| # |
| # Makefile for the linux kernel. |
| # |
| |
| # Common support (must be linked before board specific support) |
| obj-y += clock.o devices.o generic.o irq.o \ |
| time.o reset.o |
| obj-$(CONFIG_PM) += pm.o sleep.o standby.o |
| |
| ifeq ($(CONFIG_CPU_FREQ),y) |
| obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o |
| obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o |
| obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o |
| endif |
| |
| # Generic drivers that other drivers may depend upon |
| |
| # SoC-specific code |
| obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o |
| obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o |
| obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o |
| obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o |
| obj-$(CONFIG_CPU_PXA300) += pxa300.o |
| obj-$(CONFIG_CPU_PXA320) += pxa320.o |
| obj-$(CONFIG_CPU_PXA930) += pxa930.o |
| |
| # NOTE: keep the order of boards in accordance to their order in Kconfig |
| |
| # Intel/Marvell Dev Platforms |
| obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o |
| obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o |
| obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o |
| obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o |
| obj-$(CONFIG_MACH_LITTLETON) += littleton.o |
| obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o |
| obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o |
| obj-$(CONFIG_MACH_SAAR) += saar.o |
| obj-$(CONFIG_MACH_SAARB) += saarb.o |
| |
| # 3rd Party Dev Platforms |
| obj-$(CONFIG_ARCH_PXA_IDP) += idp.o |
| obj-$(CONFIG_ARCH_VIPER) += viper.o |
| obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o |
| obj-$(CONFIG_MACH_BALLOON3) += balloon3.o |
| obj-$(CONFIG_MACH_CSB726) += csb726.o |
| obj-$(CONFIG_CSB726_CSB701) += csb701.o |
| obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx.o cm-x255.o cm-x270.o |
| ifeq ($(CONFIG_PCI),y) |
| obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o |
| endif |
| obj-$(CONFIG_MACH_EM_X270) += em-x270.o |
| obj-$(CONFIG_MACH_CM_X300) += cm-x300.o |
| obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o |
| obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o |
| obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o |
| obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o |
| obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o |
| obj-$(CONFIG_MACH_STARGATE2) += stargate2.o |
| obj-$(CONFIG_MACH_XCEP) += xcep.o |
| obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o |
| obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o |
| obj-$(CONFIG_MACH_PCM027) += pcm027.o |
| obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o |
| obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o |
| obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o |
| obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o |
| obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o |
| obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o |
| obj-$(CONFIG_MACH_VPAC270) += vpac270.o |
| |
| # End-user Products |
| obj-$(CONFIG_MACH_H4700) += hx4700.o |
| obj-$(CONFIG_MACH_H5000) += h5000.o |
| obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o |
| obj-$(CONFIG_MACH_MAGICIAN) += magician.o |
| obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o |
| obj-$(CONFIG_PXA_EZX) += ezx.o |
| obj-$(CONFIG_MACH_MP900C) += mp900.o |
| obj-$(CONFIG_MACH_PALMTE2) += palmte2.o |
| obj-$(CONFIG_MACH_PALMTC) += palmtc.o |
| obj-$(CONFIG_MACH_PALM27X) += palm27x.o |
| obj-$(CONFIG_MACH_PALMT5) += palmt5.o |
| obj-$(CONFIG_MACH_PALMTX) += palmtx.o |
| obj-$(CONFIG_MACH_PALMZ72) += palmz72.o |
| obj-$(CONFIG_MACH_PALMLD) += palmld.o |
| obj-$(CONFIG_PALM_TREO) += palmtreo.o |
| obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o |
| obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o |
| obj-$(CONFIG_MACH_POODLE) += poodle.o |
| obj-$(CONFIG_MACH_TOSA) += tosa.o |
| obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o |
| obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o |
| obj-$(CONFIG_MACH_RAUMFELD_RC) += raumfeld.o |
| obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o |
| obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o |
| obj-$(CONFIG_MACH_ZIPIT2) += z2.o |
| |
| # Support for blinky lights |
| led-y := leds.o |
| led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o |
| led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o |
| led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o |
| |
| obj-$(CONFIG_LEDS) += $(led-y) |
| |
| obj-$(CONFIG_TOSA_BT) += tosa-bt.o |