| /* |
| * S6E63M0 AMOLED LCD panel driver. |
| * |
| * Author: InKi Dae <inki.dae@samsung.com> |
| * |
| * Derived from drivers/video/omap/lcd-apollon.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/wait.h> |
| #include <linux/fb.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/spi/spi.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/lcd.h> |
| #include <linux/backlight.h> |
| |
| #include "s6e63m0_gamma.h" |
| |
| #define SLEEPMSEC 0x1000 |
| #define ENDDEF 0x2000 |
| #define DEFMASK 0xFF00 |
| #define COMMAND_ONLY 0xFE |
| #define DATA_ONLY 0xFF |
| |
| #define MIN_BRIGHTNESS 0 |
| #define MAX_BRIGHTNESS 10 |
| |
| #define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) |
| |
| struct s6e63m0 { |
| struct device *dev; |
| struct spi_device *spi; |
| unsigned int power; |
| unsigned int current_brightness; |
| unsigned int gamma_mode; |
| unsigned int gamma_table_count; |
| struct lcd_device *ld; |
| struct backlight_device *bd; |
| struct lcd_platform_data *lcd_pd; |
| }; |
| |
| static const unsigned short SEQ_PANEL_CONDITION_SET[] = { |
| 0xF8, 0x01, |
| DATA_ONLY, 0x27, |
| DATA_ONLY, 0x27, |
| DATA_ONLY, 0x07, |
| DATA_ONLY, 0x07, |
| DATA_ONLY, 0x54, |
| DATA_ONLY, 0x9f, |
| DATA_ONLY, 0x63, |
| DATA_ONLY, 0x86, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x33, |
| DATA_ONLY, 0x0d, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_DISPLAY_CONDITION_SET[] = { |
| 0xf2, 0x02, |
| DATA_ONLY, 0x03, |
| DATA_ONLY, 0x1c, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x10, |
| |
| 0xf7, 0x03, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_GAMMA_SETTING[] = { |
| 0xfa, 0x00, |
| DATA_ONLY, 0x18, |
| DATA_ONLY, 0x08, |
| DATA_ONLY, 0x24, |
| DATA_ONLY, 0x64, |
| DATA_ONLY, 0x56, |
| DATA_ONLY, 0x33, |
| DATA_ONLY, 0xb6, |
| DATA_ONLY, 0xba, |
| DATA_ONLY, 0xa8, |
| DATA_ONLY, 0xac, |
| DATA_ONLY, 0xb1, |
| DATA_ONLY, 0x9d, |
| DATA_ONLY, 0xc1, |
| DATA_ONLY, 0xc1, |
| DATA_ONLY, 0xb7, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x9c, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x9f, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0xd6, |
| |
| 0xfa, 0x01, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_ETC_CONDITION_SET[] = { |
| 0xf6, 0x00, |
| DATA_ONLY, 0x8c, |
| DATA_ONLY, 0x07, |
| |
| 0xb3, 0xc, |
| |
| 0xb5, 0x2c, |
| DATA_ONLY, 0x12, |
| DATA_ONLY, 0x0c, |
| DATA_ONLY, 0x0a, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x0e, |
| DATA_ONLY, 0x17, |
| DATA_ONLY, 0x13, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x2a, |
| DATA_ONLY, 0x24, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1b, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x17, |
| |
| DATA_ONLY, 0x2b, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x3a, |
| DATA_ONLY, 0x34, |
| DATA_ONLY, 0x30, |
| DATA_ONLY, 0x2c, |
| DATA_ONLY, 0x29, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x25, |
| DATA_ONLY, 0x23, |
| DATA_ONLY, 0x21, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x1e, |
| DATA_ONLY, 0x1e, |
| |
| 0xb6, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x11, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x33, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| |
| 0xb7, 0x2c, |
| DATA_ONLY, 0x12, |
| DATA_ONLY, 0x0c, |
| DATA_ONLY, 0x0a, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x0e, |
| DATA_ONLY, 0x17, |
| DATA_ONLY, 0x13, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x2a, |
| DATA_ONLY, 0x24, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1b, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x17, |
| |
| DATA_ONLY, 0x2b, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x3a, |
| DATA_ONLY, 0x34, |
| DATA_ONLY, 0x30, |
| DATA_ONLY, 0x2c, |
| DATA_ONLY, 0x29, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x25, |
| DATA_ONLY, 0x23, |
| DATA_ONLY, 0x21, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x1e, |
| DATA_ONLY, 0x1e, |
| |
| 0xb8, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x11, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x33, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| |
| 0xb9, 0x2c, |
| DATA_ONLY, 0x12, |
| DATA_ONLY, 0x0c, |
| DATA_ONLY, 0x0a, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x0e, |
| DATA_ONLY, 0x17, |
| DATA_ONLY, 0x13, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x2a, |
| DATA_ONLY, 0x24, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x1b, |
| DATA_ONLY, 0x1a, |
| DATA_ONLY, 0x17, |
| |
| DATA_ONLY, 0x2b, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x3a, |
| DATA_ONLY, 0x34, |
| DATA_ONLY, 0x30, |
| DATA_ONLY, 0x2c, |
| DATA_ONLY, 0x29, |
| DATA_ONLY, 0x26, |
| DATA_ONLY, 0x25, |
| DATA_ONLY, 0x23, |
| DATA_ONLY, 0x21, |
| DATA_ONLY, 0x20, |
| DATA_ONLY, 0x1e, |
| DATA_ONLY, 0x1e, |
| |
| 0xba, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x11, |
| DATA_ONLY, 0x22, |
| DATA_ONLY, 0x33, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| DATA_ONLY, 0x44, |
| |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x55, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| DATA_ONLY, 0x66, |
| |
| 0xc1, 0x4d, |
| DATA_ONLY, 0x96, |
| DATA_ONLY, 0x1d, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x01, |
| DATA_ONLY, 0xdf, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| DATA_ONLY, 0x1f, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x00, |
| DATA_ONLY, 0x03, |
| DATA_ONLY, 0x06, |
| DATA_ONLY, 0x09, |
| DATA_ONLY, 0x0d, |
| DATA_ONLY, 0x0f, |
| DATA_ONLY, 0x12, |
| DATA_ONLY, 0x15, |
| DATA_ONLY, 0x18, |
| |
| 0xb2, 0x10, |
| DATA_ONLY, 0x10, |
| DATA_ONLY, 0x0b, |
| DATA_ONLY, 0x05, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_ACL_ON[] = { |
| /* ACL on */ |
| 0xc0, 0x01, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_ACL_OFF[] = { |
| /* ACL off */ |
| 0xc0, 0x00, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_ELVSS_ON[] = { |
| /* ELVSS on */ |
| 0xb1, 0x0b, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_ELVSS_OFF[] = { |
| /* ELVSS off */ |
| 0xb1, 0x0a, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_STAND_BY_OFF[] = { |
| 0x11, COMMAND_ONLY, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_STAND_BY_ON[] = { |
| 0x10, COMMAND_ONLY, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| static const unsigned short SEQ_DISPLAY_ON[] = { |
| 0x29, COMMAND_ONLY, |
| |
| ENDDEF, 0x0000 |
| }; |
| |
| |
| static int s6e63m0_spi_write_byte(struct s6e63m0 *lcd, int addr, int data) |
| { |
| u16 buf[1]; |
| struct spi_message msg; |
| |
| struct spi_transfer xfer = { |
| .len = 2, |
| .tx_buf = buf, |
| }; |
| |
| buf[0] = (addr << 8) | data; |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| return spi_sync(lcd->spi, &msg); |
| } |
| |
| static int s6e63m0_spi_write(struct s6e63m0 *lcd, unsigned char address, |
| unsigned char command) |
| { |
| int ret = 0; |
| |
| if (address != DATA_ONLY) |
| ret = s6e63m0_spi_write_byte(lcd, 0x0, address); |
| if (command != COMMAND_ONLY) |
| ret = s6e63m0_spi_write_byte(lcd, 0x1, command); |
| |
| return ret; |
| } |
| |
| static int s6e63m0_panel_send_sequence(struct s6e63m0 *lcd, |
| const unsigned short *wbuf) |
| { |
| int ret = 0, i = 0; |
| |
| while ((wbuf[i] & DEFMASK) != ENDDEF) { |
| if ((wbuf[i] & DEFMASK) != SLEEPMSEC) { |
| ret = s6e63m0_spi_write(lcd, wbuf[i], wbuf[i+1]); |
| if (ret) |
| break; |
| } else |
| udelay(wbuf[i+1]*1000); |
| i += 2; |
| } |
| |
| return ret; |
| } |
| |
| static int _s6e63m0_gamma_ctl(struct s6e63m0 *lcd, const unsigned int *gamma) |
| { |
| unsigned int i = 0; |
| int ret = 0; |
| |
| /* disable gamma table updating. */ |
| ret = s6e63m0_spi_write(lcd, 0xfa, 0x00); |
| if (ret) { |
| dev_err(lcd->dev, "failed to disable gamma table updating.\n"); |
| goto gamma_err; |
| } |
| |
| for (i = 0 ; i < GAMMA_TABLE_COUNT; i++) { |
| ret = s6e63m0_spi_write(lcd, DATA_ONLY, gamma[i]); |
| if (ret) { |
| dev_err(lcd->dev, "failed to set gamma table.\n"); |
| goto gamma_err; |
| } |
| } |
| |
| /* update gamma table. */ |
| ret = s6e63m0_spi_write(lcd, 0xfa, 0x01); |
| if (ret) |
| dev_err(lcd->dev, "failed to update gamma table.\n"); |
| |
| gamma_err: |
| return ret; |
| } |
| |
| static int s6e63m0_gamma_ctl(struct s6e63m0 *lcd, int gamma) |
| { |
| int ret = 0; |
| |
| ret = _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]); |
| |
| return ret; |
| } |
| |
| |
| static int s6e63m0_ldi_init(struct s6e63m0 *lcd) |
| { |
| int ret, i; |
| const unsigned short *init_seq[] = { |
| SEQ_PANEL_CONDITION_SET, |
| SEQ_DISPLAY_CONDITION_SET, |
| SEQ_GAMMA_SETTING, |
| SEQ_ETC_CONDITION_SET, |
| SEQ_ACL_ON, |
| SEQ_ELVSS_ON, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(init_seq); i++) { |
| ret = s6e63m0_panel_send_sequence(lcd, init_seq[i]); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int s6e63m0_ldi_enable(struct s6e63m0 *lcd) |
| { |
| int ret = 0, i; |
| const unsigned short *enable_seq[] = { |
| SEQ_STAND_BY_OFF, |
| SEQ_DISPLAY_ON, |
| }; |
| |
| for (i = 0; i < ARRAY_SIZE(enable_seq); i++) { |
| ret = s6e63m0_panel_send_sequence(lcd, enable_seq[i]); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int s6e63m0_ldi_disable(struct s6e63m0 *lcd) |
| { |
| int ret; |
| |
| ret = s6e63m0_panel_send_sequence(lcd, SEQ_STAND_BY_ON); |
| |
| return ret; |
| } |
| |
| static int s6e63m0_power_on(struct s6e63m0 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd = NULL; |
| struct backlight_device *bd = NULL; |
| |
| pd = lcd->lcd_pd; |
| if (!pd) { |
| dev_err(lcd->dev, "platform data is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| bd = lcd->bd; |
| if (!bd) { |
| dev_err(lcd->dev, "backlight device is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| if (!pd->power_on) { |
| dev_err(lcd->dev, "power_on is NULL.\n"); |
| return -EFAULT; |
| } else { |
| pd->power_on(lcd->ld, 1); |
| mdelay(pd->power_on_delay); |
| } |
| |
| if (!pd->reset) { |
| dev_err(lcd->dev, "reset is NULL.\n"); |
| return -EFAULT; |
| } else { |
| pd->reset(lcd->ld); |
| mdelay(pd->reset_delay); |
| } |
| |
| ret = s6e63m0_ldi_init(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to initialize ldi.\n"); |
| return ret; |
| } |
| |
| ret = s6e63m0_ldi_enable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "failed to enable ldi.\n"); |
| return ret; |
| } |
| |
| /* set brightness to current value after power on or resume. */ |
| ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness); |
| if (ret) { |
| dev_err(lcd->dev, "lcd gamma setting failed.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int s6e63m0_power_off(struct s6e63m0 *lcd) |
| { |
| int ret = 0; |
| struct lcd_platform_data *pd = NULL; |
| |
| pd = lcd->lcd_pd; |
| if (!pd) { |
| dev_err(lcd->dev, "platform data is NULL.\n"); |
| return -EFAULT; |
| } |
| |
| ret = s6e63m0_ldi_disable(lcd); |
| if (ret) { |
| dev_err(lcd->dev, "lcd setting failed.\n"); |
| return -EIO; |
| } |
| |
| mdelay(pd->power_off_delay); |
| |
| if (!pd->power_on) { |
| dev_err(lcd->dev, "power_on is NULL.\n"); |
| return -EFAULT; |
| } else |
| pd->power_on(lcd->ld, 0); |
| |
| return 0; |
| } |
| |
| static int s6e63m0_power(struct s6e63m0 *lcd, int power) |
| { |
| int ret = 0; |
| |
| if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) |
| ret = s6e63m0_power_on(lcd); |
| else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) |
| ret = s6e63m0_power_off(lcd); |
| |
| if (!ret) |
| lcd->power = power; |
| |
| return ret; |
| } |
| |
| static int s6e63m0_set_power(struct lcd_device *ld, int power) |
| { |
| struct s6e63m0 *lcd = lcd_get_data(ld); |
| |
| if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && |
| power != FB_BLANK_NORMAL) { |
| dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); |
| return -EINVAL; |
| } |
| |
| return s6e63m0_power(lcd, power); |
| } |
| |
| static int s6e63m0_get_power(struct lcd_device *ld) |
| { |
| struct s6e63m0 *lcd = lcd_get_data(ld); |
| |
| return lcd->power; |
| } |
| |
| static int s6e63m0_get_brightness(struct backlight_device *bd) |
| { |
| return bd->props.brightness; |
| } |
| |
| static int s6e63m0_set_brightness(struct backlight_device *bd) |
| { |
| int ret = 0, brightness = bd->props.brightness; |
| struct s6e63m0 *lcd = bl_get_data(bd); |
| |
| if (brightness < MIN_BRIGHTNESS || |
| brightness > bd->props.max_brightness) { |
| dev_err(&bd->dev, "lcd brightness should be %d to %d.\n", |
| MIN_BRIGHTNESS, MAX_BRIGHTNESS); |
| return -EINVAL; |
| } |
| |
| ret = s6e63m0_gamma_ctl(lcd, bd->props.brightness); |
| if (ret) { |
| dev_err(&bd->dev, "lcd brightness setting failed.\n"); |
| return -EIO; |
| } |
| |
| return ret; |
| } |
| |
| static struct lcd_ops s6e63m0_lcd_ops = { |
| .set_power = s6e63m0_set_power, |
| .get_power = s6e63m0_get_power, |
| }; |
| |
| static const struct backlight_ops s6e63m0_backlight_ops = { |
| .get_brightness = s6e63m0_get_brightness, |
| .update_status = s6e63m0_set_brightness, |
| }; |
| |
| static ssize_t s6e63m0_sysfs_show_gamma_mode(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); |
| char temp[10]; |
| |
| switch (lcd->gamma_mode) { |
| case 0: |
| sprintf(temp, "2.2 mode\n"); |
| strcat(buf, temp); |
| break; |
| case 1: |
| sprintf(temp, "1.9 mode\n"); |
| strcat(buf, temp); |
| break; |
| case 2: |
| sprintf(temp, "1.7 mode\n"); |
| strcat(buf, temp); |
| break; |
| default: |
| dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7)n"); |
| break; |
| } |
| |
| return strlen(buf); |
| } |
| |
| static ssize_t s6e63m0_sysfs_store_gamma_mode(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); |
| struct backlight_device *bd = NULL; |
| int brightness, rc; |
| |
| rc = strict_strtoul(buf, 0, (unsigned long *)&lcd->gamma_mode); |
| if (rc < 0) |
| return rc; |
| |
| bd = lcd->bd; |
| |
| brightness = bd->props.brightness; |
| |
| switch (lcd->gamma_mode) { |
| case 0: |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]); |
| break; |
| case 1: |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_19_table[brightness]); |
| break; |
| case 2: |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_17_table[brightness]); |
| break; |
| default: |
| dev_info(dev, "gamma mode could be 0:2.2, 1:1.9 or 2:1.7\n"); |
| _s6e63m0_gamma_ctl(lcd, gamma_table.gamma_22_table[brightness]); |
| break; |
| } |
| return len; |
| } |
| |
| static DEVICE_ATTR(gamma_mode, 0644, |
| s6e63m0_sysfs_show_gamma_mode, s6e63m0_sysfs_store_gamma_mode); |
| |
| static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct s6e63m0 *lcd = dev_get_drvdata(dev); |
| char temp[3]; |
| |
| sprintf(temp, "%d\n", lcd->gamma_table_count); |
| strcpy(buf, temp); |
| |
| return strlen(buf); |
| } |
| static DEVICE_ATTR(gamma_table, 0444, |
| s6e63m0_sysfs_show_gamma_table, NULL); |
| |
| static int __devinit s6e63m0_probe(struct spi_device *spi) |
| { |
| int ret = 0; |
| struct s6e63m0 *lcd = NULL; |
| struct lcd_device *ld = NULL; |
| struct backlight_device *bd = NULL; |
| struct backlight_properties props; |
| |
| lcd = kzalloc(sizeof(struct s6e63m0), GFP_KERNEL); |
| if (!lcd) |
| return -ENOMEM; |
| |
| /* s6e63m0 lcd panel uses 3-wire 9bits SPI Mode. */ |
| spi->bits_per_word = 9; |
| |
| ret = spi_setup(spi); |
| if (ret < 0) { |
| dev_err(&spi->dev, "spi setup failed.\n"); |
| goto out_free_lcd; |
| } |
| |
| lcd->spi = spi; |
| lcd->dev = &spi->dev; |
| |
| lcd->lcd_pd = (struct lcd_platform_data *)spi->dev.platform_data; |
| if (!lcd->lcd_pd) { |
| dev_err(&spi->dev, "platform data is NULL.\n"); |
| goto out_free_lcd; |
| } |
| |
| ld = lcd_device_register("s6e63m0", &spi->dev, lcd, &s6e63m0_lcd_ops); |
| if (IS_ERR(ld)) { |
| ret = PTR_ERR(ld); |
| goto out_free_lcd; |
| } |
| |
| lcd->ld = ld; |
| |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = MAX_BRIGHTNESS; |
| |
| bd = backlight_device_register("s6e63m0bl-bl", &spi->dev, lcd, |
| &s6e63m0_backlight_ops, &props); |
| if (IS_ERR(bd)) { |
| ret = PTR_ERR(bd); |
| goto out_lcd_unregister; |
| } |
| |
| bd->props.brightness = MAX_BRIGHTNESS; |
| lcd->bd = bd; |
| |
| /* |
| * it gets gamma table count available so it gets user |
| * know that. |
| */ |
| lcd->gamma_table_count = |
| sizeof(gamma_table) / (MAX_GAMMA_LEVEL * sizeof(int)); |
| |
| ret = device_create_file(&(spi->dev), &dev_attr_gamma_mode); |
| if (ret < 0) |
| dev_err(&(spi->dev), "failed to add sysfs entries\n"); |
| |
| ret = device_create_file(&(spi->dev), &dev_attr_gamma_table); |
| if (ret < 0) |
| dev_err(&(spi->dev), "failed to add sysfs entries\n"); |
| |
| /* |
| * if lcd panel was on from bootloader like u-boot then |
| * do not lcd on. |
| */ |
| if (!lcd->lcd_pd->lcd_enabled) { |
| /* |
| * if lcd panel was off from bootloader then |
| * current lcd status is powerdown and then |
| * it enables lcd panel. |
| */ |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| s6e63m0_power(lcd, FB_BLANK_UNBLANK); |
| } else |
| lcd->power = FB_BLANK_UNBLANK; |
| |
| dev_set_drvdata(&spi->dev, lcd); |
| |
| dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n"); |
| |
| return 0; |
| |
| out_lcd_unregister: |
| lcd_device_unregister(ld); |
| out_free_lcd: |
| kfree(lcd); |
| return ret; |
| } |
| |
| static int __devexit s6e63m0_remove(struct spi_device *spi) |
| { |
| struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev); |
| |
| s6e63m0_power(lcd, FB_BLANK_POWERDOWN); |
| device_remove_file(&spi->dev, &dev_attr_gamma_table); |
| device_remove_file(&spi->dev, &dev_attr_gamma_mode); |
| backlight_device_unregister(lcd->bd); |
| lcd_device_unregister(lcd->ld); |
| kfree(lcd); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_PM) |
| static unsigned int before_power; |
| |
| static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg) |
| { |
| int ret = 0; |
| struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev); |
| |
| dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power); |
| |
| before_power = lcd->power; |
| |
| /* |
| * when lcd panel is suspend, lcd panel becomes off |
| * regardless of status. |
| */ |
| ret = s6e63m0_power(lcd, FB_BLANK_POWERDOWN); |
| |
| return ret; |
| } |
| |
| static int s6e63m0_resume(struct spi_device *spi) |
| { |
| int ret = 0; |
| struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev); |
| |
| /* |
| * after suspended, if lcd panel status is FB_BLANK_UNBLANK |
| * (at that time, before_power is FB_BLANK_UNBLANK) then |
| * it changes that status to FB_BLANK_POWERDOWN to get lcd on. |
| */ |
| if (before_power == FB_BLANK_UNBLANK) |
| lcd->power = FB_BLANK_POWERDOWN; |
| |
| dev_dbg(&spi->dev, "before_power = %d\n", before_power); |
| |
| ret = s6e63m0_power(lcd, before_power); |
| |
| return ret; |
| } |
| #else |
| #define s6e63m0_suspend NULL |
| #define s6e63m0_resume NULL |
| #endif |
| |
| /* Power down all displays on reboot, poweroff or halt. */ |
| static void s6e63m0_shutdown(struct spi_device *spi) |
| { |
| struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev); |
| |
| s6e63m0_power(lcd, FB_BLANK_POWERDOWN); |
| } |
| |
| static struct spi_driver s6e63m0_driver = { |
| .driver = { |
| .name = "s6e63m0", |
| .bus = &spi_bus_type, |
| .owner = THIS_MODULE, |
| }, |
| .probe = s6e63m0_probe, |
| .remove = __devexit_p(s6e63m0_remove), |
| .shutdown = s6e63m0_shutdown, |
| .suspend = s6e63m0_suspend, |
| .resume = s6e63m0_resume, |
| }; |
| |
| static int __init s6e63m0_init(void) |
| { |
| return spi_register_driver(&s6e63m0_driver); |
| } |
| |
| static void __exit s6e63m0_exit(void) |
| { |
| spi_unregister_driver(&s6e63m0_driver); |
| } |
| |
| module_init(s6e63m0_init); |
| module_exit(s6e63m0_exit); |
| |
| MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>"); |
| MODULE_DESCRIPTION("S6E63M0 LCD Driver"); |
| MODULE_LICENSE("GPL"); |
| |