| /* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include "sxr1130-svr-pinctrl-overlay.dtsi" |
| #include "sdm670-pmic-overlay.dtsi" |
| #include "sdm670-sde-display.dtsi" |
| #include "sdm670-camera-sensor-svr.dtsi" |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| |
| &qupv3_se10_i2c { |
| #include "smb1355.dtsi" |
| }; |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qmp-v3"; |
| |
| vdda-phy-supply = <&pm660l_l1>; /* 0.88v */ |
| vdda-pll-supply = <&pm660_l1>; /* 1.2v */ |
| vdda-phy-max-microamp = <62900>; |
| vdda-pll-max-microamp = <18300>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| vdd-hba-supply = <&ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm660l_l4>; |
| vcc-voltage-level = <2960000 2960000>; |
| vccq2-supply = <&pm660_l8>; |
| vcc-max-microamp = <600000>; |
| vccq2-max-microamp = <600000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm660_l1>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| status = "ok"; |
| }; |
| |
| &pm660l_switch1 { |
| pinctrl-names = "led_enable", "led_disable"; |
| pinctrl-0 = <&flash_led3_front_en>; |
| pinctrl-1 = <&flash_led3_front_dis>; |
| }; |
| |
| &qupv3_se9_2uart { |
| status = "disabled"; |
| }; |
| |
| &qupv3_se12_2uart { |
| status = "ok"; |
| }; |
| |
| &qupv3_se8_spi { |
| status = "disabled"; |
| }; |
| |
| &qupv3_se3_i2c { |
| status = "disabled"; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 44 0x00>; |
| qcom,nq-ven = <&tlmm 12 0x00>; |
| qcom,nq-firm = <&tlmm 43 0x00>; |
| qcom,nq-clkreq = <&pm660_gpios 4 0x00>; |
| qcom,nq-esepwr = <&tlmm 116 0x00>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <44 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active |
| &nfc_enable_active |
| &nfc_clk_default>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>; |
| }; |
| }; |
| |
| &qupv3_se9_i2c { |
| status = "ok"; |
| tusb1064@10 { |
| compatible = "ti,tusb1064"; |
| reg = <0x10>; |
| ti,tiusb-dp-3v3-en = <&tlmm 142 0x00>; |
| }; |
| |
| vxr7200@39 { |
| compatible = "synaptics,vxr7200"; |
| reg = <0x39>; |
| qcom,vxr_3v3_en = <&tlmm 138 0x00>; |
| qcom,led-5v-en-gpio = <&tlmm 134 0x00>; |
| qcom,led-driver-en1-gpio = <&tlmm 110 0x00>; |
| qcom,led-driver-en2-gpio = <&tlmm 111 0x00>; |
| qcom,1p8-en-gpio = <&tlmm 2 0x00>; |
| qcom,switch-power-gpio = <&tlmm 112 0x00>; |
| qcom,selab-gpio = <&tlmm 105 0>;/* Low for DP */ |
| qcom,oenab-gpio = <&tlmm 106 0>; /*Low for DP */ |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| }; |
| |
| |
| &qupv3_se10_i2c { |
| status = "ok"; |
| }; |
| |
| &qupv3_se6_4uart { |
| status = "ok"; |
| }; |
| |
| &sdhc_1 { |
| vdd-supply = <&pm660l_l4>; |
| qcom,vdd-voltage-level = <2960000 2960000>; |
| qcom,vdd-current-level = <0 570000>; |
| |
| vdd-io-supply = <&pm660_l8>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <0 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&pm660l_l5>; |
| qcom,vdd-voltage-level = <2960000 2960000>; |
| qcom,vdd-current-level = <0 800000>; |
| |
| vdd-io-supply = <&pm660l_l2>; |
| qcom,vdd-io-voltage-level = <1800000 2960000>; |
| qcom,vdd-io-current-level = <0 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; |
| |
| cd-gpios = <&tlmm 96 0x1>; |
| |
| status = "ok"; |
| }; |
| |
| &vendor { |
| svr_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| #include "fg-gen3-batterydata-goertek-1400mah.dtsi" |
| }; |
| }; |
| |
| &pm660_fg { |
| qcom,battery-data = <&svr_batterydata>; |
| }; |
| |
| &pm660_charger { |
| qcom,battery-data = <&svr_batterydata>; |
| }; |
| |
| &tlmm { |
| smb_int_default: smb_int_default { |
| mux { |
| pins = "gpio54"; |
| function = "gpio"; |
| }; |
| config { |
| pins = "gpio54"; |
| drive-strength = <2>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| }; |
| |
| &smb1355_0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&smb_int_default |
| &smb_shutdown_default>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <54 IRQ_TYPE_LEVEL_LOW>; |
| smb1355_charger_0: qcom,smb1355-charger@1000 { |
| io-channels = <&pm660_rradc 2>, |
| <&pm660_rradc 12>; |
| io-channel-names = "charger_temp", |
| "charger_temp_max"; |
| status ="ok"; |
| }; |
| }; |
| |
| &smb1355_1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&smb_int_default |
| &smb_shutdown_default>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <54 IRQ_TYPE_LEVEL_LOW>; |
| smb1355_charger_1: qcom,smb1355-charger@1000 { |
| io-channels = <&pm660_rradc 2>, |
| <&pm660_rradc 12>; |
| io-channel-names = "charger_temp", |
| "charger_temp_max"; |
| status ="ok"; |
| }; |
| }; |
| |
| &soc { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| label = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&key_home_default |
| &key_cam_focus_default |
| &key_vol_up_default>; |
| |
| home { |
| label = "home"; /* BACK Key*/ |
| gpios = <&pm660l_gpios 5 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <158>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| linux,can-disable; |
| }; |
| |
| cam_focus { |
| label = "cam_focus"; |
| gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; |
| linux,input-type = <1>; |
| linux,code = <528>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| linux,can-disable; |
| }; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| linux,can-disable; |
| }; |
| }; |
| |
| qcom,xr-smrtvwr-misc { |
| compatible = "qcom,xr-smrtvwr-misc"; |
| }; |
| |
| rpmh-regulator-ldoa14 { |
| pm660_l14: regulator-pm660-l14 { |
| qcom,init-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| quat_mi2s_gpios: quat_mi2s_pinctrl { |
| status = "ok"; |
| compatible = "qcom,msm-cdc-pinctrl"; |
| pinctrl-names = "aud_active", "aud_sleep"; |
| pinctrl-0 = <&quat_mi2s_sck_active |
| &quat_mi2s_ws_active |
| &quat_mi2s_d0_active>; |
| pinctrl-1 = <&quat_mi2s_sck_sleep |
| &quat_mi2s_ws_sleep |
| &quat_mi2s_d0_sleep>; |
| qcom,lpi-gpios; |
| }; |
| |
| }; |
| |
| |
| |
| &dsi_dual_xrsmrtvwr_jdi_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 79 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,led-5v-en-gpio = <&tlmm 134 0>; |
| qcom,selab-gpio = <&tlmm 105 0>;/* High for DSI */ |
| qcom,oenab-gpio = <&tlmm 106 0>; /*Low for DSI */ |
| qcom,1p8-en-gpio = <&tlmm 2 0>; |
| qcom,led-driver-en1-gpio = <&tlmm 110 0>; |
| qcom,led-driver-en2-gpio = <&tlmm 111 0>; |
| qcom,switch-power-gpio = <&tlmm 112 0>; |
| }; |
| |
| |
| &dsi_dual_nt35597_truly_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_dual_nt35597_truly_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| }; |
| |
| &dsi_nt35597_truly_dsc_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_nt35597_truly_dsc_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| }; |
| |
| &dsi_sim_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 90 0>; |
| }; |
| |
| &dsi_dual_sim_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_sim_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_dual_sim_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_sim_dsc_375_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_dual_sim_dsc_375_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_dual_nt35597_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_dual_nt35597_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| }; |
| |
| &dsi_rm67195_amoled_fhd_cmd { |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| }; |
| |
| &dsi_nt35695b_truly_fhd_video { |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| }; |
| |
| &dsi_nt35695b_truly_fhd_cmd { |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| }; |
| |
| &dsi_hx8399_truly_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,platform-reset-gpio = <&tlmm 75 0>; |
| qcom,platform-te-gpio = <&tlmm 10 0>; |
| qcom,panel-mode-gpio = <&tlmm 76 0>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| }; |
| |
| &pm660l_wled { |
| status = "okay"; |
| qcom,led-strings-list = [01 02]; |
| }; |
| |
| &mdss_mdp { |
| #cooling-cells = <2>; |
| }; |
| |
| &thermal_zones { |
| xo-therm-step { |
| status = "disabled"; |
| }; |
| }; |
| |
| &tavil_snd { |
| qcom,msm-mi2s-master = <1>, <1>, <1>, <0>, <1>; |
| qcom,audio-routing = |
| "AIF4 VI", "MCLK", |
| "RX_BIAS", "MCLK", |
| "MADINPUT", "MCLK", |
| "hifi amp", "LINEOUT1", |
| "hifi amp", "LINEOUT2", |
| "AMIC2", "MIC BIAS2", |
| "MIC BIAS2", "Headset Mic", |
| "AMIC3", "MIC BIAS2", |
| "MIC BIAS2", "ANCRight Headset Mic", |
| "AMIC4", "MIC BIAS2", |
| "MIC BIAS2", "ANCLeft Headset Mic", |
| "AMIC5", "MIC BIAS3", |
| "MIC BIAS3", "Handset Mic", |
| "DMIC0", "MIC BIAS1", |
| "MIC BIAS1", "Digital Mic0", |
| "DMIC1", "MIC BIAS1", |
| "MIC BIAS1", "Digital Mic1", |
| "DMIC2", "MIC BIAS4", |
| "MIC BIAS4", "Digital Mic2", |
| "DMIC3", "MIC BIAS4", |
| "MIC BIAS4", "Digital Mic3", |
| "DMIC4", "MIC BIAS3", |
| "MIC BIAS3", "Digital Mic4", |
| "DMIC5", "MIC BIAS3", |
| "MIC BIAS3", "Digital Mic5", |
| "SpkrLeft IN", "SPK1 OUT", |
| "SpkrRight IN", "SPK2 OUT"; |
| |
| qcom,quat-mi2s-gpios = <&quat_mi2s_gpios>; |
| qcom,msm-mbhc-hphl-swh = <1>; |
| qcom,msm-mbhc-gnd-swh = <1>; |
| qcom,hph-en0-gpio = <&tavil_hph_en0>; |
| qcom,hph-en1-gpio = <&tavil_hph_en1>; |
| qcom,msm-mclk-freq = <9600000>; |
| asoc-codec = <&stub_codec>, <&ext_disp_audio_codec>; |
| asoc-codec-names = "msm-stub-codec.1", "msm-ext-disp-audio-codec-rx"; |
| qcom,wsa-max-devs = <2>; |
| qcom,wsa-devs = <&wsa881x_0211>, <&wsa881x_0212>, |
| <&wsa881x_0213>, <&wsa881x_0214>; |
| qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight", |
| "SpkrLeft", "SpkrRight"; |
| }; |
| |
| &wcd_rst_gpio { |
| status = "ok"; |
| pinctrl-0 = <&cdc_xr_reset_active>; |
| pinctrl-1 = <&cdc_xr_reset_sleep>; |
| }; |
| |
| &dsi_dual_xrsmrtvwr_jdi_video_display { |
| qcom,dsi-display-active; |
| }; |
| |
| &pm660_charger { |
| qcom,ufp-only-mode; |
| }; |
| |
| &dai_mi2s3 { |
| qcom,msm-mi2s-rx-lines = <0>; |
| qcom,msm-mi2s-tx-lines = <1>; |
| |
| }; |
| |
| &cdc_pdm_gpios { |
| status = "disabled"; |
| }; |