| /* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c |
| * |
| * Copyright 2008 Openmoko, Inc. |
| * Copyright 2008 Simtec Electronics |
| * Ben Dooks <ben@simtec.co.uk> |
| * http://armlinux.simtec.co.uk/ |
| * |
| * S3C6400 based common clock support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/sysdev.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/map.h> |
| |
| #include <plat/cpu-freq.h> |
| |
| #include <plat/regs-clock.h> |
| #include <plat/clock.h> |
| #include <plat/cpu.h> |
| #include <plat/pll.h> |
| |
| /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call |
| * ext_xtal_mux for want of an actual name from the manual. |
| */ |
| |
| static struct clk clk_ext_xtal_mux = { |
| .name = "ext_xtal", |
| .id = -1, |
| }; |
| |
| #define clk_fin_apll clk_ext_xtal_mux |
| #define clk_fin_mpll clk_ext_xtal_mux |
| #define clk_fin_epll clk_ext_xtal_mux |
| |
| #define clk_fout_mpll clk_mpll |
| |
| struct clk_sources { |
| unsigned int nr_sources; |
| struct clk **sources; |
| }; |
| |
| struct clksrc_clk { |
| struct clk clk; |
| unsigned int mask; |
| unsigned int shift; |
| |
| struct clk_sources *sources; |
| |
| unsigned int divider_shift; |
| void __iomem *reg_divider; |
| }; |
| |
| static struct clk clk_fout_apll = { |
| .name = "fout_apll", |
| .id = -1, |
| }; |
| |
| static struct clk *clk_src_apll_list[] = { |
| [0] = &clk_fin_apll, |
| [1] = &clk_fout_apll, |
| }; |
| |
| static struct clk_sources clk_src_apll = { |
| .sources = clk_src_apll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_apll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_apll = { |
| .clk = { |
| .name = "mout_apll", |
| .id = -1, |
| }, |
| .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT, |
| .mask = S3C6400_CLKSRC_APLL_MOUT, |
| .sources = &clk_src_apll, |
| }; |
| |
| static struct clk clk_fout_epll = { |
| .name = "fout_epll", |
| .id = -1, |
| }; |
| |
| static struct clk *clk_src_epll_list[] = { |
| [0] = &clk_fin_epll, |
| [1] = &clk_fout_epll, |
| }; |
| |
| static struct clk_sources clk_src_epll = { |
| .sources = clk_src_epll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_epll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_epll = { |
| .clk = { |
| .name = "mout_epll", |
| .id = -1, |
| }, |
| .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT, |
| .mask = S3C6400_CLKSRC_EPLL_MOUT, |
| .sources = &clk_src_epll, |
| }; |
| |
| static struct clk *clk_src_mpll_list[] = { |
| [0] = &clk_fin_mpll, |
| [1] = &clk_fout_mpll, |
| }; |
| |
| static struct clk_sources clk_src_mpll = { |
| .sources = clk_src_mpll_list, |
| .nr_sources = ARRAY_SIZE(clk_src_mpll_list), |
| }; |
| |
| static struct clksrc_clk clk_mout_mpll = { |
| .clk = { |
| .name = "mout_mpll", |
| .id = -1, |
| }, |
| .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT, |
| .mask = S3C6400_CLKSRC_MPLL_MOUT, |
| .sources = &clk_src_mpll, |
| }; |
| |
| static unsigned int armclk_mask; |
| |
| static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk) |
| { |
| unsigned long rate = clk_get_rate(clk->parent); |
| u32 clkdiv; |
| |
| /* divisor mask starts at bit0, so no need to shift */ |
| clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask; |
| |
| return rate / (clkdiv + 1); |
| } |
| |
| static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk, |
| unsigned long rate) |
| { |
| unsigned long parent = clk_get_rate(clk->parent); |
| u32 div; |
| |
| if (parent < rate) |
| return parent; |
| |
| div = (parent / rate) - 1; |
| if (div > armclk_mask) |
| div = armclk_mask; |
| |
| return parent / (div + 1); |
| } |
| |
| static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) |
| { |
| unsigned long parent = clk_get_rate(clk->parent); |
| u32 div; |
| u32 val; |
| |
| if (rate < parent / (armclk_mask + 1)) |
| return -EINVAL; |
| |
| rate = clk_round_rate(clk, rate); |
| div = clk_get_rate(clk->parent) / rate; |
| |
| val = __raw_readl(S3C_CLK_DIV0); |
| val &= ~armclk_mask; |
| val |= (div - 1); |
| __raw_writel(val, S3C_CLK_DIV0); |
| |
| return 0; |
| |
| } |
| |
| static struct clk clk_arm = { |
| .name = "armclk", |
| .id = -1, |
| .parent = &clk_mout_apll.clk, |
| .get_rate = s3c64xx_clk_arm_get_rate, |
| .set_rate = s3c64xx_clk_arm_set_rate, |
| .round_rate = s3c64xx_clk_arm_round_rate, |
| }; |
| |
| static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) |
| { |
| unsigned long rate = clk_get_rate(clk->parent); |
| |
| printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); |
| |
| if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) |
| rate /= 2; |
| |
| return rate; |
| } |
| |
| static struct clk clk_dout_mpll = { |
| .name = "dout_mpll", |
| .id = -1, |
| .parent = &clk_mout_mpll.clk, |
| .get_rate = s3c64xx_clk_doutmpll_get_rate, |
| }; |
| |
| static struct clk *clkset_spi_mmc_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| &clk_fin_epll, |
| &clk_27m, |
| }; |
| |
| static struct clk_sources clkset_spi_mmc = { |
| .sources = clkset_spi_mmc_list, |
| .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), |
| }; |
| |
| static struct clk *clkset_irda_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| NULL, |
| &clk_27m, |
| }; |
| |
| static struct clk_sources clkset_irda = { |
| .sources = clkset_irda_list, |
| .nr_sources = ARRAY_SIZE(clkset_irda_list), |
| }; |
| |
| static struct clk *clkset_uart_list[] = { |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| NULL, |
| NULL |
| }; |
| |
| static struct clk_sources clkset_uart = { |
| .sources = clkset_uart_list, |
| .nr_sources = ARRAY_SIZE(clkset_uart_list), |
| }; |
| |
| static struct clk *clkset_uhost_list[] = { |
| &clk_48m, |
| &clk_mout_epll.clk, |
| &clk_dout_mpll, |
| &clk_fin_epll, |
| }; |
| |
| static struct clk_sources clkset_uhost = { |
| .sources = clkset_uhost_list, |
| .nr_sources = ARRAY_SIZE(clkset_uhost_list), |
| }; |
| |
| |
| /* The peripheral clocks are all controlled via clocksource followed |
| * by an optional divider and gate stage. We currently roll this into |
| * one clock which hides the intermediate clock from the mux. |
| * |
| * Note, the JPEG clock can only be an even divider... |
| * |
| * The scaler and LCD clocks depend on the S3C64XX version, and also |
| * have a common parent divisor so are not included here. |
| */ |
| |
| static inline struct clksrc_clk *to_clksrc(struct clk *clk) |
| { |
| return container_of(clk, struct clksrc_clk, clk); |
| } |
| |
| static unsigned long s3c64xx_getrate_clksrc(struct clk *clk) |
| { |
| struct clksrc_clk *sclk = to_clksrc(clk); |
| unsigned long rate = clk_get_rate(clk->parent); |
| u32 clkdiv = __raw_readl(sclk->reg_divider); |
| |
| clkdiv >>= sclk->divider_shift; |
| clkdiv &= 0xf; |
| clkdiv++; |
| |
| rate /= clkdiv; |
| return rate; |
| } |
| |
| static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) |
| { |
| struct clksrc_clk *sclk = to_clksrc(clk); |
| void __iomem *reg = sclk->reg_divider; |
| unsigned int div; |
| u32 val; |
| |
| rate = clk_round_rate(clk, rate); |
| div = clk_get_rate(clk->parent) / rate; |
| if (div > 16) |
| return -EINVAL; |
| |
| val = __raw_readl(reg); |
| val &= ~(0xf << sclk->divider_shift); |
| val |= (div - 1) << sclk->divider_shift; |
| __raw_writel(val, reg); |
| |
| return 0; |
| } |
| |
| static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) |
| { |
| struct clksrc_clk *sclk = to_clksrc(clk); |
| struct clk_sources *srcs = sclk->sources; |
| u32 clksrc = __raw_readl(S3C_CLK_SRC); |
| int src_nr = -1; |
| int ptr; |
| |
| for (ptr = 0; ptr < srcs->nr_sources; ptr++) |
| if (srcs->sources[ptr] == parent) { |
| src_nr = ptr; |
| break; |
| } |
| |
| if (src_nr >= 0) { |
| clksrc &= ~sclk->mask; |
| clksrc |= src_nr << sclk->shift; |
| |
| __raw_writel(clksrc, S3C_CLK_SRC); |
| |
| clk->parent = parent; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, |
| unsigned long rate) |
| { |
| unsigned long parent_rate = clk_get_rate(clk->parent); |
| int div; |
| |
| if (rate > parent_rate) |
| rate = parent_rate; |
| else { |
| div = parent_rate / rate; |
| |
| if (div == 0) |
| div = 1; |
| if (div > 16) |
| div = 16; |
| |
| rate = parent_rate / div; |
| } |
| |
| return rate; |
| } |
| |
| static struct clksrc_clk clk_mmc0 = { |
| .clk = { |
| .name = "mmc_bus", |
| .id = 0, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC0, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_MMC0_SHIFT, |
| .mask = S3C6400_CLKSRC_MMC0_MASK, |
| .sources = &clkset_spi_mmc, |
| .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT, |
| .reg_divider = S3C_CLK_DIV1, |
| }; |
| |
| static struct clksrc_clk clk_mmc1 = { |
| .clk = { |
| .name = "mmc_bus", |
| .id = 1, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC1, |
| .enable = s3c64xx_sclk_ctrl, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_MMC1_SHIFT, |
| .mask = S3C6400_CLKSRC_MMC1_MASK, |
| .sources = &clkset_spi_mmc, |
| .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT, |
| .reg_divider = S3C_CLK_DIV1, |
| }; |
| |
| static struct clksrc_clk clk_mmc2 = { |
| .clk = { |
| .name = "mmc_bus", |
| .id = 2, |
| .ctrlbit = S3C_CLKCON_SCLK_MMC2, |
| .enable = s3c64xx_sclk_ctrl, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_MMC2_SHIFT, |
| .mask = S3C6400_CLKSRC_MMC2_MASK, |
| .sources = &clkset_spi_mmc, |
| .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT, |
| .reg_divider = S3C_CLK_DIV1, |
| }; |
| |
| static struct clksrc_clk clk_usbhost = { |
| .clk = { |
| .name = "usb-bus-host", |
| .id = -1, |
| .ctrlbit = S3C_CLKCON_SCLK_UHOST, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_UHOST_SHIFT, |
| .mask = S3C6400_CLKSRC_UHOST_MASK, |
| .sources = &clkset_uhost, |
| .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT, |
| .reg_divider = S3C_CLK_DIV1, |
| }; |
| |
| static struct clksrc_clk clk_uart_uclk1 = { |
| .clk = { |
| .name = "uclk1", |
| .id = -1, |
| .ctrlbit = S3C_CLKCON_SCLK_UART, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_UART_SHIFT, |
| .mask = S3C6400_CLKSRC_UART_MASK, |
| .sources = &clkset_uart, |
| .divider_shift = S3C6400_CLKDIV2_UART_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| /* Where does UCLK0 come from? */ |
| |
| static struct clksrc_clk clk_spi0 = { |
| .clk = { |
| .name = "spi-bus", |
| .id = 0, |
| .ctrlbit = S3C_CLKCON_SCLK_SPI0, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_SPI0_SHIFT, |
| .mask = S3C6400_CLKSRC_SPI0_MASK, |
| .sources = &clkset_spi_mmc, |
| .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| static struct clksrc_clk clk_spi1 = { |
| .clk = { |
| .name = "spi-bus", |
| .id = 1, |
| .ctrlbit = S3C_CLKCON_SCLK_SPI1, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_SPI1_SHIFT, |
| .mask = S3C6400_CLKSRC_SPI1_MASK, |
| .sources = &clkset_spi_mmc, |
| .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| static struct clk clk_iis_cd0 = { |
| .name = "iis_cdclk0", |
| .id = -1, |
| }; |
| |
| static struct clk clk_iis_cd1 = { |
| .name = "iis_cdclk1", |
| .id = -1, |
| }; |
| |
| static struct clk clk_pcm_cd = { |
| .name = "pcm_cdclk", |
| .id = -1, |
| }; |
| |
| static struct clk *clkset_audio0_list[] = { |
| [0] = &clk_mout_epll.clk, |
| [1] = &clk_dout_mpll, |
| [2] = &clk_fin_epll, |
| [3] = &clk_iis_cd0, |
| [4] = &clk_pcm_cd, |
| }; |
| |
| static struct clk_sources clkset_audio0 = { |
| .sources = clkset_audio0_list, |
| .nr_sources = ARRAY_SIZE(clkset_audio0_list), |
| }; |
| |
| static struct clksrc_clk clk_audio0 = { |
| .clk = { |
| .name = "audio-bus", |
| .id = 0, |
| .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_AUDIO0_SHIFT, |
| .mask = S3C6400_CLKSRC_AUDIO0_MASK, |
| .sources = &clkset_audio0, |
| .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| static struct clk *clkset_audio1_list[] = { |
| [0] = &clk_mout_epll.clk, |
| [1] = &clk_dout_mpll, |
| [2] = &clk_fin_epll, |
| [3] = &clk_iis_cd1, |
| [4] = &clk_pcm_cd, |
| }; |
| |
| static struct clk_sources clkset_audio1 = { |
| .sources = clkset_audio1_list, |
| .nr_sources = ARRAY_SIZE(clkset_audio1_list), |
| }; |
| |
| static struct clksrc_clk clk_audio1 = { |
| .clk = { |
| .name = "audio-bus", |
| .id = 1, |
| .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_AUDIO1_SHIFT, |
| .mask = S3C6400_CLKSRC_AUDIO1_MASK, |
| .sources = &clkset_audio1, |
| .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| static struct clksrc_clk clk_irda = { |
| .clk = { |
| .name = "irda-bus", |
| .id = 0, |
| .ctrlbit = S3C_CLKCON_SCLK_IRDA, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = S3C6400_CLKSRC_IRDA_SHIFT, |
| .mask = S3C6400_CLKSRC_IRDA_MASK, |
| .sources = &clkset_irda, |
| .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT, |
| .reg_divider = S3C_CLK_DIV2, |
| }; |
| |
| static struct clk *clkset_camif_list[] = { |
| &clk_h2, |
| }; |
| |
| static struct clk_sources clkset_camif = { |
| .sources = clkset_camif_list, |
| .nr_sources = ARRAY_SIZE(clkset_camif_list), |
| }; |
| |
| static struct clksrc_clk clk_camif = { |
| .clk = { |
| .name = "camera", |
| .id = -1, |
| .ctrlbit = S3C_CLKCON_SCLK_CAM, |
| .enable = s3c64xx_sclk_ctrl, |
| .set_parent = s3c64xx_setparent_clksrc, |
| .get_rate = s3c64xx_getrate_clksrc, |
| .set_rate = s3c64xx_setrate_clksrc, |
| .round_rate = s3c64xx_roundrate_clksrc, |
| }, |
| .shift = 0, |
| .mask = 0, |
| .sources = &clkset_camif, |
| .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT, |
| .reg_divider = S3C_CLK_DIV0, |
| }; |
| |
| /* Clock initialisation code */ |
| |
| static struct clksrc_clk *init_parents[] = { |
| &clk_mout_apll, |
| &clk_mout_epll, |
| &clk_mout_mpll, |
| &clk_mmc0, |
| &clk_mmc1, |
| &clk_mmc2, |
| &clk_usbhost, |
| &clk_uart_uclk1, |
| &clk_spi0, |
| &clk_spi1, |
| &clk_audio0, |
| &clk_audio1, |
| &clk_irda, |
| &clk_camif, |
| }; |
| |
| static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk) |
| { |
| struct clk_sources *srcs = clk->sources; |
| u32 clksrc = __raw_readl(S3C_CLK_SRC); |
| |
| clksrc &= clk->mask; |
| clksrc >>= clk->shift; |
| |
| if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { |
| printk(KERN_ERR "%s: bad source %d\n", |
| clk->clk.name, clksrc); |
| return; |
| } |
| |
| clk->clk.parent = srcs->sources[clksrc]; |
| |
| printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", |
| clk->clk.name, clk->clk.parent->name, clksrc, |
| clk_get_rate(&clk->clk)); |
| } |
| |
| #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) |
| |
| void __init_or_cpufreq s3c6400_setup_clocks(void) |
| { |
| struct clk *xtal_clk; |
| unsigned long xtal; |
| unsigned long fclk; |
| unsigned long hclk; |
| unsigned long hclk2; |
| unsigned long pclk; |
| unsigned long epll; |
| unsigned long apll; |
| unsigned long mpll; |
| unsigned int ptr; |
| u32 clkdiv0; |
| |
| printk(KERN_DEBUG "%s: registering clocks\n", __func__); |
| |
| clkdiv0 = __raw_readl(S3C_CLK_DIV0); |
| printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); |
| |
| xtal_clk = clk_get(NULL, "xtal"); |
| BUG_ON(IS_ERR(xtal_clk)); |
| |
| xtal = clk_get_rate(xtal_clk); |
| clk_put(xtal_clk); |
| |
| printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); |
| |
| epll = s3c6400_get_epll(xtal); |
| mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); |
| apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); |
| |
| fclk = mpll; |
| |
| printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", |
| apll, mpll, epll); |
| |
| hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); |
| hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); |
| pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); |
| |
| printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", |
| hclk2, hclk, pclk); |
| |
| clk_fout_mpll.rate = mpll; |
| clk_fout_epll.rate = epll; |
| clk_fout_apll.rate = apll; |
| |
| clk_h2.rate = hclk2; |
| clk_h.rate = hclk; |
| clk_p.rate = pclk; |
| clk_f.rate = fclk; |
| |
| for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) |
| s3c6400_set_clksrc(init_parents[ptr]); |
| } |
| |
| static struct clk *clks[] __initdata = { |
| &clk_ext_xtal_mux, |
| &clk_iis_cd0, |
| &clk_iis_cd1, |
| &clk_pcm_cd, |
| &clk_mout_epll.clk, |
| &clk_fout_epll, |
| &clk_mout_mpll.clk, |
| &clk_dout_mpll, |
| &clk_mmc0.clk, |
| &clk_mmc1.clk, |
| &clk_mmc2.clk, |
| &clk_usbhost.clk, |
| &clk_uart_uclk1.clk, |
| &clk_spi0.clk, |
| &clk_spi1.clk, |
| &clk_audio0.clk, |
| &clk_audio1.clk, |
| &clk_irda.clk, |
| &clk_camif.clk, |
| &clk_arm, |
| }; |
| |
| /** |
| * s3c6400_register_clocks - register clocks for s3c6400 and above |
| * @armclk_divlimit: Divisor mask for ARMCLK |
| * |
| * Register the clocks for the S3C6400 and above SoC range, such |
| * as ARMCLK and the clocks which have divider chains attached. |
| * |
| * This call does not setup the clocks, which is left to the |
| * s3c6400_setup_clocks() call which may be needed by the cpufreq |
| * or resume code to re-set the clocks if the bootloader has changed |
| * them. |
| */ |
| void __init s3c6400_register_clocks(unsigned armclk_divlimit) |
| { |
| struct clk *clkp; |
| int ret; |
| int ptr; |
| |
| armclk_mask = armclk_divlimit; |
| |
| for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { |
| clkp = clks[ptr]; |
| ret = s3c24xx_register_clock(clkp); |
| if (ret < 0) { |
| printk(KERN_ERR "Failed to register clock %s (%d)\n", |
| clkp->name, ret); |
| } |
| } |
| |
| clk_mpll.parent = &clk_mout_mpll.clk; |
| clk_epll.parent = &clk_mout_epll.clk; |
| } |