ARM: at91: dt: at91sam9: add mmc pinctrl support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 8d1fdfa..e9efb34 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -220,6 +220,30 @@
};
};
+ mmc0 {
+ pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
+ atmel,pins =
+ <0 17 0x1 0x0 /* PA17 periph A */
+ 0 16 0x1 0x1 /* PA16 periph A with pullup */
+ 0 15 0x1 0x1>; /* PA15 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <0 18 0x1 0x1 /* PA18 periph A with pullup */
+ 0 19 0x1 0x1 /* PA19 periph A with pullup */
+ 0 20 0x1 0x1>; /* PA20 periph A with pullup */
+ };
+
+ pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
+ atmel,pins =
+ <0 11 0x2 0x1 /* PA11 periph B with pullup */
+ 0 12 0x2 0x1 /* PA12 periph B with pullup */
+ 0 13 0x2 0x1 /* PA13 periph B with pullup */
+ 0 14 0x2 0x1>; /* PA14 periph B with pullup */
+ };
+ };
+
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;