| /* |
| * Freescale eSDHC i.MX controller driver for the platform bus. |
| * |
| * derived from the OF-version. |
| * |
| * Copyright (c) 2010 Pengutronix e.K. |
| * Author: Wolfram Sang <w.sang@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/sdhci-pltfm.h> |
| #include "sdhci.h" |
| #include "sdhci-pltfm.h" |
| #include "sdhci-esdhc.h" |
| |
| static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) |
| { |
| void __iomem *base = host->ioaddr + (reg & ~0x3); |
| u32 shift = (reg & 0x3) * 8; |
| |
| writel(((readl(base) & ~(mask << shift)) | (val << shift)), base); |
| } |
| |
| static u16 esdhc_readw_le(struct sdhci_host *host, int reg) |
| { |
| if (unlikely(reg == SDHCI_HOST_VERSION)) |
| reg ^= 2; |
| |
| return readw(host->ioaddr + reg); |
| } |
| |
| static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| switch (reg) { |
| case SDHCI_TRANSFER_MODE: |
| /* |
| * Postpone this write, we must do it together with a |
| * command write that is down below. |
| */ |
| pltfm_host->scratchpad = val; |
| return; |
| case SDHCI_COMMAND: |
| writel(val << 16 | pltfm_host->scratchpad, |
| host->ioaddr + SDHCI_TRANSFER_MODE); |
| return; |
| case SDHCI_BLOCK_SIZE: |
| val &= ~SDHCI_MAKE_BLKSZ(0x7, 0); |
| break; |
| } |
| esdhc_clrset_le(host, 0xffff, val, reg); |
| } |
| |
| static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) |
| { |
| u32 new_val; |
| |
| switch (reg) { |
| case SDHCI_POWER_CONTROL: |
| /* |
| * FSL put some DMA bits here |
| * If your board has a regulator, code should be here |
| */ |
| return; |
| case SDHCI_HOST_CONTROL: |
| /* FSL messed up here, so we can just keep those two */ |
| new_val = val & (SDHCI_CTRL_LED | SDHCI_CTRL_4BITBUS); |
| /* ensure the endianess */ |
| new_val |= ESDHC_HOST_CONTROL_LE; |
| /* DMA mode bits are shifted */ |
| new_val |= (val & SDHCI_CTRL_DMA_MASK) << 5; |
| |
| esdhc_clrset_le(host, 0xffff, new_val, reg); |
| return; |
| } |
| esdhc_clrset_le(host, 0xff, val, reg); |
| } |
| |
| static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| return clk_get_rate(pltfm_host->clk); |
| } |
| |
| static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| return clk_get_rate(pltfm_host->clk) / 256 / 16; |
| } |
| |
| static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pdata) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct clk *clk; |
| |
| clk = clk_get(mmc_dev(host->mmc), NULL); |
| if (IS_ERR(clk)) { |
| dev_err(mmc_dev(host->mmc), "clk err\n"); |
| return PTR_ERR(clk); |
| } |
| clk_enable(clk); |
| pltfm_host->clk = clk; |
| |
| return 0; |
| } |
| |
| static void esdhc_pltfm_exit(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| |
| clk_disable(pltfm_host->clk); |
| clk_put(pltfm_host->clk); |
| } |
| |
| static struct sdhci_ops sdhci_esdhc_ops = { |
| .read_w = esdhc_readw_le, |
| .write_w = esdhc_writew_le, |
| .write_b = esdhc_writeb_le, |
| .set_clock = esdhc_set_clock, |
| .get_max_clock = esdhc_pltfm_get_max_clock, |
| .get_min_clock = esdhc_pltfm_get_min_clock, |
| }; |
| |
| struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { |
| .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK |
| | SDHCI_QUIRK_BROKEN_ADMA, |
| /* ADMA has issues. Might be fixable */ |
| /* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */ |
| .ops = &sdhci_esdhc_ops, |
| .init = esdhc_pltfm_init, |
| .exit = esdhc_pltfm_exit, |
| }; |