| #ifndef _ASM_POWERPC_PCI_BRIDGE_H |
| #define _ASM_POWERPC_PCI_BRIDGE_H |
| #ifdef __KERNEL__ |
| /* |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/pci.h> |
| #include <linux/list.h> |
| #include <linux/ioport.h> |
| |
| struct device_node; |
| |
| extern unsigned int ppc_pci_flags; |
| enum { |
| /* Force re-assigning all resources (ignore firmware |
| * setup completely) |
| */ |
| PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001, |
| |
| /* Re-assign all bus numbers */ |
| PPC_PCI_REASSIGN_ALL_BUS = 0x00000002, |
| |
| /* Do not try to assign, just use existing setup */ |
| PPC_PCI_PROBE_ONLY = 0x00000004, |
| |
| /* Don't bother with ISA alignment unless the bridge has |
| * ISA forwarding enabled |
| */ |
| PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008, |
| |
| /* Enable domain numbers in /proc */ |
| PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010, |
| /* ... except for domain 0 */ |
| PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020, |
| }; |
| |
| |
| /* |
| * Structure of a PCI controller (host bridge) |
| */ |
| struct pci_controller { |
| struct pci_bus *bus; |
| char is_dynamic; |
| #ifdef CONFIG_PPC64 |
| int node; |
| #endif |
| struct device_node *dn; |
| struct list_head list_node; |
| struct device *parent; |
| |
| int first_busno; |
| int last_busno; |
| #ifndef CONFIG_PPC64 |
| int self_busno; |
| #endif |
| |
| void __iomem *io_base_virt; |
| #ifdef CONFIG_PPC64 |
| void *io_base_alloc; |
| #endif |
| resource_size_t io_base_phys; |
| #ifndef CONFIG_PPC64 |
| resource_size_t pci_io_size; |
| #endif |
| |
| /* Some machines (PReP) have a non 1:1 mapping of |
| * the PCI memory space in the CPU bus space |
| */ |
| resource_size_t pci_mem_offset; |
| #ifdef CONFIG_PPC64 |
| unsigned long pci_io_size; |
| #endif |
| |
| /* Some machines have a special region to forward the ISA |
| * "memory" cycles such as VGA memory regions. Left to 0 |
| * if unsupported |
| */ |
| resource_size_t isa_mem_phys; |
| resource_size_t isa_mem_size; |
| |
| struct pci_ops *ops; |
| unsigned int __iomem *cfg_addr; |
| void __iomem *cfg_data; |
| |
| #ifndef CONFIG_PPC64 |
| /* |
| * Used for variants of PCI indirect handling and possible quirks: |
| * SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1 |
| * EXT_REG - provides access to PCI-e extended registers |
| * SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS |
| * on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS |
| * to determine which bus number to match on when generating type0 |
| * config cycles |
| * NO_PCIE_LINK - the Freescale PCI-e controllers have issues with |
| * hanging if we don't have link and try to do config cycles to |
| * anything but the PHB. Only allow talking to the PHB if this is |
| * set. |
| * BIG_ENDIAN - cfg_addr is a big endian register |
| * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on |
| * the PLB4. Effectively disable MRM commands by setting this. |
| */ |
| #define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 |
| #define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 |
| #define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 |
| #define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 |
| #define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 |
| #define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 |
| u32 indirect_type; |
| #endif /* !CONFIG_PPC64 */ |
| /* Currently, we limit ourselves to 1 IO range and 3 mem |
| * ranges since the common pci_bus structure can't handle more |
| */ |
| struct resource io_resource; |
| struct resource mem_resources[3]; |
| int global_number; /* PCI domain number */ |
| #ifdef CONFIG_PPC64 |
| unsigned long buid; |
| unsigned long dma_window_base_cur; |
| unsigned long dma_window_size; |
| |
| void *private_data; |
| #endif /* CONFIG_PPC64 */ |
| }; |
| |
| #ifndef CONFIG_PPC64 |
| |
| static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) |
| { |
| return bus->sysdata; |
| } |
| |
| static inline int isa_vaddr_is_ioport(void __iomem *address) |
| { |
| /* No specific ISA handling on ppc32 at this stage, it |
| * all goes through PCI |
| */ |
| return 0; |
| } |
| |
| /* These are used for config access before all the PCI probing |
| has been done. */ |
| extern int early_read_config_byte(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u8 *val); |
| extern int early_read_config_word(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u16 *val); |
| extern int early_read_config_dword(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u32 *val); |
| extern int early_write_config_byte(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u8 val); |
| extern int early_write_config_word(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u16 val); |
| extern int early_write_config_dword(struct pci_controller *hose, int bus, |
| int dev_fn, int where, u32 val); |
| |
| extern int early_find_capability(struct pci_controller *hose, int bus, |
| int dev_fn, int cap); |
| |
| extern void setup_indirect_pci(struct pci_controller* hose, |
| resource_size_t cfg_addr, |
| resource_size_t cfg_data, u32 flags); |
| extern void setup_grackle(struct pci_controller *hose); |
| #else /* CONFIG_PPC64 */ |
| |
| /* |
| * PCI stuff, for nodes representing PCI devices, pointed to |
| * by device_node->data. |
| */ |
| struct iommu_table; |
| |
| struct pci_dn { |
| int busno; /* pci bus number */ |
| int devfn; /* pci device and function number */ |
| |
| struct pci_controller *phb; /* for pci devices */ |
| struct iommu_table *iommu_table; /* for phb's or bridges */ |
| struct device_node *node; /* back-pointer to the device_node */ |
| |
| int pci_ext_config_space; /* for pci devices */ |
| |
| #ifdef CONFIG_EEH |
| struct pci_dev *pcidev; /* back-pointer to the pci device */ |
| int class_code; /* pci device class */ |
| int eeh_mode; /* See eeh.h for possible EEH_MODEs */ |
| int eeh_config_addr; |
| int eeh_pe_config_addr; /* new-style partition endpoint address */ |
| int eeh_check_count; /* # times driver ignored error */ |
| int eeh_freeze_count; /* # times this device froze up. */ |
| int eeh_false_positives; /* # times this device reported #ff's */ |
| u32 config_space[16]; /* saved PCI config space */ |
| #endif |
| }; |
| |
| /* Get the pointer to a device_node's pci_dn */ |
| #define PCI_DN(dn) ((struct pci_dn *) (dn)->data) |
| |
| extern struct device_node *fetch_dev_dn(struct pci_dev *dev); |
| |
| /* Get a device_node from a pci_dev. This code must be fast except |
| * in the case where the sysdata is incorrect and needs to be fixed |
| * up (this will only happen once). |
| * In this case the sysdata will have been inherited from a PCI host |
| * bridge or a PCI-PCI bridge further up the tree, so it will point |
| * to a valid struct pci_dn, just not the one we want. |
| */ |
| static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev) |
| { |
| struct device_node *dn = dev->sysdata; |
| struct pci_dn *pdn = dn->data; |
| |
| if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number) |
| return dn; /* fast path. sysdata is good */ |
| return fetch_dev_dn(dev); |
| } |
| |
| static inline int pci_device_from_OF_node(struct device_node *np, |
| u8 *bus, u8 *devfn) |
| { |
| if (!PCI_DN(np)) |
| return -ENODEV; |
| *bus = PCI_DN(np)->busno; |
| *devfn = PCI_DN(np)->devfn; |
| return 0; |
| } |
| |
| static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) |
| { |
| if (bus->self) |
| return pci_device_to_OF_node(bus->self); |
| else |
| return bus->sysdata; /* Must be root bus (PHB) */ |
| } |
| |
| /** Find the bus corresponding to the indicated device node */ |
| extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn); |
| |
| /** Remove all of the PCI devices under this bus */ |
| extern void pcibios_remove_pci_devices(struct pci_bus *bus); |
| |
| /** Discover new pci devices under this bus, and add them */ |
| extern void pcibios_add_pci_devices(struct pci_bus *bus); |
| extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); |
| |
| extern int pcibios_remove_root_bus(struct pci_controller *phb); |
| |
| static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) |
| { |
| struct device_node *busdn = bus->sysdata; |
| |
| BUG_ON(busdn == NULL); |
| return PCI_DN(busdn)->phb; |
| } |
| |
| |
| extern void isa_bridge_find_early(struct pci_controller *hose); |
| |
| static inline int isa_vaddr_is_ioport(void __iomem *address) |
| { |
| /* Check if address hits the reserved legacy IO range */ |
| unsigned long ea = (unsigned long)address; |
| return ea >= ISA_IO_BASE && ea < ISA_IO_END; |
| } |
| |
| extern int pcibios_unmap_io_space(struct pci_bus *bus); |
| extern int pcibios_map_io_space(struct pci_bus *bus); |
| |
| /* Return values for ppc_md.pci_probe_mode function */ |
| #define PCI_PROBE_NONE -1 /* Don't look at this bus at all */ |
| #define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */ |
| #define PCI_PROBE_DEVTREE 1 /* Instantiate from device tree */ |
| |
| #ifdef CONFIG_NUMA |
| #define PHB_SET_NODE(PHB, NODE) ((PHB)->node = (NODE)) |
| #else |
| #define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1) |
| #endif |
| |
| #endif /* CONFIG_PPC64 */ |
| |
| /* Get the PCI host controller for an OF device */ |
| extern struct pci_controller *pci_find_hose_for_OF_device( |
| struct device_node* node); |
| |
| /* Fill up host controller resources from the OF node */ |
| extern void pci_process_bridge_OF_ranges(struct pci_controller *hose, |
| struct device_node *dev, int primary); |
| |
| /* Allocate & free a PCI host bridge structure */ |
| extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev); |
| extern void pcibios_free_controller(struct pci_controller *phb); |
| |
| #ifdef CONFIG_PCI |
| extern unsigned long pci_address_to_pio(phys_addr_t address); |
| extern int pcibios_vaddr_is_ioport(void __iomem *address); |
| #else |
| static inline unsigned long pci_address_to_pio(phys_addr_t address) |
| { |
| return (unsigned long)-1; |
| } |
| static inline int pcibios_vaddr_is_ioport(void __iomem *address) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| #endif /* __KERNEL__ */ |
| #endif /* _ASM_POWERPC_PCI_BRIDGE_H */ |