| #ifndef __ASM_ALPHA_ELF_H |
| #define __ASM_ALPHA_ELF_H |
| |
| #include <asm/auxvec.h> |
| |
| /* Special values for the st_other field in the symbol table. */ |
| |
| #define STO_ALPHA_NOPV 0x80 |
| #define STO_ALPHA_STD_GPLOAD 0x88 |
| |
| /* |
| * Alpha ELF relocation types |
| */ |
| #define R_ALPHA_NONE 0 /* No reloc */ |
| #define R_ALPHA_REFLONG 1 /* Direct 32 bit */ |
| #define R_ALPHA_REFQUAD 2 /* Direct 64 bit */ |
| #define R_ALPHA_GPREL32 3 /* GP relative 32 bit */ |
| #define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */ |
| #define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */ |
| #define R_ALPHA_GPDISP 6 /* Add displacement to GP */ |
| #define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */ |
| #define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */ |
| #define R_ALPHA_SREL16 9 /* PC relative 16 bit */ |
| #define R_ALPHA_SREL32 10 /* PC relative 32 bit */ |
| #define R_ALPHA_SREL64 11 /* PC relative 64 bit */ |
| #define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */ |
| #define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */ |
| #define R_ALPHA_GPREL16 19 /* GP relative 16 bit */ |
| #define R_ALPHA_COPY 24 /* Copy symbol at runtime */ |
| #define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */ |
| #define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */ |
| #define R_ALPHA_RELATIVE 27 /* Adjust by program base */ |
| #define R_ALPHA_BRSGP 28 |
| #define R_ALPHA_TLSGD 29 |
| #define R_ALPHA_TLS_LDM 30 |
| #define R_ALPHA_DTPMOD64 31 |
| #define R_ALPHA_GOTDTPREL 32 |
| #define R_ALPHA_DTPREL64 33 |
| #define R_ALPHA_DTPRELHI 34 |
| #define R_ALPHA_DTPRELLO 35 |
| #define R_ALPHA_DTPREL16 36 |
| #define R_ALPHA_GOTTPREL 37 |
| #define R_ALPHA_TPREL64 38 |
| #define R_ALPHA_TPRELHI 39 |
| #define R_ALPHA_TPRELLO 40 |
| #define R_ALPHA_TPREL16 41 |
| |
| #define SHF_ALPHA_GPREL 0x10000000 |
| |
| /* Legal values for e_flags field of Elf64_Ehdr. */ |
| |
| #define EF_ALPHA_32BIT 1 /* All addresses are below 2GB */ |
| |
| /* |
| * ELF register definitions.. |
| */ |
| |
| /* |
| * The OSF/1 version of <sys/procfs.h> makes gregset_t 46 entries long. |
| * I have no idea why that is so. For now, we just leave it at 33 |
| * (32 general regs + processor status word). |
| */ |
| #define ELF_NGREG 33 |
| #define ELF_NFPREG 32 |
| |
| typedef unsigned long elf_greg_t; |
| typedef elf_greg_t elf_gregset_t[ELF_NGREG]; |
| |
| typedef double elf_fpreg_t; |
| typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; |
| |
| /* |
| * This is used to ensure we don't load something for the wrong architecture. |
| */ |
| #define elf_check_arch(x) ((x)->e_machine == EM_ALPHA) |
| |
| /* |
| * These are used to set parameters in the core dumps. |
| */ |
| #define ELF_CLASS ELFCLASS64 |
| #define ELF_DATA ELFDATA2LSB |
| #define ELF_ARCH EM_ALPHA |
| |
| #define USE_ELF_CORE_DUMP |
| #define ELF_EXEC_PAGESIZE 8192 |
| |
| /* This is the location that an ET_DYN program is loaded if exec'ed. Typical |
| use of this is to invoke "./ld.so someprog" to test out a new version of |
| the loader. We need to make sure that it is out of the way of the program |
| that it will "exec", and that there is sufficient room for the brk. */ |
| |
| #define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x1000000) |
| |
| /* $0 is set by ld.so to a pointer to a function which might be |
| registered using atexit. This provides a mean for the dynamic |
| linker to call DT_FINI functions for shared libraries that have |
| been loaded before the code runs. |
| |
| So that we can use the same startup file with static executables, |
| we start programs with a value of 0 to indicate that there is no |
| such function. */ |
| |
| #define ELF_PLAT_INIT(_r, load_addr) _r->r0 = 0 |
| |
| /* The registers are layed out in pt_regs for PAL and syscall |
| convenience. Re-order them for the linear elf_gregset_t. */ |
| |
| struct pt_regs; |
| struct thread_info; |
| struct task_struct; |
| extern void dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, |
| struct thread_info *ti); |
| #define ELF_CORE_COPY_REGS(DEST, REGS) \ |
| dump_elf_thread(DEST, REGS, current_thread_info()); |
| |
| /* Similar, but for a thread other than current. */ |
| |
| extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task); |
| #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \ |
| dump_elf_task(*(DEST), TASK) |
| |
| /* Similar, but for the FP registers. */ |
| |
| extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task); |
| #define ELF_CORE_COPY_FPREGS(TASK, DEST) \ |
| dump_elf_task_fp(*(DEST), TASK) |
| |
| /* This yields a mask that user programs can use to figure out what |
| instruction set this CPU supports. This is trivial on Alpha, |
| but not so on other machines. */ |
| |
| #define ELF_HWCAP (~amask(-1)) |
| |
| /* This yields a string that ld.so will use to load implementation |
| specific libraries for optimization. This is more specific in |
| intent than poking at uname or /proc/cpuinfo. */ |
| |
| #define ELF_PLATFORM \ |
| ({ \ |
| enum implver_enum i_ = implver(); \ |
| ( i_ == IMPLVER_EV4 ? "ev4" \ |
| : i_ == IMPLVER_EV5 \ |
| ? (amask(AMASK_BWX) ? "ev5" : "ev56") \ |
| : amask (AMASK_CIX) ? "ev6" : "ev67"); \ |
| }) |
| |
| #ifdef __KERNEL__ |
| |
| #define SET_PERSONALITY(EX, IBCS2) \ |
| set_personality(((EX).e_flags & EF_ALPHA_32BIT) \ |
| ? PER_LINUX_32BIT : (IBCS2) ? PER_SVR4 : PER_LINUX) |
| |
| extern int alpha_l1i_cacheshape; |
| extern int alpha_l1d_cacheshape; |
| extern int alpha_l2_cacheshape; |
| extern int alpha_l3_cacheshape; |
| |
| /* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ |
| #define ARCH_DLINFO \ |
| do { \ |
| NEW_AUX_ENT(AT_L1I_CACHESHAPE, alpha_l1i_cacheshape); \ |
| NEW_AUX_ENT(AT_L1D_CACHESHAPE, alpha_l1d_cacheshape); \ |
| NEW_AUX_ENT(AT_L2_CACHESHAPE, alpha_l2_cacheshape); \ |
| NEW_AUX_ENT(AT_L3_CACHESHAPE, alpha_l3_cacheshape); \ |
| } while (0) |
| |
| #endif /* __KERNEL__ */ |
| #endif /* __ASM_ALPHA_ELF_H */ |