| /* |
| * drivers/video/asiliantfb.c |
| * frame buffer driver for Asiliant 69000 chip |
| * Copyright (C) 2001-2003 Saito.K & Jeanne |
| * |
| * from driver/video/chipsfb.c and, |
| * |
| * drivers/video/asiliantfb.c -- frame buffer device for |
| * Asiliant 69030 chip (formerly Intel, formerly Chips & Technologies) |
| * Author: apc@agelectronics.co.uk |
| * Copyright (C) 2000 AG Electronics |
| * Note: the data sheets don't seem to be available from Asiliant. |
| * They are available by searching developer.intel.com, but are not otherwise |
| * linked to. |
| * |
| * This driver should be portable with minimal effort to the 69000 display |
| * chip, and to the twin-display mode of the 69030. |
| * Contains code from Thomas Hhenleitner <th@visuelle-maschinen.de> (thanks) |
| * |
| * Derived from the CT65550 driver chipsfb.c: |
| * Copyright (C) 1998 Paul Mackerras |
| * ...which was derived from the Powermac "chips" driver: |
| * Copyright (C) 1997 Fabio Riccardi. |
| * And from the frame buffer device for Open Firmware-initialized devices: |
| * Copyright (C) 1997 Geert Uytterhoeven. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| |
| /* Built in clock of the 69030 */ |
| static const unsigned Fref = 14318180; |
| |
| #define mmio_base (p->screen_base + 0x400000) |
| |
| #define mm_write_ind(num, val, ap, dp) do { \ |
| writeb((num), mmio_base + (ap)); writeb((val), mmio_base + (dp)); \ |
| } while (0) |
| |
| static void mm_write_xr(struct fb_info *p, u8 reg, u8 data) |
| { |
| mm_write_ind(reg, data, 0x7ac, 0x7ad); |
| } |
| #define write_xr(num, val) mm_write_xr(p, num, val) |
| |
| static void mm_write_fr(struct fb_info *p, u8 reg, u8 data) |
| { |
| mm_write_ind(reg, data, 0x7a0, 0x7a1); |
| } |
| #define write_fr(num, val) mm_write_fr(p, num, val) |
| |
| static void mm_write_cr(struct fb_info *p, u8 reg, u8 data) |
| { |
| mm_write_ind(reg, data, 0x7a8, 0x7a9); |
| } |
| #define write_cr(num, val) mm_write_cr(p, num, val) |
| |
| static void mm_write_gr(struct fb_info *p, u8 reg, u8 data) |
| { |
| mm_write_ind(reg, data, 0x79c, 0x79d); |
| } |
| #define write_gr(num, val) mm_write_gr(p, num, val) |
| |
| static void mm_write_sr(struct fb_info *p, u8 reg, u8 data) |
| { |
| mm_write_ind(reg, data, 0x788, 0x789); |
| } |
| #define write_sr(num, val) mm_write_sr(p, num, val) |
| |
| static void mm_write_ar(struct fb_info *p, u8 reg, u8 data) |
| { |
| readb(mmio_base + 0x7b4); |
| mm_write_ind(reg, data, 0x780, 0x780); |
| } |
| #define write_ar(num, val) mm_write_ar(p, num, val) |
| |
| static int asiliantfb_pci_init(struct pci_dev *dp, const struct pci_device_id *); |
| static int asiliantfb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info); |
| static int asiliantfb_set_par(struct fb_info *info); |
| static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *info); |
| |
| static struct fb_ops asiliantfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = asiliantfb_check_var, |
| .fb_set_par = asiliantfb_set_par, |
| .fb_setcolreg = asiliantfb_setcolreg, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| }; |
| |
| /* Calculate the ratios for the dot clocks without using a single long long |
| * value */ |
| static void asiliant_calc_dclk2(u32 *ppixclock, u8 *dclk2_m, u8 *dclk2_n, u8 *dclk2_div) |
| { |
| unsigned pixclock = *ppixclock; |
| unsigned Ftarget = 1000000 * (1000000 / pixclock); |
| unsigned n; |
| unsigned best_error = 0xffffffff; |
| unsigned best_m = 0xffffffff, |
| best_n = 0xffffffff; |
| unsigned ratio; |
| unsigned remainder; |
| unsigned char divisor = 0; |
| |
| /* Calculate the frequency required. This is hard enough. */ |
| ratio = 1000000 / pixclock; |
| remainder = 1000000 % pixclock; |
| Ftarget = 1000000 * ratio + (1000000 * remainder) / pixclock; |
| |
| while (Ftarget < 100000000) { |
| divisor += 0x10; |
| Ftarget <<= 1; |
| } |
| |
| ratio = Ftarget / Fref; |
| remainder = Ftarget % Fref; |
| |
| /* This expresses the constraint that 150kHz <= Fref/n <= 5Mhz, |
| * together with 3 <= n <= 257. */ |
| for (n = 3; n <= 257; n++) { |
| unsigned m = n * ratio + (n * remainder) / Fref; |
| |
| /* 3 <= m <= 257 */ |
| if (m >= 3 && m <= 257) { |
| unsigned new_error = ((Ftarget * n) - (Fref * m)) >= 0 ? |
| ((Ftarget * n) - (Fref * m)) : ((Fref * m) - (Ftarget * n)); |
| if (new_error < best_error) { |
| best_n = n; |
| best_m = m; |
| best_error = new_error; |
| } |
| } |
| /* But if VLD = 4, then 4m <= 1028 */ |
| else if (m <= 1028) { |
| /* remember there are still only 8-bits of precision in m, so |
| * avoid over-optimistic error calculations */ |
| unsigned new_error = ((Ftarget * n) - (Fref * (m & ~3))) >= 0 ? |
| ((Ftarget * n) - (Fref * (m & ~3))) : ((Fref * (m & ~3)) - (Ftarget * n)); |
| if (new_error < best_error) { |
| best_n = n; |
| best_m = m; |
| best_error = new_error; |
| } |
| } |
| } |
| if (best_m > 257) |
| best_m >>= 2; /* divide m by 4, and leave VCO loop divide at 4 */ |
| else |
| divisor |= 4; /* or set VCO loop divide to 1 */ |
| *dclk2_m = best_m - 2; |
| *dclk2_n = best_n - 2; |
| *dclk2_div = divisor; |
| *ppixclock = pixclock; |
| return; |
| } |
| |
| static void asiliant_set_timing(struct fb_info *p) |
| { |
| unsigned hd = p->var.xres / 8; |
| unsigned hs = (p->var.xres + p->var.right_margin) / 8; |
| unsigned he = (p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; |
| unsigned ht = (p->var.left_margin + p->var.xres + p->var.right_margin + p->var.hsync_len) / 8; |
| unsigned vd = p->var.yres; |
| unsigned vs = p->var.yres + p->var.lower_margin; |
| unsigned ve = p->var.yres + p->var.lower_margin + p->var.vsync_len; |
| unsigned vt = p->var.upper_margin + p->var.yres + p->var.lower_margin + p->var.vsync_len; |
| unsigned wd = (p->var.xres_virtual * ((p->var.bits_per_pixel+7)/8)) / 8; |
| |
| if ((p->var.xres == 640) && (p->var.yres == 480) && (p->var.pixclock == 39722)) { |
| write_fr(0x01, 0x02); /* LCD */ |
| } else { |
| write_fr(0x01, 0x01); /* CRT */ |
| } |
| |
| write_cr(0x11, (ve - 1) & 0x0f); |
| write_cr(0x00, (ht - 5) & 0xff); |
| write_cr(0x01, hd - 1); |
| write_cr(0x02, hd); |
| write_cr(0x03, ((ht - 1) & 0x1f) | 0x80); |
| write_cr(0x04, hs); |
| write_cr(0x05, (((ht - 1) & 0x20) <<2) | (he & 0x1f)); |
| write_cr(0x3c, (ht - 1) & 0xc0); |
| write_cr(0x06, (vt - 2) & 0xff); |
| write_cr(0x30, (vt - 2) >> 8); |
| write_cr(0x07, 0x00); |
| write_cr(0x08, 0x00); |
| write_cr(0x09, 0x00); |
| write_cr(0x10, (vs - 1) & 0xff); |
| write_cr(0x32, ((vs - 1) >> 8) & 0xf); |
| write_cr(0x11, ((ve - 1) & 0x0f) | 0x80); |
| write_cr(0x12, (vd - 1) & 0xff); |
| write_cr(0x31, ((vd - 1) & 0xf00) >> 8); |
| write_cr(0x13, wd & 0xff); |
| write_cr(0x41, (wd & 0xf00) >> 8); |
| write_cr(0x15, (vs - 1) & 0xff); |
| write_cr(0x33, ((vs - 1) >> 8) & 0xf); |
| write_cr(0x38, ((ht - 5) & 0x100) >> 8); |
| write_cr(0x16, (vt - 1) & 0xff); |
| write_cr(0x18, 0x00); |
| |
| if (p->var.xres == 640) { |
| writeb(0xc7, mmio_base + 0x784); /* set misc output reg */ |
| } else { |
| writeb(0x07, mmio_base + 0x784); /* set misc output reg */ |
| } |
| } |
| |
| static int asiliantfb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *p) |
| { |
| unsigned long Ftarget, ratio, remainder; |
| |
| ratio = 1000000 / var->pixclock; |
| remainder = 1000000 % var->pixclock; |
| Ftarget = 1000000 * ratio + (1000000 * remainder) / var->pixclock; |
| |
| /* First check the constraint that the maximum post-VCO divisor is 32, |
| * and the maximum Fvco is 220MHz */ |
| if (Ftarget > 220000000 || Ftarget < 3125000) { |
| printk(KERN_ERR "asiliantfb dotclock must be between 3.125 and 220MHz\n"); |
| return -ENXIO; |
| } |
| var->xres_virtual = var->xres; |
| var->yres_virtual = var->yres; |
| |
| if (var->bits_per_pixel == 24) { |
| var->red.offset = 16; |
| var->green.offset = 8; |
| var->blue.offset = 0; |
| var->red.length = var->blue.length = var->green.length = 8; |
| } else if (var->bits_per_pixel == 16) { |
| switch (var->red.offset) { |
| case 11: |
| var->green.length = 6; |
| break; |
| case 10: |
| var->green.length = 5; |
| break; |
| default: |
| return -EINVAL; |
| } |
| var->green.offset = 5; |
| var->blue.offset = 0; |
| var->red.length = var->blue.length = 5; |
| } else if (var->bits_per_pixel == 8) { |
| var->red.offset = var->green.offset = var->blue.offset = 0; |
| var->red.length = var->green.length = var->blue.length = 8; |
| } |
| return 0; |
| } |
| |
| static int asiliantfb_set_par(struct fb_info *p) |
| { |
| u8 dclk2_m; /* Holds m-2 value for register */ |
| u8 dclk2_n; /* Holds n-2 value for register */ |
| u8 dclk2_div; /* Holds divisor bitmask */ |
| |
| /* Set pixclock */ |
| asiliant_calc_dclk2(&p->var.pixclock, &dclk2_m, &dclk2_n, &dclk2_div); |
| |
| /* Set color depth */ |
| if (p->var.bits_per_pixel == 24) { |
| write_xr(0x81, 0x16); /* 24 bit packed color mode */ |
| write_xr(0x82, 0x00); /* Disable palettes */ |
| write_xr(0x20, 0x20); /* 24 bit blitter mode */ |
| } else if (p->var.bits_per_pixel == 16) { |
| if (p->var.red.offset == 11) |
| write_xr(0x81, 0x15); /* 16 bit color mode */ |
| else |
| write_xr(0x81, 0x14); /* 15 bit color mode */ |
| write_xr(0x82, 0x00); /* Disable palettes */ |
| write_xr(0x20, 0x10); /* 16 bit blitter mode */ |
| } else if (p->var.bits_per_pixel == 8) { |
| write_xr(0x0a, 0x02); /* Linear */ |
| write_xr(0x81, 0x12); /* 8 bit color mode */ |
| write_xr(0x82, 0x00); /* Graphics gamma enable */ |
| write_xr(0x20, 0x00); /* 8 bit blitter mode */ |
| } |
| p->fix.line_length = p->var.xres * (p->var.bits_per_pixel >> 3); |
| p->fix.visual = (p->var.bits_per_pixel == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; |
| write_xr(0xc4, dclk2_m); |
| write_xr(0xc5, dclk2_n); |
| write_xr(0xc7, dclk2_div); |
| /* Set up the CR registers */ |
| asiliant_set_timing(p); |
| return 0; |
| } |
| |
| static int asiliantfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *p) |
| { |
| if (regno > 255) |
| return 1; |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| |
| /* Set hardware palete */ |
| writeb(regno, mmio_base + 0x790); |
| udelay(1); |
| writeb(red, mmio_base + 0x791); |
| writeb(green, mmio_base + 0x791); |
| writeb(blue, mmio_base + 0x791); |
| |
| if (regno < 16) { |
| switch(p->var.red.offset) { |
| case 10: /* RGB 555 */ |
| ((u32 *)(p->pseudo_palette))[regno] = |
| ((red & 0xf8) << 7) | |
| ((green & 0xf8) << 2) | |
| ((blue & 0xf8) >> 3); |
| break; |
| case 11: /* RGB 565 */ |
| ((u32 *)(p->pseudo_palette))[regno] = |
| ((red & 0xf8) << 8) | |
| ((green & 0xfc) << 3) | |
| ((blue & 0xf8) >> 3); |
| break; |
| case 16: /* RGB 888 */ |
| ((u32 *)(p->pseudo_palette))[regno] = |
| (red << 16) | |
| (green << 8) | |
| (blue); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| struct chips_init_reg { |
| unsigned char addr; |
| unsigned char data; |
| }; |
| |
| static struct chips_init_reg chips_init_sr[] = |
| { |
| {0x00, 0x03}, /* Reset register */ |
| {0x01, 0x01}, /* Clocking mode */ |
| {0x02, 0x0f}, /* Plane mask */ |
| {0x04, 0x0e} /* Memory mode */ |
| }; |
| |
| static struct chips_init_reg chips_init_gr[] = |
| { |
| {0x03, 0x00}, /* Data rotate */ |
| {0x05, 0x00}, /* Graphics mode */ |
| {0x06, 0x01}, /* Miscellaneous */ |
| {0x08, 0x00} /* Bit mask */ |
| }; |
| |
| static struct chips_init_reg chips_init_ar[] = |
| { |
| {0x10, 0x01}, /* Mode control */ |
| {0x11, 0x00}, /* Overscan */ |
| {0x12, 0x0f}, /* Memory plane enable */ |
| {0x13, 0x00} /* Horizontal pixel panning */ |
| }; |
| |
| static struct chips_init_reg chips_init_cr[] = |
| { |
| {0x0c, 0x00}, /* Start address high */ |
| {0x0d, 0x00}, /* Start address low */ |
| {0x40, 0x00}, /* Extended Start Address */ |
| {0x41, 0x00}, /* Extended Start Address */ |
| {0x14, 0x00}, /* Underline location */ |
| {0x17, 0xe3}, /* CRT mode control */ |
| {0x70, 0x00} /* Interlace control */ |
| }; |
| |
| |
| static struct chips_init_reg chips_init_fr[] = |
| { |
| {0x01, 0x02}, |
| {0x03, 0x08}, |
| {0x08, 0xcc}, |
| {0x0a, 0x08}, |
| {0x18, 0x00}, |
| {0x1e, 0x80}, |
| {0x40, 0x83}, |
| {0x41, 0x00}, |
| {0x48, 0x13}, |
| {0x4d, 0x60}, |
| {0x4e, 0x0f}, |
| |
| {0x0b, 0x01}, |
| |
| {0x21, 0x51}, |
| {0x22, 0x1d}, |
| {0x23, 0x5f}, |
| {0x20, 0x4f}, |
| {0x34, 0x00}, |
| {0x24, 0x51}, |
| {0x25, 0x00}, |
| {0x27, 0x0b}, |
| {0x26, 0x00}, |
| {0x37, 0x80}, |
| {0x33, 0x0b}, |
| {0x35, 0x11}, |
| {0x36, 0x02}, |
| {0x31, 0xea}, |
| {0x32, 0x0c}, |
| {0x30, 0xdf}, |
| {0x10, 0x0c}, |
| {0x11, 0xe0}, |
| {0x12, 0x50}, |
| {0x13, 0x00}, |
| {0x16, 0x03}, |
| {0x17, 0xbd}, |
| {0x1a, 0x00}, |
| }; |
| |
| |
| static struct chips_init_reg chips_init_xr[] = |
| { |
| {0xce, 0x00}, /* set default memory clock */ |
| {0xcc, 200 }, /* MCLK ratio M */ |
| {0xcd, 18 }, /* MCLK ratio N */ |
| {0xce, 0x90}, /* MCLK divisor = 2 */ |
| |
| {0xc4, 209 }, |
| {0xc5, 118 }, |
| {0xc7, 32 }, |
| {0xcf, 0x06}, |
| {0x09, 0x01}, /* IO Control - CRT controller extensions */ |
| {0x0a, 0x02}, /* Frame buffer mapping */ |
| {0x0b, 0x01}, /* PCI burst write */ |
| {0x40, 0x03}, /* Memory access control */ |
| {0x80, 0x82}, /* Pixel pipeline configuration 0 */ |
| {0x81, 0x12}, /* Pixel pipeline configuration 1 */ |
| {0x82, 0x08}, /* Pixel pipeline configuration 2 */ |
| |
| {0xd0, 0x0f}, |
| {0xd1, 0x01}, |
| }; |
| |
| static void __devinit chips_hw_init(struct fb_info *p) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(chips_init_xr); ++i) |
| write_xr(chips_init_xr[i].addr, chips_init_xr[i].data); |
| write_xr(0x81, 0x12); |
| write_xr(0x82, 0x08); |
| write_xr(0x20, 0x00); |
| for (i = 0; i < ARRAY_SIZE(chips_init_sr); ++i) |
| write_sr(chips_init_sr[i].addr, chips_init_sr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_gr); ++i) |
| write_gr(chips_init_gr[i].addr, chips_init_gr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_ar); ++i) |
| write_ar(chips_init_ar[i].addr, chips_init_ar[i].data); |
| /* Enable video output in attribute index register */ |
| writeb(0x20, mmio_base + 0x780); |
| for (i = 0; i < ARRAY_SIZE(chips_init_cr); ++i) |
| write_cr(chips_init_cr[i].addr, chips_init_cr[i].data); |
| for (i = 0; i < ARRAY_SIZE(chips_init_fr); ++i) |
| write_fr(chips_init_fr[i].addr, chips_init_fr[i].data); |
| } |
| |
| static struct fb_fix_screeninfo asiliantfb_fix __devinitdata = { |
| .id = "Asiliant 69000", |
| .type = FB_TYPE_PACKED_PIXELS, |
| .visual = FB_VISUAL_PSEUDOCOLOR, |
| .accel = FB_ACCEL_NONE, |
| .line_length = 640, |
| .smem_len = 0x200000, /* 2MB */ |
| }; |
| |
| static struct fb_var_screeninfo asiliantfb_var __devinitdata = { |
| .xres = 640, |
| .yres = 480, |
| .xres_virtual = 640, |
| .yres_virtual = 480, |
| .bits_per_pixel = 8, |
| .red = { .length = 8 }, |
| .green = { .length = 8 }, |
| .blue = { .length = 8 }, |
| .height = -1, |
| .width = -1, |
| .vmode = FB_VMODE_NONINTERLACED, |
| .pixclock = 39722, |
| .left_margin = 48, |
| .right_margin = 16, |
| .upper_margin = 33, |
| .lower_margin = 10, |
| .hsync_len = 96, |
| .vsync_len = 2, |
| }; |
| |
| static void __devinit init_asiliant(struct fb_info *p, unsigned long addr) |
| { |
| p->fix = asiliantfb_fix; |
| p->fix.smem_start = addr; |
| p->var = asiliantfb_var; |
| p->fbops = &asiliantfb_ops; |
| p->flags = FBINFO_DEFAULT; |
| |
| fb_alloc_cmap(&p->cmap, 256, 0); |
| |
| if (register_framebuffer(p) < 0) { |
| printk(KERN_ERR "C&T 69000 framebuffer failed to register\n"); |
| return; |
| } |
| |
| printk(KERN_INFO "fb%d: Asiliant 69000 frame buffer (%dK RAM detected)\n", |
| p->node, p->fix.smem_len / 1024); |
| |
| writeb(0xff, mmio_base + 0x78c); |
| chips_hw_init(p); |
| } |
| |
| static int __devinit |
| asiliantfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent) |
| { |
| unsigned long addr, size; |
| struct fb_info *p; |
| |
| if ((dp->resource[0].flags & IORESOURCE_MEM) == 0) |
| return -ENODEV; |
| addr = pci_resource_start(dp, 0); |
| size = pci_resource_len(dp, 0); |
| if (addr == 0) |
| return -ENODEV; |
| if (!request_mem_region(addr, size, "asiliantfb")) |
| return -EBUSY; |
| |
| p = framebuffer_alloc(sizeof(u32) * 16, &dp->dev); |
| if (!p) { |
| release_mem_region(addr, size); |
| return -ENOMEM; |
| } |
| p->pseudo_palette = p->par; |
| p->par = NULL; |
| |
| p->screen_base = ioremap(addr, 0x800000); |
| if (p->screen_base == NULL) { |
| release_mem_region(addr, size); |
| framebuffer_release(p); |
| return -ENOMEM; |
| } |
| |
| pci_write_config_dword(dp, 4, 0x02800083); |
| writeb(3, p->screen_base + 0x400784); |
| |
| init_asiliant(p, addr); |
| |
| pci_set_drvdata(dp, p); |
| return 0; |
| } |
| |
| static void __devexit asiliantfb_remove(struct pci_dev *dp) |
| { |
| struct fb_info *p = pci_get_drvdata(dp); |
| |
| unregister_framebuffer(p); |
| iounmap(p->screen_base); |
| release_mem_region(pci_resource_start(dp, 0), pci_resource_len(dp, 0)); |
| pci_set_drvdata(dp, NULL); |
| framebuffer_release(p); |
| } |
| |
| static struct pci_device_id asiliantfb_pci_tbl[] __devinitdata = { |
| { PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69000, PCI_ANY_ID, PCI_ANY_ID }, |
| { 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, asiliantfb_pci_tbl); |
| |
| static struct pci_driver asiliantfb_driver = { |
| .name = "asiliantfb", |
| .id_table = asiliantfb_pci_tbl, |
| .probe = asiliantfb_pci_init, |
| .remove = __devexit_p(asiliantfb_remove), |
| }; |
| |
| static int __init asiliantfb_init(void) |
| { |
| if (fb_get_options("asiliantfb", NULL)) |
| return -ENODEV; |
| |
| return pci_register_driver(&asiliantfb_driver); |
| } |
| |
| module_init(asiliantfb_init); |
| |
| static void __exit asiliantfb_exit(void) |
| { |
| pci_unregister_driver(&asiliantfb_driver); |
| } |
| |
| MODULE_LICENSE("GPL"); |