| /* |
| * Epson HWA742 LCD controller driver |
| * |
| * Copyright (C) 2004-2005 Nokia Corporation |
| * Authors: Juha Yrjölä <juha.yrjola@nokia.com> |
| * Imre Deak <imre.deak@nokia.com> |
| * YUV support: Jussi Laako <jussi.laako@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/fb.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| |
| #include "omapfb.h" |
| |
| #define HWA742_REV_CODE_REG 0x0 |
| #define HWA742_CONFIG_REG 0x2 |
| #define HWA742_PLL_DIV_REG 0x4 |
| #define HWA742_PLL_0_REG 0x6 |
| #define HWA742_PLL_1_REG 0x8 |
| #define HWA742_PLL_2_REG 0xa |
| #define HWA742_PLL_3_REG 0xc |
| #define HWA742_PLL_4_REG 0xe |
| #define HWA742_CLK_SRC_REG 0x12 |
| #define HWA742_PANEL_TYPE_REG 0x14 |
| #define HWA742_H_DISP_REG 0x16 |
| #define HWA742_H_NDP_REG 0x18 |
| #define HWA742_V_DISP_1_REG 0x1a |
| #define HWA742_V_DISP_2_REG 0x1c |
| #define HWA742_V_NDP_REG 0x1e |
| #define HWA742_HS_W_REG 0x20 |
| #define HWA742_HP_S_REG 0x22 |
| #define HWA742_VS_W_REG 0x24 |
| #define HWA742_VP_S_REG 0x26 |
| #define HWA742_PCLK_POL_REG 0x28 |
| #define HWA742_INPUT_MODE_REG 0x2a |
| #define HWA742_TRANSL_MODE_REG1 0x2e |
| #define HWA742_DISP_MODE_REG 0x34 |
| #define HWA742_WINDOW_TYPE 0x36 |
| #define HWA742_WINDOW_X_START_0 0x38 |
| #define HWA742_WINDOW_X_START_1 0x3a |
| #define HWA742_WINDOW_Y_START_0 0x3c |
| #define HWA742_WINDOW_Y_START_1 0x3e |
| #define HWA742_WINDOW_X_END_0 0x40 |
| #define HWA742_WINDOW_X_END_1 0x42 |
| #define HWA742_WINDOW_Y_END_0 0x44 |
| #define HWA742_WINDOW_Y_END_1 0x46 |
| #define HWA742_MEMORY_WRITE_LSB 0x48 |
| #define HWA742_MEMORY_WRITE_MSB 0x49 |
| #define HWA742_MEMORY_READ_0 0x4a |
| #define HWA742_MEMORY_READ_1 0x4c |
| #define HWA742_MEMORY_READ_2 0x4e |
| #define HWA742_POWER_SAVE 0x56 |
| #define HWA742_NDP_CTRL 0x58 |
| |
| #define HWA742_AUTO_UPDATE_TIME (HZ / 20) |
| |
| /* Reserve 4 request slots for requests in irq context */ |
| #define REQ_POOL_SIZE 24 |
| #define IRQ_REQ_POOL_SIZE 4 |
| |
| #define REQ_FROM_IRQ_POOL 0x01 |
| |
| #define REQ_COMPLETE 0 |
| #define REQ_PENDING 1 |
| |
| struct update_param { |
| int x, y, width, height; |
| int color_mode; |
| int flags; |
| }; |
| |
| struct hwa742_request { |
| struct list_head entry; |
| unsigned int flags; |
| |
| int (*handler)(struct hwa742_request *req); |
| void (*complete)(void *data); |
| void *complete_data; |
| |
| union { |
| struct update_param update; |
| struct completion *sync; |
| } par; |
| }; |
| |
| struct { |
| enum omapfb_update_mode update_mode; |
| enum omapfb_update_mode update_mode_before_suspend; |
| |
| struct timer_list auto_update_timer; |
| int stop_auto_update; |
| struct omapfb_update_window auto_update_window; |
| unsigned te_connected:1; |
| unsigned vsync_only:1; |
| |
| struct hwa742_request req_pool[REQ_POOL_SIZE]; |
| struct list_head pending_req_list; |
| struct list_head free_req_list; |
| struct semaphore req_sema; |
| spinlock_t req_lock; |
| |
| struct extif_timings reg_timings, lut_timings; |
| |
| int prev_color_mode; |
| int prev_flags; |
| int window_type; |
| |
| u32 max_transmit_size; |
| u32 extif_clk_period; |
| unsigned long pix_tx_time; |
| unsigned long line_upd_time; |
| |
| |
| struct omapfb_device *fbdev; |
| struct lcd_ctrl_extif *extif; |
| const struct lcd_ctrl *int_ctrl; |
| |
| struct clk *sys_ck; |
| } hwa742; |
| |
| struct lcd_ctrl hwa742_ctrl; |
| |
| static u8 hwa742_read_reg(u8 reg) |
| { |
| u8 data; |
| |
| hwa742.extif->set_bits_per_cycle(8); |
| hwa742.extif->write_command(®, 1); |
| hwa742.extif->read_data(&data, 1); |
| |
| return data; |
| } |
| |
| static void hwa742_write_reg(u8 reg, u8 data) |
| { |
| hwa742.extif->set_bits_per_cycle(8); |
| hwa742.extif->write_command(®, 1); |
| hwa742.extif->write_data(&data, 1); |
| } |
| |
| static void set_window_regs(int x_start, int y_start, int x_end, int y_end) |
| { |
| u8 tmp[8]; |
| u8 cmd; |
| |
| x_end--; |
| y_end--; |
| tmp[0] = x_start; |
| tmp[1] = x_start >> 8; |
| tmp[2] = y_start; |
| tmp[3] = y_start >> 8; |
| tmp[4] = x_end; |
| tmp[5] = x_end >> 8; |
| tmp[6] = y_end; |
| tmp[7] = y_end >> 8; |
| |
| hwa742.extif->set_bits_per_cycle(8); |
| cmd = HWA742_WINDOW_X_START_0; |
| |
| hwa742.extif->write_command(&cmd, 1); |
| |
| hwa742.extif->write_data(tmp, 8); |
| } |
| |
| static void set_format_regs(int conv, int transl, int flags) |
| { |
| if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) { |
| hwa742.window_type = ((hwa742.window_type & 0xfc) | 0x01); |
| #ifdef VERBOSE |
| dev_dbg(hwa742.fbdev->dev, "hwa742: enabled pixel doubling\n"); |
| #endif |
| } else { |
| hwa742.window_type = (hwa742.window_type & 0xfc); |
| #ifdef VERBOSE |
| dev_dbg(hwa742.fbdev->dev, "hwa742: disabled pixel doubling\n"); |
| #endif |
| } |
| |
| hwa742_write_reg(HWA742_INPUT_MODE_REG, conv); |
| hwa742_write_reg(HWA742_TRANSL_MODE_REG1, transl); |
| hwa742_write_reg(HWA742_WINDOW_TYPE, hwa742.window_type); |
| } |
| |
| static void enable_tearsync(int y, int width, int height, int screen_height, |
| int force_vsync) |
| { |
| u8 b; |
| |
| b = hwa742_read_reg(HWA742_NDP_CTRL); |
| b |= 1 << 2; |
| hwa742_write_reg(HWA742_NDP_CTRL, b); |
| |
| if (likely(hwa742.vsync_only || force_vsync)) { |
| hwa742.extif->enable_tearsync(1, 0); |
| return; |
| } |
| |
| if (width * hwa742.pix_tx_time < hwa742.line_upd_time) { |
| hwa742.extif->enable_tearsync(1, 0); |
| return; |
| } |
| |
| if ((width * hwa742.pix_tx_time / 1000) * height < |
| (y + height) * (hwa742.line_upd_time / 1000)) { |
| hwa742.extif->enable_tearsync(1, 0); |
| return; |
| } |
| |
| hwa742.extif->enable_tearsync(1, y + 1); |
| } |
| |
| static void disable_tearsync(void) |
| { |
| u8 b; |
| |
| hwa742.extif->enable_tearsync(0, 0); |
| |
| b = hwa742_read_reg(HWA742_NDP_CTRL); |
| b &= ~(1 << 2); |
| hwa742_write_reg(HWA742_NDP_CTRL, b); |
| } |
| |
| static inline struct hwa742_request *alloc_req(void) |
| { |
| unsigned long flags; |
| struct hwa742_request *req; |
| int req_flags = 0; |
| |
| if (!in_interrupt()) |
| down(&hwa742.req_sema); |
| else |
| req_flags = REQ_FROM_IRQ_POOL; |
| |
| spin_lock_irqsave(&hwa742.req_lock, flags); |
| BUG_ON(list_empty(&hwa742.free_req_list)); |
| req = list_entry(hwa742.free_req_list.next, |
| struct hwa742_request, entry); |
| list_del(&req->entry); |
| spin_unlock_irqrestore(&hwa742.req_lock, flags); |
| |
| INIT_LIST_HEAD(&req->entry); |
| req->flags = req_flags; |
| |
| return req; |
| } |
| |
| static inline void free_req(struct hwa742_request *req) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hwa742.req_lock, flags); |
| |
| list_move(&req->entry, &hwa742.free_req_list); |
| if (!(req->flags & REQ_FROM_IRQ_POOL)) |
| up(&hwa742.req_sema); |
| |
| spin_unlock_irqrestore(&hwa742.req_lock, flags); |
| } |
| |
| static void process_pending_requests(void) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&hwa742.req_lock, flags); |
| |
| while (!list_empty(&hwa742.pending_req_list)) { |
| struct hwa742_request *req; |
| void (*complete)(void *); |
| void *complete_data; |
| |
| req = list_entry(hwa742.pending_req_list.next, |
| struct hwa742_request, entry); |
| spin_unlock_irqrestore(&hwa742.req_lock, flags); |
| |
| if (req->handler(req) == REQ_PENDING) |
| return; |
| |
| complete = req->complete; |
| complete_data = req->complete_data; |
| free_req(req); |
| |
| if (complete) |
| complete(complete_data); |
| |
| spin_lock_irqsave(&hwa742.req_lock, flags); |
| } |
| |
| spin_unlock_irqrestore(&hwa742.req_lock, flags); |
| } |
| |
| static void submit_req_list(struct list_head *head) |
| { |
| unsigned long flags; |
| int process = 1; |
| |
| spin_lock_irqsave(&hwa742.req_lock, flags); |
| if (likely(!list_empty(&hwa742.pending_req_list))) |
| process = 0; |
| list_splice_init(head, hwa742.pending_req_list.prev); |
| spin_unlock_irqrestore(&hwa742.req_lock, flags); |
| |
| if (process) |
| process_pending_requests(); |
| } |
| |
| static void request_complete(void *data) |
| { |
| struct hwa742_request *req = (struct hwa742_request *)data; |
| void (*complete)(void *); |
| void *complete_data; |
| |
| complete = req->complete; |
| complete_data = req->complete_data; |
| |
| free_req(req); |
| |
| if (complete) |
| complete(complete_data); |
| |
| process_pending_requests(); |
| } |
| |
| static int send_frame_handler(struct hwa742_request *req) |
| { |
| struct update_param *par = &req->par.update; |
| int x = par->x; |
| int y = par->y; |
| int w = par->width; |
| int h = par->height; |
| int bpp; |
| int conv, transl; |
| unsigned long offset; |
| int color_mode = par->color_mode; |
| int flags = par->flags; |
| int scr_width = hwa742.fbdev->panel->x_res; |
| int scr_height = hwa742.fbdev->panel->y_res; |
| |
| #ifdef VERBOSE |
| dev_dbg(hwa742.fbdev->dev, "x %d y %d w %d h %d scr_width %d " |
| "color_mode %d flags %d\n", |
| x, y, w, h, scr_width, color_mode, flags); |
| #endif |
| |
| switch (color_mode) { |
| case OMAPFB_COLOR_YUV422: |
| bpp = 16; |
| conv = 0x08; |
| transl = 0x25; |
| break; |
| case OMAPFB_COLOR_YUV420: |
| bpp = 12; |
| conv = 0x09; |
| transl = 0x25; |
| break; |
| case OMAPFB_COLOR_RGB565: |
| bpp = 16; |
| conv = 0x01; |
| transl = 0x05; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (hwa742.prev_flags != flags || |
| hwa742.prev_color_mode != color_mode) { |
| set_format_regs(conv, transl, flags); |
| hwa742.prev_color_mode = color_mode; |
| hwa742.prev_flags = flags; |
| } |
| flags = req->par.update.flags; |
| if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC) |
| enable_tearsync(y, scr_width, h, scr_height, |
| flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC); |
| else |
| disable_tearsync(); |
| |
| set_window_regs(x, y, x + w, y + h); |
| |
| offset = (scr_width * y + x) * bpp / 8; |
| |
| hwa742.int_ctrl->setup_plane(OMAPFB_PLANE_GFX, |
| OMAPFB_CHANNEL_OUT_LCD, offset, scr_width, 0, 0, w, h, |
| color_mode); |
| |
| hwa742.extif->set_bits_per_cycle(16); |
| |
| hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 1); |
| hwa742.extif->transfer_area(w, h, request_complete, req); |
| |
| return REQ_PENDING; |
| } |
| |
| static void send_frame_complete(void *data) |
| { |
| hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 0); |
| } |
| |
| #define ADD_PREQ(_x, _y, _w, _h) do { \ |
| req = alloc_req(); \ |
| req->handler = send_frame_handler; \ |
| req->complete = send_frame_complete; \ |
| req->par.update.x = _x; \ |
| req->par.update.y = _y; \ |
| req->par.update.width = _w; \ |
| req->par.update.height = _h; \ |
| req->par.update.color_mode = color_mode;\ |
| req->par.update.flags = flags; \ |
| list_add_tail(&req->entry, req_head); \ |
| } while(0) |
| |
| static void create_req_list(struct omapfb_update_window *win, |
| struct list_head *req_head) |
| { |
| struct hwa742_request *req; |
| int x = win->x; |
| int y = win->y; |
| int width = win->width; |
| int height = win->height; |
| int color_mode; |
| int flags; |
| |
| flags = win->format & ~OMAPFB_FORMAT_MASK; |
| color_mode = win->format & OMAPFB_FORMAT_MASK; |
| |
| if (x & 1) { |
| ADD_PREQ(x, y, 1, height); |
| width--; |
| x++; |
| flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; |
| } |
| if (width & ~1) { |
| unsigned int xspan = width & ~1; |
| unsigned int ystart = y; |
| unsigned int yspan = height; |
| |
| if (xspan * height * 2 > hwa742.max_transmit_size) { |
| yspan = hwa742.max_transmit_size / (xspan * 2); |
| ADD_PREQ(x, ystart, xspan, yspan); |
| ystart += yspan; |
| yspan = height - yspan; |
| flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; |
| } |
| |
| ADD_PREQ(x, ystart, xspan, yspan); |
| x += xspan; |
| width -= xspan; |
| flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC; |
| } |
| if (width) |
| ADD_PREQ(x, y, 1, height); |
| } |
| |
| static void auto_update_complete(void *data) |
| { |
| if (!hwa742.stop_auto_update) |
| mod_timer(&hwa742.auto_update_timer, |
| jiffies + HWA742_AUTO_UPDATE_TIME); |
| } |
| |
| static void hwa742_update_window_auto(unsigned long arg) |
| { |
| LIST_HEAD(req_list); |
| struct hwa742_request *last; |
| |
| create_req_list(&hwa742.auto_update_window, &req_list); |
| last = list_entry(req_list.prev, struct hwa742_request, entry); |
| |
| last->complete = auto_update_complete; |
| last->complete_data = NULL; |
| |
| submit_req_list(&req_list); |
| } |
| |
| int hwa742_update_window_async(struct fb_info *fbi, |
| struct omapfb_update_window *win, |
| void (*complete_callback)(void *arg), |
| void *complete_callback_data) |
| { |
| LIST_HEAD(req_list); |
| struct hwa742_request *last; |
| int r = 0; |
| |
| if (hwa742.update_mode != OMAPFB_MANUAL_UPDATE) { |
| dev_dbg(hwa742.fbdev->dev, "invalid update mode\n"); |
| r = -EINVAL; |
| goto out; |
| } |
| if (unlikely(win->format & |
| ~(0x03 | OMAPFB_FORMAT_FLAG_DOUBLE | |
| OMAPFB_FORMAT_FLAG_TEARSYNC | OMAPFB_FORMAT_FLAG_FORCE_VSYNC))) { |
| dev_dbg(hwa742.fbdev->dev, "invalid window flag\n"); |
| r = -EINVAL; |
| goto out; |
| } |
| |
| create_req_list(win, &req_list); |
| last = list_entry(req_list.prev, struct hwa742_request, entry); |
| |
| last->complete = complete_callback; |
| last->complete_data = (void *)complete_callback_data; |
| |
| submit_req_list(&req_list); |
| |
| out: |
| return r; |
| } |
| EXPORT_SYMBOL(hwa742_update_window_async); |
| |
| static int hwa742_setup_plane(int plane, int channel_out, |
| unsigned long offset, int screen_width, |
| int pos_x, int pos_y, int width, int height, |
| int color_mode) |
| { |
| if (plane != OMAPFB_PLANE_GFX || |
| channel_out != OMAPFB_CHANNEL_OUT_LCD) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int hwa742_enable_plane(int plane, int enable) |
| { |
| if (plane != 0) |
| return -EINVAL; |
| |
| hwa742.int_ctrl->enable_plane(plane, enable); |
| |
| return 0; |
| } |
| |
| static int sync_handler(struct hwa742_request *req) |
| { |
| complete(req->par.sync); |
| return REQ_COMPLETE; |
| } |
| |
| static void hwa742_sync(void) |
| { |
| LIST_HEAD(req_list); |
| struct hwa742_request *req; |
| struct completion comp; |
| |
| req = alloc_req(); |
| |
| req->handler = sync_handler; |
| req->complete = NULL; |
| init_completion(&comp); |
| req->par.sync = ∁ |
| |
| list_add(&req->entry, &req_list); |
| submit_req_list(&req_list); |
| |
| wait_for_completion(&comp); |
| } |
| |
| static void hwa742_bind_client(struct omapfb_notifier_block *nb) |
| { |
| dev_dbg(hwa742.fbdev->dev, "update_mode %d\n", hwa742.update_mode); |
| if (hwa742.update_mode == OMAPFB_MANUAL_UPDATE) { |
| omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY); |
| } |
| } |
| |
| static int hwa742_set_update_mode(enum omapfb_update_mode mode) |
| { |
| if (mode != OMAPFB_MANUAL_UPDATE && mode != OMAPFB_AUTO_UPDATE && |
| mode != OMAPFB_UPDATE_DISABLED) |
| return -EINVAL; |
| |
| if (mode == hwa742.update_mode) |
| return 0; |
| |
| dev_info(hwa742.fbdev->dev, "HWA742: setting update mode to %s\n", |
| mode == OMAPFB_UPDATE_DISABLED ? "disabled" : |
| (mode == OMAPFB_AUTO_UPDATE ? "auto" : "manual")); |
| |
| switch (hwa742.update_mode) { |
| case OMAPFB_MANUAL_UPDATE: |
| omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_DISABLED); |
| break; |
| case OMAPFB_AUTO_UPDATE: |
| hwa742.stop_auto_update = 1; |
| del_timer_sync(&hwa742.auto_update_timer); |
| break; |
| case OMAPFB_UPDATE_DISABLED: |
| break; |
| } |
| |
| hwa742.update_mode = mode; |
| hwa742_sync(); |
| hwa742.stop_auto_update = 0; |
| |
| switch (mode) { |
| case OMAPFB_MANUAL_UPDATE: |
| omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY); |
| break; |
| case OMAPFB_AUTO_UPDATE: |
| hwa742_update_window_auto(0); |
| break; |
| case OMAPFB_UPDATE_DISABLED: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static enum omapfb_update_mode hwa742_get_update_mode(void) |
| { |
| return hwa742.update_mode; |
| } |
| |
| static unsigned long round_to_extif_ticks(unsigned long ps, int div) |
| { |
| int bus_tick = hwa742.extif_clk_period * div; |
| return (ps + bus_tick - 1) / bus_tick * bus_tick; |
| } |
| |
| static int calc_reg_timing(unsigned long sysclk, int div) |
| { |
| struct extif_timings *t; |
| unsigned long systim; |
| |
| /* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns, |
| * AccessTime 2 ns + 12.2 ns (regs), |
| * WEOffTime = WEOnTime + 1 ns, |
| * REOffTime = REOnTime + 16 ns (regs), |
| * CSOffTime = REOffTime + 1 ns |
| * ReadCycle = 2ns + 2*SYSCLK (regs), |
| * WriteCycle = 2*SYSCLK + 2 ns, |
| * CSPulseWidth = 10 ns */ |
| systim = 1000000000 / (sysclk / 1000); |
| dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps" |
| "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div); |
| |
| t = &hwa742.reg_timings; |
| memset(t, 0, sizeof(*t)); |
| t->clk_div = div; |
| t->cs_on_time = 0; |
| t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); |
| t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); |
| t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div); |
| t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div); |
| t->re_off_time = round_to_extif_ticks(t->re_on_time + 16000, div); |
| t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div); |
| t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); |
| if (t->we_cycle_time < t->we_off_time) |
| t->we_cycle_time = t->we_off_time; |
| t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); |
| if (t->re_cycle_time < t->re_off_time) |
| t->re_cycle_time = t->re_off_time; |
| t->cs_pulse_width = 0; |
| |
| dev_dbg(hwa742.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n", |
| t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); |
| dev_dbg(hwa742.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n", |
| t->we_on_time, t->we_off_time, t->re_cycle_time, |
| t->we_cycle_time); |
| dev_dbg(hwa742.fbdev->dev, "[reg]rdaccess %d cspulse %d\n", |
| t->access_time, t->cs_pulse_width); |
| |
| return hwa742.extif->convert_timings(t); |
| } |
| |
| static int calc_lut_timing(unsigned long sysclk, int div) |
| { |
| struct extif_timings *t; |
| unsigned long systim; |
| |
| /* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns, |
| * AccessTime 2 ns + 4 * SYSCLK + 26 (lut), |
| * WEOffTime = WEOnTime + 1 ns, |
| * REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut), |
| * CSOffTime = REOffTime + 1 ns |
| * ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut), |
| * WriteCycle = 2*SYSCLK + 2 ns, |
| * CSPulseWidth = 10 ns |
| */ |
| systim = 1000000000 / (sysclk / 1000); |
| dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps" |
| "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div); |
| |
| t = &hwa742.lut_timings; |
| memset(t, 0, sizeof(*t)); |
| |
| t->clk_div = div; |
| |
| t->cs_on_time = 0; |
| t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); |
| t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div); |
| t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim + |
| 26000, div); |
| t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div); |
| t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim + |
| 26000, div); |
| t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div); |
| t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div); |
| if (t->we_cycle_time < t->we_off_time) |
| t->we_cycle_time = t->we_off_time; |
| t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div); |
| if (t->re_cycle_time < t->re_off_time) |
| t->re_cycle_time = t->re_off_time; |
| t->cs_pulse_width = 0; |
| |
| dev_dbg(hwa742.fbdev->dev, "[lut]cson %d csoff %d reon %d reoff %d\n", |
| t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); |
| dev_dbg(hwa742.fbdev->dev, "[lut]weon %d weoff %d recyc %d wecyc %d\n", |
| t->we_on_time, t->we_off_time, t->re_cycle_time, |
| t->we_cycle_time); |
| dev_dbg(hwa742.fbdev->dev, "[lut]rdaccess %d cspulse %d\n", |
| t->access_time, t->cs_pulse_width); |
| |
| return hwa742.extif->convert_timings(t); |
| } |
| |
| static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div) |
| { |
| int max_clk_div; |
| int div; |
| |
| hwa742.extif->get_clk_info(&hwa742.extif_clk_period, &max_clk_div); |
| for (div = 1; div < max_clk_div; div++) { |
| if (calc_reg_timing(sysclk, div) == 0) |
| break; |
| } |
| if (div >= max_clk_div) |
| goto err; |
| |
| *extif_mem_div = div; |
| |
| for (div = 1; div < max_clk_div; div++) { |
| if (calc_lut_timing(sysclk, div) == 0) |
| break; |
| } |
| |
| if (div >= max_clk_div) |
| goto err; |
| |
| return 0; |
| |
| err: |
| dev_err(hwa742.fbdev->dev, "can't setup timings\n"); |
| return -1; |
| } |
| |
| static void calc_hwa742_clk_rates(unsigned long ext_clk, |
| unsigned long *sys_clk, unsigned long *pix_clk) |
| { |
| int pix_clk_src; |
| int sys_div = 0, sys_mul = 0; |
| int pix_div; |
| |
| pix_clk_src = hwa742_read_reg(HWA742_CLK_SRC_REG); |
| pix_div = ((pix_clk_src >> 3) & 0x1f) + 1; |
| if ((pix_clk_src & (0x3 << 1)) == 0) { |
| /* Source is the PLL */ |
| sys_div = (hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x3f) + 1; |
| sys_mul = (hwa742_read_reg(HWA742_PLL_4_REG) & 0x7f) + 1; |
| *sys_clk = ext_clk * sys_mul / sys_div; |
| } else /* else source is ext clk, or oscillator */ |
| *sys_clk = ext_clk; |
| |
| *pix_clk = *sys_clk / pix_div; /* HZ */ |
| dev_dbg(hwa742.fbdev->dev, |
| "ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n", |
| ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul); |
| dev_dbg(hwa742.fbdev->dev, "sys_clk %ld pix_clk %ld\n", |
| *sys_clk, *pix_clk); |
| } |
| |
| |
| static int setup_tearsync(unsigned long pix_clk, int extif_div) |
| { |
| int hdisp, vdisp; |
| int hndp, vndp; |
| int hsw, vsw; |
| int hs, vs; |
| int hs_pol_inv, vs_pol_inv; |
| int use_hsvs, use_ndp; |
| u8 b; |
| |
| hsw = hwa742_read_reg(HWA742_HS_W_REG); |
| vsw = hwa742_read_reg(HWA742_VS_W_REG); |
| hs_pol_inv = !(hsw & 0x80); |
| vs_pol_inv = !(vsw & 0x80); |
| hsw = hsw & 0x7f; |
| vsw = vsw & 0x3f; |
| |
| hdisp = (hwa742_read_reg(HWA742_H_DISP_REG) & 0x7f) * 8; |
| vdisp = hwa742_read_reg(HWA742_V_DISP_1_REG) + |
| ((hwa742_read_reg(HWA742_V_DISP_2_REG) & 0x3) << 8); |
| |
| hndp = hwa742_read_reg(HWA742_H_NDP_REG) & 0x7f; |
| vndp = hwa742_read_reg(HWA742_V_NDP_REG); |
| |
| /* time to transfer one pixel (16bpp) in ps */ |
| hwa742.pix_tx_time = hwa742.reg_timings.we_cycle_time; |
| if (hwa742.extif->get_max_tx_rate != NULL) { |
| /* |
| * The external interface might have a rate limitation, |
| * if so, we have to maximize our transfer rate. |
| */ |
| unsigned long min_tx_time; |
| unsigned long max_tx_rate = hwa742.extif->get_max_tx_rate(); |
| |
| dev_dbg(hwa742.fbdev->dev, "max_tx_rate %ld HZ\n", |
| max_tx_rate); |
| min_tx_time = 1000000000 / (max_tx_rate / 1000); /* ps */ |
| if (hwa742.pix_tx_time < min_tx_time) |
| hwa742.pix_tx_time = min_tx_time; |
| } |
| |
| /* time to update one line in ps */ |
| hwa742.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000); |
| hwa742.line_upd_time *= 1000; |
| if (hdisp * hwa742.pix_tx_time > hwa742.line_upd_time) |
| /* |
| * transfer speed too low, we might have to use both |
| * HS and VS |
| */ |
| use_hsvs = 1; |
| else |
| /* decent transfer speed, we'll always use only VS */ |
| use_hsvs = 0; |
| |
| if (use_hsvs && (hs_pol_inv || vs_pol_inv)) { |
| /* |
| * HS or'ed with VS doesn't work, use the active high |
| * TE signal based on HNDP / VNDP |
| */ |
| use_ndp = 1; |
| hs_pol_inv = 0; |
| vs_pol_inv = 0; |
| hs = hndp; |
| vs = vndp; |
| } else { |
| /* |
| * Use HS or'ed with VS as a TE signal if both are needed |
| * or VNDP if only vsync is needed. |
| */ |
| use_ndp = 0; |
| hs = hsw; |
| vs = vsw; |
| if (!use_hsvs) { |
| hs_pol_inv = 0; |
| vs_pol_inv = 0; |
| } |
| } |
| |
| hs = hs * 1000000 / (pix_clk / 1000); /* ps */ |
| hs *= 1000; |
| |
| vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000); /* ps */ |
| vs *= 1000; |
| |
| if (vs <= hs) |
| return -EDOM; |
| /* set VS to 120% of HS to minimize VS detection time */ |
| vs = hs * 12 / 10; |
| /* minimize HS too */ |
| hs = 10000; |
| |
| b = hwa742_read_reg(HWA742_NDP_CTRL); |
| b &= ~0x3; |
| b |= use_hsvs ? 1 : 0; |
| b |= (use_ndp && use_hsvs) ? 0 : 2; |
| hwa742_write_reg(HWA742_NDP_CTRL, b); |
| |
| hwa742.vsync_only = !use_hsvs; |
| |
| dev_dbg(hwa742.fbdev->dev, |
| "pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n", |
| pix_clk, hwa742.pix_tx_time, hwa742.line_upd_time); |
| dev_dbg(hwa742.fbdev->dev, |
| "hs %d ps vs %d ps mode %d vsync_only %d\n", |
| hs, vs, (b & 0x3), !use_hsvs); |
| |
| return hwa742.extif->setup_tearsync(1, hs, vs, |
| hs_pol_inv, vs_pol_inv, extif_div); |
| } |
| |
| static void hwa742_get_caps(int plane, struct omapfb_caps *caps) |
| { |
| hwa742.int_ctrl->get_caps(plane, caps); |
| caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE | |
| OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE; |
| if (hwa742.te_connected) |
| caps->ctrl |= OMAPFB_CAPS_TEARSYNC; |
| caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) | |
| (1 << OMAPFB_COLOR_YUV420); |
| } |
| |
| static void hwa742_suspend(void) |
| { |
| hwa742.update_mode_before_suspend = hwa742.update_mode; |
| hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); |
| /* Enable sleep mode */ |
| hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1); |
| clk_disable(hwa742.sys_ck); |
| } |
| |
| static void hwa742_resume(void) |
| { |
| clk_enable(hwa742.sys_ck); |
| |
| /* Disable sleep mode */ |
| hwa742_write_reg(HWA742_POWER_SAVE, 0); |
| while (1) { |
| /* Loop until PLL output is stabilized */ |
| if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7)) |
| break; |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(msecs_to_jiffies(5)); |
| } |
| hwa742_set_update_mode(hwa742.update_mode_before_suspend); |
| } |
| |
| static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, |
| struct omapfb_mem_desc *req_vram) |
| { |
| int r = 0, i; |
| u8 rev, conf; |
| unsigned long ext_clk; |
| unsigned long sys_clk, pix_clk; |
| int extif_mem_div; |
| struct omapfb_platform_data *omapfb_conf; |
| |
| BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl); |
| |
| hwa742.fbdev = fbdev; |
| hwa742.extif = fbdev->ext_if; |
| hwa742.int_ctrl = fbdev->int_ctrl; |
| |
| omapfb_conf = fbdev->dev->platform_data; |
| |
| hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck"); |
| |
| spin_lock_init(&hwa742.req_lock); |
| |
| if ((r = hwa742.int_ctrl->init(fbdev, 1, req_vram)) < 0) |
| goto err1; |
| |
| if ((r = hwa742.extif->init(fbdev)) < 0) |
| goto err2; |
| |
| ext_clk = clk_get_rate(hwa742.sys_ck); |
| if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) |
| goto err3; |
| hwa742.extif->set_timings(&hwa742.reg_timings); |
| clk_enable(hwa742.sys_ck); |
| |
| calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); |
| if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) |
| goto err4; |
| hwa742.extif->set_timings(&hwa742.reg_timings); |
| |
| rev = hwa742_read_reg(HWA742_REV_CODE_REG); |
| if ((rev & 0xfc) != 0x80) { |
| dev_err(fbdev->dev, "HWA742: invalid revision %02x\n", rev); |
| r = -ENODEV; |
| goto err4; |
| } |
| |
| |
| if (!(hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x80)) { |
| dev_err(fbdev->dev, |
| "HWA742: controller not initialized by the bootloader\n"); |
| r = -ENODEV; |
| goto err4; |
| } |
| |
| if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) { |
| dev_err(hwa742.fbdev->dev, |
| "HWA742: can't setup tearing synchronization\n"); |
| goto err4; |
| } |
| hwa742.te_connected = 1; |
| |
| hwa742.max_transmit_size = hwa742.extif->max_transmit_size; |
| |
| hwa742.update_mode = OMAPFB_UPDATE_DISABLED; |
| |
| hwa742.auto_update_window.x = 0; |
| hwa742.auto_update_window.y = 0; |
| hwa742.auto_update_window.width = fbdev->panel->x_res; |
| hwa742.auto_update_window.height = fbdev->panel->y_res; |
| hwa742.auto_update_window.format = 0; |
| |
| init_timer(&hwa742.auto_update_timer); |
| hwa742.auto_update_timer.function = hwa742_update_window_auto; |
| hwa742.auto_update_timer.data = 0; |
| |
| hwa742.prev_color_mode = -1; |
| hwa742.prev_flags = 0; |
| |
| hwa742.fbdev = fbdev; |
| |
| INIT_LIST_HEAD(&hwa742.free_req_list); |
| INIT_LIST_HEAD(&hwa742.pending_req_list); |
| for (i = 0; i < ARRAY_SIZE(hwa742.req_pool); i++) |
| list_add(&hwa742.req_pool[i].entry, &hwa742.free_req_list); |
| BUG_ON(i <= IRQ_REQ_POOL_SIZE); |
| sema_init(&hwa742.req_sema, i - IRQ_REQ_POOL_SIZE); |
| |
| conf = hwa742_read_reg(HWA742_CONFIG_REG); |
| dev_info(fbdev->dev, ": Epson HWA742 LCD controller rev %d " |
| "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); |
| |
| return 0; |
| err4: |
| clk_disable(hwa742.sys_ck); |
| err3: |
| hwa742.extif->cleanup(); |
| err2: |
| hwa742.int_ctrl->cleanup(); |
| err1: |
| return r; |
| } |
| |
| static void hwa742_cleanup(void) |
| { |
| hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); |
| hwa742.extif->cleanup(); |
| hwa742.int_ctrl->cleanup(); |
| clk_disable(hwa742.sys_ck); |
| } |
| |
| struct lcd_ctrl hwa742_ctrl = { |
| .name = "hwa742", |
| .init = hwa742_init, |
| .cleanup = hwa742_cleanup, |
| .bind_client = hwa742_bind_client, |
| .get_caps = hwa742_get_caps, |
| .set_update_mode = hwa742_set_update_mode, |
| .get_update_mode = hwa742_get_update_mode, |
| .setup_plane = hwa742_setup_plane, |
| .enable_plane = hwa742_enable_plane, |
| .update_window = hwa742_update_window_async, |
| .sync = hwa742_sync, |
| .suspend = hwa742_suspend, |
| .resume = hwa742_resume, |
| }; |
| |