arch/mips/oprofile/op_model_mipsxx.c - kernel/msm-4.9 - Gitiles

 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (C) 2004, 05, 06 by Ralf Baechle
  * Copyright (C) 2005 by MIPS Technologies, Inc.
  */
 #include <linux/cpumask.h>
 #include <linux/oprofile.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <asm/irq_regs.h>

 #include "op_impl.h"

 #define M_PERFCTL_EXL			(1UL	  <<  0)
 #define M_PERFCTL_KERNEL		(1UL	  <<  1)
 #define M_PERFCTL_SUPERVISOR		(1UL	  <<  2)
 #define M_PERFCTL_USER			(1UL	  <<  3)
 #define M_PERFCTL_INTERRUPT_ENABLE	(1UL	  <<  4)
 #define M_PERFCTL_EVENT(event)		(((event) & 0x3ff)  << 5)
 #define M_PERFCTL_VPEID(vpe)		((vpe)	  << 16)
 #define M_PERFCTL_MT_EN(filter)		((filter) << 20)
 #define	   M_TC_EN_ALL			M_PERFCTL_MT_EN(0)
 #define	   M_TC_EN_VPE			M_PERFCTL_MT_EN(1)
 #define	   M_TC_EN_TC			M_PERFCTL_MT_EN(2)
 #define M_PERFCTL_TCID(tcid)		((tcid)	  << 22)
 #define M_PERFCTL_WIDE			(1UL	  << 30)
 #define M_PERFCTL_MORE			(1UL	  << 31)

 #define M_COUNTER_OVERFLOW		(1UL	  << 31)

 /* Netlogic XLR specific, count events in all threads in a core */
 #define M_PERFCTL_COUNT_ALL_THREADS	(1UL	  << 13)

 static int (*save_perf_irq)(void);

 /*
  * XLR has only one set of counters per core. Designate the
  * first hardware thread in the core for setup and init.
  * Skip CPUs with non-zero hardware thread id (4 hwt per core)
  */
 #ifdef CONFIG_CPU_XLR
 #define oprofile_skip_cpu(c)	((cpu_logical_map(c) & 0x3) != 0)
 #else
 #define oprofile_skip_cpu(c)	0
 #endif

 #ifdef CONFIG_MIPS_MT_SMP
 static int cpu_has_mipsmt_pertccounters;
 #define WHAT		(M_TC_EN_VPE | \
 			 M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id))
 #define vpe_id()	(cpu_has_mipsmt_pertccounters ? \
 			0 : cpu_data[smp_processor_id()].vpe_id)

 /*
  * The number of bits to shift to convert between counters per core and
  * counters per VPE.  There is no reasonable interface atm to obtain the
  * number of VPEs used by Linux and in the 34K this number is fixed to two
  * anyways so we hardcore a few things here for the moment.  The way it's
  * done here will ensure that oprofile VSMP kernel will run right on a lesser
  * core like a 24K also or with maxcpus=1.
  */
 static inline unsigned int vpe_shift(void)
 {
 	if (num_possible_cpus() > 1)
 		return 1;

 	return 0;
 }

 #else

 #define WHAT		0
 #define vpe_id()	0

 static inline unsigned int vpe_shift(void)
 {
 	return 0;
 }

 #endif

 static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
 {
 	return counters >> vpe_shift();
 }

 static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
 {
 	return counters << vpe_shift();
 }

 #define __define_perf_accessors(r, n, np)				\
 									\
 static inline unsigned int r_c0_ ## r ## n(void)			\
 {									\
 	unsigned int cpu = vpe_id();					\
 									\
 	switch (cpu) {							\
 	case 0:								\
 		return read_c0_ ## r ## n();				\
 	case 1:								\
 		return read_c0_ ## r ## np();				\
 	default:							\
 		BUG();							\
 	}								\
 	return 0;							\
 }									\
 									\
 static inline void w_c0_ ## r ## n(unsigned int value)			\
 {									\
 	unsigned int cpu = vpe_id();					\
 									\
 	switch (cpu) {							\
 	case 0:								\
 		write_c0_ ## r ## n(value);				\
 		return;							\
 	case 1:								\
 		write_c0_ ## r ## np(value);				\
 		return;							\
 	default:							\
 		BUG();							\
 	}								\
 	return;								\
 }									\

 __define_perf_accessors(perfcntr, 0, 2)
 __define_perf_accessors(perfcntr, 1, 3)
 __define_perf_accessors(perfcntr, 2, 0)
 __define_perf_accessors(perfcntr, 3, 1)

 __define_perf_accessors(perfctrl, 0, 2)
 __define_perf_accessors(perfctrl, 1, 3)
 __define_perf_accessors(perfctrl, 2, 0)
 __define_perf_accessors(perfctrl, 3, 1)

 struct op_mips_model op_model_mipsxx_ops;

 static struct mipsxx_register_config {
 	unsigned int control[4];
 	unsigned int counter[4];
 } reg;

 /* Compute all of the registers in preparation for enabling profiling.	*/

 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
 	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	int i;

 	/* Compute the performance counter control word.  */
 	for (i = 0; i < counters; i++) {
 		reg.control[i] = 0;
 		reg.counter[i] = 0;

 		if (!ctr[i].enabled)
 			continue;

 		reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
 				 M_PERFCTL_INTERRUPT_ENABLE;
 		if (ctr[i].kernel)
 			reg.control[i] |= M_PERFCTL_KERNEL;
 		if (ctr[i].user)
 			reg.control[i] |= M_PERFCTL_USER;
 		if (ctr[i].exl)
 			reg.control[i] |= M_PERFCTL_EXL;
 		if (current_cpu_type() == CPU_XLR)
 			reg.control[i] |= M_PERFCTL_COUNT_ALL_THREADS;
 		reg.counter[i] = 0x80000000 - ctr[i].count;
 	}
 }

 /* Program all of the registers in preparation for enabling profiling.	*/

 static void mipsxx_cpu_setup(void *args)
 {
 	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	if (oprofile_skip_cpu(smp_processor_id()))
 		return;

 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(reg.counter[3]);
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(reg.counter[2]);
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(reg.counter[1]);
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(reg.counter[0]);
 	}
 }

 /* Start all counters on current CPU */
 static void mipsxx_cpu_start(void *args)
 {
 	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	if (oprofile_skip_cpu(smp_processor_id()))
 		return;

 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(WHAT | reg.control[3]);
 	case 3:
 		w_c0_perfctrl2(WHAT | reg.control[2]);
 	case 2:
 		w_c0_perfctrl1(WHAT | reg.control[1]);
 	case 1:
 		w_c0_perfctrl0(WHAT | reg.control[0]);
 	}
 }

 /* Stop all counters on current CPU */
 static void mipsxx_cpu_stop(void *args)
 {
 	unsigned int counters = op_model_mipsxx_ops.num_counters;

 	if (oprofile_skip_cpu(smp_processor_id()))
 		return;

 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(0);
 	case 3:
 		w_c0_perfctrl2(0);
 	case 2:
 		w_c0_perfctrl1(0);
 	case 1:
 		w_c0_perfctrl0(0);
 	}
 }

 static int mipsxx_perfcount_handler(void)
 {
 	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	unsigned int control;
 	unsigned int counter;
 	int handled = IRQ_NONE;

 	if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
 		return handled;

 	switch (counters) {
 #define HANDLE_COUNTER(n)						\
 	case n + 1:							\
 		control = r_c0_perfctrl ## n();				\
 		counter = r_c0_perfcntr ## n();				\
 		if ((control & M_PERFCTL_INTERRUPT_ENABLE) &&		\
 		    (counter & M_COUNTER_OVERFLOW)) {			\
 			oprofile_add_sample(get_irq_regs(), n);		\
 			w_c0_perfcntr ## n(reg.counter[n]);		\
 			handled = IRQ_HANDLED;				\
 		}
 	HANDLE_COUNTER(3)
 	HANDLE_COUNTER(2)
 	HANDLE_COUNTER(1)
 	HANDLE_COUNTER(0)
 	}

 	return handled;
 }

 #define M_CONFIG1_PC	(1 << 4)

 static inline int __n_counters(void)
 {
 	if (!(read_c0_config1() & M_CONFIG1_PC))
 		return 0;
 	if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
 		return 1;
 	if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
 		return 2;
 	if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
 		return 3;

 	return 4;
 }

 static inline int n_counters(void)
 {
 	int counters;

 	switch (current_cpu_type()) {
 	case CPU_R10000:
 		counters = 2;
 		break;

 	case CPU_R12000:
 	case CPU_R14000:
 		counters = 4;
 		break;

 	default:
 		counters = __n_counters();
 	}

 	return counters;
 }

 static void reset_counters(void *arg)
 {
 	int counters = (int)(long)arg;
 	switch (counters) {
 	case 4:
 		w_c0_perfctrl3(0);
 		w_c0_perfcntr3(0);
 	case 3:
 		w_c0_perfctrl2(0);
 		w_c0_perfcntr2(0);
 	case 2:
 		w_c0_perfctrl1(0);
 		w_c0_perfcntr1(0);
 	case 1:
 		w_c0_perfctrl0(0);
 		w_c0_perfcntr0(0);
 	}
 }

 static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
 {
 	return mipsxx_perfcount_handler();
 }

 static int __init mipsxx_init(void)
 {
 	int counters;

 	counters = n_counters();
 	if (counters == 0) {
 		printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
 		return -ENODEV;
 	}

 #ifdef CONFIG_MIPS_MT_SMP
 	cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19);
 	if (!cpu_has_mipsmt_pertccounters)
 		counters = counters_total_to_per_cpu(counters);
 #endif
 	on_each_cpu(reset_counters, (void *)(long)counters, 1);

 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_type()) {
 	case CPU_M14KC:
 		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
 		break;

 	case CPU_M14KEC:
 		op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
 		break;

 	case CPU_20KC:
 		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;

 	case CPU_24K:
 		op_model_mipsxx_ops.cpu_type = "mips/24K";
 		break;

 	case CPU_25KF:
 		op_model_mipsxx_ops.cpu_type = "mips/25K";
 		break;

 	case CPU_1004K:
 	case CPU_34K:
 		op_model_mipsxx_ops.cpu_type = "mips/34K";
 		break;

 	case CPU_74K:
 		op_model_mipsxx_ops.cpu_type = "mips/74K";
 		break;

 	case CPU_5KC:
 		op_model_mipsxx_ops.cpu_type = "mips/5K";
 		break;

 	case CPU_R10000:
 		if ((current_cpu_data.processor_id & 0xff) == 0x20)
 			op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
 		else
 			op_model_mipsxx_ops.cpu_type = "mips/r10000";
 		break;

 	case CPU_R12000:
 	case CPU_R14000:
 		op_model_mipsxx_ops.cpu_type = "mips/r12000";
 		break;

 	case CPU_SB1:
 	case CPU_SB1A:
 		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;

 	case CPU_LOONGSON1:
 		op_model_mipsxx_ops.cpu_type = "mips/loongson1";
 		break;

 	case CPU_XLR:
 		op_model_mipsxx_ops.cpu_type = "mips/xlr";
 		break;

 	default:
 		printk(KERN_ERR "Profiling unsupported for this CPU\n");

 		return -ENODEV;
 	}

 	save_perf_irq = perf_irq;
 	perf_irq = mipsxx_perfcount_handler;

 	if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
 		return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
 			0, "Perfcounter", save_perf_irq);

 	return 0;
 }

 static void mipsxx_exit(void)
 {
 	int counters = op_model_mipsxx_ops.num_counters;

 	if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
 		free_irq(cp0_perfcount_irq, save_perf_irq);

 	counters = counters_per_cpu_to_total(counters);
 	on_each_cpu(reset_counters, (void *)(long)counters, 1);

 	perf_irq = save_perf_irq;
 }

 struct op_mips_model op_model_mipsxx_ops = {
 	.reg_setup	= mipsxx_reg_setup,
 	.cpu_setup	= mipsxx_cpu_setup,
 	.init		= mipsxx_init,
 	.exit		= mipsxx_exit,
 	.cpu_start	= mipsxx_cpu_start,
 	.cpu_stop	= mipsxx_cpu_stop,
 };
	/*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (C) 2004, 05, 06 by Ralf Baechle
	* Copyright (C) 2005 by MIPS Technologies, Inc.
	*/
	#include <linux/cpumask.h>
	#include <linux/oprofile.h>
	#include <linux/interrupt.h>
	#include <linux/smp.h>
	#include <asm/irq_regs.h>

	#include "op_impl.h"

	#define M_PERFCTL_EXL (1UL << 0)
	#define M_PERFCTL_KERNEL (1UL << 1)
	#define M_PERFCTL_SUPERVISOR (1UL << 2)
	#define M_PERFCTL_USER (1UL << 3)
	#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
	#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
	#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
	#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
	#define M_TC_EN_ALL M_PERFCTL_MT_EN(0)
	#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
	#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
	#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
	#define M_PERFCTL_WIDE (1UL << 30)
	#define M_PERFCTL_MORE (1UL << 31)

	#define M_COUNTER_OVERFLOW (1UL << 31)

	/* Netlogic XLR specific, count events in all threads in a core */
	#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13)

	static int (*save_perf_irq)(void);

	/*
	* XLR has only one set of counters per core. Designate the
	* first hardware thread in the core for setup and init.
	* Skip CPUs with non-zero hardware thread id (4 hwt per core)
	*/
	#ifdef CONFIG_CPU_XLR
	#define oprofile_skip_cpu(c) ((cpu_logical_map(c) & 0x3) != 0)
	#else
	#define oprofile_skip_cpu(c) 0
	#endif

	#ifdef CONFIG_MIPS_MT_SMP
	static int cpu_has_mipsmt_pertccounters;
	#define WHAT (M_TC_EN_VPE \| \
	M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id))
	#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
	0 : cpu_data[smp_processor_id()].vpe_id)

	/*
	* The number of bits to shift to convert between counters per core and
	* counters per VPE. There is no reasonable interface atm to obtain the
	* number of VPEs used by Linux and in the 34K this number is fixed to two
	* anyways so we hardcore a few things here for the moment. The way it's
	* done here will ensure that oprofile VSMP kernel will run right on a lesser
	* core like a 24K also or with maxcpus=1.
	*/
	static inline unsigned int vpe_shift(void)
	{
	if (num_possible_cpus() > 1)
	return 1;

	return 0;
	}

	#else

	#define WHAT 0
	#define vpe_id() 0

	static inline unsigned int vpe_shift(void)
	{
	return 0;
	}

	#endif

	static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
	{
	return counters >> vpe_shift();
	}

	static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
	{
	return counters << vpe_shift();
	}

	#define __define_perf_accessors(r, n, np) \
	\
	static inline unsigned int r_c0_ ## r ## n(void) \
	{ \
	unsigned int cpu = vpe_id(); \
	\
	switch (cpu) { \
	case 0: \
	return read_c0_ ## r ## n(); \
	case 1: \
	return read_c0_ ## r ## np(); \
	default: \
	BUG(); \
	} \
	return 0; \
	} \
	\
	static inline void w_c0_ ## r ## n(unsigned int value) \
	{ \
	unsigned int cpu = vpe_id(); \
	\
	switch (cpu) { \
	case 0: \
	write_c0_ ## r ## n(value); \
	return; \
	case 1: \
	write_c0_ ## r ## np(value); \
	return; \
	default: \
	BUG(); \
	} \
	return; \
	} \

	__define_perf_accessors(perfcntr, 0, 2)
	__define_perf_accessors(perfcntr, 1, 3)
	__define_perf_accessors(perfcntr, 2, 0)
	__define_perf_accessors(perfcntr, 3, 1)

	__define_perf_accessors(perfctrl, 0, 2)
	__define_perf_accessors(perfctrl, 1, 3)
	__define_perf_accessors(perfctrl, 2, 0)
	__define_perf_accessors(perfctrl, 3, 1)

	struct op_mips_model op_model_mipsxx_ops;

	static struct mipsxx_register_config {
	unsigned int control[4];
	unsigned int counter[4];
	} reg;

	/* Compute all of the registers in preparation for enabling profiling. */

	static void mipsxx_reg_setup(struct op_counter_config *ctr)
	{
	unsigned int counters = op_model_mipsxx_ops.num_counters;
	int i;

	/* Compute the performance counter control word. */
	for (i = 0; i < counters; i++) {
	reg.control[i] = 0;
	reg.counter[i] = 0;

	if (!ctr[i].enabled)
	continue;

	reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) \|
	M_PERFCTL_INTERRUPT_ENABLE;
	if (ctr[i].kernel)
	reg.control[i] \|= M_PERFCTL_KERNEL;
	if (ctr[i].user)
	reg.control[i] \|= M_PERFCTL_USER;
	if (ctr[i].exl)
	reg.control[i] \|= M_PERFCTL_EXL;
	if (current_cpu_type() == CPU_XLR)
	reg.control[i] \|= M_PERFCTL_COUNT_ALL_THREADS;
	reg.counter[i] = 0x80000000 - ctr[i].count;
	}
	}

	/* Program all of the registers in preparation for enabling profiling. */

	static void mipsxx_cpu_setup(void *args)
	{
	unsigned int counters = op_model_mipsxx_ops.num_counters;

	if (oprofile_skip_cpu(smp_processor_id()))
	return;

	switch (counters) {
	case 4:
	w_c0_perfctrl3(0);
	w_c0_perfcntr3(reg.counter[3]);
	case 3:
	w_c0_perfctrl2(0);
	w_c0_perfcntr2(reg.counter[2]);
	case 2:
	w_c0_perfctrl1(0);
	w_c0_perfcntr1(reg.counter[1]);
	case 1:
	w_c0_perfctrl0(0);
	w_c0_perfcntr0(reg.counter[0]);
	}
	}

	/* Start all counters on current CPU */
	static void mipsxx_cpu_start(void *args)
	{
	unsigned int counters = op_model_mipsxx_ops.num_counters;

	if (oprofile_skip_cpu(smp_processor_id()))
	return;

	switch (counters) {
	case 4:
	w_c0_perfctrl3(WHAT \| reg.control[3]);
	case 3:
	w_c0_perfctrl2(WHAT \| reg.control[2]);
	case 2:
	w_c0_perfctrl1(WHAT \| reg.control[1]);
	case 1:
	w_c0_perfctrl0(WHAT \| reg.control[0]);
	}
	}

	/* Stop all counters on current CPU */
	static void mipsxx_cpu_stop(void *args)
	{
	unsigned int counters = op_model_mipsxx_ops.num_counters;

	if (oprofile_skip_cpu(smp_processor_id()))
	return;

	switch (counters) {
	case 4:
	w_c0_perfctrl3(0);
	case 3:
	w_c0_perfctrl2(0);
	case 2:
	w_c0_perfctrl1(0);
	case 1:
	w_c0_perfctrl0(0);
	}
	}

	static int mipsxx_perfcount_handler(void)
	{
	unsigned int counters = op_model_mipsxx_ops.num_counters;
	unsigned int control;
	unsigned int counter;
	int handled = IRQ_NONE;

	if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
	return handled;

	switch (counters) {
	#define HANDLE_COUNTER(n) \
	case n + 1: \
	control = r_c0_perfctrl ## n(); \
	counter = r_c0_perfcntr ## n(); \
	if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \
	(counter & M_COUNTER_OVERFLOW)) { \
	oprofile_add_sample(get_irq_regs(), n); \
	w_c0_perfcntr ## n(reg.counter[n]); \
	handled = IRQ_HANDLED; \
	}
	HANDLE_COUNTER(3)
	HANDLE_COUNTER(2)
	HANDLE_COUNTER(1)
	HANDLE_COUNTER(0)
	}

	return handled;
	}

	#define M_CONFIG1_PC (1 << 4)

	static inline int __n_counters(void)
	{
	if (!(read_c0_config1() & M_CONFIG1_PC))
	return 0;
	if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
	return 1;
	if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
	return 2;
	if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
	return 3;

	return 4;
	}

	static inline int n_counters(void)
	{
	int counters;

	switch (current_cpu_type()) {
	case CPU_R10000:
	counters = 2;
	break;

	case CPU_R12000:
	case CPU_R14000:
	counters = 4;
	break;

	default:
	counters = __n_counters();
	}

	return counters;
	}

	static void reset_counters(void *arg)
	{
	int counters = (int)(long)arg;
	switch (counters) {
	case 4:
	w_c0_perfctrl3(0);
	w_c0_perfcntr3(0);
	case 3:
	w_c0_perfctrl2(0);
	w_c0_perfcntr2(0);
	case 2:
	w_c0_perfctrl1(0);
	w_c0_perfcntr1(0);
	case 1:
	w_c0_perfctrl0(0);
	w_c0_perfcntr0(0);
	}
	}

	static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
	{
	return mipsxx_perfcount_handler();
	}

	static int __init mipsxx_init(void)
	{
	int counters;

	counters = n_counters();
	if (counters == 0) {
	printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
	return -ENODEV;
	}

	#ifdef CONFIG_MIPS_MT_SMP
	cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19);
	if (!cpu_has_mipsmt_pertccounters)
	counters = counters_total_to_per_cpu(counters);
	#endif
	on_each_cpu(reset_counters, (void *)(long)counters, 1);

	op_model_mipsxx_ops.num_counters = counters;
	switch (current_cpu_type()) {
	case CPU_M14KC:
	op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
	break;

	case CPU_M14KEC:
	op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
	break;

	case CPU_20KC:
	op_model_mipsxx_ops.cpu_type = "mips/20K";
	break;

	case CPU_24K:
	op_model_mipsxx_ops.cpu_type = "mips/24K";
	break;

	case CPU_25KF:
	op_model_mipsxx_ops.cpu_type = "mips/25K";
	break;

	case CPU_1004K:
	case CPU_34K:
	op_model_mipsxx_ops.cpu_type = "mips/34K";
	break;

	case CPU_74K:
	op_model_mipsxx_ops.cpu_type = "mips/74K";
	break;

	case CPU_5KC:
	op_model_mipsxx_ops.cpu_type = "mips/5K";
	break;

	case CPU_R10000:
	if ((current_cpu_data.processor_id & 0xff) == 0x20)
	op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
	else
	op_model_mipsxx_ops.cpu_type = "mips/r10000";
	break;

	case CPU_R12000:
	case CPU_R14000:
	op_model_mipsxx_ops.cpu_type = "mips/r12000";
	break;

	case CPU_SB1:
	case CPU_SB1A:
	op_model_mipsxx_ops.cpu_type = "mips/sb1";
	break;

	case CPU_LOONGSON1:
	op_model_mipsxx_ops.cpu_type = "mips/loongson1";
	break;

	case CPU_XLR:
	op_model_mipsxx_ops.cpu_type = "mips/xlr";
	break;

	default:
	printk(KERN_ERR "Profiling unsupported for this CPU\n");

	return -ENODEV;
	}

	save_perf_irq = perf_irq;
	perf_irq = mipsxx_perfcount_handler;

	if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
	return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
	0, "Perfcounter", save_perf_irq);

	return 0;
	}

	static void mipsxx_exit(void)
	{
	int counters = op_model_mipsxx_ops.num_counters;

	if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
	free_irq(cp0_perfcount_irq, save_perf_irq);

	counters = counters_per_cpu_to_total(counters);
	on_each_cpu(reset_counters, (void *)(long)counters, 1);

	perf_irq = save_perf_irq;
	}

	struct op_mips_model op_model_mipsxx_ops = {
	.reg_setup = mipsxx_reg_setup,
	.cpu_setup = mipsxx_cpu_setup,
	.init = mipsxx_init,
	.exit = mipsxx_exit,
	.cpu_start = mipsxx_cpu_start,
	.cpu_stop = mipsxx_cpu_stop,
	};