| /* |
| * UHCI-specific debugging code. Invaluable when something |
| * goes wrong, but don't get in my face. |
| * |
| * Kernel visible pointers are surrounded in []s and bus |
| * visible pointers are surrounded in ()s |
| * |
| * (C) Copyright 1999 Linus Torvalds |
| * (C) Copyright 1999-2001 Johannes Erdfelt |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/kernel.h> |
| #include <linux/debugfs.h> |
| #include <asm/io.h> |
| |
| #include "uhci-hcd.h" |
| |
| static struct dentry *uhci_debugfs_root; |
| |
| #ifdef DEBUG |
| |
| /* Handle REALLY large printks so we don't overflow buffers */ |
| static void lprintk(char *buf) |
| { |
| char *p; |
| |
| /* Just write one line at a time */ |
| while (buf) { |
| p = strchr(buf, '\n'); |
| if (p) |
| *p = 0; |
| printk(KERN_DEBUG "%s\n", buf); |
| buf = p; |
| if (buf) |
| buf++; |
| } |
| } |
| |
| static int uhci_show_td(struct uhci_hcd *uhci, struct uhci_td *td, char *buf, |
| int len, int space) |
| { |
| char *out = buf; |
| char *spid; |
| u32 status, token; |
| |
| /* Try to make sure there's enough memory */ |
| if (len < 160) |
| return 0; |
| |
| status = td_status(uhci, td); |
| out += sprintf(out, "%*s[%p] link (%08x) ", space, "", td, |
| hc32_to_cpu(uhci, td->link)); |
| out += sprintf(out, "e%d %s%s%s%s%s%s%s%s%s%sLength=%x ", |
| ((status >> 27) & 3), |
| (status & TD_CTRL_SPD) ? "SPD " : "", |
| (status & TD_CTRL_LS) ? "LS " : "", |
| (status & TD_CTRL_IOC) ? "IOC " : "", |
| (status & TD_CTRL_ACTIVE) ? "Active " : "", |
| (status & TD_CTRL_STALLED) ? "Stalled " : "", |
| (status & TD_CTRL_DBUFERR) ? "DataBufErr " : "", |
| (status & TD_CTRL_BABBLE) ? "Babble " : "", |
| (status & TD_CTRL_NAK) ? "NAK " : "", |
| (status & TD_CTRL_CRCTIMEO) ? "CRC/Timeo " : "", |
| (status & TD_CTRL_BITSTUFF) ? "BitStuff " : "", |
| status & 0x7ff); |
| |
| token = td_token(uhci, td); |
| switch (uhci_packetid(token)) { |
| case USB_PID_SETUP: |
| spid = "SETUP"; |
| break; |
| case USB_PID_OUT: |
| spid = "OUT"; |
| break; |
| case USB_PID_IN: |
| spid = "IN"; |
| break; |
| default: |
| spid = "?"; |
| break; |
| } |
| |
| out += sprintf(out, "MaxLen=%x DT%d EndPt=%x Dev=%x, PID=%x(%s) ", |
| token >> 21, |
| ((token >> 19) & 1), |
| (token >> 15) & 15, |
| (token >> 8) & 127, |
| (token & 0xff), |
| spid); |
| out += sprintf(out, "(buf=%08x)\n", hc32_to_cpu(uhci, td->buffer)); |
| |
| return out - buf; |
| } |
| |
| static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, |
| char *buf, int len, int space) |
| { |
| char *out = buf; |
| struct uhci_td *td; |
| int i, nactive, ninactive; |
| char *ptype; |
| |
| if (len < 200) |
| return 0; |
| |
| out += sprintf(out, "urb_priv [%p] ", urbp); |
| out += sprintf(out, "urb [%p] ", urbp->urb); |
| out += sprintf(out, "qh [%p] ", urbp->qh); |
| out += sprintf(out, "Dev=%d ", usb_pipedevice(urbp->urb->pipe)); |
| out += sprintf(out, "EP=%x(%s) ", usb_pipeendpoint(urbp->urb->pipe), |
| (usb_pipein(urbp->urb->pipe) ? "IN" : "OUT")); |
| |
| switch (usb_pipetype(urbp->urb->pipe)) { |
| case PIPE_ISOCHRONOUS: ptype = "ISO"; break; |
| case PIPE_INTERRUPT: ptype = "INT"; break; |
| case PIPE_BULK: ptype = "BLK"; break; |
| default: |
| case PIPE_CONTROL: ptype = "CTL"; break; |
| } |
| |
| out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : "")); |
| out += sprintf(out, " Actlen=%d%s", urbp->urb->actual_length, |
| (urbp->qh->type == USB_ENDPOINT_XFER_CONTROL ? |
| "-8" : "")); |
| |
| if (urbp->urb->unlinked) |
| out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked); |
| out += sprintf(out, "\n"); |
| |
| i = nactive = ninactive = 0; |
| list_for_each_entry(td, &urbp->td_list, list) { |
| if (urbp->qh->type != USB_ENDPOINT_XFER_ISOC && |
| (++i <= 10 || debug > 2)) { |
| out += sprintf(out, "%*s%d: ", space + 2, "", i); |
| out += uhci_show_td(uhci, td, out, |
| len - (out - buf), 0); |
| } else { |
| if (td_status(uhci, td) & TD_CTRL_ACTIVE) |
| ++nactive; |
| else |
| ++ninactive; |
| } |
| } |
| if (nactive + ninactive > 0) |
| out += sprintf(out, "%*s[skipped %d inactive and %d active " |
| "TDs]\n", |
| space, "", ninactive, nactive); |
| |
| return out - buf; |
| } |
| |
| static int uhci_show_qh(struct uhci_hcd *uhci, |
| struct uhci_qh *qh, char *buf, int len, int space) |
| { |
| char *out = buf; |
| int i, nurbs; |
| __hc32 element = qh_element(qh); |
| char *qtype; |
| |
| /* Try to make sure there's enough memory */ |
| if (len < 80 * 7) |
| return 0; |
| |
| switch (qh->type) { |
| case USB_ENDPOINT_XFER_ISOC: qtype = "ISO"; break; |
| case USB_ENDPOINT_XFER_INT: qtype = "INT"; break; |
| case USB_ENDPOINT_XFER_BULK: qtype = "BLK"; break; |
| case USB_ENDPOINT_XFER_CONTROL: qtype = "CTL"; break; |
| default: qtype = "Skel" ; break; |
| } |
| |
| out += sprintf(out, "%*s[%p] %s QH link (%08x) element (%08x)\n", |
| space, "", qh, qtype, |
| hc32_to_cpu(uhci, qh->link), |
| hc32_to_cpu(uhci, element)); |
| if (qh->type == USB_ENDPOINT_XFER_ISOC) |
| out += sprintf(out, "%*s period %d phase %d load %d us, " |
| "frame %x desc [%p]\n", |
| space, "", qh->period, qh->phase, qh->load, |
| qh->iso_frame, qh->iso_packet_desc); |
| else if (qh->type == USB_ENDPOINT_XFER_INT) |
| out += sprintf(out, "%*s period %d phase %d load %d us\n", |
| space, "", qh->period, qh->phase, qh->load); |
| |
| if (element & UHCI_PTR_QH(uhci)) |
| out += sprintf(out, "%*s Element points to QH (bug?)\n", space, ""); |
| |
| if (element & UHCI_PTR_DEPTH(uhci)) |
| out += sprintf(out, "%*s Depth traverse\n", space, ""); |
| |
| if (element & cpu_to_hc32(uhci, 8)) |
| out += sprintf(out, "%*s Bit 3 set (bug?)\n", space, ""); |
| |
| if (!(element & ~(UHCI_PTR_QH(uhci) | UHCI_PTR_DEPTH(uhci)))) |
| out += sprintf(out, "%*s Element is NULL (bug?)\n", space, ""); |
| |
| if (list_empty(&qh->queue)) { |
| out += sprintf(out, "%*s queue is empty\n", space, ""); |
| if (qh == uhci->skel_async_qh) |
| out += uhci_show_td(uhci, uhci->term_td, out, |
| len - (out - buf), 0); |
| } else { |
| struct urb_priv *urbp = list_entry(qh->queue.next, |
| struct urb_priv, node); |
| struct uhci_td *td = list_entry(urbp->td_list.next, |
| struct uhci_td, list); |
| |
| if (element != LINK_TO_TD(uhci, td)) |
| out += sprintf(out, "%*s Element != First TD\n", |
| space, ""); |
| i = nurbs = 0; |
| list_for_each_entry(urbp, &qh->queue, node) { |
| if (++i <= 10) |
| out += uhci_show_urbp(uhci, urbp, out, |
| len - (out - buf), space + 2); |
| else |
| ++nurbs; |
| } |
| if (nurbs > 0) |
| out += sprintf(out, "%*s Skipped %d URBs\n", |
| space, "", nurbs); |
| } |
| |
| if (qh->dummy_td) { |
| out += sprintf(out, "%*s Dummy TD\n", space, ""); |
| out += uhci_show_td(uhci, qh->dummy_td, out, |
| len - (out - buf), 0); |
| } |
| |
| return out - buf; |
| } |
| |
| static int uhci_show_sc(int port, unsigned short status, char *buf, int len) |
| { |
| char *out = buf; |
| |
| /* Try to make sure there's enough memory */ |
| if (len < 160) |
| return 0; |
| |
| out += sprintf(out, " stat%d = %04x %s%s%s%s%s%s%s%s%s%s\n", |
| port, |
| status, |
| (status & USBPORTSC_SUSP) ? " Suspend" : "", |
| (status & USBPORTSC_OCC) ? " OverCurrentChange" : "", |
| (status & USBPORTSC_OC) ? " OverCurrent" : "", |
| (status & USBPORTSC_PR) ? " Reset" : "", |
| (status & USBPORTSC_LSDA) ? " LowSpeed" : "", |
| (status & USBPORTSC_RD) ? " ResumeDetect" : "", |
| (status & USBPORTSC_PEC) ? " EnableChange" : "", |
| (status & USBPORTSC_PE) ? " Enabled" : "", |
| (status & USBPORTSC_CSC) ? " ConnectChange" : "", |
| (status & USBPORTSC_CCS) ? " Connected" : ""); |
| |
| return out - buf; |
| } |
| |
| static int uhci_show_root_hub_state(struct uhci_hcd *uhci, char *buf, int len) |
| { |
| char *out = buf; |
| char *rh_state; |
| |
| /* Try to make sure there's enough memory */ |
| if (len < 60) |
| return 0; |
| |
| switch (uhci->rh_state) { |
| case UHCI_RH_RESET: |
| rh_state = "reset"; break; |
| case UHCI_RH_SUSPENDED: |
| rh_state = "suspended"; break; |
| case UHCI_RH_AUTO_STOPPED: |
| rh_state = "auto-stopped"; break; |
| case UHCI_RH_RESUMING: |
| rh_state = "resuming"; break; |
| case UHCI_RH_SUSPENDING: |
| rh_state = "suspending"; break; |
| case UHCI_RH_RUNNING: |
| rh_state = "running"; break; |
| case UHCI_RH_RUNNING_NODEVS: |
| rh_state = "running, no devs"; break; |
| default: |
| rh_state = "?"; break; |
| } |
| out += sprintf(out, "Root-hub state: %s FSBR: %d\n", |
| rh_state, uhci->fsbr_is_on); |
| return out - buf; |
| } |
| |
| static int uhci_show_status(struct uhci_hcd *uhci, char *buf, int len) |
| { |
| char *out = buf; |
| unsigned short usbcmd, usbstat, usbint, usbfrnum; |
| unsigned int flbaseadd; |
| unsigned char sof; |
| unsigned short portsc1, portsc2; |
| |
| /* Try to make sure there's enough memory */ |
| if (len < 80 * 9) |
| return 0; |
| |
| usbcmd = uhci_readw(uhci, 0); |
| usbstat = uhci_readw(uhci, 2); |
| usbint = uhci_readw(uhci, 4); |
| usbfrnum = uhci_readw(uhci, 6); |
| flbaseadd = uhci_readl(uhci, 8); |
| sof = uhci_readb(uhci, 12); |
| portsc1 = uhci_readw(uhci, 16); |
| portsc2 = uhci_readw(uhci, 18); |
| |
| out += sprintf(out, " usbcmd = %04x %s%s%s%s%s%s%s%s\n", |
| usbcmd, |
| (usbcmd & USBCMD_MAXP) ? "Maxp64 " : "Maxp32 ", |
| (usbcmd & USBCMD_CF) ? "CF " : "", |
| (usbcmd & USBCMD_SWDBG) ? "SWDBG " : "", |
| (usbcmd & USBCMD_FGR) ? "FGR " : "", |
| (usbcmd & USBCMD_EGSM) ? "EGSM " : "", |
| (usbcmd & USBCMD_GRESET) ? "GRESET " : "", |
| (usbcmd & USBCMD_HCRESET) ? "HCRESET " : "", |
| (usbcmd & USBCMD_RS) ? "RS " : ""); |
| |
| out += sprintf(out, " usbstat = %04x %s%s%s%s%s%s\n", |
| usbstat, |
| (usbstat & USBSTS_HCH) ? "HCHalted " : "", |
| (usbstat & USBSTS_HCPE) ? "HostControllerProcessError " : "", |
| (usbstat & USBSTS_HSE) ? "HostSystemError " : "", |
| (usbstat & USBSTS_RD) ? "ResumeDetect " : "", |
| (usbstat & USBSTS_ERROR) ? "USBError " : "", |
| (usbstat & USBSTS_USBINT) ? "USBINT " : ""); |
| |
| out += sprintf(out, " usbint = %04x\n", usbint); |
| out += sprintf(out, " usbfrnum = (%d)%03x\n", (usbfrnum >> 10) & 1, |
| 0xfff & (4*(unsigned int)usbfrnum)); |
| out += sprintf(out, " flbaseadd = %08x\n", flbaseadd); |
| out += sprintf(out, " sof = %02x\n", sof); |
| out += uhci_show_sc(1, portsc1, out, len - (out - buf)); |
| out += uhci_show_sc(2, portsc2, out, len - (out - buf)); |
| out += sprintf(out, "Most recent frame: %x (%d) " |
| "Last ISO frame: %x (%d)\n", |
| uhci->frame_number, uhci->frame_number & 1023, |
| uhci->last_iso_frame, uhci->last_iso_frame & 1023); |
| |
| return out - buf; |
| } |
| |
| static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len) |
| { |
| char *out = buf; |
| int i, j; |
| struct uhci_qh *qh; |
| struct uhci_td *td; |
| struct list_head *tmp, *head; |
| int nframes, nerrs; |
| __hc32 link; |
| __hc32 fsbr_link; |
| |
| static const char * const qh_names[] = { |
| "unlink", "iso", "int128", "int64", "int32", "int16", |
| "int8", "int4", "int2", "async", "term" |
| }; |
| |
| out += uhci_show_root_hub_state(uhci, out, len - (out - buf)); |
| out += sprintf(out, "HC status\n"); |
| out += uhci_show_status(uhci, out, len - (out - buf)); |
| |
| out += sprintf(out, "Periodic load table\n"); |
| for (i = 0; i < MAX_PHASE; ++i) { |
| out += sprintf(out, "\t%d", uhci->load[i]); |
| if (i % 8 == 7) |
| *out++ = '\n'; |
| } |
| out += sprintf(out, "Total: %d, #INT: %d, #ISO: %d\n", |
| uhci->total_load, |
| uhci_to_hcd(uhci)->self.bandwidth_int_reqs, |
| uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs); |
| if (debug <= 1) |
| return out - buf; |
| |
| out += sprintf(out, "Frame List\n"); |
| nframes = 10; |
| nerrs = 0; |
| for (i = 0; i < UHCI_NUMFRAMES; ++i) { |
| __hc32 qh_dma; |
| |
| j = 0; |
| td = uhci->frame_cpu[i]; |
| link = uhci->frame[i]; |
| if (!td) |
| goto check_link; |
| |
| if (nframes > 0) { |
| out += sprintf(out, "- Frame %d -> (%08x)\n", |
| i, hc32_to_cpu(uhci, link)); |
| j = 1; |
| } |
| |
| head = &td->fl_list; |
| tmp = head; |
| do { |
| td = list_entry(tmp, struct uhci_td, fl_list); |
| tmp = tmp->next; |
| if (link != LINK_TO_TD(uhci, td)) { |
| if (nframes > 0) |
| out += sprintf(out, " link does " |
| "not match list entry!\n"); |
| else |
| ++nerrs; |
| } |
| if (nframes > 0) |
| out += uhci_show_td(uhci, td, out, |
| len - (out - buf), 4); |
| link = td->link; |
| } while (tmp != head); |
| |
| check_link: |
| qh_dma = uhci_frame_skel_link(uhci, i); |
| if (link != qh_dma) { |
| if (nframes > 0) { |
| if (!j) { |
| out += sprintf(out, |
| "- Frame %d -> (%08x)\n", |
| i, hc32_to_cpu(uhci, link)); |
| j = 1; |
| } |
| out += sprintf(out, " link does not match " |
| "QH (%08x)!\n", |
| hc32_to_cpu(uhci, qh_dma)); |
| } else |
| ++nerrs; |
| } |
| nframes -= j; |
| } |
| if (nerrs > 0) |
| out += sprintf(out, "Skipped %d bad links\n", nerrs); |
| |
| out += sprintf(out, "Skeleton QHs\n"); |
| |
| fsbr_link = 0; |
| for (i = 0; i < UHCI_NUM_SKELQH; ++i) { |
| int cnt = 0; |
| |
| qh = uhci->skelqh[i]; |
| out += sprintf(out, "- skel_%s_qh\n", qh_names[i]); \ |
| out += uhci_show_qh(uhci, qh, out, len - (out - buf), 4); |
| |
| /* Last QH is the Terminating QH, it's different */ |
| if (i == SKEL_TERM) { |
| if (qh_element(qh) != LINK_TO_TD(uhci, uhci->term_td)) |
| out += sprintf(out, " skel_term_qh element is not set to term_td!\n"); |
| link = fsbr_link; |
| if (!link) |
| link = LINK_TO_QH(uhci, uhci->skel_term_qh); |
| goto check_qh_link; |
| } |
| |
| head = &qh->node; |
| tmp = head->next; |
| |
| while (tmp != head) { |
| qh = list_entry(tmp, struct uhci_qh, node); |
| tmp = tmp->next; |
| if (++cnt <= 10) |
| out += uhci_show_qh(uhci, qh, out, |
| len - (out - buf), 4); |
| if (!fsbr_link && qh->skel >= SKEL_FSBR) |
| fsbr_link = LINK_TO_QH(uhci, qh); |
| } |
| if ((cnt -= 10) > 0) |
| out += sprintf(out, " Skipped %d QHs\n", cnt); |
| |
| link = UHCI_PTR_TERM(uhci); |
| if (i <= SKEL_ISO) |
| ; |
| else if (i < SKEL_ASYNC) |
| link = LINK_TO_QH(uhci, uhci->skel_async_qh); |
| else if (!uhci->fsbr_is_on) |
| ; |
| else |
| link = LINK_TO_QH(uhci, uhci->skel_term_qh); |
| check_qh_link: |
| if (qh->link != link) |
| out += sprintf(out, " last QH not linked to next skeleton!\n"); |
| } |
| |
| return out - buf; |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| #define MAX_OUTPUT (64 * 1024) |
| |
| struct uhci_debug { |
| int size; |
| char *data; |
| }; |
| |
| static int uhci_debug_open(struct inode *inode, struct file *file) |
| { |
| struct uhci_hcd *uhci = inode->i_private; |
| struct uhci_debug *up; |
| unsigned long flags; |
| |
| up = kmalloc(sizeof(*up), GFP_KERNEL); |
| if (!up) |
| return -ENOMEM; |
| |
| up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL); |
| if (!up->data) { |
| kfree(up); |
| return -ENOMEM; |
| } |
| |
| up->size = 0; |
| spin_lock_irqsave(&uhci->lock, flags); |
| if (uhci->is_initialized) |
| up->size = uhci_sprint_schedule(uhci, up->data, MAX_OUTPUT); |
| spin_unlock_irqrestore(&uhci->lock, flags); |
| |
| file->private_data = up; |
| |
| return 0; |
| } |
| |
| static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) |
| { |
| struct uhci_debug *up; |
| loff_t new = -1; |
| |
| up = file->private_data; |
| |
| /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */ |
| switch (whence) { |
| case 0: |
| new = off; |
| break; |
| case 1: |
| new = file->f_pos + off; |
| break; |
| } |
| |
| if (new < 0 || new > up->size) |
| return -EINVAL; |
| |
| return (file->f_pos = new); |
| } |
| |
| static ssize_t uhci_debug_read(struct file *file, char __user *buf, |
| size_t nbytes, loff_t *ppos) |
| { |
| struct uhci_debug *up = file->private_data; |
| return simple_read_from_buffer(buf, nbytes, ppos, up->data, up->size); |
| } |
| |
| static int uhci_debug_release(struct inode *inode, struct file *file) |
| { |
| struct uhci_debug *up = file->private_data; |
| |
| kfree(up->data); |
| kfree(up); |
| |
| return 0; |
| } |
| |
| static const struct file_operations uhci_debug_operations = { |
| .owner = THIS_MODULE, |
| .open = uhci_debug_open, |
| .llseek = uhci_debug_lseek, |
| .read = uhci_debug_read, |
| .release = uhci_debug_release, |
| }; |
| #define UHCI_DEBUG_OPS |
| |
| #endif /* CONFIG_DEBUG_FS */ |
| |
| #else /* DEBUG */ |
| |
| static inline void lprintk(char *buf) |
| {} |
| |
| static inline int uhci_show_qh(struct uhci_hcd *uhci, |
| struct uhci_qh *qh, char *buf, int len, int space) |
| { |
| return 0; |
| } |
| |
| static inline int uhci_sprint_schedule(struct uhci_hcd *uhci, |
| char *buf, int len) |
| { |
| return 0; |
| } |
| |
| #endif |