| /* |
| * Copyright © 2013 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Shobhit Kumar <shobhit.kumar@intel.com> |
| * Yogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include "intel_drv.h" |
| #include "i915_drv.h" |
| #include "intel_dsi.h" |
| |
| struct dsi_mnp { |
| u32 dsi_pll_ctrl; |
| u32 dsi_pll_div; |
| }; |
| |
| static const u16 lfsr_converts[] = { |
| 426, 469, 234, 373, 442, 221, 110, 311, 411, /* 62 - 70 */ |
| 461, 486, 243, 377, 188, 350, 175, 343, 427, 213, /* 71 - 80 */ |
| 106, 53, 282, 397, 454, 227, 113, 56, 284, 142, /* 81 - 90 */ |
| 71, 35, 273, 136, 324, 418, 465, 488, 500, 506 /* 91 - 100 */ |
| }; |
| |
| /* Get DSI clock from pixel clock */ |
| static u32 dsi_clk_from_pclk(u32 pclk, enum mipi_dsi_pixel_format fmt, |
| int lane_count) |
| { |
| u32 dsi_clk_khz; |
| u32 bpp = mipi_dsi_pixel_format_to_bpp(fmt); |
| |
| /* DSI data rate = pixel clock * bits per pixel / lane count |
| pixel clock is converted from KHz to Hz */ |
| dsi_clk_khz = DIV_ROUND_CLOSEST(pclk * bpp, lane_count); |
| |
| return dsi_clk_khz; |
| } |
| |
| static int dsi_calc_mnp(struct drm_i915_private *dev_priv, |
| struct dsi_mnp *dsi_mnp, int target_dsi_clk) |
| { |
| unsigned int calc_m = 0, calc_p = 0; |
| unsigned int m_min, m_max, p_min = 2, p_max = 6; |
| unsigned int m, n, p; |
| int ref_clk; |
| int delta = target_dsi_clk; |
| u32 m_seed; |
| |
| /* target_dsi_clk is expected in kHz */ |
| if (target_dsi_clk < 300000 || target_dsi_clk > 1150000) { |
| DRM_ERROR("DSI CLK Out of Range\n"); |
| return -ECHRNG; |
| } |
| |
| if (IS_CHERRYVIEW(dev_priv)) { |
| ref_clk = 100000; |
| n = 4; |
| m_min = 70; |
| m_max = 96; |
| } else { |
| ref_clk = 25000; |
| n = 1; |
| m_min = 62; |
| m_max = 92; |
| } |
| |
| for (m = m_min; m <= m_max && delta; m++) { |
| for (p = p_min; p <= p_max && delta; p++) { |
| /* |
| * Find the optimal m and p divisors with minimal delta |
| * +/- the required clock |
| */ |
| int calc_dsi_clk = (m * ref_clk) / (p * n); |
| int d = abs(target_dsi_clk - calc_dsi_clk); |
| if (d < delta) { |
| delta = d; |
| calc_m = m; |
| calc_p = p; |
| } |
| } |
| } |
| |
| /* register has log2(N1), this works fine for powers of two */ |
| n = ffs(n) - 1; |
| m_seed = lfsr_converts[calc_m - 62]; |
| dsi_mnp->dsi_pll_ctrl = 1 << (DSI_PLL_P1_POST_DIV_SHIFT + calc_p - 2); |
| dsi_mnp->dsi_pll_div = n << DSI_PLL_N1_DIV_SHIFT | |
| m_seed << DSI_PLL_M1_DIV_SHIFT; |
| |
| return 0; |
| } |
| |
| /* |
| * XXX: The muxing and gating is hard coded for now. Need to add support for |
| * sharing PLLs with two DSI outputs. |
| */ |
| static void vlv_configure_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| int ret; |
| struct dsi_mnp dsi_mnp; |
| u32 dsi_clk; |
| |
| dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format, |
| intel_dsi->lane_count); |
| |
| ret = dsi_calc_mnp(dev_priv, &dsi_mnp, dsi_clk); |
| if (ret) { |
| DRM_DEBUG_KMS("dsi_calc_mnp failed\n"); |
| return; |
| } |
| |
| if (intel_dsi->ports & (1 << PORT_A)) |
| dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI0_DSIPLL; |
| |
| if (intel_dsi->ports & (1 << PORT_C)) |
| dsi_mnp.dsi_pll_ctrl |= DSI_PLL_CLK_GATE_DSI1_DSIPLL; |
| |
| DRM_DEBUG_KMS("dsi pll div %08x, ctrl %08x\n", |
| dsi_mnp.dsi_pll_div, dsi_mnp.dsi_pll_ctrl); |
| |
| vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, 0); |
| vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_DIVIDER, dsi_mnp.dsi_pll_div); |
| vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, dsi_mnp.dsi_pll_ctrl); |
| } |
| |
| static void vlv_enable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| u32 tmp; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| vlv_configure_dsi_pll(encoder); |
| |
| /* wait at least 0.5 us after ungating before enabling VCO */ |
| usleep_range(1, 10); |
| |
| tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL); |
| tmp |= DSI_PLL_VCO_EN; |
| vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp); |
| |
| if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) & |
| DSI_PLL_LOCK, 20)) { |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| DRM_ERROR("DSI PLL lock failed\n"); |
| return; |
| } |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| DRM_DEBUG_KMS("DSI PLL locked\n"); |
| } |
| |
| static void vlv_disable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| u32 tmp; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| |
| tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL); |
| tmp &= ~DSI_PLL_VCO_EN; |
| tmp |= DSI_PLL_LDO_GATE; |
| vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp); |
| |
| mutex_unlock(&dev_priv->sb_lock); |
| } |
| |
| static bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv) |
| { |
| bool enabled; |
| u32 val; |
| u32 mask; |
| |
| mask = BXT_DSI_PLL_DO_ENABLE | BXT_DSI_PLL_LOCKED; |
| val = I915_READ(BXT_DSI_PLL_ENABLE); |
| enabled = (val & mask) == mask; |
| |
| if (!enabled) |
| return false; |
| |
| /* |
| * Both dividers must be programmed with valid values even if only one |
| * of the PLL is used, see BSpec/Broxton Clocks. Check this here for |
| * paranoia, since BIOS is known to misconfigure PLLs in this way at |
| * times, and since accessing DSI registers with invalid dividers |
| * causes a system hang. |
| */ |
| val = I915_READ(BXT_DSI_PLL_CTL); |
| if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) { |
| DRM_DEBUG_DRIVER("PLL is enabled with invalid divider settings (%08x)\n", |
| val); |
| enabled = false; |
| } |
| |
| return enabled; |
| } |
| |
| static void bxt_disable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| u32 val; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| val = I915_READ(BXT_DSI_PLL_ENABLE); |
| val &= ~BXT_DSI_PLL_DO_ENABLE; |
| I915_WRITE(BXT_DSI_PLL_ENABLE, val); |
| |
| /* |
| * PLL lock should deassert within 200us. |
| * Wait up to 1ms before timing out. |
| */ |
| if (wait_for((I915_READ(BXT_DSI_PLL_ENABLE) |
| & BXT_DSI_PLL_LOCKED) == 0, 1)) |
| DRM_ERROR("Timeout waiting for PLL lock deassertion\n"); |
| } |
| |
| static void assert_bpp_mismatch(enum mipi_dsi_pixel_format fmt, int pipe_bpp) |
| { |
| int bpp = mipi_dsi_pixel_format_to_bpp(fmt); |
| |
| WARN(bpp != pipe_bpp, |
| "bpp match assertion failure (expected %d, current %d)\n", |
| bpp, pipe_bpp); |
| } |
| |
| static u32 vlv_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| u32 dsi_clock, pclk; |
| u32 pll_ctl, pll_div; |
| u32 m = 0, p = 0, n; |
| int refclk = IS_CHERRYVIEW(dev_priv) ? 100000 : 25000; |
| int i; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| mutex_lock(&dev_priv->sb_lock); |
| pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL); |
| pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER); |
| mutex_unlock(&dev_priv->sb_lock); |
| |
| /* mask out other bits and extract the P1 divisor */ |
| pll_ctl &= DSI_PLL_P1_POST_DIV_MASK; |
| pll_ctl = pll_ctl >> (DSI_PLL_P1_POST_DIV_SHIFT - 2); |
| |
| /* N1 divisor */ |
| n = (pll_div & DSI_PLL_N1_DIV_MASK) >> DSI_PLL_N1_DIV_SHIFT; |
| n = 1 << n; /* register has log2(N1) */ |
| |
| /* mask out the other bits and extract the M1 divisor */ |
| pll_div &= DSI_PLL_M1_DIV_MASK; |
| pll_div = pll_div >> DSI_PLL_M1_DIV_SHIFT; |
| |
| while (pll_ctl) { |
| pll_ctl = pll_ctl >> 1; |
| p++; |
| } |
| p--; |
| |
| if (!p) { |
| DRM_ERROR("wrong P1 divisor\n"); |
| return 0; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(lfsr_converts); i++) { |
| if (lfsr_converts[i] == pll_div) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(lfsr_converts)) { |
| DRM_ERROR("wrong m_seed programmed\n"); |
| return 0; |
| } |
| |
| m = i + 62; |
| |
| dsi_clock = (m * refclk) / (p * n); |
| |
| /* pixel_format and pipe_bpp should agree */ |
| assert_bpp_mismatch(intel_dsi->pixel_format, pipe_bpp); |
| |
| pclk = DIV_ROUND_CLOSEST(dsi_clock * intel_dsi->lane_count, pipe_bpp); |
| |
| return pclk; |
| } |
| |
| static u32 bxt_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) |
| { |
| u32 pclk; |
| u32 dsi_clk; |
| u32 dsi_ratio; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| |
| /* Divide by zero */ |
| if (!pipe_bpp) { |
| DRM_ERROR("Invalid BPP(0)\n"); |
| return 0; |
| } |
| |
| dsi_ratio = I915_READ(BXT_DSI_PLL_CTL) & |
| BXT_DSI_PLL_RATIO_MASK; |
| |
| /* Invalid DSI ratio ? */ |
| if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN || |
| dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { |
| DRM_ERROR("Invalid DSI pll ratio(%u) programmed\n", dsi_ratio); |
| return 0; |
| } |
| |
| dsi_clk = (dsi_ratio * BXT_REF_CLOCK_KHZ) / 2; |
| |
| /* pixel_format and pipe_bpp should agree */ |
| assert_bpp_mismatch(intel_dsi->pixel_format, pipe_bpp); |
| |
| pclk = DIV_ROUND_CLOSEST(dsi_clk * intel_dsi->lane_count, pipe_bpp); |
| |
| DRM_DEBUG_DRIVER("Calculated pclk=%u\n", pclk); |
| return pclk; |
| } |
| |
| u32 intel_dsi_get_pclk(struct intel_encoder *encoder, int pipe_bpp) |
| { |
| if (IS_BROXTON(encoder->base.dev)) |
| return bxt_dsi_get_pclk(encoder, pipe_bpp); |
| else |
| return vlv_dsi_get_pclk(encoder, pipe_bpp); |
| } |
| |
| static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) |
| { |
| u32 temp; |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| |
| temp = I915_READ(MIPI_CTRL(port)); |
| temp &= ~ESCAPE_CLOCK_DIVIDER_MASK; |
| I915_WRITE(MIPI_CTRL(port), temp | |
| intel_dsi->escape_clk_div << |
| ESCAPE_CLOCK_DIVIDER_SHIFT); |
| } |
| |
| /* Program BXT Mipi clocks and dividers */ |
| static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) |
| { |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| u32 tmp; |
| u32 dsi_rate = 0; |
| u32 pll_ratio = 0; |
| u32 rx_div; |
| u32 tx_div; |
| u32 rx_div_upper; |
| u32 rx_div_lower; |
| u32 mipi_8by3_divider; |
| |
| /* Clear old configurations */ |
| tmp = I915_READ(BXT_MIPI_CLOCK_CTL); |
| tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); |
| tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port)); |
| tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); |
| tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)); |
| |
| /* Get the current DSI rate(actual) */ |
| pll_ratio = I915_READ(BXT_DSI_PLL_CTL) & |
| BXT_DSI_PLL_RATIO_MASK; |
| dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2; |
| |
| /* |
| * tx clock should be <= 20MHz and the div value must be |
| * subtracted by 1 as per bspec |
| */ |
| tx_div = DIV_ROUND_UP(dsi_rate, 20000) - 1; |
| /* |
| * rx clock should be <= 150MHz and the div value must be |
| * subtracted by 1 as per bspec |
| */ |
| rx_div = DIV_ROUND_UP(dsi_rate, 150000) - 1; |
| |
| /* |
| * rx divider value needs to be updated in the |
| * two differnt bit fields in the register hence splitting the |
| * rx divider value accordingly |
| */ |
| rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2; |
| rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2; |
| |
| /* As per bpsec program the 8/3X clock divider to the below value */ |
| if (dev_priv->vbt.dsi.config->is_cmd_mode) |
| mipi_8by3_divider = 0x2; |
| else |
| mipi_8by3_divider = 0x3; |
| |
| tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider); |
| tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div); |
| tmp |= BXT_MIPI_RX_ESCLK_LOWER_DIVIDER(port, rx_div_lower); |
| tmp |= BXT_MIPI_RX_ESCLK_UPPER_DIVIDER(port, rx_div_upper); |
| |
| I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); |
| } |
| |
| static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| u8 dsi_ratio; |
| u32 dsi_clk; |
| u32 val; |
| |
| dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format, |
| intel_dsi->lane_count); |
| |
| /* |
| * From clock diagram, to get PLL ratio divider, divide double of DSI |
| * link rate (i.e., 2*8x=16x frequency value) by ref clock. Make sure to |
| * round 'up' the result |
| */ |
| dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ); |
| if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN || |
| dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { |
| DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n"); |
| return false; |
| } |
| |
| /* |
| * Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x |
| * Spec says both have to be programmed, even if one is not getting |
| * used. Configure MIPI_CLOCK_CTL dividers in modeset |
| */ |
| val = I915_READ(BXT_DSI_PLL_CTL); |
| val &= ~BXT_DSI_PLL_PVD_RATIO_MASK; |
| val &= ~BXT_DSI_FREQ_SEL_MASK; |
| val &= ~BXT_DSI_PLL_RATIO_MASK; |
| val |= (dsi_ratio | BXT_DSIA_16X_BY2 | BXT_DSIC_16X_BY2); |
| |
| /* As per recommendation from hardware team, |
| * Prog PVD ratio =1 if dsi ratio <= 50 |
| */ |
| if (dsi_ratio <= 50) { |
| val &= ~BXT_DSI_PLL_PVD_RATIO_MASK; |
| val |= BXT_DSI_PLL_PVD_RATIO_1; |
| } |
| |
| I915_WRITE(BXT_DSI_PLL_CTL, val); |
| POSTING_READ(BXT_DSI_PLL_CTL); |
| |
| return true; |
| } |
| |
| static void bxt_enable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; |
| struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); |
| enum port port; |
| u32 val; |
| |
| DRM_DEBUG_KMS("\n"); |
| |
| /* Configure PLL vales */ |
| if (!bxt_configure_dsi_pll(encoder)) { |
| DRM_ERROR("Configure DSI PLL failed, abort PLL enable\n"); |
| return; |
| } |
| |
| /* Program TX, RX, Dphy clocks */ |
| for_each_dsi_port(port, intel_dsi->ports) |
| bxt_dsi_program_clocks(encoder->base.dev, port); |
| |
| /* Enable DSI PLL */ |
| val = I915_READ(BXT_DSI_PLL_ENABLE); |
| val |= BXT_DSI_PLL_DO_ENABLE; |
| I915_WRITE(BXT_DSI_PLL_ENABLE, val); |
| |
| /* Timeout and fail if PLL not locked */ |
| if (wait_for(I915_READ(BXT_DSI_PLL_ENABLE) & BXT_DSI_PLL_LOCKED, 1)) { |
| DRM_ERROR("Timed out waiting for DSI PLL to lock\n"); |
| return; |
| } |
| |
| DRM_DEBUG_KMS("DSI PLL locked\n"); |
| } |
| |
| bool intel_dsi_pll_is_enabled(struct drm_i915_private *dev_priv) |
| { |
| if (IS_BROXTON(dev_priv)) |
| return bxt_dsi_pll_is_enabled(dev_priv); |
| |
| MISSING_CASE(INTEL_DEVID(dev_priv)); |
| |
| return false; |
| } |
| |
| void intel_enable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| |
| if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
| vlv_enable_dsi_pll(encoder); |
| else if (IS_BROXTON(dev)) |
| bxt_enable_dsi_pll(encoder); |
| } |
| |
| void intel_disable_dsi_pll(struct intel_encoder *encoder) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| |
| if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
| vlv_disable_dsi_pll(encoder); |
| else if (IS_BROXTON(dev)) |
| bxt_disable_dsi_pll(encoder); |
| } |
| |
| static void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) |
| { |
| u32 tmp; |
| struct drm_device *dev = encoder->base.dev; |
| struct drm_i915_private *dev_priv = dev->dev_private; |
| |
| /* Clear old configurations */ |
| tmp = I915_READ(BXT_MIPI_CLOCK_CTL); |
| tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); |
| tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port)); |
| tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); |
| tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)); |
| I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); |
| I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); |
| } |
| |
| void intel_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) |
| { |
| struct drm_device *dev = encoder->base.dev; |
| |
| if (IS_BROXTON(dev)) |
| bxt_dsi_reset_clocks(encoder, port); |
| else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) |
| vlv_dsi_reset_clocks(encoder, port); |
| } |