach/gpio.h
@@ -195,17 +195,17 @@
struct gpio_port_t {
unsigned short port_fer;
unsigned short dummy1;
- unsigned short port_data;
+ unsigned short data;
unsigned short dummy2;
- unsigned short port_set;
+ unsigned short data_set;
unsigned short dummy3;
- unsigned short port_clear;
+ unsigned short data_clear;
unsigned short dummy4;
- unsigned short port_dir_set;
+ unsigned short dir_set;
unsigned short dummy5;
- unsigned short port_dir_clear;
+ unsigned short dir_clear;
unsigned short dummy6;
- unsigned short port_inen;
+ unsigned short inen;
unsigned short dummy7;
unsigned int port_mux;
};
diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
index 8177a56..ffb1d0a 100644
--- a/arch/blackfin/mach-bf548/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf548/include/mach/portmux.h
@@ -125,6 +125,7 @@
#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1
#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
index d7c5097..cf92229 100644
--- a/arch/blackfin/mach-bf561/include/mach/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -1106,6 +1106,8 @@
#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
#define POL 0x0000C000 /* PPI Signal Polarities */
+#define POLC 0x4000 /* PPI Clock Polarity */
+#define POLS 0x8000 /* PPI Frame Sync Polarity */
/* PPI_STATUS Masks */
#define FLD 0x00000400 /* Field Indicator */
diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
index a6ee820..2e5ad63 100644
--- a/arch/blackfin/mach-bf561/include/mach/portmux.h
+++ b/arch/blackfin/mach-bf561/include/mach/portmux.h
@@ -85,5 +85,6 @@
#define P_SPI0_MOSI (P_DONTCARE)
#define P_SPI0_MISO (P_DONTCARE)
#define P_SPI0_SCK (P_DONTCARE)
+#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2
#endif /* _MACH_PORTMUX_H_ */
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 5d182ab..9dddb6f 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -14,6 +14,7 @@
#include <asm/clocks.h>
#include <asm/mem_init.h>
+#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
#define PLL_CTL_VAL \
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
(PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
@@ -76,7 +77,7 @@
bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
#ifdef EBIU_SDGCTL
bfin_write_EBIU_SDRRC(mem_SDRRC);
- bfin_write_EBIU_SDGCTL(mem_SDGCTL);
+ bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
#else
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
do_sync();
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index fae7746..88de053 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -151,13 +151,6 @@
jump.s _bfin_return_from_exception;
ENDPROC(_ex_syscall)
-ENTRY(_ex_soft_bp)
- r7 = retx;
- r7 += -2;
- retx = r7;
- jump.s _ex_trap_c;
-ENDPROC(_ex_soft_bp)
-
ENTRY(_ex_single_step)
/* If we just returned from an interrupt, the single step event is
for the RTI instruction. */
@@ -1087,7 +1080,7 @@
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
.long _ex_syscall /* 0x00 - User Defined - Linux Syscall */
- .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
+ .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */
#ifdef CONFIG_KGDB
.long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection
and break signal trap */
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index e1e42c0..698d4c0 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -17,6 +17,19 @@
__INIT
+ENTRY(__init_clear_bss)
+ r2 = r2 - r1;
+ cc = r2 == 0;
+ if cc jump .L_bss_done;
+ r2 >>= 2;
+ p1 = r1;
+ p2 = r2;
+ lsetup (1f, 1f) lc0 = p2;
+1: [p1++] = r0;
+.L_bss_done:
+ rts;
+ENDPROC(__init_clear_bss)
+
#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
ENTRY(__start)
@@ -144,6 +157,35 @@
call _init_early_exception_vectors;
#endif
+ r0 = 0 (x);
+ /* Zero out all of the fun bss regions */
+#if L1_DATA_A_LENGTH > 0
+ r1.l = __sbss_l1;
+ r1.h = __sbss_l1;
+ r2.l = __ebss_l1;
+ r2.h = __ebss_l1;
+ call __init_clear_bss
+#endif
+#if L1_DATA_B_LENGTH > 0
+ r1.l = __sbss_b_l1;
+ r1.h = __sbss_b_l1;
+ r2.l = __ebss_b_l1;
+ r2.h = __ebss_b_l1;
+ call __init_clear_bss
+#endif
+#if L2_LENGTH > 0
+ r1.l = __sbss_l2;
+ r1.h = __sbss_l2;
+ r2.l = __ebss_l2;
+ r2.h = __ebss_l2;
+ call __init_clear_bss
+#endif
+ r1.l = ___bss_start;
+ r1.h = ___bss_start;
+ r2.l = ___bss_stop;
+ r2.h = ___bss_stop;
+ call __init_clear_bss
+
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
@@ -185,19 +227,6 @@
# define WDOG_CTL WDOGA_CTL
#endif
-ENTRY(__init_clear_bss)
- r2 = r2 - r1;
- cc = r2 == 0;
- if cc jump .L_bss_done;
- r2 >>= 2;
- p1 = r1;
- p2 = r2;
- lsetup (1f, 1f) lc0 = p2;
-1: [p1++] = r0;
-.L_bss_done:
- rts;
-ENDPROC(__init_clear_bss)
-
ENTRY(_real_start)
/* Enable nested interrupts */
[--sp] = reti;
@@ -209,35 +238,6 @@
w[p0] = r0;
ssync;
- r0 = 0 (x);
- /* Zero out all of the fun bss regions */
-#if L1_DATA_A_LENGTH > 0
- r1.l = __sbss_l1;
- r1.h = __sbss_l1;
- r2.l = __ebss_l1;
- r2.h = __ebss_l1;
- call __init_clear_bss
-#endif
-#if L1_DATA_B_LENGTH > 0
- r1.l = __sbss_b_l1;
- r1.h = __sbss_b_l1;
- r2.l = __ebss_b_l1;
- r2.h = __ebss_b_l1;
- call __init_clear_bss
-#endif
-#if L2_LENGTH > 0
- r1.l = __sbss_l2;
- r1.h = __sbss_l2;
- r2.l = __ebss_l2;
- r2.h = __ebss_l2;
- call __init_clear_bss
-#endif
- r1.l = ___bss_start;
- r1.h = ___bss_start;
- r2.l = ___bss_stop;
- r2.h = ___bss_stop;
- call __init_clear_bss
-
/* Pass the u-boot arguments to the global value command line */
R0 = R7;
call _cmdline_init;
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 473df0f..43c4eb9 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -195,7 +195,7 @@
/* Interrupt routine for evt2 (NMI).
* We don't actually use this, so just return.
* For inner circle type details, please see:
- * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi
*/
ENTRY(_evt_nmi)
.weak _evt_nmi
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 1bba603..2024945 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1101,10 +1101,9 @@
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
- || defined(BF538_FAMILY) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
/* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
@@ -1114,10 +1113,8 @@
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
- bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index d3d70fd..f48a6ae 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -82,10 +82,9 @@
bfin_pm_standby_restore();
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \
- defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
+#ifdef SIC_IWR0
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+# ifdef SIC_IWR1
/* BF52x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
@@ -95,10 +94,8 @@
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
else
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#else
- bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
-#endif
-# ifdef CONFIG_BF54x
+# endif
+# ifdef SIC_IWR2
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
index 7da7c13..a11b89e 100644
--- a/arch/sparc/include/asm/cpudata_64.h
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -17,7 +17,7 @@
typedef struct {
/* Dcache line 1 */
unsigned int __softirq_pending; /* must be 1st, see rtrap.S */
- unsigned int __pad0;
+ unsigned int __nmi_count;
unsigned long clock_tick; /* %tick's per second */
unsigned long __pad;
unsigned int __pad1;
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index d47d4a1..1934f2c 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -66,9 +66,6 @@
extern void __init init_IRQ(void);
extern void fixup_irqs(void);
-extern int register_perfctr_intr(void (*handler)(struct pt_regs *));
-extern void release_perfctr_intr(void (*handler)(struct pt_regs *));
-
static inline void set_softint(unsigned long bits)
{
__asm__ __volatile__("wr %0, 0x0, %%set_softint"
@@ -98,5 +95,6 @@
extern void *hardirq_stack[NR_CPUS];
extern void *softirq_stack[NR_CPUS];
#define __ARCH_HAS_DO_SOFTIRQ
+#define ARCH_HAS_NMI_WATCHDOG
#endif
diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
index f905b77..feb3578 100644
--- a/arch/sparc/include/asm/kdebug_64.h
+++ b/arch/sparc/include/asm/kdebug_64.h
@@ -14,6 +14,8 @@
DIE_TRAP,
DIE_TRAP_TL1,
DIE_CALL,
+ DIE_NMI,
+ DIE_NMIWATCHDOG,
};
#endif
diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
new file mode 100644
index 0000000..fbd546d
--- /dev/null
+++ b/arch/sparc/include/asm/nmi.h
@@ -0,0 +1,10 @@
+#ifndef __NMI_H
+#define __NMI_H
+
+extern int __init nmi_init(void);
+extern void perfctr_irq(int irq, struct pt_regs *regs);
+extern void nmi_adjust_hz(unsigned int new_hz);
+
+extern int nmi_usable;
+
+#endif /* __NMI_H */
diff --git a/arch/sparc/include/asm/pcr.h b/arch/sparc/include/asm/pcr.h
new file mode 100644
index 0000000..a2f5c61
--- /dev/null
+++ b/arch/sparc/include/asm/pcr.h
@@ -0,0 +1,46 @@
+#ifndef __PCR_H
+#define __PCR_H
+
+struct pcr_ops {
+ u64 (*read)(void);
+ void (*write)(u64);
+};
+extern const struct pcr_ops *pcr_ops;
+
+extern void deferred_pcr_work_irq(int irq, struct pt_regs *regs);
+extern void schedule_deferred_pcr_work(void);
+
+#define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */
+#define PCR_STRACE 0x00000002 /* Trace supervisor events */
+#define PCR_UTRACE 0x00000004 /* Trace user events */
+#define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */
+#define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */
+#define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */
+#define PCR_N2_MASK0 0x00003fc0
+#define PCR_N2_MASK0_SHIFT 6
+#define PCR_N2_SL0 0x0003c000
+#define PCR_N2_SL0_SHIFT 14
+#define PCR_N2_OV0 0x00040000
+#define PCR_N2_MASK1 0x07f80000
+#define PCR_N2_MASK1_SHIFT 19
+#define PCR_N2_SL1 0x78000000
+#define PCR_N2_SL1_SHIFT 27
+#define PCR_N2_OV1 0x80000000
+
+extern unsigned int picl_shift;
+
+/* In order to commonize as much of the implementation as
+ * possible, we use PICH as our counter. Mostly this is
+ * to accomodate Niagara-1 which can only count insn cycles
+ * in PICH.
+ */
+static inline u64 picl_value(unsigned int nmi_hz)
+{
+ u32 delta = local_cpu_data().clock_tick / (nmi_hz << picl_shift);
+
+ return ((u64)((0 - delta) & 0xffffffff)) << 32;
+}
+
+extern u64 pcr_enable;
+
+#endif /* __PCR_H */
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
index d573820..32a7efe 100644
--- a/arch/sparc/include/asm/pil.h
+++ b/arch/sparc/include/asm/pil.h
@@ -23,6 +23,7 @@
#define PIL_SMP_CTX_NEW_VERSION 4
#define PIL_DEVICE_IRQ 5
#define PIL_SMP_CALL_FUNC_SNGL 6
+#define PIL_DEFERRED_PCR_WORK 7
#define PIL_NORMAL_MAX 14
#define PIL_NMI 15
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 53adcaa..54742e5 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -52,6 +52,8 @@
obj-$(CONFIG_SPARC64) += hvapi.o
obj-$(CONFIG_SPARC64) += sstate.o
obj-$(CONFIG_SPARC64) += mdesc.o
+obj-$(CONFIG_SPARC64) += pcr.o
+obj-$(CONFIG_SPARC64) += nmi.o
# sparc32 do not use GENERIC_HARDIRQS but uses the generic devres implementation
obj-$(CONFIG_SPARC32) += devres.o
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 32d32b4..d85c3dc 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -26,6 +26,7 @@
struct cpu_info {
int psr_vers;
const char *name;
+ const char *pmu_name;
};
struct fpu_info {
@@ -45,6 +46,9 @@
#define CPU(ver, _name) \
{ .psr_vers = ver, .name = _name }
+#define CPU_PMU(ver, _name, _pmu_name) \
+{ .psr_vers = ver, .name = _name, .pmu_name = _pmu_name }
+
#define FPU(ver, _name) \
{ .fp_vers = ver, .name = _name }
@@ -183,10 +187,10 @@
},{
0x17,
.cpu_info = {
- CPU(0x10, "TI UltraSparc I (SpitFire)"),
- CPU(0x11, "TI UltraSparc II (BlackBird)"),
- CPU(0x12, "TI UltraSparc IIi (Sabre)"),
- CPU(0x13, "TI UltraSparc IIe (Hummingbird)"),
+ CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"),
+ CPU_PMU(0x11, "TI UltraSparc II (BlackBird)", "ultra12"),
+ CPU_PMU(0x12, "TI UltraSparc IIi (Sabre)", "ultra12"),
+ CPU_PMU(0x13, "TI UltraSparc IIe (Hummingbird)", "ultra12"),
CPU(-1, NULL)
},
.fpu_info = {
@@ -199,7 +203,7 @@
},{
0x22,
.cpu_info = {
- CPU(0x10, "TI UltraSparc I (SpitFire)"),
+ CPU_PMU(0x10, "TI UltraSparc I (SpitFire)", "ultra12"),
CPU(-1, NULL)
},
.fpu_info = {
@@ -209,12 +213,12 @@
},{
0x3e,
.cpu_info = {
- CPU(0x14, "TI UltraSparc III (Cheetah)"),
- CPU(0x15, "TI UltraSparc III+ (Cheetah+)"),
- CPU(0x16, "TI UltraSparc IIIi (Jalapeno)"),
- CPU(0x18, "TI UltraSparc IV (Jaguar)"),
- CPU(0x19, "TI UltraSparc IV+ (Panther)"),
- CPU(0x22, "TI UltraSparc IIIi+ (Serrano)"),
+ CPU_PMU(0x14, "TI UltraSparc III (Cheetah)", "ultra3"),
+ CPU_PMU(0x15, "TI UltraSparc III+ (Cheetah+)", "ultra3+"),
+ CPU_PMU(0x16, "TI UltraSparc IIIi (Jalapeno)", "ultra3i"),
+ CPU_PMU(0x18, "TI UltraSparc IV (Jaguar)", "ultra3+"),
+ CPU_PMU(0x19, "TI UltraSparc IV+ (Panther)", "ultra4+"),
+ CPU_PMU(0x22, "TI UltraSparc IIIi+ (Serrano)", "ultra3i"),
CPU(-1, NULL)
},
.fpu_info = {
@@ -234,6 +238,7 @@
const char *sparc_cpu_type;
const char *sparc_fpu_type;
+const char *sparc_pmu_type;
unsigned int fsr_storage;
@@ -244,6 +249,7 @@
sparc_cpu_type = NULL;
sparc_fpu_type = NULL;
+ sparc_pmu_type = NULL;
manuf = NULL;
for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++)
@@ -263,6 +269,7 @@
{
if (cpu->psr_vers == psr_vers) {
sparc_cpu_type = cpu->name;
+ sparc_pmu_type = cpu->pmu_name;
sparc_fpu_type = "No FPU";
break;
}
@@ -290,6 +297,8 @@
psr_impl, fpu_vers);
sparc_fpu_type = "Unknown FPU";
}
+ if (sparc_pmu_type == NULL)
+ sparc_pmu_type = "Unknown PMU";
}
#ifdef CONFIG_SPARC32
@@ -315,11 +324,13 @@
case SUN4V_CHIP_NIAGARA1:
sparc_cpu_type = "UltraSparc T1 (Niagara)";
sparc_fpu_type = "UltraSparc T1 integrated FPU";
+ sparc_pmu_type = "niagara";
break;
case SUN4V_CHIP_NIAGARA2:
sparc_cpu_type = "UltraSparc T2 (Niagara2)";
sparc_fpu_type = "UltraSparc T2 integrated FPU";
+ sparc_pmu_type = "niagara2";
break;
default:
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index cab8e028..e289376 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -196,6 +196,11 @@
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ } else if (i == NR_IRQS) {
+ seq_printf(p, "NMI: ");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", cpu_data(j).__nmi_count);
+ seq_printf(p, " Non-maskable interrupts\n");
}
return 0;
}
@@ -778,69 +783,6 @@
local_irq_restore(flags);
}
-static void unhandled_perf_irq(struct pt_regs *regs)
-{
- unsigned long pcr, pic;
-
- read_pcr(pcr);
- read_pic(pic);
-
- write_pcr(0);
-
- printk(KERN_EMERG "CPU %d: Got unexpected perf counter IRQ.\n",
- smp_processor_id());
- printk(KERN_EMERG "CPU %d: PCR[%016lx] PIC[%016lx]\n",
- smp_processor_id(), pcr, pic);
-}
-
-/* Almost a direct copy of the powerpc PMC code. */
-static DEFINE_SPINLOCK(perf_irq_lock);
-static void *perf_irq_owner_caller; /* mostly for debugging */
-static void (*perf_irq)(struct pt_regs *regs) = unhandled_perf_irq;
-
-/* Invoked from level 15 PIL handler in trap table. */
-void perfctr_irq(int irq, struct pt_regs *regs)
-{
- clear_softint(1 << irq);
- perf_irq(regs);
-}
-
-int register_perfctr_intr(void (*handler)(struct pt_regs *))
-{
- int ret;
-
- if (!handler)
- return -EINVAL;
-
- spin_lock(&perf_irq_lock);
- if (perf_irq != unhandled_perf_irq) {
- printk(KERN_WARNING "register_perfctr_intr: "
- "perf IRQ busy (reserved by caller %p)\n",
- perf_irq_owner_caller);
- ret = -EBUSY;
- goto out;
- }
-
- perf_irq_owner_caller = __builtin_return_address(0);
- perf_irq = handler;
-
- ret = 0;
-out:
- spin_unlock(&perf_irq_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(register_perfctr_intr);
-
-void release_perfctr_intr(void (*handler)(struct pt_regs *))
-{
- spin_lock(&perf_irq_lock);
- perf_irq_owner_caller = NULL;
- perf_irq = unhandled_perf_irq;
- spin_unlock(&perf_irq_lock);
-}
-EXPORT_SYMBOL_GPL(release_perfctr_intr);
-
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(void)
{
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index 81a972e..15d8a3f 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -5,6 +5,7 @@
/* cpu.c */
extern const char *sparc_cpu_type;
+extern const char *sparc_pmu_type;
extern const char *sparc_fpu_type;
extern unsigned int fsr_storage;
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
new file mode 100644
index 0000000..09f088e
--- /dev/null
+++ b/arch/sparc/kernel/nmi.c
@@ -0,0 +1,224 @@
+/* Pseudo NMI support on sparc64 systems.
+ *
+ * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ *
+ * The NMI watchdog support and infrastructure is based almost
+ * entirely upon the x86 NMI support code.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/nmi.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/kernel_stat.h>
+#include <linux/slab.h>
+#include <linux/kdebug.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+
+#include <asm/ptrace.h>
+#include <asm/local.h>
+#include <asm/pcr.h>
+
+/* We don't have a real NMI on sparc64, but we can fake one
+ * up using profiling counter overflow interrupts and interrupt
+ * levels.
+ *
+ * The profile overflow interrupts at level 15, so we use
+ * level 14 as our IRQ off level.
+ */
+
+static int nmi_watchdog_active;
+static int panic_on_timeout;
+
+int nmi_usable;
+EXPORT_SYMBOL_GPL(nmi_usable);
+
+static unsigned int nmi_hz = HZ;
+
+static DEFINE_PER_CPU(unsigned int, last_irq_sum);
+static DEFINE_PER_CPU(local_t, alert_counter);
+static DEFINE_PER_CPU(int, nmi_touch);
+
+void touch_nmi_watchdog(void)
+{
+ if (nmi_watchdog_active) {
+ int cpu;
+
+ for_each_present_cpu(cpu) {
+ if (per_cpu(nmi_touch, cpu) != 1)
+ per_cpu(nmi_touch, cpu) = 1;
+ }
+ }
+
+ touch_softlockup_watchdog();
+}
+EXPORT_SYMBOL(touch_nmi_watchdog);
+
+static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
+{
+ if (notify_die(DIE_NMIWATCHDOG, str, regs, 0,
+ pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
+ return;
+
+ console_verbose();
+ bust_spinlocks(1);
+
+ printk(KERN_EMERG "%s", str);
+ printk(" on CPU%d, ip %08lx, registers:\n",
+ smp_processor_id(), regs->tpc);
+ show_regs(regs);
+
+ bust_spinlocks(0);
+
+ if (do_panic || panic_on_oops)
+ panic("Non maskable interrupt");
+
+ local_irq_enable();
+ do_exit(SIGBUS);
+}
+
+notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
+{
+ unsigned int sum, touched = 0;
+ int cpu = smp_processor_id();
+
+ clear_softint(1 << irq);
+ pcr_ops->write(PCR_PIC_PRIV);
+
+ local_cpu_data().__nmi_count++;
+
+ if (notify_die(DIE_NMI, "nmi", regs, 0,
+ pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
+ touched = 1;
+
+ sum = kstat_irqs_cpu(0, cpu);
+ if (__get_cpu_var(nmi_touch)) {
+ __get_cpu_var(nmi_touch) = 0;
+ touched = 1;
+ }
+ if (!touched && __get_cpu_var(last_irq_sum) == sum) {
+ local_inc(&__get_cpu_var(alert_counter));
+ if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz)
+ die_nmi("BUG: NMI Watchdog detected LOCKUP",
+ regs, panic_on_timeout);
+ } else {
+ __get_cpu_var(last_irq_sum) = sum;
+ local_set(&__get_cpu_var(alert_counter), 0);
+ }
+ if (nmi_usable) {
+ write_pic(picl_value(nmi_hz));
+ pcr_ops->write(pcr_enable);
+ }
+}
+
+static inline unsigned int get_nmi_count(int cpu)
+{
+ return cpu_data(cpu).__nmi_count;
+}
+
+static int endflag __initdata;
+
+static __init void nmi_cpu_busy(void *data)
+{
+ local_irq_enable_in_hardirq();
+ while (endflag == 0)
+ mb();
+}
+
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+ printk(KERN_CONT "\n");
+
+ printk(KERN_WARNING
+ "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+ printk(KERN_WARNING
+ "Please report this to bugzilla.kernel.org,\n");
+ printk(KERN_WARNING
+ "and attach the output of the 'dmesg' command.\n");
+
+ nmi_usable = 0;
+}
+
+static void stop_watchdog(void *unused)
+{
+ pcr_ops->write(PCR_PIC_PRIV);
+}
+
+static int __init check_nmi_watchdog(void)
+{
+ unsigned int *prev_nmi_count;
+ int cpu, err;
+
+ prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
+ if (!prev_nmi_count) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ printk(KERN_INFO "Testing NMI watchdog ... ");
+
+ smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
+
+ for_each_possible_cpu(cpu)
+ prev_nmi_count[cpu] = get_nmi_count(cpu);
+ local_irq_enable();
+ mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
+
+ for_each_online_cpu(cpu) {
+ if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+ report_broken_nmi(cpu, prev_nmi_count);
+ }
+ endflag = 1;
+ if (!nmi_usable) {
+ kfree(prev_nmi_count);
+ err = -ENODEV;
+ goto error;
+ }
+ printk("OK.\n");
+
+ nmi_hz = 1;
+
+ kfree(prev_nmi_count);
+ return 0;
+error:
+ on_each_cpu(stop_watchdog, NULL, 1);
+ return err;
+}
+
+static void start_watchdog(void *unused)
+{
+ pcr_ops->write(PCR_PIC_PRIV);
+ write_pic(picl_value(nmi_hz));
+
+ pcr_ops->write(pcr_enable);
+}
+
+void nmi_adjust_hz(unsigned int new_hz)
+{
+ nmi_hz = new_hz;
+ on_each_cpu(start_watchdog, NULL, 1);
+}
+EXPORT_SYMBOL_GPL(nmi_adjust_hz);
+
+int __init nmi_init(void)
+{
+ nmi_usable = 1;
+
+ on_each_cpu(start_watchdog, NULL, 1);
+
+ return check_nmi_watchdog();
+}
+
+static int __init setup_nmi_watchdog(char *str)
+{
+ if (!strncmp(str, "panic", 5))
+ panic_on_timeout = 1;
+
+ return 0;
+}
+__setup("nmi_watchdog=", setup_nmi_watchdog);
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
new file mode 100644
index 0000000..92e0dda
--- /dev/null
+++ b/arch/sparc/kernel/pcr.c
@@ -0,0 +1,153 @@
+/* pcr.c: Generic sparc64 performance counter infrastructure.
+ *
+ * Copyright (C) 2009 David S. Miller (davem@davemloft.net)
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/pil.h>
+#include <asm/pcr.h>
+#include <asm/nmi.h>
+
+/* This code is shared between various users of the performance
+ * counters. Users will be oprofile, pseudo-NMI watchdog, and the
+ * perf_counter support layer.
+ */
+
+#define PCR_SUN4U_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
+#define PCR_N2_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \
+ PCR_N2_TOE_OV1 | \
+ (2 << PCR_N2_SL1_SHIFT) | \
+ (0xff << PCR_N2_MASK1_SHIFT))
+
+u64 pcr_enable;
+unsigned int picl_shift;
+
+/* Performance counter interrupts run unmasked at PIL level 15.
+ * Therefore we can't do things like wakeups and other work
+ * that expects IRQ disabling to be adhered to in locking etc.
+ *
+ * Therefore in such situations we defer the work by signalling
+ * a lower level cpu IRQ.
+ */
+void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
+{
+ clear_softint(1 << PIL_DEFERRED_PCR_WORK);
+}
+
+void schedule_deferred_pcr_work(void)
+{
+ set_softint(1 << PIL_DEFERRED_PCR_WORK);
+}
+
+const struct pcr_ops *pcr_ops;
+EXPORT_SYMBOL_GPL(pcr_ops);
+
+static u64 direct_pcr_read(void)
+{
+ u64 val;
+
+ read_pcr(val);
+ return val;
+}
+
+static void direct_pcr_write(u64 val)
+{
+ write_pcr(val);
+}
+
+static const struct pcr_ops direct_pcr_ops = {
+ .read = direct_pcr_read,
+ .write = direct_pcr_write,
+};
+
+static void n2_pcr_write(u64 val)
+{
+ unsigned long ret;
+
+ ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val);
+ if (val != HV_EOK)
+ write_pcr(val);
+}
+
+static const struct pcr_ops n2_pcr_ops = {
+ .read = direct_pcr_read,
+ .write = n2_pcr_write,
+};
+
+static unsigned long perf_hsvc_group;
+static unsigned long perf_hsvc_major;
+static unsigned long perf_hsvc_minor;
+
+static int __init register_perf_hsvc(void)
+{
+ if (tlb_type == hypervisor) {
+ switch (sun4v_chip_type) {
+ case SUN4V_CHIP_NIAGARA1:
+ perf_hsvc_group = HV_GRP_NIAG_PERF;
+ break;
+
+ case SUN4V_CHIP_NIAGARA2:
+ perf_hsvc_group = HV_GRP_N2_CPU;
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+
+ perf_hsvc_major = 1;
+ perf_hsvc_minor = 0;
+ if (sun4v_hvapi_register(perf_hsvc_group,
+ perf_hsvc_major,
+ &perf_hsvc_minor)) {
+ printk("perfmon: Could not register hvapi.\n");
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+static void __init unregister_perf_hsvc(void)
+{
+ if (tlb_type != hypervisor)
+ return;
+ sun4v_hvapi_unregister(perf_hsvc_group);
+}
+
+int __init pcr_arch_init(void)
+{
+ int err = register_perf_hsvc();
+
+ if (err)
+ return err;
+
+ switch (tlb_type) {
+ case hypervisor:
+ pcr_ops = &n2_pcr_ops;
+ pcr_enable = PCR_N2_ENABLE;
+ picl_shift = 2;
+ break;
+
+ case cheetah:
+ case cheetah_plus:
+ case spitfire:
+ pcr_ops = &direct_pcr_ops;
+ pcr_enable = PCR_SUN4U_ENABLE;
+ break;
+
+ default:
+ err = -ENODEV;
+ goto out_unregister;
+ }
+
+ return nmi_init();
+
+out_unregister:
+ unregister_perf_hsvc();
+ return err;
+}
+
+arch_initcall(pcr_arch_init);
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index cc8b560..a73954b 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -29,6 +29,7 @@
#include <linux/cpu.h>
#include <linux/elfcore.h>
#include <linux/sysrq.h>
+#include <linux/nmi.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -52,8 +53,10 @@
static void sparc64_yield(int cpu)
{
- if (tlb_type != hypervisor)
+ if (tlb_type != hypervisor) {
+ touch_nmi_watchdog();
return;
+ }
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 49d061f..f2bcfd2 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -354,6 +354,7 @@
seq_printf(m,
"cpu\t\t: %s\n"
"fpu\t\t: %s\n"
+ "pmu\t\t: %s\n"
"prom\t\t: %s\n"
"type\t\t: %s\n"
"ncpus probed\t: %d\n"
@@ -366,6 +367,7 @@
,
sparc_cpu_type,
sparc_fpu_type,
+ sparc_pmu_type,
prom_version,
((tlb_type == hypervisor) ?
"sun4v" :
diff --git a/arch/sparc/kernel/ttable.S b/arch/sparc/kernel/ttable.S
index ea92550..d9bdfb9 100644
--- a/arch/sparc/kernel/ttable.S
+++ b/arch/sparc/kernel/ttable.S
@@ -63,7 +63,8 @@
#else
tl0_irq6: BTRAP(0x46)
#endif
-tl0_irq7: BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+tl0_irq7: TRAP_IRQ(deferred_pcr_work_irq, 7)
+tl0_irq8: BTRAP(0x48) BTRAP(0x49)
tl0_irq10: BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
tl0_irq14: TRAP_IRQ(timer_interrupt, 14)
tl0_irq15: TRAP_NMI_IRQ(perfctr_irq, 15)
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index a9e474b..4ab8993 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
+#include <linux/percpu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
@@ -224,6 +225,30 @@
unhandled_fault (address, current, regs);
}
+static void noinline bogus_32bit_fault_tpc(struct pt_regs *regs)
+{
+ static int times;
+
+ if (times++ < 10)
+ printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
+ "64-bit TPC [%lx]\n",
+ current->comm, current->pid,
+ regs->tpc);
+ show_regs(regs);
+}
+
+static void noinline bogus_32bit_fault_address(struct pt_regs *regs,
+ unsigned long addr)
+{
+ static int times;
+
+ if (times++ < 10)
+ printk(KERN_ERR "FAULT[%s:%d]: 32-bit process "
+ "reports 64-bit fault address [%lx]\n",
+ current->comm, current->pid, addr);
+ show_regs(regs);
+}
+
asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
{
struct mm_struct *mm = current->mm;
@@ -244,6 +269,19 @@
(fault_code & FAULT_CODE_DTLB))
BUG();
+ if (test_thread_flag(TIF_32BIT)) {
+ if (!(regs->tstate & TSTATE_PRIV)) {
+ if (unlikely((regs->tpc >> 32) != 0)) {
+ bogus_32bit_fault_tpc(regs);
+ goto intr_or_no_mm;
+ }
+ }
+ if (unlikely((address >> 32) != 0)) {
+ bogus_32bit_fault_address(regs, address);
+ goto intr_or_no_mm;
+ }
+ }
+
if (regs->tstate & TSTATE_PRIV) {
unsigned long tpc = regs->tpc;
@@ -264,12 +302,6 @@
if (in_atomic() || !mm)
goto intr_or_no_mm;
- if (test_thread_flag(TIF_32BIT)) {
- if (!(regs->tstate & TSTATE_PRIV))
- regs->tpc &= 0xffffffff;
- address &= 0xffffffff;
- }
-
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index d6e170c..d172f86 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -13,217 +13,57 @@
#include <linux/init.h>
#ifdef CONFIG_SPARC64
-#include <asm/hypervisor.h>
-#include <asm/spitfire.h>
-#include <asm/cpudata.h>
-#include <asm/irq.h>
+#include <linux/notifier.h>
+#include <linux/rcupdate.h>
+#include <linux/kdebug.h>
+#include <asm/nmi.h>
-static int nmi_enabled;
-
-struct pcr_ops {
- u64 (*read)(void);
- void (*write)(u64);
-};
-static const struct pcr_ops *pcr_ops;
-
-static u64 direct_pcr_read(void)
+static int profile_timer_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
{
- u64 val;
+ struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
- read_pcr(val);
- return val;
+ switch (val) {
+ case DIE_NMI:
+ oprofile_add_sample(args->regs, 0);
+ ret = NOTIFY_STOP;
+ break;
+ default:
+ break;
+ }
+ return ret;
}
-static void direct_pcr_write(u64 val)
-{
- write_pcr(val);
-}
-
-static const struct pcr_ops direct_pcr_ops = {
- .read = direct_pcr_read,
- .write = direct_pcr_write,
+static struct notifier_block profile_timer_exceptions_nb = {
+ .notifier_call = profile_timer_exceptions_notify,
};
-static void n2_pcr_write(u64 val)
+static int timer_start(void)
{
- unsigned long ret;
-
- ret = sun4v_niagara2_setperf(HV_N2_PERF_SPARC_CTL, val);
- if (val != HV_EOK)
- write_pcr(val);
-}
-
-static const struct pcr_ops n2_pcr_ops = {
- .read = direct_pcr_read,
- .write = n2_pcr_write,
-};
-
-/* In order to commonize as much of the implementation as
- * possible, we use PICH as our counter. Mostly this is
- * to accomodate Niagara-1 which can only count insn cycles
- * in PICH.
- */
-static u64 picl_value(void)
-{
- u32 delta = local_cpu_data().clock_tick / HZ;
-
- return ((u64)((0 - delta) & 0xffffffff)) << 32;
-}
-
-#define PCR_PIC_PRIV 0x00000001 /* PIC access is privileged */
-#define PCR_STRACE 0x00000002 /* Trace supervisor events */
-#define PCR_UTRACE 0x00000004 /* Trace user events */
-#define PCR_N2_HTRACE 0x00000008 /* Trace hypervisor events */
-#define PCR_N2_TOE_OV0 0x00000010 /* Trap if PIC 0 overflows */
-#define PCR_N2_TOE_OV1 0x00000020 /* Trap if PIC 1 overflows */
-#define PCR_N2_MASK0 0x00003fc0
-#define PCR_N2_MASK0_SHIFT 6
-#define PCR_N2_SL0 0x0003c000
-#define PCR_N2_SL0_SHIFT 14
-#define PCR_N2_OV0 0x00040000
-#define PCR_N2_MASK1 0x07f80000
-#define PCR_N2_MASK1_SHIFT 19
-#define PCR_N2_SL1 0x78000000
-#define PCR_N2_SL1_SHIFT 27
-#define PCR_N2_OV1 0x80000000
-
-#define PCR_SUN4U_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE)
-#define PCR_N2_ENABLE (PCR_PIC_PRIV | PCR_STRACE | PCR_UTRACE | \
- PCR_N2_TOE_OV1 | \
- (2 << PCR_N2_SL1_SHIFT) | \
- (0xff << PCR_N2_MASK1_SHIFT))
-
-static u64 pcr_enable = PCR_SUN4U_ENABLE;
-
-static void nmi_handler(struct pt_regs *regs)
-{
- pcr_ops->write(PCR_PIC_PRIV);
-
- if (nmi_enabled) {
- oprofile_add_sample(regs, 0);
-
- write_pic(picl_value());
- pcr_ops->write(pcr_enable);
- }
-}
-
-/* We count "clock cycle" events in the lower 32-bit PIC.
- * Then configure it such that it overflows every HZ, and thus
- * generates a level 15 interrupt at that frequency.
- */
-static void cpu_nmi_start(void *_unused)
-{
- pcr_ops->write(PCR_PIC_PRIV);
- write_pic(picl_value());
-
- pcr_ops->write(pcr_enable);
-}
-
-static void cpu_nmi_stop(void *_unused)
-{
- pcr_ops->write(PCR_PIC_PRIV);
-}
-
-static int nmi_start(void)
-{
- int err = register_perfctr_intr(nmi_handler);
-
- if (!err) {
- nmi_enabled = 1;
- wmb();
- err = on_each_cpu(cpu_nmi_start, NULL, 1);
- if (err) {
- nmi_enabled = 0;
- wmb();
- on_each_cpu(cpu_nmi_stop, NULL, 1);
- release_perfctr_intr(nmi_handler);
- }
- }
-
- return err;
-}
-
-static void nmi_stop(void)
-{
- nmi_enabled = 0;
- wmb();
-
- on_each_cpu(cpu_nmi_stop, NULL, 1);
- release_perfctr_intr(nmi_handler);
- synchronize_sched();
-}
-
-static unsigned long perf_hsvc_group;
-static unsigned long perf_hsvc_major;
-static unsigned long perf_hsvc_minor;
-
-static int __init register_perf_hsvc(void)
-{
- if (tlb_type == hypervisor) {
- switch (sun4v_chip_type) {
- case SUN4V_CHIP_NIAGARA1:
- perf_hsvc_group = HV_GRP_NIAG_PERF;
- break;
-
- case SUN4V_CHIP_NIAGARA2:
- perf_hsvc_group = HV_GRP_N2_CPU;
- break;
-
- default:
- return -ENODEV;
- }
-
-
- perf_hsvc_major = 1;
- perf_hsvc_minor = 0;
- if (sun4v_hvapi_register(perf_hsvc_group,
- perf_hsvc_major,
- &perf_hsvc_minor)) {
- printk("perfmon: Could not register N2 hvapi.\n");
- return -ENODEV;
- }
- }
+ if (register_die_notifier(&profile_timer_exceptions_nb))
+ return 1;
+ nmi_adjust_hz(HZ);
return 0;
}
-static void unregister_perf_hsvc(void)
+
+static void timer_stop(void)
{
- if (tlb_type != hypervisor)
- return;
- sun4v_hvapi_unregister(perf_hsvc_group);
+ nmi_adjust_hz(1);
+ unregister_die_notifier(&profile_timer_exceptions_nb);
+ synchronize_sched(); /* Allow already-started NMIs to complete. */
}
-static int oprofile_nmi_init(struct oprofile_operations *ops)
+static int op_nmi_timer_init(struct oprofile_operations *ops)
{
- int err = register_perf_hsvc();
-
- if (err)
- return err;
-
- switch (tlb_type) {
- case hypervisor:
- pcr_ops = &n2_pcr_ops;
- pcr_enable = PCR_N2_ENABLE;
- break;
-
- case cheetah:
- case cheetah_plus:
- pcr_ops = &direct_pcr_ops;
- break;
-
- default:
+ if (!nmi_usable)
return -ENODEV;
- }
- ops->create_files = NULL;
- ops->setup = NULL;
- ops->shutdown = NULL;
- ops->start = nmi_start;
- ops->stop = nmi_stop;
+ ops->start = timer_start;
+ ops->stop = timer_stop;
ops->cpu_type = "timer";
-
- printk(KERN_INFO "oprofile: Using perfctr based NMI timer interrupt.\n");
-
+ printk(KERN_INFO "oprofile: Using perfctr NMI timer interrupt.\n");
return 0;
}
#endif
@@ -233,7 +73,7 @@
int ret = -ENODEV;
#ifdef CONFIG_SPARC64
- ret = oprofile_nmi_init(ops);
+ ret = op_nmi_timer_init(ops);
if (!ret)
return ret;
#endif
@@ -241,10 +81,6 @@
return ret;
}
-
void oprofile_arch_exit(void)
{
-#ifdef CONFIG_SPARC64
- unregister_perf_hsvc();
-#endif
}
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 4b6df24..115449f 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -1436,7 +1436,7 @@
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||
- (boot_cpu_data.x86 == 15))
+ (boot_cpu_data.x86 >= 15))
break;
goto no_apic;
case X86_VENDOR_INTEL:
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 48533d7..da299eb 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -36,8 +36,11 @@
{
{ 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
{ 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x09, LVL_1_INST, 32 }, /* 4-way set assoc, 64 byte line size */
{ 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */
{ 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */
+ { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */
{ 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
{ 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64 byte line size */
{ 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64 byte line size */
@@ -85,6 +88,18 @@
{ 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */
{ 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */
{ 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */
+ { 0xd0, LVL_3, 512 }, /* 4-way set assoc, 64 byte line size */
+ { 0xd1, LVL_3, 1024 }, /* 4-way set assoc, 64 byte line size */
+ { 0xd2, LVL_3, 2048 }, /* 4-way set assoc, 64 byte line size */
+ { 0xd6, LVL_3, 1024 }, /* 8-way set assoc, 64 byte line size */
+ { 0xd7, LVL_3, 2038 }, /* 8-way set assoc, 64 byte line size */
+ { 0xd8, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */
+ { 0xdc, LVL_3, 2048 }, /* 12-way set assoc, 64 byte line size */
+ { 0xdd, LVL_3, 4096 }, /* 12-way set assoc, 64 byte line size */
+ { 0xde, LVL_3, 8192 }, /* 12-way set assoc, 64 byte line size */
+ { 0xe2, LVL_3, 2048 }, /* 16-way set assoc, 64 byte line size */
+ { 0xe3, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size */
+ { 0xe4, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */
{ 0x00, 0, 0}
};
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index e28c7a9..a134621 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -346,6 +346,7 @@
popq_cfi %rax /* move return address... */
mov %gs:pda_irqstackptr,%rsp
EMPTY_FRAME 0
+ pushq_cfi %rbp /* backlink for unwinder */
pushq_cfi %rax /* ... to the new stack */
/*
* We entered an interrupt context - irqs are off:
diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c
index 1c4a130..9b0c480 100644
--- a/arch/x86/kernel/io_apic.c
+++ b/arch/x86/kernel/io_apic.c
@@ -2528,14 +2528,15 @@
vector = ~get_irq_regs()->orig_ax;
me = smp_processor_id();
+
+ if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
*descp = desc = move_irq_desc(desc, me);
/* get the new one */
cfg = desc->chip_data;
#endif
-
- if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
send_cleanup_vector(cfg);
+ }
}
#else
static inline void irq_complete_move(struct irq_desc **descp) {}
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c
index 1507ad4e..10a09c2 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit_32.c
@@ -78,15 +78,6 @@
}
}
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .mask = CPU_MASK_NONE,
- .name = "cascade",
-};
-
DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
[0 ... IRQ0_VECTOR - 1] = -1,
[IRQ0_VECTOR] = 0,
@@ -178,9 +169,6 @@
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-
/* setup after call gates are initialised (usually add in
* the architecture specific gates)
*/
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index df167f2..a265a7c 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -38,6 +38,15 @@
init_ISA_irqs();
}
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+
/**
* intr_init_hook - post gate setup interrupt initialisation
*
@@ -53,6 +62,9 @@
if (x86_quirks->arch_intr_init())
return;
}
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+
}
/**
diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c
index a580b95..d914a79 100644
--- a/arch/x86/mach-voyager/setup.c
+++ b/arch/x86/mach-voyager/setup.c
@@ -33,13 +33,23 @@
setup_irq(2, &irq2);
}
-void __init pre_setup_arch_hook(void)
+static void voyager_disable_tsc(void)
{
/* Voyagers run their CPUs from independent clocks, so disable
* the TSC code because we can't sync them */
setup_clear_cpu_cap(X86_FEATURE_TSC);
}
+void __init pre_setup_arch_hook(void)
+{
+ voyager_disable_tsc();
+}
+
+void __init pre_time_init_hook(void)
+{
+ voyager_disable_tsc();
+}
+
void __init trap_init_hook(void)
{
}
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 9840b7e..7ffcdee 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -81,7 +81,7 @@
static void disable_local_vic_irq(unsigned int irq);
static void before_handle_vic_irq(unsigned int irq);
static void after_handle_vic_irq(unsigned int irq);
-static void set_vic_irq_affinity(unsigned int irq, cpumask_t mask);
+static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask);
static void ack_vic_irq(unsigned int irq);
static void vic_enable_cpi(void);
static void do_boot_cpu(__u8 cpuid);
@@ -211,8 +211,6 @@
static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
/* This is for the new dynamic CPU boot code */
-cpumask_t cpu_callin_map = CPU_MASK_NONE;
-cpumask_t cpu_callout_map = CPU_MASK_NONE;
/* The per processor IRQ masks (these are usually kept in sync) */
static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned;
@@ -378,7 +376,7 @@
cpus_addr(phys_cpu_present_map)[0] |=
voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK +
3) << 24;
- cpu_possible_map = phys_cpu_present_map;
+ init_cpu_possible(&phys_cpu_present_map);
printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n",
cpus_addr(phys_cpu_present_map)[0]);
/* Here we set up the VIC to enable SMP */
@@ -1599,16 +1597,16 @@
* change the mask and then do an interrupt enable CPI to re-enable on
* the selected processors */
-void set_vic_irq_affinity(unsigned int irq, cpumask_t mask)
+void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
/* Only extended processors handle interrupts */
unsigned long real_mask;
unsigned long irq_mask = 1 << irq;
int cpu;
- real_mask = cpus_addr(mask)[0] & voyager_extended_vic_processors;
+ real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors;
- if (cpus_addr(mask)[0] == 0)
+ if (cpus_addr(*mask)[0] == 0)
/* can't have no CPUs to accept the interrupt -- extremely
* bad things will happen */
return;
@@ -1750,10 +1748,11 @@
init_gdt(smp_processor_id());
switch_to_new_gdt();
- cpu_set(smp_processor_id(), cpu_online_map);
- cpu_set(smp_processor_id(), cpu_callout_map);
- cpu_set(smp_processor_id(), cpu_possible_map);
- cpu_set(smp_processor_id(), cpu_present_map);
+ cpu_online_map = cpumask_of_cpu(smp_processor_id());
+ cpu_callout_map = cpumask_of_cpu(smp_processor_id());
+ cpu_callin_map = CPU_MASK_NONE;
+ cpu_present_map = cpumask_of_cpu(smp_processor_id());
+
}
static int __cpuinit voyager_cpu_up(unsigned int cpu)
@@ -1783,9 +1782,9 @@
x86_write_percpu(cpu_number, hard_smp_processor_id());
}
-static void voyager_send_call_func(cpumask_t callmask)
+static void voyager_send_call_func(const struct cpumask *callmask)
{
- __u32 mask = cpus_addr(callmask)[0] & ~(1 << smp_processor_id());
+ __u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id());
send_CPI(mask, VIC_CALL_FUNCTION_CPI);
}
diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h
index 8589382..fa3e107 100644
--- a/arch/x86/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
@@ -19,8 +19,10 @@
paired with xen_mc_issue() */
static inline void xen_mc_batch(void)
{
+ unsigned long flags;
/* need to disable interrupts until this entry is complete */
- local_irq_save(__get_cpu_var(xen_mc_irq_flags));
+ local_irq_save(flags);
+ __get_cpu_var(xen_mc_irq_flags) = flags;
}
static inline struct multicall_space xen_mc_entry(size_t args)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 77bba4c..a603bbf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -61,9 +61,14 @@
#define EM_MSG_LED_VALUE_ON 0x00010000
static int ahci_skip_host_reset;
+static int ahci_ignore_sss;
+
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
@@ -2692,8 +2697,10 @@
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
- if (!(hpriv->cap & HOST_CAP_SSS))
+ if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
+ else
+ printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 88c2428..9fbf059 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -164,6 +164,11 @@
MODULE_VERSION(DRV_VERSION);
+static bool ata_sstatus_online(u32 sstatus)
+{
+ return (sstatus & 0xf) == 0x3;
+}
+
/**
* ata_link_next - link iteration helper
* @link: the previous link, NULL to start
@@ -1015,18 +1020,6 @@
return spd_str[spd - 1];
}
-void ata_dev_disable(struct ata_device *dev)
-{
- if (ata_dev_enabled(dev)) {
- if (ata_msg_drv(dev->link->ap))
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
- ata_acpi_on_disable(dev);
- ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
- ATA_DNXFER_QUIET);
- dev->class++;
- }
-}
-
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
struct ata_link *link = dev->link;
@@ -2239,6 +2232,40 @@
return rc;
}
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+ struct ata_link *plink = ata_dev_phys_link(dev);
+ u32 target, target_limit;
+
+ if (!sata_scr_valid(plink))
+ return 0;
+
+ if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+ target = 1;
+ else
+ return 0;
+
+ target_limit = (1 << target) - 1;
+
+ /* if already on stricter limit, no need to push further */
+ if (plink->sata_spd_limit <= target_limit)
+ return 0;
+
+ plink->sata_spd_limit = target_limit;
+
+ /* Request another EH round by returning -EAGAIN if link is
+ * going faster than the target speed. Forward progress is
+ * guaranteed by setting sata_spd_limit to target_limit above.
+ */
+ if (plink->sata_spd > target) {
+ ata_dev_printk(dev, KERN_INFO,
+ "applying link speed limit horkage to %s\n",
+ sata_spd_string(target));
+ return -EAGAIN;
+ }
+ return 0;
+}
+
static inline u8 ata_dev_knobble(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
@@ -2329,6 +2356,10 @@
return 0;
}
+ rc = ata_do_link_spd_horkage(dev);
+ if (rc)
+ return rc;
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
@@ -2784,7 +2815,7 @@
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(&ap->link);
+ sata_down_spd_limit(&ap->link, 0);
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
@@ -2880,21 +2911,27 @@
/**
* sata_down_spd_limit - adjust SATA spd limit downward
* @link: Link to adjust SATA spd limit for
+ * @spd_limit: Additional limit
*
* Adjust SATA spd limit of @link downward. Note that this
* function only adjusts the limit. The change must be applied
* using sata_set_spd().
*
+ * If @spd_limit is non-zero, the speed is limited to equal to or
+ * lower than @spd_limit if such speed is supported. If
+ * @spd_limit is slower than any supported speed, only the lowest
+ * supported speed is allowed.
+ *
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
{
u32 sstatus, spd, mask;
- int rc, highbit;
+ int rc, bit;
if (!sata_scr_valid(link))
return -EOPNOTSUPP;
@@ -2903,7 +2940,7 @@
* If not, use cached value in link->sata_spd.
*/
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
- if (rc == 0)
+ if (rc == 0 && ata_sstatus_online(sstatus))
spd = (sstatus >> 4) & 0xf;
else
spd = link->sata_spd;
@@ -2913,8 +2950,8 @@
return -EINVAL;
/* unconditionally mask off the highest bit */
- highbit = fls(mask) - 1;
- mask &= ~(1 << highbit);
+ bit = fls(mask) - 1;
+ mask &= ~(1 << bit);
/* Mask off all speeds higher than or equal to the current
* one. Force 1.5Gbps if current SPD is not available.
@@ -2928,6 +2965,15 @@
if (!mask)
return -EINVAL;
+ if (spd_limit) {
+ if (mask & ((1 << spd_limit) - 1))
+ mask &= (1 << spd_limit) - 1;
+ else {
+ bit = ffs(mask) - 1;
+ mask = 1 << bit;
+ }
+ }
+
link->sata_spd_limit = mask;
ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
@@ -4215,6 +4261,9 @@
/* Devices that do not need bridging limits applied */
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
+ /* Devices which aren't very happy with higher link speeds */
+ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
+
/* End Marker */
{ }
};
@@ -4709,8 +4758,7 @@
/**
* ata_qc_new - Request an available ATA command, for queueing
- * @ap: Port associated with device @dev
- * @dev: Device from whom we request an available command structure
+ * @ap: target port
*
* LOCKING:
* None.
@@ -5175,7 +5223,7 @@
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) == 0x3)
+ ata_sstatus_online(sstatus))
return true;
return false;
}
@@ -5199,7 +5247,7 @@
u32 sstatus;
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
- (sstatus & 0xf) != 0x3)
+ !ata_sstatus_online(sstatus))
return true;
return false;
}
@@ -5412,8 +5460,8 @@
dev->horkage = 0;
spin_unlock_irqrestore(ap->lock, flags);
- memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
- sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+ memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+ ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8147a83..ce2ef04 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -82,6 +82,10 @@
ATA_EH_FASTDRAIN_INTERVAL = 3000,
ATA_EH_UA_TRIES = 5,
+
+ /* probe speed down parameters, see ata_eh_schedule_probe() */
+ ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */
+ ATA_EH_PROBE_TRIALS = 2,
};
/* The following table determines how we sequence resets. Each entry
@@ -1176,6 +1180,32 @@
}
/**
+ * ata_dev_disable - disable ATA device
+ * @dev: ATA device to disable
+ *
+ * Disable @dev.
+ *
+ * Locking:
+ * EH context.
+ */
+void ata_dev_disable(struct ata_device *dev)
+{
+ if (!ata_dev_enabled(dev))
+ return;
+
+ if (ata_msg_drv(dev->link->ap))
+ ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_acpi_on_disable(dev);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
+ dev->class++;
+
+ /* From now till the next successful probe, ering is used to
+ * track probe failures. Clear accumulated device error info.
+ */
+ ata_ering_clear(&dev->ering);
+}
+
+/**
* ata_eh_detach_dev - detach ATA device
* @dev: ATA device to detach
*
@@ -1849,7 +1879,7 @@
/* speed down? */
if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
/* speed down SATA link speed if possible */
- if (sata_down_spd_limit(link) == 0) {
+ if (sata_down_spd_limit(link, 0) == 0) {
action |= ATA_EH_RESET;
goto done;
}
@@ -2601,11 +2631,11 @@
}
if (try == max_tries - 1) {
- sata_down_spd_limit(link);
+ sata_down_spd_limit(link, 0);
if (slave)
- sata_down_spd_limit(slave);
+ sata_down_spd_limit(slave, 0);
} else if (rc == -EPIPE)
- sata_down_spd_limit(failed_link);
+ sata_down_spd_limit(failed_link, 0);
if (hardreset)
reset = hardreset;
@@ -2744,6 +2774,8 @@
readid_flags, dev->id);
switch (rc) {
case 0:
+ /* clear error info accumulated during probe */
+ ata_ering_clear(&dev->ering);
new_mask |= 1 << dev->devno;
break;
case -ENOENT:
@@ -2947,9 +2979,24 @@
return 1;
}
+static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
+{
+ u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
+ u64 now = get_jiffies_64();
+ int *trials = void_arg;
+
+ if (ent->timestamp < now - min(now, interval))
+ return -1;
+
+ (*trials)++;
+ return 0;
+}
+
static int ata_eh_schedule_probe(struct ata_device *dev)
{
struct ata_eh_context *ehc = &dev->link->eh_context;
+ struct ata_link *link = ata_dev_phys_link(dev);
+ int trials = 0;
if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
(ehc->did_probe_mask & (1 << dev->devno)))
@@ -2962,6 +3009,25 @@
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
+ /* Record and count probe trials on the ering. The specific
+ * error mask used is irrelevant. Because a successful device
+ * detection clears the ering, this count accumulates only if
+ * there are consecutive failed probes.
+ *
+ * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
+ * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
+ * forced to 1.5Gbps.
+ *
+ * This is to work around cases where failed link speed
+ * negotiation results in device misdetection leading to
+ * infinite DEVXCHG or PHRDY CHG events.
+ */
+ ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
+ ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
+
+ if (trials > ATA_EH_PROBE_TRIALS)
+ sata_down_spd_limit(link, 1);
+
return 1;
}
@@ -2969,7 +3035,11 @@
{
struct ata_eh_context *ehc = &dev->link->eh_context;
- ehc->tries[dev->devno]--;
+ /* -EAGAIN from EH routine indicates retry without prejudice.
+ * The requester is responsible for ensuring forward progress.
+ */
+ if (err != -EAGAIN)
+ ehc->tries[dev->devno]--;
switch (err) {
case -ENODEV:
@@ -2979,12 +3049,13 @@
/* give it just one more chance */
ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
case -EIO:
- if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+ if (ehc->tries[dev->devno] == 1) {
/* This is the last chance, better to slow
* down than lose it.
*/
- sata_down_spd_limit(ata_dev_phys_link(dev));
- ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ sata_down_spd_limit(ata_dev_phys_link(dev), 0);
+ if (dev->pio_mode > XFER_PIO_0)
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 98ca07a..619f2c3 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -729,7 +729,7 @@
if (tries) {
/* consecutive revalidation failures? speed down */
if (reval_failed)
- sata_down_spd_limit(link);
+ sata_down_spd_limit(link, 0);
else
reval_failed = 1;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3c4c5ae..b9747fa 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,7 @@
/**
* ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+ * @ap: target port
* @sdev: SCSI device to get identify data for
* @arg: User buffer area for identify data
*
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index fe2839e..cea8014 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -79,7 +79,6 @@
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_dev_disable(struct ata_device *dev);
extern void ata_pio_queue_task(struct ata_port *ap, void *data,
unsigned long delay);
extern void ata_port_flush_task(struct ata_port *ap);
@@ -100,7 +99,7 @@
extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags);
extern int ata_dev_configure(struct ata_device *dev);
-extern int sata_down_spd_limit(struct ata_link *link);
+extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
extern void ata_sg_clean(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -160,6 +159,7 @@
extern void ata_port_wait_eh(struct ata_port *ap);
extern void ata_eh_fastdrain_timerfn(unsigned long arg);
extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+extern void ata_dev_disable(struct ata_device *dev);
extern void ata_eh_detach_dev(struct ata_device *dev);
extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
unsigned int action);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 3080f37..f1b26f7 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -12,7 +12,7 @@
*
* Probe code based on drivers/ide/legacy/qd65xx.c
* Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@fnac.net>
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
*/
#include <linux/kernel.h>
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f2d8a020..4ae1a41 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -663,8 +663,8 @@
{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
/* RocketRAID 1720/174x have different identifiers */
{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
- { PCI_VDEVICE(TTI, 0x1740), chip_508x },
- { PCI_VDEVICE(TTI, 0x1742), chip_508x },
+ { PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+ { PCI_VDEVICE(TTI, 0x1742), chip_6042 },
{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index c49ad0e..444af04 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -436,11 +436,16 @@
.hardreset = nv_noclassify_hardreset,
};
-/* CK804 finally gets hardreset right */
+/* For initial probing after boot and hot plugging, hardreset mostly
+ * works fine on CK804 but curiously, reprobing on the initial port by
+ * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
+ * in somewhat undeterministic way. Use noclassify hardreset.
+ */
static struct ata_port_operations nv_ck804_ops = {
.inherits = &nv_common_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
+ .hardreset = nv_noclassify_hardreset,
.host_stop = nv_ck804_host_stop,
};
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 9f02959..d009160 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -324,7 +324,7 @@
prd->addr = cpu_to_le32(addr);
prd->flags_len = cpu_to_le32(sg_len);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
last_prd = prd;
prd++;
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index f5be808..735bbe2 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -761,7 +761,7 @@
config NVRAM
tristate "/dev/nvram support"
- depends on ATARI || X86 || ARM || GENERIC_NVRAM
+ depends on ATARI || X86 || (ARM && RTC_DRV_CMOS) || GENERIC_NVRAM
---help---
If you say Y here and create a character special file /dev/nvram
with major number 10 and minor number 144 using mknod ("man mknod"),
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index b60be7b..f146e90 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1713,8 +1713,8 @@
for (i = 0; i < SX_NBOARDS; i++)
sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
- unlock_kernel();
- return -EIO;
+ rc = -EIO;
+ goto out;
}
switch (cmd) {
@@ -1747,7 +1747,8 @@
break;
case SXIO_DO_RAMTEST:
if (sx_initialized) /* Already initialized: better not ramtest the board. */
- return -EPERM;
+ rc = -EPERM;
+ break;
if (IS_SX_BOARD(board)) {
rc = do_memtest(board, 0, 0x7000);
if (!rc)
@@ -1844,6 +1845,7 @@
rc = -ENOTTY;
break;
}
+out:
unlock_kernel();
func_exit();
return rc;
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 0370524..abf4dfc 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -153,7 +153,10 @@
static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_rotated_right = {2, -1, 3};
+static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3};
#define AXIS_DMI_MATCH(_ident, _name, _axis) { \
.ident = _ident, \
@@ -172,10 +175,12 @@
AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
+ AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
+ AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
- * "NC651xx" "HP Compaq 651"
- * "NC671xx" "HP Compaq 671"
* "NC6910" "HP Compaq 6910"
* HP Compaq 8710x Notebook PC / Mobile Workstation
* "NC2400" "HP Compaq nc2400"
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
index 5b2e3af4..08c4fa3 100644
--- a/drivers/ide/qd65xx.c
+++ b/drivers/ide/qd65xx.c
@@ -16,7 +16,7 @@
/*
* Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@fnac.net>
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
*/
#include <linux/module.h>
diff --git a/drivers/ide/qd65xx.h b/drivers/ide/qd65xx.h
index 6636f96..d7e67a1 100644
--- a/drivers/ide/qd65xx.h
+++ b/drivers/ide/qd65xx.h
@@ -4,7 +4,7 @@
/*
* Authors: Petr Soucek <petr@ryston.cz>
- * Samuel Thibault <samuel.thibault@fnac.net>
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
*/
/* truncates a in [b,c] */
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 24508e2..ea9488e 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -626,7 +626,6 @@
}
if (client->irq) {
- set_irq_handler(client->irq, handle_level_irq);
ret = request_irq(client->irq, pcf50633_irq,
IRQF_TRIGGER_LOW, "pcf50633", pcf);
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 5607319..c64e679 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -217,6 +217,7 @@
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL
+ depends on POWER_SUPPLY
default n
---help---
This driver adds support for rfkill and backlight control to Dell
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index bf5e4d0..558bf3f 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -35,7 +35,7 @@
if (!ssc_valid) {
spin_unlock(&user_lock);
- dev_dbg(&ssc->pdev->dev, "could not find requested device\n");
+ pr_err("ssc: ssc%d platform device is missing\n", ssc_num);
return ERR_PTR(-ENODEV);
}
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 10c421b..f26667a 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -207,7 +207,7 @@
&device_ccb->recv_ctrl);
/* give iLO some time to process stop request */
- for (retries = 1000; retries > 0; retries--) {
+ for (retries = MAX_WAIT; retries > 0; retries--) {
doorbell_set(driver_ccb);
udelay(1);
if (!(ioread32(&device_ccb->send_ctrl) & (1 << CTRL_BITPOS_A))
@@ -309,7 +309,7 @@
doorbell_clr(driver_ccb);
/* make sure iLO is really handling requests */
- for (i = 1000; i > 0; i--) {
+ for (i = MAX_WAIT; i > 0; i--) {
if (ilo_pkt_dequeue(hw, driver_ccb, SENDQ, &pkt_id, NULL, NULL))
break;
udelay(1);
@@ -326,7 +326,7 @@
return 0;
free:
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ ilo_ccb_close(pdev, data);
out:
return error;
}
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index a281207..b64a20e 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -19,6 +19,8 @@
#define MAX_ILO_DEV 1
/* max number of files */
#define MAX_OPEN (MAX_CCB * MAX_ILO_DEV)
+/* spin counter for open/close delay */
+#define MAX_WAIT 10000
/*
* Per device, used to track global memory allocations.
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index a5bd658..275b788 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -514,7 +514,8 @@
/* partition's notify mq */
struct xpc_send_msg_slot_uv *send_msg_slots;
- struct xpc_notify_mq_msg_uv *recv_msg_slots;
+ void *recv_msg_slots; /* each slot will hold a xpc_notify_mq_msg_uv */
+ /* structure plus the user's payload */
struct xpc_fifo_head_uv msg_slot_free_list;
struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index f17f7d4..29c0502 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -3,7 +3,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
@@ -1010,8 +1010,8 @@
continue;
for (entry = 0; entry < nentries; entry++) {
- msg_slot = ch_uv->recv_msg_slots + entry *
- ch->entry_size;
+ msg_slot = ch_uv->recv_msg_slots +
+ entry * ch->entry_size;
msg_slot->hdr.msg_slot_number = entry;
}
@@ -1308,9 +1308,8 @@
/* we're dealing with a normal message sent via the notify_mq */
ch_uv = &ch->sn.uv;
- msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots +
- (msg->hdr.msg_slot_number % ch->remote_nentries) *
- ch->entry_size);
+ msg_slot = ch_uv->recv_msg_slots +
+ (msg->hdr.msg_slot_number % ch->remote_nentries) * ch->entry_size;
BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number);
BUG_ON(msg_slot->hdr.size != 0);
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c
index 7df6bbf..6f6a0f6 100644
--- a/drivers/mtd/maps/sa1100-flash.c
+++ b/drivers/mtd/maps/sa1100-flash.c
@@ -453,7 +453,7 @@
.resume = sa1100_mtd_resume,
.shutdown = sa1100_mtd_shutdown,
.driver = {
- .name = "flash",
+ .name = "sa1100-mtd",
.owner = THIS_MODULE,
},
};
@@ -474,4 +474,4 @@
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("SA1100 CFI map driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:flash");
+MODULE_ALIAS("platform:sa1100-mtd");
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index d15d8b7..54b52e5 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,7 +646,7 @@
.ndo_get_stats = ei_get_stats,
.ndo_set_multicast_list = ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_set_mac_addr,
+ .ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ei_poll,
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index de91dda..f41135f 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -463,9 +463,11 @@
return 0;
register_wwan_err:
- rfkill_unregister(bluetooth_rfkill);
+ if (bluetooth_rfkill)
+ rfkill_unregister(bluetooth_rfkill);
register_bluetooth_error:
- rfkill_unregister(wifi_rfkill);
+ if (wifi_rfkill)
+ rfkill_unregister(wifi_rfkill);
add_sysfs_error:
cleanup_sysfs(device);
return err;
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index cced4d1..81450fb 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -241,6 +241,12 @@
If you say Y here you will get support for the
watchdog timer in the ST M41T60 and M41T80 RTC chips series.
+config RTC_DRV_DM355EVM
+ tristate "TI DaVinci DM355 EVM RTC"
+ depends on MFD_DM355EVM_MSP
+ help
+ Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
config RTC_DRV_TWL92330
boolean "TI TWL92330/Menelaus"
depends on MENELAUS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 6e28021..0e697aa 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
obj-$(CONFIG_RTC_DRV_CMOS) += rtc-cmos.o
+obj-$(CONFIG_RTC_DRV_DM355EVM) += rtc-dm355evm.o
obj-$(CONFIG_RTC_DRV_DS1216) += rtc-ds1216.o
obj-$(CONFIG_RTC_DRV_DS1286) += rtc-ds1286.o
obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o
diff --git a/drivers/rtc/rtc-dm355evm.c b/drivers/rtc/rtc-dm355evm.c
new file mode 100644
index 0000000..58d4e18
--- /dev/null
+++ b/drivers/rtc/rtc-dm355evm.c
@@ -0,0 +1,175 @@
+/*
+ * rtc-dm355evm.c - access battery-backed counter in MSP430 firmware
+ *
+ * Copyright (c) 2008 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/dm355evm_msp.h>
+
+
+/*
+ * The MSP430 firmware on the DM355 EVM uses a watch crystal to feed
+ * a 1 Hz counter. When a backup battery is supplied, that makes a
+ * reasonable RTC for applications where alarms and non-NTP drift
+ * compensation aren't important.
+ *
+ * The only real glitch is the inability to read or write all four
+ * counter bytes atomically: the count may increment in the middle
+ * of an operation, causing trouble when the LSB rolls over.
+ *
+ * This driver was tested with firmware revision A4.
+ */
+union evm_time {
+ u8 bytes[4];
+ u32 value;
+};
+
+static int dm355evm_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ union evm_time time;
+ int status;
+ int tries = 0;
+
+ do {
+ /*
+ * Read LSB(0) to MSB(3) bytes. Defend against the counter
+ * rolling over by re-reading until the value is stable,
+ * and assuming the four reads take at most a few seconds.
+ */
+ status = dm355evm_msp_read(DM355EVM_MSP_RTC_0);
+ if (status < 0)
+ return status;
+ if (tries && time.bytes[0] == status)
+ break;
+ time.bytes[0] = status;
+
+ status = dm355evm_msp_read(DM355EVM_MSP_RTC_1);
+ if (status < 0)
+ return status;
+ if (tries && time.bytes[1] == status)
+ break;
+ time.bytes[1] = status;
+
+ status = dm355evm_msp_read(DM355EVM_MSP_RTC_2);
+ if (status < 0)
+ return status;
+ if (tries && time.bytes[2] == status)
+ break;
+ time.bytes[2] = status;
+
+ status = dm355evm_msp_read(DM355EVM_MSP_RTC_3);
+ if (status < 0)
+ return status;
+ if (tries && time.bytes[3] == status)
+ break;
+ time.bytes[3] = status;
+
+ } while (++tries < 5);
+
+ dev_dbg(dev, "read timestamp %08x\n", time.value);
+
+ rtc_time_to_tm(le32_to_cpu(time.value), tm);
+ return 0;
+}
+
+static int dm355evm_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ union evm_time time;
+ unsigned long value;
+ int status;
+
+ rtc_tm_to_time(tm, &value);
+ time.value = cpu_to_le32(value);
+
+ dev_dbg(dev, "write timestamp %08x\n", time.value);
+
+ /*
+ * REVISIT handle non-atomic writes ... maybe just retry until
+ * byte[1] sticks (no rollover)?
+ */
+ status = dm355evm_msp_write(time.bytes[0], DM355EVM_MSP_RTC_0);
+ if (status < 0)
+ return status;
+
+ status = dm355evm_msp_write(time.bytes[1], DM355EVM_MSP_RTC_1);
+ if (status < 0)
+ return status;
+
+ status = dm355evm_msp_write(time.bytes[2], DM355EVM_MSP_RTC_2);
+ if (status < 0)
+ return status;
+
+ status = dm355evm_msp_write(time.bytes[3], DM355EVM_MSP_RTC_3);
+ if (status < 0)
+ return status;
+
+ return 0;
+}
+
+static struct rtc_class_ops dm355evm_rtc_ops = {
+ .read_time = dm355evm_rtc_read_time,
+ .set_time = dm355evm_rtc_set_time,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit dm355evm_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *rtc;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &dm355evm_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
+ PTR_ERR(rtc));
+ return PTR_ERR(rtc);
+ }
+ platform_set_drvdata(pdev, rtc);
+
+ return 0;
+}
+
+static int __devexit dm355evm_rtc_remove(struct platform_device *pdev)
+{
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+
+ rtc_device_unregister(rtc);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+/*
+ * I2C is used to talk to the MSP430, but this platform device is
+ * exposed by an MFD driver that manages I2C communications.
+ */
+static struct platform_driver rtc_dm355evm_driver = {
+ .probe = dm355evm_rtc_probe,
+ .remove = __devexit_p(dm355evm_rtc_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "rtc-dm355evm",
+ },
+};
+
+static int __init dm355evm_rtc_init(void)
+{
+ return platform_driver_register(&rtc_dm355evm_driver);
+}
+module_init(dm355evm_rtc_init);
+
+static void __exit dm355evm_rtc_exit(void)
+{
+ platform_driver_unregister(&rtc_dm355evm_driver);
+}
+module_exit(dm355evm_rtc_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c
index e54b5c6..e01b955 100644
--- a/drivers/rtc/rtc-ds1390.c
+++ b/drivers/rtc/rtc-ds1390.c
@@ -122,7 +122,6 @@
static int __devinit ds1390_probe(struct spi_device *spi)
{
- struct rtc_device *rtc;
unsigned char tmp;
struct ds1390 *chip;
int res;
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index db16112..fb2b0f5 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -1475,7 +1475,7 @@
aty128_set_pll(&par->pll, par);
aty128_set_fifo(&par->fifo_reg, par);
- config = aty_ld_le32(CONFIG_CNTL) & ~3;
+ config = aty_ld_le32(CNFG_CNTL) & ~3;
#if defined(__BIG_ENDIAN)
if (par->crtc.bpp == 32)
@@ -1484,7 +1484,7 @@
config |= 1; /* make aperture do 16 bit swapping */
#endif
- aty_st_le32(CONFIG_CNTL, config);
+ aty_st_le32(CNFG_CNTL, config);
aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
@@ -1875,7 +1875,7 @@
u32 dac;
/* Get the chip revision */
- chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+ chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
strcpy(video_card, "Rage128 XX ");
video_card[8] = ent->device >> 8;
@@ -2057,7 +2057,7 @@
/* Grab memory size from the card */
// How does this relate to the resource length from the PCI hardware?
- par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+ par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
/* Virtualize the framebuffer */
info->screen_base = ioremap(fb_addr, par->vram_size);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index cc6b470..1d6e16d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -135,7 +135,7 @@
#if defined(CONFIG_PM) || defined(CONFIG_PMAC_BACKLIGHT) || \
defined (CONFIG_FB_ATY_GENERIC_LCD) || defined(CONFIG_FB_ATY_BACKLIGHT)
static const u32 lt_lcd_regs[] = {
- CONFIG_PANEL_LG,
+ CNFG_PANEL_LG,
LCD_GEN_CNTL_LG,
DSTN_CONTROL_LG,
HFB_PITCH_ADDR_LG,
@@ -446,7 +446,7 @@
par->pll_limits.ecp_max = aty_chips[i].ecp_max;
par->features = aty_chips[i].features;
- chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+ chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
type = chip_id & CFG_CHIP_TYPE;
rev = (chip_id & CFG_CHIP_REV) >> 24;
@@ -629,7 +629,7 @@
crtc->lcd_index = aty_ld_le32(LCD_INDEX, par);
aty_st_le32(LCD_INDEX, crtc->lcd_index, par);
}
- crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par);
+ crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par);
crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par);
@@ -676,7 +676,7 @@
aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl & ~(CRTC_EXT_DISP_EN | CRTC_EN), par);
/* update non-shadow registers first */
- aty_st_lcd(CONFIG_PANEL, crtc->lcd_config_panel, par);
+ aty_st_lcd(CNFG_PANEL, crtc->lcd_config_panel, par);
aty_st_lcd(LCD_GEN_CNTL, crtc->lcd_gen_cntl &
~(CRTC_RW_SELECT | SHADOW_EN | SHADOW_RW_EN), par);
@@ -858,7 +858,7 @@
if (!M64_HAS(MOBIL_BUS))
crtc->lcd_index |= CRTC2_DISPLAY_DIS;
- crtc->lcd_config_panel = aty_ld_lcd(CONFIG_PANEL, par) | 0x4000;
+ crtc->lcd_config_panel = aty_ld_lcd(CNFG_PANEL, par) | 0x4000;
crtc->lcd_gen_cntl = aty_ld_lcd(LCD_GEN_CNTL, par) & ~CRTC_RW_SELECT;
crtc->lcd_gen_cntl &=
@@ -2254,7 +2254,7 @@
if (!M64_HAS(INTEGRATED)) {
u32 stat0;
u8 dac_type, dac_subtype, clk_type;
- stat0 = aty_ld_le32(CONFIG_STAT0, par);
+ stat0 = aty_ld_le32(CNFG_STAT0, par);
par->bus_type = (stat0 >> 0) & 0x07;
par->ram_type = (stat0 >> 3) & 0x07;
ramname = aty_gx_ram[par->ram_type];
@@ -2324,7 +2324,7 @@
par->dac_ops = &aty_dac_ct;
par->pll_ops = &aty_pll_ct;
par->bus_type = PCI;
- par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
+ par->ram_type = (aty_ld_le32(CNFG_STAT0, par) & 0x07);
ramname = aty_ct_ram[par->ram_type];
/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
if (par->pll_limits.mclk == 67 && par->ram_type < SDRAM)
@@ -2433,7 +2433,7 @@
}
if (M64_HAS(MAGIC_VRAM_SIZE)) {
- if (aty_ld_le32(CONFIG_STAT1, par) & 0x40000000)
+ if (aty_ld_le32(CNFG_STAT1, par) & 0x40000000)
info->fix.smem_len += 0x400000;
}
@@ -2946,7 +2946,7 @@
* Fix PROMs idea of MEM_CNTL settings...
*/
mem = aty_ld_le32(MEM_CNTL, par);
- chip_id = aty_ld_le32(CONFIG_CHIP_ID, par);
+ chip_id = aty_ld_le32(CNFG_CHIP_ID, par);
if (((chip_id & CFG_CHIP_TYPE) == VT_CHIP_ID) && !((chip_id >> 24) & 1)) {
switch (mem & 0x0f) {
case 3:
@@ -2964,7 +2964,7 @@
default:
break;
}
- if ((aty_ld_le32(CONFIG_STAT0, par) & 7) >= SDRAM)
+ if ((aty_ld_le32(CNFG_STAT0, par) & 7) >= SDRAM)
mem &= ~(0x00700000);
}
mem &= ~(0xcf80e000); /* Turn off all undocumented bits. */
@@ -3572,7 +3572,7 @@
}
/* Fake pci_id for correct_chipset() */
- switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+ switch (aty_ld_le32(CNFG_CHIP_ID, par) & CFG_CHIP_TYPE) {
case 0x00d7:
par->pci_id = PCI_CHIP_MACH64GX;
break;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index d0f1a7f..16bb7e3 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -1936,8 +1936,8 @@
OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B);
mdelay(100);
- aper_base = INREG(CONFIG_APER_0_BASE);
- aper_size = INREG(CONFIG_APER_SIZE);
+ aper_base = INREG(CNFG_APER_0_BASE);
+ aper_size = INREG(CNFG_APER_SIZE);
#ifdef SET_MC_FB_FROM_APERTURE
/* Set framebuffer to be at the same address as set in PCI BAR */
@@ -2024,11 +2024,11 @@
~CRTC_H_CUTOFF_ACTIVE_EN);
}
} else {
- tmp = INREG(CONFIG_MEMSIZE);
+ tmp = INREG(CNFG_MEMSIZE);
}
/* mem size is bits [28:0], mask off the rest */
- rinfo->video_ram = tmp & CONFIG_MEMSIZE_MASK;
+ rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK;
/*
* Hack to get around some busted production M6's
@@ -2228,7 +2228,7 @@
*/
rinfo->errata = 0;
if (rinfo->family == CHIP_FAMILY_R300 &&
- (INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK)
+ (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK)
== CFG_ATI_REV_A11)
rinfo->errata |= CHIP_ERRATA_R300_CG;
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 675abda..c4ac2a0 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -333,7 +333,7 @@
if (!rinfo->has_CRTC2) {
tmp = INPLL(pllSCLK_CNTL);
- if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
+ if ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB);
tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 |
SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE |
@@ -468,9 +468,9 @@
/*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/
if ((rinfo->family == CHIP_FAMILY_RV250 &&
- ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
+ ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
((rinfo->family == CHIP_FAMILY_RV100) &&
- ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
+ ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
tmp |= SCLK_CNTL__FORCE_CP;
tmp |= SCLK_CNTL__FORCE_VIP;
}
@@ -486,7 +486,7 @@
/* RV200::A11 A12 RV250::A11 A12 */
if (((rinfo->family == CHIP_FAMILY_RV200) ||
(rinfo->family == CHIP_FAMILY_RV250)) &&
- ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
+ ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
tmp |= SCLK_MORE_CNTL__FORCEON;
OUTPLL(pllSCLK_MORE_CNTL, tmp);
@@ -497,7 +497,7 @@
/* RV200::A11 A12, RV250::A11 A12 */
if (((rinfo->family == CHIP_FAMILY_RV200) ||
(rinfo->family == CHIP_FAMILY_RV250)) &&
- ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
+ ((INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
tmp = INPLL(pllPLL_PWRMGT_CNTL);
tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE;
OUTPLL(pllPLL_PWRMGT_CNTL, tmp);
@@ -702,7 +702,7 @@
OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
- OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+ OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
@@ -1723,7 +1723,7 @@
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
- OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+ OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
OUTREG(BUS_CNTL, rinfo->save_regs[36]);
OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
@@ -1961,7 +1961,7 @@
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/);
OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/);
OUTREG(MC_IND_INDEX, 0);
- OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+ OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
mdelay(20);
}
@@ -2361,7 +2361,7 @@
OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249);
OUTREG(MC_IND_INDEX, 0);
- OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
+ OUTREG(CNFG_MEMSIZE, rinfo->video_ram);
radeon_pm_full_reset_sdram(rinfo);
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 363b3cb..63d7594 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -18,7 +18,7 @@
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
-obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o
+obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x_bl.c
similarity index 100%
rename from drivers/video/backlight/da903x.c
rename to drivers/video/backlight/da903x_bl.c
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index 91b78e6..f53b9f1 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -250,10 +250,6 @@
int rc, size = cmap->len * sizeof(u16);
struct fb_cmap umap;
- if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
- !info->fbops->fb_setcmap))
- return -EINVAL;
-
memset(&umap, 0, sizeof(struct fb_cmap));
rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
if (rc)
@@ -262,11 +258,23 @@
copy_from_user(umap.green, cmap->green, size) ||
copy_from_user(umap.blue, cmap->blue, size) ||
(cmap->transp && copy_from_user(umap.transp, cmap->transp, size))) {
- fb_dealloc_cmap(&umap);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out;
}
umap.start = cmap->start;
+ if (!lock_fb_info(info)) {
+ rc = -ENODEV;
+ goto out;
+ }
+ if (cmap->start < 0 || (!info->fbops->fb_setcolreg &&
+ !info->fbops->fb_setcmap)) {
+ rc = -EINVAL;
+ goto out1;
+ }
rc = fb_set_cmap(&umap, info);
+out1:
+ unlock_fb_info(info);
+out:
fb_dealloc_cmap(&umap);
return rc;
}
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 756efeb..cfd9dce 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1013,132 +1013,139 @@
struct fb_var_screeninfo var;
struct fb_fix_screeninfo fix;
struct fb_con2fbmap con2fb;
+ struct fb_cmap cmap_from;
struct fb_cmap_user cmap;
struct fb_event event;
void __user *argp = (void __user *)arg;
long ret = 0;
- fb = info->fbops;
- if (!fb)
- return -ENODEV;
-
switch (cmd) {
case FBIOGET_VSCREENINFO:
- ret = copy_to_user(argp, &info->var,
- sizeof(var)) ? -EFAULT : 0;
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ var = info->var;
+ unlock_fb_info(info);
+
+ ret = copy_to_user(argp, &var, sizeof(var)) ? -EFAULT : 0;
break;
case FBIOPUT_VSCREENINFO:
- if (copy_from_user(&var, argp, sizeof(var))) {
- ret = -EFAULT;
- break;
- }
+ if (copy_from_user(&var, argp, sizeof(var)))
+ return -EFAULT;
+ if (!lock_fb_info(info))
+ return -ENODEV;
acquire_console_sem();
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_set_var(info, &var);
info->flags &= ~FBINFO_MISC_USEREVENT;
release_console_sem();
- if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
+ unlock_fb_info(info);
+ if (!ret && copy_to_user(argp, &var, sizeof(var)))
ret = -EFAULT;
break;
case FBIOGET_FSCREENINFO:
- ret = copy_to_user(argp, &info->fix,
- sizeof(fix)) ? -EFAULT : 0;
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ fix = info->fix;
+ unlock_fb_info(info);
+
+ ret = copy_to_user(argp, &fix, sizeof(fix)) ? -EFAULT : 0;
break;
case FBIOPUTCMAP:
if (copy_from_user(&cmap, argp, sizeof(cmap)))
- ret = -EFAULT;
- else
- ret = fb_set_user_cmap(&cmap, info);
+ return -EFAULT;
+ ret = fb_set_user_cmap(&cmap, info);
break;
case FBIOGETCMAP:
if (copy_from_user(&cmap, argp, sizeof(cmap)))
- ret = -EFAULT;
- else
- ret = fb_cmap_to_user(&info->cmap, &cmap);
+ return -EFAULT;
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ cmap_from = info->cmap;
+ unlock_fb_info(info);
+ ret = fb_cmap_to_user(&cmap_from, &cmap);
break;
case FBIOPAN_DISPLAY:
- if (copy_from_user(&var, argp, sizeof(var))) {
- ret = -EFAULT;
- break;
- }
+ if (copy_from_user(&var, argp, sizeof(var)))
+ return -EFAULT;
+ if (!lock_fb_info(info))
+ return -ENODEV;
acquire_console_sem();
ret = fb_pan_display(info, &var);
release_console_sem();
+ unlock_fb_info(info);
if (ret == 0 && copy_to_user(argp, &var, sizeof(var)))
- ret = -EFAULT;
+ return -EFAULT;
break;
case FBIO_CURSOR:
ret = -EINVAL;
break;
case FBIOGET_CON2FBMAP:
if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
- ret = -EFAULT;
- else if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
- ret = -EINVAL;
- else {
- con2fb.framebuffer = -1;
- event.info = info;
- event.data = &con2fb;
- fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP,
- &event);
- ret = copy_to_user(argp, &con2fb,
- sizeof(con2fb)) ? -EFAULT : 0;
- }
+ return -EFAULT;
+ if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+ return -EINVAL;
+ con2fb.framebuffer = -1;
+ event.data = &con2fb;
+
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ event.info = info;
+ fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
+
+ ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
break;
case FBIOPUT_CON2FBMAP:
- if (copy_from_user(&con2fb, argp, sizeof(con2fb))) {
- ret = -EFAULT;
- break;
- }
- if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES) {
- ret = -EINVAL;
- break;
- }
- if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX) {
- ret = -EINVAL;
- break;
- }
+ if (copy_from_user(&con2fb, argp, sizeof(con2fb)))
+ return -EFAULT;
+ if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
+ return -EINVAL;
+ if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX)
+ return -EINVAL;
if (!registered_fb[con2fb.framebuffer])
request_module("fb%d", con2fb.framebuffer);
if (!registered_fb[con2fb.framebuffer]) {
ret = -EINVAL;
break;
}
- event.info = info;
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP,
&event);
+ unlock_fb_info(info);
break;
case FBIOBLANK:
+ if (!lock_fb_info(info))
+ return -ENODEV;
acquire_console_sem();
info->flags |= FBINFO_MISC_USEREVENT;
ret = fb_blank(info, arg);
info->flags &= ~FBINFO_MISC_USEREVENT;
release_console_sem();
- break;;
+ unlock_fb_info(info);
+ break;
default:
- if (fb->fb_ioctl == NULL)
- ret = -ENOTTY;
- else
+ if (!lock_fb_info(info))
+ return -ENODEV;
+ fb = info->fbops;
+ if (fb->fb_ioctl)
ret = fb->fb_ioctl(info, cmd, arg);
+ else
+ ret = -ENOTTY;
+ unlock_fb_info(info);
}
return ret;
}
static long fb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-__acquires(&info->lock)
-__releases(&info->lock)
{
struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
- struct fb_info *info;
- long ret;
+ struct fb_info *info = registered_fb[fbidx];
- info = registered_fb[fbidx];
- mutex_lock(&info->lock);
- ret = do_fb_ioctl(info, cmd, arg);
- mutex_unlock(&info->lock);
- return ret;
+ return do_fb_ioctl(info, cmd, arg);
}
#ifdef CONFIG_COMPAT
@@ -1257,8 +1264,6 @@
static long fb_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
-__acquires(&info->lock)
-__releases(&info->lock)
{
struct inode *inode = file->f_path.dentry->d_inode;
int fbidx = iminor(inode);
@@ -1266,7 +1271,6 @@
struct fb_ops *fb = info->fbops;
long ret = -ENOIOCTLCMD;
- mutex_lock(&info->lock);
switch(cmd) {
case FBIOGET_VSCREENINFO:
case FBIOPUT_VSCREENINFO:
@@ -1292,7 +1296,6 @@
ret = fb->fb_compat_ioctl(info, cmd, arg);
break;
}
- mutex_unlock(&info->lock);
return ret;
}
#endif
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 8e93341..9c23583 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -553,12 +553,24 @@
child = sd->s_dentry;
+ /*
+ * Note: we hide this from lockdep since we have no way
+ * to teach lockdep about recursive
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD patterns along a path
+ * in an inode tree, which are valid as soon as
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD is valid from a
+ * parent inode to one of its children.
+ */
+ lockdep_off();
mutex_lock(&child->d_inode->i_mutex);
+ lockdep_on();
configfs_detach_group(sd->s_element);
child->d_inode->i_flags |= S_DEAD;
+ lockdep_off();
mutex_unlock(&child->d_inode->i_mutex);
+ lockdep_on();
d_delete(child);
dput(child);
@@ -748,11 +760,22 @@
* We are going to remove an inode and its dentry but
* the VFS may already have hit and used them. Thus,
* we must lock them as rmdir() would.
+ *
+ * Note: we hide this from lockdep since we have no way
+ * to teach lockdep about recursive
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD patterns along a path
+ * in an inode tree, which are valid as soon as
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD is valid from a
+ * parent inode to one of its children.
*/
+ lockdep_off();
mutex_lock(&dentry->d_inode->i_mutex);
+ lockdep_on();
configfs_remove_dir(item);
dentry->d_inode->i_flags |= S_DEAD;
+ lockdep_off();
mutex_unlock(&dentry->d_inode->i_mutex);
+ lockdep_on();
d_delete(dentry);
}
}
@@ -787,14 +810,25 @@
*
* We must also lock the inode to remove it safely in case of
* error, as rmdir() would.
+ *
+ * Note: we hide this from lockdep since we have no way
+ * to teach lockdep about recursive
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD patterns along a path
+ * in an inode tree, which are valid as soon as
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD is valid from a
+ * parent inode to one of its children.
*/
+ lockdep_off();
mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD);
+ lockdep_on();
ret = populate_groups(to_config_group(item));
if (ret) {
configfs_detach_item(item);
dentry->d_inode->i_flags |= S_DEAD;
}
+ lockdep_off();
mutex_unlock(&dentry->d_inode->i_mutex);
+ lockdep_on();
if (ret)
d_delete(dentry);
}
@@ -956,7 +990,17 @@
BUG_ON(!origin || !sd);
/* Lock this guy on the way down */
+ /*
+ * Note: we hide this from lockdep since we have no way
+ * to teach lockdep about recursive
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD patterns along a path
+ * in an inode tree, which are valid as soon as
+ * I_MUTEX_PARENT -> I_MUTEX_CHILD is valid from a
+ * parent inode to one of its children.
+ */
+ lockdep_off();
mutex_lock(&sd->s_dentry->d_inode->i_mutex);
+ lockdep_on();
if (sd->s_element == target) /* Boo-yah */
goto out;
@@ -970,7 +1014,9 @@
}
/* We looped all our children and didn't find target */
+ lockdep_off();
mutex_unlock(&sd->s_dentry->d_inode->i_mutex);
+ lockdep_on();
ret = -ENOENT;
out:
@@ -990,11 +1036,16 @@
struct dentry *dentry = item->ci_dentry;
while (dentry != origin) {
+ /* See comments in configfs_depend_prep() */
+ lockdep_off();
mutex_unlock(&dentry->d_inode->i_mutex);
+ lockdep_on();
dentry = dentry->d_parent;
}
+ lockdep_off();
mutex_unlock(&origin->d_inode->i_mutex);
+ lockdep_on();
}
int configfs_depend_item(struct configfs_subsystem *subsys,
@@ -1329,8 +1380,16 @@
}
/* Wait until the racing operation terminates */
+ /*
+ * Note: we hide this from lockdep since we are locked
+ * with subclass I_MUTEX_NORMAL from vfs_rmdir() (why
+ * not I_MUTEX_CHILD?), and I_MUTEX_XATTR or
+ * I_MUTEX_QUOTA are not relevant for the locked inode.
+ */
+ lockdep_off();
mutex_lock(wait_mutex);
mutex_unlock(wait_mutex);
+ lockdep_on();
}
} while (ret == -EAGAIN);
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index d861096c..60fe74035 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -5390,6 +5390,9 @@
goto out;
}
+ vfs_dq_free_space_nodirty(inode,
+ ocfs2_clusters_to_bytes(inode->i_sb, len));
+
ret = ocfs2_remove_extent(inode, et, cpos, len, handle, meta_ac,
dealloc);
if (ret) {
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index b1cc7c3..e9d7c20 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -38,6 +38,7 @@
#include "dlmglue.h"
#include "file.h"
#include "inode.h"
+#include "super.h"
static int ocfs2_dentry_revalidate(struct dentry *dentry,
@@ -294,6 +295,34 @@
return ret;
}
+static DEFINE_SPINLOCK(dentry_list_lock);
+
+/* We limit the number of dentry locks to drop in one go. We have
+ * this limit so that we don't starve other users of ocfs2_wq. */
+#define DL_INODE_DROP_COUNT 64
+
+/* Drop inode references from dentry locks */
+void ocfs2_drop_dl_inodes(struct work_struct *work)
+{
+ struct ocfs2_super *osb = container_of(work, struct ocfs2_super,
+ dentry_lock_work);
+ struct ocfs2_dentry_lock *dl;
+ int drop_count = DL_INODE_DROP_COUNT;
+
+ spin_lock(&dentry_list_lock);
+ while (osb->dentry_lock_list && drop_count--) {
+ dl = osb->dentry_lock_list;
+ osb->dentry_lock_list = dl->dl_next;
+ spin_unlock(&dentry_list_lock);
+ iput(dl->dl_inode);
+ kfree(dl);
+ spin_lock(&dentry_list_lock);
+ }
+ if (osb->dentry_lock_list)
+ queue_work(ocfs2_wq, &osb->dentry_lock_work);
+ spin_unlock(&dentry_list_lock);
+}
+
/*
* ocfs2_dentry_iput() and friends.
*
@@ -318,16 +347,23 @@
static void ocfs2_drop_dentry_lock(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl)
{
- iput(dl->dl_inode);
ocfs2_simple_drop_lockres(osb, &dl->dl_lockres);
ocfs2_lock_res_free(&dl->dl_lockres);
- kfree(dl);
+
+ /* We leave dropping of inode reference to ocfs2_wq as that can
+ * possibly lead to inode deletion which gets tricky */
+ spin_lock(&dentry_list_lock);
+ if (!osb->dentry_lock_list)
+ queue_work(ocfs2_wq, &osb->dentry_lock_work);
+ dl->dl_next = osb->dentry_lock_list;
+ osb->dentry_lock_list = dl;
+ spin_unlock(&dentry_list_lock);
}
void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl)
{
- int unlock = 0;
+ int unlock;
BUG_ON(dl->dl_count == 0);
diff --git a/fs/ocfs2/dcache.h b/fs/ocfs2/dcache.h
index c091c34..d06e16c 100644
--- a/fs/ocfs2/dcache.h
+++ b/fs/ocfs2/dcache.h
@@ -29,8 +29,13 @@
extern struct dentry_operations ocfs2_dentry_ops;
struct ocfs2_dentry_lock {
+ /* Use count of dentry lock */
unsigned int dl_count;
- u64 dl_parent_blkno;
+ union {
+ /* Linked list of dentry locks to release */
+ struct ocfs2_dentry_lock *dl_next;
+ u64 dl_parent_blkno;
+ };
/*
* The ocfs2_dentry_lock keeps an inode reference until
@@ -47,6 +52,8 @@
void ocfs2_dentry_lock_put(struct ocfs2_super *osb,
struct ocfs2_dentry_lock *dl);
+void ocfs2_drop_dl_inodes(struct work_struct *work);
+
struct dentry *ocfs2_find_local_alias(struct inode *inode, u64 parent_blkno,
int skip_unhashed);
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index b0c4cad..206a237 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -2860,6 +2860,10 @@
case OCFS2_UNLOCK_CANCEL_CONVERT:
mlog(0, "Cancel convert success for %s\n", lockres->l_name);
lockres->l_action = OCFS2_AST_INVALID;
+ /* Downconvert thread may have requeued this lock, we
+ * need to wake it. */
+ if (lockres->l_flags & OCFS2_LOCK_BLOCKED)
+ ocfs2_wake_downconvert_thread(ocfs2_get_lockres_osb(lockres));
break;
case OCFS2_UNLOCK_DROP_LOCK:
lockres->l_level = DLM_LOCK_IV;
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index ad5c24a..0773841 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -210,6 +210,7 @@
struct ocfs2_slot_info;
struct ocfs2_recovery_map;
struct ocfs2_quota_recovery;
+struct ocfs2_dentry_lock;
struct ocfs2_super
{
struct task_struct *commit_task;
@@ -325,6 +326,11 @@
struct list_head blocked_lock_list;
unsigned long blocked_lock_count;
+ /* List of dentry locks to release. Anyone can add locks to
+ * the list, ocfs2_wq processes the list */
+ struct ocfs2_dentry_lock *dentry_lock_list;
+ struct work_struct dentry_lock_work;
+
wait_queue_head_t osb_mount_event;
/* Truncate log info */
diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c
index f4efa89..1ed0f7c 100644
--- a/fs/ocfs2/quota_global.c
+++ b/fs/ocfs2/quota_global.c
@@ -754,7 +754,9 @@
if (dquot->dq_flags & mask)
sync = 1;
spin_unlock(&dq_data_lock);
- if (!sync) {
+ /* This is a slight hack but we can't afford getting global quota
+ * lock if we already have a transaction started. */
+ if (!sync || journal_current_handle()) {
status = ocfs2_write_dquot(dquot);
goto out;
}
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 43ed113..b1cb38f 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1887,6 +1887,9 @@
INIT_WORK(&journal->j_recovery_work, ocfs2_complete_recovery);
journal->j_state = OCFS2_JOURNAL_FREE;
+ INIT_WORK(&osb->dentry_lock_work, ocfs2_drop_dl_inodes);
+ osb->dentry_lock_list = NULL;
+
/* get some pseudo constants for clustersize bits */
osb->s_clustersize_bits =
le32_to_cpu(di->id2.i_super.s_clustersize_bits);
diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index e1d638a..915039f 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -4729,13 +4729,6 @@
vb.vb_xv = (struct ocfs2_xattr_value_root *)
(vb.vb_bh->b_data + offset % blocksize);
- ret = ocfs2_xattr_bucket_journal_access(ctxt->handle, bucket,
- OCFS2_JOURNAL_ACCESS_WRITE);
- if (ret) {
- mlog_errno(ret);
- goto out;
- }
-
/*
* From here on out we have to dirty the bucket. The generic
* value calls only modify one of the bucket's bhs, but we need
@@ -4748,12 +4741,18 @@
ret = ocfs2_xattr_value_truncate(inode, &vb, len, ctxt);
if (ret) {
mlog_errno(ret);
- goto out_dirty;
+ goto out;
+ }
+
+ ret = ocfs2_xattr_bucket_journal_access(ctxt->handle, bucket,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
}
xe->xe_value_size = cpu_to_le64(len);
-out_dirty:
ocfs2_xattr_bucket_journal_dirty(ctxt->handle, bucket);
out:
diff --git a/fs/seq_file.c b/fs/seq_file.c
index b569ff1..5267098 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -54,6 +54,64 @@
}
EXPORT_SYMBOL(seq_open);
+static int traverse(struct seq_file *m, loff_t offset)
+{
+ loff_t pos = 0, index;
+ int error = 0;
+ void *p;
+
+ m->version = 0;
+ index = 0;
+ m->count = m->from = 0;
+ if (!offset) {
+ m->index = index;
+ return 0;
+ }
+ if (!m->buf) {
+ m->buf = kmalloc(m->size = PAGE_SIZE, GFP_KERNEL);
+ if (!m->buf)
+ return -ENOMEM;
+ }
+ p = m->op->start(m, &index);
+ while (p) {
+ error = PTR_ERR(p);
+ if (IS_ERR(p))
+ break;
+ error = m->op->show(m, p);
+ if (error < 0)
+ break;
+ if (unlikely(error)) {
+ error = 0;
+ m->count = 0;
+ }
+ if (m->count == m->size)
+ goto Eoverflow;
+ if (pos + m->count > offset) {
+ m->from = offset - pos;
+ m->count -= m->from;
+ m->index = index;
+ break;
+ }
+ pos += m->count;
+ m->count = 0;
+ if (pos == offset) {
+ index++;
+ m->index = index;
+ break;
+ }
+ p = m->op->next(m, p, &index);
+ }
+ m->op->stop(m, p);
+ m->index = index;
+ return error;
+
+Eoverflow:
+ m->op->stop(m, p);
+ kfree(m->buf);
+ m->buf = kmalloc(m->size <<= 1, GFP_KERNEL);
+ return !m->buf ? -ENOMEM : -EAGAIN;
+}
+
/**
* seq_read - ->read() method for sequential files.
* @file: the file to read from
@@ -186,63 +244,6 @@
}
EXPORT_SYMBOL(seq_read);
-static int traverse(struct seq_file *m, loff_t offset)
-{
- loff_t pos = 0, index;
- int error = 0;
- void *p;
-
- m->version = 0;
- index = 0;
- m->count = m->from = 0;
- if (!offset) {
- m->index = index;
- return 0;
- }
- if (!m->buf) {
- m->buf = kmalloc(m->size = PAGE_SIZE, GFP_KERNEL);
- if (!m->buf)
- return -ENOMEM;
- }
- p = m->op->start(m, &index);
- while (p) {
- error = PTR_ERR(p);
- if (IS_ERR(p))
- break;
- error = m->op->show(m, p);
- if (error < 0)
- break;
- if (unlikely(error)) {
- error = 0;
- m->count = 0;
- }
- if (m->count == m->size)
- goto Eoverflow;
- if (pos + m->count > offset) {
- m->from = offset - pos;
- m->count -= m->from;
- m->index = index;
- break;
- }
- pos += m->count;
- m->count = 0;
- if (pos == offset) {
- index++;
- m->index = index;
- break;
- }
- p = m->op->next(m, p, &index);
- }
- m->op->stop(m, p);
- return error;
-
-Eoverflow:
- m->op->stop(m, p);
- kfree(m->buf);
- m->buf = kmalloc(m->size <<= 1, GFP_KERNEL);
- return !m->buf ? -ENOMEM : -EAGAIN;
-}
-
/**
* seq_lseek - ->llseek() method for sequential files.
* @file: the file in question
diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 175f9c5..f393620 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -689,7 +689,7 @@
}
/**
- * ubifs_get_free_space - return amount of free space.
+ * ubifs_get_free_space_nolock - return amount of free space.
* @c: UBIFS file-system description object
*
* This function calculates amount of free space to report to user-space.
@@ -704,16 +704,14 @@
* traditional file-systems, because they have way less overhead than UBIFS.
* So, to keep users happy, UBIFS tries to take the overhead into account.
*/
-long long ubifs_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space_nolock(struct ubifs_info *c)
{
- int min_idx_lebs, rsvd_idx_lebs, lebs;
+ int rsvd_idx_lebs, lebs;
long long available, outstanding, free;
- spin_lock(&c->space_lock);
- min_idx_lebs = c->min_idx_lebs;
- ubifs_assert(min_idx_lebs == ubifs_calc_min_idx_lebs(c));
+ ubifs_assert(c->min_idx_lebs == ubifs_calc_min_idx_lebs(c));
outstanding = c->budg_data_growth + c->budg_dd_growth;
- available = ubifs_calc_available(c, min_idx_lebs);
+ available = ubifs_calc_available(c, c->min_idx_lebs);
/*
* When reporting free space to user-space, UBIFS guarantees that it is
@@ -726,15 +724,14 @@
* Note, the calculations below are similar to what we have in
* 'do_budget_space()', so refer there for comments.
*/
- if (min_idx_lebs > c->lst.idx_lebs)
- rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+ if (c->min_idx_lebs > c->lst.idx_lebs)
+ rsvd_idx_lebs = c->min_idx_lebs - c->lst.idx_lebs;
else
rsvd_idx_lebs = 0;
lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
c->lst.taken_empty_lebs;
lebs -= rsvd_idx_lebs;
available += lebs * (c->dark_wm - c->leb_overhead);
- spin_unlock(&c->space_lock);
if (available > outstanding)
free = ubifs_reported_space(c, available - outstanding);
@@ -742,3 +739,21 @@
free = 0;
return free;
}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
+ * @c: UBIFS file-system description object
+ *
+ * This function calculates and retuns amount of free space to report to
+ * user-space.
+ */
+long long ubifs_get_free_space(struct ubifs_info *c)
+{
+ long long free;
+
+ spin_lock(&c->space_lock);
+ free = ubifs_get_free_space_nolock(c);
+ spin_unlock(&c->space_lock);
+
+ return free;
+}
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index 792c5a1..e975bd8 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -620,9 +620,11 @@
c->dark_wm, c->dead_wm, c->max_idx_node_sz);
printk(KERN_DEBUG "\tgc_lnum %d, ihead_lnum %d\n",
c->gc_lnum, c->ihead_lnum);
- for (i = 0; i < c->jhead_cnt; i++)
- printk(KERN_DEBUG "\tjhead %d\t LEB %d\n",
- c->jheads[i].wbuf.jhead, c->jheads[i].wbuf.lnum);
+ /* If we are in R/O mode, journal heads do not exist */
+ if (c->jheads)
+ for (i = 0; i < c->jhead_cnt; i++)
+ printk(KERN_DEBUG "\tjhead %d\t LEB %d\n",
+ c->jheads[i].wbuf.jhead, c->jheads[i].wbuf.lnum);
for (rb = rb_first(&c->buds); rb; rb = rb_next(rb)) {
bud = rb_entry(rb, struct ubifs_bud, rb);
printk(KERN_DEBUG "\tbud LEB %d\n", bud->lnum);
@@ -637,10 +639,7 @@
/* Print budgeting predictions */
available = ubifs_calc_available(c, c->min_idx_lebs);
outstanding = c->budg_data_growth + c->budg_dd_growth;
- if (available > outstanding)
- free = ubifs_reported_space(c, available - outstanding);
- else
- free = 0;
+ free = ubifs_get_free_space_nolock(c);
printk(KERN_DEBUG "Budgeting predictions:\n");
printk(KERN_DEBUG "\tavailable: %lld, outstanding %lld, free %lld\n",
available, outstanding, free);
@@ -861,6 +860,65 @@
}
/**
+ * dbg_save_space_info - save information about flash space.
+ * @c: UBIFS file-system description object
+ *
+ * This function saves information about UBIFS free space, dirty space, etc, in
+ * order to check it later.
+ */
+void dbg_save_space_info(struct ubifs_info *c)
+{
+ struct ubifs_debug_info *d = c->dbg;
+
+ ubifs_get_lp_stats(c, &d->saved_lst);
+
+ spin_lock(&c->space_lock);
+ d->saved_free = ubifs_get_free_space_nolock(c);
+ spin_unlock(&c->space_lock);
+}
+
+/**
+ * dbg_check_space_info - check flash space information.
+ * @c: UBIFS file-system description object
+ *
+ * This function compares current flash space information with the information
+ * which was saved when the 'dbg_save_space_info()' function was called.
+ * Returns zero if the information has not changed, and %-EINVAL it it has
+ * changed.
+ */
+int dbg_check_space_info(struct ubifs_info *c)
+{
+ struct ubifs_debug_info *d = c->dbg;
+ struct ubifs_lp_stats lst;
+ long long avail, free;
+
+ spin_lock(&c->space_lock);
+ avail = ubifs_calc_available(c, c->min_idx_lebs);
+ spin_unlock(&c->space_lock);
+ free = ubifs_get_free_space(c);
+
+ if (free != d->saved_free) {
+ ubifs_err("free space changed from %lld to %lld",
+ d->saved_free, free);
+ goto out;
+ }
+
+ return 0;
+
+out:
+ ubifs_msg("saved lprops statistics dump");
+ dbg_dump_lstats(&d->saved_lst);
+ ubifs_get_lp_stats(c, &lst);
+ ubifs_msg("current lprops statistics dump");
+ dbg_dump_lstats(&d->saved_lst);
+ spin_lock(&c->space_lock);
+ dbg_dump_budg(c);
+ spin_unlock(&c->space_lock);
+ dump_stack();
+ return -EINVAL;
+}
+
+/**
* dbg_check_synced_i_size - check synchronized inode size.
* @inode: inode to check
*
@@ -1349,7 +1407,7 @@
* @c: UBIFS file-system description object
* @leaf_cb: called for each leaf node
* @znode_cb: called for each indexing node
- * @priv: private date which is passed to callbacks
+ * @priv: private data which is passed to callbacks
*
* This function walks the UBIFS index and calls the @leaf_cb for each leaf
* node and @znode_cb for each indexing node. Returns zero in case of success
@@ -2409,7 +2467,7 @@
* Root directory for UBIFS stuff in debugfs. Contains sub-directories which
* contain the stuff specific to particular file-system mounts.
*/
-static struct dentry *debugfs_rootdir;
+static struct dentry *dfs_rootdir;
/**
* dbg_debugfs_init - initialize debugfs file-system.
@@ -2421,9 +2479,9 @@
*/
int dbg_debugfs_init(void)
{
- debugfs_rootdir = debugfs_create_dir("ubifs", NULL);
- if (IS_ERR(debugfs_rootdir)) {
- int err = PTR_ERR(debugfs_rootdir);
+ dfs_rootdir = debugfs_create_dir("ubifs", NULL);
+ if (IS_ERR(dfs_rootdir)) {
+ int err = PTR_ERR(dfs_rootdir);
ubifs_err("cannot create \"ubifs\" debugfs directory, "
"error %d\n", err);
return err;
@@ -2437,7 +2495,7 @@
*/
void dbg_debugfs_exit(void)
{
- debugfs_remove(debugfs_rootdir);
+ debugfs_remove(dfs_rootdir);
}
static int open_debugfs_file(struct inode *inode, struct file *file)
@@ -2452,13 +2510,13 @@
struct ubifs_info *c = file->private_data;
struct ubifs_debug_info *d = c->dbg;
- if (file->f_path.dentry == d->dump_lprops)
+ if (file->f_path.dentry == d->dfs_dump_lprops)
dbg_dump_lprops(c);
- else if (file->f_path.dentry == d->dump_budg) {
+ else if (file->f_path.dentry == d->dfs_dump_budg) {
spin_lock(&c->space_lock);
dbg_dump_budg(c);
spin_unlock(&c->space_lock);
- } else if (file->f_path.dentry == d->dump_tnc) {
+ } else if (file->f_path.dentry == d->dfs_dump_tnc) {
mutex_lock(&c->tnc_mutex);
dbg_dump_tnc(c);
mutex_unlock(&c->tnc_mutex);
@@ -2469,7 +2527,7 @@
return count;
}
-static const struct file_operations debugfs_fops = {
+static const struct file_operations dfs_fops = {
.open = open_debugfs_file,
.write = write_debugfs_file,
.owner = THIS_MODULE,
@@ -2494,36 +2552,32 @@
struct dentry *dent;
struct ubifs_debug_info *d = c->dbg;
- sprintf(d->debugfs_dir_name, "ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
- d->debugfs_dir = debugfs_create_dir(d->debugfs_dir_name,
- debugfs_rootdir);
- if (IS_ERR(d->debugfs_dir)) {
- err = PTR_ERR(d->debugfs_dir);
+ sprintf(d->dfs_dir_name, "ubi%d_%d", c->vi.ubi_num, c->vi.vol_id);
+ d->dfs_dir = debugfs_create_dir(d->dfs_dir_name, dfs_rootdir);
+ if (IS_ERR(d->dfs_dir)) {
+ err = PTR_ERR(d->dfs_dir);
ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
- d->debugfs_dir_name, err);
+ d->dfs_dir_name, err);
goto out;
}
fname = "dump_lprops";
- dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
- &debugfs_fops);
+ dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
- d->dump_lprops = dent;
+ d->dfs_dump_lprops = dent;
fname = "dump_budg";
- dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
- &debugfs_fops);
+ dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
- d->dump_budg = dent;
+ d->dfs_dump_budg = dent;
fname = "dump_tnc";
- dent = debugfs_create_file(fname, S_IWUGO, d->debugfs_dir, c,
- &debugfs_fops);
+ dent = debugfs_create_file(fname, S_IWUGO, d->dfs_dir, c, &dfs_fops);
if (IS_ERR(dent))
goto out_remove;
- d->dump_tnc = dent;
+ d->dfs_dump_tnc = dent;
return 0;
@@ -2531,7 +2585,7 @@
err = PTR_ERR(dent);
ubifs_err("cannot create \"%s\" debugfs directory, error %d\n",
fname, err);
- debugfs_remove_recursive(d->debugfs_dir);
+ debugfs_remove_recursive(d->dfs_dir);
out:
return err;
}
@@ -2542,7 +2596,7 @@
*/
void dbg_debugfs_exit_fs(struct ubifs_info *c)
{
- debugfs_remove_recursive(c->dbg->debugfs_dir);
+ debugfs_remove_recursive(c->dbg->dfs_dir);
}
#endif /* CONFIG_UBIFS_FS_DEBUG */
diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h
index 9820d69..c1cd73b 100644
--- a/fs/ubifs/debug.h
+++ b/fs/ubifs/debug.h
@@ -41,15 +41,17 @@
* @chk_lpt_wastage: used by LPT tree size checker
* @chk_lpt_lebs: used by LPT tree size checker
* @new_nhead_offs: used by LPT tree size checker
- * @new_ihead_lnum: used by debugging to check ihead_lnum
- * @new_ihead_offs: used by debugging to check ihead_offs
+ * @new_ihead_lnum: used by debugging to check @c->ihead_lnum
+ * @new_ihead_offs: used by debugging to check @c->ihead_offs
*
- * debugfs_dir_name: name of debugfs directory containing this file-system's
- * files
- * debugfs_dir: direntry object of the file-system debugfs directory
- * dump_lprops: "dump lprops" debugfs knob
- * dump_budg: "dump budgeting information" debugfs knob
- * dump_tnc: "dump TNC" debugfs knob
+ * @saved_lst: saved lprops statistics (used by 'dbg_save_space_info()')
+ * @saved_free: saved free space (used by 'dbg_save_space_info()')
+ *
+ * dfs_dir_name: name of debugfs directory containing this file-system's files
+ * dfs_dir: direntry object of the file-system debugfs directory
+ * dfs_dump_lprops: "dump lprops" debugfs knob
+ * dfs_dump_budg: "dump budgeting information" debugfs knob
+ * dfs_dump_tnc: "dump TNC" debugfs knob
*/
struct ubifs_debug_info {
void *buf;
@@ -69,11 +71,14 @@
int new_ihead_lnum;
int new_ihead_offs;
- char debugfs_dir_name[100];
- struct dentry *debugfs_dir;
- struct dentry *dump_lprops;
- struct dentry *dump_budg;
- struct dentry *dump_tnc;
+ struct ubifs_lp_stats saved_lst;
+ long long saved_free;
+
+ char dfs_dir_name[100];
+ struct dentry *dfs_dir;
+ struct dentry *dfs_dump_lprops;
+ struct dentry *dfs_dump_budg;
+ struct dentry *dfs_dump_tnc;
};
#define ubifs_assert(expr) do { \
@@ -297,7 +302,8 @@
dbg_znode_callback znode_cb, void *priv);
/* Checking functions */
-
+void dbg_save_space_info(struct ubifs_info *c);
+int dbg_check_space_info(struct ubifs_info *c);
int dbg_check_lprops(struct ubifs_info *c);
int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
@@ -439,6 +445,8 @@
#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
#define dbg_old_index_check_init(c, zroot) 0
+#define dbg_save_space_info(c) ({})
+#define dbg_check_space_info(c) 0
#define dbg_check_old_index(c, zroot) 0
#define dbg_check_cats(c) 0
#define dbg_check_ltab(c) 0
diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index f448ab1..f55d523 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -482,30 +482,29 @@
}
/**
- * lock_2_inodes - lock two UBIFS inodes.
+ * lock_2_inodes - a wrapper for locking two UBIFS inodes.
* @inode1: first inode
* @inode2: second inode
+ *
+ * We do not implement any tricks to guarantee strict lock ordering, because
+ * VFS has already done it for us on the @i_mutex. So this is just a simple
+ * wrapper function.
*/
static void lock_2_inodes(struct inode *inode1, struct inode *inode2)
{
- if (inode1->i_ino < inode2->i_ino) {
- mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_2);
- mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_3);
- } else {
- mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
- mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_3);
- }
+ mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
+ mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
}
/**
- * unlock_2_inodes - unlock two UBIFS inodes inodes.
+ * unlock_2_inodes - a wrapper for unlocking two UBIFS inodes.
* @inode1: first inode
* @inode2: second inode
*/
static void unlock_2_inodes(struct inode *inode1, struct inode *inode2)
{
- mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+ mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
}
static int ubifs_link(struct dentry *old_dentry, struct inode *dir,
@@ -527,6 +526,8 @@
dbg_gen("dent '%.*s' to ino %lu (nlink %d) in dir ino %lu",
dentry->d_name.len, dentry->d_name.name, inode->i_ino,
inode->i_nlink, dir->i_ino);
+ ubifs_assert(mutex_is_locked(&dir->i_mutex));
+ ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = dbg_check_synced_i_size(inode);
if (err)
return err;
@@ -580,6 +581,8 @@
dbg_gen("dent '%.*s' from ino %lu (nlink %d) in dir ino %lu",
dentry->d_name.len, dentry->d_name.name, inode->i_ino,
inode->i_nlink, dir->i_ino);
+ ubifs_assert(mutex_is_locked(&dir->i_mutex));
+ ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = dbg_check_synced_i_size(inode);
if (err)
return err;
@@ -667,7 +670,8 @@
dbg_gen("directory '%.*s', ino %lu in dir ino %lu", dentry->d_name.len,
dentry->d_name.name, inode->i_ino, dir->i_ino);
-
+ ubifs_assert(mutex_is_locked(&dir->i_mutex));
+ ubifs_assert(mutex_is_locked(&inode->i_mutex));
err = check_dir_empty(c, dentry->d_inode);
if (err)
return err;
@@ -922,59 +926,30 @@
}
/**
- * lock_3_inodes - lock three UBIFS inodes for rename.
+ * lock_3_inodes - a wrapper for locking three UBIFS inodes.
* @inode1: first inode
* @inode2: second inode
* @inode3: third inode
*
- * For 'ubifs_rename()', @inode1 may be the same as @inode2 whereas @inode3 may
- * be null.
+ * This function is used for 'ubifs_rename()' and @inode1 may be the same as
+ * @inode2 whereas @inode3 may be %NULL.
+ *
+ * We do not implement any tricks to guarantee strict lock ordering, because
+ * VFS has already done it for us on the @i_mutex. So this is just a simple
+ * wrapper function.
*/
static void lock_3_inodes(struct inode *inode1, struct inode *inode2,
struct inode *inode3)
{
- struct inode *i1, *i2, *i3;
-
- if (!inode3) {
- if (inode1 != inode2) {
- lock_2_inodes(inode1, inode2);
- return;
- }
- mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
- return;
- }
-
- if (inode1 == inode2) {
- lock_2_inodes(inode1, inode3);
- return;
- }
-
- /* 3 different inodes */
- if (inode1 < inode2) {
- i3 = inode2;
- if (inode1 < inode3) {
- i1 = inode1;
- i2 = inode3;
- } else {
- i1 = inode3;
- i2 = inode1;
- }
- } else {
- i3 = inode1;
- if (inode2 < inode3) {
- i1 = inode2;
- i2 = inode3;
- } else {
- i1 = inode3;
- i2 = inode2;
- }
- }
- mutex_lock_nested(&ubifs_inode(i1)->ui_mutex, WB_MUTEX_1);
- lock_2_inodes(i2, i3);
+ mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1);
+ if (inode2 != inode1)
+ mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2);
+ if (inode3)
+ mutex_lock_nested(&ubifs_inode(inode3)->ui_mutex, WB_MUTEX_3);
}
/**
- * unlock_3_inodes - unlock three UBIFS inodes for rename.
+ * unlock_3_inodes - a wrapper for unlocking three UBIFS inodes for rename.
* @inode1: first inode
* @inode2: second inode
* @inode3: third inode
@@ -982,11 +957,11 @@
static void unlock_3_inodes(struct inode *inode1, struct inode *inode2,
struct inode *inode3)
{
- mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
- if (inode1 != inode2)
- mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
if (inode3)
mutex_unlock(&ubifs_inode(inode3)->ui_mutex);
+ if (inode1 != inode2)
+ mutex_unlock(&ubifs_inode(inode2)->ui_mutex);
+ mutex_unlock(&ubifs_inode(inode1)->ui_mutex);
}
static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry,
@@ -1020,6 +995,11 @@
"dir ino %lu", old_dentry->d_name.len, old_dentry->d_name.name,
old_inode->i_ino, old_dir->i_ino, new_dentry->d_name.len,
new_dentry->d_name.name, new_dir->i_ino);
+ ubifs_assert(mutex_is_locked(&old_dir->i_mutex));
+ ubifs_assert(mutex_is_locked(&new_dir->i_mutex));
+ if (unlink)
+ ubifs_assert(mutex_is_locked(&new_inode->i_mutex));
+
if (unlink && is_dir) {
err = check_dir_empty(c, new_inode);
@@ -1199,7 +1179,7 @@
return 0;
}
-struct inode_operations ubifs_dir_inode_operations = {
+const struct inode_operations ubifs_dir_inode_operations = {
.lookup = ubifs_lookup,
.create = ubifs_create,
.link = ubifs_link,
@@ -1219,7 +1199,7 @@
#endif
};
-struct file_operations ubifs_dir_operations = {
+const struct file_operations ubifs_dir_operations = {
.llseek = ubifs_dir_llseek,
.release = ubifs_dir_release,
.read = generic_read_dir,
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index bf373745..93b6de5 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -432,7 +432,6 @@
int uninitialized_var(err), appending = !!(pos + len > inode->i_size);
struct page *page;
-
ubifs_assert(ubifs_inode(inode)->ui_size == inode->i_size);
if (unlikely(c->ro_media))
@@ -1541,7 +1540,7 @@
return 0;
}
-struct address_space_operations ubifs_file_address_operations = {
+const struct address_space_operations ubifs_file_address_operations = {
.readpage = ubifs_readpage,
.writepage = ubifs_writepage,
.write_begin = ubifs_write_begin,
@@ -1551,7 +1550,7 @@
.releasepage = ubifs_releasepage,
};
-struct inode_operations ubifs_file_inode_operations = {
+const struct inode_operations ubifs_file_inode_operations = {
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
#ifdef CONFIG_UBIFS_FS_XATTR
@@ -1562,14 +1561,14 @@
#endif
};
-struct inode_operations ubifs_symlink_inode_operations = {
+const struct inode_operations ubifs_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ubifs_follow_link,
.setattr = ubifs_setattr,
.getattr = ubifs_getattr,
};
-struct file_operations ubifs_file_operations = {
+const struct file_operations ubifs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index 9832f9a..a711d33 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -31,6 +31,26 @@
* to be reused. Garbage collection will cause the number of dirty index nodes
* to grow, however sufficient space is reserved for the index to ensure the
* commit will never run out of space.
+ *
+ * Notes about dead watermark. At current UBIFS implementation we assume that
+ * LEBs which have less than @c->dead_wm bytes of free + dirty space are full
+ * and not worth garbage-collecting. The dead watermark is one min. I/O unit
+ * size, or min. UBIFS node size, depending on what is greater. Indeed, UBIFS
+ * Garbage Collector has to synchronize the GC head's write buffer before
+ * returning, so this is about wasting one min. I/O unit. However, UBIFS GC can
+ * actually reclaim even very small pieces of dirty space by garbage collecting
+ * enough dirty LEBs, but we do not bother doing this at this implementation.
+ *
+ * Notes about dark watermark. The results of GC work depends on how big are
+ * the UBIFS nodes GC deals with. Large nodes make GC waste more space. Indeed,
+ * if GC move data from LEB A to LEB B and nodes in LEB A are large, GC would
+ * have to waste large pieces of free space at the end of LEB B, because nodes
+ * from LEB A would not fit. And the worst situation is when all nodes are of
+ * maximum size. So dark watermark is the amount of free + dirty space in LEB
+ * which are guaranteed to be reclaimable. If LEB has less space, the GC migh
+ * be unable to reclaim it. So, LEBs with free + dirty greater than dark
+ * watermark are "good" LEBs from GC's point of few. The other LEBs are not so
+ * good, and GC takes extra care when moving them.
*/
#include <linux/pagemap.h>
@@ -381,7 +401,7 @@
/*
* Don't release the LEB until after the next commit, because
- * it may contain date which is needed for recovery. So
+ * it may contain data which is needed for recovery. So
* although we freed this LEB, it will become usable only after
* the commit.
*/
@@ -810,8 +830,9 @@
* ubifs_destroy_idx_gc - destroy idx_gc list.
* @c: UBIFS file-system description object
*
- * This function destroys the idx_gc list. It is called when unmounting or
- * remounting read-only so locks are not needed.
+ * This function destroys the @c->idx_gc list. It is called when unmounting
+ * so locks are not needed. Returns zero in case of success and a negative
+ * error code in case of failure.
*/
void ubifs_destroy_idx_gc(struct ubifs_info *c)
{
@@ -824,7 +845,6 @@
list_del(&idx_gc->list);
kfree(idx_gc);
}
-
}
/**
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 0168271..e8e632a 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -29,7 +29,7 @@
* would have been wasted for padding to the nearest minimal I/O unit boundary.
* Instead, data first goes to the write-buffer and is flushed when the
* buffer is full or when it is not used for some time (by timer). This is
- * similarto the mechanism is used by JFFS2.
+ * similar to the mechanism is used by JFFS2.
*
* Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by
* mutexes defined inside these objects. Since sometimes upper-level code
@@ -75,7 +75,7 @@
* @lnum: logical eraseblock number
* @offs: offset within the logical eraseblock
* @quiet: print no messages
- * @chk_crc: indicates whether to always check the CRC
+ * @must_chk_crc: indicates whether to always check the CRC
*
* This function checks node magic number and CRC checksum. This function also
* validates node length to prevent UBIFS from becoming crazy when an attacker
@@ -83,11 +83,17 @@
* node length in the common header could cause UBIFS to read memory outside of
* allocated buffer when checking the CRC checksum.
*
- * This function returns zero in case of success %-EUCLEAN in case of bad CRC
- * or magic.
+ * This function may skip data nodes CRC checking if @c->no_chk_data_crc is
+ * true, which is controlled by corresponding UBIFS mount option. However, if
+ * @must_chk_crc is true, then @c->no_chk_data_crc is ignored and CRC is
+ * checked. Similarly, if @c->always_chk_crc is true, @c->no_chk_data_crc is
+ * ignored and CRC is checked.
+ *
+ * This function returns zero in case of success and %-EUCLEAN in case of bad
+ * CRC or magic.
*/
int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
- int offs, int quiet, int chk_crc)
+ int offs, int quiet, int must_chk_crc)
{
int err = -EINVAL, type, node_len;
uint32_t crc, node_crc, magic;
@@ -123,9 +129,9 @@
node_len > c->ranges[type].max_len)
goto out_len;
- if (!chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc)
- if (c->no_chk_data_crc)
- return 0;
+ if (!must_chk_crc && type == UBIFS_DATA_NODE && !c->always_chk_crc &&
+ c->no_chk_data_crc)
+ return 0;
crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
node_crc = le32_to_cpu(ch->crc);
diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c
index 9b7c54e..a11ca09 100644
--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -208,7 +208,7 @@
offs = 0;
out:
- err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, UBI_SHORTTERM);
+ err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, wbuf->dtype);
if (err)
goto out_unlock;
diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c
index dfd2bce..4cdd284 100644
--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -635,10 +635,10 @@
* @c: UBIFS file-system description object
* @st: return statistics
*/
-void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *st)
+void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *lst)
{
spin_lock(&c->space_lock);
- memcpy(st, &c->lst, sizeof(struct ubifs_lp_stats));
+ memcpy(lst, &c->lst, sizeof(struct ubifs_lp_stats));
spin_unlock(&c->space_lock);
}
@@ -678,6 +678,9 @@
out:
ubifs_release_lprops(c);
+ if (err)
+ ubifs_err("cannot change properties of LEB %d, error %d",
+ lnum, err);
return err;
}
@@ -714,6 +717,9 @@
out:
ubifs_release_lprops(c);
+ if (err)
+ ubifs_err("cannot update properties of LEB %d, error %d",
+ lnum, err);
return err;
}
@@ -737,6 +743,8 @@
lpp = ubifs_lpt_lookup(c, lnum);
if (IS_ERR(lpp)) {
err = PTR_ERR(lpp);
+ ubifs_err("cannot read properties of LEB %d, error %d",
+ lnum, err);
goto out;
}
diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c
index 96ca957..3216a1f 100644
--- a/fs/ubifs/lpt_commit.c
+++ b/fs/ubifs/lpt_commit.c
@@ -556,23 +556,23 @@
}
/**
- * next_pnode - find next pnode.
+ * next_pnode_to_dirty - find next pnode to dirty.
* @c: UBIFS file-system description object
* @pnode: pnode
*
- * This function returns the next pnode or %NULL if there are no more pnodes.
+ * This function returns the next pnode to dirty or %NULL if there are no more
+ * pnodes. Note that pnodes that have never been written (lnum == 0) are
+ * skipped.
*/
-static struct ubifs_pnode *next_pnode(struct ubifs_info *c,
- struct ubifs_pnode *pnode)
+static struct ubifs_pnode *next_pnode_to_dirty(struct ubifs_info *c,
+ struct ubifs_pnode *pnode)
{
struct ubifs_nnode *nnode;
int iip;
/* Try to go right */
nnode = pnode->parent;
- iip = pnode->iip + 1;
- if (iip < UBIFS_LPT_FANOUT) {
- /* We assume here that LEB zero is never an LPT LEB */
+ for (iip = pnode->iip + 1; iip < UBIFS_LPT_FANOUT; iip++) {
if (nnode->nbranch[iip].lnum)
return ubifs_get_pnode(c, nnode, iip);
}
@@ -583,8 +583,11 @@
nnode = nnode->parent;
if (!nnode)
return NULL;
- /* We assume here that LEB zero is never an LPT LEB */
- } while (iip >= UBIFS_LPT_FANOUT || !nnode->nbranch[iip].lnum);
+ for (; iip < UBIFS_LPT_FANOUT; iip++) {
+ if (nnode->nbranch[iip].lnum)
+ break;
+ }
+ } while (iip >= UBIFS_LPT_FANOUT);
/* Go right */
nnode = ubifs_get_nnode(c, nnode, iip);
@@ -593,12 +596,29 @@
/* Go down to level 1 */
while (nnode->level > 1) {
- nnode = ubifs_get_nnode(c, nnode, 0);
+ for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++) {
+ if (nnode->nbranch[iip].lnum)
+ break;
+ }
+ if (iip >= UBIFS_LPT_FANOUT) {
+ /*
+ * Should not happen, but we need to keep going
+ * if it does.
+ */
+ iip = 0;
+ }
+ nnode = ubifs_get_nnode(c, nnode, iip);
if (IS_ERR(nnode))
return (void *)nnode;
}
- return ubifs_get_pnode(c, nnode, 0);
+ for (iip = 0; iip < UBIFS_LPT_FANOUT; iip++)
+ if (nnode->nbranch[iip].lnum)
+ break;
+ if (iip >= UBIFS_LPT_FANOUT)
+ /* Should not happen, but we need to keep going if it does */
+ iip = 0;
+ return ubifs_get_pnode(c, nnode, iip);
}
/**
@@ -688,7 +708,7 @@
pnode = pnode_lookup(c, 0);
while (pnode) {
do_make_pnode_dirty(c, pnode);
- pnode = next_pnode(c, pnode);
+ pnode = next_pnode_to_dirty(c, pnode);
if (IS_ERR(pnode))
return PTR_ERR(pnode);
}
diff --git a/fs/ubifs/master.c b/fs/ubifs/master.c
index 71d5493..a88f338 100644
--- a/fs/ubifs/master.c
+++ b/fs/ubifs/master.c
@@ -354,7 +354,7 @@
int err, lnum, offs, len;
if (c->ro_media)
- return -EINVAL;
+ return -EROFS;
lnum = UBIFS_MST_LNUM;
offs = c->mst_offs + c->mst_node_alsz;
diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c
index 9e6f403..152a7b3 100644
--- a/fs/ubifs/orphan.c
+++ b/fs/ubifs/orphan.c
@@ -46,7 +46,7 @@
* Orphans are accumulated in a rb-tree. When an inode's link count drops to
* zero, the inode number is added to the rb-tree. It is removed from the tree
* when the inode is deleted. Any new orphans that are in the orphan tree when
- * the commit is run, are written to the orphan area in 1 or more orph nodes.
+ * the commit is run, are written to the orphan area in 1 or more orphan nodes.
* If the orphan area is full, it is consolidated to make space. There is
* always enough space because validation prevents the user from creating more
* than the maximum number of orphans allowed.
@@ -231,7 +231,7 @@
}
/**
- * do_write_orph_node - write a node
+ * do_write_orph_node - write a node to the orphan head.
* @c: UBIFS file-system description object
* @len: length of node
* @atomic: write atomically
@@ -264,11 +264,11 @@
}
/**
- * write_orph_node - write an orph node
+ * write_orph_node - write an orphan node.
* @c: UBIFS file-system description object
* @atomic: write atomically
*
- * This function builds an orph node from the cnext list and writes it to the
+ * This function builds an orphan node from the cnext list and writes it to the
* orphan head. On success, %0 is returned, otherwise a negative error code
* is returned.
*/
@@ -326,11 +326,11 @@
}
/**
- * write_orph_nodes - write orph nodes until there are no more to commit
+ * write_orph_nodes - write orphan nodes until there are no more to commit.
* @c: UBIFS file-system description object
* @atomic: write atomically
*
- * This function writes orph nodes for all the orphans to commit. On success,
+ * This function writes orphan nodes for all the orphans to commit. On success,
* %0 is returned, otherwise a negative error code is returned.
*/
static int write_orph_nodes(struct ubifs_info *c, int atomic)
@@ -478,14 +478,14 @@
}
/**
- * clear_orphans - erase all LEBs used for orphans.
+ * ubifs_clear_orphans - erase all LEBs used for orphans.
* @c: UBIFS file-system description object
*
* If recovery is not required, then the orphans from the previous session
* are not needed. This function locates the LEBs used to record
* orphans, and un-maps them.
*/
-static int clear_orphans(struct ubifs_info *c)
+int ubifs_clear_orphans(struct ubifs_info *c)
{
int lnum, err;
@@ -547,9 +547,9 @@
* do_kill_orphans - remove orphan inodes from the index.
* @c: UBIFS file-system description object
* @sleb: scanned LEB
- * @last_cmt_no: cmt_no of last orph node read is passed and returned here
+ * @last_cmt_no: cmt_no of last orphan node read is passed and returned here
* @outofdate: whether the LEB is out of date is returned here
- * @last_flagged: whether the end orph node is encountered
+ * @last_flagged: whether the end orphan node is encountered
*
* This function is a helper to the 'kill_orphans()' function. It goes through
* every orphan node in a LEB and for every inode number recorded, removes
@@ -580,8 +580,8 @@
/*
* The commit number on the master node may be less, because
* of a failed commit. If there are several failed commits in a
- * row, the commit number written on orph nodes will continue to
- * increase (because the commit number is adjusted here) even
+ * row, the commit number written on orphan nodes will continue
+ * to increase (because the commit number is adjusted here) even
* though the commit number on the master node stays the same
* because the master node has not been re-written.
*/
@@ -589,9 +589,9 @@
c->cmt_no = cmt_no;
if (cmt_no < *last_cmt_no && *last_flagged) {
/*
- * The last orph node had a higher commit number and was
- * flagged as the last written for that commit number.
- * That makes this orph node, out of date.
+ * The last orphan node had a higher commit number and
+ * was flagged as the last written for that commit
+ * number. That makes this orphan node, out of date.
*/
if (!first) {
ubifs_err("out of order commit number %llu in "
@@ -658,10 +658,10 @@
/*
* Orph nodes always start at c->orph_first and are written to each
* successive LEB in turn. Generally unused LEBs will have been unmapped
- * but may contain out of date orph nodes if the unmap didn't go
- * through. In addition, the last orph node written for each commit is
+ * but may contain out of date orphan nodes if the unmap didn't go
+ * through. In addition, the last orphan node written for each commit is
* marked (top bit of orph->cmt_no is set to 1). It is possible that
- * there are orph nodes from the next commit (i.e. the commit did not
+ * there are orphan nodes from the next commit (i.e. the commit did not
* complete successfully). In that case, no orphans will have been lost
* due to the way that orphans are written, and any orphans added will
* be valid orphans anyway and so can be deleted.
@@ -718,7 +718,7 @@
if (unclean)
err = kill_orphans(c);
else if (!read_only)
- err = clear_orphans(c);
+ err = ubifs_clear_orphans(c);
return err;
}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 89556ee..1182b66 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -397,6 +397,7 @@
buf->f_namelen = UBIFS_MAX_NLEN;
buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
+ ubifs_assert(buf->f_bfree <= c->block_cnt);
return 0;
}
@@ -432,33 +433,24 @@
int i, err;
struct ubifs_info *c = sb->s_fs_info;
struct writeback_control wbc = {
- .sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
+ .sync_mode = WB_SYNC_ALL,
.range_start = 0,
.range_end = LLONG_MAX,
.nr_to_write = LONG_MAX,
};
/*
- * Note by akpm about WB_SYNC_NONE used above: zero @wait is just an
- * advisory thing to help the file system shove lots of data into the
- * queues. If some gets missed then it'll be picked up on the second
+ * Zero @wait is just an advisory thing to help the file system shove
+ * lots of data into the queues, and there will be the second
* '->sync_fs()' call, with non-zero @wait.
*/
+ if (!wait)
+ return 0;
if (sb->s_flags & MS_RDONLY)
return 0;
/*
- * Synchronize write buffers, because 'ubifs_run_commit()' does not
- * do this if it waits for an already running commit.
- */
- for (i = 0; i < c->jhead_cnt; i++) {
- err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
- if (err)
- return err;
- }
-
- /*
* VFS calls '->sync_fs()' before synchronizing all dirty inodes and
* pages, so synchronize them first, then commit the journal. Strictly
* speaking, it is not necessary to commit the journal here,
@@ -469,6 +461,16 @@
*/
generic_sync_sb_inodes(sb, &wbc);
+ /*
+ * Synchronize write buffers, because 'ubifs_run_commit()' does not
+ * do this if it waits for an already running commit.
+ */
+ for (i = 0; i < c->jhead_cnt; i++) {
+ err = ubifs_wbuf_sync(&c->jheads[i].wbuf);
+ if (err)
+ return err;
+ }
+
err = ubifs_run_commit(c);
if (err)
return err;
@@ -572,15 +574,8 @@
c->ranges[UBIFS_IDX_NODE].max_len = INT_MAX;
/*
- * Initialize dead and dark LEB space watermarks.
- *
- * Dead space is the space which cannot be used. Its watermark is
- * equivalent to min. I/O unit or minimum node size if it is greater
- * then min. I/O unit.
- *
- * Dark space is the space which might be used, or might not, depending
- * on which node should be written to the LEB. Its watermark is
- * equivalent to maximum UBIFS node size.
+ * Initialize dead and dark LEB space watermarks. See gc.c for comments
+ * about these values.
*/
c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
@@ -741,12 +736,12 @@
* take_gc_lnum - reserve GC LEB.
* @c: UBIFS file-system description object
*
- * This function ensures that the LEB reserved for garbage collection is
- * unmapped and is marked as "taken" in lprops. We also have to set free space
- * to LEB size and dirty space to zero, because lprops may contain out-of-date
- * information if the file-system was un-mounted before it has been committed.
- * This function returns zero in case of success and a negative error code in
- * case of failure.
+ * This function ensures that the LEB reserved for garbage collection is marked
+ * as "taken" in lprops. We also have to set free space to LEB size and dirty
+ * space to zero, because lprops may contain out-of-date information if the
+ * file-system was un-mounted before it has been committed. This function
+ * returns zero in case of success and a negative error code in case of
+ * failure.
*/
static int take_gc_lnum(struct ubifs_info *c)
{
@@ -757,10 +752,6 @@
return -EINVAL;
}
- err = ubifs_leb_unmap(c, c->gc_lnum);
- if (err)
- return err;
-
/* And we have to tell lprops that this LEB is taken */
err = ubifs_change_one_lp(c, c->gc_lnum, c->leb_size, 0,
LPROPS_TAKEN, 0, 0);
@@ -966,13 +957,16 @@
token = match_token(p, tokens, args);
switch (token) {
+ /*
+ * %Opt_fast_unmount and %Opt_norm_unmount options are ignored.
+ * We accepte them in order to be backware-compatible. But this
+ * should be removed at some point.
+ */
case Opt_fast_unmount:
c->mount_opts.unmount_mode = 2;
- c->fast_unmount = 1;
break;
case Opt_norm_unmount:
c->mount_opts.unmount_mode = 1;
- c->fast_unmount = 0;
break;
case Opt_bulk_read:
c->mount_opts.bulk_read = 2;
@@ -1094,12 +1088,7 @@
ubifs_err("insufficient free space to mount in read/write mode");
dbg_dump_budg(c);
dbg_dump_lprops(c);
- /*
- * We return %-EINVAL instead of %-ENOSPC because it seems to
- * be the closest error code mentioned in the mount function
- * documentation.
- */
- return -EINVAL;
+ return -ENOSPC;
}
return 0;
}
@@ -1286,10 +1275,19 @@
if (err)
goto out_orphans;
err = ubifs_rcvry_gc_commit(c);
- } else
+ } else {
err = take_gc_lnum(c);
- if (err)
- goto out_orphans;
+ if (err)
+ goto out_orphans;
+
+ /*
+ * GC LEB may contain garbage if there was an unclean
+ * reboot, and it should be un-mapped.
+ */
+ err = ubifs_leb_unmap(c, c->gc_lnum);
+ if (err)
+ return err;
+ }
err = dbg_check_lprops(c);
if (err)
@@ -1298,6 +1296,16 @@
err = ubifs_recover_size(c);
if (err)
goto out_orphans;
+ } else {
+ /*
+ * Even if we mount read-only, we have to set space in GC LEB
+ * to proper value because this affects UBIFS free space
+ * reporting. We do not want to have a situation when
+ * re-mounting from R/O to R/W changes amount of free space.
+ */
+ err = take_gc_lnum(c);
+ if (err)
+ goto out_orphans;
}
spin_lock(&ubifs_infos_lock);
@@ -1310,14 +1318,17 @@
else {
c->need_recovery = 0;
ubifs_msg("recovery completed");
+ /* GC LEB has to be empty and taken at this point */
+ ubifs_assert(c->lst.taken_empty_lebs == 1);
}
- }
+ } else
+ ubifs_assert(c->lst.taken_empty_lebs == 1);
- err = dbg_debugfs_init_fs(c);
+ err = dbg_check_filesystem(c);
if (err)
goto out_infos;
- err = dbg_check_filesystem(c);
+ err = dbg_debugfs_init_fs(c);
if (err)
goto out_infos;
@@ -1351,7 +1362,6 @@
c->uuid[4], c->uuid[5], c->uuid[6], c->uuid[7],
c->uuid[8], c->uuid[9], c->uuid[10], c->uuid[11],
c->uuid[12], c->uuid[13], c->uuid[14], c->uuid[15]);
- dbg_msg("fast unmount: %d", c->fast_unmount);
dbg_msg("big_lpt %d", c->big_lpt);
dbg_msg("log LEBs: %d (%d - %d)",
c->log_lebs, UBIFS_LOG_LNUM, c->log_last);
@@ -1475,10 +1485,8 @@
{
int err, lnum;
- if (c->ro_media)
- return -EINVAL;
-
mutex_lock(&c->umount_mutex);
+ dbg_save_space_info(c);
c->remounting_rw = 1;
c->always_chk_crc = 1;
@@ -1514,6 +1522,12 @@
err = ubifs_recover_inl_heads(c, c->sbuf);
if (err)
goto out;
+ } else {
+ /* A readonly mount is not allowed to have orphans */
+ ubifs_assert(c->tot_orphans == 0);
+ err = ubifs_clear_orphans(c);
+ if (err)
+ goto out;
}
if (!(c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY))) {
@@ -1569,7 +1583,7 @@
if (c->need_recovery)
err = ubifs_rcvry_gc_commit(c);
else
- err = take_gc_lnum(c);
+ err = ubifs_leb_unmap(c, c->gc_lnum);
if (err)
goto out;
@@ -1582,8 +1596,9 @@
c->vfs_sb->s_flags &= ~MS_RDONLY;
c->remounting_rw = 0;
c->always_chk_crc = 0;
+ err = dbg_check_space_info(c);
mutex_unlock(&c->umount_mutex);
- return 0;
+ return err;
out:
vfree(c->orph_buf);
@@ -1603,43 +1618,18 @@
}
/**
- * commit_on_unmount - commit the journal when un-mounting.
- * @c: UBIFS file-system description object
- *
- * This function is called during un-mounting and re-mounting, and it commits
- * the journal unless the "fast unmount" mode is enabled.
- */
-static void commit_on_unmount(struct ubifs_info *c)
-{
- struct super_block *sb = c->vfs_sb;
- long long bud_bytes;
-
- /*
- * This function is called before the background thread is stopped, so
- * we may race with ongoing commit, which means we have to take
- * @c->bud_lock to access @c->bud_bytes.
- */
- spin_lock(&c->buds_lock);
- bud_bytes = c->bud_bytes;
- spin_unlock(&c->buds_lock);
-
- if (!c->fast_unmount && !(sb->s_flags & MS_RDONLY) && bud_bytes)
- ubifs_run_commit(c);
-}
-
-/**
* ubifs_remount_ro - re-mount in read-only mode.
* @c: UBIFS file-system description object
*
- * We rely on VFS to have stopped writing. Possibly the background thread could
- * be running a commit, however kthread_stop will wait in that case.
+ * We assume VFS has stopped writing. Possibly the background thread could be
+ * running a commit, however kthread_stop will wait in that case.
*/
static void ubifs_remount_ro(struct ubifs_info *c)
{
int i, err;
ubifs_assert(!c->need_recovery);
- commit_on_unmount(c);
+ ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY));
mutex_lock(&c->umount_mutex);
if (c->bgt) {
@@ -1647,27 +1637,29 @@
c->bgt = NULL;
}
+ dbg_save_space_info(c);
+
for (i = 0; i < c->jhead_cnt; i++) {
ubifs_wbuf_sync(&c->jheads[i].wbuf);
del_timer_sync(&c->jheads[i].wbuf.timer);
}
- if (!c->ro_media) {
- c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
- c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
- c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
- err = ubifs_write_master(c);
- if (err)
- ubifs_ro_mode(c, err);
- }
+ c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY);
+ c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS);
+ c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum);
+ err = ubifs_write_master(c);
+ if (err)
+ ubifs_ro_mode(c, err);
- ubifs_destroy_idx_gc(c);
free_wbufs(c);
vfree(c->orph_buf);
c->orph_buf = NULL;
vfree(c->ileb_buf);
c->ileb_buf = NULL;
ubifs_lpt_free(c, 1);
+ err = dbg_check_space_info(c);
+ if (err)
+ ubifs_ro_mode(c, err);
mutex_unlock(&c->umount_mutex);
}
@@ -1760,11 +1752,20 @@
}
if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
+ if (c->ro_media) {
+ ubifs_msg("cannot re-mount due to prior errors");
+ return -EROFS;
+ }
err = ubifs_remount_rw(c);
if (err)
return err;
- } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY))
+ } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) {
+ if (c->ro_media) {
+ ubifs_msg("cannot re-mount due to prior errors");
+ return -EROFS;
+ }
ubifs_remount_ro(c);
+ }
if (c->bulk_read == 1)
bu_init(c);
@@ -1774,10 +1775,11 @@
c->bu.buf = NULL;
}
+ ubifs_assert(c->lst.taken_empty_lebs == 1);
return 0;
}
-struct super_operations ubifs_super_operations = {
+const struct super_operations ubifs_super_operations = {
.alloc_inode = ubifs_alloc_inode,
.destroy_inode = ubifs_destroy_inode,
.put_super = ubifs_put_super,
@@ -2044,15 +2046,6 @@
static void ubifs_kill_sb(struct super_block *sb)
{
- struct ubifs_info *c = sb->s_fs_info;
-
- /*
- * We do 'commit_on_unmount()' here instead of 'ubifs_put_super()'
- * in order to be outside BKL.
- */
- if (sb->s_root)
- commit_on_unmount(c);
- /* The un-mount routine is actually done in put_super() */
generic_shutdown_super(sb);
}
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index f7e36f5..fa28a84 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -443,6 +443,11 @@
* This function performs that same function as ubifs_read_node except that
* it does not require that there is actually a node present and instead
* the return code indicates if a node was read.
+ *
+ * Note, this function does not check CRC of data nodes if @c->no_chk_data_crc
+ * is true (it is controlled by corresponding mount option). However, if
+ * @c->always_chk_crc is true, @c->no_chk_data_crc is ignored and CRC is always
+ * checked.
*/
static int try_read_node(const struct ubifs_info *c, void *buf, int type,
int len, int lnum, int offs)
@@ -470,9 +475,8 @@
if (node_len != len)
return 0;
- if (type == UBIFS_DATA_NODE && !c->always_chk_crc)
- if (c->no_chk_data_crc)
- return 0;
+ if (type == UBIFS_DATA_NODE && !c->always_chk_crc && c->no_chk_data_crc)
+ return 1;
crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8);
node_crc = le32_to_cpu(ch->crc);
@@ -1506,7 +1510,7 @@
*
* Note, if the bulk-read buffer length (@bu->buf_len) is known, this function
* makes sure bulk-read nodes fit the buffer. Otherwise, this function prepares
- * maxumum possible amount of nodes for bulk-read.
+ * maximum possible amount of nodes for bulk-read.
*/
int ubifs_tnc_get_bu_keys(struct ubifs_info *c, struct bu_info *bu)
{
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index fc2a4cc..039a68b 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -426,9 +426,9 @@
* LEB properties flags.
*
* LPROPS_UNCAT: not categorized
- * LPROPS_DIRTY: dirty > 0, not index
+ * LPROPS_DIRTY: dirty > free, dirty >= @c->dead_wm, not index
* LPROPS_DIRTY_IDX: dirty + free > @c->min_idx_node_sze and index
- * LPROPS_FREE: free > 0, not empty, not index
+ * LPROPS_FREE: free > 0, dirty < @c->dead_wm, not empty, not index
* LPROPS_HEAP_CNT: number of heaps used for storing categorized LEBs
* LPROPS_EMPTY: LEB is empty, not taken
* LPROPS_FREEABLE: free + dirty == leb_size, not index, not taken
@@ -961,7 +961,6 @@
* @cs_lock: commit state lock
* @cmt_wq: wait queue to sleep on if the log is full and a commit is running
*
- * @fast_unmount: do not run journal commit before un-mounting
* @big_lpt: flag that LPT is too big to write whole during commit
* @no_chk_data_crc: do not check CRCs when reading data nodes (except during
* recovery)
@@ -1202,7 +1201,6 @@
spinlock_t cs_lock;
wait_queue_head_t cmt_wq;
- unsigned int fast_unmount:1;
unsigned int big_lpt:1;
unsigned int no_chk_data_crc:1;
unsigned int bulk_read:1;
@@ -1405,13 +1403,13 @@
extern spinlock_t ubifs_infos_lock;
extern atomic_long_t ubifs_clean_zn_cnt;
extern struct kmem_cache *ubifs_inode_slab;
-extern struct super_operations ubifs_super_operations;
-extern struct address_space_operations ubifs_file_address_operations;
-extern struct file_operations ubifs_file_operations;
-extern struct inode_operations ubifs_file_inode_operations;
-extern struct file_operations ubifs_dir_operations;
-extern struct inode_operations ubifs_dir_inode_operations;
-extern struct inode_operations ubifs_symlink_inode_operations;
+extern const struct super_operations ubifs_super_operations;
+extern const struct address_space_operations ubifs_file_address_operations;
+extern const struct file_operations ubifs_file_operations;
+extern const struct inode_operations ubifs_file_inode_operations;
+extern const struct file_operations ubifs_dir_operations;
+extern const struct inode_operations ubifs_dir_inode_operations;
+extern const struct inode_operations ubifs_symlink_inode_operations;
extern struct backing_dev_info ubifs_backing_dev_info;
extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
@@ -1428,7 +1426,7 @@
int ubifs_write_node(struct ubifs_info *c, void *node, int len, int lnum,
int offs, int dtype);
int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum,
- int offs, int quiet, int chk_crc);
+ int offs, int quiet, int must_chk_crc);
void ubifs_prepare_node(struct ubifs_info *c, void *buf, int len, int pad);
void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last);
int ubifs_io_init(struct ubifs_info *c);
@@ -1495,6 +1493,7 @@
void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
struct ubifs_budget_req *req);
long long ubifs_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space_nolock(struct ubifs_info *c);
int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
void ubifs_convert_page_budget(struct ubifs_info *c);
long long ubifs_reported_space(const struct ubifs_info *c, long long free);
@@ -1603,6 +1602,7 @@
int ubifs_orphan_start_commit(struct ubifs_info *c);
int ubifs_orphan_end_commit(struct ubifs_info *c);
int ubifs_mount_orphans(struct ubifs_info *c, int unclean, int read_only);
+int ubifs_clear_orphans(struct ubifs_info *c);
/* lpt.c */
int ubifs_calc_lpt_geom(struct ubifs_info *c);
@@ -1646,7 +1646,7 @@
const struct ubifs_lprops *lp,
int free, int dirty, int flags,
int idx_gc_cnt);
-void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *stats);
+void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *lst);
void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops,
int cat);
void ubifs_replace_cat(struct ubifs_info *c, struct ubifs_lprops *old_lprops,
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 2ed0353..a608e72 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -371,7 +371,11 @@
/* flush inodes and push all remaining buffers out to disk */
xfs_quiesce_fs(mp);
- ASSERT_ALWAYS(atomic_read(&mp->m_active_trans) == 0);
+ /*
+ * Just warn here till VFS can correctly support
+ * read-only remount without racing.
+ */
+ WARN_ON(atomic_read(&mp->m_active_trans) != 0);
/* Push the superblock and write an unmount record */
error = xfs_log_sbcount(mp, 1);
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index b4c1ee7..f8278cf 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -55,17 +55,11 @@
struct file *file, *target_file;
int error = 0;
- sxp = kmem_alloc(sizeof(xfs_swapext_t), KM_MAYFAIL);
- if (!sxp) {
- error = XFS_ERROR(ENOMEM);
- goto out;
- }
-
/* Pull information for the target fd */
file = fget((int)sxp->sx_fdtarget);
if (!file) {
error = XFS_ERROR(EINVAL);
- goto out_free_sxp;
+ goto out;
}
if (!(file->f_mode & FMODE_WRITE) || (file->f_flags & O_APPEND)) {
@@ -109,8 +103,6 @@
fput(target_file);
out_put_file:
fput(file);
- out_free_sxp:
- kmem_free(sxp);
out:
return error;
}
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index 35cca98..b1047de 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -70,16 +70,21 @@
xfs_buf_t *
xlog_get_bp(
xlog_t *log,
- int num_bblks)
+ int nbblks)
{
- ASSERT(num_bblks > 0);
+ if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+ xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+ XFS_ERROR_REPORT("xlog_get_bp(1)",
+ XFS_ERRLEVEL_HIGH, log->l_mp);
+ return NULL;
+ }
if (log->l_sectbb_log) {
- if (num_bblks > 1)
- num_bblks += XLOG_SECTOR_ROUNDUP_BBCOUNT(log, 1);
- num_bblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, num_bblks);
+ if (nbblks > 1)
+ nbblks += XLOG_SECTOR_ROUNDUP_BBCOUNT(log, 1);
+ nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
}
- return xfs_buf_get_noaddr(BBTOB(num_bblks), log->l_mp->m_logdev_targp);
+ return xfs_buf_get_noaddr(BBTOB(nbblks), log->l_mp->m_logdev_targp);
}
void
@@ -102,6 +107,13 @@
{
int error;
+ if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+ xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+ XFS_ERROR_REPORT("xlog_bread(1)",
+ XFS_ERRLEVEL_HIGH, log->l_mp);
+ return EFSCORRUPTED;
+ }
+
if (log->l_sectbb_log) {
blk_no = XLOG_SECTOR_ROUNDDOWN_BLKNO(log, blk_no);
nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
@@ -139,6 +151,13 @@
{
int error;
+ if (nbblks <= 0 || nbblks > log->l_logBBsize) {
+ xlog_warn("XFS: Invalid block length (0x%x) given for buffer", nbblks);
+ XFS_ERROR_REPORT("xlog_bwrite(1)",
+ XFS_ERRLEVEL_HIGH, log->l_mp);
+ return EFSCORRUPTED;
+ }
+
if (log->l_sectbb_log) {
blk_no = XLOG_SECTOR_ROUNDDOWN_BLKNO(log, blk_no);
nbblks = XLOG_SECTOR_ROUNDUP_BBCOUNT(log, nbblks);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a53318b..08a86d5 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -731,12 +731,17 @@
static inline int ata_id_is_cfa(const u16 *id)
{
- if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */
+ if (id[ATA_ID_CONFIG] == 0x848A) /* Traditional CF */
return 1;
- /* Could be CF hiding as standard ATA */
- if (ata_id_major_version(id) >= 3 &&
- id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
- (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
+ /*
+ * CF specs don't require specific value in the word 0 anymore and yet
+ * they forbid to report the ATA version in the word 80 and require the
+ * CFA feature set support to be indicated in the word 83 in this case.
+ * Unfortunately, some cards only follow either of this requirements,
+ * and while those that don't indicate CFA feature support need some
+ * sort of quirk list, it seems impractical for the ones that do...
+ */
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004)
return 1;
return 0;
}
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 818fe21..31527e1 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -960,6 +960,21 @@
extern int num_registered_fb;
extern struct class *fb_class;
+static inline int lock_fb_info(struct fb_info *info)
+{
+ mutex_lock(&info->lock);
+ if (!info->fbops) {
+ mutex_unlock(&info->lock);
+ return 0;
+ }
+ return 1;
+}
+
+static inline void unlock_fb_info(struct fb_info *info)
+{
+ mutex_unlock(&info->lock);
+}
+
static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
u8 *src, u32 s_pitch, u32 height)
{
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 343df9e..7fa3718 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -480,7 +480,8 @@
/*
* swap - swap value of @a and @b
*/
-#define swap(a, b) ({ typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; })
+#define swap(a, b) \
+ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)
/**
* container_of - cast a member of a structure out to the containing structure
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bca3ba2..5d87bc0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -380,6 +380,7 @@
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
+ ATA_HORKAGE_1_5_GBPS = (1 << 13), /* force 1.5 Gbps */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
@@ -580,7 +581,7 @@
acpi_handle acpi_handle;
union acpi_object *gtf_cache;
#endif
- /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+ /* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
unsigned int class; /* ATA_DEV_xxx */
unsigned long unpark_deadline;
@@ -605,20 +606,22 @@
u16 heads; /* Number of heads */
u16 sectors; /* Number of sectors per track */
- /* error history */
- int spdn_cnt;
- struct ata_ering ering;
-
union {
u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
u32 gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
};
+
+ /* error history */
+ int spdn_cnt;
+ /* ering is CLEAR_END, read comment above CLEAR_END */
+ struct ata_ering ering;
};
-/* Offset into struct ata_device. Fields above it are maintained
- * acress device init. Fields below are zeroed.
+/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+ * cleared to zero on ata_dev_init().
*/
-#define ATA_DEVICE_CLEAR_OFFSET offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_BEGIN offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_END offsetof(struct ata_device, ering)
struct ata_eh_info {
struct ata_device *dev; /* offending device */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 5a7c763..2127e95 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -443,6 +443,7 @@
* @utime: time spent in user mode, in &cputime_t units
* @stime: time spent in kernel mode, in &cputime_t units
* @sum_exec_runtime: total time spent on the CPU, in nanoseconds
+ * @lock: lock for fields in this struct
*
* This structure groups together three kinds of CPU time that are
* tracked for threads and thread groups. Most things considering
diff --git a/include/linux/wait.h b/include/linux/wait.h
index ef609f8..a210ede 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -132,6 +132,8 @@
list_del(&old->task_list);
}
+void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+ int nr_exclusive, int sync, void *key);
void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
extern void __wake_up_locked(wait_queue_head_t *q, unsigned int mode);
extern void __wake_up_sync(wait_queue_head_t *q, unsigned int mode, int nr);
@@ -333,16 +335,19 @@
for (;;) { \
prepare_to_wait_exclusive(&wq, &__wait, \
TASK_INTERRUPTIBLE); \
- if (condition) \
+ if (condition) { \
+ finish_wait(&wq, &__wait); \
break; \
+ } \
if (!signal_pending(current)) { \
schedule(); \
continue; \
} \
ret = -ERESTARTSYS; \
+ abort_exclusive_wait(&wq, &__wait, \
+ TASK_INTERRUPTIBLE, NULL); \
break; \
} \
- finish_wait(&wq, &__wait); \
} while (0)
#define wait_event_interruptible_exclusive(wq, condition) \
@@ -431,6 +436,8 @@
void prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state);
void prepare_to_wait_exclusive(wait_queue_head_t *q, wait_queue_t *wait, int state);
void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
+void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
+ unsigned int mode, void *key);
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
diff --git a/include/video/aty128.h b/include/video/aty128.h
index 7079beb..51ac69f 100644
--- a/include/video/aty128.h
+++ b/include/video/aty128.h
@@ -21,9 +21,9 @@
#define I2C_CNTL_1 0x0094
#define PALETTE_INDEX 0x00b0
#define PALETTE_DATA 0x00b4
-#define CONFIG_CNTL 0x00e0
+#define CNFG_CNTL 0x00e0
#define GEN_RESET_CNTL 0x00f0
-#define CONFIG_MEMSIZE 0x00f8
+#define CNFG_MEMSIZE 0x00f8
#define MEM_CNTL 0x0140
#define MEM_POWER_MISC 0x015c
#define AGP_BASE 0x0170
diff --git a/include/video/mach64.h b/include/video/mach64.h
index a8332e5..89e91c0 100644
--- a/include/video/mach64.h
+++ b/include/video/mach64.h
@@ -103,7 +103,7 @@
#define CUR_HORZ_VERT_OFF 0x0070 /* Dword offset 0_1C */
#define CUR2_HORZ_VERT_OFF 0x0070 /* Dword offset 0_1C */
-#define CONFIG_PANEL_LG 0x0074 /* Dword offset 0_1D (LG) */
+#define CNFG_PANEL_LG 0x0074 /* Dword offset 0_1D (LG) */
/* General I/O Control */
#define GP_IO 0x0078 /* Dword offset 0_1E */
@@ -146,8 +146,8 @@
#define CLOCK_SEL_CNTL 0x0090 /* Dword offset 0_24 */
/* Configuration */
-#define CONFIG_STAT1 0x0094 /* Dword offset 0_25 */
-#define CONFIG_STAT2 0x0098 /* Dword offset 0_26 */
+#define CNFG_STAT1 0x0094 /* Dword offset 0_25 */
+#define CNFG_STAT2 0x0098 /* Dword offset 0_26 */
/* Bus Control */
#define BUS_CNTL 0x00A0 /* Dword offset 0_28 */
@@ -190,9 +190,9 @@
#define POWER_MANAGEMENT_LG 0x00D8 /* Dword offset 0_36 (LG) */
/* Configuration */
-#define CONFIG_CNTL 0x00DC /* Dword offset 0_37 (CT, ET, VT) */
-#define CONFIG_CHIP_ID 0x00E0 /* Dword offset 0_38 */
-#define CONFIG_STAT0 0x00E4 /* Dword offset 0_39 */
+#define CNFG_CNTL 0x00DC /* Dword offset 0_37 (CT, ET, VT) */
+#define CNFG_CHIP_ID 0x00E0 /* Dword offset 0_38 */
+#define CNFG_STAT0 0x00E4 /* Dword offset 0_39 */
/* Test and Debug */
#define CRC_SIG 0x00E8 /* Dword offset 0_3A */
@@ -851,17 +851,17 @@
#define PLL_YCLK_CNTL 0x29
#define PM_DYN_CLK_CNTL 0x2A
-/* CONFIG_CNTL register constants */
+/* CNFG_CNTL register constants */
#define APERTURE_4M_ENABLE 1
#define APERTURE_8M_ENABLE 2
#define VGA_APERTURE_ENABLE 4
-/* CONFIG_STAT0 register constants (GX, CX) */
+/* CNFG_STAT0 register constants (GX, CX) */
#define CFG_BUS_TYPE 0x00000007
#define CFG_MEM_TYPE 0x00000038
#define CFG_INIT_DAC_TYPE 0x00000e00
-/* CONFIG_STAT0 register constants (CT, ET, VT) */
+/* CNFG_STAT0 register constants (CT, ET, VT) */
#define CFG_MEM_TYPE_xT 0x00000007
#define ISA 0
@@ -942,7 +942,7 @@
#define PCI_ATI_VENDOR_ID 0x1002
-/* CONFIG_CHIP_ID register constants */
+/* CNFG_CHIP_ID register constants */
#define CFG_CHIP_TYPE 0x0000FFFF
#define CFG_CHIP_CLASS 0x00FF0000
#define CFG_CHIP_REV 0xFF000000
@@ -951,7 +951,7 @@
#define CFG_CHIP_MINOR 0xC0000000
-/* Chip IDs read from CONFIG_CHIP_ID */
+/* Chip IDs read from CNFG_CHIP_ID */
/* mach64GX family */
#define GX_CHIP_ID 0xD7 /* mach64GX (ATI888GX00) */
@@ -1254,7 +1254,7 @@
#define CRTC2_DISPLAY_DIS 0x00000400
/* LCD register indices */
-#define CONFIG_PANEL 0x00
+#define CNFG_PANEL 0x00
#define LCD_GEN_CNTL 0x01
#define DSTN_CONTROL 0x02
#define HFB_PITCH_ADDR 0x03
diff --git a/include/video/radeon.h b/include/video/radeon.h
index 1cd09cc..e072b16 100644
--- a/include/video/radeon.h
+++ b/include/video/radeon.h
@@ -11,13 +11,13 @@
#define HI_STAT 0x004C
#define BUS_CNTL1 0x0034
#define I2C_CNTL_1 0x0094
-#define CONFIG_CNTL 0x00E0
-#define CONFIG_MEMSIZE 0x00F8
-#define CONFIG_APER_0_BASE 0x0100
-#define CONFIG_APER_1_BASE 0x0104
-#define CONFIG_APER_SIZE 0x0108
-#define CONFIG_REG_1_BASE 0x010C
-#define CONFIG_REG_APER_SIZE 0x0110
+#define CNFG_CNTL 0x00E0
+#define CNFG_MEMSIZE 0x00F8
+#define CNFG_APER_0_BASE 0x0100
+#define CNFG_APER_1_BASE 0x0104
+#define CNFG_APER_SIZE 0x0108
+#define CNFG_REG_1_BASE 0x010C
+#define CNFG_REG_APER_SIZE 0x0110
#define PAD_AGPINPUT_DELAY 0x0164
#define PAD_CTLR_STRENGTH 0x0168
#define PAD_CTLR_UPDATE 0x016C
@@ -509,7 +509,7 @@
/* CLOCK_CNTL_INDEX bit constants */
#define PLL_WR_EN 0x00000080
-/* CONFIG_CNTL bit constants */
+/* CNFG_CNTL bit constants */
#define CFG_VGA_RAM_EN 0x00000100
#define CFG_ATI_REV_ID_MASK (0xf << 16)
#define CFG_ATI_REV_A11 (0 << 16)
@@ -980,7 +980,7 @@
/* masks */
-#define CONFIG_MEMSIZE_MASK 0x1f000000
+#define CNFG_MEMSIZE_MASK 0x1f000000
#define MEM_CFG_TYPE 0x40000000
#define DST_OFFSET_MASK 0x003fffff
#define DST_PITCH_MASK 0x3fc00000
diff --git a/ipc/shm.c b/ipc/shm.c
index c0a021f..f8f69fa 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -565,11 +565,15 @@
struct hstate *h = hstate_file(shp->shm_file);
*rss += pages_per_huge_page(h) * mapping->nrpages;
} else {
+#ifdef CONFIG_SHMEM
struct shmem_inode_info *info = SHMEM_I(inode);
spin_lock(&info->lock);
*rss += inode->i_mapping->nrpages;
*swp += info->swapped;
spin_unlock(&info->lock);
+#else
+ *rss += inode->i_mapping->nrpages;
+#endif
}
total++;
diff --git a/kernel/async.c b/kernel/async.c
index 608b32b..67a2be7 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -138,15 +138,18 @@
/* 3) run it (and print duration)*/
if (initcall_debug && system_state == SYSTEM_BOOTING) {
- printk("calling %lli_%pF @ %i\n", entry->cookie, entry->func, task_pid_nr(current));
+ printk("calling %lli_%pF @ %i\n", (long long)entry->cookie,
+ entry->func, task_pid_nr(current));
calltime = ktime_get();
}
entry->func(entry->data, entry->cookie);
if (initcall_debug && system_state == SYSTEM_BOOTING) {
rettime = ktime_get();
delta = ktime_sub(rettime, calltime);
- printk("initcall %lli_%pF returned 0 after %lld usecs\n", entry->cookie,
- entry->func, ktime_to_ns(delta) >> 10);
+ printk("initcall %lli_%pF returned 0 after %lld usecs\n",
+ (long long)entry->cookie,
+ entry->func,
+ (long long)ktime_to_ns(delta) >> 10);
}
/* 4) remove it from the running queue */
@@ -247,7 +250,8 @@
delta = ktime_sub(endtime, starttime);
printk("async_continuing @ %i after %lli usec\n",
- task_pid_nr(current), ktime_to_ns(delta) >> 10);
+ task_pid_nr(current),
+ (long long)ktime_to_ns(delta) >> 10);
}
}
EXPORT_SYMBOL_GPL(async_synchronize_cookie_special);
diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c
index ecf765c..acd8835 100644
--- a/kernel/irq/numa_migrate.c
+++ b/kernel/irq/numa_migrate.c
@@ -71,7 +71,7 @@
desc = irq_desc_ptrs[irq];
if (desc && old_desc != desc)
- goto out_unlock;
+ goto out_unlock;
node = cpu_to_node(cpu);
desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
@@ -84,10 +84,15 @@
init_copy_one_irq_desc(irq, old_desc, desc, cpu);
irq_desc_ptrs[irq] = desc;
+ spin_unlock_irqrestore(&sparse_irq_lock, flags);
/* free the old one */
free_one_irq_desc(old_desc, desc);
+ spin_unlock(&old_desc->lock);
kfree(old_desc);
+ spin_lock(&desc->lock);
+
+ return desc;
out_unlock:
spin_unlock_irqrestore(&sparse_irq_lock, flags);
diff --git a/kernel/sched.c b/kernel/sched.c
index 242d0d4..8ee437a 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4697,8 +4697,8 @@
* started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
* zero in this (rare) case, and we handle it by continuing to scan the queue.
*/
-static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
- int nr_exclusive, int sync, void *key)
+void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+ int nr_exclusive, int sync, void *key)
{
wait_queue_t *curr, *next;
diff --git a/kernel/sys.c b/kernel/sys.c
index e7dc0e1..f145c41 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1525,22 +1525,14 @@
return -EINVAL;
if (copy_from_user(&new_rlim, rlim, sizeof(*rlim)))
return -EFAULT;
+ if (new_rlim.rlim_cur > new_rlim.rlim_max)
+ return -EINVAL;
old_rlim = current->signal->rlim + resource;
if ((new_rlim.rlim_max > old_rlim->rlim_max) &&
!capable(CAP_SYS_RESOURCE))
return -EPERM;
-
- if (resource == RLIMIT_NOFILE) {
- if (new_rlim.rlim_max == RLIM_INFINITY)
- new_rlim.rlim_max = sysctl_nr_open;
- if (new_rlim.rlim_cur == RLIM_INFINITY)
- new_rlim.rlim_cur = sysctl_nr_open;
- if (new_rlim.rlim_max > sysctl_nr_open)
- return -EPERM;
- }
-
- if (new_rlim.rlim_cur > new_rlim.rlim_max)
- return -EINVAL;
+ if (resource == RLIMIT_NOFILE && new_rlim.rlim_max > sysctl_nr_open)
+ return -EPERM;
retval = security_task_setrlimit(resource, &new_rlim);
if (retval)
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7dcf6e9..9a236ff 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1737,9 +1737,12 @@
{
struct task_struct *p;
+ rcu_read_lock();
do_each_pid_task(pid, PIDTYPE_PID, p) {
clear_tsk_trace_trace(p);
} while_each_pid_task(pid, PIDTYPE_PID, p);
+ rcu_read_unlock();
+
put_pid(pid);
}
@@ -1747,9 +1750,11 @@
{
struct task_struct *p;
+ rcu_read_lock();
do_each_pid_task(pid, PIDTYPE_PID, p) {
set_tsk_trace_trace(p);
} while_each_pid_task(pid, PIDTYPE_PID, p);
+ rcu_read_unlock();
}
static void clear_ftrace_pid_task(struct pid **pid)
diff --git a/kernel/wait.c b/kernel/wait.c
index cd87131..42a2dbc 100644
--- a/kernel/wait.c
+++ b/kernel/wait.c
@@ -91,6 +91,15 @@
}
EXPORT_SYMBOL(prepare_to_wait_exclusive);
+/*
+ * finish_wait - clean up after waiting in a queue
+ * @q: waitqueue waited on
+ * @wait: wait descriptor
+ *
+ * Sets current thread back to running state and removes
+ * the wait descriptor from the given waitqueue if still
+ * queued.
+ */
void finish_wait(wait_queue_head_t *q, wait_queue_t *wait)
{
unsigned long flags;
@@ -117,6 +126,39 @@
}
EXPORT_SYMBOL(finish_wait);
+/*
+ * abort_exclusive_wait - abort exclusive waiting in a queue
+ * @q: waitqueue waited on
+ * @wait: wait descriptor
+ * @state: runstate of the waiter to be woken
+ * @key: key to identify a wait bit queue or %NULL
+ *
+ * Sets current thread back to running state and removes
+ * the wait descriptor from the given waitqueue if still
+ * queued.
+ *
+ * Wakes up the next waiter if the caller is concurrently
+ * woken up through the queue.
+ *
+ * This prevents waiter starvation where an exclusive waiter
+ * aborts and is woken up concurrently and noone wakes up
+ * the next waiter.
+ */
+void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait,
+ unsigned int mode, void *key)
+{
+ unsigned long flags;
+
+ __set_current_state(TASK_RUNNING);
+ spin_lock_irqsave(&q->lock, flags);
+ if (!list_empty(&wait->task_list))
+ list_del_init(&wait->task_list);
+ else if (waitqueue_active(q))
+ __wake_up_common(q, mode, 1, 0, key);
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+EXPORT_SYMBOL(abort_exclusive_wait);
+
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key)
{
int ret = default_wake_function(wait, mode, sync, key);
@@ -177,17 +219,20 @@
__wait_on_bit_lock(wait_queue_head_t *wq, struct wait_bit_queue *q,
int (*action)(void *), unsigned mode)
{
- int ret = 0;
-
do {
+ int ret;
+
prepare_to_wait_exclusive(wq, &q->wait, mode);
- if (test_bit(q->key.bit_nr, q->key.flags)) {
- if ((ret = (*action)(q->key.flags)))
- break;
- }
+ if (!test_bit(q->key.bit_nr, q->key.flags))
+ continue;
+ ret = action(q->key.flags);
+ if (!ret)
+ continue;
+ abort_exclusive_wait(wq, &q->wait, mode, &q->key);
+ return ret;
} while (test_and_set_bit(q->key.bit_nr, q->key.flags));
finish_wait(wq, &q->wait);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(__wait_on_bit_lock);
diff --git a/mm/memory.c b/mm/memory.c
index 22bfa7a..baa999e 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1999,7 +1999,7 @@
* Don't let another task, with possibly unlocked vma,
* keep the mlocked page.
*/
- if (vma->vm_flags & VM_LOCKED) {
+ if ((vma->vm_flags & VM_LOCKED) && old_page) {
lock_page(old_page); /* for LRU manipulation */
clear_page_mlock(old_page);
unlock_page(old_page);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b493db7..dc32dae 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1051,13 +1051,22 @@
}
}
- if (wbc->sync_mode == WB_SYNC_NONE) {
- wbc->nr_to_write--;
- if (wbc->nr_to_write <= 0) {
- done = 1;
- break;
- }
+ if (nr_to_write > 0)
+ nr_to_write--;
+ else if (wbc->sync_mode == WB_SYNC_NONE) {
+ /*
+ * We stop writing back only if we are not
+ * doing integrity sync. In case of integrity
+ * sync we have to keep going because someone
+ * may be concurrently dirtying pages, and we
+ * might have synced a lot of newly appeared
+ * dirty pages, but have not synced all of the
+ * old dirty pages.
+ */
+ done = 1;
+ break;
}
+
if (wbc->nonblocking && bdi_write_congested(bdi)) {
wbc->encountered_congestion = 1;
done = 1;
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index e178366..0a1798e 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1767,7 +1767,7 @@
AFMT_S8 | AFMT_U16_LE |
AFMT_U16_BE |
AFMT_S32_LE | AFMT_S32_BE |
- AFMT_S24_LE | AFMT_S24_LE |
+ AFMT_S24_LE | AFMT_S24_BE |
AFMT_S24_PACKED;
params = kmalloc(sizeof(*params), GFP_KERNEL);
if (!params)
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 7ca66d6..144b852 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -399,7 +399,8 @@
{
int c, curr = -1;
- if (conn_len > 1 && wid_type != AC_WID_AUD_MIX)
+ if (conn_len > 1 && wid_type != AC_WID_AUD_MIX &&
+ wid_type != AC_WID_VOL_KNB)
curr = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_CONNECT_SEL, 0);
snd_iprintf(buffer, " Connection: %d\n", conn_len);
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7884a4e..0040101 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7012,6 +7012,7 @@
break;
case 0x106b1000: /* iMac 24 */
case 0x106b2800: /* AppleTV */
+ case 0x106b3e00: /* iMac 24 Aluminium */
board_config = ALC885_IMAC24;
break;
case 0x106b00a1: /* Macbook (might be wrong - PCI SSID?) */
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index b787b3c..38428e2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1804,6 +1804,8 @@
"HP dv4", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
"HP dv7", STAC_HP_M4),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3600,
+ "HP dv5", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
"HP dv5", STAC_HP_DV5),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 19d3391..e900cdc 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -617,7 +617,7 @@
int time = 100;
if (chip->buggy_semaphore)
return 0; /* just ignore ... */
- while (time-- && (igetdword(chip, ICHREG(ALI_CAS)) & ALI_CAS_SEM_BUSY))
+ while (--time && (igetdword(chip, ICHREG(ALI_CAS)) & ALI_CAS_SEM_BUSY))
udelay(1);
if (! time && ! chip->in_ac97_init)
snd_printk(KERN_WARNING "ali_codec_semaphore timeout\n");
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
index c5d6790..ff0054b 100644
--- a/sound/soc/atmel/atmel_ssc_dai.c
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -10,7 +10,7 @@
* Based on at91-ssc.c by
* Frank Mandarino <fmandarino@endrelia.com>
* Based on pxa2xx Platform drivers by
- * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ * Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h
index a828746..391135f 100644
--- a/sound/soc/atmel/atmel_ssc_dai.h
+++ b/sound/soc/atmel/atmel_ssc_dai.h
@@ -10,7 +10,7 @@
* Based on at91-ssc.c by
* Frank Mandarino <fmandarino@endrelia.com>
* Based on pxa2xx Platform drivers by
- * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ * Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index e3989d4..35d9975 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
*
- * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 5b5afc1..1cbb7b9 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -2,8 +2,7 @@
* wm8990.c -- WM8990 ALSA Soc Audio driver
*
* Copyright 2008 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- * lg@opensource.wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index b0362df..dd3bb29 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -175,9 +175,10 @@
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct omap_runtime_data *prtd = runtime->private_data;
+ unsigned long flags;
int ret = 0;
- spin_lock_irq(&prtd->lock);
+ spin_lock_irqsave(&prtd->lock, flags);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
@@ -195,7 +196,7 @@
default:
ret = -EINVAL;
}
- spin_unlock_irq(&prtd->lock);
+ spin_unlock_irqrestore(&prtd->lock, flags);
return ret;
}