| /* |
| * arch/s390/kernel/head64.S |
| * |
| * Copyright (C) IBM Corp. 1999,2006 |
| * |
| * Author(s): Hartmut Penner <hp@de.ibm.com> |
| * Martin Schwidefsky <schwidefsky@de.ibm.com> |
| * Rob van der Heij <rvdhei@iae.nl> |
| * Heiko Carstens <heiko.carstens@de.ibm.com> |
| * |
| */ |
| |
| # |
| # startup-code at 0x10000, running in absolute addressing mode |
| # this is called either by the ipl loader or directly by PSW restart |
| # or linload or SALIPL |
| # |
| .org 0x10000 |
| startup:basr %r13,0 # get base |
| .LPG0: l %r13,0f-.LPG0(%r13) |
| b 0(%r13) |
| 0: .long startup_continue |
| |
| # |
| # params at 10400 (setup.h) |
| # |
| .org PARMAREA |
| .quad 0 # IPL_DEVICE |
| .quad 0 # INITRD_START |
| .quad 0 # INITRD_SIZE |
| |
| .org COMMAND_LINE |
| .byte "root=/dev/ram0 ro" |
| .byte 0 |
| |
| .org 0x11000 |
| |
| startup_continue: |
| basr %r13,0 # get base |
| .LPG1: sll %r13,1 # remove high order bit |
| srl %r13,1 |
| |
| #ifdef CONFIG_ZFCPDUMP |
| |
| # check if we have been ipled using zfcp dump: |
| |
| tm 0xb9,0x01 # test if subchannel is enabled |
| jno .nodump # subchannel disabled |
| l %r1,0xb8 |
| la %r5,.Lipl_schib-.LPG1(%r13) |
| stsch 0(%r5) # get schib of subchannel |
| jne .nodump # schib not available |
| tm 5(%r5),0x01 # devno valid? |
| jno .nodump |
| tm 4(%r5),0x80 # qdio capable device? |
| jno .nodump |
| l %r2,20(%r0) # address of ipl parameter block |
| lhi %r3,0 |
| ic %r3,0x148(%r2) # get opt field |
| chi %r3,0x20 # load with dump? |
| jne .nodump |
| |
| # store all prefix registers in case of load with dump: |
| |
| la %r7,0 # base register for 0 page |
| la %r8,0 # first cpu |
| l %r11,.Lpref_arr_ptr-.LPG1(%r13) # address of prefix array |
| ahi %r11,4 # skip boot cpu |
| lr %r12,%r11 |
| ahi %r12,(CONFIG_NR_CPUS*4) # end of prefix array |
| stap .Lcurrent_cpu+2-.LPG1(%r13) # store current cpu addr |
| 1: |
| cl %r8,.Lcurrent_cpu-.LPG1(%r13) # is ipl cpu ? |
| je 4f # if yes get next cpu |
| 2: |
| lr %r9,%r7 |
| sigp %r9,%r8,0x9 # stop & store status of cpu |
| brc 8,3f # accepted |
| brc 4,4f # status stored: next cpu |
| brc 2,2b # busy: try again |
| brc 1,4f # not op: next cpu |
| 3: |
| mvc 0(4,%r11),264(%r7) # copy prefix register to prefix array |
| ahi %r11,4 # next element in prefix array |
| clr %r11,%r12 |
| je 5f # no more space in prefix array |
| 4: |
| ahi %r8,1 # next cpu (r8 += 1) |
| cl %r8,.Llast_cpu-.LPG1(%r13) # is last possible cpu ? |
| jl 1b # jump if not last cpu |
| 5: |
| lhi %r1,2 # mode 2 = esame (dump) |
| j 6f |
| .align 4 |
| .Lipl_schib: |
| .rept 13 |
| .long 0 |
| .endr |
| .nodump: |
| lhi %r1,1 # mode 1 = esame (normal ipl) |
| 6: |
| #else |
| lhi %r1,1 # mode 1 = esame (normal ipl) |
| #endif /* CONFIG_ZFCPDUMP */ |
| mvi __LC_AR_MODE_ID,1 # set esame flag |
| slr %r0,%r0 # set cpuid to zero |
| sigp %r1,%r0,0x12 # switch to esame mode |
| sam64 # switch to 64 bit mode |
| lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers |
| lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area |
| # move IPL device to lowcore |
| mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12) |
| # |
| # Setup stack |
| # |
| larl %r15,init_thread_union |
| lg %r14,__TI_task(%r15) # cache current in lowcore |
| stg %r14,__LC_CURRENT |
| aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE |
| stg %r15,__LC_KERNEL_STACK # set end of kernel stack |
| aghi %r15,-160 |
| xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain |
| # |
| # Save ipl parameters, clear bss memory, initialize storage key for kernel pages, |
| # and create a kernel NSS if the SAVESYS= parm is defined |
| # |
| brasl %r14,startup_init |
| # set program check new psw mask |
| mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) |
| larl %r12,machine_flags |
| # |
| # find out if we have the MVPG instruction |
| # |
| la %r1,0f-.LPG1(%r13) # set program check address |
| stg %r1,__LC_PGM_NEW_PSW+8 |
| sgr %r0,%r0 |
| lghi %r1,0 |
| lghi %r2,0 |
| mvpg %r1,%r2 # test MVPG instruction |
| oi 7(%r12),16 # set MVPG flag |
| 0: |
| |
| # |
| # find out if the diag 0x44 works in 64 bit mode |
| # |
| la %r1,0f-.LPG1(%r13) # set program check address |
| stg %r1,__LC_PGM_NEW_PSW+8 |
| diag 0,0,0x44 # test diag 0x44 |
| oi 7(%r12),32 # set diag44 flag |
| 0: |
| |
| # |
| # find out if we have the IDTE instruction |
| # |
| la %r1,0f-.LPG1(%r13) # set program check address |
| stg %r1,__LC_PGM_NEW_PSW+8 |
| .long 0xb2b10000 # store facility list |
| tm 0xc8,0x08 # check bit for clearing-by-ASCE |
| bno 0f-.LPG1(%r13) |
| lhi %r1,2048 |
| lhi %r2,0 |
| .long 0xb98e2001 |
| oi 7(%r12),0x80 # set IDTE flag |
| 0: |
| |
| # |
| # find out if the diag 0x9c is available |
| # |
| la %r1,0f-.LPG1(%r13) # set program check address |
| stg %r1,__LC_PGM_NEW_PSW+8 |
| stap __LC_CPUID+4 # store cpu address |
| lh %r1,__LC_CPUID+4 |
| diag %r1,0,0x9c # test diag 0x9c |
| oi 6(%r12),1 # set diag9c flag |
| 0: |
| |
| # |
| # find out if we have the MVCOS instruction |
| # |
| la %r1,0f-.LPG1(%r13) # set program check address |
| stg %r1,__LC_PGM_NEW_PSW+8 |
| .short 0xc800 # mvcos 0(%r0),0(%r0),%r0 |
| .short 0x0000 |
| .short 0x0000 |
| 0: tm 0x8f,0x13 # special-operation exception? |
| bno 1f-.LPG1(%r13) # if yes, MVCOS is present |
| oi 6(%r12),2 # set MVCOS flag |
| 1: |
| |
| lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, |
| # virtual and never return ... |
| .align 16 |
| .Lentry:.quad 0x0000000180000000,_stext |
| .Lctl: .quad 0x04b50002 # cr0: various things |
| .quad 0 # cr1: primary space segment table |
| .quad .Lduct # cr2: dispatchable unit control table |
| .quad 0 # cr3: instruction authorization |
| .quad 0 # cr4: instruction authorization |
| .quad .Lduct # cr5: primary-aste origin |
| .quad 0 # cr6: I/O interrupts |
| .quad 0 # cr7: secondary space segment table |
| .quad 0 # cr8: access registers translation |
| .quad 0 # cr9: tracing off |
| .quad 0 # cr10: tracing off |
| .quad 0 # cr11: tracing off |
| .quad 0 # cr12: tracing off |
| .quad 0 # cr13: home space segment table |
| .quad 0xc0000000 # cr14: machine check handling off |
| .quad 0 # cr15: linkage stack operations |
| .Lpcmsk:.quad 0x0000000180000000 |
| .L4malign:.quad 0xffffffffffc00000 |
| .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 |
| .Lnop: .long 0x07000700 |
| #ifdef CONFIG_ZFCPDUMP |
| .Lcurrent_cpu: |
| .long 0x0 |
| .Llast_cpu: |
| .long 0x0000ffff |
| .Lpref_arr_ptr: |
| .long zfcpdump_prefix_array |
| #endif /* CONFIG_ZFCPDUMP */ |
| .Lparmaddr: |
| .quad PARMAREA |
| .align 64 |
| .Lduct: .long 0,0,0,0,.Lduald,0,0,0 |
| .long 0,0,0,0,0,0,0,0 |
| .align 128 |
| .Lduald:.rept 8 |
| .long 0x80000000,0,0,0 # invalid access-list entries |
| .endr |
| |
| .org 0x12000 |
| .globl _ehead |
| _ehead: |
| #ifdef CONFIG_SHARED_KERNEL |
| .org 0x100000 |
| #endif |
| |
| # |
| # startup-code, running in absolute addressing mode |
| # |
| .globl _stext |
| _stext: basr %r13,0 # get base |
| .LPG3: |
| # check control registers |
| stctg %c0,%c15,0(%r15) |
| oi 6(%r15),0x40 # enable sigp emergency signal |
| oi 4(%r15),0x10 # switch on low address proctection |
| lctlg %c0,%c15,0(%r15) |
| |
| lam 0,15,.Laregs-.LPG3(%r13) # load acrs needed by uaccess |
| brasl %r14,start_kernel # go to C code |
| # |
| # We returned from start_kernel ?!? PANIK |
| # |
| basr %r13,0 |
| lpswe .Ldw-.(%r13) # load disabled wait psw |
| |
| .align 8 |
| .Ldw: .quad 0x0002000180000000,0x0000000000000000 |
| .Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 |