| /* |
| * Virtio SCSI HBA driver |
| * |
| * Copyright IBM Corp. 2010 |
| * Copyright Red Hat, Inc. 2011 |
| * |
| * Authors: |
| * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> |
| * Paolo Bonzini <pbonzini@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/mempool.h> |
| #include <linux/virtio.h> |
| #include <linux/virtio_ids.h> |
| #include <linux/virtio_config.h> |
| #include <linux/virtio_scsi.h> |
| #include <linux/cpu.h> |
| #include <linux/blkdev.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_tcq.h> |
| #include <linux/seqlock.h> |
| |
| #define VIRTIO_SCSI_MEMPOOL_SZ 64 |
| #define VIRTIO_SCSI_EVENT_LEN 8 |
| #define VIRTIO_SCSI_VQ_BASE 2 |
| |
| /* Command queue element */ |
| struct virtio_scsi_cmd { |
| struct scsi_cmnd *sc; |
| struct completion *comp; |
| union { |
| struct virtio_scsi_cmd_req cmd; |
| struct virtio_scsi_cmd_req_pi cmd_pi; |
| struct virtio_scsi_ctrl_tmf_req tmf; |
| struct virtio_scsi_ctrl_an_req an; |
| } req; |
| union { |
| struct virtio_scsi_cmd_resp cmd; |
| struct virtio_scsi_ctrl_tmf_resp tmf; |
| struct virtio_scsi_ctrl_an_resp an; |
| struct virtio_scsi_event evt; |
| } resp; |
| } ____cacheline_aligned_in_smp; |
| |
| struct virtio_scsi_event_node { |
| struct virtio_scsi *vscsi; |
| struct virtio_scsi_event event; |
| struct work_struct work; |
| }; |
| |
| struct virtio_scsi_vq { |
| /* Protects vq */ |
| spinlock_t vq_lock; |
| |
| struct virtqueue *vq; |
| }; |
| |
| /* |
| * Per-target queue state. |
| * |
| * This struct holds the data needed by the queue steering policy. When a |
| * target is sent multiple requests, we need to drive them to the same queue so |
| * that FIFO processing order is kept. However, if a target was idle, we can |
| * choose a queue arbitrarily. In this case the queue is chosen according to |
| * the current VCPU, so the driver expects the number of request queues to be |
| * equal to the number of VCPUs. This makes it easy and fast to select the |
| * queue, and also lets the driver optimize the IRQ affinity for the virtqueues |
| * (each virtqueue's affinity is set to the CPU that "owns" the queue). |
| * |
| * tgt_seq is held to serialize reading and writing req_vq. |
| * |
| * Decrements of reqs are never concurrent with writes of req_vq: before the |
| * decrement reqs will be != 0; after the decrement the virtqueue completion |
| * routine will not use the req_vq so it can be changed by a new request. |
| * Thus they can happen outside the tgt_seq, provided of course we make reqs |
| * an atomic_t. |
| */ |
| struct virtio_scsi_target_state { |
| seqcount_t tgt_seq; |
| |
| /* Count of outstanding requests. */ |
| atomic_t reqs; |
| |
| /* Currently active virtqueue for requests sent to this target. */ |
| struct virtio_scsi_vq *req_vq; |
| }; |
| |
| /* Driver instance state */ |
| struct virtio_scsi { |
| struct virtio_device *vdev; |
| |
| /* Get some buffers ready for event vq */ |
| struct virtio_scsi_event_node event_list[VIRTIO_SCSI_EVENT_LEN]; |
| |
| u32 num_queues; |
| |
| /* If the affinity hint is set for virtqueues */ |
| bool affinity_hint_set; |
| |
| /* CPU hotplug notifier */ |
| struct notifier_block nb; |
| |
| struct virtio_scsi_vq ctrl_vq; |
| struct virtio_scsi_vq event_vq; |
| struct virtio_scsi_vq req_vqs[]; |
| }; |
| |
| static struct kmem_cache *virtscsi_cmd_cache; |
| static mempool_t *virtscsi_cmd_pool; |
| |
| static inline struct Scsi_Host *virtio_scsi_host(struct virtio_device *vdev) |
| { |
| return vdev->priv; |
| } |
| |
| static void virtscsi_compute_resid(struct scsi_cmnd *sc, u32 resid) |
| { |
| if (!resid) |
| return; |
| |
| if (!scsi_bidi_cmnd(sc)) { |
| scsi_set_resid(sc, resid); |
| return; |
| } |
| |
| scsi_in(sc)->resid = min(resid, scsi_in(sc)->length); |
| scsi_out(sc)->resid = resid - scsi_in(sc)->resid; |
| } |
| |
| /** |
| * virtscsi_complete_cmd - finish a scsi_cmd and invoke scsi_done |
| * |
| * Called with vq_lock held. |
| */ |
| static void virtscsi_complete_cmd(struct virtio_scsi *vscsi, void *buf) |
| { |
| struct virtio_scsi_cmd *cmd = buf; |
| struct scsi_cmnd *sc = cmd->sc; |
| struct virtio_scsi_cmd_resp *resp = &cmd->resp.cmd; |
| struct virtio_scsi_target_state *tgt = |
| scsi_target(sc->device)->hostdata; |
| |
| dev_dbg(&sc->device->sdev_gendev, |
| "cmd %p response %u status %#02x sense_len %u\n", |
| sc, resp->response, resp->status, resp->sense_len); |
| |
| sc->result = resp->status; |
| virtscsi_compute_resid(sc, resp->resid); |
| switch (resp->response) { |
| case VIRTIO_SCSI_S_OK: |
| set_host_byte(sc, DID_OK); |
| break; |
| case VIRTIO_SCSI_S_OVERRUN: |
| set_host_byte(sc, DID_ERROR); |
| break; |
| case VIRTIO_SCSI_S_ABORTED: |
| set_host_byte(sc, DID_ABORT); |
| break; |
| case VIRTIO_SCSI_S_BAD_TARGET: |
| set_host_byte(sc, DID_BAD_TARGET); |
| break; |
| case VIRTIO_SCSI_S_RESET: |
| set_host_byte(sc, DID_RESET); |
| break; |
| case VIRTIO_SCSI_S_BUSY: |
| set_host_byte(sc, DID_BUS_BUSY); |
| break; |
| case VIRTIO_SCSI_S_TRANSPORT_FAILURE: |
| set_host_byte(sc, DID_TRANSPORT_DISRUPTED); |
| break; |
| case VIRTIO_SCSI_S_TARGET_FAILURE: |
| set_host_byte(sc, DID_TARGET_FAILURE); |
| break; |
| case VIRTIO_SCSI_S_NEXUS_FAILURE: |
| set_host_byte(sc, DID_NEXUS_FAILURE); |
| break; |
| default: |
| scmd_printk(KERN_WARNING, sc, "Unknown response %d", |
| resp->response); |
| /* fall through */ |
| case VIRTIO_SCSI_S_FAILURE: |
| set_host_byte(sc, DID_ERROR); |
| break; |
| } |
| |
| WARN_ON(resp->sense_len > VIRTIO_SCSI_SENSE_SIZE); |
| if (sc->sense_buffer) { |
| memcpy(sc->sense_buffer, resp->sense, |
| min_t(u32, resp->sense_len, VIRTIO_SCSI_SENSE_SIZE)); |
| if (resp->sense_len) |
| set_driver_byte(sc, DRIVER_SENSE); |
| } |
| |
| sc->scsi_done(sc); |
| |
| atomic_dec(&tgt->reqs); |
| } |
| |
| static void virtscsi_vq_done(struct virtio_scsi *vscsi, |
| struct virtio_scsi_vq *virtscsi_vq, |
| void (*fn)(struct virtio_scsi *vscsi, void *buf)) |
| { |
| void *buf; |
| unsigned int len; |
| unsigned long flags; |
| struct virtqueue *vq = virtscsi_vq->vq; |
| |
| spin_lock_irqsave(&virtscsi_vq->vq_lock, flags); |
| do { |
| virtqueue_disable_cb(vq); |
| while ((buf = virtqueue_get_buf(vq, &len)) != NULL) |
| fn(vscsi, buf); |
| |
| if (unlikely(virtqueue_is_broken(vq))) |
| break; |
| } while (!virtqueue_enable_cb(vq)); |
| spin_unlock_irqrestore(&virtscsi_vq->vq_lock, flags); |
| } |
| |
| static void virtscsi_req_done(struct virtqueue *vq) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| int index = vq->index - VIRTIO_SCSI_VQ_BASE; |
| struct virtio_scsi_vq *req_vq = &vscsi->req_vqs[index]; |
| |
| virtscsi_vq_done(vscsi, req_vq, virtscsi_complete_cmd); |
| }; |
| |
| static void virtscsi_poll_requests(struct virtio_scsi *vscsi) |
| { |
| int i, num_vqs; |
| |
| num_vqs = vscsi->num_queues; |
| for (i = 0; i < num_vqs; i++) |
| virtscsi_vq_done(vscsi, &vscsi->req_vqs[i], |
| virtscsi_complete_cmd); |
| } |
| |
| static void virtscsi_complete_free(struct virtio_scsi *vscsi, void *buf) |
| { |
| struct virtio_scsi_cmd *cmd = buf; |
| |
| if (cmd->comp) |
| complete_all(cmd->comp); |
| } |
| |
| static void virtscsi_ctrl_done(struct virtqueue *vq) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| |
| virtscsi_vq_done(vscsi, &vscsi->ctrl_vq, virtscsi_complete_free); |
| }; |
| |
| static void virtscsi_handle_event(struct work_struct *work); |
| |
| static int virtscsi_kick_event(struct virtio_scsi *vscsi, |
| struct virtio_scsi_event_node *event_node) |
| { |
| int err; |
| struct scatterlist sg; |
| unsigned long flags; |
| |
| INIT_WORK(&event_node->work, virtscsi_handle_event); |
| sg_init_one(&sg, &event_node->event, sizeof(struct virtio_scsi_event)); |
| |
| spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags); |
| |
| err = virtqueue_add_inbuf(vscsi->event_vq.vq, &sg, 1, event_node, |
| GFP_ATOMIC); |
| if (!err) |
| virtqueue_kick(vscsi->event_vq.vq); |
| |
| spin_unlock_irqrestore(&vscsi->event_vq.vq_lock, flags); |
| |
| return err; |
| } |
| |
| static int virtscsi_kick_event_all(struct virtio_scsi *vscsi) |
| { |
| int i; |
| |
| for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++) { |
| vscsi->event_list[i].vscsi = vscsi; |
| virtscsi_kick_event(vscsi, &vscsi->event_list[i]); |
| } |
| |
| return 0; |
| } |
| |
| static void virtscsi_cancel_event_work(struct virtio_scsi *vscsi) |
| { |
| int i; |
| |
| for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++) |
| cancel_work_sync(&vscsi->event_list[i].work); |
| } |
| |
| static void virtscsi_handle_transport_reset(struct virtio_scsi *vscsi, |
| struct virtio_scsi_event *event) |
| { |
| struct scsi_device *sdev; |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); |
| unsigned int target = event->lun[1]; |
| unsigned int lun = (event->lun[2] << 8) | event->lun[3]; |
| |
| switch (event->reason) { |
| case VIRTIO_SCSI_EVT_RESET_RESCAN: |
| scsi_add_device(shost, 0, target, lun); |
| break; |
| case VIRTIO_SCSI_EVT_RESET_REMOVED: |
| sdev = scsi_device_lookup(shost, 0, target, lun); |
| if (sdev) { |
| scsi_remove_device(sdev); |
| scsi_device_put(sdev); |
| } else { |
| pr_err("SCSI device %d 0 %d %d not found\n", |
| shost->host_no, target, lun); |
| } |
| break; |
| default: |
| pr_info("Unsupport virtio scsi event reason %x\n", event->reason); |
| } |
| } |
| |
| static void virtscsi_handle_param_change(struct virtio_scsi *vscsi, |
| struct virtio_scsi_event *event) |
| { |
| struct scsi_device *sdev; |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); |
| unsigned int target = event->lun[1]; |
| unsigned int lun = (event->lun[2] << 8) | event->lun[3]; |
| u8 asc = event->reason & 255; |
| u8 ascq = event->reason >> 8; |
| |
| sdev = scsi_device_lookup(shost, 0, target, lun); |
| if (!sdev) { |
| pr_err("SCSI device %d 0 %d %d not found\n", |
| shost->host_no, target, lun); |
| return; |
| } |
| |
| /* Handle "Parameters changed", "Mode parameters changed", and |
| "Capacity data has changed". */ |
| if (asc == 0x2a && (ascq == 0x00 || ascq == 0x01 || ascq == 0x09)) |
| scsi_rescan_device(&sdev->sdev_gendev); |
| |
| scsi_device_put(sdev); |
| } |
| |
| static void virtscsi_handle_event(struct work_struct *work) |
| { |
| struct virtio_scsi_event_node *event_node = |
| container_of(work, struct virtio_scsi_event_node, work); |
| struct virtio_scsi *vscsi = event_node->vscsi; |
| struct virtio_scsi_event *event = &event_node->event; |
| |
| if (event->event & VIRTIO_SCSI_T_EVENTS_MISSED) { |
| event->event &= ~VIRTIO_SCSI_T_EVENTS_MISSED; |
| scsi_scan_host(virtio_scsi_host(vscsi->vdev)); |
| } |
| |
| switch (event->event) { |
| case VIRTIO_SCSI_T_NO_EVENT: |
| break; |
| case VIRTIO_SCSI_T_TRANSPORT_RESET: |
| virtscsi_handle_transport_reset(vscsi, event); |
| break; |
| case VIRTIO_SCSI_T_PARAM_CHANGE: |
| virtscsi_handle_param_change(vscsi, event); |
| break; |
| default: |
| pr_err("Unsupport virtio scsi event %x\n", event->event); |
| } |
| virtscsi_kick_event(vscsi, event_node); |
| } |
| |
| static void virtscsi_complete_event(struct virtio_scsi *vscsi, void *buf) |
| { |
| struct virtio_scsi_event_node *event_node = buf; |
| |
| schedule_work(&event_node->work); |
| } |
| |
| static void virtscsi_event_done(struct virtqueue *vq) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| |
| virtscsi_vq_done(vscsi, &vscsi->event_vq, virtscsi_complete_event); |
| }; |
| |
| /** |
| * virtscsi_add_cmd - add a virtio_scsi_cmd to a virtqueue |
| * @vq : the struct virtqueue we're talking about |
| * @cmd : command structure |
| * @req_size : size of the request buffer |
| * @resp_size : size of the response buffer |
| */ |
| static int virtscsi_add_cmd(struct virtqueue *vq, |
| struct virtio_scsi_cmd *cmd, |
| size_t req_size, size_t resp_size) |
| { |
| struct scsi_cmnd *sc = cmd->sc; |
| struct scatterlist *sgs[6], req, resp; |
| struct sg_table *out, *in; |
| unsigned out_num = 0, in_num = 0; |
| |
| out = in = NULL; |
| |
| if (sc && sc->sc_data_direction != DMA_NONE) { |
| if (sc->sc_data_direction != DMA_FROM_DEVICE) |
| out = &scsi_out(sc)->table; |
| if (sc->sc_data_direction != DMA_TO_DEVICE) |
| in = &scsi_in(sc)->table; |
| } |
| |
| /* Request header. */ |
| sg_init_one(&req, &cmd->req, req_size); |
| sgs[out_num++] = &req; |
| |
| /* Data-out buffer. */ |
| if (out) { |
| /* Place WRITE protection SGLs before Data OUT payload */ |
| if (scsi_prot_sg_count(sc)) |
| sgs[out_num++] = scsi_prot_sglist(sc); |
| sgs[out_num++] = out->sgl; |
| } |
| |
| /* Response header. */ |
| sg_init_one(&resp, &cmd->resp, resp_size); |
| sgs[out_num + in_num++] = &resp; |
| |
| /* Data-in buffer */ |
| if (in) { |
| /* Place READ protection SGLs before Data IN payload */ |
| if (scsi_prot_sg_count(sc)) |
| sgs[out_num + in_num++] = scsi_prot_sglist(sc); |
| sgs[out_num + in_num++] = in->sgl; |
| } |
| |
| return virtqueue_add_sgs(vq, sgs, out_num, in_num, cmd, GFP_ATOMIC); |
| } |
| |
| static int virtscsi_kick_cmd(struct virtio_scsi_vq *vq, |
| struct virtio_scsi_cmd *cmd, |
| size_t req_size, size_t resp_size) |
| { |
| unsigned long flags; |
| int err; |
| bool needs_kick = false; |
| |
| spin_lock_irqsave(&vq->vq_lock, flags); |
| err = virtscsi_add_cmd(vq->vq, cmd, req_size, resp_size); |
| if (!err) |
| needs_kick = virtqueue_kick_prepare(vq->vq); |
| |
| spin_unlock_irqrestore(&vq->vq_lock, flags); |
| |
| if (needs_kick) |
| virtqueue_notify(vq->vq); |
| return err; |
| } |
| |
| static void virtio_scsi_init_hdr(struct virtio_scsi_cmd_req *cmd, |
| struct scsi_cmnd *sc) |
| { |
| cmd->lun[0] = 1; |
| cmd->lun[1] = sc->device->id; |
| cmd->lun[2] = (sc->device->lun >> 8) | 0x40; |
| cmd->lun[3] = sc->device->lun & 0xff; |
| cmd->tag = (unsigned long)sc; |
| cmd->task_attr = VIRTIO_SCSI_S_SIMPLE; |
| cmd->prio = 0; |
| cmd->crn = 0; |
| } |
| |
| static void virtio_scsi_init_hdr_pi(struct virtio_scsi_cmd_req_pi *cmd_pi, |
| struct scsi_cmnd *sc) |
| { |
| struct request *rq = sc->request; |
| struct blk_integrity *bi; |
| |
| virtio_scsi_init_hdr((struct virtio_scsi_cmd_req *)cmd_pi, sc); |
| |
| if (!rq || !scsi_prot_sg_count(sc)) |
| return; |
| |
| bi = blk_get_integrity(rq->rq_disk); |
| |
| if (sc->sc_data_direction == DMA_TO_DEVICE) |
| cmd_pi->pi_bytesout = blk_rq_sectors(rq) * bi->tuple_size; |
| else if (sc->sc_data_direction == DMA_FROM_DEVICE) |
| cmd_pi->pi_bytesin = blk_rq_sectors(rq) * bi->tuple_size; |
| } |
| |
| static int virtscsi_queuecommand(struct virtio_scsi *vscsi, |
| struct virtio_scsi_vq *req_vq, |
| struct scsi_cmnd *sc) |
| { |
| struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); |
| struct virtio_scsi_cmd *cmd = scsi_cmd_priv(sc); |
| int req_size; |
| |
| BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize); |
| |
| /* TODO: check feature bit and fail if unsupported? */ |
| BUG_ON(sc->sc_data_direction == DMA_BIDIRECTIONAL); |
| |
| dev_dbg(&sc->device->sdev_gendev, |
| "cmd %p CDB: %#02x\n", sc, sc->cmnd[0]); |
| |
| memset(cmd, 0, sizeof(*cmd)); |
| cmd->sc = sc; |
| |
| BUG_ON(sc->cmd_len > VIRTIO_SCSI_CDB_SIZE); |
| |
| if (virtio_has_feature(vscsi->vdev, VIRTIO_SCSI_F_T10_PI)) { |
| virtio_scsi_init_hdr_pi(&cmd->req.cmd_pi, sc); |
| memcpy(cmd->req.cmd_pi.cdb, sc->cmnd, sc->cmd_len); |
| req_size = sizeof(cmd->req.cmd_pi); |
| } else { |
| virtio_scsi_init_hdr(&cmd->req.cmd, sc); |
| memcpy(cmd->req.cmd.cdb, sc->cmnd, sc->cmd_len); |
| req_size = sizeof(cmd->req.cmd); |
| } |
| |
| if (virtscsi_kick_cmd(req_vq, cmd, req_size, sizeof(cmd->resp.cmd)) != 0) |
| return SCSI_MLQUEUE_HOST_BUSY; |
| return 0; |
| } |
| |
| static int virtscsi_queuecommand_single(struct Scsi_Host *sh, |
| struct scsi_cmnd *sc) |
| { |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| struct virtio_scsi_target_state *tgt = |
| scsi_target(sc->device)->hostdata; |
| |
| atomic_inc(&tgt->reqs); |
| return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc); |
| } |
| |
| static struct virtio_scsi_vq *virtscsi_pick_vq(struct virtio_scsi *vscsi, |
| struct virtio_scsi_target_state *tgt) |
| { |
| struct virtio_scsi_vq *vq; |
| unsigned long flags; |
| u32 queue_num; |
| |
| local_irq_save(flags); |
| if (atomic_inc_return(&tgt->reqs) > 1) { |
| unsigned long seq; |
| |
| do { |
| seq = read_seqcount_begin(&tgt->tgt_seq); |
| vq = tgt->req_vq; |
| } while (read_seqcount_retry(&tgt->tgt_seq, seq)); |
| } else { |
| /* no writes can be concurrent because of atomic_t */ |
| write_seqcount_begin(&tgt->tgt_seq); |
| |
| /* keep previous req_vq if a reader just arrived */ |
| if (unlikely(atomic_read(&tgt->reqs) > 1)) { |
| vq = tgt->req_vq; |
| goto unlock; |
| } |
| |
| queue_num = smp_processor_id(); |
| while (unlikely(queue_num >= vscsi->num_queues)) |
| queue_num -= vscsi->num_queues; |
| tgt->req_vq = vq = &vscsi->req_vqs[queue_num]; |
| unlock: |
| write_seqcount_end(&tgt->tgt_seq); |
| } |
| local_irq_restore(flags); |
| |
| return vq; |
| } |
| |
| static int virtscsi_queuecommand_multi(struct Scsi_Host *sh, |
| struct scsi_cmnd *sc) |
| { |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| struct virtio_scsi_target_state *tgt = |
| scsi_target(sc->device)->hostdata; |
| struct virtio_scsi_vq *req_vq = virtscsi_pick_vq(vscsi, tgt); |
| |
| return virtscsi_queuecommand(vscsi, req_vq, sc); |
| } |
| |
| static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) |
| { |
| DECLARE_COMPLETION_ONSTACK(comp); |
| int ret = FAILED; |
| |
| cmd->comp = ∁ |
| if (virtscsi_kick_cmd(&vscsi->ctrl_vq, cmd, |
| sizeof cmd->req.tmf, sizeof cmd->resp.tmf) < 0) |
| goto out; |
| |
| wait_for_completion(&comp); |
| if (cmd->resp.tmf.response == VIRTIO_SCSI_S_OK || |
| cmd->resp.tmf.response == VIRTIO_SCSI_S_FUNCTION_SUCCEEDED) |
| ret = SUCCESS; |
| |
| /* |
| * The spec guarantees that all requests related to the TMF have |
| * been completed, but the callback might not have run yet if |
| * we're using independent interrupts (e.g. MSI). Poll the |
| * virtqueues once. |
| * |
| * In the abort case, sc->scsi_done will do nothing, because |
| * the block layer must have detected a timeout and as a result |
| * REQ_ATOM_COMPLETE has been set. |
| */ |
| virtscsi_poll_requests(vscsi); |
| |
| out: |
| mempool_free(cmd, virtscsi_cmd_pool); |
| return ret; |
| } |
| |
| static int virtscsi_device_reset(struct scsi_cmnd *sc) |
| { |
| struct virtio_scsi *vscsi = shost_priv(sc->device->host); |
| struct virtio_scsi_cmd *cmd; |
| |
| sdev_printk(KERN_INFO, sc->device, "device reset\n"); |
| cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); |
| if (!cmd) |
| return FAILED; |
| |
| memset(cmd, 0, sizeof(*cmd)); |
| cmd->sc = sc; |
| cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ |
| .type = VIRTIO_SCSI_T_TMF, |
| .subtype = VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET, |
| .lun[0] = 1, |
| .lun[1] = sc->device->id, |
| .lun[2] = (sc->device->lun >> 8) | 0x40, |
| .lun[3] = sc->device->lun & 0xff, |
| }; |
| return virtscsi_tmf(vscsi, cmd); |
| } |
| |
| /** |
| * virtscsi_change_queue_depth() - Change a virtscsi target's queue depth |
| * @sdev: Virtscsi target whose queue depth to change |
| * @qdepth: New queue depth |
| * @reason: Reason for the queue depth change. |
| */ |
| static int virtscsi_change_queue_depth(struct scsi_device *sdev, |
| int qdepth, |
| int reason) |
| { |
| struct Scsi_Host *shost = sdev->host; |
| int max_depth = shost->cmd_per_lun; |
| |
| switch (reason) { |
| case SCSI_QDEPTH_QFULL: /* Drop qdepth in response to BUSY state */ |
| scsi_track_queue_full(sdev, qdepth); |
| break; |
| case SCSI_QDEPTH_RAMP_UP: /* Raise qdepth after BUSY state resolved */ |
| case SCSI_QDEPTH_DEFAULT: /* Manual change via sysfs */ |
| scsi_adjust_queue_depth(sdev, |
| scsi_get_tag_type(sdev), |
| min(max_depth, qdepth)); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return sdev->queue_depth; |
| } |
| |
| static int virtscsi_abort(struct scsi_cmnd *sc) |
| { |
| struct virtio_scsi *vscsi = shost_priv(sc->device->host); |
| struct virtio_scsi_cmd *cmd; |
| |
| scmd_printk(KERN_INFO, sc, "abort\n"); |
| cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); |
| if (!cmd) |
| return FAILED; |
| |
| memset(cmd, 0, sizeof(*cmd)); |
| cmd->sc = sc; |
| cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ |
| .type = VIRTIO_SCSI_T_TMF, |
| .subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK, |
| .lun[0] = 1, |
| .lun[1] = sc->device->id, |
| .lun[2] = (sc->device->lun >> 8) | 0x40, |
| .lun[3] = sc->device->lun & 0xff, |
| .tag = (unsigned long)sc, |
| }; |
| return virtscsi_tmf(vscsi, cmd); |
| } |
| |
| static int virtscsi_target_alloc(struct scsi_target *starget) |
| { |
| struct Scsi_Host *sh = dev_to_shost(starget->dev.parent); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| |
| struct virtio_scsi_target_state *tgt = |
| kmalloc(sizeof(*tgt), GFP_KERNEL); |
| if (!tgt) |
| return -ENOMEM; |
| |
| seqcount_init(&tgt->tgt_seq); |
| atomic_set(&tgt->reqs, 0); |
| tgt->req_vq = &vscsi->req_vqs[0]; |
| |
| starget->hostdata = tgt; |
| return 0; |
| } |
| |
| static void virtscsi_target_destroy(struct scsi_target *starget) |
| { |
| struct virtio_scsi_target_state *tgt = starget->hostdata; |
| kfree(tgt); |
| } |
| |
| static struct scsi_host_template virtscsi_host_template_single = { |
| .module = THIS_MODULE, |
| .name = "Virtio SCSI HBA", |
| .proc_name = "virtio_scsi", |
| .this_id = -1, |
| .cmd_size = sizeof(struct virtio_scsi_cmd), |
| .queuecommand = virtscsi_queuecommand_single, |
| .change_queue_depth = virtscsi_change_queue_depth, |
| .eh_abort_handler = virtscsi_abort, |
| .eh_device_reset_handler = virtscsi_device_reset, |
| |
| .can_queue = 1024, |
| .dma_boundary = UINT_MAX, |
| .use_clustering = ENABLE_CLUSTERING, |
| .target_alloc = virtscsi_target_alloc, |
| .target_destroy = virtscsi_target_destroy, |
| }; |
| |
| static struct scsi_host_template virtscsi_host_template_multi = { |
| .module = THIS_MODULE, |
| .name = "Virtio SCSI HBA", |
| .proc_name = "virtio_scsi", |
| .this_id = -1, |
| .cmd_size = sizeof(struct virtio_scsi_cmd), |
| .queuecommand = virtscsi_queuecommand_multi, |
| .change_queue_depth = virtscsi_change_queue_depth, |
| .eh_abort_handler = virtscsi_abort, |
| .eh_device_reset_handler = virtscsi_device_reset, |
| |
| .can_queue = 1024, |
| .dma_boundary = UINT_MAX, |
| .use_clustering = ENABLE_CLUSTERING, |
| .target_alloc = virtscsi_target_alloc, |
| .target_destroy = virtscsi_target_destroy, |
| }; |
| |
| #define virtscsi_config_get(vdev, fld) \ |
| ({ \ |
| typeof(((struct virtio_scsi_config *)0)->fld) __val; \ |
| virtio_cread(vdev, struct virtio_scsi_config, fld, &__val); \ |
| __val; \ |
| }) |
| |
| #define virtscsi_config_set(vdev, fld, val) \ |
| do { \ |
| typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \ |
| virtio_cwrite(vdev, struct virtio_scsi_config, fld, &__val); \ |
| } while(0) |
| |
| static void __virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) |
| { |
| int i; |
| int cpu; |
| |
| /* In multiqueue mode, when the number of cpu is equal |
| * to the number of request queues, we let the qeueues |
| * to be private to one cpu by setting the affinity hint |
| * to eliminate the contention. |
| */ |
| if ((vscsi->num_queues == 1 || |
| vscsi->num_queues != num_online_cpus()) && affinity) { |
| if (vscsi->affinity_hint_set) |
| affinity = false; |
| else |
| return; |
| } |
| |
| if (affinity) { |
| i = 0; |
| for_each_online_cpu(cpu) { |
| virtqueue_set_affinity(vscsi->req_vqs[i].vq, cpu); |
| i++; |
| } |
| |
| vscsi->affinity_hint_set = true; |
| } else { |
| for (i = 0; i < vscsi->num_queues; i++) { |
| if (!vscsi->req_vqs[i].vq) |
| continue; |
| |
| virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1); |
| } |
| |
| vscsi->affinity_hint_set = false; |
| } |
| } |
| |
| static void virtscsi_set_affinity(struct virtio_scsi *vscsi, bool affinity) |
| { |
| get_online_cpus(); |
| __virtscsi_set_affinity(vscsi, affinity); |
| put_online_cpus(); |
| } |
| |
| static int virtscsi_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| struct virtio_scsi *vscsi = container_of(nfb, struct virtio_scsi, nb); |
| switch(action) { |
| case CPU_ONLINE: |
| case CPU_ONLINE_FROZEN: |
| case CPU_DEAD: |
| case CPU_DEAD_FROZEN: |
| __virtscsi_set_affinity(vscsi, true); |
| break; |
| default: |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq, |
| struct virtqueue *vq) |
| { |
| spin_lock_init(&virtscsi_vq->vq_lock); |
| virtscsi_vq->vq = vq; |
| } |
| |
| static void virtscsi_scan(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *shost = (struct Scsi_Host *)vdev->priv; |
| |
| scsi_scan_host(shost); |
| } |
| |
| static void virtscsi_remove_vqs(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| |
| virtscsi_set_affinity(vscsi, false); |
| |
| /* Stop all the virtqueues. */ |
| vdev->config->reset(vdev); |
| |
| vdev->config->del_vqs(vdev); |
| } |
| |
| static int virtscsi_init(struct virtio_device *vdev, |
| struct virtio_scsi *vscsi) |
| { |
| int err; |
| u32 i; |
| u32 num_vqs; |
| vq_callback_t **callbacks; |
| const char **names; |
| struct virtqueue **vqs; |
| |
| num_vqs = vscsi->num_queues + VIRTIO_SCSI_VQ_BASE; |
| vqs = kmalloc(num_vqs * sizeof(struct virtqueue *), GFP_KERNEL); |
| callbacks = kmalloc(num_vqs * sizeof(vq_callback_t *), GFP_KERNEL); |
| names = kmalloc(num_vqs * sizeof(char *), GFP_KERNEL); |
| |
| if (!callbacks || !vqs || !names) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| callbacks[0] = virtscsi_ctrl_done; |
| callbacks[1] = virtscsi_event_done; |
| names[0] = "control"; |
| names[1] = "event"; |
| for (i = VIRTIO_SCSI_VQ_BASE; i < num_vqs; i++) { |
| callbacks[i] = virtscsi_req_done; |
| names[i] = "request"; |
| } |
| |
| /* Discover virtqueues and write information to configuration. */ |
| err = vdev->config->find_vqs(vdev, num_vqs, vqs, callbacks, names); |
| if (err) |
| goto out; |
| |
| virtscsi_init_vq(&vscsi->ctrl_vq, vqs[0]); |
| virtscsi_init_vq(&vscsi->event_vq, vqs[1]); |
| for (i = VIRTIO_SCSI_VQ_BASE; i < num_vqs; i++) |
| virtscsi_init_vq(&vscsi->req_vqs[i - VIRTIO_SCSI_VQ_BASE], |
| vqs[i]); |
| |
| virtscsi_set_affinity(vscsi, true); |
| |
| virtscsi_config_set(vdev, cdb_size, VIRTIO_SCSI_CDB_SIZE); |
| virtscsi_config_set(vdev, sense_size, VIRTIO_SCSI_SENSE_SIZE); |
| |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) |
| virtscsi_kick_event_all(vscsi); |
| |
| err = 0; |
| |
| out: |
| kfree(names); |
| kfree(callbacks); |
| kfree(vqs); |
| if (err) |
| virtscsi_remove_vqs(vdev); |
| return err; |
| } |
| |
| static int virtscsi_probe(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *shost; |
| struct virtio_scsi *vscsi; |
| int err, host_prot; |
| u32 sg_elems, num_targets; |
| u32 cmd_per_lun; |
| u32 num_queues; |
| struct scsi_host_template *hostt; |
| |
| /* We need to know how many queues before we allocate. */ |
| num_queues = virtscsi_config_get(vdev, num_queues) ? : 1; |
| |
| num_targets = virtscsi_config_get(vdev, max_target) + 1; |
| |
| if (num_queues == 1) |
| hostt = &virtscsi_host_template_single; |
| else |
| hostt = &virtscsi_host_template_multi; |
| |
| shost = scsi_host_alloc(hostt, |
| sizeof(*vscsi) + sizeof(vscsi->req_vqs[0]) * num_queues); |
| if (!shost) |
| return -ENOMEM; |
| |
| sg_elems = virtscsi_config_get(vdev, seg_max) ?: 1; |
| shost->sg_tablesize = sg_elems; |
| vscsi = shost_priv(shost); |
| vscsi->vdev = vdev; |
| vscsi->num_queues = num_queues; |
| vdev->priv = shost; |
| |
| err = virtscsi_init(vdev, vscsi); |
| if (err) |
| goto virtscsi_init_failed; |
| |
| vscsi->nb.notifier_call = &virtscsi_cpu_callback; |
| err = register_hotcpu_notifier(&vscsi->nb); |
| if (err) { |
| pr_err("registering cpu notifier failed\n"); |
| goto scsi_add_host_failed; |
| } |
| |
| cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1; |
| shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue); |
| shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF; |
| |
| /* LUNs > 256 are reported with format 1, so they go in the range |
| * 16640-32767. |
| */ |
| shost->max_lun = virtscsi_config_get(vdev, max_lun) + 1 + 0x4000; |
| shost->max_id = num_targets; |
| shost->max_channel = 0; |
| shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE; |
| |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_T10_PI)) { |
| host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | |
| SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION | |
| SHOST_DIX_TYPE2_PROTECTION | SHOST_DIX_TYPE3_PROTECTION; |
| |
| scsi_host_set_prot(shost, host_prot); |
| scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC); |
| } |
| |
| err = scsi_add_host(shost, &vdev->dev); |
| if (err) |
| goto scsi_add_host_failed; |
| /* |
| * scsi_scan_host() happens in virtscsi_scan() via virtio_driver->scan() |
| * after VIRTIO_CONFIG_S_DRIVER_OK has been set.. |
| */ |
| return 0; |
| |
| scsi_add_host_failed: |
| vdev->config->del_vqs(vdev); |
| virtscsi_init_failed: |
| scsi_host_put(shost); |
| return err; |
| } |
| |
| static void virtscsi_remove(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *shost = virtio_scsi_host(vdev); |
| struct virtio_scsi *vscsi = shost_priv(shost); |
| |
| if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) |
| virtscsi_cancel_event_work(vscsi); |
| |
| scsi_remove_host(shost); |
| |
| unregister_hotcpu_notifier(&vscsi->nb); |
| |
| virtscsi_remove_vqs(vdev); |
| scsi_host_put(shost); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int virtscsi_freeze(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| |
| unregister_hotcpu_notifier(&vscsi->nb); |
| virtscsi_remove_vqs(vdev); |
| return 0; |
| } |
| |
| static int virtscsi_restore(struct virtio_device *vdev) |
| { |
| struct Scsi_Host *sh = virtio_scsi_host(vdev); |
| struct virtio_scsi *vscsi = shost_priv(sh); |
| int err; |
| |
| err = virtscsi_init(vdev, vscsi); |
| if (err) |
| return err; |
| |
| err = register_hotcpu_notifier(&vscsi->nb); |
| if (err) |
| vdev->config->del_vqs(vdev); |
| |
| return err; |
| } |
| #endif |
| |
| static struct virtio_device_id id_table[] = { |
| { VIRTIO_ID_SCSI, VIRTIO_DEV_ANY_ID }, |
| { 0 }, |
| }; |
| |
| static unsigned int features[] = { |
| VIRTIO_SCSI_F_HOTPLUG, |
| VIRTIO_SCSI_F_CHANGE, |
| VIRTIO_SCSI_F_T10_PI, |
| }; |
| |
| static struct virtio_driver virtio_scsi_driver = { |
| .feature_table = features, |
| .feature_table_size = ARRAY_SIZE(features), |
| .driver.name = KBUILD_MODNAME, |
| .driver.owner = THIS_MODULE, |
| .id_table = id_table, |
| .probe = virtscsi_probe, |
| .scan = virtscsi_scan, |
| #ifdef CONFIG_PM_SLEEP |
| .freeze = virtscsi_freeze, |
| .restore = virtscsi_restore, |
| #endif |
| .remove = virtscsi_remove, |
| }; |
| |
| static int __init init(void) |
| { |
| int ret = -ENOMEM; |
| |
| virtscsi_cmd_cache = KMEM_CACHE(virtio_scsi_cmd, 0); |
| if (!virtscsi_cmd_cache) { |
| pr_err("kmem_cache_create() for virtscsi_cmd_cache failed\n"); |
| goto error; |
| } |
| |
| |
| virtscsi_cmd_pool = |
| mempool_create_slab_pool(VIRTIO_SCSI_MEMPOOL_SZ, |
| virtscsi_cmd_cache); |
| if (!virtscsi_cmd_pool) { |
| pr_err("mempool_create() for virtscsi_cmd_pool failed\n"); |
| goto error; |
| } |
| ret = register_virtio_driver(&virtio_scsi_driver); |
| if (ret < 0) |
| goto error; |
| |
| return 0; |
| |
| error: |
| if (virtscsi_cmd_pool) { |
| mempool_destroy(virtscsi_cmd_pool); |
| virtscsi_cmd_pool = NULL; |
| } |
| if (virtscsi_cmd_cache) { |
| kmem_cache_destroy(virtscsi_cmd_cache); |
| virtscsi_cmd_cache = NULL; |
| } |
| return ret; |
| } |
| |
| static void __exit fini(void) |
| { |
| unregister_virtio_driver(&virtio_scsi_driver); |
| mempool_destroy(virtscsi_cmd_pool); |
| kmem_cache_destroy(virtscsi_cmd_cache); |
| } |
| module_init(init); |
| module_exit(fini); |
| |
| MODULE_DEVICE_TABLE(virtio, id_table); |
| MODULE_DESCRIPTION("Virtio SCSI HBA driver"); |
| MODULE_LICENSE("GPL"); |