| |
| /* |
| * The Capture code for Fujitsu M-5MOLS ISP |
| * |
| * Copyright (C) 2011 Samsung Electronics Co., Ltd. |
| * Author: HeungJun Kim <riverful.kim@samsung.com> |
| * |
| * Copyright (C) 2009 Samsung Electronics Co., Ltd. |
| * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| #include <media/m5mols.h> |
| #include <media/s5p_fimc.h> |
| |
| #include "m5mols.h" |
| #include "m5mols_reg.h" |
| |
| /** |
| * m5mols_read_rational - I2C read of a rational number |
| * |
| * Read numerator and denominator from registers @addr_num and @addr_den |
| * respectively and return the division result in @val. |
| */ |
| static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, |
| u32 addr_den, u32 *val) |
| { |
| u32 num, den; |
| |
| int ret = m5mols_read_u32(sd, addr_num, &num); |
| if (!ret) |
| ret = m5mols_read_u32(sd, addr_den, &den); |
| if (ret) |
| return ret; |
| *val = den == 0 ? 0 : num / den; |
| return ret; |
| } |
| |
| /** |
| * m5mols_capture_info - Gather captured image information |
| * |
| * For now it gathers only EXIF information and file size. |
| */ |
| static int m5mols_capture_info(struct m5mols_info *info) |
| { |
| struct m5mols_exif *exif = &info->cap.exif; |
| struct v4l2_subdev *sd = &info->sd; |
| int ret; |
| |
| ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU, |
| EXIF_INFO_EXPTIME_DE, &exif->exposure_time); |
| if (ret) |
| return ret; |
| ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE, |
| &exif->shutter_speed); |
| if (ret) |
| return ret; |
| ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE, |
| &exif->aperture); |
| if (ret) |
| return ret; |
| ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE, |
| &exif->brightness); |
| if (ret) |
| return ret; |
| ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE, |
| &exif->exposure_bias); |
| if (ret) |
| return ret; |
| |
| ret = m5mols_read_u16(sd, EXIF_INFO_ISO, &exif->iso_speed); |
| if (!ret) |
| ret = m5mols_read_u16(sd, EXIF_INFO_FLASH, &exif->flash); |
| if (!ret) |
| ret = m5mols_read_u16(sd, EXIF_INFO_SDR, &exif->sdr); |
| if (!ret) |
| ret = m5mols_read_u16(sd, EXIF_INFO_QVAL, &exif->qval); |
| if (ret) |
| return ret; |
| |
| if (!ret) |
| ret = m5mols_read_u32(sd, CAPC_IMAGE_SIZE, &info->cap.main); |
| if (!ret) |
| ret = m5mols_read_u32(sd, CAPC_THUMB_SIZE, &info->cap.thumb); |
| if (!ret) |
| info->cap.total = info->cap.main + info->cap.thumb; |
| |
| return ret; |
| } |
| |
| int m5mols_start_capture(struct m5mols_info *info) |
| { |
| unsigned int framesize = info->cap.buf_size - M5MOLS_JPEG_TAGS_SIZE; |
| struct v4l2_subdev *sd = &info->sd; |
| int ret; |
| |
| /* |
| * Synchronize the controls, set the capture frame resolution and color |
| * format. The frame capture is initiated during switching from Monitor |
| * to Capture mode. |
| */ |
| ret = m5mols_set_mode(info, REG_MONITOR); |
| if (!ret) |
| ret = m5mols_restore_controls(info); |
| if (!ret) |
| ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG); |
| if (!ret) |
| ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, info->resolution); |
| if (!ret) |
| ret = m5mols_write(sd, CAPP_JPEG_SIZE_MAX, framesize); |
| if (!ret) |
| ret = m5mols_set_mode(info, REG_CAPTURE); |
| if (!ret) |
| /* Wait until a frame is captured to ISP internal memory */ |
| ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); |
| if (ret) |
| return ret; |
| |
| /* |
| * Initiate the captured data transfer to a MIPI-CSI receiver. |
| */ |
| ret = m5mols_write(sd, CAPC_SEL_FRAME, 1); |
| if (!ret) |
| ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN); |
| if (!ret) { |
| bool captured = false; |
| unsigned int size; |
| |
| /* Wait for the capture completion interrupt */ |
| ret = m5mols_wait_interrupt(sd, REG_INT_CAPTURE, 2000); |
| if (!ret) { |
| captured = true; |
| ret = m5mols_capture_info(info); |
| } |
| size = captured ? info->cap.main : 0; |
| v4l2_dbg(1, m5mols_debug, sd, "%s: size: %d, thumb.: %d B\n", |
| __func__, size, info->cap.thumb); |
| |
| v4l2_subdev_notify(sd, S5P_FIMC_TX_END_NOTIFY, &size); |
| } |
| |
| return ret; |
| } |