| |
| /* |
| * sound/oss/pas2_mixer.c |
| * |
| * Mixer routines for the Pro Audio Spectrum cards. |
| */ |
| |
| /* |
| * Copyright (C) by Hannu Savolainen 1993-1997 |
| * |
| * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) |
| * Version 2 (June 1991). See the "COPYING" file distributed with this software |
| * for more info. |
| */ |
| /* |
| * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) |
| * Bartlomiej Zolnierkiewicz : added __init to pas_init_mixer() |
| */ |
| #include <linux/init.h> |
| #include "sound_config.h" |
| |
| #include "pas2.h" |
| |
| #ifndef DEB |
| #define DEB(what) /* (what) */ |
| #endif |
| |
| extern int pas_translate_code; |
| extern char pas_model; |
| extern int *pas_osp; |
| extern int pas_audiodev; |
| |
| static int rec_devices = (SOUND_MASK_MIC); /* Default recording source */ |
| static int mode_control; |
| |
| #define POSSIBLE_RECORDING_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \ |
| SOUND_MASK_CD | SOUND_MASK_ALTPCM) |
| |
| #define SUPPORTED_MIXER_DEVICES (SOUND_MASK_SYNTH | SOUND_MASK_PCM | SOUND_MASK_SPEAKER | SOUND_MASK_LINE | SOUND_MASK_MIC | \ |
| SOUND_MASK_CD | SOUND_MASK_ALTPCM | SOUND_MASK_IMIX | \ |
| SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_RECLEV) |
| |
| static int *levels; |
| |
| static int default_levels[32] = |
| { |
| 0x3232, /* Master Volume */ |
| 0x3232, /* Bass */ |
| 0x3232, /* Treble */ |
| 0x5050, /* FM */ |
| 0x4b4b, /* PCM */ |
| 0x3232, /* PC Speaker */ |
| 0x4b4b, /* Ext Line */ |
| 0x4b4b, /* Mic */ |
| 0x4b4b, /* CD */ |
| 0x6464, /* Recording monitor */ |
| 0x4b4b, /* SB PCM */ |
| 0x6464 /* Recording level */ |
| }; |
| |
| void |
| mix_write(unsigned char data, int ioaddr) |
| { |
| /* |
| * The Revision D cards have a problem with their MVA508 interface. The |
| * kludge-o-rama fix is to make a 16-bit quantity with identical LSB and |
| * MSBs out of the output byte and to do a 16-bit out to the mixer port - |
| * 1. We need to do this because it isn't timing problem but chip access |
| * sequence problem. |
| */ |
| |
| if (pas_model == 4) |
| { |
| outw(data | (data << 8), (ioaddr + pas_translate_code) - 1); |
| outb((0x80), 0); |
| } else |
| pas_write(data, ioaddr); |
| } |
| |
| static int |
| mixer_output(int right_vol, int left_vol, int div, int bits, |
| int mixer) /* Input or output mixer */ |
| { |
| int left = left_vol * div / 100; |
| int right = right_vol * div / 100; |
| |
| |
| if (bits & 0x10) |
| { |
| left |= mixer; |
| right |= mixer; |
| } |
| if (bits == 0x03 || bits == 0x04) |
| { |
| mix_write(0x80 | bits, 0x078B); |
| mix_write(left, 0x078B); |
| right_vol = left_vol; |
| } else |
| { |
| mix_write(0x80 | 0x20 | bits, 0x078B); |
| mix_write(left, 0x078B); |
| mix_write(0x80 | 0x40 | bits, 0x078B); |
| mix_write(right, 0x078B); |
| } |
| |
| return (left_vol | (right_vol << 8)); |
| } |
| |
| static void |
| set_mode(int new_mode) |
| { |
| mix_write(0x80 | 0x05, 0x078B); |
| mix_write(new_mode, 0x078B); |
| |
| mode_control = new_mode; |
| } |
| |
| static int |
| pas_mixer_set(int whichDev, unsigned int level) |
| { |
| int left, right, devmask, changed, i, mixer = 0; |
| |
| DEB(printk("static int pas_mixer_set(int whichDev = %d, unsigned int level = %X)\n", whichDev, level)); |
| |
| left = level & 0x7f; |
| right = (level & 0x7f00) >> 8; |
| |
| if (whichDev < SOUND_MIXER_NRDEVICES) { |
| if ((1 << whichDev) & rec_devices) |
| mixer = 0x20; |
| else |
| mixer = 0x00; |
| } |
| |
| switch (whichDev) |
| { |
| case SOUND_MIXER_VOLUME: /* Master volume (0-63) */ |
| levels[whichDev] = mixer_output(right, left, 63, 0x01, 0); |
| break; |
| |
| /* |
| * Note! Bass and Treble are mono devices. Will use just the left |
| * channel. |
| */ |
| case SOUND_MIXER_BASS: /* Bass (0-12) */ |
| levels[whichDev] = mixer_output(right, left, 12, 0x03, 0); |
| break; |
| case SOUND_MIXER_TREBLE: /* Treble (0-12) */ |
| levels[whichDev] = mixer_output(right, left, 12, 0x04, 0); |
| break; |
| |
| case SOUND_MIXER_SYNTH: /* Internal synthesizer (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x00, mixer); |
| break; |
| case SOUND_MIXER_PCM: /* PAS PCM (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x05, mixer); |
| break; |
| case SOUND_MIXER_ALTPCM: /* SB PCM (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x07, mixer); |
| break; |
| case SOUND_MIXER_SPEAKER: /* PC speaker (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x06, mixer); |
| break; |
| case SOUND_MIXER_LINE: /* External line (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x02, mixer); |
| break; |
| case SOUND_MIXER_CD: /* CD (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x03, mixer); |
| break; |
| case SOUND_MIXER_MIC: /* External microphone (0-31) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x04, mixer); |
| break; |
| case SOUND_MIXER_IMIX: /* Recording monitor (0-31) (Output mixer only) */ |
| levels[whichDev] = mixer_output(right, left, 31, 0x10 | 0x01, |
| 0x00); |
| break; |
| case SOUND_MIXER_RECLEV: /* Recording level (0-15) */ |
| levels[whichDev] = mixer_output(right, left, 15, 0x02, 0); |
| break; |
| |
| |
| case SOUND_MIXER_RECSRC: |
| devmask = level & POSSIBLE_RECORDING_DEVICES; |
| |
| changed = devmask ^ rec_devices; |
| rec_devices = devmask; |
| |
| for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) |
| if (changed & (1 << i)) |
| { |
| pas_mixer_set(i, levels[i]); |
| } |
| return rec_devices; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return (levels[whichDev]); |
| } |
| |
| /*****/ |
| |
| static void |
| pas_mixer_reset(void) |
| { |
| int foo; |
| |
| DEB(printk("pas2_mixer.c: void pas_mixer_reset(void)\n")); |
| |
| for (foo = 0; foo < SOUND_MIXER_NRDEVICES; foo++) |
| pas_mixer_set(foo, levels[foo]); |
| |
| set_mode(0x04 | 0x01); |
| } |
| |
| static int pas_mixer_ioctl(int dev, unsigned int cmd, void __user *arg) |
| { |
| int level,v ; |
| int __user *p = (int __user *)arg; |
| |
| DEB(printk("pas2_mixer.c: int pas_mixer_ioctl(unsigned int cmd = %X, unsigned int arg = %X)\n", cmd, arg)); |
| if (cmd == SOUND_MIXER_PRIVATE1) { /* Set loudness bit */ |
| if (get_user(level, p)) |
| return -EFAULT; |
| if (level == -1) /* Return current settings */ |
| level = (mode_control & 0x04); |
| else { |
| mode_control &= ~0x04; |
| if (level) |
| mode_control |= 0x04; |
| set_mode(mode_control); |
| } |
| level = !!level; |
| return put_user(level, p); |
| } |
| if (cmd == SOUND_MIXER_PRIVATE2) { /* Set enhance bit */ |
| if (get_user(level, p)) |
| return -EFAULT; |
| if (level == -1) { /* Return current settings */ |
| if (!(mode_control & 0x03)) |
| level = 0; |
| else |
| level = ((mode_control & 0x03) + 1) * 20; |
| } else { |
| int i = 0; |
| |
| level &= 0x7f; |
| if (level) |
| i = (level / 20) - 1; |
| mode_control &= ~0x03; |
| mode_control |= i & 0x03; |
| set_mode(mode_control); |
| if (i) |
| i = (i + 1) * 20; |
| level = i; |
| } |
| return put_user(level, p); |
| } |
| if (cmd == SOUND_MIXER_PRIVATE3) { /* Set mute bit */ |
| if (get_user(level, p)) |
| return -EFAULT; |
| if (level == -1) /* Return current settings */ |
| level = !(pas_read(0x0B8A) & 0x20); |
| else { |
| if (level) |
| pas_write(pas_read(0x0B8A) & (~0x20), 0x0B8A); |
| else |
| pas_write(pas_read(0x0B8A) | 0x20, 0x0B8A); |
| |
| level = !(pas_read(0x0B8A) & 0x20); |
| } |
| return put_user(level, p); |
| } |
| if (((cmd >> 8) & 0xff) == 'M') { |
| if (get_user(v, p)) |
| return -EFAULT; |
| if (_SIOC_DIR(cmd) & _SIOC_WRITE) { |
| v = pas_mixer_set(cmd & 0xff, v); |
| } else { |
| switch (cmd & 0xff) { |
| case SOUND_MIXER_RECSRC: |
| v = rec_devices; |
| break; |
| |
| case SOUND_MIXER_STEREODEVS: |
| v = SUPPORTED_MIXER_DEVICES & ~(SOUND_MASK_BASS | SOUND_MASK_TREBLE); |
| break; |
| |
| case SOUND_MIXER_DEVMASK: |
| v = SUPPORTED_MIXER_DEVICES; |
| break; |
| |
| case SOUND_MIXER_RECMASK: |
| v = POSSIBLE_RECORDING_DEVICES & SUPPORTED_MIXER_DEVICES; |
| break; |
| |
| case SOUND_MIXER_CAPS: |
| v = 0; /* No special capabilities */ |
| break; |
| |
| default: |
| v = levels[cmd & 0xff]; |
| break; |
| } |
| } |
| return put_user(v, p); |
| } |
| return -EINVAL; |
| } |
| |
| static struct mixer_operations pas_mixer_operations = |
| { |
| .owner = THIS_MODULE, |
| .id = "PAS16", |
| .name = "Pro Audio Spectrum 16", |
| .ioctl = pas_mixer_ioctl |
| }; |
| |
| int __init |
| pas_init_mixer(void) |
| { |
| int d; |
| |
| levels = load_mixer_volumes("PAS16_1", default_levels, 1); |
| |
| pas_mixer_reset(); |
| |
| if ((d = sound_alloc_mixerdev()) != -1) |
| { |
| audio_devs[pas_audiodev]->mixer_dev = d; |
| mixer_devs[d] = &pas_mixer_operations; |
| } |
| return 1; |
| } |