| /* Copyright (c) 2010, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301, USA. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| #include <linux/i2c/sx150x.h> |
| |
| #define NO_UPDATE_PENDING -1 |
| |
| struct sx150x_device_data { |
| u8 reg_pullup; |
| u8 reg_pulldn; |
| u8 reg_drain; |
| u8 reg_polarity; |
| u8 reg_dir; |
| u8 reg_data; |
| u8 reg_irq_mask; |
| u8 reg_irq_src; |
| u8 reg_sense; |
| u8 reg_clock; |
| u8 reg_misc; |
| u8 reg_reset; |
| u8 ngpios; |
| }; |
| |
| struct sx150x_chip { |
| struct gpio_chip gpio_chip; |
| struct i2c_client *client; |
| const struct sx150x_device_data *dev_cfg; |
| int irq_summary; |
| int irq_base; |
| int irq_update; |
| u32 irq_sense; |
| u32 irq_masked; |
| u32 dev_sense; |
| u32 dev_masked; |
| struct irq_chip irq_chip; |
| struct mutex lock; |
| }; |
| |
| static const struct sx150x_device_data sx150x_devices[] = { |
| [0] = { /* sx1508q */ |
| .reg_pullup = 0x03, |
| .reg_pulldn = 0x04, |
| .reg_drain = 0x05, |
| .reg_polarity = 0x06, |
| .reg_dir = 0x07, |
| .reg_data = 0x08, |
| .reg_irq_mask = 0x09, |
| .reg_irq_src = 0x0c, |
| .reg_sense = 0x0b, |
| .reg_clock = 0x0f, |
| .reg_misc = 0x10, |
| .reg_reset = 0x7d, |
| .ngpios = 8 |
| }, |
| [1] = { /* sx1509q */ |
| .reg_pullup = 0x07, |
| .reg_pulldn = 0x09, |
| .reg_drain = 0x0b, |
| .reg_polarity = 0x0d, |
| .reg_dir = 0x0f, |
| .reg_data = 0x11, |
| .reg_irq_mask = 0x13, |
| .reg_irq_src = 0x19, |
| .reg_sense = 0x17, |
| .reg_clock = 0x1e, |
| .reg_misc = 0x1f, |
| .reg_reset = 0x7d, |
| .ngpios = 16 |
| }, |
| }; |
| |
| static const struct i2c_device_id sx150x_id[] = { |
| {"sx1508q", 0}, |
| {"sx1509q", 1}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, sx150x_id); |
| |
| static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val) |
| { |
| s32 err = i2c_smbus_write_byte_data(client, reg, val); |
| |
| if (err < 0) |
| dev_warn(&client->dev, |
| "i2c write fail: can't write %02x to %02x: %d\n", |
| val, reg, err); |
| return err; |
| } |
| |
| static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val) |
| { |
| s32 err = i2c_smbus_read_byte_data(client, reg); |
| |
| if (err >= 0) |
| *val = err; |
| else |
| dev_warn(&client->dev, |
| "i2c read fail: can't read from %02x: %d\n", |
| reg, err); |
| return err; |
| } |
| |
| static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset) |
| { |
| return (chip->dev_cfg->ngpios == offset); |
| } |
| |
| /* |
| * These utility functions solve the common problem of locating and setting |
| * configuration bits. Configuration bits are grouped into registers |
| * whose indexes increase downwards. For example, with eight-bit registers, |
| * sixteen gpios would have their config bits grouped in the following order: |
| * REGISTER N-1 [ f e d c b a 9 8 ] |
| * N [ 7 6 5 4 3 2 1 0 ] |
| * |
| * For multi-bit configurations, the pattern gets wider: |
| * REGISTER N-3 [ f f e e d d c c ] |
| * N-2 [ b b a a 9 9 8 8 ] |
| * N-1 [ 7 7 6 6 5 5 4 4 ] |
| * N [ 3 3 2 2 1 1 0 0 ] |
| * |
| * Given the address of the starting register 'N', the index of the gpio |
| * whose configuration we seek to change, and the width in bits of that |
| * configuration, these functions allow us to locate the correct |
| * register and mask the correct bits. |
| */ |
| static inline void sx150x_find_cfg(u8 offset, u8 width, |
| u8 *reg, u8 *mask, u8 *shift) |
| { |
| *reg -= offset * width / 8; |
| *mask = (1 << width) - 1; |
| *shift = (offset * width) % 8; |
| *mask <<= *shift; |
| } |
| |
| static s32 sx150x_write_cfg(struct sx150x_chip *chip, |
| u8 offset, u8 width, u8 reg, u8 val) |
| { |
| u8 mask; |
| u8 data; |
| u8 shift; |
| s32 err; |
| |
| sx150x_find_cfg(offset, width, ®, &mask, &shift); |
| err = sx150x_i2c_read(chip->client, reg, &data); |
| if (err < 0) |
| return err; |
| |
| data &= ~mask; |
| data |= (val << shift) & mask; |
| return sx150x_i2c_write(chip->client, reg, data); |
| } |
| |
| static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset) |
| { |
| u8 reg = chip->dev_cfg->reg_data; |
| u8 mask; |
| u8 data; |
| u8 shift; |
| s32 err; |
| |
| sx150x_find_cfg(offset, 1, ®, &mask, &shift); |
| err = sx150x_i2c_read(chip->client, reg, &data); |
| if (err >= 0) |
| err = (data & mask) != 0 ? 1 : 0; |
| |
| return err; |
| } |
| |
| static void sx150x_set_oscio(struct sx150x_chip *chip, int val) |
| { |
| sx150x_i2c_write(chip->client, |
| chip->dev_cfg->reg_clock, |
| (val ? 0x1f : 0x10)); |
| } |
| |
| static void sx150x_set_io(struct sx150x_chip *chip, unsigned offset, int val) |
| { |
| sx150x_write_cfg(chip, |
| offset, |
| 1, |
| chip->dev_cfg->reg_data, |
| (val ? 1 : 0)); |
| } |
| |
| static int sx150x_io_input(struct sx150x_chip *chip, unsigned offset) |
| { |
| return sx150x_write_cfg(chip, |
| offset, |
| 1, |
| chip->dev_cfg->reg_dir, |
| 1); |
| } |
| |
| static int sx150x_io_output(struct sx150x_chip *chip, unsigned offset, int val) |
| { |
| int err; |
| |
| err = sx150x_write_cfg(chip, |
| offset, |
| 1, |
| chip->dev_cfg->reg_data, |
| (val ? 1 : 0)); |
| if (err >= 0) |
| err = sx150x_write_cfg(chip, |
| offset, |
| 1, |
| chip->dev_cfg->reg_dir, |
| 0); |
| return err; |
| } |
| |
| static int sx150x_gpio_get(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sx150x_chip *chip; |
| int status = -EINVAL; |
| |
| chip = container_of(gc, struct sx150x_chip, gpio_chip); |
| |
| if (!offset_is_oscio(chip, offset)) { |
| mutex_lock(&chip->lock); |
| status = sx150x_get_io(chip, offset); |
| mutex_unlock(&chip->lock); |
| } |
| |
| return status; |
| } |
| |
| static void sx150x_gpio_set(struct gpio_chip *gc, unsigned offset, int val) |
| { |
| struct sx150x_chip *chip; |
| |
| chip = container_of(gc, struct sx150x_chip, gpio_chip); |
| |
| mutex_lock(&chip->lock); |
| if (offset_is_oscio(chip, offset)) |
| sx150x_set_oscio(chip, val); |
| else |
| sx150x_set_io(chip, offset, val); |
| mutex_unlock(&chip->lock); |
| } |
| |
| static int sx150x_gpio_direction_input(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sx150x_chip *chip; |
| int status = -EINVAL; |
| |
| chip = container_of(gc, struct sx150x_chip, gpio_chip); |
| |
| if (!offset_is_oscio(chip, offset)) { |
| mutex_lock(&chip->lock); |
| status = sx150x_io_input(chip, offset); |
| mutex_unlock(&chip->lock); |
| } |
| return status; |
| } |
| |
| static int sx150x_gpio_direction_output(struct gpio_chip *gc, |
| unsigned offset, |
| int val) |
| { |
| struct sx150x_chip *chip; |
| int status = 0; |
| |
| chip = container_of(gc, struct sx150x_chip, gpio_chip); |
| |
| if (!offset_is_oscio(chip, offset)) { |
| mutex_lock(&chip->lock); |
| status = sx150x_io_output(chip, offset, val); |
| mutex_unlock(&chip->lock); |
| } |
| return status; |
| } |
| |
| static int sx150x_gpio_to_irq(struct gpio_chip *gc, unsigned offset) |
| { |
| struct sx150x_chip *chip; |
| |
| chip = container_of(gc, struct sx150x_chip, gpio_chip); |
| |
| if (offset >= chip->dev_cfg->ngpios) |
| return -EINVAL; |
| |
| if (chip->irq_base < 0) |
| return -EINVAL; |
| |
| return chip->irq_base + offset; |
| } |
| |
| static void sx150x_irq_mask(struct irq_data *d) |
| { |
| struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); |
| unsigned n; |
| |
| n = d->irq - chip->irq_base; |
| chip->irq_masked |= (1 << n); |
| chip->irq_update = n; |
| } |
| |
| static void sx150x_irq_unmask(struct irq_data *d) |
| { |
| struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); |
| unsigned n; |
| |
| n = d->irq - chip->irq_base; |
| chip->irq_masked &= ~(1 << n); |
| chip->irq_update = n; |
| } |
| |
| static int sx150x_irq_set_type(struct irq_data *d, unsigned int flow_type) |
| { |
| struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); |
| unsigned n, val = 0; |
| |
| if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) |
| return -EINVAL; |
| |
| n = d->irq - chip->irq_base; |
| |
| if (flow_type & IRQ_TYPE_EDGE_RISING) |
| val |= 0x1; |
| if (flow_type & IRQ_TYPE_EDGE_FALLING) |
| val |= 0x2; |
| |
| chip->irq_sense &= ~(3UL << (n * 2)); |
| chip->irq_sense |= val << (n * 2); |
| chip->irq_update = n; |
| return 0; |
| } |
| |
| static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id) |
| { |
| struct sx150x_chip *chip = (struct sx150x_chip *)dev_id; |
| unsigned nhandled = 0; |
| unsigned sub_irq; |
| unsigned n; |
| s32 err; |
| u8 val; |
| int i; |
| |
| for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) { |
| err = sx150x_i2c_read(chip->client, |
| chip->dev_cfg->reg_irq_src - i, |
| &val); |
| if (err < 0) |
| continue; |
| |
| sx150x_i2c_write(chip->client, |
| chip->dev_cfg->reg_irq_src - i, |
| val); |
| for (n = 0; n < 8; ++n) { |
| if (val & (1 << n)) { |
| sub_irq = chip->irq_base + (i * 8) + n; |
| handle_nested_irq(sub_irq); |
| ++nhandled; |
| } |
| } |
| } |
| |
| return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE); |
| } |
| |
| static void sx150x_irq_bus_lock(struct irq_data *d) |
| { |
| struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); |
| |
| mutex_lock(&chip->lock); |
| } |
| |
| static void sx150x_irq_bus_sync_unlock(struct irq_data *d) |
| { |
| struct sx150x_chip *chip = irq_data_get_irq_chip_data(d); |
| unsigned n; |
| |
| if (chip->irq_update == NO_UPDATE_PENDING) |
| goto out; |
| |
| n = chip->irq_update; |
| chip->irq_update = NO_UPDATE_PENDING; |
| |
| /* Avoid updates if nothing changed */ |
| if (chip->dev_sense == chip->irq_sense && |
| chip->dev_sense == chip->irq_masked) |
| goto out; |
| |
| chip->dev_sense = chip->irq_sense; |
| chip->dev_masked = chip->irq_masked; |
| |
| if (chip->irq_masked & (1 << n)) { |
| sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 1); |
| sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, 0); |
| } else { |
| sx150x_write_cfg(chip, n, 1, chip->dev_cfg->reg_irq_mask, 0); |
| sx150x_write_cfg(chip, n, 2, chip->dev_cfg->reg_sense, |
| chip->irq_sense >> (n * 2)); |
| } |
| out: |
| mutex_unlock(&chip->lock); |
| } |
| |
| static void sx150x_init_chip(struct sx150x_chip *chip, |
| struct i2c_client *client, |
| kernel_ulong_t driver_data, |
| struct sx150x_platform_data *pdata) |
| { |
| mutex_init(&chip->lock); |
| |
| chip->client = client; |
| chip->dev_cfg = &sx150x_devices[driver_data]; |
| chip->gpio_chip.label = client->name; |
| chip->gpio_chip.direction_input = sx150x_gpio_direction_input; |
| chip->gpio_chip.direction_output = sx150x_gpio_direction_output; |
| chip->gpio_chip.get = sx150x_gpio_get; |
| chip->gpio_chip.set = sx150x_gpio_set; |
| chip->gpio_chip.to_irq = sx150x_gpio_to_irq; |
| chip->gpio_chip.base = pdata->gpio_base; |
| chip->gpio_chip.can_sleep = 1; |
| chip->gpio_chip.ngpio = chip->dev_cfg->ngpios; |
| if (pdata->oscio_is_gpo) |
| ++chip->gpio_chip.ngpio; |
| |
| chip->irq_chip.name = client->name; |
| chip->irq_chip.irq_mask = sx150x_irq_mask; |
| chip->irq_chip.irq_unmask = sx150x_irq_unmask; |
| chip->irq_chip.irq_set_type = sx150x_irq_set_type; |
| chip->irq_chip.irq_bus_lock = sx150x_irq_bus_lock; |
| chip->irq_chip.irq_bus_sync_unlock = sx150x_irq_bus_sync_unlock; |
| chip->irq_summary = -1; |
| chip->irq_base = -1; |
| chip->irq_masked = ~0; |
| chip->irq_sense = 0; |
| chip->dev_masked = ~0; |
| chip->dev_sense = 0; |
| chip->irq_update = NO_UPDATE_PENDING; |
| } |
| |
| static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg) |
| { |
| int err = 0; |
| unsigned n; |
| |
| for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n) |
| err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8)); |
| return err; |
| } |
| |
| static int sx150x_reset(struct sx150x_chip *chip) |
| { |
| int err; |
| |
| err = i2c_smbus_write_byte_data(chip->client, |
| chip->dev_cfg->reg_reset, |
| 0x12); |
| if (err < 0) |
| return err; |
| |
| err = i2c_smbus_write_byte_data(chip->client, |
| chip->dev_cfg->reg_reset, |
| 0x34); |
| return err; |
| } |
| |
| static int sx150x_init_hw(struct sx150x_chip *chip, |
| struct sx150x_platform_data *pdata) |
| { |
| int err = 0; |
| |
| if (pdata->reset_during_probe) { |
| err = sx150x_reset(chip); |
| if (err < 0) |
| return err; |
| } |
| |
| err = sx150x_i2c_write(chip->client, |
| chip->dev_cfg->reg_misc, |
| 0x01); |
| if (err < 0) |
| return err; |
| |
| err = sx150x_init_io(chip, chip->dev_cfg->reg_pullup, |
| pdata->io_pullup_ena); |
| if (err < 0) |
| return err; |
| |
| err = sx150x_init_io(chip, chip->dev_cfg->reg_pulldn, |
| pdata->io_pulldn_ena); |
| if (err < 0) |
| return err; |
| |
| err = sx150x_init_io(chip, chip->dev_cfg->reg_drain, |
| pdata->io_open_drain_ena); |
| if (err < 0) |
| return err; |
| |
| err = sx150x_init_io(chip, chip->dev_cfg->reg_polarity, |
| pdata->io_polarity); |
| if (err < 0) |
| return err; |
| |
| if (pdata->oscio_is_gpo) |
| sx150x_set_oscio(chip, 0); |
| |
| return err; |
| } |
| |
| static int sx150x_install_irq_chip(struct sx150x_chip *chip, |
| int irq_summary, |
| int irq_base) |
| { |
| int err; |
| unsigned n; |
| unsigned irq; |
| |
| chip->irq_summary = irq_summary; |
| chip->irq_base = irq_base; |
| |
| for (n = 0; n < chip->dev_cfg->ngpios; ++n) { |
| irq = irq_base + n; |
| irq_set_chip_data(irq, chip); |
| irq_set_chip_and_handler(irq, &chip->irq_chip, handle_edge_irq); |
| irq_set_nested_thread(irq, 1); |
| #ifdef CONFIG_ARM |
| set_irq_flags(irq, IRQF_VALID); |
| #else |
| irq_set_noprobe(irq); |
| #endif |
| } |
| |
| err = devm_request_threaded_irq(&chip->client->dev, |
| irq_summary, |
| NULL, |
| sx150x_irq_thread_fn, |
| IRQF_SHARED | IRQF_TRIGGER_FALLING, |
| chip->irq_chip.name, |
| chip); |
| if (err < 0) { |
| chip->irq_summary = -1; |
| chip->irq_base = -1; |
| } |
| |
| return err; |
| } |
| |
| static void sx150x_remove_irq_chip(struct sx150x_chip *chip) |
| { |
| unsigned n; |
| unsigned irq; |
| |
| for (n = 0; n < chip->dev_cfg->ngpios; ++n) { |
| irq = chip->irq_base + n; |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| } |
| } |
| |
| static int sx150x_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| static const u32 i2c_funcs = I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_WRITE_WORD_DATA; |
| struct sx150x_platform_data *pdata; |
| struct sx150x_chip *chip; |
| int rc; |
| |
| pdata = client->dev.platform_data; |
| if (!pdata) |
| return -EINVAL; |
| |
| if (!i2c_check_functionality(client->adapter, i2c_funcs)) |
| return -ENOSYS; |
| |
| chip = devm_kzalloc(&client->dev, |
| sizeof(struct sx150x_chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| sx150x_init_chip(chip, client, id->driver_data, pdata); |
| rc = sx150x_init_hw(chip, pdata); |
| if (rc < 0) |
| return rc; |
| |
| rc = gpiochip_add(&chip->gpio_chip); |
| if (rc) |
| return rc; |
| |
| if (pdata->irq_summary >= 0) { |
| rc = sx150x_install_irq_chip(chip, |
| pdata->irq_summary, |
| pdata->irq_base); |
| if (rc < 0) |
| goto probe_fail_post_gpiochip_add; |
| } |
| |
| i2c_set_clientdata(client, chip); |
| |
| return 0; |
| probe_fail_post_gpiochip_add: |
| WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0); |
| return rc; |
| } |
| |
| static int sx150x_remove(struct i2c_client *client) |
| { |
| struct sx150x_chip *chip; |
| int rc; |
| |
| chip = i2c_get_clientdata(client); |
| rc = gpiochip_remove(&chip->gpio_chip); |
| if (rc < 0) |
| return rc; |
| |
| if (chip->irq_summary >= 0) |
| sx150x_remove_irq_chip(chip); |
| |
| return 0; |
| } |
| |
| static struct i2c_driver sx150x_driver = { |
| .driver = { |
| .name = "sx150x", |
| .owner = THIS_MODULE |
| }, |
| .probe = sx150x_probe, |
| .remove = sx150x_remove, |
| .id_table = sx150x_id, |
| }; |
| |
| static int __init sx150x_init(void) |
| { |
| return i2c_add_driver(&sx150x_driver); |
| } |
| subsys_initcall(sx150x_init); |
| |
| static void __exit sx150x_exit(void) |
| { |
| return i2c_del_driver(&sx150x_driver); |
| } |
| module_exit(sx150x_exit); |
| |
| MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>"); |
| MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("i2c:sx150x"); |