drivers/cpufreq/imx6q-cpufreq.c - kernel/msm-4.9 - Gitiles

 /*
  * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>

 #define PU_SOC_VOLTAGE_NORMAL	1250000
 #define PU_SOC_VOLTAGE_HIGH	1275000
 #define FREQ_1P2_GHZ		1200000000

 static struct regulator *arm_reg;
 static struct regulator *pu_reg;
 static struct regulator *soc_reg;

 static struct clk *arm_clk;
 static struct clk *pll1_sys_clk;
 static struct clk *pll1_sw_clk;
 static struct clk *step_clk;
 static struct clk *pll2_pfd2_396m_clk;

 /* clk used by i.MX6UL */
 static struct clk *pll2_bus_clk;
 static struct clk *secondary_sel_clk;

 static struct device *cpu_dev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int transition_latency;

 static u32 *imx6_soc_volt;
 static u32 soc_opp_count;

 static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
 	struct dev_pm_opp *opp;
 	unsigned long freq_hz, volt, volt_old;
 	unsigned int old_freq, new_freq;
 	int ret;

 	new_freq = freq_table[index].frequency;
 	freq_hz = new_freq * 1000;
 	old_freq = clk_get_rate(arm_clk) / 1000;

 	rcu_read_lock();
 	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
 	if (IS_ERR(opp)) {
 		rcu_read_unlock();
 		dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
 		return PTR_ERR(opp);
 	}

 	volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	volt_old = regulator_get_voltage(arm_reg);

 	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
 		old_freq / 1000, volt_old / 1000,
 		new_freq / 1000, volt / 1000);

 	/* scaling up?  scale voltage before frequency */
 	if (new_freq > old_freq) {
 		if (!IS_ERR(pu_reg)) {
 			ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
 			if (ret) {
 				dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
 				return ret;
 			}
 		}
 		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
 		if (ret) {
 			dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
 			return ret;
 		}
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_err(cpu_dev,
 				"failed to scale vddarm up: %d\n", ret);
 			return ret;
 		}
 	}

 	/*
 	 * The setpoints are selected per PLL/PDF frequencies, so we need to
 	 * reprogram PLL for frequency scaling.  The procedure of reprogramming
 	 * PLL1 is as below.
 	 * For i.MX6UL, it has a secondary clk mux, the cpu frequency change
 	 * flow is slightly different from other i.MX6 OSC.
 	 * The cpu frequeny change flow for i.MX6(except i.MX6UL) is as below:
 	 *  - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it
 	 *  - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
 	 *  - Disable pll2_pfd2_396m_clk
 	 */
 	if (of_machine_is_compatible("fsl,imx6ul")) {
 		/*
 		 * When changing pll1_sw_clk's parent to pll1_sys_clk,
 		 * CPU may run at higher than 528MHz, this will lead to
 		 * the system unstable if the voltage is lower than the
 		 * voltage of 528MHz, so lower the CPU frequency to one
 		 * half before changing CPU frequency.
 		 */
 		clk_set_rate(arm_clk, (old_freq >> 1) * 1000);
 		clk_set_parent(pll1_sw_clk, pll1_sys_clk);
 		if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk))
 			clk_set_parent(secondary_sel_clk, pll2_bus_clk);
 		else
 			clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk);
 		clk_set_parent(step_clk, secondary_sel_clk);
 		clk_set_parent(pll1_sw_clk, step_clk);
 	} else {
 		clk_set_parent(step_clk, pll2_pfd2_396m_clk);
 		clk_set_parent(pll1_sw_clk, step_clk);
 		if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
 			clk_set_rate(pll1_sys_clk, new_freq * 1000);
 			clk_set_parent(pll1_sw_clk, pll1_sys_clk);
 		}
 	}

 	/* Ensure the arm clock divider is what we expect */
 	ret = clk_set_rate(arm_clk, new_freq * 1000);
 	if (ret) {
 		dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
 		regulator_set_voltage_tol(arm_reg, volt_old, 0);
 		return ret;
 	}

 	/* scaling down?  scale voltage after frequency */
 	if (new_freq < old_freq) {
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_warn(cpu_dev,
 				 "failed to scale vddarm down: %d\n", ret);
 			ret = 0;
 		}
 		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
 		if (ret) {
 			dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
 			ret = 0;
 		}
 		if (!IS_ERR(pu_reg)) {
 			ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
 			if (ret) {
 				dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
 				ret = 0;
 			}
 		}
 	}

 	return 0;
 }

 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
 	policy->clk = arm_clk;
 	return cpufreq_generic_init(policy, freq_table, transition_latency);
 }

 static struct cpufreq_driver imx6q_cpufreq_driver = {
 	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
 	.name = "imx6q-cpufreq",
 	.attr = cpufreq_generic_attr,
 };

 static int imx6q_cpufreq_probe(struct platform_device *pdev)
 {
 	struct device_node *np;
 	struct dev_pm_opp *opp;
 	unsigned long min_volt, max_volt;
 	int num, ret;
 	const struct property *prop;
 	const __be32 *val;
 	u32 nr, i, j;

 	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
 		pr_err("failed to get cpu0 device\n");
 		return -ENODEV;
 	}

 	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		dev_err(cpu_dev, "failed to find cpu0 node\n");
 		return -ENOENT;
 	}

 	arm_clk = clk_get(cpu_dev, "arm");
 	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
 	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
 	step_clk = clk_get(cpu_dev, "step");
 	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
 	if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
 	    IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
 		dev_err(cpu_dev, "failed to get clocks\n");
 		ret = -ENOENT;
 		goto put_clk;
 	}

 	if (of_machine_is_compatible("fsl,imx6ul")) {
 		pll2_bus_clk = clk_get(cpu_dev, "pll2_bus");
 		secondary_sel_clk = clk_get(cpu_dev, "secondary_sel");
 		if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) {
 			dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n");
 			ret = -ENOENT;
 			goto put_clk;
 		}
 	}

 	arm_reg = regulator_get(cpu_dev, "arm");
 	pu_reg = regulator_get_optional(cpu_dev, "pu");
 	soc_reg = regulator_get(cpu_dev, "soc");
 	if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) {
 		dev_err(cpu_dev, "failed to get regulators\n");
 		ret = -ENOENT;
 		goto put_reg;
 	}

 	/*
 	 * We expect an OPP table supplied by platform.
 	 * Just, incase the platform did not supply the OPP
 	 * table, it will try to get it.
 	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
 		ret = dev_pm_opp_of_add_table(cpu_dev);
 		if (ret < 0) {
 			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
 			goto put_reg;
 		}

 		/* Because we have added the OPPs here, we must free them */
 		free_opp = true;

 		num = dev_pm_opp_get_opp_count(cpu_dev);
 		if (num < 0) {
 			ret = num;
 			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
 			goto out_free_opp;
 		}
 	}

 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
 		goto put_reg;
 	}

 	/* Make imx6_soc_volt array's size same as arm opp number */
 	imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL);
 	if (imx6_soc_volt == NULL) {
 		ret = -ENOMEM;
 		goto free_freq_table;
 	}

 	prop = of_find_property(np, "fsl,soc-operating-points", NULL);
 	if (!prop || !prop->value)
 		goto soc_opp_out;

 	/*
 	 * Each OPP is a set of tuples consisting of frequency and
 	 * voltage like <freq-kHz vol-uV>.
 	 */
 	nr = prop->length / sizeof(u32);
 	if (nr % 2 || (nr / 2) < num)
 		goto soc_opp_out;

 	for (j = 0; j < num; j++) {
 		val = prop->value;
 		for (i = 0; i < nr / 2; i++) {
 			unsigned long freq = be32_to_cpup(val++);
 			unsigned long volt = be32_to_cpup(val++);
 			if (freq_table[j].frequency == freq) {
 				imx6_soc_volt[soc_opp_count++] = volt;
 				break;
 			}
 		}
 	}

 soc_opp_out:
 	/* use fixed soc opp volt if no valid soc opp info found in dtb */
 	if (soc_opp_count != num) {
 		dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
 		for (j = 0; j < num; j++)
 			imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
 		if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
 			imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
 	}

 	if (of_property_read_u32(np, "clock-latency", &transition_latency))
 		transition_latency = CPUFREQ_ETERNAL;

 	/*
 	 * Calculate the ramp time for max voltage change in the
 	 * VDDSOC and VDDPU regulators.
 	 */
 	ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
 	if (ret > 0)
 		transition_latency += ret * 1000;
 	if (!IS_ERR(pu_reg)) {
 		ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
 		if (ret > 0)
 			transition_latency += ret * 1000;
 	}

 	/*
 	 * OPP is maintained in order of increasing frequency, and
 	 * freq_table initialised from OPP is therefore sorted in the
 	 * same order.
 	 */
 	rcu_read_lock();
 	opp = dev_pm_opp_find_freq_exact(cpu_dev,
 				  freq_table[0].frequency * 1000, true);
 	min_volt = dev_pm_opp_get_voltage(opp);
 	opp = dev_pm_opp_find_freq_exact(cpu_dev,
 				  freq_table[--num].frequency * 1000, true);
 	max_volt = dev_pm_opp_get_voltage(opp);
 	rcu_read_unlock();
 	ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
 	if (ret > 0)
 		transition_latency += ret * 1000;

 	ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
 	if (ret) {
 		dev_err(cpu_dev, "failed register driver: %d\n", ret);
 		goto free_freq_table;
 	}

 	of_node_put(np);
 	return 0;

 free_freq_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_free_opp:
 	if (free_opp)
 		dev_pm_opp_of_remove_table(cpu_dev);
 put_reg:
 	if (!IS_ERR(arm_reg))
 		regulator_put(arm_reg);
 	if (!IS_ERR(pu_reg))
 		regulator_put(pu_reg);
 	if (!IS_ERR(soc_reg))
 		regulator_put(soc_reg);
 put_clk:
 	if (!IS_ERR(arm_clk))
 		clk_put(arm_clk);
 	if (!IS_ERR(pll1_sys_clk))
 		clk_put(pll1_sys_clk);
 	if (!IS_ERR(pll1_sw_clk))
 		clk_put(pll1_sw_clk);
 	if (!IS_ERR(step_clk))
 		clk_put(step_clk);
 	if (!IS_ERR(pll2_pfd2_396m_clk))
 		clk_put(pll2_pfd2_396m_clk);
 	if (!IS_ERR(pll2_bus_clk))
 		clk_put(pll2_bus_clk);
 	if (!IS_ERR(secondary_sel_clk))
 		clk_put(secondary_sel_clk);
 	of_node_put(np);
 	return ret;
 }

 static int imx6q_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 	if (free_opp)
 		dev_pm_opp_of_remove_table(cpu_dev);
 	regulator_put(arm_reg);
 	if (!IS_ERR(pu_reg))
 		regulator_put(pu_reg);
 	regulator_put(soc_reg);
 	clk_put(arm_clk);
 	clk_put(pll1_sys_clk);
 	clk_put(pll1_sw_clk);
 	clk_put(step_clk);
 	clk_put(pll2_pfd2_396m_clk);
 	clk_put(pll2_bus_clk);
 	clk_put(secondary_sel_clk);

 	return 0;
 }

 static struct platform_driver imx6q_cpufreq_platdrv = {
 	.driver = {
 		.name	= "imx6q-cpufreq",
 	},
 	.probe		= imx6q_cpufreq_probe,
 	.remove		= imx6q_cpufreq_remove,
 };
 module_platform_driver(imx6q_cpufreq_platdrv);

 MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
 MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
 MODULE_LICENSE("GPL");
	/*
	* Copyright (C) 2013 Freescale Semiconductor, Inc.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/clk.h>
	#include <linux/cpu.h>
	#include <linux/cpufreq.h>
	#include <linux/err.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/pm_opp.h>
	#include <linux/platform_device.h>
	#include <linux/regulator/consumer.h>

	#define PU_SOC_VOLTAGE_NORMAL 1250000
	#define PU_SOC_VOLTAGE_HIGH 1275000
	#define FREQ_1P2_GHZ 1200000000

	static struct regulator *arm_reg;
	static struct regulator *pu_reg;
	static struct regulator *soc_reg;

	static struct clk *arm_clk;
	static struct clk *pll1_sys_clk;
	static struct clk *pll1_sw_clk;
	static struct clk *step_clk;
	static struct clk *pll2_pfd2_396m_clk;

	/* clk used by i.MX6UL */
	static struct clk *pll2_bus_clk;
	static struct clk *secondary_sel_clk;

	static struct device *cpu_dev;
	static bool free_opp;
	static struct cpufreq_frequency_table *freq_table;
	static unsigned int transition_latency;

	static u32 *imx6_soc_volt;
	static u32 soc_opp_count;

	static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
	{
	struct dev_pm_opp *opp;
	unsigned long freq_hz, volt, volt_old;
	unsigned int old_freq, new_freq;
	int ret;

	new_freq = freq_table[index].frequency;
	freq_hz = new_freq * 1000;
	old_freq = clk_get_rate(arm_clk) / 1000;

	rcu_read_lock();
	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
	if (IS_ERR(opp)) {
	rcu_read_unlock();
	dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
	return PTR_ERR(opp);
	}

	volt = dev_pm_opp_get_voltage(opp);
	rcu_read_unlock();
	volt_old = regulator_get_voltage(arm_reg);

	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
	old_freq / 1000, volt_old / 1000,
	new_freq / 1000, volt / 1000);

	/* scaling up? scale voltage before frequency */
	if (new_freq > old_freq) {
	if (!IS_ERR(pu_reg)) {
	ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
	if (ret) {
	dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
	return ret;
	}
	}
	ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
	if (ret) {
	dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
	return ret;
	}
	ret = regulator_set_voltage_tol(arm_reg, volt, 0);
	if (ret) {
	dev_err(cpu_dev,
	"failed to scale vddarm up: %d\n", ret);
	return ret;
	}
	}

	/*
	* The setpoints are selected per PLL/PDF frequencies, so we need to
	* reprogram PLL for frequency scaling. The procedure of reprogramming
	* PLL1 is as below.
	* For i.MX6UL, it has a secondary clk mux, the cpu frequency change
	* flow is slightly different from other i.MX6 OSC.
	* The cpu frequeny change flow for i.MX6(except i.MX6UL) is as below:
	* - Enable pll2_pfd2_396m_clk and reparent pll1_sw_clk to it
	* - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
	* - Disable pll2_pfd2_396m_clk
	*/
	if (of_machine_is_compatible("fsl,imx6ul")) {
	/*
	* When changing pll1_sw_clk's parent to pll1_sys_clk,
	* CPU may run at higher than 528MHz, this will lead to
	* the system unstable if the voltage is lower than the
	* voltage of 528MHz, so lower the CPU frequency to one
	* half before changing CPU frequency.
	*/
	clk_set_rate(arm_clk, (old_freq >> 1) * 1000);
	clk_set_parent(pll1_sw_clk, pll1_sys_clk);
	if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk))
	clk_set_parent(secondary_sel_clk, pll2_bus_clk);
	else
	clk_set_parent(secondary_sel_clk, pll2_pfd2_396m_clk);
	clk_set_parent(step_clk, secondary_sel_clk);
	clk_set_parent(pll1_sw_clk, step_clk);
	} else {
	clk_set_parent(step_clk, pll2_pfd2_396m_clk);
	clk_set_parent(pll1_sw_clk, step_clk);
	if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
	clk_set_rate(pll1_sys_clk, new_freq * 1000);
	clk_set_parent(pll1_sw_clk, pll1_sys_clk);
	}
	}

	/* Ensure the arm clock divider is what we expect */
	ret = clk_set_rate(arm_clk, new_freq * 1000);
	if (ret) {
	dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
	regulator_set_voltage_tol(arm_reg, volt_old, 0);
	return ret;
	}

	/* scaling down? scale voltage after frequency */
	if (new_freq < old_freq) {
	ret = regulator_set_voltage_tol(arm_reg, volt, 0);
	if (ret) {
	dev_warn(cpu_dev,
	"failed to scale vddarm down: %d\n", ret);
	ret = 0;
	}
	ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
	if (ret) {
	dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
	ret = 0;
	}
	if (!IS_ERR(pu_reg)) {
	ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
	if (ret) {
	dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
	ret = 0;
	}
	}
	}

	return 0;
	}

	static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
	{
	policy->clk = arm_clk;
	return cpufreq_generic_init(policy, freq_table, transition_latency);
	}

	static struct cpufreq_driver imx6q_cpufreq_driver = {
	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
	.verify = cpufreq_generic_frequency_table_verify,
	.target_index = imx6q_set_target,
	.get = cpufreq_generic_get,
	.init = imx6q_cpufreq_init,
	.name = "imx6q-cpufreq",
	.attr = cpufreq_generic_attr,
	};

	static int imx6q_cpufreq_probe(struct platform_device *pdev)
	{
	struct device_node *np;
	struct dev_pm_opp *opp;
	unsigned long min_volt, max_volt;
	int num, ret;
	const struct property *prop;
	const __be32 *val;
	u32 nr, i, j;

	cpu_dev = get_cpu_device(0);
	if (!cpu_dev) {
	pr_err("failed to get cpu0 device\n");
	return -ENODEV;
	}

	np = of_node_get(cpu_dev->of_node);
	if (!np) {
	dev_err(cpu_dev, "failed to find cpu0 node\n");
	return -ENOENT;
	}

	arm_clk = clk_get(cpu_dev, "arm");
	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
	step_clk = clk_get(cpu_dev, "step");
	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
	if (IS_ERR(arm_clk) \|\| IS_ERR(pll1_sys_clk) \|\| IS_ERR(pll1_sw_clk) \|\|
	IS_ERR(step_clk) \|\| IS_ERR(pll2_pfd2_396m_clk)) {
	dev_err(cpu_dev, "failed to get clocks\n");
	ret = -ENOENT;
	goto put_clk;
	}

	if (of_machine_is_compatible("fsl,imx6ul")) {
	pll2_bus_clk = clk_get(cpu_dev, "pll2_bus");
	secondary_sel_clk = clk_get(cpu_dev, "secondary_sel");
	if (IS_ERR(pll2_bus_clk) \|\| IS_ERR(secondary_sel_clk)) {
	dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n");
	ret = -ENOENT;
	goto put_clk;
	}
	}

	arm_reg = regulator_get(cpu_dev, "arm");
	pu_reg = regulator_get_optional(cpu_dev, "pu");
	soc_reg = regulator_get(cpu_dev, "soc");
	if (IS_ERR(arm_reg) \|\| IS_ERR(soc_reg)) {
	dev_err(cpu_dev, "failed to get regulators\n");
	ret = -ENOENT;
	goto put_reg;
	}

	/*
	* We expect an OPP table supplied by platform.
	* Just, incase the platform did not supply the OPP
	* table, it will try to get it.
	*/
	num = dev_pm_opp_get_opp_count(cpu_dev);
	if (num < 0) {
	ret = dev_pm_opp_of_add_table(cpu_dev);
	if (ret < 0) {
	dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
	goto put_reg;
	}

	/* Because we have added the OPPs here, we must free them */
	free_opp = true;

	num = dev_pm_opp_get_opp_count(cpu_dev);
	if (num < 0) {
	ret = num;
	dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
	goto out_free_opp;
	}
	}

	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
	if (ret) {
	dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
	goto put_reg;
	}

	/* Make imx6_soc_volt array's size same as arm opp number */
	imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(imx6_soc_volt) num, GFP_KERNEL);
	if (imx6_soc_volt == NULL) {
	ret = -ENOMEM;
	goto free_freq_table;
	}

	prop = of_find_property(np, "fsl,soc-operating-points", NULL);
	if (!prop \|\| !prop->value)
	goto soc_opp_out;

	/*
	* Each OPP is a set of tuples consisting of frequency and
	* voltage like <freq-kHz vol-uV>.
	*/
	nr = prop->length / sizeof(u32);
	if (nr % 2 \|\| (nr / 2) < num)
	goto soc_opp_out;

	for (j = 0; j < num; j++) {
	val = prop->value;
	for (i = 0; i < nr / 2; i++) {
	unsigned long freq = be32_to_cpup(val++);
	unsigned long volt = be32_to_cpup(val++);
	if (freq_table[j].frequency == freq) {
	imx6_soc_volt[soc_opp_count++] = volt;
	break;
	}
	}
	}

	soc_opp_out:
	/* use fixed soc opp volt if no valid soc opp info found in dtb */
	if (soc_opp_count != num) {
	dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
	for (j = 0; j < num; j++)
	imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
	if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
	imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
	}

	if (of_property_read_u32(np, "clock-latency", &transition_latency))
	transition_latency = CPUFREQ_ETERNAL;

	/*
	* Calculate the ramp time for max voltage change in the
	* VDDSOC and VDDPU regulators.
	*/
	ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
	if (ret > 0)
	transition_latency += ret * 1000;
	if (!IS_ERR(pu_reg)) {
	ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
	if (ret > 0)
	transition_latency += ret * 1000;
	}

	/*
	* OPP is maintained in order of increasing frequency, and
	* freq_table initialised from OPP is therefore sorted in the
	* same order.
	*/
	rcu_read_lock();
	opp = dev_pm_opp_find_freq_exact(cpu_dev,
	freq_table[0].frequency * 1000, true);
	min_volt = dev_pm_opp_get_voltage(opp);
	opp = dev_pm_opp_find_freq_exact(cpu_dev,
	freq_table[--num].frequency * 1000, true);
	max_volt = dev_pm_opp_get_voltage(opp);
	rcu_read_unlock();
	ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
	if (ret > 0)
	transition_latency += ret * 1000;

	ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
	if (ret) {
	dev_err(cpu_dev, "failed register driver: %d\n", ret);
	goto free_freq_table;
	}

	of_node_put(np);
	return 0;

	free_freq_table:
	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
	out_free_opp:
	if (free_opp)
	dev_pm_opp_of_remove_table(cpu_dev);
	put_reg:
	if (!IS_ERR(arm_reg))
	regulator_put(arm_reg);
	if (!IS_ERR(pu_reg))
	regulator_put(pu_reg);
	if (!IS_ERR(soc_reg))
	regulator_put(soc_reg);
	put_clk:
	if (!IS_ERR(arm_clk))
	clk_put(arm_clk);
	if (!IS_ERR(pll1_sys_clk))
	clk_put(pll1_sys_clk);
	if (!IS_ERR(pll1_sw_clk))
	clk_put(pll1_sw_clk);
	if (!IS_ERR(step_clk))
	clk_put(step_clk);
	if (!IS_ERR(pll2_pfd2_396m_clk))
	clk_put(pll2_pfd2_396m_clk);
	if (!IS_ERR(pll2_bus_clk))
	clk_put(pll2_bus_clk);
	if (!IS_ERR(secondary_sel_clk))
	clk_put(secondary_sel_clk);
	of_node_put(np);
	return ret;
	}

	static int imx6q_cpufreq_remove(struct platform_device *pdev)
	{
	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
	if (free_opp)
	dev_pm_opp_of_remove_table(cpu_dev);
	regulator_put(arm_reg);
	if (!IS_ERR(pu_reg))
	regulator_put(pu_reg);
	regulator_put(soc_reg);
	clk_put(arm_clk);
	clk_put(pll1_sys_clk);
	clk_put(pll1_sw_clk);
	clk_put(step_clk);
	clk_put(pll2_pfd2_396m_clk);
	clk_put(pll2_bus_clk);
	clk_put(secondary_sel_clk);

	return 0;
	}

	static struct platform_driver imx6q_cpufreq_platdrv = {
	.driver = {
	.name = "imx6q-cpufreq",
	},
	.probe = imx6q_cpufreq_probe,
	.remove = imx6q_cpufreq_remove,
	};
	module_platform_driver(imx6q_cpufreq_platdrv);

	MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
	MODULE_DESCRIPTION("Freescale i.MX6Q cpufreq driver");
	MODULE_LICENSE("GPL");