include/linux/jiffies.h - kernel/msm-4.9 - Gitiles

 #ifndef _LINUX_JIFFIES_H
 #define _LINUX_JIFFIES_H

 #include <linux/calc64.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <asm/param.h>			/* for HZ */

 /*
  * The following defines establish the engineering parameters of the PLL
  * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
  * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
  * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
  * nearest power of two in order to avoid hardware multiply operations.
  */
 #if HZ >= 12 && HZ < 24
 # define SHIFT_HZ	4
 #elif HZ >= 24 && HZ < 48
 # define SHIFT_HZ	5
 #elif HZ >= 48 && HZ < 96
 # define SHIFT_HZ	6
 #elif HZ >= 96 && HZ < 192
 # define SHIFT_HZ	7
 #elif HZ >= 192 && HZ < 384
 # define SHIFT_HZ	8
 #elif HZ >= 384 && HZ < 768
 # define SHIFT_HZ	9
 #elif HZ >= 768 && HZ < 1536
 # define SHIFT_HZ	10
 #else
 # error You lose.
 #endif

 /* LATCH is used in the interval timer and ftape setup. */
 #define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)	/* For divider */

 #define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ)

 /* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
  * improve accuracy by shifting LSH bits, hence calculating:
  *     (NOM << LSH) / DEN
  * This however means trouble for large NOM, because (NOM << LSH) may no
  * longer fit in 32 bits. The following way of calculating this gives us
  * some slack, under the following conditions:
  *   - (NOM / DEN) fits in (32 - LSH) bits.
  *   - (NOM % DEN) fits in (32 - LSH) bits.
  */
 #define SH_DIV(NOM,DEN,LSH) (   (((NOM) / (DEN)) << (LSH))              \
                              + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))

 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))

 #define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8))

 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))

 #define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8))

 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)

 /* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and	*/
 /* a value TUSEC for TICK_USEC (can be set bij adjtimex)		*/
 #define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))

 /* some arch's have a small-data section that can be accessed register-relative
  * but that can only take up to, say, 4-byte variables. jiffies being part of
  * an 8-byte variable may not be correctly accessed unless we force the issue
  */
 #define __jiffy_data  __attribute__((section(".data")))

 /*
  * The 64-bit value is not volatile - you MUST NOT read it
  * without sampling the sequence number in xtime_lock.
  * get_jiffies_64() will do this for you as appropriate.
  */
 extern u64 __jiffy_data jiffies_64;
 extern unsigned long volatile __jiffy_data jiffies;

 #if (BITS_PER_LONG < 64)
 u64 get_jiffies_64(void);
 #else
 static inline u64 get_jiffies_64(void)
 {
 	return (u64)jiffies;
 }
 #endif

 /*
  *	These inlines deal with timer wrapping correctly. You are
  *	strongly encouraged to use them
  *	1. Because people otherwise forget
  *	2. Because if the timer wrap changes in future you won't have to
  *	   alter your driver code.
  *
  * time_after(a,b) returns true if the time a is after time b.
  *
  * Do this with "<0" and ">=0" to only test the sign of the result. A
  * good compiler would generate better code (and a really good compiler
  * wouldn't care). Gcc is currently neither.
  */
 #define time_after(a,b)		\
 	(typecheck(unsigned long, a) && \
 	 typecheck(unsigned long, b) && \
 	 ((long)(b) - (long)(a) < 0))
 #define time_before(a,b)	time_after(b,a)

 #define time_after_eq(a,b)	\
 	(typecheck(unsigned long, a) && \
 	 typecheck(unsigned long, b) && \
 	 ((long)(a) - (long)(b) >= 0))
 #define time_before_eq(a,b)	time_after_eq(b,a)

 /* Same as above, but does so with platform independent 64bit types.
  * These must be used when utilizing jiffies_64 (i.e. return value of
  * get_jiffies_64() */
 #define time_after64(a,b)	\
 	(typecheck(__u64, a) &&	\
 	 typecheck(__u64, b) && \
 	 ((__s64)(b) - (__s64)(a) < 0))
 #define time_before64(a,b)	time_after64(b,a)

 #define time_after_eq64(a,b)	\
 	(typecheck(__u64, a) && \
 	 typecheck(__u64, b) && \
 	 ((__s64)(a) - (__s64)(b) >= 0))
 #define time_before_eq64(a,b)	time_after_eq64(b,a)

 /*
  * Have the 32 bit jiffies value wrap 5 minutes after boot
  * so jiffies wrap bugs show up earlier.
  */
 #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))

 /*
  * Change timeval to jiffies, trying to avoid the
  * most obvious overflows..
  *
  * And some not so obvious.
  *
  * Note that we don't want to return MAX_LONG, because
  * for various timeout reasons we often end up having
  * to wait "jiffies+1" in order to guarantee that we wait
  * at _least_ "jiffies" - so "jiffies+1" had better still
  * be positive.
  */
 #define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)

 /*
  * We want to do realistic conversions of time so we need to use the same
  * values the update wall clock code uses as the jiffies size.  This value
  * is: TICK_NSEC (which is defined in timex.h).  This
  * is a constant and is in nanoseconds.  We will used scaled math
  * with a set of scales defined here as SEC_JIFFIE_SC,  USEC_JIFFIE_SC and
  * NSEC_JIFFIE_SC.  Note that these defines contain nothing but
  * constants and so are computed at compile time.  SHIFT_HZ (computed in
  * timex.h) adjusts the scaling for different HZ values.

  * Scaled math???  What is that?
  *
  * Scaled math is a way to do integer math on values that would,
  * otherwise, either overflow, underflow, or cause undesired div
  * instructions to appear in the execution path.  In short, we "scale"
  * up the operands so they take more bits (more precision, less
  * underflow), do the desired operation and then "scale" the result back
  * by the same amount.  If we do the scaling by shifting we avoid the
  * costly mpy and the dastardly div instructions.

  * Suppose, for example, we want to convert from seconds to jiffies
  * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE.  The
  * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
  * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
  * might calculate at compile time, however, the result will only have
  * about 3-4 bits of precision (less for smaller values of HZ).
  *
  * So, we scale as follows:
  * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
  * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
  * Then we make SCALE a power of two so:
  * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
  * Now we define:
  * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
  * jiff = (sec * SEC_CONV) >> SCALE;
  *
  * Often the math we use will expand beyond 32-bits so we tell C how to
  * do this and pass the 64-bit result of the mpy through the ">> SCALE"
  * which should take the result back to 32-bits.  We want this expansion
  * to capture as much precision as possible.  At the same time we don't
  * want to overflow so we pick the SCALE to avoid this.  In this file,
  * that means using a different scale for each range of HZ values (as
  * defined in timex.h).
  *
  * For those who want to know, gcc will give a 64-bit result from a "*"
  * operator if the result is a long long AND at least one of the
  * operands is cast to long long (usually just prior to the "*" so as
  * not to confuse it into thinking it really has a 64-bit operand,
  * which, buy the way, it can do, but it take more code and at least 2
  * mpys).

  * We also need to be aware that one second in nanoseconds is only a
  * couple of bits away from overflowing a 32-bit word, so we MUST use
  * 64-bits to get the full range time in nanoseconds.

  */

 /*
  * Here are the scales we will use.  One for seconds, nanoseconds and
  * microseconds.
  *
  * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
  * check if the sign bit is set.  If not, we bump the shift count by 1.
  * (Gets an extra bit of precision where we can use it.)
  * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
  * Haven't tested others.

  * Limits of cpp (for #if expressions) only long (no long long), but
  * then we only need the most signicant bit.
  */

 #define SEC_JIFFIE_SC (31 - SHIFT_HZ)
 #if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
 #undef SEC_JIFFIE_SC
 #define SEC_JIFFIE_SC (32 - SHIFT_HZ)
 #endif
 #define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
 #define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
 #define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
                                 TICK_NSEC -1) / (u64)TICK_NSEC))

 #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
                                         TICK_NSEC -1) / (u64)TICK_NSEC))
 #define USEC_CONVERSION  \
                     ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
                                         TICK_NSEC -1) / (u64)TICK_NSEC))
 /*
  * USEC_ROUND is used in the timeval to jiffie conversion.  See there
  * for more details.  It is the scaled resolution rounding value.  Note
  * that it is a 64-bit value.  Since, when it is applied, we are already
  * in jiffies (albit scaled), it is nothing but the bits we will shift
  * off.
  */
 #define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
 /*
  * The maximum jiffie value is (MAX_INT >> 1).  Here we translate that
  * into seconds.  The 64-bit case will overflow if we are not careful,
  * so use the messy SH_DIV macro to do it.  Still all constants.
  */
 #if BITS_PER_LONG < 64
 # define MAX_SEC_IN_JIFFIES \
 	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
 #else	/* take care of overflow on 64 bits machines */
 # define MAX_SEC_IN_JIFFIES \
 	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)

 #endif

 /*
  * Convert jiffies to milliseconds and back.
  *
  * Avoid unnecessary multiplications/divisions in the
  * two most common HZ cases:
  */
 static inline unsigned int jiffies_to_msecs(const unsigned long j)
 {
 #if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
 	return (MSEC_PER_SEC / HZ) * j;
 #elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
 	return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
 #else
 	return (j * MSEC_PER_SEC) / HZ;
 #endif
 }

 static inline unsigned int jiffies_to_usecs(const unsigned long j)
 {
 #if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
 	return (USEC_PER_SEC / HZ) * j;
 #elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
 	return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
 #else
 	return (j * USEC_PER_SEC) / HZ;
 #endif
 }

 static inline unsigned long msecs_to_jiffies(const unsigned int m)
 {
 	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
 		return MAX_JIFFY_OFFSET;
 #if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
 	return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
 #elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
 	return m * (HZ / MSEC_PER_SEC);
 #else
 	return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
 #endif
 }

 static inline unsigned long usecs_to_jiffies(const unsigned int u)
 {
 	if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
 		return MAX_JIFFY_OFFSET;
 #if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
 	return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
 #elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
 	return u * (HZ / USEC_PER_SEC);
 #else
 	return (u * HZ + USEC_PER_SEC - 1) / USEC_PER_SEC;
 #endif
 }

 /*
  * The TICK_NSEC - 1 rounds up the value to the next resolution.  Note
  * that a remainder subtract here would not do the right thing as the
  * resolution values don't fall on second boundries.  I.e. the line:
  * nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
  *
  * Rather, we just shift the bits off the right.
  *
  * The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
  * value to a scaled second value.
  */
 static __inline__ unsigned long
 timespec_to_jiffies(const struct timespec *value)
 {
 	unsigned long sec = value->tv_sec;
 	long nsec = value->tv_nsec + TICK_NSEC - 1;

 	if (sec >= MAX_SEC_IN_JIFFIES){
 		sec = MAX_SEC_IN_JIFFIES;
 		nsec = 0;
 	}
 	return (((u64)sec * SEC_CONVERSION) +
 		(((u64)nsec * NSEC_CONVERSION) >>
 		 (NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;

 }

 static __inline__ void
 jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
 {
 	/*
 	 * Convert jiffies to nanoseconds and separate with
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;
 	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
 }

 /* Same for "timeval"
  *
  * Well, almost.  The problem here is that the real system resolution is
  * in nanoseconds and the value being converted is in micro seconds.
  * Also for some machines (those that use HZ = 1024, in-particular),
  * there is a LARGE error in the tick size in microseconds.

  * The solution we use is to do the rounding AFTER we convert the
  * microsecond part.  Thus the USEC_ROUND, the bits to be shifted off.
  * Instruction wise, this should cost only an additional add with carry
  * instruction above the way it was done above.
  */
 static __inline__ unsigned long
 timeval_to_jiffies(const struct timeval *value)
 {
 	unsigned long sec = value->tv_sec;
 	long usec = value->tv_usec;

 	if (sec >= MAX_SEC_IN_JIFFIES){
 		sec = MAX_SEC_IN_JIFFIES;
 		usec = 0;
 	}
 	return (((u64)sec * SEC_CONVERSION) +
 		(((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
 		 (USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
 }

 static __inline__ void
 jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
 {
 	/*
 	 * Convert jiffies to nanoseconds and separate with
 	 * one divide.
 	 */
 	u64 nsec = (u64)jiffies * TICK_NSEC;
 	long tv_usec;

 	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
 	tv_usec /= NSEC_PER_USEC;
 	value->tv_usec = tv_usec;
 }

 /*
  * Convert jiffies/jiffies_64 to clock_t and back.
  */
 static inline clock_t jiffies_to_clock_t(long x)
 {
 #if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
 	return x / (HZ / USER_HZ);
 #else
 	u64 tmp = (u64)x * TICK_NSEC;
 	do_div(tmp, (NSEC_PER_SEC / USER_HZ));
 	return (long)tmp;
 #endif
 }

 static inline unsigned long clock_t_to_jiffies(unsigned long x)
 {
 #if (HZ % USER_HZ)==0
 	if (x >= ~0UL / (HZ / USER_HZ))
 		return ~0UL;
 	return x * (HZ / USER_HZ);
 #else
 	u64 jif;

 	/* Don't worry about loss of precision here .. */
 	if (x >= ~0UL / HZ * USER_HZ)
 		return ~0UL;

 	/* .. but do try to contain it here */
 	jif = x * (u64) HZ;
 	do_div(jif, USER_HZ);
 	return jif;
 #endif
 }

 static inline u64 jiffies_64_to_clock_t(u64 x)
 {
 #if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
 	do_div(x, HZ / USER_HZ);
 #else
 	/*
 	 * There are better ways that don't overflow early,
 	 * but even this doesn't overflow in hundreds of years
 	 * in 64 bits, so..
 	 */
 	x *= TICK_NSEC;
 	do_div(x, (NSEC_PER_SEC / USER_HZ));
 #endif
 	return x;
 }

 static inline u64 nsec_to_clock_t(u64 x)
 {
 #if (NSEC_PER_SEC % USER_HZ) == 0
 	do_div(x, (NSEC_PER_SEC / USER_HZ));
 #elif (USER_HZ % 512) == 0
 	x *= USER_HZ/512;
 	do_div(x, (NSEC_PER_SEC / 512));
 #else
 	/*
          * max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
          * overflow after 64.99 years.
          * exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
          */
 	x *= 9;
 	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2))
 	                          / USER_HZ));
 #endif
 	return x;
 }

 #endif
	#ifndef _LINUX_JIFFIES_H
	#define _LINUX_JIFFIES_H

	#include <linux/calc64.h>
	#include <linux/kernel.h>
	#include <linux/types.h>
	#include <linux/time.h>
	#include <linux/timex.h>
	#include <asm/param.h> /* for HZ */

	/*
	* The following defines establish the engineering parameters of the PLL
	* model. The HZ variable establishes the timer interrupt frequency, 100 Hz
	* for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
	* OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
	* nearest power of two in order to avoid hardware multiply operations.
	*/
	#if HZ >= 12 && HZ < 24
	# define SHIFT_HZ 4
	#elif HZ >= 24 && HZ < 48
	# define SHIFT_HZ 5
	#elif HZ >= 48 && HZ < 96
	# define SHIFT_HZ 6
	#elif HZ >= 96 && HZ < 192
	# define SHIFT_HZ 7
	#elif HZ >= 192 && HZ < 384
	# define SHIFT_HZ 8
	#elif HZ >= 384 && HZ < 768
	# define SHIFT_HZ 9
	#elif HZ >= 768 && HZ < 1536
	# define SHIFT_HZ 10
	#else
	# error You lose.
	#endif

	/* LATCH is used in the interval timer and ftape setup. */
	#define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */

	#define LATCH_HPET ((HPET_TICK_RATE + HZ/2) / HZ)

	/* Suppose we want to devide two numbers NOM and DEN: NOM/DEN, the we can
	* improve accuracy by shifting LSH bits, hence calculating:
	* (NOM << LSH) / DEN
	* This however means trouble for large NOM, because (NOM << LSH) may no
	* longer fit in 32 bits. The following way of calculating this gives us
	* some slack, under the following conditions:
	* - (NOM / DEN) fits in (32 - LSH) bits.
	* - (NOM % DEN) fits in (32 - LSH) bits.
	*/
	#define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \
	+ ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))

	/* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
	#define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))

	#define ACTHZ_HPET (SH_DIV (HPET_TICK_RATE, LATCH_HPET, 8))

	/* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
	#define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))

	#define TICK_NSEC_HPET (SH_DIV(1000000UL * 1000, ACTHZ_HPET, 8))

	/* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
	#define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)

	/* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and */
	/* a value TUSEC for TICK_USEC (can be set bij adjtimex) */
	#define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))

	/* some arch's have a small-data section that can be accessed register-relative
	* but that can only take up to, say, 4-byte variables. jiffies being part of
	* an 8-byte variable may not be correctly accessed unless we force the issue
	*/
	#define __jiffy_data __attribute__((section(".data")))

	/*
	* The 64-bit value is not volatile - you MUST NOT read it
	* without sampling the sequence number in xtime_lock.
	* get_jiffies_64() will do this for you as appropriate.
	*/
	extern u64 __jiffy_data jiffies_64;
	extern unsigned long volatile __jiffy_data jiffies;

	#if (BITS_PER_LONG < 64)
	u64 get_jiffies_64(void);
	#else
	static inline u64 get_jiffies_64(void)
	{
	return (u64)jiffies;
	}
	#endif

	/*
	* These inlines deal with timer wrapping correctly. You are
	* strongly encouraged to use them
	* 1. Because people otherwise forget
	* 2. Because if the timer wrap changes in future you won't have to
	* alter your driver code.
	*
	* time_after(a,b) returns true if the time a is after time b.
	*
	* Do this with "<0" and ">=0" to only test the sign of the result. A
	* good compiler would generate better code (and a really good compiler
	* wouldn't care). Gcc is currently neither.
	*/
	#define time_after(a,b) \
	(typecheck(unsigned long, a) && \
	typecheck(unsigned long, b) && \
	((long)(b) - (long)(a) < 0))
	#define time_before(a,b) time_after(b,a)

	#define time_after_eq(a,b) \
	(typecheck(unsigned long, a) && \
	typecheck(unsigned long, b) && \
	((long)(a) - (long)(b) >= 0))
	#define time_before_eq(a,b) time_after_eq(b,a)

	/* Same as above, but does so with platform independent 64bit types.
	* These must be used when utilizing jiffies_64 (i.e. return value of
	* get_jiffies_64() */
	#define time_after64(a,b) \
	(typecheck(__u64, a) && \
	typecheck(__u64, b) && \
	((__s64)(b) - (__s64)(a) < 0))
	#define time_before64(a,b) time_after64(b,a)

	#define time_after_eq64(a,b) \
	(typecheck(__u64, a) && \
	typecheck(__u64, b) && \
	((__s64)(a) - (__s64)(b) >= 0))
	#define time_before_eq64(a,b) time_after_eq64(b,a)

	/*
	* Have the 32 bit jiffies value wrap 5 minutes after boot
	* so jiffies wrap bugs show up earlier.
	*/
	#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))

	/*
	* Change timeval to jiffies, trying to avoid the
	* most obvious overflows..
	*
	* And some not so obvious.
	*
	* Note that we don't want to return MAX_LONG, because
	* for various timeout reasons we often end up having
	* to wait "jiffies+1" in order to guarantee that we wait
	* at _least_ "jiffies" - so "jiffies+1" had better still
	* be positive.
	*/
	#define MAX_JIFFY_OFFSET ((~0UL >> 1)-1)

	/*
	* We want to do realistic conversions of time so we need to use the same
	* values the update wall clock code uses as the jiffies size. This value
	* is: TICK_NSEC (which is defined in timex.h). This
	* is a constant and is in nanoseconds. We will used scaled math
	* with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
	* NSEC_JIFFIE_SC. Note that these defines contain nothing but
	* constants and so are computed at compile time. SHIFT_HZ (computed in
	* timex.h) adjusts the scaling for different HZ values.

	* Scaled math??? What is that?
	*
	* Scaled math is a way to do integer math on values that would,
	* otherwise, either overflow, underflow, or cause undesired div
	* instructions to appear in the execution path. In short, we "scale"
	* up the operands so they take more bits (more precision, less
	* underflow), do the desired operation and then "scale" the result back
	* by the same amount. If we do the scaling by shifting we avoid the
	* costly mpy and the dastardly div instructions.

	* Suppose, for example, we want to convert from seconds to jiffies
	* where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE. The
	* simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
	* observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
	* might calculate at compile time, however, the result will only have
	* about 3-4 bits of precision (less for smaller values of HZ).
	*
	* So, we scale as follows:
	* jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
	* jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
	* Then we make SCALE a power of two so:
	* jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
	* Now we define:
	* #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
	* jiff = (sec * SEC_CONV) >> SCALE;
	*
	* Often the math we use will expand beyond 32-bits so we tell C how to
	* do this and pass the 64-bit result of the mpy through the ">> SCALE"
	* which should take the result back to 32-bits. We want this expansion
	* to capture as much precision as possible. At the same time we don't
	* want to overflow so we pick the SCALE to avoid this. In this file,
	* that means using a different scale for each range of HZ values (as
	* defined in timex.h).
	*
	* For those who want to know, gcc will give a 64-bit result from a "*"
	* operator if the result is a long long AND at least one of the
	* operands is cast to long long (usually just prior to the "*" so as
	* not to confuse it into thinking it really has a 64-bit operand,
	* which, buy the way, it can do, but it take more code and at least 2
	* mpys).

	* We also need to be aware that one second in nanoseconds is only a
	* couple of bits away from overflowing a 32-bit word, so we MUST use
	* 64-bits to get the full range time in nanoseconds.

	*/

	/*
	* Here are the scales we will use. One for seconds, nanoseconds and
	* microseconds.
	*
	* Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
	* check if the sign bit is set. If not, we bump the shift count by 1.
	* (Gets an extra bit of precision where we can use it.)
	* We know it is set for HZ = 1024 and HZ = 100 not for 1000.
	* Haven't tested others.

	* Limits of cpp (for #if expressions) only long (no long long), but
	* then we only need the most signicant bit.
	*/

	#define SEC_JIFFIE_SC (31 - SHIFT_HZ)
	#if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
	#undef SEC_JIFFIE_SC
	#define SEC_JIFFIE_SC (32 - SHIFT_HZ)
	#endif
	#define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
	#define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
	#define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
	TICK_NSEC -1) / (u64)TICK_NSEC))

	#define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
	TICK_NSEC -1) / (u64)TICK_NSEC))
	#define USEC_CONVERSION \
	((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
	TICK_NSEC -1) / (u64)TICK_NSEC))
	/*
	* USEC_ROUND is used in the timeval to jiffie conversion. See there
	* for more details. It is the scaled resolution rounding value. Note
	* that it is a 64-bit value. Since, when it is applied, we are already
	* in jiffies (albit scaled), it is nothing but the bits we will shift
	* off.
	*/
	#define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
	/*
	* The maximum jiffie value is (MAX_INT >> 1). Here we translate that
	* into seconds. The 64-bit case will overflow if we are not careful,
	* so use the messy SH_DIV macro to do it. Still all constants.
	*/
	#if BITS_PER_LONG < 64
	# define MAX_SEC_IN_JIFFIES \
	(long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
	#else /* take care of overflow on 64 bits machines */
	# define MAX_SEC_IN_JIFFIES \
	(SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)

	#endif

	/*
	* Convert jiffies to milliseconds and back.
	*
	* Avoid unnecessary multiplications/divisions in the
	* two most common HZ cases:
	*/
	static inline unsigned int jiffies_to_msecs(const unsigned long j)
	{
	#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
	return (MSEC_PER_SEC / HZ) * j;
	#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
	return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC);
	#else
	return (j * MSEC_PER_SEC) / HZ;
	#endif
	}

	static inline unsigned int jiffies_to_usecs(const unsigned long j)
	{
	#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
	return (USEC_PER_SEC / HZ) * j;
	#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
	return (j + (HZ / USEC_PER_SEC) - 1)/(HZ / USEC_PER_SEC);
	#else
	return (j * USEC_PER_SEC) / HZ;
	#endif
	}

	static inline unsigned long msecs_to_jiffies(const unsigned int m)
	{
	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
	return MAX_JIFFY_OFFSET;
	#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
	return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
	#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
	return m * (HZ / MSEC_PER_SEC);
	#else
	return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC;
	#endif
	}

	static inline unsigned long usecs_to_jiffies(const unsigned int u)
	{
	if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
	return MAX_JIFFY_OFFSET;
	#if HZ <= USEC_PER_SEC && !(USEC_PER_SEC % HZ)
	return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
	#elif HZ > USEC_PER_SEC && !(HZ % USEC_PER_SEC)
	return u * (HZ / USEC_PER_SEC);
	#else
	return (u * HZ + USEC_PER_SEC - 1) / USEC_PER_SEC;
	#endif
	}

	/*
	* The TICK_NSEC - 1 rounds up the value to the next resolution. Note
	* that a remainder subtract here would not do the right thing as the
	* resolution values don't fall on second boundries. I.e. the line:
	* nsec -= nsec % TICK_NSEC; is NOT a correct resolution rounding.
	*
	* Rather, we just shift the bits off the right.
	*
	* The >> (NSEC_JIFFIE_SC - SEC_JIFFIE_SC) converts the scaled nsec
	* value to a scaled second value.
	*/
	static __inline__ unsigned long
	timespec_to_jiffies(const struct timespec *value)
	{
	unsigned long sec = value->tv_sec;
	long nsec = value->tv_nsec + TICK_NSEC - 1;

	if (sec >= MAX_SEC_IN_JIFFIES){
	sec = MAX_SEC_IN_JIFFIES;
	nsec = 0;
	}
	return (((u64)sec * SEC_CONVERSION) +
	(((u64)nsec * NSEC_CONVERSION) >>
	(NSEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;

	}

	static __inline__ void
	jiffies_to_timespec(const unsigned long jiffies, struct timespec *value)
	{
	/*
	* Convert jiffies to nanoseconds and separate with
	* one divide.
	*/
	u64 nsec = (u64)jiffies * TICK_NSEC;
	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &value->tv_nsec);
	}

	/* Same for "timeval"
	*
	* Well, almost. The problem here is that the real system resolution is
	* in nanoseconds and the value being converted is in micro seconds.
	* Also for some machines (those that use HZ = 1024, in-particular),
	* there is a LARGE error in the tick size in microseconds.

	* The solution we use is to do the rounding AFTER we convert the
	* microsecond part. Thus the USEC_ROUND, the bits to be shifted off.
	* Instruction wise, this should cost only an additional add with carry
	* instruction above the way it was done above.
	*/
	static __inline__ unsigned long
	timeval_to_jiffies(const struct timeval *value)
	{
	unsigned long sec = value->tv_sec;
	long usec = value->tv_usec;

	if (sec >= MAX_SEC_IN_JIFFIES){
	sec = MAX_SEC_IN_JIFFIES;
	usec = 0;
	}
	return (((u64)sec * SEC_CONVERSION) +
	(((u64)usec * USEC_CONVERSION + USEC_ROUND) >>
	(USEC_JIFFIE_SC - SEC_JIFFIE_SC))) >> SEC_JIFFIE_SC;
	}

	static __inline__ void
	jiffies_to_timeval(const unsigned long jiffies, struct timeval *value)
	{
	/*
	* Convert jiffies to nanoseconds and separate with
	* one divide.
	*/
	u64 nsec = (u64)jiffies * TICK_NSEC;
	long tv_usec;

	value->tv_sec = div_long_long_rem(nsec, NSEC_PER_SEC, &tv_usec);
	tv_usec /= NSEC_PER_USEC;
	value->tv_usec = tv_usec;
	}

	/*
	* Convert jiffies/jiffies_64 to clock_t and back.
	*/
	static inline clock_t jiffies_to_clock_t(long x)
	{
	#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
	return x / (HZ / USER_HZ);
	#else
	u64 tmp = (u64)x * TICK_NSEC;
	do_div(tmp, (NSEC_PER_SEC / USER_HZ));
	return (long)tmp;
	#endif
	}

	static inline unsigned long clock_t_to_jiffies(unsigned long x)
	{
	#if (HZ % USER_HZ)==0
	if (x >= ~0UL / (HZ / USER_HZ))
	return ~0UL;
	return x * (HZ / USER_HZ);
	#else
	u64 jif;

	/* Don't worry about loss of precision here .. */
	if (x >= ~0UL / HZ * USER_HZ)
	return ~0UL;

	/* .. but do try to contain it here */
	jif = x * (u64) HZ;
	do_div(jif, USER_HZ);
	return jif;
	#endif
	}

	static inline u64 jiffies_64_to_clock_t(u64 x)
	{
	#if (TICK_NSEC % (NSEC_PER_SEC / USER_HZ)) == 0
	do_div(x, HZ / USER_HZ);
	#else
	/*
	* There are better ways that don't overflow early,
	* but even this doesn't overflow in hundreds of years
	* in 64 bits, so..
	*/
	x *= TICK_NSEC;
	do_div(x, (NSEC_PER_SEC / USER_HZ));
	#endif
	return x;
	}

	static inline u64 nsec_to_clock_t(u64 x)
	{
	#if (NSEC_PER_SEC % USER_HZ) == 0
	do_div(x, (NSEC_PER_SEC / USER_HZ));
	#elif (USER_HZ % 512) == 0
	x *= USER_HZ/512;
	do_div(x, (NSEC_PER_SEC / 512));
	#else
	/*
	* max relative error 5.7e-8 (1.8s per year) for USER_HZ <= 1024,
	* overflow after 64.99 years.
	* exact for HZ=60, 72, 90, 120, 144, 180, 300, 600, 900, ...
	*/
	x *= 9;
	do_div(x, (unsigned long)((9ull * NSEC_PER_SEC + (USER_HZ/2))
	/ USER_HZ));
	#endif
	return x;
	}

	#endif