| /* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver. |
| * |
| * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) |
| */ |
| |
| #ifndef __ASM_SPARC_FLOPPY_H |
| #define __ASM_SPARC_FLOPPY_H |
| |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| #include <asm/idprom.h> |
| #include <asm/machines.h> |
| #include <asm/oplib.h> |
| #include <asm/auxio.h> |
| #include <asm/irq.h> |
| |
| /* We don't need no stinkin' I/O port allocation crap. */ |
| #undef release_region |
| #undef request_region |
| #define release_region(X, Y) do { } while(0) |
| #define request_region(X, Y, Z) (1) |
| |
| /* References: |
| * 1) Netbsd Sun floppy driver. |
| * 2) NCR 82077 controller manual |
| * 3) Intel 82077 controller manual |
| */ |
| struct sun_flpy_controller { |
| volatile unsigned char status_82072; /* Main Status reg. */ |
| #define dcr_82072 status_82072 /* Digital Control reg. */ |
| #define status1_82077 status_82072 /* Auxiliary Status reg. 1 */ |
| |
| volatile unsigned char data_82072; /* Data fifo. */ |
| #define status2_82077 data_82072 /* Auxiliary Status reg. 2 */ |
| |
| volatile unsigned char dor_82077; /* Digital Output reg. */ |
| volatile unsigned char tapectl_82077; /* What the? Tape control reg? */ |
| |
| volatile unsigned char status_82077; /* Main Status Register. */ |
| #define drs_82077 status_82077 /* Digital Rate Select reg. */ |
| |
| volatile unsigned char data_82077; /* Data fifo. */ |
| volatile unsigned char ___unused; |
| volatile unsigned char dir_82077; /* Digital Input reg. */ |
| #define dcr_82077 dir_82077 /* Config Control reg. */ |
| }; |
| |
| /* You'll only ever find one controller on a SparcStation anyways. */ |
| static struct sun_flpy_controller *sun_fdc = NULL; |
| volatile unsigned char *fdc_status; |
| |
| struct sun_floppy_ops { |
| unsigned char (*fd_inb)(int port); |
| void (*fd_outb)(unsigned char value, int port); |
| }; |
| |
| static struct sun_floppy_ops sun_fdops; |
| |
| #define fd_inb(port) sun_fdops.fd_inb(port) |
| #define fd_outb(value,port) sun_fdops.fd_outb(value,port) |
| #define fd_enable_dma() sun_fd_enable_dma() |
| #define fd_disable_dma() sun_fd_disable_dma() |
| #define fd_request_dma() (0) /* nothing... */ |
| #define fd_free_dma() /* nothing... */ |
| #define fd_clear_dma_ff() /* nothing... */ |
| #define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode) |
| #define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr) |
| #define fd_set_dma_count(count) sun_fd_set_dma_count(count) |
| #define fd_enable_irq() /* nothing... */ |
| #define fd_disable_irq() /* nothing... */ |
| #define fd_cacheflush(addr, size) /* nothing... */ |
| #define fd_request_irq() sun_fd_request_irq() |
| #define fd_free_irq() /* nothing... */ |
| #if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */ |
| #define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size)) |
| #define fd_dma_mem_free(addr,size) (vfree((void *)(addr))) |
| #endif |
| |
| #define FLOPPY_MOTOR_MASK 0x10 |
| |
| /* XXX This isn't really correct. XXX */ |
| #define get_dma_residue(x) (0) |
| |
| #define FLOPPY0_TYPE 4 |
| #define FLOPPY1_TYPE 0 |
| |
| /* Super paranoid... */ |
| #undef HAVE_DISABLE_HLT |
| |
| /* Here is where we catch the floppy driver trying to initialize, |
| * therefore this is where we call the PROM device tree probing |
| * routine etc. on the Sparc. |
| */ |
| #define FDC1 sun_floppy_init() |
| |
| #define N_FDC 1 |
| #define N_DRIVE 8 |
| |
| /* No 64k boundary crossing problems on the Sparc. */ |
| #define CROSS_64KB(a,s) (0) |
| |
| /* Routines unique to each controller type on a Sun. */ |
| static unsigned char sun_82072_fd_inb(int port) |
| { |
| udelay(5); |
| switch(port & 7) { |
| default: |
| printk("floppy: Asked to read unknown port %d\n", port); |
| panic("floppy: Port bolixed."); |
| case 4: /* FD_STATUS */ |
| return sun_fdc->status_82072 & ~STATUS_DMA; |
| case 5: /* FD_DATA */ |
| return sun_fdc->data_82072; |
| case 7: /* FD_DIR */ |
| return (get_auxio() & AUXIO_FLPY_DCHG)? 0x80: 0; |
| }; |
| panic("sun_82072_fd_inb: How did I get here?"); |
| } |
| |
| static void sun_82072_fd_outb(unsigned char value, int port) |
| { |
| udelay(5); |
| switch(port & 7) { |
| default: |
| printk("floppy: Asked to write to unknown port %d\n", port); |
| panic("floppy: Port bolixed."); |
| case 2: /* FD_DOR */ |
| /* Oh geese, 82072 on the Sun has no DOR register, |
| * the functionality is implemented via the AUXIO |
| * I/O register. So we must emulate the behavior. |
| * |
| * ASSUMPTIONS: There will only ever be one floppy |
| * drive attached to a Sun controller |
| * and it will be at drive zero. |
| */ |
| { |
| unsigned bits = 0; |
| if (value & 0x10) bits |= AUXIO_FLPY_DSEL; |
| if ((value & 0x80) == 0) bits |= AUXIO_FLPY_EJCT; |
| set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT)); |
| } |
| break; |
| case 5: /* FD_DATA */ |
| sun_fdc->data_82072 = value; |
| break; |
| case 7: /* FD_DCR */ |
| sun_fdc->dcr_82072 = value; |
| break; |
| case 4: /* FD_STATUS */ |
| sun_fdc->status_82072 = value; |
| break; |
| }; |
| return; |
| } |
| |
| static unsigned char sun_82077_fd_inb(int port) |
| { |
| udelay(5); |
| switch(port & 7) { |
| default: |
| printk("floppy: Asked to read unknown port %d\n", port); |
| panic("floppy: Port bolixed."); |
| case 4: /* FD_STATUS */ |
| return sun_fdc->status_82077 & ~STATUS_DMA; |
| case 5: /* FD_DATA */ |
| return sun_fdc->data_82077; |
| case 7: /* FD_DIR */ |
| /* XXX: Is DCL on 0x80 in sun4m? */ |
| return sun_fdc->dir_82077; |
| }; |
| panic("sun_82072_fd_inb: How did I get here?"); |
| } |
| |
| static void sun_82077_fd_outb(unsigned char value, int port) |
| { |
| udelay(5); |
| switch(port & 7) { |
| default: |
| printk("floppy: Asked to write to unknown port %d\n", port); |
| panic("floppy: Port bolixed."); |
| case 2: /* FD_DOR */ |
| /* Happily, the 82077 has a real DOR register. */ |
| sun_fdc->dor_82077 = value; |
| break; |
| case 5: /* FD_DATA */ |
| sun_fdc->data_82077 = value; |
| break; |
| case 7: /* FD_DCR */ |
| sun_fdc->dcr_82077 = value; |
| break; |
| case 4: /* FD_STATUS */ |
| sun_fdc->status_82077 = value; |
| break; |
| }; |
| return; |
| } |
| |
| /* For pseudo-dma (Sun floppy drives have no real DMA available to |
| * them so we must eat the data fifo bytes directly ourselves) we have |
| * three state variables. doing_pdma tells our inline low-level |
| * assembly floppy interrupt entry point whether it should sit and eat |
| * bytes from the fifo or just transfer control up to the higher level |
| * floppy interrupt c-code. I tried very hard but I could not get the |
| * pseudo-dma to work in c-code without getting many overruns and |
| * underruns. If non-zero, doing_pdma encodes the direction of |
| * the transfer for debugging. 1=read 2=write |
| */ |
| char *pdma_vaddr; |
| unsigned long pdma_size; |
| volatile int doing_pdma = 0; |
| |
| /* This is software state */ |
| char *pdma_base = NULL; |
| unsigned long pdma_areasize; |
| |
| /* Common routines to all controller types on the Sparc. */ |
| static __inline__ void virtual_dma_init(void) |
| { |
| /* nothing... */ |
| } |
| |
| static __inline__ void sun_fd_disable_dma(void) |
| { |
| doing_pdma = 0; |
| if (pdma_base) { |
| mmu_unlockarea(pdma_base, pdma_areasize); |
| pdma_base = NULL; |
| } |
| } |
| |
| static __inline__ void sun_fd_set_dma_mode(int mode) |
| { |
| switch(mode) { |
| case DMA_MODE_READ: |
| doing_pdma = 1; |
| break; |
| case DMA_MODE_WRITE: |
| doing_pdma = 2; |
| break; |
| default: |
| printk("Unknown dma mode %d\n", mode); |
| panic("floppy: Giving up..."); |
| } |
| } |
| |
| static __inline__ void sun_fd_set_dma_addr(char *buffer) |
| { |
| pdma_vaddr = buffer; |
| } |
| |
| static __inline__ void sun_fd_set_dma_count(int length) |
| { |
| pdma_size = length; |
| } |
| |
| static __inline__ void sun_fd_enable_dma(void) |
| { |
| pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); |
| pdma_base = pdma_vaddr; |
| pdma_areasize = pdma_size; |
| } |
| |
| /* Our low-level entry point in arch/sparc/kernel/entry.S */ |
| irqreturn_t floppy_hardint(int irq, void *unused, struct pt_regs *regs); |
| |
| static int sun_fd_request_irq(void) |
| { |
| static int once = 0; |
| int error; |
| |
| if(!once) { |
| once = 1; |
| error = request_fast_irq(FLOPPY_IRQ, floppy_hardint, SA_INTERRUPT, "floppy"); |
| return ((error == 0) ? 0 : -1); |
| } else return 0; |
| } |
| |
| static struct linux_prom_registers fd_regs[2]; |
| |
| static int sun_floppy_init(void) |
| { |
| char state[128]; |
| int tnode, fd_node, num_regs; |
| struct resource r; |
| |
| use_virtual_dma = 1; |
| |
| FLOPPY_IRQ = 11; |
| /* Forget it if we aren't on a machine that could possibly |
| * ever have a floppy drive. |
| */ |
| if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) || |
| ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) || |
| (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) { |
| /* We certainly don't have a floppy controller. */ |
| goto no_sun_fdc; |
| } |
| /* Well, try to find one. */ |
| tnode = prom_getchild(prom_root_node); |
| fd_node = prom_searchsiblings(tnode, "obio"); |
| if(fd_node != 0) { |
| tnode = prom_getchild(fd_node); |
| fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo"); |
| } else { |
| fd_node = prom_searchsiblings(tnode, "fd"); |
| } |
| if(fd_node == 0) { |
| goto no_sun_fdc; |
| } |
| |
| /* The sun4m lets us know if the controller is actually usable. */ |
| if(sparc_cpu_model == sun4m && |
| prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) { |
| if(!strcmp(state, "disabled")) { |
| goto no_sun_fdc; |
| } |
| } |
| num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs)); |
| num_regs = (num_regs / sizeof(fd_regs[0])); |
| prom_apply_obio_ranges(fd_regs, num_regs); |
| memset(&r, 0, sizeof(r)); |
| r.flags = fd_regs[0].which_io; |
| r.start = fd_regs[0].phys_addr; |
| sun_fdc = (struct sun_flpy_controller *) |
| sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); |
| |
| /* Last minute sanity check... */ |
| if(sun_fdc->status_82072 == 0xff) { |
| sun_fdc = NULL; |
| goto no_sun_fdc; |
| } |
| |
| if(sparc_cpu_model == sun4c) { |
| sun_fdops.fd_inb = sun_82072_fd_inb; |
| sun_fdops.fd_outb = sun_82072_fd_outb; |
| fdc_status = &sun_fdc->status_82072; |
| /* printk("AUXIO @0x%lx\n", auxio_register); */ /* P3 */ |
| } else { |
| sun_fdops.fd_inb = sun_82077_fd_inb; |
| sun_fdops.fd_outb = sun_82077_fd_outb; |
| fdc_status = &sun_fdc->status_82077; |
| /* printk("DOR @0x%p\n", &sun_fdc->dor_82077); */ /* P3 */ |
| } |
| |
| /* Success... */ |
| allowed_drive_mask = 0x01; |
| return (int) sun_fdc; |
| |
| no_sun_fdc: |
| return -1; |
| } |
| |
| static int sparc_eject(void) |
| { |
| set_dor(0x00, 0xff, 0x90); |
| udelay(500); |
| set_dor(0x00, 0x6f, 0x00); |
| udelay(500); |
| return 0; |
| } |
| |
| #define fd_eject(drive) sparc_eject() |
| |
| #define EXTRA_FLOPPY_PARAMS |
| |
| #endif /* !(__ASM_SPARC_FLOPPY_H) */ |