drivers/net/wireless/prism54/isl_38xx.c - kernel/msm-4.9 - Gitiles

 /*
  *
  *  Copyright (C) 2002 Intersil Americas Inc.
  *  Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */

 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/delay.h>

 #include <asm/uaccess.h>
 #include <asm/io.h>

 #include "prismcompat.h"
 #include "isl_38xx.h"
 #include "islpci_dev.h"
 #include "islpci_mgt.h"

 /******************************************************************************
     Device Interface & Control functions
 ******************************************************************************/

 /**
  * isl38xx_disable_interrupts - disable all interrupts
  * @device: pci memory base address
  *
  *  Instructs the device to disable all interrupt reporting by asserting
  *  the IRQ line. New events may still show up in the interrupt identification
  *  register located at offset %ISL38XX_INT_IDENT_REG.
  */
 void
 isl38xx_disable_interrupts(void __iomem *device)
 {
 	isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);
 }

 void
 isl38xx_handle_sleep_request(isl38xx_control_block *control_block,
 			     int *powerstate, void __iomem *device_base)
 {
 	/* device requests to go into sleep mode
 	 * check whether the transmit queues for data and management are empty */
 	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ))
 		/* data tx queue not empty */
 		return;

 	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
 		/* management tx queue not empty */
 		return;

 	/* check also whether received frames are pending */
 	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ))
 		/* data rx queue not empty */
 		return;

 	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ))
 		/* management rx queue not empty */
 		return;

 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_TRACING, "Device going to sleep mode\n");
 #endif

 	/* all queues are empty, allow the device to go into sleep mode */
 	*powerstate = ISL38XX_PSM_POWERSAVE_STATE;

 	/* assert the Sleep interrupt in the Device Interrupt Register */
 	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP,
 			  ISL38XX_DEV_INT_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);
 }

 void
 isl38xx_handle_wakeup(isl38xx_control_block *control_block,
 		      int *powerstate, void __iomem *device_base)
 {
 	/* device is in active state, update the powerstate flag */
 	*powerstate = ISL38XX_PSM_ACTIVE_STATE;

 	/* now check whether there are frames pending for the card */
 	if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)
 	    && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
 		return;

 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n");
 #endif

 	/* either data or management transmit queue has a frame pending
 	 * trigger the device by setting the Update bit in the Device Int reg */
 	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
 			  ISL38XX_DEV_INT_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);
 }

 void
 isl38xx_trigger_device(int asleep, void __iomem *device_base)
 {
 	u32 reg;

 #if VERBOSE > SHOW_ERROR_MESSAGES
 	u32 counter = 0;
 	struct timeval current_time;
 	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
 #endif

 	/* check whether the device is in power save mode */
 	if (asleep) {
 		/* device is in powersave, trigger the device for wakeup */
 #if VERBOSE > SHOW_ERROR_MESSAGES
 		do_gettimeofday(&current_time);
 		DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n",
 		      current_time.tv_sec, (long)current_time.tv_usec);

 		DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
 		      current_time.tv_sec, (long)current_time.tv_usec,
 		      readl(device_base + ISL38XX_CTRL_STAT_REG));
 #endif

 		reg = readl(device_base + ISL38XX_INT_IDENT_REG);
 		if (reg == 0xabadface) {
 #if VERBOSE > SHOW_ERROR_MESSAGES
 			do_gettimeofday(&current_time);
 			DEBUG(SHOW_TRACING,
 			      "%08li.%08li Device register abadface\n",
 			      current_time.tv_sec, (long)current_time.tv_usec);
 #endif
 			/* read the Device Status Register until Sleepmode bit is set */
 			while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
 			       (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) {
 				udelay(ISL38XX_WRITEIO_DELAY);
 #if VERBOSE > SHOW_ERROR_MESSAGES
 				counter++;
 #endif
 			}

 #if VERBOSE > SHOW_ERROR_MESSAGES
 			DEBUG(SHOW_TRACING,
 			      "%08li.%08li Device register read %08x\n",
 			      current_time.tv_sec, (long)current_time.tv_usec,
 			      readl(device_base + ISL38XX_CTRL_STAT_REG));
 			do_gettimeofday(&current_time);
 			DEBUG(SHOW_TRACING,
 			      "%08li.%08li Device asleep counter %i\n",
 			      current_time.tv_sec, (long)current_time.tv_usec,
 			      counter);
 #endif
 		}
 		/* assert the Wakeup interrupt in the Device Interrupt Register */
 		isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
 				  ISL38XX_DEV_INT_REG);

 #if VERBOSE > SHOW_ERROR_MESSAGES
 		udelay(ISL38XX_WRITEIO_DELAY);

 		/* perform another read on the Device Status Register */
 		reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
 		do_gettimeofday(&current_time);
 		DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
 		      current_time.tv_sec, (long)current_time.tv_usec, reg);
 #endif
 	} else {
 		/* device is (still) awake  */
 #if VERBOSE > SHOW_ERROR_MESSAGES
 		DEBUG(SHOW_TRACING, "Device is in active state\n");
 #endif
 		/* trigger the device by setting the Update bit in the Device Int reg */

 		isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
 				  ISL38XX_DEV_INT_REG);
 	}
 }

 void
 isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address)
 {
 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n");
 #endif

 	/* load the address of the control block in the device */
 	isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);

 	/* set the reset bit in the Device Interrupt Register */
 	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);

 	/* enable the interrupt for detecting initialization */

 	/* Note: Do not enable other interrupts here. We want the
 	 * device to have come up first 100% before allowing any other
 	 * interrupts. */
 	isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);  /* allow complete full reset */
 }

 void
 isl38xx_enable_common_interrupts(void __iomem *device_base) {
 	u32 reg;
 	reg = ( ISL38XX_INT_IDENT_UPDATE |
 			ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP);
 	isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
 	udelay(ISL38XX_WRITEIO_DELAY);
 }

 int
 isl38xx_in_queue(isl38xx_control_block *cb, int queue)
 {
 	const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) -
 			   le32_to_cpu(cb->device_curr_frag[queue]));

 	/* determine the amount of fragments in the queue depending on the type
 	 * of the queue, either transmit or receive */

 	BUG_ON(delta < 0);	/* driver ptr must be ahead of device ptr */

 	switch (queue) {
 		/* send queues */
 	case ISL38XX_CB_TX_MGMTQ:
 		BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
 	case ISL38XX_CB_TX_DATA_LQ:
 	case ISL38XX_CB_TX_DATA_HQ:
 		BUG_ON(delta > ISL38XX_CB_TX_QSIZE);
 		return delta;
 		break;

 		/* receive queues */
 	case ISL38XX_CB_RX_MGMTQ:
 		BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
 		return ISL38XX_CB_MGMT_QSIZE - delta;
 		break;

 	case ISL38XX_CB_RX_DATA_LQ:
 	case ISL38XX_CB_RX_DATA_HQ:
 		BUG_ON(delta > ISL38XX_CB_RX_QSIZE);
 		return ISL38XX_CB_RX_QSIZE - delta;
 		break;
 	}
 	BUG();
 	return 0;
 }
	/*
	*
	* Copyright (C) 2002 Intersil Americas Inc.
	* Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	*/

	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/delay.h>

	#include <asm/uaccess.h>
	#include <asm/io.h>

	#include "prismcompat.h"
	#include "isl_38xx.h"
	#include "islpci_dev.h"
	#include "islpci_mgt.h"

	/******************************************************************************
	Device Interface & Control functions
	******************************************************************************/

	/**
	* isl38xx_disable_interrupts - disable all interrupts
	* @device: pci memory base address
	*
	* Instructs the device to disable all interrupt reporting by asserting
	* the IRQ line. New events may still show up in the interrupt identification
	* register located at offset %ISL38XX_INT_IDENT_REG.
	*/
	void
	isl38xx_disable_interrupts(void __iomem *device)
	{
	isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG);
	udelay(ISL38XX_WRITEIO_DELAY);
	}

	void
	isl38xx_handle_sleep_request(isl38xx_control_block *control_block,
	int powerstate, void __iomem device_base)
	{
	/* device requests to go into sleep mode
	* check whether the transmit queues for data and management are empty */
	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ))
	/* data tx queue not empty */
	return;

	if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
	/* management tx queue not empty */
	return;

	/* check also whether received frames are pending */
	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ))
	/* data rx queue not empty */
	return;

	if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ))
	/* management rx queue not empty */
	return;

	#if VERBOSE > SHOW_ERROR_MESSAGES
	DEBUG(SHOW_TRACING, "Device going to sleep mode\n");
	#endif

	/* all queues are empty, allow the device to go into sleep mode */
	*powerstate = ISL38XX_PSM_POWERSAVE_STATE;

	/* assert the Sleep interrupt in the Device Interrupt Register */
	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP,
	ISL38XX_DEV_INT_REG);
	udelay(ISL38XX_WRITEIO_DELAY);
	}

	void
	isl38xx_handle_wakeup(isl38xx_control_block *control_block,
	int powerstate, void __iomem device_base)
	{
	/* device is in active state, update the powerstate flag */
	*powerstate = ISL38XX_PSM_ACTIVE_STATE;

	/* now check whether there are frames pending for the card */
	if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)
	&& !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
	return;

	#if VERBOSE > SHOW_ERROR_MESSAGES
	DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n");
	#endif

	/* either data or management transmit queue has a frame pending
	* trigger the device by setting the Update bit in the Device Int reg */
	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
	ISL38XX_DEV_INT_REG);
	udelay(ISL38XX_WRITEIO_DELAY);
	}

	void
	isl38xx_trigger_device(int asleep, void __iomem *device_base)
	{
	u32 reg;

	#if VERBOSE > SHOW_ERROR_MESSAGES
	u32 counter = 0;
	struct timeval current_time;
	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
	#endif

	/* check whether the device is in power save mode */
	if (asleep) {
	/* device is in powersave, trigger the device for wakeup */
	#if VERBOSE > SHOW_ERROR_MESSAGES
	do_gettimeofday(&current_time);
	DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n",
	current_time.tv_sec, (long)current_time.tv_usec);

	DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
	current_time.tv_sec, (long)current_time.tv_usec,
	readl(device_base + ISL38XX_CTRL_STAT_REG));
	#endif

	reg = readl(device_base + ISL38XX_INT_IDENT_REG);
	if (reg == 0xabadface) {
	#if VERBOSE > SHOW_ERROR_MESSAGES
	do_gettimeofday(&current_time);
	DEBUG(SHOW_TRACING,
	"%08li.%08li Device register abadface\n",
	current_time.tv_sec, (long)current_time.tv_usec);
	#endif
	/* read the Device Status Register until Sleepmode bit is set */
	while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
	(reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) {
	udelay(ISL38XX_WRITEIO_DELAY);
	#if VERBOSE > SHOW_ERROR_MESSAGES
	counter++;
	#endif
	}

	#if VERBOSE > SHOW_ERROR_MESSAGES
	DEBUG(SHOW_TRACING,
	"%08li.%08li Device register read %08x\n",
	current_time.tv_sec, (long)current_time.tv_usec,
	readl(device_base + ISL38XX_CTRL_STAT_REG));
	do_gettimeofday(&current_time);
	DEBUG(SHOW_TRACING,
	"%08li.%08li Device asleep counter %i\n",
	current_time.tv_sec, (long)current_time.tv_usec,
	counter);
	#endif
	}
	/* assert the Wakeup interrupt in the Device Interrupt Register */
	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
	ISL38XX_DEV_INT_REG);

	#if VERBOSE > SHOW_ERROR_MESSAGES
	udelay(ISL38XX_WRITEIO_DELAY);

	/* perform another read on the Device Status Register */
	reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
	do_gettimeofday(&current_time);
	DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
	current_time.tv_sec, (long)current_time.tv_usec, reg);
	#endif
	} else {
	/* device is (still) awake */
	#if VERBOSE > SHOW_ERROR_MESSAGES
	DEBUG(SHOW_TRACING, "Device is in active state\n");
	#endif
	/* trigger the device by setting the Update bit in the Device Int reg */

	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
	ISL38XX_DEV_INT_REG);
	}
	}

	void
	isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address)
	{
	#if VERBOSE > SHOW_ERROR_MESSAGES
	DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n");
	#endif

	/* load the address of the control block in the device */
	isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG);
	udelay(ISL38XX_WRITEIO_DELAY);

	/* set the reset bit in the Device Interrupt Register */
	isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG);
	udelay(ISL38XX_WRITEIO_DELAY);

	/* enable the interrupt for detecting initialization */

	/* Note: Do not enable other interrupts here. We want the
	* device to have come up first 100% before allowing any other
	* interrupts. */
	isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG);
	udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */
	}

	void
	isl38xx_enable_common_interrupts(void __iomem *device_base) {
	u32 reg;
	reg = ( ISL38XX_INT_IDENT_UPDATE \|
	ISL38XX_INT_IDENT_SLEEP \| ISL38XX_INT_IDENT_WAKEUP);
	isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
	udelay(ISL38XX_WRITEIO_DELAY);
	}

	int
	isl38xx_in_queue(isl38xx_control_block *cb, int queue)
	{
	const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) -
	le32_to_cpu(cb->device_curr_frag[queue]));

	/* determine the amount of fragments in the queue depending on the type
	* of the queue, either transmit or receive */

	BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */

	switch (queue) {
	/* send queues */
	case ISL38XX_CB_TX_MGMTQ:
	BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
	case ISL38XX_CB_TX_DATA_LQ:
	case ISL38XX_CB_TX_DATA_HQ:
	BUG_ON(delta > ISL38XX_CB_TX_QSIZE);
	return delta;
	break;

	/* receive queues */
	case ISL38XX_CB_RX_MGMTQ:
	BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
	return ISL38XX_CB_MGMT_QSIZE - delta;
	break;

	case ISL38XX_CB_RX_DATA_LQ:
	case ISL38XX_CB_RX_DATA_HQ:
	BUG_ON(delta > ISL38XX_CB_RX_QSIZE);
	return ISL38XX_CB_RX_QSIZE - delta;
	break;
	}
	BUG();
	return 0;
	}