| /* -*- linux-c -*- * |
| * |
| * ALSA driver for the digigram lx6464es interface |
| * adapted upstream headers |
| * |
| * Copyright (c) 2009 Tim Blechmann <tim@klingt.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; see the file COPYING. If not, write to |
| * the Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 02111-1307, USA. |
| * |
| */ |
| |
| #ifndef LX_DEFS_H |
| #define LX_DEFS_H |
| |
| /* code adapted from ethersound.h */ |
| #define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ |
| #define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / |
| * [ 44k - ( 44.1k + 48k ) / 2 ] |
| * * 8 */ |
| #define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] |
| * * 8 */ |
| #define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / |
| * [ 48k + ( 44.1k + 48k ) / 2 ] |
| * * 8 */ |
| |
| /* code adapted from LXES_registers.h */ |
| |
| #define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the |
| * ConfES register. */ |
| #define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the |
| * ConfES register. */ |
| #define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the |
| * ConfES register. */ |
| #define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: |
| * sample rate = frequency rate. */ |
| |
| #define CONFES_READ_PART_MASK 0x00070000 |
| #define CONFES_WRITE_PART_MASK 0x00F80000 |
| |
| /* code adapted from if_drv_mb.h */ |
| |
| #define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if |
| * not yet pending */ |
| #define MASK_SYS_STATUS_URUN (1L << 30) |
| #define MASK_SYS_STATUS_ORUN (1L << 29) |
| #define MASK_SYS_STATUS_EOBO (1L << 28) |
| #define MASK_SYS_STATUS_EOBI (1L << 27) |
| #define MASK_SYS_STATUS_FREQ (1L << 26) |
| #define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the |
| * XES */ |
| #define MASK_SYS_STATUS_TIMER (1L << 24) |
| |
| #define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ |
| MASK_SYS_STATUS_URUN | \ |
| MASK_SYS_STATUS_ORUN | \ |
| MASK_SYS_STATUS_EOBO | \ |
| MASK_SYS_STATUS_EOBI | \ |
| MASK_SYS_STATUS_FREQ | \ |
| MASK_SYS_STATUS_ESA) |
| |
| #define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ |
| MASK_SYS_STATUS_TIMER) |
| |
| #define MASK_SYS_TIMER_COUNT 0x0000FFFF |
| |
| #define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains |
| * internal: reserved fo end |
| * of plx dma */ |
| #define MASK_SYS_STATUS_XES (1L << 21) /* event that remains |
| * internal: pending XES |
| * IRQ */ |
| #define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command |
| * management: notify driver |
| * instead of polling */ |
| |
| |
| #define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ |
| |
| #define MICROBLAZE_IBL_MIN 32 |
| #define MICROBLAZE_IBL_DEFAULT 128 |
| #define MICROBLAZE_IBL_MAX 512 |
| /* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ |
| |
| |
| |
| /* command opcodes, see reference for details */ |
| |
| /* |
| the capture bit position in the object_id field in driver commands |
| depends upon the number of managed channels. For now, 64 IN + 64 OUT are |
| supported. HOwever, the communication protocol forsees 1024 channels, hence |
| bit 10 indicates a capture (input) object). |
| */ |
| #define ID_IS_CAPTURE (1L << 10) |
| #define ID_OFFSET 13 /* object ID is at the 13th bit in the |
| * 1st command word.*/ |
| #define ID_CH_MASK 0x3F |
| #define OPCODE_OFFSET 24 /* offset of the command opcode in the first |
| * command word.*/ |
| |
| enum cmd_mb_opcodes { |
| CMD_00_INFO_DEBUG = 0x00, |
| CMD_01_GET_SYS_CFG = 0x01, |
| CMD_02_SET_GRANULARITY = 0x02, |
| CMD_03_SET_TIMER_IRQ = 0x03, |
| CMD_04_GET_EVENT = 0x04, |
| CMD_05_GET_PIPES = 0x05, |
| |
| CMD_06_ALLOCATE_PIPE = 0x06, |
| CMD_07_RELEASE_PIPE = 0x07, |
| CMD_08_ASK_BUFFERS = 0x08, |
| CMD_09_STOP_PIPE = 0x09, |
| CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, |
| CMD_0B_TOGGLE_PIPE_STATE = 0x0b, |
| |
| CMD_0C_DEF_STREAM = 0x0c, |
| CMD_0D_SET_MUTE = 0x0d, |
| CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, |
| CMD_0F_UPDATE_BUFFER = 0x0f, |
| CMD_10_GET_BUFFER = 0x10, |
| CMD_11_CANCEL_BUFFER = 0x11, |
| CMD_12_GET_PEAK = 0x12, |
| CMD_13_SET_STREAM_STATE = 0x13, |
| CMD_14_INVALID = 0x14, |
| }; |
| |
| /* pipe states */ |
| enum pipe_state_t { |
| PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ |
| * (free or stopped, or paused). */ |
| PSTATE_RUN = 1, /* sustained play/record state. */ |
| PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do |
| * not DMA, record pipe do a last DMA. */ |
| PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do |
| * not yet increase their sample count, record |
| * pipes do not DMA. */ |
| PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet |
| * receive an "alloc" command. */ |
| }; |
| |
| /* stream states */ |
| enum stream_state_t { |
| SSTATE_STOP = 0x00, /* setting to stop resets the stream spl |
| * count.*/ |
| SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ |
| SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ |
| }; |
| |
| /* buffer flags */ |
| enum buffer_flags { |
| BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ |
| BF_CURRENT = 0x40, /* set if this is the current buffer (there is |
| * always a current buffer).*/ |
| BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event |
| * when finished.*/ |
| BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] |
| * by the end of this buffer.*/ |
| BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ |
| BF_xx = 0x04, /* future extension.*/ |
| BF_EOB = 0x02, /* set if finished, but not yet free.*/ |
| BF_PAUSE = 0x01, /* pause stream at buffer end.*/ |
| BF_ZERO = 0x00, /* no flags (init).*/ |
| }; |
| |
| /** |
| * Stream Flags definitions |
| */ |
| enum stream_flags { |
| SF_ZERO = 0x00000000, /* no flags (stream invalid). */ |
| SF_VALID = 0x10000000, /* the stream has a valid DMA_conf |
| * info (setstreamformat). */ |
| SF_XRUN = 0x20000000, /* the stream is un x-run state. */ |
| SF_START = 0x40000000, /* the DMA is running.*/ |
| SF_ASIO = 0x80000000, /* ASIO.*/ |
| }; |
| |
| |
| #define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ |
| #define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ |
| |
| |
| #define MASK_STREAM_HAS_MAPPING (1L << 12) |
| #define MASK_STREAM_IS_ASIO (1L << 9) |
| #define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th |
| * bit in the command word. */ |
| |
| #define STREAM_FMT_16b 0x02 |
| #define STREAM_FMT_intel 0x01 |
| |
| #define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response |
| * word */ |
| |
| #define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the |
| * response word. */ |
| #define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of |
| * datasize in the buffer_t structure. */ |
| |
| #define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, |
| * may be 0xFF for "current". */ |
| |
| |
| /* code adapted from PcxErr_e.h */ |
| |
| /* Bits masks */ |
| |
| #define ERROR_MASK 0x8000 |
| |
| #define SOURCE_MASK 0x7800 |
| |
| #define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ |
| #define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ |
| #define E_SOURCE_API 0x1000 /* 2 >> 1 */ |
| /* Error tools */ |
| #define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ |
| /* Error pcxaudio */ |
| #define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ |
| /* Error virtual pcx */ |
| #define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ |
| /* Error dispatcher */ |
| #define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ |
| /* Error from CobraNet firmware */ |
| #define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ |
| |
| #define E_SOURCE_USER 0x7800 |
| |
| #define CLASS_MASK 0x0700 |
| |
| #define CODE_MASK 0x00FF |
| |
| /* Bits values */ |
| |
| /* Values for the error/warning bit */ |
| #define ERROR_VALUE 0x8000 |
| #define WARNING_VALUE 0x0000 |
| |
| /* Class values */ |
| #define E_CLASS_GENERAL 0x0000 |
| #define E_CLASS_INVALID_CMD 0x0100 |
| #define E_CLASS_INVALID_STD_OBJECT 0x0200 |
| #define E_CLASS_RSRC_IMPOSSIBLE 0x0300 |
| #define E_CLASS_WRONG_CONTEXT 0x0400 |
| #define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 |
| #define E_CLASS_REAL_TIME_ERROR 0x0600 |
| #define E_CLASS_DIRECTSHOW 0x0700 |
| #define E_CLASS_FREE 0x0700 |
| |
| |
| /* Complete DRV error code for the general class */ |
| #define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) |
| #define ED_CONCURRENCY (ED_GN | 0x01) |
| #define ED_DSP_CRASHED (ED_GN | 0x02) |
| #define ED_UNKNOWN_BOARD (ED_GN | 0x03) |
| #define ED_NOT_INSTALLED (ED_GN | 0x04) |
| #define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) |
| #define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) |
| #define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) |
| #define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) |
| #define ED_CANCELLED (ED_GN | 0x09) |
| #define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) |
| #define ED_INVALID_ADDRESS (ED_GN | 0x11) |
| #define ED_DSP_CORRUPTED (ED_GN | 0x12) |
| #define ED_PENDING_OPERATION (ED_GN | 0x13) |
| #define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) |
| #define ED_NET_REGISTER_ERROR (ED_GN | 0x15) |
| #define ED_NET_THREAD_ERROR (ED_GN | 0x16) |
| #define ED_NET_OPEN_ERROR (ED_GN | 0x17) |
| #define ED_NET_CLOSE_ERROR (ED_GN | 0x18) |
| #define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) |
| #define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) |
| #define ED_NET_SEND_ERROR (ED_GN | 0x1B) |
| #define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) |
| #define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) |
| #define ED_NET_WAIT_ERROR (ED_GN | 0x1E) |
| #define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) |
| #define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) |
| #define ED_INVALID_RS232_INIT (ED_GN | 0x21) |
| #define ED_FILE_ERROR (ED_GN | 0x22) |
| #define ED_INVALID_GPIO_CMD (ED_GN | 0x23) |
| #define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) |
| #define ED_RS232_NOT_OPENED (ED_GN | 0x25) |
| #define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) |
| #define ED_GPIO_NOT_OPENED (ED_GN | 0x27) |
| #define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ |
| #define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ |
| |
| #define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage |
| * pour RCX |
| * (old 0x28) |
| * */ |
| #define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ |
| #define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ |
| #define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ |
| #define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ |
| #define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ |
| #define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ |
| #define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ |
| |
| #define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour |
| * PCX (old 0x14) */ |
| #define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ |
| #define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ |
| #define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ |
| #define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ |
| |
| #define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) |
| |
| #define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) |
| |
| /* Complete DRV error code for real time class */ |
| #define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) |
| #define ED_DSP_TIMED_OUT (ED_RT | 0x01) |
| #define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) |
| #define ED_STREAM_OVERRUN (ED_RT | 0x03) |
| #define ED_DSP_BUSY (ED_RT | 0x04) |
| #define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) |
| #define ED_BOARD_TIME_OUT (ED_RT | 0x06) |
| #define ED_XILINX_ERROR (ED_RT | 0x07) |
| #define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) |
| |
| /* Complete BOARD error code for the invaid standard object class */ |
| #define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ |
| E_CLASS_INVALID_STD_OBJECT) |
| #define EB_INVALID_EFFECT (EB_ISO | 0x00) |
| #define EB_INVALID_PIPE (EB_ISO | 0x40) |
| #define EB_INVALID_STREAM (EB_ISO | 0x80) |
| #define EB_INVALID_AUDIO (EB_ISO | 0xC0) |
| |
| /* Complete BOARD error code for impossible resource allocation class */ |
| #define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) |
| #define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) |
| #define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) |
| |
| #define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ |
| EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE |
| #define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ |
| EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE |
| |
| #define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) |
| #define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) |
| #define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) |
| #define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) |
| #define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) |
| #define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) |
| #define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) |
| #define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) |
| #define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) |
| #define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) |
| #define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) |
| #define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) |
| #define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) |
| |
| /* Complete BOARD error code for wrong call context class */ |
| #define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) |
| #define EB_CMD_REFUSED (EB_WCC | 0x00) |
| #define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) |
| #define EB_SPC_REFUSED (EB_WCC | 0xFD) |
| #define EB_CSN_REFUSED (EB_WCC | 0xFE) |
| #define EB_CSE_REFUSED (EB_WCC | 0xFF) |
| |
| |
| |
| |
| #endif /* LX_DEFS_H */ |