| /* |
| * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. |
| * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) |
| * |
| * Right now, I am very wasteful with the buffers. I allocate memory |
| * pages and then divide them into 2K frame buffers. This way I know I |
| * have buffers large enough to hold one frame within one buffer descriptor. |
| * Once I get this working, I will use 64 or 128 byte CPM buffers, which |
| * will be much more memory efficient and will easily handle lots of |
| * small packets. |
| * |
| * Much better multiple PHY support by Magnus Damm. |
| * Copyright (c) 2000 Ericsson Radio Systems AB. |
| * |
| * Support for FEC controller of ColdFire processors. |
| * Copyright (c) 2001-2005 Greg Ungerer (gerg@snapgear.com) |
| * |
| * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) |
| * Copyright (c) 2004-2006 Macq Electronique SA. |
| * |
| * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/ptrace.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <net/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/udp.h> |
| #include <linux/icmp.h> |
| #include <linux/spinlock.h> |
| #include <linux/workqueue.h> |
| #include <linux/bitops.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/clk.h> |
| #include <linux/platform_device.h> |
| #include <linux/phy.h> |
| #include <linux/fec.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/of_net.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/if_vlan.h> |
| |
| #include <asm/cacheflush.h> |
| |
| #include "fec.h" |
| |
| static void set_multicast_list(struct net_device *ndev); |
| |
| #if defined(CONFIG_ARM) |
| #define FEC_ALIGNMENT 0xf |
| #else |
| #define FEC_ALIGNMENT 0x3 |
| #endif |
| |
| #define DRIVER_NAME "fec" |
| #define FEC_NAPI_WEIGHT 64 |
| |
| /* Pause frame feild and FIFO threshold */ |
| #define FEC_ENET_FCE (1 << 5) |
| #define FEC_ENET_RSEM_V 0x84 |
| #define FEC_ENET_RSFL_V 16 |
| #define FEC_ENET_RAEM_V 0x8 |
| #define FEC_ENET_RAFL_V 0x8 |
| #define FEC_ENET_OPD_V 0xFFF0 |
| |
| /* Controller is ENET-MAC */ |
| #define FEC_QUIRK_ENET_MAC (1 << 0) |
| /* Controller needs driver to swap frame */ |
| #define FEC_QUIRK_SWAP_FRAME (1 << 1) |
| /* Controller uses gasket */ |
| #define FEC_QUIRK_USE_GASKET (1 << 2) |
| /* Controller has GBIT support */ |
| #define FEC_QUIRK_HAS_GBIT (1 << 3) |
| /* Controller has extend desc buffer */ |
| #define FEC_QUIRK_HAS_BUFDESC_EX (1 << 4) |
| /* Controller has hardware checksum support */ |
| #define FEC_QUIRK_HAS_CSUM (1 << 5) |
| /* Controller has hardware vlan support */ |
| #define FEC_QUIRK_HAS_VLAN (1 << 6) |
| |
| static struct platform_device_id fec_devtype[] = { |
| { |
| /* keep it for coldfire */ |
| .name = DRIVER_NAME, |
| .driver_data = 0, |
| }, { |
| .name = "imx25-fec", |
| .driver_data = FEC_QUIRK_USE_GASKET, |
| }, { |
| .name = "imx27-fec", |
| .driver_data = 0, |
| }, { |
| .name = "imx28-fec", |
| .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME, |
| }, { |
| .name = "imx6q-fec", |
| .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT | |
| FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM | |
| FEC_QUIRK_HAS_VLAN, |
| }, { |
| .name = "mvf600-fec", |
| .driver_data = FEC_QUIRK_ENET_MAC, |
| }, { |
| /* sentinel */ |
| } |
| }; |
| MODULE_DEVICE_TABLE(platform, fec_devtype); |
| |
| enum imx_fec_type { |
| IMX25_FEC = 1, /* runs on i.mx25/50/53 */ |
| IMX27_FEC, /* runs on i.mx27/35/51 */ |
| IMX28_FEC, |
| IMX6Q_FEC, |
| MVF600_FEC, |
| }; |
| |
| static const struct of_device_id fec_dt_ids[] = { |
| { .compatible = "fsl,imx25-fec", .data = &fec_devtype[IMX25_FEC], }, |
| { .compatible = "fsl,imx27-fec", .data = &fec_devtype[IMX27_FEC], }, |
| { .compatible = "fsl,imx28-fec", .data = &fec_devtype[IMX28_FEC], }, |
| { .compatible = "fsl,imx6q-fec", .data = &fec_devtype[IMX6Q_FEC], }, |
| { .compatible = "fsl,mvf600-fec", .data = &fec_devtype[MVF600_FEC], }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, fec_dt_ids); |
| |
| static unsigned char macaddr[ETH_ALEN]; |
| module_param_array(macaddr, byte, NULL, 0); |
| MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address"); |
| |
| #if defined(CONFIG_M5272) |
| /* |
| * Some hardware gets it MAC address out of local flash memory. |
| * if this is non-zero then assume it is the address to get MAC from. |
| */ |
| #if defined(CONFIG_NETtel) |
| #define FEC_FLASHMAC 0xf0006006 |
| #elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES) |
| #define FEC_FLASHMAC 0xf0006000 |
| #elif defined(CONFIG_CANCam) |
| #define FEC_FLASHMAC 0xf0020000 |
| #elif defined (CONFIG_M5272C3) |
| #define FEC_FLASHMAC (0xffe04000 + 4) |
| #elif defined(CONFIG_MOD5272) |
| #define FEC_FLASHMAC 0xffc0406b |
| #else |
| #define FEC_FLASHMAC 0 |
| #endif |
| #endif /* CONFIG_M5272 */ |
| |
| #if (((RX_RING_SIZE + TX_RING_SIZE) * 32) > PAGE_SIZE) |
| #error "FEC: descriptor ring size constants too large" |
| #endif |
| |
| /* Interrupt events/masks. */ |
| #define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ |
| #define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ |
| #define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ |
| #define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ |
| #define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ |
| #define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ |
| #define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ |
| #define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ |
| #define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ |
| #define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ |
| |
| #define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII) |
| #define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF)) |
| |
| /* The FEC stores dest/src/type/vlan, data, and checksum for receive packets. |
| */ |
| #define PKT_MAXBUF_SIZE 1522 |
| #define PKT_MINBUF_SIZE 64 |
| #define PKT_MAXBLR_SIZE 1536 |
| |
| /* FEC receive acceleration */ |
| #define FEC_RACC_IPDIS (1 << 1) |
| #define FEC_RACC_PRODIS (1 << 2) |
| #define FEC_RACC_OPTIONS (FEC_RACC_IPDIS | FEC_RACC_PRODIS) |
| |
| /* |
| * The 5270/5271/5280/5282/532x RX control register also contains maximum frame |
| * size bits. Other FEC hardware does not, so we need to take that into |
| * account when setting it. |
| */ |
| #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ |
| defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) |
| #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) |
| #else |
| #define OPT_FRAME_SIZE 0 |
| #endif |
| |
| /* FEC MII MMFR bits definition */ |
| #define FEC_MMFR_ST (1 << 30) |
| #define FEC_MMFR_OP_READ (2 << 28) |
| #define FEC_MMFR_OP_WRITE (1 << 28) |
| #define FEC_MMFR_PA(v) ((v & 0x1f) << 23) |
| #define FEC_MMFR_RA(v) ((v & 0x1f) << 18) |
| #define FEC_MMFR_TA (2 << 16) |
| #define FEC_MMFR_DATA(v) (v & 0xffff) |
| |
| #define FEC_MII_TIMEOUT 30000 /* us */ |
| |
| /* Transmitter timeout */ |
| #define TX_TIMEOUT (2 * HZ) |
| |
| #define FEC_PAUSE_FLAG_AUTONEG 0x1 |
| #define FEC_PAUSE_FLAG_ENABLE 0x2 |
| |
| static int mii_cnt; |
| |
| static struct bufdesc *fec_enet_get_nextdesc(struct bufdesc *bdp, int is_ex) |
| { |
| struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp; |
| if (is_ex) |
| return (struct bufdesc *)(ex + 1); |
| else |
| return bdp + 1; |
| } |
| |
| static struct bufdesc *fec_enet_get_prevdesc(struct bufdesc *bdp, int is_ex) |
| { |
| struct bufdesc_ex *ex = (struct bufdesc_ex *)bdp; |
| if (is_ex) |
| return (struct bufdesc *)(ex - 1); |
| else |
| return bdp - 1; |
| } |
| |
| static void *swap_buffer(void *bufaddr, int len) |
| { |
| int i; |
| unsigned int *buf = bufaddr; |
| |
| for (i = 0; i < DIV_ROUND_UP(len, 4); i++, buf++) |
| *buf = cpu_to_be32(*buf); |
| |
| return bufaddr; |
| } |
| |
| static int |
| fec_enet_clear_csum(struct sk_buff *skb, struct net_device *ndev) |
| { |
| /* Only run for packets requiring a checksum. */ |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| return 0; |
| |
| if (unlikely(skb_cow_head(skb, 0))) |
| return -1; |
| |
| *(__sum16 *)(skb->head + skb->csum_start + skb->csum_offset) = 0; |
| |
| return 0; |
| } |
| |
| static netdev_tx_t |
| fec_enet_start_xmit(struct sk_buff *skb, struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| struct bufdesc *bdp; |
| void *bufaddr; |
| unsigned short status; |
| unsigned int index; |
| |
| if (!fep->link) { |
| /* Link is down or auto-negotiation is in progress. */ |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* Fill in a Tx ring entry */ |
| bdp = fep->cur_tx; |
| |
| status = bdp->cbd_sc; |
| |
| if (status & BD_ENET_TX_READY) { |
| /* Ooops. All transmit buffers are full. Bail out. |
| * This should not happen, since ndev->tbusy should be set. |
| */ |
| netdev_err(ndev, "tx queue full!\n"); |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* Protocol checksum off-load for TCP and UDP. */ |
| if (fec_enet_clear_csum(skb, ndev)) { |
| kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* Clear all of the status flags */ |
| status &= ~BD_ENET_TX_STATS; |
| |
| /* Set buffer length and buffer pointer */ |
| bufaddr = skb->data; |
| bdp->cbd_datlen = skb->len; |
| |
| /* |
| * On some FEC implementations data must be aligned on |
| * 4-byte boundaries. Use bounce buffers to copy data |
| * and get it aligned. Ugh. |
| */ |
| if (fep->bufdesc_ex) |
| index = (struct bufdesc_ex *)bdp - |
| (struct bufdesc_ex *)fep->tx_bd_base; |
| else |
| index = bdp - fep->tx_bd_base; |
| |
| if (((unsigned long) bufaddr) & FEC_ALIGNMENT) { |
| memcpy(fep->tx_bounce[index], skb->data, skb->len); |
| bufaddr = fep->tx_bounce[index]; |
| } |
| |
| /* |
| * Some design made an incorrect assumption on endian mode of |
| * the system that it's running on. As the result, driver has to |
| * swap every frame going to and coming from the controller. |
| */ |
| if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) |
| swap_buffer(bufaddr, skb->len); |
| |
| /* Save skb pointer */ |
| fep->tx_skbuff[index] = skb; |
| |
| /* Push the data cache so the CPM does not get stale memory |
| * data. |
| */ |
| bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, bufaddr, |
| FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); |
| |
| /* Send it on its way. Tell FEC it's ready, interrupt when done, |
| * it's the last BD of the frame, and to put the CRC on the end. |
| */ |
| status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR |
| | BD_ENET_TX_LAST | BD_ENET_TX_TC); |
| bdp->cbd_sc = status; |
| |
| if (fep->bufdesc_ex) { |
| |
| struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; |
| ebdp->cbd_bdu = 0; |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP && |
| fep->hwts_tx_en)) { |
| ebdp->cbd_esc = (BD_ENET_TX_TS | BD_ENET_TX_INT); |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| } else { |
| ebdp->cbd_esc = BD_ENET_TX_INT; |
| |
| /* Enable protocol checksum flags |
| * We do not bother with the IP Checksum bits as they |
| * are done by the kernel |
| */ |
| if (skb->ip_summed == CHECKSUM_PARTIAL) |
| ebdp->cbd_esc |= BD_ENET_TX_PINS; |
| } |
| } |
| /* If this was the last BD in the ring, start at the beginning again. */ |
| if (status & BD_ENET_TX_WRAP) |
| bdp = fep->tx_bd_base; |
| else |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| |
| fep->cur_tx = bdp; |
| |
| if (fep->cur_tx == fep->dirty_tx) |
| netif_stop_queue(ndev); |
| |
| /* Trigger transmission start */ |
| writel(0, fep->hwp + FEC_X_DES_ACTIVE); |
| |
| skb_tx_timestamp(skb); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* Init RX & TX buffer descriptors |
| */ |
| static void fec_enet_bd_init(struct net_device *dev) |
| { |
| struct fec_enet_private *fep = netdev_priv(dev); |
| struct bufdesc *bdp; |
| unsigned int i; |
| |
| /* Initialize the receive buffer descriptors. */ |
| bdp = fep->rx_bd_base; |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| |
| /* Initialize the BD for every fragment in the page. */ |
| if (bdp->cbd_bufaddr) |
| bdp->cbd_sc = BD_ENET_RX_EMPTY; |
| else |
| bdp->cbd_sc = 0; |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| } |
| |
| /* Set the last buffer to wrap */ |
| bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); |
| bdp->cbd_sc |= BD_SC_WRAP; |
| |
| fep->cur_rx = fep->rx_bd_base; |
| |
| /* ...and the same for transmit */ |
| bdp = fep->tx_bd_base; |
| fep->cur_tx = bdp; |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| |
| /* Initialize the BD for every fragment in the page. */ |
| bdp->cbd_sc = 0; |
| if (bdp->cbd_bufaddr && fep->tx_skbuff[i]) { |
| dev_kfree_skb_any(fep->tx_skbuff[i]); |
| fep->tx_skbuff[i] = NULL; |
| } |
| bdp->cbd_bufaddr = 0; |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| } |
| |
| /* Set the last buffer to wrap */ |
| bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); |
| bdp->cbd_sc |= BD_SC_WRAP; |
| fep->dirty_tx = bdp; |
| } |
| |
| /* This function is called to start or restart the FEC during a link |
| * change. This only happens when switching between half and full |
| * duplex. |
| */ |
| static void |
| fec_restart(struct net_device *ndev, int duplex) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| int i; |
| u32 val; |
| u32 temp_mac[2]; |
| u32 rcntl = OPT_FRAME_SIZE | 0x04; |
| u32 ecntl = 0x2; /* ETHEREN */ |
| |
| if (netif_running(ndev)) { |
| netif_device_detach(ndev); |
| napi_disable(&fep->napi); |
| netif_stop_queue(ndev); |
| netif_tx_lock_bh(ndev); |
| } |
| |
| /* Whack a reset. We should wait for this. */ |
| writel(1, fep->hwp + FEC_ECNTRL); |
| udelay(10); |
| |
| /* |
| * enet-mac reset will reset mac address registers too, |
| * so need to reconfigure it. |
| */ |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { |
| memcpy(&temp_mac, ndev->dev_addr, ETH_ALEN); |
| writel(cpu_to_be32(temp_mac[0]), fep->hwp + FEC_ADDR_LOW); |
| writel(cpu_to_be32(temp_mac[1]), fep->hwp + FEC_ADDR_HIGH); |
| } |
| |
| /* Clear any outstanding interrupt. */ |
| writel(0xffc00000, fep->hwp + FEC_IEVENT); |
| |
| /* Setup multicast filter. */ |
| set_multicast_list(ndev); |
| #ifndef CONFIG_M5272 |
| writel(0, fep->hwp + FEC_HASH_TABLE_HIGH); |
| writel(0, fep->hwp + FEC_HASH_TABLE_LOW); |
| #endif |
| |
| /* Set maximum receive buffer size. */ |
| writel(PKT_MAXBLR_SIZE, fep->hwp + FEC_R_BUFF_SIZE); |
| |
| fec_enet_bd_init(ndev); |
| |
| /* Set receive and transmit descriptor base. */ |
| writel(fep->bd_dma, fep->hwp + FEC_R_DES_START); |
| if (fep->bufdesc_ex) |
| writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc_ex) |
| * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); |
| else |
| writel((unsigned long)fep->bd_dma + sizeof(struct bufdesc) |
| * RX_RING_SIZE, fep->hwp + FEC_X_DES_START); |
| |
| |
| for (i = 0; i <= TX_RING_MOD_MASK; i++) { |
| if (fep->tx_skbuff[i]) { |
| dev_kfree_skb_any(fep->tx_skbuff[i]); |
| fep->tx_skbuff[i] = NULL; |
| } |
| } |
| |
| /* Enable MII mode */ |
| if (duplex) { |
| /* FD enable */ |
| writel(0x04, fep->hwp + FEC_X_CNTRL); |
| } else { |
| /* No Rcv on Xmit */ |
| rcntl |= 0x02; |
| writel(0x0, fep->hwp + FEC_X_CNTRL); |
| } |
| |
| fep->full_duplex = duplex; |
| |
| /* Set MII speed */ |
| writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); |
| |
| #if !defined(CONFIG_M5272) |
| /* set RX checksum */ |
| val = readl(fep->hwp + FEC_RACC); |
| if (fep->csum_flags & FLAG_RX_CSUM_ENABLED) |
| val |= FEC_RACC_OPTIONS; |
| else |
| val &= ~FEC_RACC_OPTIONS; |
| writel(val, fep->hwp + FEC_RACC); |
| #endif |
| |
| /* |
| * The phy interface and speed need to get configured |
| * differently on enet-mac. |
| */ |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { |
| /* Enable flow control and length check */ |
| rcntl |= 0x40000000 | 0x00000020; |
| |
| /* RGMII, RMII or MII */ |
| if (fep->phy_interface == PHY_INTERFACE_MODE_RGMII) |
| rcntl |= (1 << 6); |
| else if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) |
| rcntl |= (1 << 8); |
| else |
| rcntl &= ~(1 << 8); |
| |
| /* 1G, 100M or 10M */ |
| if (fep->phy_dev) { |
| if (fep->phy_dev->speed == SPEED_1000) |
| ecntl |= (1 << 5); |
| else if (fep->phy_dev->speed == SPEED_100) |
| rcntl &= ~(1 << 9); |
| else |
| rcntl |= (1 << 9); |
| } |
| } else { |
| #ifdef FEC_MIIGSK_ENR |
| if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) { |
| u32 cfgr; |
| /* disable the gasket and wait */ |
| writel(0, fep->hwp + FEC_MIIGSK_ENR); |
| while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) |
| udelay(1); |
| |
| /* |
| * configure the gasket: |
| * RMII, 50 MHz, no loopback, no echo |
| * MII, 25 MHz, no loopback, no echo |
| */ |
| cfgr = (fep->phy_interface == PHY_INTERFACE_MODE_RMII) |
| ? BM_MIIGSK_CFGR_RMII : BM_MIIGSK_CFGR_MII; |
| if (fep->phy_dev && fep->phy_dev->speed == SPEED_10) |
| cfgr |= BM_MIIGSK_CFGR_FRCONT_10M; |
| writel(cfgr, fep->hwp + FEC_MIIGSK_CFGR); |
| |
| /* re-enable the gasket */ |
| writel(2, fep->hwp + FEC_MIIGSK_ENR); |
| } |
| #endif |
| } |
| |
| #if !defined(CONFIG_M5272) |
| /* enable pause frame*/ |
| if ((fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) || |
| ((fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) && |
| fep->phy_dev && fep->phy_dev->pause)) { |
| rcntl |= FEC_ENET_FCE; |
| |
| /* set FIFO threshold parameter to reduce overrun */ |
| writel(FEC_ENET_RSEM_V, fep->hwp + FEC_R_FIFO_RSEM); |
| writel(FEC_ENET_RSFL_V, fep->hwp + FEC_R_FIFO_RSFL); |
| writel(FEC_ENET_RAEM_V, fep->hwp + FEC_R_FIFO_RAEM); |
| writel(FEC_ENET_RAFL_V, fep->hwp + FEC_R_FIFO_RAFL); |
| |
| /* OPD */ |
| writel(FEC_ENET_OPD_V, fep->hwp + FEC_OPD); |
| } else { |
| rcntl &= ~FEC_ENET_FCE; |
| } |
| #endif /* !defined(CONFIG_M5272) */ |
| |
| writel(rcntl, fep->hwp + FEC_R_CNTRL); |
| |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { |
| /* enable ENET endian swap */ |
| ecntl |= (1 << 8); |
| /* enable ENET store and forward mode */ |
| writel(1 << 8, fep->hwp + FEC_X_WMRK); |
| } |
| |
| if (fep->bufdesc_ex) |
| ecntl |= (1 << 4); |
| |
| #ifndef CONFIG_M5272 |
| /* Enable the MIB statistic event counters */ |
| writel(0 << 31, fep->hwp + FEC_MIB_CTRLSTAT); |
| #endif |
| |
| /* And last, enable the transmit and receive processing */ |
| writel(ecntl, fep->hwp + FEC_ECNTRL); |
| writel(0, fep->hwp + FEC_R_DES_ACTIVE); |
| |
| if (fep->bufdesc_ex) |
| fec_ptp_start_cyclecounter(ndev); |
| |
| /* Enable interrupts we wish to service */ |
| writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); |
| |
| if (netif_running(ndev)) { |
| netif_tx_unlock_bh(ndev); |
| netif_wake_queue(ndev); |
| napi_enable(&fep->napi); |
| netif_device_attach(ndev); |
| } |
| } |
| |
| static void |
| fec_stop(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8); |
| |
| /* We cannot expect a graceful transmit stop without link !!! */ |
| if (fep->link) { |
| writel(1, fep->hwp + FEC_X_CNTRL); /* Graceful transmit stop */ |
| udelay(10); |
| if (!(readl(fep->hwp + FEC_IEVENT) & FEC_ENET_GRA)) |
| netdev_err(ndev, "Graceful transmit stop did not complete!\n"); |
| } |
| |
| /* Whack a reset. We should wait for this. */ |
| writel(1, fep->hwp + FEC_ECNTRL); |
| udelay(10); |
| writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); |
| writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); |
| |
| /* We have to keep ENET enabled to have MII interrupt stay working */ |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) { |
| writel(2, fep->hwp + FEC_ECNTRL); |
| writel(rmii_mode, fep->hwp + FEC_R_CNTRL); |
| } |
| } |
| |
| |
| static void |
| fec_timeout(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| ndev->stats.tx_errors++; |
| |
| fep->delay_work.timeout = true; |
| schedule_delayed_work(&(fep->delay_work.delay_work), 0); |
| } |
| |
| static void fec_enet_work(struct work_struct *work) |
| { |
| struct fec_enet_private *fep = |
| container_of(work, |
| struct fec_enet_private, |
| delay_work.delay_work.work); |
| |
| if (fep->delay_work.timeout) { |
| fep->delay_work.timeout = false; |
| fec_restart(fep->netdev, fep->full_duplex); |
| netif_wake_queue(fep->netdev); |
| } |
| } |
| |
| static void |
| fec_enet_tx(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep; |
| struct bufdesc *bdp; |
| unsigned short status; |
| struct sk_buff *skb; |
| int index = 0; |
| |
| fep = netdev_priv(ndev); |
| bdp = fep->dirty_tx; |
| |
| /* get next bdp of dirty_tx */ |
| if (bdp->cbd_sc & BD_ENET_TX_WRAP) |
| bdp = fep->tx_bd_base; |
| else |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| |
| while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) { |
| |
| /* current queue is empty */ |
| if (bdp == fep->cur_tx) |
| break; |
| |
| if (fep->bufdesc_ex) |
| index = (struct bufdesc_ex *)bdp - |
| (struct bufdesc_ex *)fep->tx_bd_base; |
| else |
| index = bdp - fep->tx_bd_base; |
| |
| dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, |
| FEC_ENET_TX_FRSIZE, DMA_TO_DEVICE); |
| bdp->cbd_bufaddr = 0; |
| |
| skb = fep->tx_skbuff[index]; |
| |
| /* Check for errors. */ |
| if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC | |
| BD_ENET_TX_RL | BD_ENET_TX_UN | |
| BD_ENET_TX_CSL)) { |
| ndev->stats.tx_errors++; |
| if (status & BD_ENET_TX_HB) /* No heartbeat */ |
| ndev->stats.tx_heartbeat_errors++; |
| if (status & BD_ENET_TX_LC) /* Late collision */ |
| ndev->stats.tx_window_errors++; |
| if (status & BD_ENET_TX_RL) /* Retrans limit */ |
| ndev->stats.tx_aborted_errors++; |
| if (status & BD_ENET_TX_UN) /* Underrun */ |
| ndev->stats.tx_fifo_errors++; |
| if (status & BD_ENET_TX_CSL) /* Carrier lost */ |
| ndev->stats.tx_carrier_errors++; |
| } else { |
| ndev->stats.tx_packets++; |
| ndev->stats.tx_bytes += bdp->cbd_datlen; |
| } |
| |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) && |
| fep->bufdesc_ex) { |
| struct skb_shared_hwtstamps shhwtstamps; |
| unsigned long flags; |
| struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; |
| |
| memset(&shhwtstamps, 0, sizeof(shhwtstamps)); |
| spin_lock_irqsave(&fep->tmreg_lock, flags); |
| shhwtstamps.hwtstamp = ns_to_ktime( |
| timecounter_cyc2time(&fep->tc, ebdp->ts)); |
| spin_unlock_irqrestore(&fep->tmreg_lock, flags); |
| skb_tstamp_tx(skb, &shhwtstamps); |
| } |
| |
| if (status & BD_ENET_TX_READY) |
| netdev_err(ndev, "HEY! Enet xmit interrupt and TX_READY\n"); |
| |
| /* Deferred means some collisions occurred during transmit, |
| * but we eventually sent the packet OK. |
| */ |
| if (status & BD_ENET_TX_DEF) |
| ndev->stats.collisions++; |
| |
| /* Free the sk buffer associated with this last transmit */ |
| dev_kfree_skb_any(skb); |
| fep->tx_skbuff[index] = NULL; |
| |
| fep->dirty_tx = bdp; |
| |
| /* Update pointer to next buffer descriptor to be transmitted */ |
| if (status & BD_ENET_TX_WRAP) |
| bdp = fep->tx_bd_base; |
| else |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| |
| /* Since we have freed up a buffer, the ring is no longer full |
| */ |
| if (fep->dirty_tx != fep->cur_tx) { |
| if (netif_queue_stopped(ndev)) |
| netif_wake_queue(ndev); |
| } |
| } |
| return; |
| } |
| |
| |
| /* During a receive, the cur_rx points to the current incoming buffer. |
| * When we update through the ring, if the next incoming buffer has |
| * not been given to the system, we just set the empty indicator, |
| * effectively tossing the packet. |
| */ |
| static int |
| fec_enet_rx(struct net_device *ndev, int budget) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| struct bufdesc *bdp; |
| unsigned short status; |
| struct sk_buff *skb; |
| ushort pkt_len; |
| __u8 *data; |
| int pkt_received = 0; |
| struct bufdesc_ex *ebdp = NULL; |
| bool vlan_packet_rcvd = false; |
| u16 vlan_tag; |
| |
| #ifdef CONFIG_M532x |
| flush_cache_all(); |
| #endif |
| |
| /* First, grab all of the stats for the incoming packet. |
| * These get messed up if we get called due to a busy condition. |
| */ |
| bdp = fep->cur_rx; |
| |
| while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) { |
| |
| if (pkt_received >= budget) |
| break; |
| pkt_received++; |
| |
| /* Since we have allocated space to hold a complete frame, |
| * the last indicator should be set. |
| */ |
| if ((status & BD_ENET_RX_LAST) == 0) |
| netdev_err(ndev, "rcv is not +last\n"); |
| |
| if (!fep->opened) |
| goto rx_processing_done; |
| |
| /* Check for errors. */ |
| if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | |
| BD_ENET_RX_CR | BD_ENET_RX_OV)) { |
| ndev->stats.rx_errors++; |
| if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) { |
| /* Frame too long or too short. */ |
| ndev->stats.rx_length_errors++; |
| } |
| if (status & BD_ENET_RX_NO) /* Frame alignment */ |
| ndev->stats.rx_frame_errors++; |
| if (status & BD_ENET_RX_CR) /* CRC Error */ |
| ndev->stats.rx_crc_errors++; |
| if (status & BD_ENET_RX_OV) /* FIFO overrun */ |
| ndev->stats.rx_fifo_errors++; |
| } |
| |
| /* Report late collisions as a frame error. |
| * On this error, the BD is closed, but we don't know what we |
| * have in the buffer. So, just drop this frame on the floor. |
| */ |
| if (status & BD_ENET_RX_CL) { |
| ndev->stats.rx_errors++; |
| ndev->stats.rx_frame_errors++; |
| goto rx_processing_done; |
| } |
| |
| /* Process the incoming frame. */ |
| ndev->stats.rx_packets++; |
| pkt_len = bdp->cbd_datlen; |
| ndev->stats.rx_bytes += pkt_len; |
| data = (__u8*)__va(bdp->cbd_bufaddr); |
| |
| dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, |
| FEC_ENET_TX_FRSIZE, DMA_FROM_DEVICE); |
| |
| if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME) |
| swap_buffer(data, pkt_len); |
| |
| /* Extract the enhanced buffer descriptor */ |
| ebdp = NULL; |
| if (fep->bufdesc_ex) |
| ebdp = (struct bufdesc_ex *)bdp; |
| |
| /* If this is a VLAN packet remove the VLAN Tag */ |
| vlan_packet_rcvd = false; |
| if ((ndev->features & NETIF_F_HW_VLAN_CTAG_RX) && |
| fep->bufdesc_ex && (ebdp->cbd_esc & BD_ENET_RX_VLAN)) { |
| /* Push and remove the vlan tag */ |
| struct vlan_hdr *vlan_header = |
| (struct vlan_hdr *) (data + ETH_HLEN); |
| vlan_tag = ntohs(vlan_header->h_vlan_TCI); |
| pkt_len -= VLAN_HLEN; |
| |
| vlan_packet_rcvd = true; |
| } |
| |
| /* This does 16 byte alignment, exactly what we need. |
| * The packet length includes FCS, but we don't want to |
| * include that when passing upstream as it messes up |
| * bridging applications. |
| */ |
| skb = netdev_alloc_skb(ndev, pkt_len - 4 + NET_IP_ALIGN); |
| |
| if (unlikely(!skb)) { |
| ndev->stats.rx_dropped++; |
| } else { |
| int payload_offset = (2 * ETH_ALEN); |
| skb_reserve(skb, NET_IP_ALIGN); |
| skb_put(skb, pkt_len - 4); /* Make room */ |
| |
| /* Extract the frame data without the VLAN header. */ |
| skb_copy_to_linear_data(skb, data, (2 * ETH_ALEN)); |
| if (vlan_packet_rcvd) |
| payload_offset = (2 * ETH_ALEN) + VLAN_HLEN; |
| skb_copy_to_linear_data_offset(skb, (2 * ETH_ALEN), |
| data + payload_offset, |
| pkt_len - 4 - (2 * ETH_ALEN)); |
| |
| skb->protocol = eth_type_trans(skb, ndev); |
| |
| /* Get receive timestamp from the skb */ |
| if (fep->hwts_rx_en && fep->bufdesc_ex) { |
| struct skb_shared_hwtstamps *shhwtstamps = |
| skb_hwtstamps(skb); |
| unsigned long flags; |
| |
| memset(shhwtstamps, 0, sizeof(*shhwtstamps)); |
| |
| spin_lock_irqsave(&fep->tmreg_lock, flags); |
| shhwtstamps->hwtstamp = ns_to_ktime( |
| timecounter_cyc2time(&fep->tc, ebdp->ts)); |
| spin_unlock_irqrestore(&fep->tmreg_lock, flags); |
| } |
| |
| if (fep->bufdesc_ex && |
| (fep->csum_flags & FLAG_RX_CSUM_ENABLED)) { |
| if (!(ebdp->cbd_esc & FLAG_RX_CSUM_ERROR)) { |
| /* don't check it */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| } else { |
| skb_checksum_none_assert(skb); |
| } |
| } |
| |
| /* Handle received VLAN packets */ |
| if (vlan_packet_rcvd) |
| __vlan_hwaccel_put_tag(skb, |
| htons(ETH_P_8021Q), |
| vlan_tag); |
| |
| if (!skb_defer_rx_timestamp(skb)) |
| napi_gro_receive(&fep->napi, skb); |
| } |
| |
| bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, data, |
| FEC_ENET_TX_FRSIZE, DMA_FROM_DEVICE); |
| rx_processing_done: |
| /* Clear the status flags for this buffer */ |
| status &= ~BD_ENET_RX_STATS; |
| |
| /* Mark the buffer empty */ |
| status |= BD_ENET_RX_EMPTY; |
| bdp->cbd_sc = status; |
| |
| if (fep->bufdesc_ex) { |
| struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; |
| |
| ebdp->cbd_esc = BD_ENET_RX_INT; |
| ebdp->cbd_prot = 0; |
| ebdp->cbd_bdu = 0; |
| } |
| |
| /* Update BD pointer to next entry */ |
| if (status & BD_ENET_RX_WRAP) |
| bdp = fep->rx_bd_base; |
| else |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| /* Doing this here will keep the FEC running while we process |
| * incoming frames. On a heavily loaded network, we should be |
| * able to keep up at the expense of system resources. |
| */ |
| writel(0, fep->hwp + FEC_R_DES_ACTIVE); |
| } |
| fep->cur_rx = bdp; |
| |
| return pkt_received; |
| } |
| |
| static irqreturn_t |
| fec_enet_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *ndev = dev_id; |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| uint int_events; |
| irqreturn_t ret = IRQ_NONE; |
| |
| do { |
| int_events = readl(fep->hwp + FEC_IEVENT); |
| writel(int_events, fep->hwp + FEC_IEVENT); |
| |
| if (int_events & (FEC_ENET_RXF | FEC_ENET_TXF)) { |
| ret = IRQ_HANDLED; |
| |
| /* Disable the RX interrupt */ |
| if (napi_schedule_prep(&fep->napi)) { |
| writel(FEC_RX_DISABLED_IMASK, |
| fep->hwp + FEC_IMASK); |
| __napi_schedule(&fep->napi); |
| } |
| } |
| |
| if (int_events & FEC_ENET_MII) { |
| ret = IRQ_HANDLED; |
| complete(&fep->mdio_done); |
| } |
| } while (int_events); |
| |
| return ret; |
| } |
| |
| static int fec_enet_rx_napi(struct napi_struct *napi, int budget) |
| { |
| struct net_device *ndev = napi->dev; |
| int pkts = fec_enet_rx(ndev, budget); |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| fec_enet_tx(ndev); |
| |
| if (pkts < budget) { |
| napi_complete(napi); |
| writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK); |
| } |
| return pkts; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| static void fec_get_mac(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct fec_platform_data *pdata = fep->pdev->dev.platform_data; |
| unsigned char *iap, tmpaddr[ETH_ALEN]; |
| |
| /* |
| * try to get mac address in following order: |
| * |
| * 1) module parameter via kernel command line in form |
| * fec.macaddr=0x00,0x04,0x9f,0x01,0x30,0xe0 |
| */ |
| iap = macaddr; |
| |
| /* |
| * 2) from device tree data |
| */ |
| if (!is_valid_ether_addr(iap)) { |
| struct device_node *np = fep->pdev->dev.of_node; |
| if (np) { |
| const char *mac = of_get_mac_address(np); |
| if (mac) |
| iap = (unsigned char *) mac; |
| } |
| } |
| |
| /* |
| * 3) from flash or fuse (via platform data) |
| */ |
| if (!is_valid_ether_addr(iap)) { |
| #ifdef CONFIG_M5272 |
| if (FEC_FLASHMAC) |
| iap = (unsigned char *)FEC_FLASHMAC; |
| #else |
| if (pdata) |
| iap = (unsigned char *)&pdata->mac; |
| #endif |
| } |
| |
| /* |
| * 4) FEC mac registers set by bootloader |
| */ |
| if (!is_valid_ether_addr(iap)) { |
| *((unsigned long *) &tmpaddr[0]) = |
| be32_to_cpu(readl(fep->hwp + FEC_ADDR_LOW)); |
| *((unsigned short *) &tmpaddr[4]) = |
| be16_to_cpu(readl(fep->hwp + FEC_ADDR_HIGH) >> 16); |
| iap = &tmpaddr[0]; |
| } |
| |
| /* |
| * 5) random mac address |
| */ |
| if (!is_valid_ether_addr(iap)) { |
| /* Report it and use a random ethernet address instead */ |
| netdev_err(ndev, "Invalid MAC address: %pM\n", iap); |
| eth_hw_addr_random(ndev); |
| netdev_info(ndev, "Using random MAC address: %pM\n", |
| ndev->dev_addr); |
| return; |
| } |
| |
| memcpy(ndev->dev_addr, iap, ETH_ALEN); |
| |
| /* Adjust MAC if using macaddr */ |
| if (iap == macaddr) |
| ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* |
| * Phy section |
| */ |
| static void fec_enet_adjust_link(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct phy_device *phy_dev = fep->phy_dev; |
| int status_change = 0; |
| |
| /* Prevent a state halted on mii error */ |
| if (fep->mii_timeout && phy_dev->state == PHY_HALTED) { |
| phy_dev->state = PHY_RESUMING; |
| return; |
| } |
| |
| if (phy_dev->link) { |
| if (!fep->link) { |
| fep->link = phy_dev->link; |
| status_change = 1; |
| } |
| |
| if (fep->full_duplex != phy_dev->duplex) |
| status_change = 1; |
| |
| if (phy_dev->speed != fep->speed) { |
| fep->speed = phy_dev->speed; |
| status_change = 1; |
| } |
| |
| /* if any of the above changed restart the FEC */ |
| if (status_change) |
| fec_restart(ndev, phy_dev->duplex); |
| } else { |
| if (fep->link) { |
| fec_stop(ndev); |
| fep->link = phy_dev->link; |
| status_change = 1; |
| } |
| } |
| |
| if (status_change) |
| phy_print_status(phy_dev); |
| } |
| |
| static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| struct fec_enet_private *fep = bus->priv; |
| unsigned long time_left; |
| |
| fep->mii_timeout = 0; |
| init_completion(&fep->mdio_done); |
| |
| /* start a read op */ |
| writel(FEC_MMFR_ST | FEC_MMFR_OP_READ | |
| FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | |
| FEC_MMFR_TA, fep->hwp + FEC_MII_DATA); |
| |
| /* wait for end of transfer */ |
| time_left = wait_for_completion_timeout(&fep->mdio_done, |
| usecs_to_jiffies(FEC_MII_TIMEOUT)); |
| if (time_left == 0) { |
| fep->mii_timeout = 1; |
| netdev_err(fep->netdev, "MDIO read timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* return value */ |
| return FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA)); |
| } |
| |
| static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum, |
| u16 value) |
| { |
| struct fec_enet_private *fep = bus->priv; |
| unsigned long time_left; |
| |
| fep->mii_timeout = 0; |
| init_completion(&fep->mdio_done); |
| |
| /* start a write op */ |
| writel(FEC_MMFR_ST | FEC_MMFR_OP_WRITE | |
| FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(regnum) | |
| FEC_MMFR_TA | FEC_MMFR_DATA(value), |
| fep->hwp + FEC_MII_DATA); |
| |
| /* wait for end of transfer */ |
| time_left = wait_for_completion_timeout(&fep->mdio_done, |
| usecs_to_jiffies(FEC_MII_TIMEOUT)); |
| if (time_left == 0) { |
| fep->mii_timeout = 1; |
| netdev_err(fep->netdev, "MDIO write timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static int fec_enet_mdio_reset(struct mii_bus *bus) |
| { |
| return 0; |
| } |
| |
| static int fec_enet_mii_probe(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| struct phy_device *phy_dev = NULL; |
| char mdio_bus_id[MII_BUS_ID_SIZE]; |
| char phy_name[MII_BUS_ID_SIZE + 3]; |
| int phy_id; |
| int dev_id = fep->dev_id; |
| |
| fep->phy_dev = NULL; |
| |
| /* check for attached phy */ |
| for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) { |
| if ((fep->mii_bus->phy_mask & (1 << phy_id))) |
| continue; |
| if (fep->mii_bus->phy_map[phy_id] == NULL) |
| continue; |
| if (fep->mii_bus->phy_map[phy_id]->phy_id == 0) |
| continue; |
| if (dev_id--) |
| continue; |
| strncpy(mdio_bus_id, fep->mii_bus->id, MII_BUS_ID_SIZE); |
| break; |
| } |
| |
| if (phy_id >= PHY_MAX_ADDR) { |
| netdev_info(ndev, "no PHY, assuming direct connection to switch\n"); |
| strncpy(mdio_bus_id, "fixed-0", MII_BUS_ID_SIZE); |
| phy_id = 0; |
| } |
| |
| snprintf(phy_name, sizeof(phy_name), PHY_ID_FMT, mdio_bus_id, phy_id); |
| phy_dev = phy_connect(ndev, phy_name, &fec_enet_adjust_link, |
| fep->phy_interface); |
| if (IS_ERR(phy_dev)) { |
| netdev_err(ndev, "could not attach to PHY\n"); |
| return PTR_ERR(phy_dev); |
| } |
| |
| /* mask with MAC supported features */ |
| if (id_entry->driver_data & FEC_QUIRK_HAS_GBIT) { |
| phy_dev->supported &= PHY_GBIT_FEATURES; |
| #if !defined(CONFIG_M5272) |
| phy_dev->supported |= SUPPORTED_Pause; |
| #endif |
| } |
| else |
| phy_dev->supported &= PHY_BASIC_FEATURES; |
| |
| phy_dev->advertising = phy_dev->supported; |
| |
| fep->phy_dev = phy_dev; |
| fep->link = 0; |
| fep->full_duplex = 0; |
| |
| netdev_info(ndev, "Freescale FEC PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", |
| fep->phy_dev->drv->name, dev_name(&fep->phy_dev->dev), |
| fep->phy_dev->irq); |
| |
| return 0; |
| } |
| |
| static int fec_enet_mii_init(struct platform_device *pdev) |
| { |
| static struct mii_bus *fec0_mii_bus; |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| int err = -ENXIO, i; |
| |
| /* |
| * The dual fec interfaces are not equivalent with enet-mac. |
| * Here are the differences: |
| * |
| * - fec0 supports MII & RMII modes while fec1 only supports RMII |
| * - fec0 acts as the 1588 time master while fec1 is slave |
| * - external phys can only be configured by fec0 |
| * |
| * That is to say fec1 can not work independently. It only works |
| * when fec0 is working. The reason behind this design is that the |
| * second interface is added primarily for Switch mode. |
| * |
| * Because of the last point above, both phys are attached on fec0 |
| * mdio interface in board design, and need to be configured by |
| * fec0 mii_bus. |
| */ |
| if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) { |
| /* fec1 uses fec0 mii_bus */ |
| if (mii_cnt && fec0_mii_bus) { |
| fep->mii_bus = fec0_mii_bus; |
| mii_cnt++; |
| return 0; |
| } |
| return -ENOENT; |
| } |
| |
| fep->mii_timeout = 0; |
| |
| /* |
| * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) |
| * |
| * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while |
| * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. The i.MX28 |
| * Reference Manual has an error on this, and gets fixed on i.MX6Q |
| * document. |
| */ |
| fep->phy_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ahb), 5000000); |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) |
| fep->phy_speed--; |
| fep->phy_speed <<= 1; |
| writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED); |
| |
| fep->mii_bus = mdiobus_alloc(); |
| if (fep->mii_bus == NULL) { |
| err = -ENOMEM; |
| goto err_out; |
| } |
| |
| fep->mii_bus->name = "fec_enet_mii_bus"; |
| fep->mii_bus->read = fec_enet_mdio_read; |
| fep->mii_bus->write = fec_enet_mdio_write; |
| fep->mii_bus->reset = fec_enet_mdio_reset; |
| snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", |
| pdev->name, fep->dev_id + 1); |
| fep->mii_bus->priv = fep; |
| fep->mii_bus->parent = &pdev->dev; |
| |
| fep->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); |
| if (!fep->mii_bus->irq) { |
| err = -ENOMEM; |
| goto err_out_free_mdiobus; |
| } |
| |
| for (i = 0; i < PHY_MAX_ADDR; i++) |
| fep->mii_bus->irq[i] = PHY_POLL; |
| |
| if (mdiobus_register(fep->mii_bus)) |
| goto err_out_free_mdio_irq; |
| |
| mii_cnt++; |
| |
| /* save fec0 mii_bus */ |
| if (id_entry->driver_data & FEC_QUIRK_ENET_MAC) |
| fec0_mii_bus = fep->mii_bus; |
| |
| return 0; |
| |
| err_out_free_mdio_irq: |
| kfree(fep->mii_bus->irq); |
| err_out_free_mdiobus: |
| mdiobus_free(fep->mii_bus); |
| err_out: |
| return err; |
| } |
| |
| static void fec_enet_mii_remove(struct fec_enet_private *fep) |
| { |
| if (--mii_cnt == 0) { |
| mdiobus_unregister(fep->mii_bus); |
| kfree(fep->mii_bus->irq); |
| mdiobus_free(fep->mii_bus); |
| } |
| } |
| |
| static int fec_enet_get_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct phy_device *phydev = fep->phy_dev; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| return phy_ethtool_gset(phydev, cmd); |
| } |
| |
| static int fec_enet_set_settings(struct net_device *ndev, |
| struct ethtool_cmd *cmd) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct phy_device *phydev = fep->phy_dev; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| return phy_ethtool_sset(phydev, cmd); |
| } |
| |
| static void fec_enet_get_drvinfo(struct net_device *ndev, |
| struct ethtool_drvinfo *info) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| strlcpy(info->driver, fep->pdev->dev.driver->name, |
| sizeof(info->driver)); |
| strlcpy(info->version, "Revision: 1.0", sizeof(info->version)); |
| strlcpy(info->bus_info, dev_name(&ndev->dev), sizeof(info->bus_info)); |
| } |
| |
| static int fec_enet_get_ts_info(struct net_device *ndev, |
| struct ethtool_ts_info *info) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| if (fep->bufdesc_ex) { |
| |
| info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | |
| SOF_TIMESTAMPING_RX_SOFTWARE | |
| SOF_TIMESTAMPING_SOFTWARE | |
| SOF_TIMESTAMPING_TX_HARDWARE | |
| SOF_TIMESTAMPING_RX_HARDWARE | |
| SOF_TIMESTAMPING_RAW_HARDWARE; |
| if (fep->ptp_clock) |
| info->phc_index = ptp_clock_index(fep->ptp_clock); |
| else |
| info->phc_index = -1; |
| |
| info->tx_types = (1 << HWTSTAMP_TX_OFF) | |
| (1 << HWTSTAMP_TX_ON); |
| |
| info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | |
| (1 << HWTSTAMP_FILTER_ALL); |
| return 0; |
| } else { |
| return ethtool_op_get_ts_info(ndev, info); |
| } |
| } |
| |
| #if !defined(CONFIG_M5272) |
| |
| static void fec_enet_get_pauseparam(struct net_device *ndev, |
| struct ethtool_pauseparam *pause) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| pause->autoneg = (fep->pause_flag & FEC_PAUSE_FLAG_AUTONEG) != 0; |
| pause->tx_pause = (fep->pause_flag & FEC_PAUSE_FLAG_ENABLE) != 0; |
| pause->rx_pause = pause->tx_pause; |
| } |
| |
| static int fec_enet_set_pauseparam(struct net_device *ndev, |
| struct ethtool_pauseparam *pause) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| if (pause->tx_pause != pause->rx_pause) { |
| netdev_info(ndev, |
| "hardware only support enable/disable both tx and rx"); |
| return -EINVAL; |
| } |
| |
| fep->pause_flag = 0; |
| |
| /* tx pause must be same as rx pause */ |
| fep->pause_flag |= pause->rx_pause ? FEC_PAUSE_FLAG_ENABLE : 0; |
| fep->pause_flag |= pause->autoneg ? FEC_PAUSE_FLAG_AUTONEG : 0; |
| |
| if (pause->rx_pause || pause->autoneg) { |
| fep->phy_dev->supported |= ADVERTISED_Pause; |
| fep->phy_dev->advertising |= ADVERTISED_Pause; |
| } else { |
| fep->phy_dev->supported &= ~ADVERTISED_Pause; |
| fep->phy_dev->advertising &= ~ADVERTISED_Pause; |
| } |
| |
| if (pause->autoneg) { |
| if (netif_running(ndev)) |
| fec_stop(ndev); |
| phy_start_aneg(fep->phy_dev); |
| } |
| if (netif_running(ndev)) |
| fec_restart(ndev, 0); |
| |
| return 0; |
| } |
| |
| static const struct fec_stat { |
| char name[ETH_GSTRING_LEN]; |
| u16 offset; |
| } fec_stats[] = { |
| /* RMON TX */ |
| { "tx_dropped", RMON_T_DROP }, |
| { "tx_packets", RMON_T_PACKETS }, |
| { "tx_broadcast", RMON_T_BC_PKT }, |
| { "tx_multicast", RMON_T_MC_PKT }, |
| { "tx_crc_errors", RMON_T_CRC_ALIGN }, |
| { "tx_undersize", RMON_T_UNDERSIZE }, |
| { "tx_oversize", RMON_T_OVERSIZE }, |
| { "tx_fragment", RMON_T_FRAG }, |
| { "tx_jabber", RMON_T_JAB }, |
| { "tx_collision", RMON_T_COL }, |
| { "tx_64byte", RMON_T_P64 }, |
| { "tx_65to127byte", RMON_T_P65TO127 }, |
| { "tx_128to255byte", RMON_T_P128TO255 }, |
| { "tx_256to511byte", RMON_T_P256TO511 }, |
| { "tx_512to1023byte", RMON_T_P512TO1023 }, |
| { "tx_1024to2047byte", RMON_T_P1024TO2047 }, |
| { "tx_GTE2048byte", RMON_T_P_GTE2048 }, |
| { "tx_octets", RMON_T_OCTETS }, |
| |
| /* IEEE TX */ |
| { "IEEE_tx_drop", IEEE_T_DROP }, |
| { "IEEE_tx_frame_ok", IEEE_T_FRAME_OK }, |
| { "IEEE_tx_1col", IEEE_T_1COL }, |
| { "IEEE_tx_mcol", IEEE_T_MCOL }, |
| { "IEEE_tx_def", IEEE_T_DEF }, |
| { "IEEE_tx_lcol", IEEE_T_LCOL }, |
| { "IEEE_tx_excol", IEEE_T_EXCOL }, |
| { "IEEE_tx_macerr", IEEE_T_MACERR }, |
| { "IEEE_tx_cserr", IEEE_T_CSERR }, |
| { "IEEE_tx_sqe", IEEE_T_SQE }, |
| { "IEEE_tx_fdxfc", IEEE_T_FDXFC }, |
| { "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK }, |
| |
| /* RMON RX */ |
| { "rx_packets", RMON_R_PACKETS }, |
| { "rx_broadcast", RMON_R_BC_PKT }, |
| { "rx_multicast", RMON_R_MC_PKT }, |
| { "rx_crc_errors", RMON_R_CRC_ALIGN }, |
| { "rx_undersize", RMON_R_UNDERSIZE }, |
| { "rx_oversize", RMON_R_OVERSIZE }, |
| { "rx_fragment", RMON_R_FRAG }, |
| { "rx_jabber", RMON_R_JAB }, |
| { "rx_64byte", RMON_R_P64 }, |
| { "rx_65to127byte", RMON_R_P65TO127 }, |
| { "rx_128to255byte", RMON_R_P128TO255 }, |
| { "rx_256to511byte", RMON_R_P256TO511 }, |
| { "rx_512to1023byte", RMON_R_P512TO1023 }, |
| { "rx_1024to2047byte", RMON_R_P1024TO2047 }, |
| { "rx_GTE2048byte", RMON_R_P_GTE2048 }, |
| { "rx_octets", RMON_R_OCTETS }, |
| |
| /* IEEE RX */ |
| { "IEEE_rx_drop", IEEE_R_DROP }, |
| { "IEEE_rx_frame_ok", IEEE_R_FRAME_OK }, |
| { "IEEE_rx_crc", IEEE_R_CRC }, |
| { "IEEE_rx_align", IEEE_R_ALIGN }, |
| { "IEEE_rx_macerr", IEEE_R_MACERR }, |
| { "IEEE_rx_fdxfc", IEEE_R_FDXFC }, |
| { "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK }, |
| }; |
| |
| static void fec_enet_get_ethtool_stats(struct net_device *dev, |
| struct ethtool_stats *stats, u64 *data) |
| { |
| struct fec_enet_private *fep = netdev_priv(dev); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(fec_stats); i++) |
| data[i] = readl(fep->hwp + fec_stats[i].offset); |
| } |
| |
| static void fec_enet_get_strings(struct net_device *netdev, |
| u32 stringset, u8 *data) |
| { |
| int i; |
| switch (stringset) { |
| case ETH_SS_STATS: |
| for (i = 0; i < ARRAY_SIZE(fec_stats); i++) |
| memcpy(data + i * ETH_GSTRING_LEN, |
| fec_stats[i].name, ETH_GSTRING_LEN); |
| break; |
| } |
| } |
| |
| static int fec_enet_get_sset_count(struct net_device *dev, int sset) |
| { |
| switch (sset) { |
| case ETH_SS_STATS: |
| return ARRAY_SIZE(fec_stats); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| #endif /* !defined(CONFIG_M5272) */ |
| |
| static int fec_enet_nway_reset(struct net_device *dev) |
| { |
| struct fec_enet_private *fep = netdev_priv(dev); |
| struct phy_device *phydev = fep->phy_dev; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| return genphy_restart_aneg(phydev); |
| } |
| |
| static const struct ethtool_ops fec_enet_ethtool_ops = { |
| #if !defined(CONFIG_M5272) |
| .get_pauseparam = fec_enet_get_pauseparam, |
| .set_pauseparam = fec_enet_set_pauseparam, |
| #endif |
| .get_settings = fec_enet_get_settings, |
| .set_settings = fec_enet_set_settings, |
| .get_drvinfo = fec_enet_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_ts_info = fec_enet_get_ts_info, |
| .nway_reset = fec_enet_nway_reset, |
| #ifndef CONFIG_M5272 |
| .get_ethtool_stats = fec_enet_get_ethtool_stats, |
| .get_strings = fec_enet_get_strings, |
| .get_sset_count = fec_enet_get_sset_count, |
| #endif |
| }; |
| |
| static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct phy_device *phydev = fep->phy_dev; |
| |
| if (!netif_running(ndev)) |
| return -EINVAL; |
| |
| if (!phydev) |
| return -ENODEV; |
| |
| if (cmd == SIOCSHWTSTAMP && fep->bufdesc_ex) |
| return fec_ptp_ioctl(ndev, rq, cmd); |
| |
| return phy_mii_ioctl(phydev, rq, cmd); |
| } |
| |
| static void fec_enet_free_buffers(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| unsigned int i; |
| struct sk_buff *skb; |
| struct bufdesc *bdp; |
| |
| bdp = fep->rx_bd_base; |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| skb = fep->rx_skbuff[i]; |
| |
| if (bdp->cbd_bufaddr) |
| dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr, |
| FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); |
| if (skb) |
| dev_kfree_skb(skb); |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| } |
| |
| bdp = fep->tx_bd_base; |
| for (i = 0; i < TX_RING_SIZE; i++) |
| kfree(fep->tx_bounce[i]); |
| } |
| |
| static int fec_enet_alloc_buffers(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| unsigned int i; |
| struct sk_buff *skb; |
| struct bufdesc *bdp; |
| |
| bdp = fep->rx_bd_base; |
| for (i = 0; i < RX_RING_SIZE; i++) { |
| skb = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE); |
| if (!skb) { |
| fec_enet_free_buffers(ndev); |
| return -ENOMEM; |
| } |
| fep->rx_skbuff[i] = skb; |
| |
| bdp->cbd_bufaddr = dma_map_single(&fep->pdev->dev, skb->data, |
| FEC_ENET_RX_FRSIZE, DMA_FROM_DEVICE); |
| bdp->cbd_sc = BD_ENET_RX_EMPTY; |
| |
| if (fep->bufdesc_ex) { |
| struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; |
| ebdp->cbd_esc = BD_ENET_RX_INT; |
| } |
| |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| } |
| |
| /* Set the last buffer to wrap. */ |
| bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); |
| bdp->cbd_sc |= BD_SC_WRAP; |
| |
| bdp = fep->tx_bd_base; |
| for (i = 0; i < TX_RING_SIZE; i++) { |
| fep->tx_bounce[i] = kmalloc(FEC_ENET_TX_FRSIZE, GFP_KERNEL); |
| |
| bdp->cbd_sc = 0; |
| bdp->cbd_bufaddr = 0; |
| |
| if (fep->bufdesc_ex) { |
| struct bufdesc_ex *ebdp = (struct bufdesc_ex *)bdp; |
| ebdp->cbd_esc = BD_ENET_TX_INT; |
| } |
| |
| bdp = fec_enet_get_nextdesc(bdp, fep->bufdesc_ex); |
| } |
| |
| /* Set the last buffer to wrap. */ |
| bdp = fec_enet_get_prevdesc(bdp, fep->bufdesc_ex); |
| bdp->cbd_sc |= BD_SC_WRAP; |
| |
| return 0; |
| } |
| |
| static int |
| fec_enet_open(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| int ret; |
| |
| napi_enable(&fep->napi); |
| |
| /* I should reset the ring buffers here, but I don't yet know |
| * a simple way to do that. |
| */ |
| |
| ret = fec_enet_alloc_buffers(ndev); |
| if (ret) |
| return ret; |
| |
| /* Probe and connect to PHY when open the interface */ |
| ret = fec_enet_mii_probe(ndev); |
| if (ret) { |
| fec_enet_free_buffers(ndev); |
| return ret; |
| } |
| phy_start(fep->phy_dev); |
| netif_start_queue(ndev); |
| fep->opened = 1; |
| return 0; |
| } |
| |
| static int |
| fec_enet_close(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| /* Don't know what to do yet. */ |
| napi_disable(&fep->napi); |
| fep->opened = 0; |
| netif_stop_queue(ndev); |
| fec_stop(ndev); |
| |
| if (fep->phy_dev) { |
| phy_stop(fep->phy_dev); |
| phy_disconnect(fep->phy_dev); |
| } |
| |
| fec_enet_free_buffers(ndev); |
| |
| return 0; |
| } |
| |
| /* Set or clear the multicast filter for this adaptor. |
| * Skeleton taken from sunlance driver. |
| * The CPM Ethernet implementation allows Multicast as well as individual |
| * MAC address filtering. Some of the drivers check to make sure it is |
| * a group multicast address, and discard those that are not. I guess I |
| * will do the same for now, but just remove the test if you want |
| * individual filtering as well (do the upper net layers want or support |
| * this kind of feature?). |
| */ |
| |
| #define HASH_BITS 6 /* #bits in hash */ |
| #define CRC32_POLY 0xEDB88320 |
| |
| static void set_multicast_list(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct netdev_hw_addr *ha; |
| unsigned int i, bit, data, crc, tmp; |
| unsigned char hash; |
| |
| if (ndev->flags & IFF_PROMISC) { |
| tmp = readl(fep->hwp + FEC_R_CNTRL); |
| tmp |= 0x8; |
| writel(tmp, fep->hwp + FEC_R_CNTRL); |
| return; |
| } |
| |
| tmp = readl(fep->hwp + FEC_R_CNTRL); |
| tmp &= ~0x8; |
| writel(tmp, fep->hwp + FEC_R_CNTRL); |
| |
| if (ndev->flags & IFF_ALLMULTI) { |
| /* Catch all multicast addresses, so set the |
| * filter to all 1's |
| */ |
| writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); |
| writel(0xffffffff, fep->hwp + FEC_GRP_HASH_TABLE_LOW); |
| |
| return; |
| } |
| |
| /* Clear filter and add the addresses in hash register |
| */ |
| writel(0, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); |
| writel(0, fep->hwp + FEC_GRP_HASH_TABLE_LOW); |
| |
| netdev_for_each_mc_addr(ha, ndev) { |
| /* calculate crc32 value of mac address */ |
| crc = 0xffffffff; |
| |
| for (i = 0; i < ndev->addr_len; i++) { |
| data = ha->addr[i]; |
| for (bit = 0; bit < 8; bit++, data >>= 1) { |
| crc = (crc >> 1) ^ |
| (((crc ^ data) & 1) ? CRC32_POLY : 0); |
| } |
| } |
| |
| /* only upper 6 bits (HASH_BITS) are used |
| * which point to specific bit in he hash registers |
| */ |
| hash = (crc >> (32 - HASH_BITS)) & 0x3f; |
| |
| if (hash > 31) { |
| tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_HIGH); |
| tmp |= 1 << (hash - 32); |
| writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_HIGH); |
| } else { |
| tmp = readl(fep->hwp + FEC_GRP_HASH_TABLE_LOW); |
| tmp |= 1 << hash; |
| writel(tmp, fep->hwp + FEC_GRP_HASH_TABLE_LOW); |
| } |
| } |
| } |
| |
| /* Set a MAC change in hardware. */ |
| static int |
| fec_set_mac_address(struct net_device *ndev, void *p) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); |
| |
| writel(ndev->dev_addr[3] | (ndev->dev_addr[2] << 8) | |
| (ndev->dev_addr[1] << 16) | (ndev->dev_addr[0] << 24), |
| fep->hwp + FEC_ADDR_LOW); |
| writel((ndev->dev_addr[5] << 16) | (ndev->dev_addr[4] << 24), |
| fep->hwp + FEC_ADDR_HIGH); |
| return 0; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /** |
| * fec_poll_controller - FEC Poll controller function |
| * @dev: The FEC network adapter |
| * |
| * Polled functionality used by netconsole and others in non interrupt mode |
| * |
| */ |
| static void fec_poll_controller(struct net_device *dev) |
| { |
| int i; |
| struct fec_enet_private *fep = netdev_priv(dev); |
| |
| for (i = 0; i < FEC_IRQ_NUM; i++) { |
| if (fep->irq[i] > 0) { |
| disable_irq(fep->irq[i]); |
| fec_enet_interrupt(fep->irq[i], dev); |
| enable_irq(fep->irq[i]); |
| } |
| } |
| } |
| #endif |
| |
| static int fec_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct fec_enet_private *fep = netdev_priv(netdev); |
| netdev_features_t changed = features ^ netdev->features; |
| |
| netdev->features = features; |
| |
| /* Receive checksum has been changed */ |
| if (changed & NETIF_F_RXCSUM) { |
| if (features & NETIF_F_RXCSUM) |
| fep->csum_flags |= FLAG_RX_CSUM_ENABLED; |
| else |
| fep->csum_flags &= ~FLAG_RX_CSUM_ENABLED; |
| |
| if (netif_running(netdev)) { |
| fec_stop(netdev); |
| fec_restart(netdev, fep->phy_dev->duplex); |
| netif_wake_queue(netdev); |
| } else { |
| fec_restart(netdev, fep->phy_dev->duplex); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops fec_netdev_ops = { |
| .ndo_open = fec_enet_open, |
| .ndo_stop = fec_enet_close, |
| .ndo_start_xmit = fec_enet_start_xmit, |
| .ndo_set_rx_mode = set_multicast_list, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_tx_timeout = fec_timeout, |
| .ndo_set_mac_address = fec_set_mac_address, |
| .ndo_do_ioctl = fec_enet_ioctl, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = fec_poll_controller, |
| #endif |
| .ndo_set_features = fec_set_features, |
| }; |
| |
| /* |
| * XXX: We need to clean up on failure exits here. |
| * |
| */ |
| static int fec_enet_init(struct net_device *ndev) |
| { |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| const struct platform_device_id *id_entry = |
| platform_get_device_id(fep->pdev); |
| struct bufdesc *cbd_base; |
| |
| /* Allocate memory for buffer descriptors. */ |
| cbd_base = dma_alloc_coherent(NULL, PAGE_SIZE, &fep->bd_dma, |
| GFP_KERNEL); |
| if (!cbd_base) |
| return -ENOMEM; |
| |
| memset(cbd_base, 0, PAGE_SIZE); |
| |
| fep->netdev = ndev; |
| |
| /* Get the Ethernet address */ |
| fec_get_mac(ndev); |
| |
| /* Set receive and transmit descriptor base. */ |
| fep->rx_bd_base = cbd_base; |
| if (fep->bufdesc_ex) |
| fep->tx_bd_base = (struct bufdesc *) |
| (((struct bufdesc_ex *)cbd_base) + RX_RING_SIZE); |
| else |
| fep->tx_bd_base = cbd_base + RX_RING_SIZE; |
| |
| /* The FEC Ethernet specific entries in the device structure */ |
| ndev->watchdog_timeo = TX_TIMEOUT; |
| ndev->netdev_ops = &fec_netdev_ops; |
| ndev->ethtool_ops = &fec_enet_ethtool_ops; |
| |
| writel(FEC_RX_DISABLED_IMASK, fep->hwp + FEC_IMASK); |
| netif_napi_add(ndev, &fep->napi, fec_enet_rx_napi, FEC_NAPI_WEIGHT); |
| |
| if (id_entry->driver_data & FEC_QUIRK_HAS_VLAN) { |
| /* enable hw VLAN support */ |
| ndev->features |= NETIF_F_HW_VLAN_CTAG_RX; |
| ndev->hw_features |= NETIF_F_HW_VLAN_CTAG_RX; |
| } |
| |
| if (id_entry->driver_data & FEC_QUIRK_HAS_CSUM) { |
| /* enable hw accelerator */ |
| ndev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
| | NETIF_F_RXCSUM); |
| ndev->hw_features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
| | NETIF_F_RXCSUM); |
| fep->csum_flags |= FLAG_RX_CSUM_ENABLED; |
| } |
| |
| fec_restart(ndev, 0); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static void fec_reset_phy(struct platform_device *pdev) |
| { |
| int err, phy_reset; |
| int msec = 1; |
| struct device_node *np = pdev->dev.of_node; |
| |
| if (!np) |
| return; |
| |
| of_property_read_u32(np, "phy-reset-duration", &msec); |
| /* A sane reset duration should not be longer than 1s */ |
| if (msec > 1000) |
| msec = 1; |
| |
| phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); |
| if (!gpio_is_valid(phy_reset)) |
| return; |
| |
| err = devm_gpio_request_one(&pdev->dev, phy_reset, |
| GPIOF_OUT_INIT_LOW, "phy-reset"); |
| if (err) { |
| dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); |
| return; |
| } |
| msleep(msec); |
| gpio_set_value(phy_reset, 1); |
| } |
| #else /* CONFIG_OF */ |
| static void fec_reset_phy(struct platform_device *pdev) |
| { |
| /* |
| * In case of platform probe, the reset has been done |
| * by machine code. |
| */ |
| } |
| #endif /* CONFIG_OF */ |
| |
| static int |
| fec_probe(struct platform_device *pdev) |
| { |
| struct fec_enet_private *fep; |
| struct fec_platform_data *pdata; |
| struct net_device *ndev; |
| int i, irq, ret = 0; |
| struct resource *r; |
| const struct of_device_id *of_id; |
| static int dev_id; |
| |
| of_id = of_match_device(fec_dt_ids, &pdev->dev); |
| if (of_id) |
| pdev->id_entry = of_id->data; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!r) |
| return -ENXIO; |
| |
| /* Init network device */ |
| ndev = alloc_etherdev(sizeof(struct fec_enet_private)); |
| if (!ndev) |
| return -ENOMEM; |
| |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| |
| /* setup board info structure */ |
| fep = netdev_priv(ndev); |
| |
| #if !defined(CONFIG_M5272) |
| /* default enable pause frame auto negotiation */ |
| if (pdev->id_entry && |
| (pdev->id_entry->driver_data & FEC_QUIRK_HAS_GBIT)) |
| fep->pause_flag |= FEC_PAUSE_FLAG_AUTONEG; |
| #endif |
| |
| fep->hwp = devm_ioremap_resource(&pdev->dev, r); |
| if (IS_ERR(fep->hwp)) { |
| ret = PTR_ERR(fep->hwp); |
| goto failed_ioremap; |
| } |
| |
| fep->pdev = pdev; |
| fep->dev_id = dev_id++; |
| |
| fep->bufdesc_ex = 0; |
| |
| platform_set_drvdata(pdev, ndev); |
| |
| ret = of_get_phy_mode(pdev->dev.of_node); |
| if (ret < 0) { |
| pdata = pdev->dev.platform_data; |
| if (pdata) |
| fep->phy_interface = pdata->phy; |
| else |
| fep->phy_interface = PHY_INTERFACE_MODE_MII; |
| } else { |
| fep->phy_interface = ret; |
| } |
| |
| fep->clk_ipg = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(fep->clk_ipg)) { |
| ret = PTR_ERR(fep->clk_ipg); |
| goto failed_clk; |
| } |
| |
| fep->clk_ahb = devm_clk_get(&pdev->dev, "ahb"); |
| if (IS_ERR(fep->clk_ahb)) { |
| ret = PTR_ERR(fep->clk_ahb); |
| goto failed_clk; |
| } |
| |
| /* enet_out is optional, depends on board */ |
| fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out"); |
| if (IS_ERR(fep->clk_enet_out)) |
| fep->clk_enet_out = NULL; |
| |
| fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp"); |
| fep->bufdesc_ex = |
| pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX; |
| if (IS_ERR(fep->clk_ptp)) { |
| fep->clk_ptp = NULL; |
| fep->bufdesc_ex = 0; |
| } |
| |
| clk_prepare_enable(fep->clk_ahb); |
| clk_prepare_enable(fep->clk_ipg); |
| clk_prepare_enable(fep->clk_enet_out); |
| clk_prepare_enable(fep->clk_ptp); |
| |
| fep->reg_phy = devm_regulator_get(&pdev->dev, "phy"); |
| if (!IS_ERR(fep->reg_phy)) { |
| ret = regulator_enable(fep->reg_phy); |
| if (ret) { |
| dev_err(&pdev->dev, |
| "Failed to enable phy regulator: %d\n", ret); |
| goto failed_regulator; |
| } |
| } else { |
| fep->reg_phy = NULL; |
| } |
| |
| fec_reset_phy(pdev); |
| |
| if (fep->bufdesc_ex) |
| fec_ptp_init(pdev); |
| |
| ret = fec_enet_init(ndev); |
| if (ret) |
| goto failed_init; |
| |
| for (i = 0; i < FEC_IRQ_NUM; i++) { |
| irq = platform_get_irq(pdev, i); |
| if (irq < 0) { |
| if (i) |
| break; |
| ret = irq; |
| goto failed_irq; |
| } |
| ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev); |
| if (ret) { |
| while (--i >= 0) { |
| irq = platform_get_irq(pdev, i); |
| free_irq(irq, ndev); |
| } |
| goto failed_irq; |
| } |
| } |
| |
| ret = fec_enet_mii_init(pdev); |
| if (ret) |
| goto failed_mii_init; |
| |
| /* Carrier starts down, phylib will bring it up */ |
| netif_carrier_off(ndev); |
| |
| ret = register_netdev(ndev); |
| if (ret) |
| goto failed_register; |
| |
| if (fep->bufdesc_ex && fep->ptp_clock) |
| netdev_info(ndev, "registered PHC device %d\n", fep->dev_id); |
| |
| INIT_DELAYED_WORK(&(fep->delay_work.delay_work), fec_enet_work); |
| return 0; |
| |
| failed_register: |
| fec_enet_mii_remove(fep); |
| failed_mii_init: |
| failed_irq: |
| for (i = 0; i < FEC_IRQ_NUM; i++) { |
| irq = platform_get_irq(pdev, i); |
| if (irq > 0) |
| free_irq(irq, ndev); |
| } |
| failed_init: |
| if (fep->reg_phy) |
| regulator_disable(fep->reg_phy); |
| failed_regulator: |
| clk_disable_unprepare(fep->clk_ahb); |
| clk_disable_unprepare(fep->clk_ipg); |
| clk_disable_unprepare(fep->clk_enet_out); |
| clk_disable_unprepare(fep->clk_ptp); |
| failed_clk: |
| failed_ioremap: |
| free_netdev(ndev); |
| |
| return ret; |
| } |
| |
| static int |
| fec_drv_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| int i; |
| |
| cancel_delayed_work_sync(&(fep->delay_work.delay_work)); |
| unregister_netdev(ndev); |
| fec_enet_mii_remove(fep); |
| del_timer_sync(&fep->time_keep); |
| for (i = 0; i < FEC_IRQ_NUM; i++) { |
| int irq = platform_get_irq(pdev, i); |
| if (irq > 0) |
| free_irq(irq, ndev); |
| } |
| if (fep->reg_phy) |
| regulator_disable(fep->reg_phy); |
| clk_disable_unprepare(fep->clk_ptp); |
| if (fep->ptp_clock) |
| ptp_clock_unregister(fep->ptp_clock); |
| clk_disable_unprepare(fep->clk_enet_out); |
| clk_disable_unprepare(fep->clk_ahb); |
| clk_disable_unprepare(fep->clk_ipg); |
| free_netdev(ndev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int |
| fec_suspend(struct device *dev) |
| { |
| struct net_device *ndev = dev_get_drvdata(dev); |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| |
| if (netif_running(ndev)) { |
| fec_stop(ndev); |
| netif_device_detach(ndev); |
| } |
| clk_disable_unprepare(fep->clk_enet_out); |
| clk_disable_unprepare(fep->clk_ahb); |
| clk_disable_unprepare(fep->clk_ipg); |
| |
| if (fep->reg_phy) |
| regulator_disable(fep->reg_phy); |
| |
| return 0; |
| } |
| |
| static int |
| fec_resume(struct device *dev) |
| { |
| struct net_device *ndev = dev_get_drvdata(dev); |
| struct fec_enet_private *fep = netdev_priv(ndev); |
| int ret; |
| |
| if (fep->reg_phy) { |
| ret = regulator_enable(fep->reg_phy); |
| if (ret) |
| return ret; |
| } |
| |
| clk_prepare_enable(fep->clk_enet_out); |
| clk_prepare_enable(fep->clk_ahb); |
| clk_prepare_enable(fep->clk_ipg); |
| if (netif_running(ndev)) { |
| fec_restart(ndev, fep->full_duplex); |
| netif_device_attach(ndev); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(fec_pm_ops, fec_suspend, fec_resume); |
| |
| static struct platform_driver fec_driver = { |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .pm = &fec_pm_ops, |
| .of_match_table = fec_dt_ids, |
| }, |
| .id_table = fec_devtype, |
| .probe = fec_probe, |
| .remove = fec_drv_remove, |
| }; |
| |
| module_platform_driver(fec_driver); |
| |
| MODULE_LICENSE("GPL"); |