proc tty: switch synclink to ->proc_fops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 0057a8f..afd0b26 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -79,6 +79,7 @@
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/mm.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
@@ -3459,18 +3460,17 @@
* /proc fs routines....
*/
-static inline int line_info(char *buf, struct mgsl_struct *info)
+static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
{
char stat_buf[30];
- int ret;
unsigned long flags;
if (info->bus_type == MGSL_BUS_TYPE_PCI) {
- ret = sprintf(buf, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
+ seq_printf(m, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X",
info->device_name, info->io_base, info->irq_level,
info->phys_memory_base, info->phys_lcr_base);
} else {
- ret = sprintf(buf, "%s:(E)ISA io:%04X irq:%d dma:%d",
+ seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
info->device_name, info->io_base,
info->irq_level, info->dma_level);
}
@@ -3497,37 +3497,37 @@
if (info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
- ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d",
+ seq_printf(m, " HDLC txok:%d rxok:%d",
info->icount.txok, info->icount.rxok);
if (info->icount.txunder)
- ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder);
+ seq_printf(m, " txunder:%d", info->icount.txunder);
if (info->icount.txabort)
- ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort);
+ seq_printf(m, " txabort:%d", info->icount.txabort);
if (info->icount.rxshort)
- ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort);
+ seq_printf(m, " rxshort:%d", info->icount.rxshort);
if (info->icount.rxlong)
- ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong);
+ seq_printf(m, " rxlong:%d", info->icount.rxlong);
if (info->icount.rxover)
- ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover);
+ seq_printf(m, " rxover:%d", info->icount.rxover);
if (info->icount.rxcrc)
- ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc);
+ seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
} else {
- ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d",
+ seq_printf(m, " ASYNC tx:%d rx:%d",
info->icount.tx, info->icount.rx);
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%d", info->icount.frame);
+ seq_printf(m, " fe:%d", info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%d", info->icount.parity);
+ seq_printf(m, " pe:%d", info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%d", info->icount.brk);
+ seq_printf(m, " brk:%d", info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%d", info->icount.overrun);
+ seq_printf(m, " oe:%d", info->icount.overrun);
}
/* Append serial signal status to end */
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+ seq_printf(m, " %s\n", stat_buf+1);
- ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
+ seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
info->tx_active,info->bh_requested,info->bh_running,
info->pending_bh);
@@ -3544,60 +3544,40 @@
u16 Tmr = usc_InReg( info, TMR );
u16 Tccr = usc_InReg( info, TCCR );
u16 Ccar = inw( info->io_base + CCAR );
- ret += sprintf(buf+ret, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
+ seq_printf(m, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n"
"ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n",
Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar );
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
- return ret;
-
-} /* end of line_info() */
+}
-/* mgsl_read_proc()
- *
- * Called to print information about devices
- *
- * Arguments:
- * page page of memory to hold returned info
- * start
- * off
- * count
- * eof
- * data
- *
- * Return Value:
- */
-static int mgsl_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+/* Called to print information about devices */
+static int mgsl_proc_show(struct seq_file *m, void *v)
{
- int len = 0, l;
- off_t begin = 0;
struct mgsl_struct *info;
- len += sprintf(page, "synclink driver:%s\n", driver_version);
+ seq_printf(m, "synclink driver:%s\n", driver_version);
info = mgsl_device_list;
while( info ) {
- l = line_info(page + len, info);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ line_info(m, info);
info = info->next_device;
}
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
-
-} /* end of mgsl_read_proc() */
+static int mgsl_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mgsl_proc_show, NULL);
+}
+
+static const struct file_operations mgsl_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = mgsl_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
/* mgsl_allocate_dma_buffers()
*
@@ -4335,13 +4315,13 @@
.send_xchar = mgsl_send_xchar,
.break_ctl = mgsl_break,
.wait_until_sent = mgsl_wait_until_sent,
- .read_proc = mgsl_read_proc,
.set_termios = mgsl_set_termios,
.stop = mgsl_stop,
.start = mgsl_start,
.hangup = mgsl_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
+ .proc_fops = &mgsl_proc_fops,
};
/*